| # | |
| # Generic video config states | |
| # | |
| config VIDEO_V4L2 | |
| tristate | |
| depends on VIDEO_DEV && VIDEO_V4L2_COMMON | |
| default VIDEO_DEV && VIDEO_V4L2_COMMON | |
| config VIDEOBUF_GEN | |
| tristate | |
| config VIDEOBUF_DMA_SG | |
| depends on HAS_DMA | |
| select VIDEOBUF_GEN | |
| tristate | |
| config VIDEOBUF_VMALLOC | |
| select VIDEOBUF_GEN | |
| tristate | |
| config VIDEOBUF_DMA_CONTIG | |
| depends on HAS_DMA | |
| select VIDEOBUF_GEN | |
| tristate | |
| config VIDEOBUF_DVB | |
| tristate | |
| select VIDEOBUF_GEN | |
| config VIDEO_BTCX | |
| depends on PCI | |
| tristate | |
| config VIDEO_TVEEPROM | |
| tristate | |
| depends on I2C | |
| config VIDEO_TUNER | |
| tristate | |
| depends on MEDIA_TUNER | |
| config V4L2_MEM2MEM_DEV | |
| tristate | |
| depends on VIDEOBUF_GEN | |
| # | |
| # Multimedia Video device configuration | |
| # | |
| menuconfig VIDEO_CAPTURE_DRIVERS | |
| bool "Video capture adapters" | |
| depends on VIDEO_V4L2 | |
| default y | |
| ---help--- | |
| Say Y here to enable selecting the video adapters for | |
| webcams, analog TV, and hybrid analog/digital TV. | |
| Some of those devices also supports FM radio. | |
| if VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2 | |
| config VIDEO_ADV_DEBUG | |
| bool "Enable advanced debug functionality" | |
| default n | |
| ---help--- | |
| Say Y here to enable advanced debugging functionality on some | |
| V4L devices. | |
| In doubt, say N. | |
| config VIDEO_FIXED_MINOR_RANGES | |
| bool "Enable old-style fixed minor ranges for video devices" | |
| default n | |
| ---help--- | |
| Say Y here to enable the old-style fixed-range minor assignments. | |
| Only useful if you rely on the old behavior and use mknod instead of udev. | |
| When in doubt, say N. | |
| config VIDEO_HELPER_CHIPS_AUTO | |
| bool "Autoselect pertinent encoders/decoders and other helper chips" | |
| default y if !EXPERT | |
| ---help--- | |
| Most video cards may require additional modules to encode or | |
| decode audio/video standards. This option will autoselect | |
| all pertinent modules to each selected video module. | |
| Unselect this only if you know exactly what you are doing, since | |
| it may break support on some boards. | |
| In doubt, say Y. | |
| config VIDEO_IR_I2C | |
| tristate "I2C module for IR" if !VIDEO_HELPER_CHIPS_AUTO | |
| depends on I2C && RC_CORE | |
| default y | |
| ---help--- | |
| Most boards have an IR chip directly connected via GPIO. However, | |
| some video boards have the IR connected via I2C bus. | |
| If your board doesn't have an I2C IR chip, you may disable this | |
| option. | |
| In doubt, say Y. | |
| # | |
| # Encoder / Decoder module configuration | |
| # | |
| menu "Encoders/decoders and other helper chips" | |
| visible if !VIDEO_HELPER_CHIPS_AUTO | |
| comment "Audio decoders" | |
| config VIDEO_TVAUDIO | |
| tristate "Simple audio decoder chips" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for several audio decoder chips found on some bt8xx boards: | |
| Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300, | |
| tea6320, tea6420, tda8425, ta8874z. | |
| Microchip: pic16c54 based design on ProVideo PV951 board. | |
| To compile this driver as a module, choose M here: the | |
| module will be called tvaudio. | |
| config VIDEO_TDA7432 | |
| tristate "Philips TDA7432 audio processor" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for tda7432 audio decoder chip found on some bt8xx boards. | |
| To compile this driver as a module, choose M here: the | |
| module will be called tda7432. | |
| config VIDEO_TDA9840 | |
| tristate "Philips TDA9840 audio processor" | |
| depends on I2C | |
| ---help--- | |
| Support for tda9840 audio decoder chip found on some Zoran boards. | |
| To compile this driver as a module, choose M here: the | |
| module will be called tda9840. | |
| config VIDEO_TEA6415C | |
| tristate "Philips TEA6415C audio processor" | |
| depends on I2C | |
| ---help--- | |
| Support for tea6415c audio decoder chip found on some bt8xx boards. | |
| To compile this driver as a module, choose M here: the | |
| module will be called tea6415c. | |
| config VIDEO_TEA6420 | |
| tristate "Philips TEA6420 audio processor" | |
| depends on I2C | |
| ---help--- | |
| Support for tea6420 audio decoder chip found on some bt8xx boards. | |
| To compile this driver as a module, choose M here: the | |
| module will be called tea6420. | |
| config VIDEO_MSP3400 | |
| tristate "Micronas MSP34xx audio decoders" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Micronas MSP34xx series of audio decoders. | |
| To compile this driver as a module, choose M here: the | |
| module will be called msp3400. | |
| config VIDEO_CS5345 | |
| tristate "Cirrus Logic CS5345 audio ADC" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Cirrus Logic CS5345 24-bit, 192 kHz | |
| stereo A/D converter. | |
| To compile this driver as a module, choose M here: the | |
| module will be called cs5345. | |
| config VIDEO_CS53L32A | |
| tristate "Cirrus Logic CS53L32A audio ADC" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Cirrus Logic CS53L32A low voltage | |
| stereo A/D converter. | |
| To compile this driver as a module, choose M here: the | |
| module will be called cs53l32a. | |
| config VIDEO_M52790 | |
| tristate "Mitsubishi M52790 A/V switch" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Mitsubishi M52790 A/V switch. | |
| To compile this driver as a module, choose M here: the | |
| module will be called m52790. | |
| config VIDEO_TLV320AIC23B | |
| tristate "Texas Instruments TLV320AIC23B audio codec" | |
| depends on VIDEO_V4L2 && I2C && EXPERIMENTAL | |
| ---help--- | |
| Support for the Texas Instruments TLV320AIC23B audio codec. | |
| To compile this driver as a module, choose M here: the | |
| module will be called tlv320aic23b. | |
| config VIDEO_WM8775 | |
| tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Wolfson Microelectronics WM8775 high | |
| performance stereo A/D Converter with a 4 channel input mixer. | |
| To compile this driver as a module, choose M here: the | |
| module will be called wm8775. | |
| config VIDEO_WM8739 | |
| tristate "Wolfson Microelectronics WM8739 stereo audio ADC" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Wolfson Microelectronics WM8739 | |
| stereo A/D Converter. | |
| To compile this driver as a module, choose M here: the | |
| module will be called wm8739. | |
| config VIDEO_VP27SMPX | |
| tristate "Panasonic VP27s internal MPX" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the internal MPX of the Panasonic VP27s tuner. | |
| To compile this driver as a module, choose M here: the | |
| module will be called vp27smpx. | |
| comment "RDS decoders" | |
| config VIDEO_SAA6588 | |
| tristate "SAA6588 Radio Chip RDS decoder support" | |
| depends on VIDEO_V4L2 && I2C | |
| help | |
| Support for this Radio Data System (RDS) decoder. This allows | |
| seeing radio station identification transmitted using this | |
| standard. | |
| To compile this driver as a module, choose M here: the | |
| module will be called saa6588. | |
| comment "Video decoders" | |
| config VIDEO_ADV7180 | |
| tristate "Analog Devices ADV7180 decoder" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Analog Devices ADV7180 video decoder. | |
| To compile this driver as a module, choose M here: the | |
| module will be called adv7180. | |
| config VIDEO_BT819 | |
| tristate "BT819A VideoStream decoder" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for BT819A video decoder. | |
| To compile this driver as a module, choose M here: the | |
| module will be called bt819. | |
| config VIDEO_BT856 | |
| tristate "BT856 VideoStream decoder" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for BT856 video decoder. | |
| To compile this driver as a module, choose M here: the | |
| module will be called bt856. | |
| config VIDEO_BT866 | |
| tristate "BT866 VideoStream decoder" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for BT866 video decoder. | |
| To compile this driver as a module, choose M here: the | |
| module will be called bt866. | |
| config VIDEO_KS0127 | |
| tristate "KS0127 video decoder" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for KS0127 video decoder. | |
| This chip is used on AverMedia AVS6EYES Zoran-based MJPEG | |
| cards. | |
| To compile this driver as a module, choose M here: the | |
| module will be called ks0127. | |
| config VIDEO_OV7670 | |
| tristate "OmniVision OV7670 sensor support" | |
| depends on I2C && VIDEO_V4L2 | |
| ---help--- | |
| This is a Video4Linux2 sensor-level driver for the OmniVision | |
| OV7670 VGA camera. It currently only works with the M88ALP01 | |
| controller. | |
| config VIDEO_MT9V011 | |
| tristate "Micron mt9v011 sensor support" | |
| depends on I2C && VIDEO_V4L2 | |
| ---help--- | |
| This is a Video4Linux2 sensor-level driver for the Micron | |
| mt0v011 1.3 Mpixel camera. It currently only works with the | |
| em28xx driver. | |
| config VIDEO_TCM825X | |
| tristate "TCM825x camera sensor support" | |
| depends on I2C && VIDEO_V4L2 | |
| ---help--- | |
| This is a driver for the Toshiba TCM825x VGA camera sensor. | |
| It is used for example in Nokia N800. | |
| config VIDEO_SAA7110 | |
| tristate "Philips SAA7110 video decoder" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Philips SAA7110 video decoders. | |
| To compile this driver as a module, choose M here: the | |
| module will be called saa7110. | |
| config VIDEO_SAA711X | |
| tristate "Philips SAA7111/3/4/5 video decoders" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Philips SAA7111/3/4/5 video decoders. | |
| To compile this driver as a module, choose M here: the | |
| module will be called saa7115. | |
| config VIDEO_SAA717X | |
| tristate "Philips SAA7171/3/4 audio/video decoders" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Philips SAA7171/3/4 audio/video decoders. | |
| To compile this driver as a module, choose M here: the | |
| module will be called saa717x. | |
| config VIDEO_SAA7191 | |
| tristate "Philips SAA7191 video decoder" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Philips SAA7191 video decoder. | |
| To compile this driver as a module, choose M here: the | |
| module will be called saa7191. | |
| config VIDEO_TVP514X | |
| tristate "Texas Instruments TVP514x video decoder" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| This is a Video4Linux2 sensor-level driver for the TI TVP5146/47 | |
| decoder. It is currently working with the TI OMAP3 camera | |
| controller. | |
| To compile this driver as a module, choose M here: the | |
| module will be called tvp514x. | |
| config VIDEO_TVP5150 | |
| tristate "Texas Instruments TVP5150 video decoder" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Texas Instruments TVP5150 video decoder. | |
| To compile this driver as a module, choose M here: the | |
| module will be called tvp5150. | |
| config VIDEO_TVP7002 | |
| tristate "Texas Instruments TVP7002 video decoder" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Texas Instruments TVP7002 video decoder. | |
| To compile this driver as a module, choose M here: the | |
| module will be called tvp7002. | |
| config VIDEO_VPX3220 | |
| tristate "vpx3220a, vpx3216b & vpx3214c video decoders" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for VPX322x video decoders. | |
| To compile this driver as a module, choose M here: the | |
| module will be called vpx3220. | |
| comment "Video and audio decoders" | |
| source "drivers/media/video/cx25840/Kconfig" | |
| comment "MPEG video encoders" | |
| config VIDEO_CX2341X | |
| tristate "Conexant CX2341x MPEG encoders" | |
| depends on VIDEO_V4L2 && VIDEO_V4L2_COMMON | |
| ---help--- | |
| Support for the Conexant CX23416 MPEG encoders | |
| and CX23415 MPEG encoder/decoders. | |
| This module currently supports the encoding functions only. | |
| To compile this driver as a module, choose M here: the | |
| module will be called cx2341x. | |
| comment "Video encoders" | |
| config VIDEO_SAA7127 | |
| tristate "Philips SAA7127/9 digital video encoders" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Philips SAA7127/9 digital video encoders. | |
| To compile this driver as a module, choose M here: the | |
| module will be called saa7127. | |
| config VIDEO_SAA7185 | |
| tristate "Philips SAA7185 video encoder" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Philips SAA7185 video encoder. | |
| To compile this driver as a module, choose M here: the | |
| module will be called saa7185. | |
| config VIDEO_ADV7170 | |
| tristate "Analog Devices ADV7170 video encoder" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Analog Devices ADV7170 video encoder driver | |
| To compile this driver as a module, choose M here: the | |
| module will be called adv7170. | |
| config VIDEO_ADV7175 | |
| tristate "Analog Devices ADV7175 video encoder" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Analog Devices ADV7175 video encoder driver | |
| To compile this driver as a module, choose M here: the | |
| module will be called adv7175. | |
| config VIDEO_THS7303 | |
| tristate "THS7303 Video Amplifier" | |
| depends on I2C | |
| help | |
| Support for TI THS7303 video amplifier | |
| To compile this driver as a module, choose M here: the | |
| module will be called ths7303. | |
| config VIDEO_ADV7343 | |
| tristate "ADV7343 video encoder" | |
| depends on I2C | |
| help | |
| Support for Analog Devices I2C bus based ADV7343 encoder. | |
| To compile this driver as a module, choose M here: the | |
| module will be called adv7343. | |
| config VIDEO_AK881X | |
| tristate "AK8813/AK8814 video encoders" | |
| depends on I2C | |
| help | |
| Video output driver for AKM AK8813 and AK8814 TV encoders | |
| comment "Video improvement chips" | |
| config VIDEO_UPD64031A | |
| tristate "NEC Electronics uPD64031A Ghost Reduction" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the NEC Electronics uPD64031A Ghost Reduction | |
| video chip. It is most often found in NTSC TV cards made for | |
| Japan and is used to reduce the 'ghosting' effect that can | |
| be present in analog TV broadcasts. | |
| To compile this driver as a module, choose M here: the | |
| module will be called upd64031a. | |
| config VIDEO_UPD64083 | |
| tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the NEC Electronics uPD64083 3-Dimensional Y/C | |
| separation video chip. It is used to improve the quality of | |
| the colors of a composite signal. | |
| To compile this driver as a module, choose M here: the | |
| module will be called upd64083. | |
| endmenu # encoder / decoder chips | |
| config VIDEO_SH_VOU | |
| tristate "SuperH VOU video output driver" | |
| depends on VIDEO_DEV && ARCH_SHMOBILE | |
| select VIDEOBUF_DMA_CONTIG | |
| help | |
| Support for the Video Output Unit (VOU) on SuperH SoCs. | |
| config VIDEO_VIU | |
| tristate "Freescale VIU Video Driver" | |
| depends on VIDEO_V4L2 && PPC_MPC512x | |
| select VIDEOBUF_DMA_CONTIG | |
| default y | |
| ---help--- | |
| Support for Freescale VIU video driver. This device captures | |
| video data, or overlays video on DIU frame buffer. | |
| Say Y here if you want to enable VIU device on MPC5121e Rev2+. | |
| In doubt, say N. | |
| config VIDEO_VIVI | |
| tristate "Virtual Video Driver" | |
| depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64 | |
| depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE | |
| select FONT_8x16 | |
| select VIDEOBUF_VMALLOC | |
| default n | |
| ---help--- | |
| Enables a virtual video driver. This device shows a color bar | |
| and a timestamp, as a real device would generate by using V4L2 | |
| api. | |
| Say Y here if you want to test video apps or debug V4L devices. | |
| In doubt, say N. | |
| source "drivers/media/video/davinci/Kconfig" | |
| source "drivers/media/video/omap/Kconfig" | |
| source "drivers/media/video/bt8xx/Kconfig" | |
| config VIDEO_PMS | |
| tristate "Mediavision Pro Movie Studio Video For Linux" | |
| depends on ISA && VIDEO_V4L2 | |
| help | |
| Say Y if you have such a thing. | |
| To compile this driver as a module, choose M here: the | |
| module will be called pms. | |
| config VIDEO_BWQCAM | |
| tristate "Quickcam BW Video For Linux" | |
| depends on PARPORT && VIDEO_V4L2 | |
| help | |
| Say Y have if you the black and white version of the QuickCam | |
| camera. See the next option for the color version. | |
| To compile this driver as a module, choose M here: the | |
| module will be called bw-qcam. | |
| config VIDEO_CQCAM | |
| tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)" | |
| depends on EXPERIMENTAL && PARPORT && VIDEO_V4L2 | |
| help | |
| This is the video4linux driver for the colour version of the | |
| Connectix QuickCam. If you have one of these cameras, say Y here, | |
| otherwise say N. This driver does not work with the original | |
| monochrome QuickCam, QuickCam VC or QuickClip. It is also available | |
| as a module (c-qcam). | |
| Read <file:Documentation/video4linux/CQcam.txt> for more information. | |
| config VIDEO_W9966 | |
| tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux" | |
| depends on PARPORT_1284 && PARPORT && VIDEO_V4L2 | |
| help | |
| Video4linux driver for Winbond's w9966 based Webcams. | |
| Currently tested with the LifeView FlyCam Supra. | |
| If you have one of these cameras, say Y here | |
| otherwise say N. | |
| This driver is also available as a module (w9966). | |
| Check out <file:Documentation/video4linux/w9966.txt> for more | |
| information. | |
| source "drivers/media/video/cpia2/Kconfig" | |
| config VIDEO_VINO | |
| tristate "SGI Vino Video For Linux (EXPERIMENTAL)" | |
| depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L2 | |
| select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO | |
| help | |
| Say Y here to build in support for the Vino video input system found | |
| on SGI Indy machines. | |
| source "drivers/media/video/zoran/Kconfig" | |
| config VIDEO_MEYE | |
| tristate "Sony Vaio Picturebook Motion Eye Video For Linux" | |
| depends on PCI && SONY_LAPTOP && VIDEO_V4L2 | |
| ---help--- | |
| This is the video4linux driver for the Motion Eye camera found | |
| in the Vaio Picturebook laptops. Please read the material in | |
| <file:Documentation/video4linux/meye.txt> for more information. | |
| If you say Y or M here, you need to say Y or M to "Sony Laptop | |
| Extras" in the misc device section. | |
| To compile this driver as a module, choose M here: the | |
| module will be called meye. | |
| source "drivers/media/video/saa7134/Kconfig" | |
| config VIDEO_MXB | |
| tristate "Siemens-Nixdorf 'Multimedia eXtension Board'" | |
| depends on PCI && VIDEO_V4L2 && I2C | |
| select VIDEO_SAA7146_VV | |
| select VIDEO_TUNER | |
| select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO | |
| select VIDEO_TDA9840 if VIDEO_HELPER_CHIPS_AUTO | |
| select VIDEO_TEA6415C if VIDEO_HELPER_CHIPS_AUTO | |
| select VIDEO_TEA6420 if VIDEO_HELPER_CHIPS_AUTO | |
| ---help--- | |
| This is a video4linux driver for the 'Multimedia eXtension Board' | |
| TV card by Siemens-Nixdorf. | |
| To compile this driver as a module, choose M here: the | |
| module will be called mxb. | |
| config VIDEO_HEXIUM_ORION | |
| tristate "Hexium HV-PCI6 and Orion frame grabber" | |
| depends on PCI && VIDEO_V4L2 && I2C | |
| select VIDEO_SAA7146_VV | |
| ---help--- | |
| This is a video4linux driver for the Hexium HV-PCI6 and | |
| Orion frame grabber cards by Hexium. | |
| To compile this driver as a module, choose M here: the | |
| module will be called hexium_orion. | |
| config VIDEO_HEXIUM_GEMINI | |
| tristate "Hexium Gemini frame grabber" | |
| depends on PCI && VIDEO_V4L2 && I2C | |
| select VIDEO_SAA7146_VV | |
| ---help--- | |
| This is a video4linux driver for the Hexium Gemini frame | |
| grabber card by Hexium. Please note that the Gemini Dual | |
| card is *not* fully supported. | |
| To compile this driver as a module, choose M here: the | |
| module will be called hexium_gemini. | |
| config VIDEO_TIMBERDALE | |
| tristate "Support for timberdale Video In/LogiWIN" | |
| depends on VIDEO_V4L2 && I2C | |
| select DMA_ENGINE | |
| select TIMB_DMA | |
| select VIDEO_ADV7180 | |
| select VIDEOBUF_DMA_CONTIG | |
| ---help--- | |
| Add support for the Video In peripherial of the timberdale FPGA. | |
| source "drivers/media/video/cx88/Kconfig" | |
| source "drivers/media/video/cx23885/Kconfig" | |
| source "drivers/media/video/au0828/Kconfig" | |
| source "drivers/media/video/ivtv/Kconfig" | |
| source "drivers/media/video/cx18/Kconfig" | |
| source "drivers/media/video/saa7164/Kconfig" | |
| config VIDEO_M32R_AR | |
| tristate "AR devices" | |
| depends on M32R && VIDEO_V4L2 | |
| ---help--- | |
| This is a video4linux driver for the Renesas AR (Artificial Retina) | |
| camera module. | |
| config VIDEO_M32R_AR_M64278 | |
| tristate "AR device with color module M64278(VGA)" | |
| depends on PLAT_M32700UT | |
| select VIDEO_M32R_AR | |
| ---help--- | |
| This is a video4linux driver for the Renesas AR (Artificial | |
| Retina) with M64278E-800 camera module. | |
| This module supports VGA(640x480 pixels) resolutions. | |
| To compile this driver as a module, choose M here: the | |
| module will be called arv. | |
| config VIDEO_CAFE_CCIC | |
| tristate "Marvell 88ALP01 (Cafe) CMOS Camera Controller support" | |
| depends on PCI && I2C && VIDEO_V4L2 | |
| select VIDEO_OV7670 | |
| ---help--- | |
| This is a video4linux2 driver for the Marvell 88ALP01 integrated | |
| CMOS camera controller. This is the controller found on first- | |
| generation OLPC systems. | |
| config VIDEO_SR030PC30 | |
| tristate "SR030PC30 VGA camera sensor support" | |
| depends on I2C && VIDEO_V4L2 | |
| ---help--- | |
| This driver supports SR030PC30 VGA camera from Siliconfile | |
| config VIDEO_VIA_CAMERA | |
| tristate "VIAFB camera controller support" | |
| depends on FB_VIA | |
| select VIDEOBUF_DMA_SG | |
| select VIDEO_OV7670 | |
| help | |
| Driver support for the integrated camera controller in VIA | |
| Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems | |
| with ov7670 sensors. | |
| config SOC_CAMERA | |
| tristate "SoC camera support" | |
| depends on VIDEO_V4L2 && HAS_DMA && I2C | |
| select VIDEOBUF_GEN | |
| help | |
| SoC Camera is a common API to several cameras, not connecting | |
| over a bus like PCI or USB. For example some i2c camera connected | |
| directly to the data bus of an SoC. | |
| config SOC_CAMERA_IMX074 | |
| tristate "imx074 support" | |
| depends on SOC_CAMERA && I2C | |
| help | |
| This driver supports IMX074 cameras from Sony | |
| config SOC_CAMERA_MT9M001 | |
| tristate "mt9m001 support" | |
| depends on SOC_CAMERA && I2C | |
| select GPIO_PCA953X if MT9M001_PCA9536_SWITCH | |
| help | |
| This driver supports MT9M001 cameras from Micron, monochrome | |
| and colour models. | |
| config SOC_CAMERA_MT9M111 | |
| tristate "mt9m111, mt9m112 and mt9m131 support" | |
| depends on SOC_CAMERA && I2C | |
| help | |
| This driver supports MT9M111, MT9M112 and MT9M131 cameras from | |
| Micron/Aptina | |
| config SOC_CAMERA_MT9T031 | |
| tristate "mt9t031 support" | |
| depends on SOC_CAMERA && I2C | |
| help | |
| This driver supports MT9T031 cameras from Micron. | |
| config SOC_CAMERA_MT9T112 | |
| tristate "mt9t112 support" | |
| depends on SOC_CAMERA && I2C | |
| help | |
| This driver supports MT9T112 cameras from Aptina. | |
| config SOC_CAMERA_MT9V022 | |
| tristate "mt9v022 support" | |
| depends on SOC_CAMERA && I2C | |
| select GPIO_PCA953X if MT9V022_PCA9536_SWITCH | |
| help | |
| This driver supports MT9V022 cameras from Micron | |
| config SOC_CAMERA_RJ54N1 | |
| tristate "rj54n1cb0c support" | |
| depends on SOC_CAMERA && I2C | |
| help | |
| This is a rj54n1cb0c video driver | |
| config SOC_CAMERA_TW9910 | |
| tristate "tw9910 support" | |
| depends on SOC_CAMERA && I2C | |
| help | |
| This is a tw9910 video driver | |
| config SOC_CAMERA_PLATFORM | |
| tristate "platform camera support" | |
| depends on SOC_CAMERA | |
| help | |
| This is a generic SoC camera platform driver, useful for testing | |
| config SOC_CAMERA_OV2640 | |
| tristate "ov2640 camera support" | |
| depends on SOC_CAMERA && I2C | |
| help | |
| This is a ov2640 camera driver | |
| config SOC_CAMERA_OV6650 | |
| tristate "ov6650 sensor support" | |
| depends on SOC_CAMERA && I2C | |
| ---help--- | |
| This is a V4L2 SoC camera driver for the OmniVision OV6650 sensor | |
| config SOC_CAMERA_OV772X | |
| tristate "ov772x camera support" | |
| depends on SOC_CAMERA && I2C | |
| help | |
| This is a ov772x camera driver | |
| config SOC_CAMERA_OV9640 | |
| tristate "ov9640 camera support" | |
| depends on SOC_CAMERA && I2C | |
| help | |
| This is a ov9640 camera driver | |
| config MX1_VIDEO | |
| bool | |
| config VIDEO_MX1 | |
| tristate "i.MX1/i.MXL CMOS Sensor Interface driver" | |
| depends on VIDEO_DEV && ARCH_MX1 && SOC_CAMERA | |
| select FIQ | |
| select VIDEOBUF_DMA_CONTIG | |
| select MX1_VIDEO | |
| ---help--- | |
| This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface | |
| config MX3_VIDEO | |
| bool | |
| config VIDEO_MX3 | |
| tristate "i.MX3x Camera Sensor Interface driver" | |
| depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA | |
| select VIDEOBUF_DMA_CONTIG | |
| select MX3_VIDEO | |
| ---help--- | |
| This is a v4l2 driver for the i.MX3x Camera Sensor Interface | |
| config VIDEO_PXA27x | |
| tristate "PXA27x Quick Capture Interface driver" | |
| depends on VIDEO_DEV && PXA27x && SOC_CAMERA | |
| select VIDEOBUF_DMA_SG | |
| ---help--- | |
| This is a v4l2 driver for the PXA27x Quick Capture Interface | |
| config VIDEO_SH_MOBILE_CSI2 | |
| tristate "SuperH Mobile MIPI CSI-2 Interface driver" | |
| depends on VIDEO_DEV && SOC_CAMERA && HAVE_CLK | |
| ---help--- | |
| This is a v4l2 driver for the SuperH MIPI CSI-2 Interface | |
| config VIDEO_SH_MOBILE_CEU | |
| tristate "SuperH Mobile CEU Interface driver" | |
| depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA && HAVE_CLK | |
| select VIDEOBUF_DMA_CONTIG | |
| ---help--- | |
| This is a v4l2 driver for the SuperH Mobile CEU Interface | |
| config VIDEO_OMAP1 | |
| tristate "OMAP1 Camera Interface driver" | |
| depends on VIDEO_DEV && ARCH_OMAP1 && SOC_CAMERA | |
| select VIDEOBUF_DMA_CONTIG | |
| select VIDEOBUF_DMA_SG | |
| ---help--- | |
| This is a v4l2 driver for the TI OMAP1 camera interface | |
| config VIDEO_OMAP2 | |
| tristate "OMAP2 Camera Capture Interface driver" | |
| depends on VIDEO_DEV && ARCH_OMAP2 | |
| select VIDEOBUF_DMA_SG | |
| ---help--- | |
| This is a v4l2 driver for the TI OMAP2 camera capture interface | |
| config VIDEO_MX2_HOSTSUPPORT | |
| bool | |
| config VIDEO_MX2 | |
| tristate "i.MX27/i.MX25 Camera Sensor Interface driver" | |
| depends on VIDEO_DEV && SOC_CAMERA && (MACH_MX27 || ARCH_MX25) | |
| select VIDEOBUF_DMA_CONTIG | |
| select VIDEO_MX2_HOSTSUPPORT | |
| ---help--- | |
| This is a v4l2 driver for the i.MX27 and the i.MX25 Camera Sensor | |
| Interface | |
| # | |
| # USB Multimedia device configuration | |
| # | |
| menuconfig V4L_USB_DRIVERS | |
| bool "V4L USB devices" | |
| depends on USB | |
| default y | |
| if V4L_USB_DRIVERS && USB | |
| source "drivers/media/video/uvc/Kconfig" | |
| source "drivers/media/video/gspca/Kconfig" | |
| source "drivers/media/video/pvrusb2/Kconfig" | |
| source "drivers/media/video/hdpvr/Kconfig" | |
| source "drivers/media/video/em28xx/Kconfig" | |
| source "drivers/media/video/tlg2300/Kconfig" | |
| source "drivers/media/video/cx231xx/Kconfig" | |
| source "drivers/media/video/usbvision/Kconfig" | |
| source "drivers/media/video/et61x251/Kconfig" | |
| source "drivers/media/video/sn9c102/Kconfig" | |
| source "drivers/media/video/pwc/Kconfig" | |
| config USB_ZR364XX | |
| tristate "USB ZR364XX Camera support" | |
| depends on VIDEO_V4L2 | |
| select VIDEOBUF_GEN | |
| select VIDEOBUF_VMALLOC | |
| ---help--- | |
| Say Y here if you want to connect this type of camera to your | |
| computer's USB port. | |
| See <file:Documentation/video4linux/zr364xx.txt> for more info | |
| and list of supported cameras. | |
| To compile this driver as a module, choose M here: the | |
| module will be called zr364xx. | |
| config USB_STKWEBCAM | |
| tristate "USB Syntek DC1125 Camera support" | |
| depends on VIDEO_V4L2 && EXPERIMENTAL | |
| ---help--- | |
| Say Y here if you want to use this type of camera. | |
| Supported devices are typically found in some Asus laptops, | |
| with USB id 174f:a311 and 05e1:0501. Other Syntek cameras | |
| may be supported by the stk11xx driver, from which this is | |
| derived, see <http://sourceforge.net/projects/syntekdriver/> | |
| To compile this driver as a module, choose M here: the | |
| module will be called stkwebcam. | |
| config USB_S2255 | |
| tristate "USB Sensoray 2255 video capture device" | |
| depends on VIDEO_V4L2 | |
| select VIDEOBUF_VMALLOC | |
| default n | |
| help | |
| Say Y here if you want support for the Sensoray 2255 USB device. | |
| This driver can be compiled as a module, called s2255drv. | |
| endif # V4L_USB_DRIVERS | |
| endif # VIDEO_CAPTURE_DRIVERS | |
| menuconfig V4L_MEM2MEM_DRIVERS | |
| bool "Memory-to-memory multimedia devices" | |
| depends on VIDEO_V4L2 | |
| default n | |
| ---help--- | |
| Say Y here to enable selecting drivers for V4L devices that | |
| use system memory for both source and destination buffers, as opposed | |
| to capture and output drivers, which use memory buffers for just | |
| one of those. | |
| if V4L_MEM2MEM_DRIVERS | |
| config VIDEO_MEM2MEM_TESTDEV | |
| tristate "Virtual test device for mem2mem framework" | |
| depends on VIDEO_DEV && VIDEO_V4L2 | |
| select VIDEOBUF_VMALLOC | |
| select V4L2_MEM2MEM_DEV | |
| default n | |
| ---help--- | |
| This is a virtual test device for the memory-to-memory driver | |
| framework. | |
| config VIDEO_SAMSUNG_S5P_FIMC | |
| tristate "Samsung S5P FIMC (video postprocessor) driver" | |
| depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P | |
| select VIDEOBUF_DMA_CONTIG | |
| select V4L2_MEM2MEM_DEV | |
| help | |
| This is a v4l2 driver for the S5P camera interface | |
| (video postprocessor) | |
| endif # V4L_MEM2MEM_DRIVERS |