| /* Copyright (c) 2017, Nordic Semiconductor ASA |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright notice, this |
| * list of conditions and the following disclaimer. |
| * |
| * 2. Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following disclaimer in the documentation |
| * and/or other materials provided with the distribution. |
| * |
| * 3. Neither the name of Nordic Semiconductor ASA nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
| * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
| * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
| * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| */ |
| |
| #ifndef NRF_DRIVER_RADIO802154_SWI_H__ |
| #define NRF_DRIVER_RADIO802154_SWI_H__ |
| |
| #include <stdbool.h> |
| #include <stdint.h> |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /** |
| * @defgroup nrf_driver_radio802154_swi 802.15.4 driver SWI management |
| * @{ |
| * @ingroup nrf_driver_radio802154 |
| * @brief SWI manager for 802.15.4 driver. |
| */ |
| |
| /** |
| * @brief Initialize SWI module. |
| */ |
| void nrf_drv_radio802154_swi_init(void); |
| |
| /** |
| * @brief Notify next higher layer that a frame was received from SWI priority level. |
| * |
| * @param[in] p_data Array of bytes containing PSDU. First byte contains frame length, other contain the frame itself. |
| * @param[in] power RSSI measured during the frame reception. |
| * @param[in] lqi LQI indicating measured link quality during the frame reception. |
| */ |
| void nrf_drv_radio802154_swi_notify_received(uint8_t * p_data, int8_t power, int8_t lqi); |
| |
| /** |
| * @brief Notify next higher layer that a frame was transmitted from SWI priority level. |
| * |
| * @param[in] p_ack Pointer to buffer containing PSDU of ACK frame. NULL if ACK was not requested. |
| * @param[in] power RSSI of received frame or 0 if ACK was not requested. |
| * @param[in] lqi LQI of received frame of 0 if ACK was not requested. |
| */ |
| void nrf_drv_radio802154_swi_notify_transmitted(uint8_t * p_data, int8_t power, int8_t lqi); |
| |
| /** |
| * @brief Notify next higher layer that a frame was not transmitted from SWI priority level. |
| */ |
| void nrf_drv_radio802154_swi_notify_busy_channel(void); |
| |
| /** |
| * @brief Notify next higher layer that energy detection procedure ended from SWI priority level. |
| * |
| * @param[in] result Detected energy level. |
| */ |
| void nrf_drv_radio802154_swi_notify_energy_detected(int8_t result); |
| |
| /** |
| * @brief Request discarding of the timeslot from SWI priority level. |
| * |
| * @note This function should be called through notification module to prevent calling it from arbiter context. |
| */ |
| void nrf_drv_radio802154_swi_timeslot_exit(void); |
| |
| /** |
| * @brief Request entering sleep state from SWI priority. |
| * |
| * @param[out] p_result Result of entering sleep state. |
| */ |
| void nrf_drv_radio802154_swi_sleep(bool * p_result); |
| |
| /** |
| * @brief Request entering receive state from SWI priority. |
| * |
| * @param[in] channel Channel number used for receive procedure. |
| * @param[out] p_result Result of entering receive state. |
| */ |
| void nrf_drv_radio802154_swi_receive(uint8_t channel, bool * p_result); |
| |
| /** |
| * @biref Request entering transmit state from SWI priority. |
| * |
| * @param[in] p_data Pointer to PSDU of the frame to transmit. |
| * @param[in] channel Channel number used for requested transmission. |
| * @param[in] power Transmitter power for requested transmission. |
| * @param[in] cca If the driver should perform CCA procedure before transmission. |
| * @param[out] p_result Result of entering transmit state. |
| */ |
| void nrf_drv_radio802154_swi_transmit(const uint8_t * p_data, |
| uint8_t channel, |
| int8_t power, |
| bool cca, |
| bool * p_result); |
| |
| /** |
| * @brief Request entering energy detection state from SWI priority. |
| * |
| * @param[in] channel Channel number used for the energy detection procedure. |
| * @param[in] time_us Requested duration of energy detection procedure. |
| * @param[out] p_result Result of entering energy detection state. |
| */ |
| void nrf_drv_radio802154_swi_energy_detection(uint8_t channel, uint32_t time_us, bool * p_result); |
| |
| /** |
| * @brief Notify FSM that given buffer is not used anymore and can be freed. |
| * |
| * @param[in] p_data Pointer to the buffer to free. |
| */ |
| void nrf_drv_radio802154_swi_buffer_free(uint8_t * p_data); |
| |
| /** |
| *@} |
| **/ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif // NRF_DRIVER_RADIO802154_SWI_H__ |