FreeRTOS/Demo/MicroBlaze_Spartan-6_EthernetLite/KernelAwareBSPRepository/bsp/freertos_v2_00_a/data/freertos_v2_1_0.mld - nest-detect/1.2/freertos - Git at Google

 ##############################################################################
 #
 # (c) Copyright 2011 Xilinx, Inc. All rights reserved.
 #
 # This file contains confidential and proprietary information of Xilinx, Inc.
 # and is protected under U.S. and international copyright and other
 # intellectual property laws.
 #
 # DISCLAIMER
 # This disclaimer is not a license and does not grant any rights to the
 # materials distributed herewith. Except as otherwise provided in a valid
 # license issued to you by Xilinx, and to the maximum extent permitted by
 # applicable law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND WITH ALL
 # FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES AND CONDITIONS, EXPRESS,
 # IMPLIED, OR STATUTORY, INCLUDING BUT NOT LIMITED TO WARRANTIES OF
 # MERCHANTABILITY, NON-INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE;
 # and (2) Xilinx shall not be liable (whether in contract or tort, including
 # negligence, or under any other theory of liability) for any loss or damage
 # of any kind or nature related to, arising under or in connection with these
 # materials, including for any direct, or any indirect, special, incidental,
 # or consequential loss or damage (including loss of data, profits, goodwill,
 # or any type of loss or damage suffered as a result of any action brought by
 # a third party) even if such damage or loss was reasonably foreseeable or
 # Xilinx had been advised of the possibility of the same.
 #
 # CRITICAL APPLICATIONS
 # Xilinx products are not designed or intended to be fail-safe, or for use in
 # any application requiring fail-safe performance, such as life-support or
 # safety devices or systems, Class III medical devices, nuclear facilities,
 # applications related to the deployment of airbags, or any other applications
 # that could lead to death, personal injury, or severe property or
 # environmental damage (individually and collectively, "Critical
 # Applications"). Customer assumes the sole risk and liability of any use of
 # Xilinx products in Critical Applications, subject only to applicable laws
 # and regulations governing limitations on product liability.
 #
 # THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS PART OF THIS FILE
 # AT ALL TIMES.
 #
 # This file is part of Xilkernel.
 #
 # $Id: xilkernel_v2_1_0.mld,v 1.1.2.4 2010/12/10 07:27:08 svemula Exp $
 ###############################################################################

 OPTION psf_version = 2.1.0 ;
 BEGIN OS freertos

   OPTION DRC = kernel_drc ;
   OPTION SUPPORTED_PERIPHERALS = (microblaze);
   OPTION COPYFILES = all;
   OPTION DEPENDS = (standalone_v3_01_a);
   OPTION APP_LINKER_FLAGS = "-Wl,--start-group,-lxil,-lfreertos,-lgcc,-lc,--end-group";

   OPTION DESC = "FreeRTOS is a popular lightweight kernel."

   # STDIN/STDOUT
   PARAM name = stdin, type = peripheral_instance, requires_interface = stdin, default=none, desc = "Specify the instance name of the standard input peripheral";
   PARAM name = stdout, type = peripheral_instance, requires_interface = stdout, default=none, desc = "Specify the instance name of the standard output peripheral";

   # System timer specification
   PARAM name = systmr_interval, type = int, default = 10, desc = "Specify the frequency of the kernel tick (in Hz).";

   # System interrupt controller specification
   # PARAM name = sysintc_spec, type = peripheral_instance, range = (opb_intc, xps_intc, dcr_intc, axi_intc), default = none, desc = "Specify the instance name of the interrupt controller device driving system interrupts";

   BEGIN CATEGORY kernel_behavior
     PARAM name = kernel_behavior, type = bool, default = true, desc = "Parameters relating to the kernel behavior", permit = user;
     PARAM name = use_preemption, type = bool, default = true, desc = "Set to true to use the preemptive scheduler, or false to use the cooperative scheduler.";
     PARAM name = idle_yield, type = bool, default = true, desc = "Set to true if the Idle task should yield if another idle priority task is able to run, or false if the idle task should always use its entire time slice unless it is preempted.";
     PARAM name = max_priorities, type = int, default = 4, desc = "The number of task priorities that will be available.  Priorities can be assigned from zero to (max_priorities - 1)";
     PARAM name = minimal_stack_size, type = int, default = 120, desc = "The size of the stack allocated to the Idle task. Also used by standard demo and test tasks found in the main FreeRTOS download.";
     PARAM name = total_heap_size, type = int, default = 65536, desc = "Only used if heap_1.c or heap_2.c is included in the project.  Sets the amount of RAM reserved for use by the kernel - used when tasks, queues and semaphores are created.";
     PARAM name = max_task_name_len, type = int, default = 8, desc = "The maximum number of characters that can be in the name of a task.";
   END CATEGORY

   BEGIN CATEGORY kernel_features
 	PARAM name = kernel_features, type = bool, default = true, desc = "Include or exclude kernel features", permit = user;
 	PARAM name = use_mutexes, type = bool, default = true, desc = "Set to true to include mutex functionality, or false to exclude mutex functionality.";
 	PARAM name = use_recursive_mutexes, type = bool, default = true, desc = "Set to true to include recursive mutex functionality, or false to exclude recursive mutex functionality.";
 	PARAM name = use_counting_semaphores, type = bool, default = true, desc = "Set to true to include counting semaphore functionality, or false to exclude recursive mutex functionality.";
 	PARAM name = queue_registry_size, type = int, default = 10, desc = "The maximum number of queues that can be registered at any one time. Registered queues can be viewed in the kernel aware debugger plug-in.";
 	PARAM name = use_trace_facility, type = bool, default = true, desc = "Set to true to include the legacy trace functionality, and a few other features.  traceMACROS are the preferred method of tracing now.";
   END CATEGORY

   BEGIN CATEGORY hook_functions
 	PARAM name = hook_functions, type = bool, default = true, desc = "Include or exclude application defined hook (callback) functions.  Callback functions must be defined by the application that is using FreeRTOS", permit = user;
     PARAM name = use_idle_hook, type = bool, default = false, desc = "Set to true for the kernel to call vApplicationIdleHook() on each iteration of the idle task.  The application must provide an implementation of vApplicationIdleHook().";
     PARAM name = use_tick_hook, type = bool, default = false, desc = "Set to true for the kernel to call vApplicationTickHook() during each tick interrupt.  The application must provide an implementation of vApplicationTickHook().";
 	PARAM name = use_malloc_failed_hook, type = bool, default = true, desc = "Only used if heap_1.c, heap_2.c or heap_3.c is included in the project.  Set to true for the kernel to call vApplicationMallocFailedHookHook() if there is insufficient FreeRTOS heap available for a task, queue or semaphore to be created.  The application must provide an implementation of vApplicationMallocFailedHook().";
 	PARAM name = check_for_stack_overflow, type = int, default = 2, desc = "Set to 1 to include basic run time task stack checking.  Set to 2 to include more comprehensive run time task stack checking.";
   END CATEGORY

   BEGIN CATEGORY software_timers
 	PARAM name = software_timers, type = bool, default = true, desc = "Options relating to the software timers functionality", permit = user;
 	PARAM name = use_timers, type = bool, default = true, desc = "Set to true to include software timer functionality, or false to exclude software timer functionality";
 	PARAM name = timer_task_priority, type = string, default = "(configMAX_PRIORITIES - 1)", desc = "The priority at which the software timer service/daemon task will execute.";
 	PARAM name = timer_command_queue_length, type = int, default = 10, desc = "The number of commands the timer command queue can hold at any one time.";
 	PARAM name = timer_task_stack_depth, type = string, default = "(configMINIMAL_STACK_SIZE), desc = "The size of the stack allocated to the timer service/daemon task.";
   END CATEGORY

 END OS
	##############################################################################
	#
	# (c) Copyright 2011 Xilinx, Inc. All rights reserved.
	#
	# This file contains confidential and proprietary information of Xilinx, Inc.
	# and is protected under U.S. and international copyright and other
	# intellectual property laws.
	#
	# DISCLAIMER
	# This disclaimer is not a license and does not grant any rights to the
	# materials distributed herewith. Except as otherwise provided in a valid
	# license issued to you by Xilinx, and to the maximum extent permitted by
	# applicable law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND WITH ALL
	# FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES AND CONDITIONS, EXPRESS,
	# IMPLIED, OR STATUTORY, INCLUDING BUT NOT LIMITED TO WARRANTIES OF
	# MERCHANTABILITY, NON-INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE;
	# and (2) Xilinx shall not be liable (whether in contract or tort, including
	# negligence, or under any other theory of liability) for any loss or damage
	# of any kind or nature related to, arising under or in connection with these
	# materials, including for any direct, or any indirect, special, incidental,
	# or consequential loss or damage (including loss of data, profits, goodwill,
	# or any type of loss or damage suffered as a result of any action brought by
	# a third party) even if such damage or loss was reasonably foreseeable or
	# Xilinx had been advised of the possibility of the same.
	#
	# CRITICAL APPLICATIONS
	# Xilinx products are not designed or intended to be fail-safe, or for use in
	# any application requiring fail-safe performance, such as life-support or
	# safety devices or systems, Class III medical devices, nuclear facilities,
	# applications related to the deployment of airbags, or any other applications
	# that could lead to death, personal injury, or severe property or
	# environmental damage (individually and collectively, "Critical
	# Applications"). Customer assumes the sole risk and liability of any use of
	# Xilinx products in Critical Applications, subject only to applicable laws
	# and regulations governing limitations on product liability.
	#
	# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS PART OF THIS FILE
	# AT ALL TIMES.
	#
	# This file is part of Xilkernel.
	#
	# $Id: xilkernel_v2_1_0.mld,v 1.1.2.4 2010/12/10 07:27:08 svemula Exp $
	###############################################################################

	OPTION psf_version = 2.1.0 ;
	BEGIN OS freertos

	OPTION DRC = kernel_drc ;
	OPTION SUPPORTED_PERIPHERALS = (microblaze);
	OPTION COPYFILES = all;
	OPTION DEPENDS = (standalone_v3_01_a);
	OPTION APP_LINKER_FLAGS = "-Wl,--start-group,-lxil,-lfreertos,-lgcc,-lc,--end-group";

	OPTION DESC = "FreeRTOS is a popular lightweight kernel."

	# STDIN/STDOUT
	PARAM name = stdin, type = peripheral_instance, requires_interface = stdin, default=none, desc = "Specify the instance name of the standard input peripheral";
	PARAM name = stdout, type = peripheral_instance, requires_interface = stdout, default=none, desc = "Specify the instance name of the standard output peripheral";

	# System timer specification
	PARAM name = systmr_interval, type = int, default = 10, desc = "Specify the frequency of the kernel tick (in Hz).";

	# System interrupt controller specification
	# PARAM name = sysintc_spec, type = peripheral_instance, range = (opb_intc, xps_intc, dcr_intc, axi_intc), default = none, desc = "Specify the instance name of the interrupt controller device driving system interrupts";

	BEGIN CATEGORY kernel_behavior
	PARAM name = kernel_behavior, type = bool, default = true, desc = "Parameters relating to the kernel behavior", permit = user;
	PARAM name = use_preemption, type = bool, default = true, desc = "Set to true to use the preemptive scheduler, or false to use the cooperative scheduler.";
	PARAM name = idle_yield, type = bool, default = true, desc = "Set to true if the Idle task should yield if another idle priority task is able to run, or false if the idle task should always use its entire time slice unless it is preempted.";
	PARAM name = max_priorities, type = int, default = 4, desc = "The number of task priorities that will be available. Priorities can be assigned from zero to (max_priorities - 1)";
	PARAM name = minimal_stack_size, type = int, default = 120, desc = "The size of the stack allocated to the Idle task. Also used by standard demo and test tasks found in the main FreeRTOS download.";
	PARAM name = total_heap_size, type = int, default = 65536, desc = "Only used if heap_1.c or heap_2.c is included in the project. Sets the amount of RAM reserved for use by the kernel - used when tasks, queues and semaphores are created.";
	PARAM name = max_task_name_len, type = int, default = 8, desc = "The maximum number of characters that can be in the name of a task.";
	END CATEGORY

	BEGIN CATEGORY kernel_features
	PARAM name = kernel_features, type = bool, default = true, desc = "Include or exclude kernel features", permit = user;
	PARAM name = use_mutexes, type = bool, default = true, desc = "Set to true to include mutex functionality, or false to exclude mutex functionality.";
	PARAM name = use_recursive_mutexes, type = bool, default = true, desc = "Set to true to include recursive mutex functionality, or false to exclude recursive mutex functionality.";
	PARAM name = use_counting_semaphores, type = bool, default = true, desc = "Set to true to include counting semaphore functionality, or false to exclude recursive mutex functionality.";
	PARAM name = queue_registry_size, type = int, default = 10, desc = "The maximum number of queues that can be registered at any one time. Registered queues can be viewed in the kernel aware debugger plug-in.";
	PARAM name = use_trace_facility, type = bool, default = true, desc = "Set to true to include the legacy trace functionality, and a few other features. traceMACROS are the preferred method of tracing now.";
	END CATEGORY

	BEGIN CATEGORY hook_functions
	PARAM name = hook_functions, type = bool, default = true, desc = "Include or exclude application defined hook (callback) functions. Callback functions must be defined by the application that is using FreeRTOS", permit = user;
	PARAM name = use_idle_hook, type = bool, default = false, desc = "Set to true for the kernel to call vApplicationIdleHook() on each iteration of the idle task. The application must provide an implementation of vApplicationIdleHook().";
	PARAM name = use_tick_hook, type = bool, default = false, desc = "Set to true for the kernel to call vApplicationTickHook() during each tick interrupt. The application must provide an implementation of vApplicationTickHook().";
	PARAM name = use_malloc_failed_hook, type = bool, default = true, desc = "Only used if heap_1.c, heap_2.c or heap_3.c is included in the project. Set to true for the kernel to call vApplicationMallocFailedHookHook() if there is insufficient FreeRTOS heap available for a task, queue or semaphore to be created. The application must provide an implementation of vApplicationMallocFailedHook().";
	PARAM name = check_for_stack_overflow, type = int, default = 2, desc = "Set to 1 to include basic run time task stack checking. Set to 2 to include more comprehensive run time task stack checking.";
	END CATEGORY

	BEGIN CATEGORY software_timers
	PARAM name = software_timers, type = bool, default = true, desc = "Options relating to the software timers functionality", permit = user;
	PARAM name = use_timers, type = bool, default = true, desc = "Set to true to include software timer functionality, or false to exclude software timer functionality";
	PARAM name = timer_task_priority, type = string, default = "(configMAX_PRIORITIES - 1)", desc = "The priority at which the software timer service/daemon task will execute.";
	PARAM name = timer_command_queue_length, type = int, default = 10, desc = "The number of commands the timer command queue can hold at any one time.";
	PARAM name = timer_task_stack_depth, type = string, default = "(configMINIMAL_STACK_SIZE), desc = "The size of the stack allocated to the timer service/daemon task.";
	END CATEGORY

	END OS