blob: ad36ef5043e6feed0ddaa4d3795f2b869a256223 [file] [log] [blame]
//*----------------------------------------------------------------------------
//* ATMEL Microcontroller Software Support - ROUSSET -
//*----------------------------------------------------------------------------
//* The software is delivered "AS IS" without warranty or condition of any
//* kind, either express, implied or statutory. This includes without
//* limitation any warranty or condition with respect to merchantability or
//* fitness for any particular purpose, or against the infringements of
//* intellectual property rights of others.
//*-----------------------------------------------------------------------------
//* File Name : usart.h
//* Object : USART Header File.
//*
//* 1.0 01/04/00 JCZ : Creation
//*----------------------------------------------------------------------------
#ifndef usart_h
#define usart_h
//#include "periph/stdc/std_c.h"
//#include "periph/pio/lib_pio.h"
/*-------------------------------------------*/
/* USART User Interface Structure Definition */
/*-------------------------------------------*/
typedef struct
{
at91_reg US_CR ; /* Control Register */
at91_reg US_MR ; /* Mode Register */
at91_reg US_IER ; /* Interrupt Enable Register */
at91_reg US_IDR ; /* Interrupt Disable Register */
at91_reg US_IMR ; /* Interrupt Mask Register */
at91_reg US_CSR ; /* Channel Status Register */
at91_reg US_RHR ; /* Receive Holding Register */
at91_reg US_THR ; /* Transmit Holding Register */
at91_reg US_BRGR ; /* Baud Rate Generator Register */
at91_reg US_RTOR ; /* Receiver Timeout Register */
at91_reg US_TTGR ; /* Transmitter Time-guard Register */
at91_reg Reserved ;
at91_reg US_RPR ; /* Receiver Pointer Register */
at91_reg US_RCR ; /* Receiver Counter Register */
at91_reg US_TPR ; /* Transmitter Pointer Register */
at91_reg US_TCR ; /* Transmitter Counter Register */
} StructUSART ;
/*--------------------------*/
/* US_CR : Control Register */
/*--------------------------*/
#define US_RSTRX 0x0004 /* Reset Receiver */
#define US_RSTTX 0x0008 /* Reset Transmitter */
#define US_RXEN 0x0010 /* Receiver Enable */
#define US_RXDIS 0x0020 /* Receiver Disable */
#define US_TXEN 0x0040 /* Transmitter Enable */
#define US_TXDIS 0x0080 /* Transmitter Disable */
#define US_RSTSTA 0x0100 /* Reset Status Bits */
#define US_STTBRK 0x0200 /* Start Break */
#define US_STPBRK 0x0400 /* Stop Break */
#define US_STTTO 0x0800 /* Start Time-out */
#define US_SENDA 0x1000 /* Send Address */
/*-----------------------*/
/* US_MR : Mode Register */
/*-----------------------*/
#define US_CLKS 0x0030 /* Clock Selection */
#define US_CLKS_MCK 0x00 /* Master Clock */
#define US_CLKS_MCK8 0x10 /* Master Clock divided by 8 */
#define US_CLKS_SCK 0x20 /* External Clock */
#define US_CLKS_SLCK 0x30 /* Slow Clock */
#define US_CHRL 0x00C0 /* Byte Length */
#define US_CHRL_5 0x00 /* 5 bits */
#define US_CHRL_6 0x40 /* 6 bits */
#define US_CHRL_7 0x80 /* 7 bits */
#define US_CHRL_8 0xC0 /* 8 bits */
#define US_SYNC 0x0100 /* Synchronous Mode Enable */
#define US_PAR 0x0E00 /* Parity Mode */
#define US_PAR_EVEN 0x00 /* Even Parity */
#define US_PAR_ODD 0x200 /* Odd Parity */
#define US_PAR_SPACE 0x400 /* Space Parity to 0 */
#define US_PAR_MARK 0x600 /* Marked Parity to 1 */
#define US_PAR_NO 0x800 /* No Parity */
#define US_PAR_MULTIDROP 0xC00 /* Multi-drop Mode */
#define US_NBSTOP 0x3000 /* Stop Bit Number */
#define US_NBSTOP_1 0x0000 /* 1 Stop Bit */
#define US_NBSTOP_1_5 0x1000 /* 1.5 Stop Bits */
#define US_NBSTOP_2 0x2000 /* 2 Stop Bits */
#define US_CHMODE 0xC000 /* Channel Mode */
#define US_CHMODE_NORMAL 0x0000 /* Normal Mode */
#define US_CHMODE_AUTOMATIC_ECHO 0x4000 /* Automatic Echo */
#define US_CHMODE_LOCAL_LOOPBACK 0x8000 /* Local Loopback */
#define US_CHMODE_REMOTE_LOOPBACK 0xC000 /* Remote Loopback */
#define US_MODE9 0x20000 /* 9 Bit Mode */
#define US_CLKO 0x40000 /* Baud Rate Output Enable */
/* Mode Register model */
/* Standard Asynchronous Mode : 8 bits , 1 stop , no parity */
#define US_ASYNC_MODE ( US_CHMODE_NORMAL + \
US_NBSTOP_1 + \
US_PAR_NO + \
US_CHRL_8 + \
US_CLKS_MCK )
/* Standard External Asynchronous Mode : 8 bits , 1 stop , no parity */
#define US_ASYNC_SCK_MODE ( US_CHMODE_NORMAL + \
US_NBSTOP_1 + \
US_PAR_NO + \
US_CHRL_8 + \
US_CLKS_SCK )
/* Standard Synchronous Mode : 8 bits , 1 stop , no parity */
#define US_SYNC_MODE ( US_SYNC + \
US_CHMODE_NORMAL + \
US_NBSTOP_1 + \
US_PAR_NO + \
US_CHRL_8 + \
US_CLKS_MCK )
/* SCK used Label */
#define SCK_USED (US_CLKO | US_CLKS_SCK)
/*---------------------------------------------------------------*/
/* US_IER, US_IDR, US_IMR, US_IMR: Status and Interrupt Register */
/*---------------------------------------------------------------*/
#define US_RXRDY 0x1 /* Receiver Ready */
#define US_TXRDY 0x2 /* Transmitter Ready */
#define US_RXBRK 0x4 /* Receiver Break */
#define US_ENDRX 0x8 /* End of Receiver PDC Transfer */
#define US_ENDTX 0x10 /* End of Transmitter PDC Transfer */
#define US_OVRE 0x20 /* Overrun Error */
#define US_FRAME 0x40 /* Framing Error */
#define US_PARE 0x80 /* Parity Error */
#define US_TIMEOUT 0x100 /* Receiver Timeout */
#define US_TXEMPTY 0x200 /* Transmitter Empty */
#define US_MASK_IRQ_TX (US_TXRDY | US_ENDTX | US_TXEMPTY)
#define US_MASK_IRQ_RX (US_RXRDY | US_ENDRX | US_TIMEOUT)
#define US_MASK_IRQ_ERROR (US_PARE | US_FRAME | US_OVRE | US_RXBRK)
#endif /* usart_h */