| /** | |
| * \file | |
| * | |
| * \brief Instance description for EIC | |
| * | |
| * Copyright (c) 2013 Atmel Corporation. All rights reserved. | |
| * | |
| * \asf_license_start | |
| * | |
| * \page License | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions are met: | |
| * | |
| * 1. Redistributions of source code must retain the above copyright notice, | |
| * this list of conditions and the following disclaimer. | |
| * | |
| * 2. Redistributions in binary form must reproduce the above copyright notice, | |
| * this list of conditions and the following disclaimer in the documentation | |
| * and/or other materials provided with the distribution. | |
| * | |
| * 3. The name of Atmel may not be used to endorse or promote products derived | |
| * from this software without specific prior written permission. | |
| * | |
| * 4. This software may only be redistributed and used in connection with an | |
| * Atmel microcontroller product. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED | |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF | |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE | |
| * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR | |
| * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN | |
| * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | |
| * POSSIBILITY OF SUCH DAMAGE. | |
| * | |
| * \asf_license_stop | |
| * | |
| */ | |
| #ifndef _SAMD20_EIC_INSTANCE_ | |
| #define _SAMD20_EIC_INSTANCE_ | |
| /* ========== Register definition for EIC peripheral ========== */ | |
| #if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) | |
| #define REG_EIC_CTRL (0x40001800U) /**< \brief (EIC) Control Register */ | |
| #define REG_EIC_STATUS (0x40001801U) /**< \brief (EIC) Status Register */ | |
| #define REG_EIC_NMICTRL (0x40001802U) /**< \brief (EIC) NMI Control Register */ | |
| #define REG_EIC_NMIFLAG (0x40001803U) /**< \brief (EIC) NMI Interrupt Flag Register */ | |
| #define REG_EIC_EVCTRL (0x40001804U) /**< \brief (EIC) Event Control Register */ | |
| #define REG_EIC_INTENCLR (0x40001808U) /**< \brief (EIC) Interrupt Enable Clear Register */ | |
| #define REG_EIC_INTENSET (0x4000180CU) /**< \brief (EIC) Interrupt Enable Set Register */ | |
| #define REG_EIC_INTFLAG (0x40001810U) /**< \brief (EIC) Interrupt Flag Status and Clear Register */ | |
| #define REG_EIC_WAKEUP (0x40001814U) /**< \brief (EIC) Wake-up Enable Register */ | |
| #define REG_EIC_CONFIG0 (0x40001818U) /**< \brief (EIC) Config Register 0 */ | |
| #define REG_EIC_CONFIG1 (0x4000181CU) /**< \brief (EIC) Config Register 1 */ | |
| #else | |
| #define REG_EIC_CTRL (*(RwReg8 *)0x40001800U) /**< \brief (EIC) Control Register */ | |
| #define REG_EIC_STATUS (*(RoReg8 *)0x40001801U) /**< \brief (EIC) Status Register */ | |
| #define REG_EIC_NMICTRL (*(RwReg8 *)0x40001802U) /**< \brief (EIC) NMI Control Register */ | |
| #define REG_EIC_NMIFLAG (*(RwReg8 *)0x40001803U) /**< \brief (EIC) NMI Interrupt Flag Register */ | |
| #define REG_EIC_EVCTRL (*(RwReg *)0x40001804U) /**< \brief (EIC) Event Control Register */ | |
| #define REG_EIC_INTENCLR (*(RwReg *)0x40001808U) /**< \brief (EIC) Interrupt Enable Clear Register */ | |
| #define REG_EIC_INTENSET (*(RwReg *)0x4000180CU) /**< \brief (EIC) Interrupt Enable Set Register */ | |
| #define REG_EIC_INTFLAG (*(RwReg *)0x40001810U) /**< \brief (EIC) Interrupt Flag Status and Clear Register */ | |
| #define REG_EIC_WAKEUP (*(RwReg *)0x40001814U) /**< \brief (EIC) Wake-up Enable Register */ | |
| #define REG_EIC_CONFIG0 (*(RwReg *)0x40001818U) /**< \brief (EIC) Config Register 0 */ | |
| #define REG_EIC_CONFIG1 (*(RwReg *)0x4000181CU) /**< \brief (EIC) Config Register 1 */ | |
| #endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ | |
| /* ========== Instance parameters for EIC peripheral ========== */ | |
| #define EIC_GCLK_ID 3 | |
| #define EIC_NMI_NO_DETECT_ALLOWED 0 | |
| #define EIC_NUMBER_OF_CONFIG_REGS 2 | |
| #define EIC_NUMBER_OF_INTERRUPTS 16 | |
| #endif /* _SAMD20_EIC_INSTANCE_ */ |