| /* | |
| * Copyright (c) 2001-2003 Swedish Institute of Computer Science. | |
| * All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without modification, | |
| * are permitted provided that the following conditions are met: | |
| * | |
| * 1. Redistributions of source code must retain the above copyright notice, | |
| * this list of conditions and the following disclaimer. | |
| * 2. Redistributions in binary form must reproduce the above copyright notice, | |
| * this list of conditions and the following disclaimer in the documentation | |
| * and/or other materials provided with the distribution. | |
| * 3. The name of the author may not be used to endorse or promote products | |
| * derived from this software without specific prior written permission. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED | |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF | |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT | |
| * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, | |
| * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT | |
| * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS | |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN | |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING | |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY | |
| * OF SUCH DAMAGE. | |
| * | |
| * This file is part of the lwIP TCP/IP stack. | |
| * | |
| * Author: Adam Dunkels <adam@sics.se> | |
| * | |
| */ | |
| #ifndef __LWIPOPTS_H__ | |
| #define __LWIPOPTS_H__ | |
| #define LWIP_NOASSERT 1 // To suppress some errors for now (no debug output) | |
| #define SYS_LIGHTWEIGHT_PROT 1 | |
| #define TCPIP_THREAD_PRIO 3 | |
| /* ---------- Memory options ---------- */ | |
| /* MEM_ALIGNMENT: should be set to the alignment of the CPU for which | |
| lwIP is compiled. 4 byte alignment -> define MEM_ALIGNMENT to 4, 2 | |
| byte alignment -> define MEM_ALIGNMENT to 2. */ | |
| #define MEM_ALIGNMENT 4 | |
| /* MEM_SIZE: the size of the heap memory. If the application will send | |
| a lot of data that needs to be copied, this should be set high. */ | |
| #define MEM_SIZE 2000 | |
| /* MEMP_NUM_PBUF: the number of memp struct pbufs. If the application | |
| sends a lot of data out of ROM (or other static memory), this | |
| should be set high. */ | |
| #define MEMP_NUM_PBUF 20 | |
| /* MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One | |
| per active UDP "connection". */ | |
| #define MEMP_NUM_UDP_PCB 4 | |
| /* MEMP_NUM_TCP_PCB: the number of simulatenously active TCP | |
| connections. */ | |
| #define MEMP_NUM_TCP_PCB 10 | |
| /* MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP | |
| connections. */ | |
| #define MEMP_NUM_TCP_PCB_LISTEN 8 | |
| /* MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP | |
| segments. */ | |
| #define MEMP_NUM_TCP_SEG 8 | |
| /* MEMP_NUM_SYS_TIMEOUT: the number of simulateously active | |
| timeouts. */ | |
| #define MEMP_NUM_SYS_TIMEOUT 3 | |
| /* The following four are used only with the sequential API and can be | |
| set to 0 if the application only will use the raw API. */ | |
| /* MEMP_NUM_NETBUF: the number of struct netbufs. */ | |
| #define MEMP_NUM_NETBUF 4 | |
| /* MEMP_NUM_NETCONN: the number of struct netconns. */ | |
| #define MEMP_NUM_NETCONN 4 | |
| /* MEMP_NUM_APIMSG: the number of struct api_msg, used for | |
| communication between the TCP/IP stack and the sequential | |
| programs. */ | |
| #define MEMP_NUM_API_MSG 8 | |
| /* MEMP_NUM_TCPIPMSG: the number of struct tcpip_msg, which is used | |
| for sequential API communication and incoming packets. Used in | |
| src/api/tcpip.c. */ | |
| #define MEMP_NUM_TCPIP_MSG 8 | |
| /* These two control is reclaimer functions should be compiled | |
| in. Should always be turned on (1). */ | |
| #define MEM_RECLAIM 1 | |
| #define MEMP_RECLAIM 1 | |
| /* ---------- Pbuf options ---------- */ | |
| /* PBUF_POOL_SIZE: the number of buffers in the pbuf pool. */ | |
| #define PBUF_POOL_SIZE 4 | |
| /* PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. */ | |
| #define PBUF_POOL_BUFSIZE 1500 | |
| /* PBUF_LINK_HLEN: the number of bytes that should be allocated for a | |
| link level header. */ | |
| #define PBUF_LINK_HLEN 16 | |
| /* ---------- TCP options ---------- */ | |
| #define LWIP_TCP 1 | |
| #define TCP_TTL 255 | |
| /* Controls if TCP should queue segments that arrive out of | |
| order. Define to 0 if your device is low on memory. */ | |
| #define TCP_QUEUE_OOSEQ 1 | |
| /* TCP Maximum segment size. */ | |
| #define TCP_MSS 1500 | |
| /* TCP sender buffer space (bytes). */ | |
| #define TCP_SND_BUF 1500 | |
| /* TCP sender buffer space (pbufs). This must be at least = 2 * | |
| TCP_SND_BUF/TCP_MSS for things to work. */ | |
| #define TCP_SND_QUEUELEN 6 * TCP_SND_BUF/TCP_MSS | |
| /* TCP receive window. */ | |
| #define TCP_WND 1500 | |
| /* Maximum number of retransmissions of data segments. */ | |
| #define TCP_MAXRTX 12 | |
| /* Maximum number of retransmissions of SYN segments. */ | |
| #define TCP_SYNMAXRTX 4 | |
| /* ---------- ARP options ---------- */ | |
| #define ARP_TABLE_SIZE 10 | |
| #define ARP_QUEUEING 1 | |
| /* ---------- IP options ---------- */ | |
| /* Define IP_FORWARD to 1 if you wish to have the ability to forward | |
| IP packets across network interfaces. If you are going to run lwIP | |
| on a device with only one network interface, define this to 0. */ | |
| #define IP_FORWARD 1 | |
| /* If defined to 1, IP options are allowed (but not parsed). If | |
| defined to 0, all packets with IP options are dropped. */ | |
| #define IP_OPTIONS 1 | |
| /* ---------- ICMP options ---------- */ | |
| #define ICMP_TTL 255 | |
| /* ---------- DHCP options ---------- */ | |
| /* Define LWIP_DHCP to 1 if you want DHCP configuration of | |
| interfaces. DHCP is not implemented in lwIP 0.5.1, however, so | |
| turning this on does currently not work. */ | |
| #define LWIP_DHCP 0 | |
| /* 1 if you want to do an ARP check on the offered address | |
| (recommended). */ | |
| #define DHCP_DOES_ARP_CHECK 1 | |
| /* ---------- UDP options ---------- */ | |
| #define LWIP_UDP 1 | |
| #define UDP_TTL 255 | |
| /* ---------- Statistics options ---------- */ | |
| #define STATS | |
| #ifdef STATS | |
| #define LINK_STATS 1 | |
| #define IP_STATS 1 | |
| #define ICMP_STATS 1 | |
| #define UDP_STATS 1 | |
| #define TCP_STATS 1 | |
| #define MEM_STATS 1 | |
| #define MEMP_STATS 1 | |
| #define PBUF_STATS 1 | |
| #define SYS_STATS 1 | |
| #endif /* STATS */ | |
| #define LWIP_PROVIDE_ERRNO 1 | |
| #endif /* __LWIPOPTS_H__ */ |