blob: 88d657223b488bf349c3cd4012a892ff46358187 [file] [log] [blame] [edit]
//*****************************************************************************
//
// gpio.h - Defines and Macros for GPIO API.
//
// Copyright (c) 2005,2006 Luminary Micro, Inc. All rights reserved.
//
// Software License Agreement
//
// Luminary Micro, Inc. (LMI) is supplying this software for use solely and
// exclusively on LMI's Stellaris Family of microcontroller products.
//
// The software is owned by LMI and/or its suppliers, and is protected under
// applicable copyright laws. All rights are reserved. Any use in violation
// of the foregoing restrictions may subject the user to criminal sanctions
// under applicable laws, as well as to civil liability for the breach of the
// terms and conditions of this license.
//
// THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
// OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
// LMI SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
// CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
//
// This is part of revision 991 of the Stellaris Driver Library.
//
//*****************************************************************************
#ifndef __GPIO_H__
#define __GPIO_H__
#ifdef __cplusplus
extern "C"
{
#endif
//*****************************************************************************
//
// The following values define the bit field for the ucPins argument to several
// of the APIs.
//
//*****************************************************************************
#define GPIO_PIN_0 0x00000001 // GPIO pin 0
#define GPIO_PIN_1 0x00000002 // GPIO pin 1
#define GPIO_PIN_2 0x00000004 // GPIO pin 2
#define GPIO_PIN_3 0x00000008 // GPIO pin 3
#define GPIO_PIN_4 0x00000010 // GPIO pin 4
#define GPIO_PIN_5 0x00000020 // GPIO pin 5
#define GPIO_PIN_6 0x00000040 // GPIO pin 6
#define GPIO_PIN_7 0x00000080 // GPIO pin 7
//*****************************************************************************
//
// Values that can be passed to GPIODirModeSet as the ulPinIO parameter, and
// returned from GPIODirModeGet.
//
//*****************************************************************************
#define GPIO_DIR_MODE_IN 0x00000000 // Pin is a GPIO input
#define GPIO_DIR_MODE_OUT 0x00000001 // Pin is a GPIO output
#define GPIO_DIR_MODE_HW 0x00000002 // Pin is a peripheral function
//*****************************************************************************
//
// Values that can be passed to GPIOIntTypeSet as the ulIntType parameter, and
// returned from GPIOIntTypeGet.
//
//*****************************************************************************
#define GPIO_FALLING_EDGE 0x00000000 // Interrupt on falling edge
#define GPIO_RISING_EDGE 0x00000004 // Interrupt on rising edge
#define GPIO_BOTH_EDGES 0x00000001 // Interrupt on both edges
#define GPIO_LOW_LEVEL 0x00000002 // Interrupt on low level
#define GPIO_HIGH_LEVEL 0x00000007 // Interrupt on high level
//*****************************************************************************
//
// Values that can be passed to GPIOPadConfigSet as the ulStrength parameter,
// and returned by GPIOPadConfigGet in the *pulStrength parameter.
//
//*****************************************************************************
#define GPIO_STRENGTH_2MA 0x00000001 // 2mA drive strength
#define GPIO_STRENGTH_4MA 0x00000002 // 4mA drive strength
#define GPIO_STRENGTH_8MA 0x00000004 // 8mA drive strength
#define GPIO_STRENGTH_8MA_SC 0x0000000C // 8mA drive with slew rate control
//*****************************************************************************
//
// Values that can be passed to GPIOPadConfigSet as the ulPadType parameter,
// and returned by GPIOPadConfigGet in the *pulPadType parameter.
//
//*****************************************************************************
#define GPIO_PIN_TYPE_STD 0x00000008 // Push-pull
#define GPIO_PIN_TYPE_STD_WPU 0x0000000A // Push-pull with weak pull-up
#define GPIO_PIN_TYPE_STD_WPD 0x0000000C // Push-pull with weak pull-down
#define GPIO_PIN_TYPE_OD 0x00000009 // Open-drain
#define GPIO_PIN_TYPE_OD_WPU 0x0000000B // Open-drain with weak pull-up
#define GPIO_PIN_TYPE_OD_WPD 0x0000000D // Open-drain with weak pull-down
#define GPIO_PIN_TYPE_ANALOG 0x00000000 // Analog comparator
//*****************************************************************************
//
// Prototypes for the APIs.
//
//*****************************************************************************
extern void GPIODirModeSet(unsigned long ulPort, unsigned char ucPins,
unsigned long ulPinIO);
extern unsigned long GPIODirModeGet(unsigned long ulPort, unsigned char ucPin);
extern void GPIOIntTypeSet(unsigned long ulPort, unsigned char ucPins,
unsigned long ulIntType);
extern unsigned long GPIOIntTypeGet(unsigned long ulPort, unsigned char ucPin);
extern void GPIOPadConfigSet(unsigned long ulPort, unsigned char ucPins,
unsigned long ulStrength,
unsigned long ulPadType);
extern void GPIOPadConfigGet(unsigned long ulPort, unsigned char ucPin,
unsigned long *pulStrength,
unsigned long *pulPadType);
extern void GPIOPinIntEnable(unsigned long ulPort, unsigned char ucPins);
extern void GPIOPinIntDisable(unsigned long ulPort, unsigned char ucPins);
extern long GPIOPinIntStatus(unsigned long ulPort, tBoolean bMasked);
extern void GPIOPinIntClear(unsigned long ulPort, unsigned char ucPins);
extern void GPIOPortIntRegister(unsigned long ulPort,
void (*pfIntHandler)(void));
extern void GPIOPortIntUnregister(unsigned long ulPort);
extern long GPIOPinRead(unsigned long ulPort, unsigned char ucPins);
extern void GPIOPinWrite(unsigned long ulPort, unsigned char ucPins,
unsigned char ucVal);
extern void GPIOPinTypeComparator(unsigned long ulPort, unsigned char ucPins);
extern void GPIOPinTypeI2C(unsigned long ulPort, unsigned char ucPins);
extern void GPIOPinTypePWM(unsigned long ulPort, unsigned char ucPins);
extern void GPIOPinTypeQEI(unsigned long ulPort, unsigned char ucPins);
extern void GPIOPinTypeSSI(unsigned long ulPort, unsigned char ucPins);
extern void GPIOPinTypeTimer(unsigned long ulPort, unsigned char ucPins);
extern void GPIOPinTypeUART(unsigned long ulPort, unsigned char ucPins);
#ifdef __cplusplus
}
#endif
#endif // __GPIO_H__