blob: bef5dc61887bd0c2f3f9221c0712bab7c1172689 [file] [log] [blame] [edit]
//*****************************************************************************
//
// hw_memmap.h - Macros defining the memory map of Stellaris.
//
// Copyright (c) 2005,2006 Luminary Micro, Inc. All rights reserved.
//
// Software License Agreement
//
// Luminary Micro, Inc. (LMI) is supplying this software for use solely and
// exclusively on LMI's Stellaris Family of microcontroller products.
//
// The software is owned by LMI and/or its suppliers, and is protected under
// applicable copyright laws. All rights are reserved. Any use in violation
// of the foregoing restrictions may subject the user to criminal sanctions
// under applicable laws, as well as to civil liability for the breach of the
// terms and conditions of this license.
//
// THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
// OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
// LMI SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
// CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
//
// This is part of revision 523 of the Stellaris Driver Library.
//
//*****************************************************************************
#ifndef __HW_MEMMAP_H__
#define __HW_MEMMAP_H__
//*****************************************************************************
//
// The following define the base address of the memories and peripherals.
//
//*****************************************************************************
#define FLASH_BASE 0x00000000 // FLASH memory
#define SRAM_BASE 0x20000000 // SRAM memory
#define WATCHDOG_BASE 0x40000000 // Watchdog
#define GPIO_PORTA_BASE 0x40004000 // GPIO Port A
#define GPIO_PORTB_BASE 0x40005000 // GPIO Port B
#define GPIO_PORTC_BASE 0x40006000 // GPIO Port C
#define SSI_BASE 0x40008000 // SSI
#define UART0_BASE 0x4000C000 // UART0
#define I2C_MASTER_BASE 0x40020000 // I2C Master
#define I2C_SLAVE_BASE 0x40020800 // I2C Slave
#define TIMER0_BASE 0x40030000 // Timer0
#define TIMER1_BASE 0x40031000 // Timer1
#define COMP_BASE 0x4003C000 // Analog comparators
#define FLASH_CTRL_BASE 0x400FD000 // FLASH Controller
#define SYSCTL_BASE 0x400FE000 // System Control
#define ITM_BASE 0xE0000000 // Instrumentation Trace Macrocell
#define DWT_BASE 0xE0001000 // Data Watchpoint and Trace
#define FPB_BASE 0xE0002000 // FLASH Patch and Breakpoint
#define NVIC_BASE 0xE000E000 // Nested Vectored Interrupt Ctrl
#define TPIU_BASE 0xE0040000 // Trace Port Interface Unit
#endif // __HW_MEMMAP_H__