blob: 0fd87a3796c1e692efc3ad9781d6bd1d9a6c58cc [file] [log] [blame] [edit]
/*****************************************************************************
* auth.c - Network Authentication and Phase Control program file.
*
* Copyright (c) 2003 by Marc Boucher, Services Informatiques (MBSI) inc.
* Copyright (c) 1997 by Global Election Systems Inc. All rights reserved.
*
* The authors hereby grant permission to use, copy, modify, distribute,
* and license this software and its documentation for any purpose, provided
* that existing copyright notices are retained in all copies and that this
* notice and the following disclaimer are included verbatim in any
* distributions. No written agreement, license, or royalty fee is required
* for any of the authorized uses.
*
* THIS SOFTWARE IS PROVIDED BY THE CONTRIBUTORS *AS IS* AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
* REVISION HISTORY
*
* 03-01-01 Marc Boucher <marc@mbsi.ca>
* Ported to lwIP.
* 97-12-08 Guy Lancaster <lancasterg@acm.org>, Global Election Systems Inc.
* Ported from public pppd code.
*****************************************************************************/
/*
* auth.c - PPP authentication and phase control.
*
* Copyright (c) 1993 The Australian National University.
* All rights reserved.
*
* Redistribution and use in source and binary forms are permitted
* provided that the above copyright notice and this paragraph are
* duplicated in all such forms and that any documentation,
* advertising materials, and other materials related to such
* distribution and use acknowledge that the software was developed
* by the Australian National University. The name of the University
* may not be used to endorse or promote products derived from this
* software without specific prior written permission.
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
* WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
*
* Copyright (c) 1989 Carnegie Mellon University.
* All rights reserved.
*
* Redistribution and use in source and binary forms are permitted
* provided that the above copyright notice and this paragraph are
* duplicated in all such forms and that any documentation,
* advertising materials, and other materials related to such
* distribution and use acknowledge that the software was developed
* by Carnegie Mellon University. The name of the
* University may not be used to endorse or promote products derived
* from this software without specific prior written permission.
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
* WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
*/
#include "lwip/opt.h"
#if PPP_SUPPORT /* don't build if not configured for use in lwipopts.h */
#include "ppp_impl.h"
#include "pppdebug.h"
#include "fsm.h"
#include "lcp.h"
#include "pap.h"
#include "chap.h"
#include "auth.h"
#include "ipcp.h"
#if CBCP_SUPPORT
#include "cbcp.h"
#endif /* CBCP_SUPPORT */
#include "lwip/inet.h"
#include <string.h>
#if 0 /* UNUSED */
/* Bits in scan_authfile return value */
#define NONWILD_SERVER 1
#define NONWILD_CLIENT 2
#define ISWILD(word) (word[0] == '*' && word[1] == 0)
#endif /* UNUSED */
#if PAP_SUPPORT || CHAP_SUPPORT
/* The name by which the peer authenticated itself to us. */
static char peer_authname[MAXNAMELEN];
#endif /* PAP_SUPPORT || CHAP_SUPPORT */
/* Records which authentication operations haven't completed yet. */
static int auth_pending[NUM_PPP];
/* Set if we have successfully called plogin() */
static int logged_in;
/* Set if we have run the /etc/ppp/auth-up script. */
static int did_authup; /* @todo, we don't need this in lwip*/
/* List of addresses which the peer may use. */
static struct wordlist *addresses[NUM_PPP];
#if 0 /* UNUSED */
/* Wordlist giving addresses which the peer may use
without authenticating itself. */
static struct wordlist *noauth_addrs;
/* Extra options to apply, from the secrets file entry for the peer. */
static struct wordlist *extra_options;
#endif /* UNUSED */
/* Number of network protocols which we have opened. */
static int num_np_open;
/* Number of network protocols which have come up. */
static int num_np_up;
#if PAP_SUPPORT || CHAP_SUPPORT
/* Set if we got the contents of passwd[] from the pap-secrets file. */
static int passwd_from_file;
#endif /* PAP_SUPPORT || CHAP_SUPPORT */
#if 0 /* UNUSED */
/* Set if we require authentication only because we have a default route. */
static bool default_auth;
/* Hook to enable a plugin to control the idle time limit */
int (*idle_time_hook) __P((struct ppp_idle *)) = NULL;
/* Hook for a plugin to say whether we can possibly authenticate any peer */
int (*pap_check_hook) __P((void)) = NULL;
/* Hook for a plugin to check the PAP user and password */
int (*pap_auth_hook) __P((char *user, char *passwd, char **msgp,
struct wordlist **paddrs,
struct wordlist **popts)) = NULL;
/* Hook for a plugin to know about the PAP user logout */
void (*pap_logout_hook) __P((void)) = NULL;
/* Hook for a plugin to get the PAP password for authenticating us */
int (*pap_passwd_hook) __P((char *user, char *passwd)) = NULL;
/*
* This is used to ensure that we don't start an auth-up/down
* script while one is already running.
*/
enum script_state {
s_down,
s_up
};
static enum script_state auth_state = s_down;
static enum script_state auth_script_state = s_down;
static pid_t auth_script_pid = 0;
/*
* Option variables.
* lwip: some of these are present in the ppp_settings structure
*/
bool uselogin = 0; /* Use /etc/passwd for checking PAP */
bool cryptpap = 0; /* Passwords in pap-secrets are encrypted */
bool refuse_pap = 0; /* Don't wanna auth. ourselves with PAP */
bool refuse_chap = 0; /* Don't wanna auth. ourselves with CHAP */
bool usehostname = 0; /* Use hostname for our_name */
bool auth_required = 0; /* Always require authentication from peer */
bool allow_any_ip = 0; /* Allow peer to use any IP address */
bool explicit_remote = 0; /* User specified explicit remote name */
char remote_name[MAXNAMELEN]; /* Peer's name for authentication */
#endif /* UNUSED */
/* Bits in auth_pending[] */
#define PAP_WITHPEER 1
#define PAP_PEER 2
#define CHAP_WITHPEER 4
#define CHAP_PEER 8
/* @todo, move this somewhere */
/* Used for storing a sequence of words. Usually malloced. */
struct wordlist {
struct wordlist *next;
char word[1];
};
extern char *crypt (const char *, const char *);
/* Prototypes for procedures local to this file. */
static void network_phase (int);
static void check_idle (void *);
static void connect_time_expired (void *);
#if 0
static int plogin (char *, char *, char **, int *);
#endif
static void plogout (void);
static int null_login (int);
static int get_pap_passwd (int, char *, char *);
static int have_pap_secret (void);
static int have_chap_secret (char *, char *, u32_t);
static int ip_addr_check (u32_t, struct wordlist *);
#if 0 /* PAP_SUPPORT || CHAP_SUPPORT */
static int scan_authfile (FILE *, char *, char *, char *,
struct wordlist **, struct wordlist **,
char *);
static void free_wordlist (struct wordlist *);
static void auth_script (char *);
static void auth_script_done (void *);
static void set_allowed_addrs (int unit, struct wordlist *addrs);
static int some_ip_ok (struct wordlist *);
static int setupapfile (char **);
static int privgroup (char **);
static int set_noauth_addr (char **);
static void check_access (FILE *, char *);
#endif /* 0 */ /* PAP_SUPPORT || CHAP_SUPPORT */
#if 0 /* UNUSED */
/*
* Authentication-related options.
*/
option_t auth_options[] = {
{ "require-pap", o_bool, &lcp_wantoptions[0].neg_upap,
"Require PAP authentication from peer", 1, &auth_required },
{ "+pap", o_bool, &lcp_wantoptions[0].neg_upap,
"Require PAP authentication from peer", 1, &auth_required },
{ "refuse-pap", o_bool, &refuse_pap,
"Don't agree to auth to peer with PAP", 1 },
{ "-pap", o_bool, &refuse_pap,
"Don't allow PAP authentication with peer", 1 },
{ "require-chap", o_bool, &lcp_wantoptions[0].neg_chap,
"Require CHAP authentication from peer", 1, &auth_required },
{ "+chap", o_bool, &lcp_wantoptions[0].neg_chap,
"Require CHAP authentication from peer", 1, &auth_required },
{ "refuse-chap", o_bool, &refuse_chap,
"Don't agree to auth to peer with CHAP", 1 },
{ "-chap", o_bool, &refuse_chap,
"Don't allow CHAP authentication with peer", 1 },
{ "name", o_string, our_name,
"Set local name for authentication",
OPT_PRIV|OPT_STATIC, NULL, MAXNAMELEN },
{ "user", o_string, user,
"Set name for auth with peer", OPT_STATIC, NULL, MAXNAMELEN },
{ "usehostname", o_bool, &usehostname,
"Must use hostname for authentication", 1 },
{ "remotename", o_string, remote_name,
"Set remote name for authentication", OPT_STATIC,
&explicit_remote, MAXNAMELEN },
{ "auth", o_bool, &auth_required,
"Require authentication from peer", 1 },
{ "noauth", o_bool, &auth_required,
"Don't require peer to authenticate", OPT_PRIV, &allow_any_ip },
{ "login", o_bool, &uselogin,
"Use system password database for PAP", 1 },
{ "papcrypt", o_bool, &cryptpap,
"PAP passwords are encrypted", 1 },
{ "+ua", o_special, (void *)setupapfile,
"Get PAP user and password from file" },
{ "password", o_string, passwd,
"Password for authenticating us to the peer", OPT_STATIC,
NULL, MAXSECRETLEN },
{ "privgroup", o_special, (void *)privgroup,
"Allow group members to use privileged options", OPT_PRIV },
{ "allow-ip", o_special, (void *)set_noauth_addr,
"Set IP address(es) which can be used without authentication",
OPT_PRIV },
{ NULL }
};
#endif /* UNUSED */
#if 0 /* UNUSED */
/*
* setupapfile - specifies UPAP info for authenticating with peer.
*/
static int
setupapfile(char **argv)
{
FILE * ufile;
int l;
lcp_allowoptions[0].neg_upap = 1;
/* open user info file */
seteuid(getuid());
ufile = fopen(*argv, "r");
seteuid(0);
if (ufile == NULL) {
option_error("unable to open user login data file %s", *argv);
return 0;
}
check_access(ufile, *argv);
/* get username */
if (fgets(user, MAXNAMELEN - 1, ufile) == NULL
|| fgets(passwd, MAXSECRETLEN - 1, ufile) == NULL){
option_error("unable to read user login data file %s", *argv);
return 0;
}
fclose(ufile);
/* get rid of newlines */
l = strlen(user);
if (l > 0 && user[l-1] == '\n')
user[l-1] = 0;
l = strlen(passwd);
if (l > 0 && passwd[l-1] == '\n')
passwd[l-1] = 0;
return (1);
}
#endif /* UNUSED */
#if 0 /* UNUSED */
/*
* privgroup - allow members of the group to have privileged access.
*/
static int
privgroup(char **argv)
{
struct group *g;
int i;
g = getgrnam(*argv);
if (g == 0) {
option_error("group %s is unknown", *argv);
return 0;
}
for (i = 0; i < ngroups; ++i) {
if (groups[i] == g->gr_gid) {
privileged = 1;
break;
}
}
return 1;
}
#endif
#if 0 /* UNUSED */
/*
* set_noauth_addr - set address(es) that can be used without authentication.
* Equivalent to specifying an entry like `"" * "" addr' in pap-secrets.
*/
static int
set_noauth_addr(char **argv)
{
char *addr = *argv;
int l = strlen(addr);
struct wordlist *wp;
wp = (struct wordlist *) malloc(sizeof(struct wordlist) + l + 1);
if (wp == NULL)
novm("allow-ip argument");
wp->word = (char *) (wp + 1);
wp->next = noauth_addrs;
BCOPY(addr, wp->word, l);
noauth_addrs = wp;
return 1;
}
#endif /* UNUSED */
/*
* An Open on LCP has requested a change from Dead to Establish phase.
* Do what's necessary to bring the physical layer up.
*/
void
link_required(int unit)
{
LWIP_UNUSED_ARG(unit);
AUTHDEBUG(LOG_INFO, ("link_required: %d\n", unit));
}
/*
* LCP has terminated the link; go to the Dead phase and take the
* physical layer down.
*/
void
link_terminated(int unit)
{
AUTHDEBUG(LOG_INFO, ("link_terminated: %d\n", unit));
if (lcp_phase[unit] == PHASE_DEAD) {
return;
}
if (logged_in) {
plogout();
}
lcp_phase[unit] = PHASE_DEAD;
AUTHDEBUG(LOG_NOTICE, ("Connection terminated.\n"));
pppLinkTerminated(unit);
}
/*
* LCP has gone down; it will either die or try to re-establish.
*/
void
link_down(int unit)
{
int i;
struct protent *protp;
AUTHDEBUG(LOG_INFO, ("link_down: %d\n", unit));
if (did_authup) {
/* XXX Do link down processing. */
did_authup = 0;
}
for (i = 0; (protp = ppp_protocols[i]) != NULL; ++i) {
if (!protp->enabled_flag) {
continue;
}
if (protp->protocol != PPP_LCP && protp->lowerdown != NULL) {
(*protp->lowerdown)(unit);
}
if (protp->protocol < 0xC000 && protp->close != NULL) {
(*protp->close)(unit, "LCP down");
}
}
num_np_open = 0; /* number of network protocols we have opened */
num_np_up = 0; /* Number of network protocols which have come up */
if (lcp_phase[unit] != PHASE_DEAD) {
lcp_phase[unit] = PHASE_TERMINATE;
}
pppLinkDown(unit);
}
/*
* The link is established.
* Proceed to the Dead, Authenticate or Network phase as appropriate.
*/
void
link_established(int unit)
{
int auth;
int i;
struct protent *protp;
lcp_options *wo = &lcp_wantoptions[unit];
lcp_options *go = &lcp_gotoptions[unit];
#if PAP_SUPPORT || CHAP_SUPPORT
lcp_options *ho = &lcp_hisoptions[unit];
#endif /* PAP_SUPPORT || CHAP_SUPPORT */
AUTHDEBUG(LOG_INFO, ("link_established: unit %d; Lowering up all protocols...\n", unit));
/*
* Tell higher-level protocols that LCP is up.
*/
for (i = 0; (protp = ppp_protocols[i]) != NULL; ++i) {
if (protp->protocol != PPP_LCP && protp->enabled_flag && protp->lowerup != NULL) {
(*protp->lowerup)(unit);
}
}
if (ppp_settings.auth_required && !(go->neg_chap || go->neg_upap)) {
/*
* We wanted the peer to authenticate itself, and it refused:
* treat it as though it authenticated with PAP using a username
* of "" and a password of "". If that's not OK, boot it out.
*/
if (!wo->neg_upap || !null_login(unit)) {
AUTHDEBUG(LOG_WARNING, ("peer refused to authenticate\n"));
lcp_close(unit, "peer refused to authenticate");
return;
}
}
lcp_phase[unit] = PHASE_AUTHENTICATE;
auth = 0;
#if CHAP_SUPPORT
if (go->neg_chap) {
ChapAuthPeer(unit, ppp_settings.our_name, go->chap_mdtype);
auth |= CHAP_PEER;
}
#endif /* CHAP_SUPPORT */
#if PAP_SUPPORT && CHAP_SUPPORT
else
#endif /* PAP_SUPPORT && CHAP_SUPPORT */
#if PAP_SUPPORT
if (go->neg_upap) {
upap_authpeer(unit);
auth |= PAP_PEER;
}
#endif /* PAP_SUPPORT */
#if CHAP_SUPPORT
if (ho->neg_chap) {
ChapAuthWithPeer(unit, ppp_settings.user, ho->chap_mdtype);
auth |= CHAP_WITHPEER;
}
#endif /* CHAP_SUPPORT */
#if PAP_SUPPORT && CHAP_SUPPORT
else
#endif /* PAP_SUPPORT && CHAP_SUPPORT */
#if PAP_SUPPORT
if (ho->neg_upap) {
if (ppp_settings.passwd[0] == 0) {
passwd_from_file = 1;
if (!get_pap_passwd(unit, ppp_settings.user, ppp_settings.passwd)) {
AUTHDEBUG(LOG_ERR, ("No secret found for PAP login\n"));
}
}
upap_authwithpeer(unit, ppp_settings.user, ppp_settings.passwd);
auth |= PAP_WITHPEER;
}
#endif /* PAP_SUPPORT */
auth_pending[unit] = auth;
if (!auth) {
network_phase(unit);
}
}
/*
* Proceed to the network phase.
*/
static void
network_phase(int unit)
{
int i;
struct protent *protp;
lcp_options *go = &lcp_gotoptions[unit];
/*
* If the peer had to authenticate, run the auth-up script now.
*/
if ((go->neg_chap || go->neg_upap) && !did_authup) {
/* XXX Do setup for peer authentication. */
did_authup = 1;
}
#if CBCP_SUPPORT
/*
* If we negotiated callback, do it now.
*/
if (go->neg_cbcp) {
lcp_phase[unit] = PHASE_CALLBACK;
(*cbcp_protent.open)(unit);
return;
}
#endif /* CBCP_SUPPORT */
lcp_phase[unit] = PHASE_NETWORK;
for (i = 0; (protp = ppp_protocols[i]) != NULL; ++i) {
if (protp->protocol < 0xC000 && protp->enabled_flag && protp->open != NULL) {
(*protp->open)(unit);
if (protp->protocol != PPP_CCP) {
++num_np_open;
}
}
}
if (num_np_open == 0) {
/* nothing to do */
lcp_close(0, "No network protocols running");
}
}
/* @todo: add void start_networks(void) here (pppd 2.3.11) */
/*
* The peer has failed to authenticate himself using `protocol'.
*/
void
auth_peer_fail(int unit, u16_t protocol)
{
LWIP_UNUSED_ARG(protocol);
AUTHDEBUG(LOG_INFO, ("auth_peer_fail: %d proto=%X\n", unit, protocol));
/*
* Authentication failure: take the link down
*/
lcp_close(unit, "Authentication failed");
}
#if PAP_SUPPORT || CHAP_SUPPORT
/*
* The peer has been successfully authenticated using `protocol'.
*/
void
auth_peer_success(int unit, u16_t protocol, char *name, int namelen)
{
int pbit;
AUTHDEBUG(LOG_INFO, ("auth_peer_success: %d proto=%X\n", unit, protocol));
switch (protocol) {
case PPP_CHAP:
pbit = CHAP_PEER;
break;
case PPP_PAP:
pbit = PAP_PEER;
break;
default:
AUTHDEBUG(LOG_WARNING, ("auth_peer_success: unknown protocol %x\n", protocol));
return;
}
/*
* Save the authenticated name of the peer for later.
*/
if (namelen > (int)sizeof(peer_authname) - 1) {
namelen = sizeof(peer_authname) - 1;
}
BCOPY(name, peer_authname, namelen);
peer_authname[namelen] = 0;
/*
* If there is no more authentication still to be done,
* proceed to the network (or callback) phase.
*/
if ((auth_pending[unit] &= ~pbit) == 0) {
network_phase(unit);
}
}
/*
* We have failed to authenticate ourselves to the peer using `protocol'.
*/
void
auth_withpeer_fail(int unit, u16_t protocol)
{
int errCode = PPPERR_AUTHFAIL;
LWIP_UNUSED_ARG(protocol);
AUTHDEBUG(LOG_INFO, ("auth_withpeer_fail: %d proto=%X\n", unit, protocol));
if (passwd_from_file) {
BZERO(ppp_settings.passwd, MAXSECRETLEN);
}
/*
* We've failed to authenticate ourselves to our peer.
* He'll probably take the link down, and there's not much
* we can do except wait for that.
*/
pppIOCtl(unit, PPPCTLS_ERRCODE, &errCode);
lcp_close(unit, "Failed to authenticate ourselves to peer");
}
/*
* We have successfully authenticated ourselves with the peer using `protocol'.
*/
void
auth_withpeer_success(int unit, u16_t protocol)
{
int pbit;
AUTHDEBUG(LOG_INFO, ("auth_withpeer_success: %d proto=%X\n", unit, protocol));
switch (protocol) {
case PPP_CHAP:
pbit = CHAP_WITHPEER;
break;
case PPP_PAP:
if (passwd_from_file) {
BZERO(ppp_settings.passwd, MAXSECRETLEN);
}
pbit = PAP_WITHPEER;
break;
default:
AUTHDEBUG(LOG_WARNING, ("auth_peer_success: unknown protocol %x\n", protocol));
pbit = 0;
}
/*
* If there is no more authentication still being done,
* proceed to the network (or callback) phase.
*/
if ((auth_pending[unit] &= ~pbit) == 0) {
network_phase(unit);
}
}
#endif /* PAP_SUPPORT || CHAP_SUPPORT */
/*
* np_up - a network protocol has come up.
*/
void
np_up(int unit, u16_t proto)
{
LWIP_UNUSED_ARG(unit);
LWIP_UNUSED_ARG(proto);
AUTHDEBUG(LOG_INFO, ("np_up: %d proto=%X\n", unit, proto));
if (num_np_up == 0) {
AUTHDEBUG(LOG_INFO, ("np_up: maxconnect=%d idle_time_limit=%d\n",ppp_settings.maxconnect,ppp_settings.idle_time_limit));
/*
* At this point we consider that the link has come up successfully.
*/
if (ppp_settings.idle_time_limit > 0) {
TIMEOUT(check_idle, NULL, ppp_settings.idle_time_limit);
}
/*
* Set a timeout to close the connection once the maximum
* connect time has expired.
*/
if (ppp_settings.maxconnect > 0) {
TIMEOUT(connect_time_expired, 0, ppp_settings.maxconnect);
}
}
++num_np_up;
}
/*
* np_down - a network protocol has gone down.
*/
void
np_down(int unit, u16_t proto)
{
LWIP_UNUSED_ARG(unit);
LWIP_UNUSED_ARG(proto);
AUTHDEBUG(LOG_INFO, ("np_down: %d proto=%X\n", unit, proto));
if (--num_np_up == 0 && ppp_settings.idle_time_limit > 0) {
UNTIMEOUT(check_idle, NULL);
}
}
/*
* np_finished - a network protocol has finished using the link.
*/
void
np_finished(int unit, u16_t proto)
{
LWIP_UNUSED_ARG(unit);
LWIP_UNUSED_ARG(proto);
AUTHDEBUG(LOG_INFO, ("np_finished: %d proto=%X\n", unit, proto));
if (--num_np_open <= 0) {
/* no further use for the link: shut up shop. */
lcp_close(0, "No network protocols running");
}
}
/*
* check_idle - check whether the link has been idle for long
* enough that we can shut it down.
*/
static void
check_idle(void *arg)
{
struct ppp_idle idle;
u_short itime;
LWIP_UNUSED_ARG(arg);
if (!get_idle_time(0, &idle)) {
return;
}
itime = LWIP_MIN(idle.xmit_idle, idle.recv_idle);
if (itime >= ppp_settings.idle_time_limit) {
/* link is idle: shut it down. */
AUTHDEBUG(LOG_INFO, ("Terminating connection due to lack of activity.\n"));
lcp_close(0, "Link inactive");
} else {
TIMEOUT(check_idle, NULL, ppp_settings.idle_time_limit - itime);
}
}
/*
* connect_time_expired - log a message and close the connection.
*/
static void
connect_time_expired(void *arg)
{
LWIP_UNUSED_ARG(arg);
AUTHDEBUG(LOG_INFO, ("Connect time expired\n"));
lcp_close(0, "Connect time expired"); /* Close connection */
}
#if 0 /* UNUSED */
/*
* auth_check_options - called to check authentication options.
*/
void
auth_check_options(void)
{
lcp_options *wo = &lcp_wantoptions[0];
int can_auth;
ipcp_options *ipwo = &ipcp_wantoptions[0];
u32_t remote;
/* Default our_name to hostname, and user to our_name */
if (ppp_settings.our_name[0] == 0 || ppp_settings.usehostname) {
strcpy(ppp_settings.our_name, ppp_settings.hostname);
}
if (ppp_settings.user[0] == 0) {
strcpy(ppp_settings.user, ppp_settings.our_name);
}
/* If authentication is required, ask peer for CHAP or PAP. */
if (ppp_settings.auth_required && !wo->neg_chap && !wo->neg_upap) {
wo->neg_chap = 1;
wo->neg_upap = 1;
}
/*
* Check whether we have appropriate secrets to use
* to authenticate the peer.
*/
can_auth = wo->neg_upap && have_pap_secret();
if (!can_auth && wo->neg_chap) {
remote = ipwo->accept_remote? 0: ipwo->hisaddr;
can_auth = have_chap_secret(ppp_settings.remote_name, ppp_settings.our_name, remote);
}
if (ppp_settings.auth_required && !can_auth) {
ppp_panic("No auth secret");
}
}
#endif /* UNUSED */
/*
* auth_reset - called when LCP is starting negotiations to recheck
* authentication options, i.e. whether we have appropriate secrets
* to use for authenticating ourselves and/or the peer.
*/
void
auth_reset(int unit)
{
lcp_options *go = &lcp_gotoptions[unit];
lcp_options *ao = &lcp_allowoptions[0];
ipcp_options *ipwo = &ipcp_wantoptions[0];
u32_t remote;
AUTHDEBUG(LOG_INFO, ("auth_reset: %d\n", unit));
ao->neg_upap = !ppp_settings.refuse_pap && (ppp_settings.passwd[0] != 0 || get_pap_passwd(unit, NULL, NULL));
ao->neg_chap = !ppp_settings.refuse_chap && ppp_settings.passwd[0] != 0 /*have_chap_secret(ppp_settings.user, ppp_settings.remote_name, (u32_t)0)*/;
if (go->neg_upap && !have_pap_secret()) {
go->neg_upap = 0;
}
if (go->neg_chap) {
remote = ipwo->accept_remote? 0: ipwo->hisaddr;
if (!have_chap_secret(ppp_settings.remote_name, ppp_settings.our_name, remote)) {
go->neg_chap = 0;
}
}
}
#if PAP_SUPPORT
/*
* check_passwd - Check the user name and passwd against the PAP secrets
* file. If requested, also check against the system password database,
* and login the user if OK.
*
* returns:
* UPAP_AUTHNAK: Authentication failed.
* UPAP_AUTHACK: Authentication succeeded.
* In either case, msg points to an appropriate message.
*/
u_char
check_passwd( int unit, char *auser, int userlen, char *apasswd, int passwdlen, char **msg, int *msglen)
{
#if 1 /* XXX Assume all entries OK. */
LWIP_UNUSED_ARG(unit);
LWIP_UNUSED_ARG(auser);
LWIP_UNUSED_ARG(userlen);
LWIP_UNUSED_ARG(apasswd);
LWIP_UNUSED_ARG(passwdlen);
LWIP_UNUSED_ARG(msglen);
*msg = (char *) 0;
return UPAP_AUTHACK; /* XXX Assume all entries OK. */
#else
u_char ret = 0;
struct wordlist *addrs = NULL;
char passwd[256], user[256];
char secret[MAXWORDLEN];
static u_short attempts = 0;
/*
* Make copies of apasswd and auser, then null-terminate them.
*/
BCOPY(apasswd, passwd, passwdlen);
passwd[passwdlen] = '\0';
BCOPY(auser, user, userlen);
user[userlen] = '\0';
*msg = (char *) 0;
/* XXX Validate user name and password. */
ret = UPAP_AUTHACK; /* XXX Assume all entries OK. */
if (ret == UPAP_AUTHNAK) {
if (*msg == (char *) 0) {
*msg = "Login incorrect";
}
*msglen = strlen(*msg);
/*
* Frustrate passwd stealer programs.
* Allow 10 tries, but start backing off after 3 (stolen from login).
* On 10'th, drop the connection.
*/
if (attempts++ >= 10) {
AUTHDEBUG(LOG_WARNING, ("%d LOGIN FAILURES BY %s\n", attempts, user));
/*ppp_panic("Excess Bad Logins");*/
}
if (attempts > 3) {
/* @todo: this was sleep(), i.e. seconds, not milliseconds
* I don't think we really need this in lwIP - we would block tcpip_thread!
*/
/*sys_msleep((attempts - 3) * 5);*/
}
if (addrs != NULL) {
free_wordlist(addrs);
}
} else {
attempts = 0; /* Reset count */
if (*msg == (char *) 0) {
*msg = "Login ok";
}
*msglen = strlen(*msg);
set_allowed_addrs(unit, addrs);
}
BZERO(passwd, sizeof(passwd));
BZERO(secret, sizeof(secret));
return ret;
#endif
}
#endif /* PAP_SUPPORT */
#if 0 /* UNUSED */
/*
* This function is needed for PAM.
*/
#ifdef USE_PAM
/* lwip does not support PAM*/
#endif /* USE_PAM */
#endif /* UNUSED */
#if 0 /* UNUSED */
/*
* plogin - Check the user name and password against the system
* password database, and login the user if OK.
*
* returns:
* UPAP_AUTHNAK: Login failed.
* UPAP_AUTHACK: Login succeeded.
* In either case, msg points to an appropriate message.
*/
static int
plogin(char *user, char *passwd, char **msg, int *msglen)
{
LWIP_UNUSED_ARG(user);
LWIP_UNUSED_ARG(passwd);
LWIP_UNUSED_ARG(msg);
LWIP_UNUSED_ARG(msglen);
/* The new lines are here align the file when
* compared against the pppd 2.3.11 code */
/* XXX Fail until we decide that we want to support logins. */
return (UPAP_AUTHNAK);
}
#endif
/*
* plogout - Logout the user.
*/
static void
plogout(void)
{
logged_in = 0;
}
/*
* null_login - Check if a username of "" and a password of "" are
* acceptable, and iff so, set the list of acceptable IP addresses
* and return 1.
*/
static int
null_login(int unit)
{
LWIP_UNUSED_ARG(unit);
/* XXX Fail until we decide that we want to support logins. */
return 0;
}
/*
* get_pap_passwd - get a password for authenticating ourselves with
* our peer using PAP. Returns 1 on success, 0 if no suitable password
* could be found.
*/
static int
get_pap_passwd(int unit, char *user, char *passwd)
{
LWIP_UNUSED_ARG(unit);
/* normally we would reject PAP if no password is provided,
but this causes problems with some providers (like CHT in Taiwan)
who incorrectly request PAP and expect a bogus/empty password, so
always provide a default user/passwd of "none"/"none"
@todo: This should be configured by the user, instead of being hardcoded here!
*/
if(user) {
strcpy(user, "none");
}
if(passwd) {
strcpy(passwd, "none");
}
return 1;
}
/*
* have_pap_secret - check whether we have a PAP file with any
* secrets that we could possibly use for authenticating the peer.
*/
static int
have_pap_secret(void)
{
/* XXX Fail until we set up our passwords. */
return 0;
}
/*
* have_chap_secret - check whether we have a CHAP file with a
* secret that we could possibly use for authenticating `client'
* on `server'. Either can be the null string, meaning we don't
* know the identity yet.
*/
static int
have_chap_secret(char *client, char *server, u32_t remote)
{
LWIP_UNUSED_ARG(client);
LWIP_UNUSED_ARG(server);
LWIP_UNUSED_ARG(remote);
/* XXX Fail until we set up our passwords. */
return 0;
}
#if CHAP_SUPPORT
/*
* get_secret - open the CHAP secret file and return the secret
* for authenticating the given client on the given server.
* (We could be either client or server).
*/
int
get_secret(int unit, char *client, char *server, char *secret, int *secret_len, int save_addrs)
{
#if 1
int len;
struct wordlist *addrs;
LWIP_UNUSED_ARG(unit);
LWIP_UNUSED_ARG(server);
LWIP_UNUSED_ARG(save_addrs);
addrs = NULL;
if(!client || !client[0] || strcmp(client, ppp_settings.user)) {
return 0;
}
len = (int)strlen(ppp_settings.passwd);
if (len > MAXSECRETLEN) {
AUTHDEBUG(LOG_ERR, ("Secret for %s on %s is too long\n", client, server));
len = MAXSECRETLEN;
}
BCOPY(ppp_settings.passwd, secret, len);
*secret_len = len;
return 1;
#else
int ret = 0, len;
struct wordlist *addrs;
char secbuf[MAXWORDLEN];
addrs = NULL;
secbuf[0] = 0;
/* XXX Find secret. */
if (ret < 0) {
return 0;
}
if (save_addrs) {
set_allowed_addrs(unit, addrs);
}
len = strlen(secbuf);
if (len > MAXSECRETLEN) {
AUTHDEBUG(LOG_ERR, ("Secret for %s on %s is too long\n", client, server));
len = MAXSECRETLEN;
}
BCOPY(secbuf, secret, len);
BZERO(secbuf, sizeof(secbuf));
*secret_len = len;
return 1;
#endif
}
#endif /* CHAP_SUPPORT */
#if 0 /* PAP_SUPPORT || CHAP_SUPPORT */
/*
* set_allowed_addrs() - set the list of allowed addresses.
*/
static void
set_allowed_addrs(int unit, struct wordlist *addrs)
{
if (addresses[unit] != NULL) {
free_wordlist(addresses[unit]);
}
addresses[unit] = addrs;
#if 0
/*
* If there's only one authorized address we might as well
* ask our peer for that one right away
*/
if (addrs != NULL && addrs->next == NULL) {
char *p = addrs->word;
struct ipcp_options *wo = &ipcp_wantoptions[unit];
u32_t a;
struct hostent *hp;
if (wo->hisaddr == 0 && *p != '!' && *p != '-' && strchr(p, '/') == NULL) {
hp = gethostbyname(p);
if (hp != NULL && hp->h_addrtype == AF_INET) {
a = *(u32_t *)hp->h_addr;
} else {
a = inet_addr(p);
}
if (a != (u32_t) -1) {
wo->hisaddr = a;
}
}
}
#endif
}
#endif /* 0 */ /* PAP_SUPPORT || CHAP_SUPPORT */
/*
* auth_ip_addr - check whether the peer is authorized to use
* a given IP address. Returns 1 if authorized, 0 otherwise.
*/
int
auth_ip_addr(int unit, u32_t addr)
{
return ip_addr_check(addr, addresses[unit]);
}
static int /* @todo: integrate this funtion into auth_ip_addr()*/
ip_addr_check(u32_t addr, struct wordlist *addrs)
{
/* don't allow loopback or multicast address */
if (bad_ip_adrs(addr)) {
return 0;
}
if (addrs == NULL) {
return !ppp_settings.auth_required; /* no addresses authorized */
}
/* XXX All other addresses allowed. */
return 1;
}
/*
* bad_ip_adrs - return 1 if the IP address is one we don't want
* to use, such as an address in the loopback net or a multicast address.
* addr is in network byte order.
*/
int
bad_ip_adrs(u32_t addr)
{
addr = ntohl(addr);
return (addr >> IN_CLASSA_NSHIFT) == IN_LOOPBACKNET
|| IN_MULTICAST(addr) || IN_BADCLASS(addr);
}
#if 0 /* UNUSED */ /* PAP_SUPPORT || CHAP_SUPPORT */
/*
* some_ip_ok - check a wordlist to see if it authorizes any
* IP address(es).
*/
static int
some_ip_ok(struct wordlist *addrs)
{
for (; addrs != 0; addrs = addrs->next) {
if (addrs->word[0] == '-')
break;
if (addrs->word[0] != '!')
return 1; /* some IP address is allowed */
}
return 0;
}
/*
* check_access - complain if a secret file has too-liberal permissions.
*/
static void
check_access(FILE *f, char *filename)
{
struct stat sbuf;
if (fstat(fileno(f), &sbuf) < 0) {
warn("cannot stat secret file %s: %m", filename);
} else if ((sbuf.st_mode & (S_IRWXG | S_IRWXO)) != 0) {
warn("Warning - secret file %s has world and/or group access",
filename);
}
}
/*
* scan_authfile - Scan an authorization file for a secret suitable
* for authenticating `client' on `server'. The return value is -1
* if no secret is found, otherwise >= 0. The return value has
* NONWILD_CLIENT set if the secret didn't have "*" for the client, and
* NONWILD_SERVER set if the secret didn't have "*" for the server.
* Any following words on the line up to a "--" (i.e. address authorization
* info) are placed in a wordlist and returned in *addrs. Any
* following words (extra options) are placed in a wordlist and
* returned in *opts.
* We assume secret is NULL or points to MAXWORDLEN bytes of space.
*/
static int
scan_authfile(FILE *f, char *client, char *server, char *secret, struct wordlist **addrs, struct wordlist **opts, char *filename)
{
/* We do not (currently) need this in lwip */
return 0; /* dummy */
}
/*
* free_wordlist - release memory allocated for a wordlist.
*/
static void
free_wordlist(struct wordlist *wp)
{
struct wordlist *next;
while (wp != NULL) {
next = wp->next;
free(wp);
wp = next;
}
}
/*
* auth_script_done - called when the auth-up or auth-down script
* has finished.
*/
static void
auth_script_done(void *arg)
{
auth_script_pid = 0;
switch (auth_script_state) {
case s_up:
if (auth_state == s_down) {
auth_script_state = s_down;
auth_script(_PATH_AUTHDOWN);
}
break;
case s_down:
if (auth_state == s_up) {
auth_script_state = s_up;
auth_script(_PATH_AUTHUP);
}
break;
}
}
/*
* auth_script - execute a script with arguments
* interface-name peer-name real-user tty speed
*/
static void
auth_script(char *script)
{
char strspeed[32];
struct passwd *pw;
char struid[32];
char *user_name;
char *argv[8];
if ((pw = getpwuid(getuid())) != NULL && pw->pw_name != NULL)
user_name = pw->pw_name;
else {
slprintf(struid, sizeof(struid), "%d", getuid());
user_name = struid;
}
slprintf(strspeed, sizeof(strspeed), "%d", baud_rate);
argv[0] = script;
argv[1] = ifname;
argv[2] = peer_authname;
argv[3] = user_name;
argv[4] = devnam;
argv[5] = strspeed;
argv[6] = NULL;
auth_script_pid = run_program(script, argv, 0, auth_script_done, NULL);
}
#endif /* 0 */ /* PAP_SUPPORT || CHAP_SUPPORT */
#endif /* PPP_SUPPORT */