| /*This file is prepared for Doxygen automatic documentation generation.*/ | |
| /*! \file ****************************************************************** | |
| * | |
| * \brief Ethernet module configuration file. | |
| * | |
| * This file contains the possible external configuration of the Ethernet module. | |
| * | |
| * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 | |
| * - Supported devices: All AVR32 devices can be used. | |
| * - AppNote: | |
| * | |
| * \author Atmel Corporation: http://www.atmel.com \n | |
| * Support and FAQ: http://support.atmel.no/ | |
| * | |
| ***************************************************************************/ | |
| /* Copyright (c) 2007, Atmel Corporation All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions are met: | |
| * | |
| * 1. Redistributions of source code must retain the above copyright notice, | |
| * this list of conditions and the following disclaimer. | |
| * | |
| * 2. Redistributions in binary form must reproduce the above copyright notice, | |
| * this list of conditions and the following disclaimer in the documentation | |
| * and/or other materials provided with the distribution. | |
| * | |
| * 3. The name of ATMEL may not be used to endorse or promote products derived | |
| * from this software without specific prior written permission. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS OR IMPLIED | |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF | |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND | |
| * SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, | |
| * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES | |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; | |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND | |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF | |
| * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| */ | |
| #ifndef _CONF_ETH_H_ | |
| #define _CONF_ETH_H_ | |
| /*! define stack size for WEB server task */ | |
| #define lwipBASIC_WEB_SERVER_STACK_SIZE 256 | |
| /*! define stack size for TFTP server task */ | |
| #define lwipBASIC_TFTP_SERVER_STACK_SIZE 1024 | |
| /*! define stack size for SMTP Client task */ | |
| #define lwipBASIC_SMTP_CLIENT_STACK_SIZE 256 | |
| /*! define stack size for lwIP task */ | |
| #define lwipINTERFACE_STACK_SIZE 512 | |
| /*! define stack size for netif task */ | |
| #define netifINTERFACE_TASK_STACK_SIZE 256 | |
| /*! define WEB server priority */ | |
| #define ethWEBSERVER_PRIORITY ( tskIDLE_PRIORITY + 2 ) | |
| /*! define TFTP server priority */ | |
| #define ethTFTPSERVER_PRIORITY ( tskIDLE_PRIORITY + 3 ) | |
| /*! define SMTP Client priority */ | |
| #define ethSMTPCLIENT_PRIORITY ( tskIDLE_PRIORITY + 5 ) | |
| /*! define lwIP task priority */ | |
| #define lwipINTERFACE_TASK_PRIORITY ( configMAX_PRIORITIES - 1 ) | |
| /*! define netif task priority */ | |
| #define netifINTERFACE_TASK_PRIORITY ( configMAX_PRIORITIES - 1 ) | |
| /*! Number of threads that can be started with sys_thread_new() */ | |
| #define SYS_THREAD_MAX 6 | |
| /*! LED used by the ethernet task, toggled on each activation */ | |
| #define webCONN_LED 7 | |
| /*! Phy Address (set through strap options) */ | |
| #define ETHERNET_CONF_PHY_ADDR 0x01 | |
| #define ETHERNET_CONF_PHY_ID 0x20005C90 | |
| /*! Number of receive buffers */ | |
| #define ETHERNET_CONF_NB_RX_BUFFERS 20 | |
| /*! USE_RMII_INTERFACE must be defined as 1 to use an RMII interface, or 0 | |
| to use an MII interface. */ | |
| #define ETHERNET_CONF_USE_RMII_INTERFACE 1 | |
| /*! Number of Transmit buffers */ | |
| #define ETHERNET_CONF_NB_TX_BUFFERS 10 | |
| /*! Size of each Transmit buffer. */ | |
| #define ETHERNET_CONF_TX_BUFFER_SIZE 512 | |
| /*! Clock definition */ | |
| #define ETHERNET_CONF_SYSTEM_CLOCK 48000000 | |
| /*! Use Auto Negociation to get speed and duplex */ | |
| #define ETHERNET_CONF_AN_ENABLE 1 | |
| /*! Do not use auto cross capability */ | |
| #define ETHERNET_CONF_AUTO_CROSS_ENABLE 0 | |
| /*! use direct cable */ | |
| #define ETHERNET_CONF_CROSSED_LINK 0 | |
| /* ethernet default parameters */ | |
| /*! MAC address definition. The MAC address must be unique on the network. */ | |
| #define ETHERNET_CONF_ETHADDR0 0x00 | |
| #define ETHERNET_CONF_ETHADDR1 0x04 | |
| #define ETHERNET_CONF_ETHADDR2 0x25 | |
| #define ETHERNET_CONF_ETHADDR3 0x40 | |
| #define ETHERNET_CONF_ETHADDR4 0x40 | |
| #define ETHERNET_CONF_ETHADDR5 0x40 | |
| /*! The IP address being used. */ | |
| #define ETHERNET_CONF_IPADDR0 192 | |
| #define ETHERNET_CONF_IPADDR1 168 | |
| #define ETHERNET_CONF_IPADDR2 0 | |
| #define ETHERNET_CONF_IPADDR3 2 | |
| /*! The gateway address being used. */ | |
| #define ETHERNET_CONF_GATEWAY_ADDR0 192 | |
| #define ETHERNET_CONF_GATEWAY_ADDR1 168 | |
| #define ETHERNET_CONF_GATEWAY_ADDR2 0 | |
| #define ETHERNET_CONF_GATEWAY_ADDR3 1 | |
| /*! The network mask being used. */ | |
| #define ETHERNET_CONF_NET_MASK0 255 | |
| #define ETHERNET_CONF_NET_MASK1 255 | |
| #define ETHERNET_CONF_NET_MASK2 255 | |
| #define ETHERNET_CONF_NET_MASK3 0 | |
| #endif |