| # | |
| # X86 Platform Specific Drivers | |
| # | |
| menuconfig X86_PLATFORM_DEVICES | |
| bool "X86 Platform Specific Device Drivers" | |
| default y | |
| depends on X86 | |
| ---help--- | |
| Say Y here to get to see options for device drivers for various | |
| x86 platforms, including vendor-specific laptop extension drivers. | |
| This option alone does not add any kernel code. | |
| If you say N, all options in this submenu will be skipped and disabled. | |
| if X86_PLATFORM_DEVICES | |
| config ACER_WMI | |
| tristate "Acer WMI Laptop Extras" | |
| depends on ACPI | |
| select LEDS_CLASS | |
| select NEW_LEDS | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| depends on SERIO_I8042 | |
| depends on INPUT | |
| depends on RFKILL || RFKILL = n | |
| depends on ACPI_WMI | |
| select INPUT_SPARSEKMAP | |
| ---help--- | |
| This is a driver for newer Acer (and Wistron) laptops. It adds | |
| wireless radio and bluetooth control, and on some laptops, | |
| exposes the mail LED and LCD backlight. | |
| For more information about this driver see | |
| <file:Documentation/laptops/acer-wmi.txt> | |
| If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M | |
| here. | |
| config ACERHDF | |
| tristate "Acer Aspire One temperature and fan driver" | |
| depends on THERMAL && THERMAL_HWMON && ACPI | |
| ---help--- | |
| This is a driver for Acer Aspire One netbooks. It allows to access | |
| the temperature sensor and to control the fan. | |
| After loading this driver the BIOS is still in control of the fan. | |
| To let the kernel handle the fan, do: | |
| echo -n enabled > /sys/class/thermal/thermal_zone0/mode | |
| For more information about this driver see | |
| <http://piie.net/files/acerhdf_README.txt> | |
| If you have an Acer Aspire One netbook, say Y or M | |
| here. | |
| config ASUS_LAPTOP | |
| tristate "Asus Laptop Extras" | |
| depends on ACPI | |
| depends on !ACPI_ASUS | |
| select LEDS_CLASS | |
| select NEW_LEDS | |
| select BACKLIGHT_CLASS_DEVICE | |
| depends on INPUT | |
| depends on RFKILL || RFKILL = n | |
| select INPUT_SPARSEKMAP | |
| ---help--- | |
| This is the new Linux driver for Asus laptops. It may also support some | |
| MEDION, JVC or VICTOR laptops. It makes all the extra buttons generate | |
| standard ACPI events and input events. It also adds | |
| support for video output switching, LCD backlight control, Bluetooth and | |
| Wlan control, and most importantly, allows you to blink those fancy LEDs. | |
| For more information and a userspace daemon for handling the extra | |
| buttons see <http://acpi4asus.sf.net>. | |
| If you have an ACPI-compatible ASUS laptop, say Y or M here. | |
| config DELL_LAPTOP | |
| tristate "Dell Laptop Extras (EXPERIMENTAL)" | |
| depends on X86 | |
| depends on DCDBAS | |
| depends on EXPERIMENTAL | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| depends on RFKILL || RFKILL = n | |
| depends on POWER_SUPPLY | |
| depends on SERIO_I8042 | |
| default n | |
| ---help--- | |
| This driver adds support for rfkill and backlight control to Dell | |
| laptops. | |
| config DELL_WMI | |
| tristate "Dell WMI extras" | |
| depends on ACPI_WMI | |
| depends on INPUT | |
| select INPUT_SPARSEKMAP | |
| ---help--- | |
| Say Y here if you want to support WMI-based hotkeys on Dell laptops. | |
| To compile this driver as a module, choose M here: the module will | |
| be called dell-wmi. | |
| config FUJITSU_LAPTOP | |
| tristate "Fujitsu Laptop Extras" | |
| depends on ACPI | |
| depends on INPUT | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| depends on LEDS_CLASS || LEDS_CLASS=n | |
| ---help--- | |
| This is a driver for laptops built by Fujitsu: | |
| * P2xxx/P5xxx/S6xxx/S7xxx series Lifebooks | |
| * Possibly other Fujitsu laptop models | |
| * Tested with S6410 and S7020 | |
| It adds support for LCD brightness control and some hotkeys. | |
| If you have a Fujitsu laptop, say Y or M here. | |
| config FUJITSU_LAPTOP_DEBUG | |
| bool "Verbose debug mode for Fujitsu Laptop Extras" | |
| depends on FUJITSU_LAPTOP | |
| default n | |
| ---help--- | |
| Enables extra debug output from the fujitsu extras driver, at the | |
| expense of a slight increase in driver size. | |
| If you are not sure, say N here. | |
| config TC1100_WMI | |
| tristate "HP Compaq TC1100 Tablet WMI Extras (EXPERIMENTAL)" | |
| depends on !X86_64 | |
| depends on EXPERIMENTAL | |
| depends on ACPI | |
| depends on ACPI_WMI | |
| ---help--- | |
| This is a driver for the WMI extensions (wireless and bluetooth power | |
| control) of the HP Compaq TC1100 tablet. | |
| config HP_WMI | |
| tristate "HP WMI extras" | |
| depends on ACPI_WMI | |
| depends on INPUT | |
| depends on RFKILL || RFKILL = n | |
| select INPUT_SPARSEKMAP | |
| help | |
| Say Y here if you want to support WMI-based hotkeys on HP laptops and | |
| to read data from WMI such as docking or ambient light sensor state. | |
| To compile this driver as a module, choose M here: the module will | |
| be called hp-wmi. | |
| config MSI_LAPTOP | |
| tristate "MSI Laptop Extras" | |
| depends on ACPI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| depends on RFKILL | |
| depends on SERIO_I8042 | |
| ---help--- | |
| This is a driver for laptops built by MSI (MICRO-STAR | |
| INTERNATIONAL): | |
| MSI MegaBook S270 (MS-1013) | |
| Cytron/TCM/Medion/Tchibo MD96100/SAM2000 | |
| It adds support for Bluetooth, WLAN and LCD brightness control. | |
| More information about this driver is available at | |
| <http://0pointer.de/lennart/tchibo.html>. | |
| If you have an MSI S270 laptop, say Y or M here. | |
| config PANASONIC_LAPTOP | |
| tristate "Panasonic Laptop Extras" | |
| depends on INPUT && ACPI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| select INPUT_SPARSEKMAP | |
| ---help--- | |
| This driver adds support for access to backlight control and hotkeys | |
| on Panasonic Let's Note laptops. | |
| If you have a Panasonic Let's note laptop (such as the R1(N variant), | |
| R2, R3, R5, T2, W2 and Y2 series), say Y. | |
| config COMPAL_LAPTOP | |
| tristate "Compal Laptop Extras" | |
| depends on ACPI | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| depends on RFKILL | |
| depends on HWMON | |
| depends on POWER_SUPPLY | |
| ---help--- | |
| This is a driver for laptops built by Compal: | |
| Compal FL90/IFL90 | |
| Compal FL91/IFL91 | |
| Compal FL92/JFL92 | |
| Compal FT00/IFT00 | |
| It adds support for Bluetooth, WLAN and LCD brightness control. | |
| If you have an Compal FL9x/IFL9x/FT00 laptop, say Y or M here. | |
| config SONY_LAPTOP | |
| tristate "Sony Laptop Extras" | |
| depends on ACPI | |
| select BACKLIGHT_CLASS_DEVICE | |
| depends on INPUT | |
| depends on RFKILL | |
| ---help--- | |
| This mini-driver drives the SNC and SPIC devices present in the ACPI | |
| BIOS of the Sony Vaio laptops. | |
| It gives access to some extra laptop functionalities like Bluetooth, | |
| screen brightness control, Fn keys and allows powering on/off some | |
| devices. | |
| Read <file:Documentation/laptops/sony-laptop.txt> for more information. | |
| config SONYPI_COMPAT | |
| bool "Sonypi compatibility" | |
| depends on SONY_LAPTOP | |
| ---help--- | |
| Build the sonypi driver compatibility code into the sony-laptop driver. | |
| config IDEAPAD_LAPTOP | |
| tristate "Lenovo IdeaPad Laptop Extras" | |
| depends on ACPI | |
| depends on RFKILL && INPUT | |
| select INPUT_SPARSEKMAP | |
| help | |
| This is a driver for the rfkill switches on Lenovo IdeaPad netbooks. | |
| config THINKPAD_ACPI | |
| tristate "ThinkPad ACPI Laptop Extras" | |
| depends on ACPI | |
| depends on INPUT | |
| depends on RFKILL || RFKILL = n | |
| select BACKLIGHT_LCD_SUPPORT | |
| select BACKLIGHT_CLASS_DEVICE | |
| select HWMON | |
| select NVRAM | |
| select NEW_LEDS | |
| select LEDS_CLASS | |
| ---help--- | |
| This is a driver for the IBM and Lenovo ThinkPad laptops. It adds | |
| support for Fn-Fx key combinations, Bluetooth control, video | |
| output switching, ThinkLight control, UltraBay eject and more. | |
| For more information about this driver see | |
| <file:Documentation/laptops/thinkpad-acpi.txt> and | |
| <http://ibm-acpi.sf.net/> . | |
| This driver was formerly known as ibm-acpi. | |
| Extra functionality will be available if the rfkill (CONFIG_RFKILL) | |
| and/or ALSA (CONFIG_SND) subsystems are available in the kernel. | |
| Note that if you want ThinkPad-ACPI to be built-in instead of | |
| modular, ALSA and rfkill will also have to be built-in. | |
| If you have an IBM or Lenovo ThinkPad laptop, say Y or M here. | |
| config THINKPAD_ACPI_ALSA_SUPPORT | |
| bool "Console audio control ALSA interface" | |
| depends on THINKPAD_ACPI | |
| depends on SND | |
| depends on SND = y || THINKPAD_ACPI = SND | |
| default y | |
| ---help--- | |
| Enables monitoring of the built-in console audio output control | |
| (headphone and speakers), which is operated by the mute and (in | |
| some ThinkPad models) volume hotkeys. | |
| If this option is enabled, ThinkPad-ACPI will export an ALSA card | |
| with a single read-only mixer control, which should be used for | |
| on-screen-display feedback purposes by the Desktop Environment. | |
| Optionally, the driver will also allow software control (the | |
| ALSA mixer will be made read-write). Please refer to the driver | |
| documentation for details. | |
| All IBM models have both volume and mute control. Newer Lenovo | |
| models only have mute control (the volume hotkeys are just normal | |
| keys and volume control is done through the main HDA mixer). | |
| config THINKPAD_ACPI_DEBUGFACILITIES | |
| bool "Maintainer debug facilities" | |
| depends on THINKPAD_ACPI | |
| default n | |
| ---help--- | |
| Enables extra stuff in the thinkpad-acpi which is completely useless | |
| for normal use. Read the driver source to find out what it does. | |
| Say N here, unless you were told by a kernel maintainer to do | |
| otherwise. | |
| config THINKPAD_ACPI_DEBUG | |
| bool "Verbose debug mode" | |
| depends on THINKPAD_ACPI | |
| default n | |
| ---help--- | |
| Enables extra debugging information, at the expense of a slightly | |
| increase in driver size. | |
| If you are not sure, say N here. | |
| config THINKPAD_ACPI_UNSAFE_LEDS | |
| bool "Allow control of important LEDs (unsafe)" | |
| depends on THINKPAD_ACPI | |
| default n | |
| ---help--- | |
| Overriding LED state on ThinkPads can mask important | |
| firmware alerts (like critical battery condition), or misled | |
| the user into damaging the hardware (undocking or ejecting | |
| the bay while buses are still active), etc. | |
| LED control on the ThinkPad is write-only (with very few | |
| exceptions on very ancient models), which makes it | |
| impossible to know beforehand if important information will | |
| be lost when one changes LED state. | |
| Users that know what they are doing can enable this option | |
| and the driver will allow control of every LED, including | |
| the ones on the dock stations. | |
| Never enable this option on a distribution kernel. | |
| Say N here, unless you are building a kernel for your own | |
| use, and need to control the important firmware LEDs. | |
| config THINKPAD_ACPI_VIDEO | |
| bool "Video output control support" | |
| depends on THINKPAD_ACPI | |
| default y | |
| ---help--- | |
| Allows the thinkpad_acpi driver to provide an interface to control | |
| the various video output ports. | |
| This feature often won't work well, depending on ThinkPad model, | |
| display state, video output devices in use, whether there is a X | |
| server running, phase of the moon, and the current mood of | |
| Schroedinger's cat. If you can use X.org's RandR to control | |
| your ThinkPad's video output ports instead of this feature, | |
| don't think twice: do it and say N here to save memory and avoid | |
| bad interactions with X.org. | |
| NOTE: access to this feature is limited to processes with the | |
| CAP_SYS_ADMIN capability, to avoid local DoS issues in platforms | |
| where it interacts badly with X.org. | |
| If you are not sure, say Y here but do try to check if you could | |
| be using X.org RandR instead. | |
| config THINKPAD_ACPI_HOTKEY_POLL | |
| bool "Support NVRAM polling for hot keys" | |
| depends on THINKPAD_ACPI | |
| default y | |
| ---help--- | |
| Some thinkpad models benefit from NVRAM polling to detect a few of | |
| the hot key press events. If you know your ThinkPad model does not | |
| need to do NVRAM polling to support any of the hot keys you use, | |
| unselecting this option will save about 1kB of memory. | |
| ThinkPads T40 and newer, R52 and newer, and X31 and newer are | |
| unlikely to need NVRAM polling in their latest BIOS versions. | |
| NVRAM polling can detect at most the following keys: ThinkPad/Access | |
| IBM, Zoom, Switch Display (fn+F7), ThinkLight, Volume up/down/mute, | |
| Brightness up/down, Display Expand (fn+F8), Hibernate (fn+F12). | |
| If you are not sure, say Y here. The driver enables polling only if | |
| it is strictly necessary to do so. | |
| config SENSORS_HDAPS | |
| tristate "Thinkpad Hard Drive Active Protection System (hdaps)" | |
| depends on INPUT && X86 | |
| select INPUT_POLLDEV | |
| default n | |
| help | |
| This driver provides support for the IBM Hard Drive Active Protection | |
| System (hdaps), which provides an accelerometer and other misc. data. | |
| ThinkPads starting with the R50, T41, and X40 are supported. The | |
| accelerometer data is readable via sysfs. | |
| This driver also provides an absolute input class device, allowing | |
| the laptop to act as a pinball machine-esque joystick. | |
| If your ThinkPad is not recognized by the driver, please update to latest | |
| BIOS. This is especially the case for some R52 ThinkPads. | |
| Say Y here if you have an applicable laptop and want to experience | |
| the awesome power of hdaps. | |
| config INTEL_MENLOW | |
| tristate "Thermal Management driver for Intel menlow platform" | |
| depends on ACPI_THERMAL | |
| select THERMAL | |
| ---help--- | |
| ACPI thermal management enhancement driver on | |
| Intel Menlow platform. | |
| If unsure, say N. | |
| config EEEPC_LAPTOP | |
| tristate "Eee PC Hotkey Driver (EXPERIMENTAL)" | |
| depends on ACPI | |
| depends on INPUT | |
| depends on EXPERIMENTAL | |
| depends on RFKILL || RFKILL = n | |
| depends on HOTPLUG_PCI | |
| select BACKLIGHT_CLASS_DEVICE | |
| select HWMON | |
| select LEDS_CLASS | |
| select NEW_LEDS | |
| select INPUT_SPARSEKMAP | |
| ---help--- | |
| This driver supports the Fn-Fx keys on Eee PC laptops. | |
| It also gives access to some extra laptop functionalities like | |
| Bluetooth, backlight and allows powering on/off some other | |
| devices. | |
| If you have an Eee PC laptop, say Y or M here. | |
| config EEEPC_WMI | |
| tristate "Eee PC WMI Hotkey Driver (EXPERIMENTAL)" | |
| depends on ACPI_WMI | |
| depends on INPUT | |
| depends on EXPERIMENTAL | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| depends on RFKILL || RFKILL = n | |
| select INPUT_SPARSEKMAP | |
| select LEDS_CLASS | |
| select NEW_LEDS | |
| ---help--- | |
| Say Y here if you want to support WMI-based hotkeys on Eee PC laptops. | |
| To compile this driver as a module, choose M here: the module will | |
| be called eeepc-wmi. | |
| config ACPI_WMI | |
| tristate "WMI" | |
| depends on ACPI | |
| help | |
| This driver adds support for the ACPI-WMI (Windows Management | |
| Instrumentation) mapper device (PNP0C14) found on some systems. | |
| ACPI-WMI is a proprietary extension to ACPI to expose parts of the | |
| ACPI firmware to userspace - this is done through various vendor | |
| defined methods and data blocks in a PNP0C14 device, which are then | |
| made available for userspace to call. | |
| The implementation of this in Linux currently only exposes this to | |
| other kernel space drivers. | |
| This driver is a required dependency to build the firmware specific | |
| drivers needed on many machines, including Acer and HP laptops. | |
| It is safe to enable this driver even if your DSDT doesn't define | |
| any ACPI-WMI devices. | |
| config MSI_WMI | |
| tristate "MSI WMI extras" | |
| depends on ACPI_WMI | |
| depends on INPUT | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| select INPUT_SPARSEKMAP | |
| help | |
| Say Y here if you want to support WMI-based hotkeys on MSI laptops. | |
| To compile this driver as a module, choose M here: the module will | |
| be called msi-wmi. | |
| config ACPI_ASUS | |
| tristate "ASUS/Medion Laptop Extras (DEPRECATED)" | |
| depends on ACPI | |
| select BACKLIGHT_CLASS_DEVICE | |
| ---help--- | |
| This driver provides support for extra features of ACPI-compatible | |
| ASUS laptops. As some of Medion laptops are made by ASUS, it may also | |
| support some Medion laptops (such as 9675 for example). It makes all | |
| the extra buttons generate standard ACPI events that go through | |
| /proc/acpi/events, and (on some models) adds support for changing the | |
| display brightness and output, switching the LCD backlight on and off, | |
| and most importantly, allows you to blink those fancy LEDs intended | |
| for reporting mail and wireless status. | |
| Note: display switching code is currently considered EXPERIMENTAL, | |
| toying with these values may even lock your machine. | |
| All settings are changed via /proc/acpi/asus directory entries. Owner | |
| and group for these entries can be set with asus_uid and asus_gid | |
| parameters. | |
| More information and a userspace daemon for handling the extra buttons | |
| at <http://acpi4asus.sf.net>. | |
| If you have an ACPI-compatible ASUS laptop, say Y or M here. This | |
| driver is still under development, so if your laptop is unsupported or | |
| something works not quite as expected, please use the mailing list | |
| available on the above page (acpi4asus-user@lists.sourceforge.net). | |
| NOTE: This driver is deprecated and will probably be removed soon, | |
| use asus-laptop instead. | |
| config TOPSTAR_LAPTOP | |
| tristate "Topstar Laptop Extras" | |
| depends on ACPI | |
| depends on INPUT | |
| select INPUT_SPARSEKMAP | |
| ---help--- | |
| This driver adds support for hotkeys found on Topstar laptops. | |
| If you have a Topstar laptop, say Y or M here. | |
| config ACPI_TOSHIBA | |
| tristate "Toshiba Laptop Extras" | |
| depends on ACPI | |
| select LEDS_CLASS | |
| select NEW_LEDS | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| depends on INPUT | |
| depends on RFKILL || RFKILL = n | |
| select INPUT_POLLDEV | |
| select INPUT_SPARSEKMAP | |
| ---help--- | |
| This driver adds support for access to certain system settings | |
| on "legacy free" Toshiba laptops. These laptops can be recognized by | |
| their lack of a BIOS setup menu and APM support. | |
| On these machines, all system configuration is handled through the | |
| ACPI. This driver is required for access to controls not covered | |
| by the general ACPI drivers, such as LCD brightness, video output, | |
| etc. | |
| This driver differs from the non-ACPI Toshiba laptop driver (located | |
| under "Processor type and features") in several aspects. | |
| Configuration is accessed by reading and writing text files in the | |
| /proc tree instead of by program interface to /dev. Furthermore, no | |
| power management functions are exposed, as those are handled by the | |
| general ACPI drivers. | |
| More information about this driver is available at | |
| <http://memebeam.org/toys/ToshibaAcpiDriver>. | |
| If you have a legacy free Toshiba laptop (such as the Libretto L1 | |
| series), say Y. | |
| config TOSHIBA_BT_RFKILL | |
| tristate "Toshiba Bluetooth RFKill switch support" | |
| depends on ACPI | |
| ---help--- | |
| This driver adds support for Bluetooth events for the RFKill | |
| switch on modern Toshiba laptops with full ACPI support and | |
| an RFKill switch. | |
| This driver handles RFKill events for the TOS6205 Bluetooth, | |
| and re-enables it when the switch is set back to the 'on' | |
| position. | |
| If you have a modern Toshiba laptop with a Bluetooth and an | |
| RFKill switch (such as the Portege R500), say Y. | |
| config ACPI_CMPC | |
| tristate "CMPC Laptop Extras" | |
| depends on X86 && ACPI | |
| depends on RFKILL || RFKILL=n | |
| select INPUT | |
| select BACKLIGHT_CLASS_DEVICE | |
| default n | |
| help | |
| Support for Intel Classmate PC ACPI devices, including some | |
| keys as input device, backlight device, tablet and accelerometer | |
| devices. | |
| config INTEL_SCU_IPC | |
| bool "Intel SCU IPC Support" | |
| depends on X86_MRST | |
| default y | |
| ---help--- | |
| IPC is used to bridge the communications between kernel and SCU on | |
| some embedded Intel x86 platforms. This is not needed for PC-type | |
| machines. | |
| config INTEL_SCU_IPC_UTIL | |
| tristate "Intel SCU IPC utility driver" | |
| depends on INTEL_SCU_IPC | |
| default y | |
| ---help--- | |
| The IPC Util driver provides an interface with the SCU enabling | |
| low level access for debug work and updating the firmware. Say | |
| N unless you will be doing this on an Intel MID platform. | |
| config GPIO_INTEL_PMIC | |
| bool "Intel PMIC GPIO support" | |
| depends on INTEL_SCU_IPC && GPIOLIB | |
| ---help--- | |
| Say Y here to support GPIO via the SCU IPC interface | |
| on Intel MID platforms. | |
| config RAR_REGISTER | |
| bool "Restricted Access Region Register Driver" | |
| depends on PCI && X86_MRST | |
| default n | |
| ---help--- | |
| This driver allows other kernel drivers access to the | |
| contents of the restricted access region control registers. | |
| The restricted access region control registers | |
| (rar_registers) are used to pass address and | |
| locking information on restricted access regions | |
| to other drivers that use restricted access regions. | |
| The restricted access regions are regions of memory | |
| on the Intel MID Platform that are not accessible to | |
| the x86 processor, but are accessible to dedicated | |
| processors on board peripheral devices. | |
| The purpose of the restricted access regions is to | |
| protect sensitive data from compromise by unauthorized | |
| programs running on the x86 processor. | |
| config INTEL_IPS | |
| tristate "Intel Intelligent Power Sharing" | |
| depends on ACPI | |
| ---help--- | |
| Intel Calpella platforms support dynamic power sharing between the | |
| CPU and GPU, maximizing performance in a given TDP. This driver, | |
| along with the CPU frequency and i915 drivers, provides that | |
| functionality. If in doubt, say Y here; it will only load on | |
| supported platforms. | |
| config IBM_RTL | |
| tristate "Device driver to enable PRTL support" | |
| depends on X86 && PCI | |
| ---help--- | |
| Enable support for IBM Premium Real Time Mode (PRTM). | |
| This module will allow you the enter and exit PRTM in the BIOS via | |
| sysfs on platforms that support this feature. System in PRTM will | |
| not receive CPU-generated SMIs for recoverable errors. Use of this | |
| feature without proper support may void your hardware warranty. | |
| If the proper BIOS support is found the driver will load and create | |
| /sys/devices/system/ibm_rtl/. The "state" variable will indicate | |
| whether or not the BIOS is in PRTM. | |
| state = 0 (BIOS SMIs on) | |
| state = 1 (BIOS SMIs off) | |
| config XO1_RFKILL | |
| tristate "OLPC XO-1 software RF kill switch" | |
| depends on OLPC | |
| depends on RFKILL | |
| ---help--- | |
| Support for enabling/disabling the WLAN interface on the OLPC XO-1 | |
| laptop. | |
| endif # X86_PLATFORM_DEVICES |