<?xml version="1.0" encoding="iso-8859-1"?> | |
<project> | |
<fileVersion>2</fileVersion> | |
<configuration> | |
<name>AT91SAM9XE512_SDRAM_ARM</name> | |
<toolchain> | |
<name>ARM</name> | |
</toolchain> | |
<debug>1</debug> | |
<settings> | |
<name>General</name> | |
<archiveVersion>3</archiveVersion> | |
<data> | |
<version>17</version> | |
<wantNonLocal>1</wantNonLocal> | |
<debug>1</debug> | |
<option> | |
<name>ExePath</name> | |
<state>AT91SAM9XE512_SDRAM_ARM\Exe</state> | |
</option> | |
<option> | |
<name>ObjPath</name> | |
<state>AT91SAM9XE512_SDRAM_ARM\Obj</state> | |
</option> | |
<option> | |
<name>ListPath</name> | |
<state>AT91SAM9XE512_SDRAM_ARM\List</state> | |
</option> | |
<option> | |
<name>Variant</name> | |
<version>11</version> | |
<state>12</state> | |
</option> | |
<option> | |
<name>GEndianMode</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>Input variant</name> | |
<version>1</version> | |
<state>3</state> | |
</option> | |
<option> | |
<name>Input description</name> | |
<state>No specifier n, no float nor long long, no scan set, no assignment suppressing.</state> | |
</option> | |
<option> | |
<name>Output variant</name> | |
<version>0</version> | |
<state>2</state> | |
</option> | |
<option> | |
<name>Output description</name> | |
<state>No specifier a, A, no specifier n, no float nor long long.</state> | |
</option> | |
<option> | |
<name>GOutputBinary</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>FPU</name> | |
<version>0</version> | |
<state>0</state> | |
</option> | |
<option> | |
<name>OGCoreOrChip</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>GRuntimeLibSelect</name> | |
<version>0</version> | |
<state>2</state> | |
</option> | |
<option> | |
<name>GRuntimeLibSelectSlave</name> | |
<version>0</version> | |
<state>2</state> | |
</option> | |
<option> | |
<name>RTDescription</name> | |
<state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state> | |
</option> | |
<option> | |
<name>RTConfigPath</name> | |
<state>$TOOLKIT_DIR$\INC\DLib_Config_Full.h</state> | |
</option> | |
<option> | |
<name>OGProductVersion</name> | |
<state>4.30A</state> | |
</option> | |
<option> | |
<name>OGLastSavedByProductVersion</name> | |
<state>5.30.0.51160</state> | |
</option> | |
<option> | |
<name>GeneralEnableMisra</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>GeneralMisraVerbose</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>OGChipSelectEditMenu</name> | |
<state>at91sam9xe512 Atmel at91sam9xe512</state> | |
</option> | |
<option> | |
<name>GenLowLevelInterface</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>GEndianModeBE</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>OGBufferedTerminalOutput</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>GenStdoutInterface</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>GeneralMisraRules98</name> | |
<version>0</version> | |
<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state> | |
</option> | |
<option> | |
<name>GeneralMisraVer</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>GeneralMisraRules04</name> | |
<version>0</version> | |
<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state> | |
</option> | |
</data> | |
</settings> | |
<settings> | |
<name>ICCARM</name> | |
<archiveVersion>2</archiveVersion> | |
<data> | |
<version>21</version> | |
<wantNonLocal>1</wantNonLocal> | |
<debug>1</debug> | |
<option> | |
<name>CCDefines</name> | |
<state>at91sam9xe128</state> | |
<state>flash</state> | |
<state>SAM9XE_IAR</state> | |
</option> | |
<option> | |
<name>CCPreprocFile</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>CCPreprocComments</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>CCPreprocLine</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>CCListCFile</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>CCListCMnemonics</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>CCListCMessages</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>CCListAssFile</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>CCListAssSource</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>CCEnableRemarks</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>CCDiagSuppress</name> | |
<state>Pe826,Pe1375,Pa082</state> | |
</option> | |
<option> | |
<name>CCDiagRemark</name> | |
<state></state> | |
</option> | |
<option> | |
<name>CCDiagWarning</name> | |
<state></state> | |
</option> | |
<option> | |
<name>CCDiagError</name> | |
<state></state> | |
</option> | |
<option> | |
<name>CCObjPrefix</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>CCAllowList</name> | |
<version>1</version> | |
<state>0000000</state> | |
</option> | |
<option> | |
<name>CCDebugInfo</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>IEndianMode</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>IProcessor</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>IExtraOptionsCheck</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>IExtraOptions</name> | |
<state></state> | |
</option> | |
<option> | |
<name>CCLangConformance</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>CCSignedPlainChar</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>CCRequirePrototypes</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>CCMultibyteSupport</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>CCDiagWarnAreErr</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>CCCompilerRuntimeInfo</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>IFpuProcessor</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>OutputFile</name> | |
<state>$FILE_BNAME$.o</state> | |
</option> | |
<option> | |
<name>CCLangSelect</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>CCLibConfigHeader</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>PreInclude</name> | |
<state></state> | |
</option> | |
<option> | |
<name>CompilerMisraOverride</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>CCIncludePath2</name> | |
<state>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib</state> | |
<state>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek</state> | |
<state>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals</state> | |
<state>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\components</state> | |
<state>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\utility</state> | |
<state>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\usb</state> | |
<state>$PROJ_DIR$\..\..\..\Source\include</state> | |
<state>$PROJ_DIR$\..</state> | |
<state>$PROJ_DIR$\..\..\Common\include</state> | |
</option> | |
<option> | |
<name>CCStdIncCheck</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>CCStdIncludePath</name> | |
<state>$TOOLKIT_DIR$\INC\</state> | |
</option> | |
<option> | |
<name>CCCodeSection</name> | |
<state>.text</state> | |
</option> | |
<option> | |
<name>IInterwork2</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>IProcessorMode2</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>CCOptLevel</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>CCOptStrategy</name> | |
<version>0</version> | |
<state>0</state> | |
</option> | |
<option> | |
<name>CCOptLevelSlave</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>CompilerMisraRules98</name> | |
<version>0</version> | |
<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state> | |
</option> | |
<option> | |
<name>CompilerMisraRules04</name> | |
<version>0</version> | |
<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state> | |
</option> | |
</data> | |
</settings> | |
<settings> | |
<name>AARM</name> | |
<archiveVersion>2</archiveVersion> | |
<data> | |
<version>7</version> | |
<wantNonLocal>1</wantNonLocal> | |
<debug>1</debug> | |
<option> | |
<name>AObjPrefix</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>AEndian</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>ACaseSensitivity</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>MacroChars</name> | |
<version>0</version> | |
<state>0</state> | |
</option> | |
<option> | |
<name>AWarnEnable</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>AWarnWhat</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>AWarnOne</name> | |
<state></state> | |
</option> | |
<option> | |
<name>AWarnRange1</name> | |
<state></state> | |
</option> | |
<option> | |
<name>AWarnRange2</name> | |
<state></state> | |
</option> | |
<option> | |
<name>ADebug</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>AltRegisterNames</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>ADefines</name> | |
<state>at91sam9xe512</state> | |
<state>sdram</state> | |
</option> | |
<option> | |
<name>AList</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>AListHeader</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>AListing</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>Includes</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>MacDefs</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>MacExps</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>MacExec</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>OnlyAssed</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>MultiLine</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>PageLengthCheck</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>PageLength</name> | |
<state>80</state> | |
</option> | |
<option> | |
<name>TabSpacing</name> | |
<state>8</state> | |
</option> | |
<option> | |
<name>AXRef</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>AXRefDefines</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>AXRefInternal</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>AXRefDual</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>AProcessor</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>AFpuProcessor</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>AOutputFile</name> | |
<state>$FILE_BNAME$.o</state> | |
</option> | |
<option> | |
<name>AMultibyteSupport</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>ALimitErrorsCheck</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>ALimitErrorsEdit</name> | |
<state>100</state> | |
</option> | |
<option> | |
<name>AIgnoreStdInclude</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>AStdIncludes</name> | |
<state>$TOOLKIT_DIR$\INC\</state> | |
</option> | |
<option> | |
<name>AUserIncludes</name> | |
<state>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib</state> | |
<state>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals</state> | |
<state>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek</state> | |
<state>$PROJ_DIR$\..\..\..\Source\portable\IAR\AtmelSAM9XE</state> | |
</option> | |
<option> | |
<name>AExtraOptionsCheckV2</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>AExtraOptionsV2</name> | |
<state></state> | |
</option> | |
</data> | |
</settings> | |
<settings> | |
<name>OBJCOPY</name> | |
<archiveVersion>0</archiveVersion> | |
<data> | |
<version>1</version> | |
<wantNonLocal>1</wantNonLocal> | |
<debug>1</debug> | |
<option> | |
<name>OOCOutputFormat</name> | |
<version>2</version> | |
<state>2</state> | |
</option> | |
<option> | |
<name>OCOutputOverride</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>OOCOutputFile</name> | |
<state>at91sam9xe512_sdram.bin</state> | |
</option> | |
<option> | |
<name>OOCCommandLineProducer</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>OOCObjCopyEnable</name> | |
<state>1</state> | |
</option> | |
</data> | |
</settings> | |
<settings> | |
<name>CUSTOM</name> | |
<archiveVersion>3</archiveVersion> | |
<data> | |
<extensions></extensions> | |
<cmdline></cmdline> | |
</data> | |
</settings> | |
<settings> | |
<name>BICOMP</name> | |
<archiveVersion>0</archiveVersion> | |
<data/> | |
</settings> | |
<settings> | |
<name>BUILDACTION</name> | |
<archiveVersion>1</archiveVersion> | |
<data> | |
<prebuild></prebuild> | |
<postbuild></postbuild> | |
</data> | |
</settings> | |
<settings> | |
<name>ILINK</name> | |
<archiveVersion>0</archiveVersion> | |
<data> | |
<version>8</version> | |
<wantNonLocal>1</wantNonLocal> | |
<debug>1</debug> | |
<option> | |
<name>IlinkLibIOConfig</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>XLinkMisraHandler</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>IlinkInputFileSlave</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>IlinkOutputFile</name> | |
<state>at91sam9xe512_sdram.out</state> | |
</option> | |
<option> | |
<name>IlinkDebugInfoEnable</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>IlinkKeepSymbols</name> | |
<state></state> | |
</option> | |
<option> | |
<name>IlinkRawBinaryFile</name> | |
<state></state> | |
</option> | |
<option> | |
<name>IlinkRawBinarySymbol</name> | |
<state></state> | |
</option> | |
<option> | |
<name>IlinkRawBinarySegment</name> | |
<state></state> | |
</option> | |
<option> | |
<name>IlinkRawBinaryAlign</name> | |
<state></state> | |
</option> | |
<option> | |
<name>IlinkDefines</name> | |
<state></state> | |
</option> | |
<option> | |
<name>IlinkConfigDefines</name> | |
<state></state> | |
</option> | |
<option> | |
<name>IlinkMapFile</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>IlinkLogFile</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>IlinkLogInitialization</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>IlinkLogModule</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>IlinkLogSection</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>IlinkLogVeneer</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>IlinkIcfOverride</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>IlinkIcfFile</name> | |
<state>$PROJ_DIR$\sdram.icf</state> | |
</option> | |
<option> | |
<name>IlinkIcfFileSlave</name> | |
<state></state> | |
</option> | |
<option> | |
<name>IlinkEnableRemarks</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>IlinkSuppressDiags</name> | |
<state>Lp005,Lp006</state> | |
</option> | |
<option> | |
<name>IlinkTreatAsRem</name> | |
<state></state> | |
</option> | |
<option> | |
<name>IlinkTreatAsWarn</name> | |
<state></state> | |
</option> | |
<option> | |
<name>IlinkTreatAsErr</name> | |
<state></state> | |
</option> | |
<option> | |
<name>IlinkWarningsAreErrors</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>IlinkUseExtraOptions</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>IlinkExtraOptions</name> | |
<state></state> | |
</option> | |
<option> | |
<name>IlinkLowLevelInterfaceSlave</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>IlinkAutoLibEnable</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>IlinkAdditionalLibs</name> | |
<state></state> | |
</option> | |
<option> | |
<name>IlinkOverrideProgramEntryLabel</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>IlinkProgramEntryLabelSelect</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>IlinkProgramEntryLabel</name> | |
<state>resetHandler</state> | |
</option> | |
<option> | |
<name>DoFill</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>FillerByte</name> | |
<state>0xFF</state> | |
</option> | |
<option> | |
<name>FillerStart</name> | |
<state>0x0</state> | |
</option> | |
<option> | |
<name>FillerEnd</name> | |
<state>0x0</state> | |
</option> | |
<option> | |
<name>CrcSize</name> | |
<version>0</version> | |
<state>1</state> | |
</option> | |
<option> | |
<name>CrcAlign</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>CrcAlgo</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>CrcPoly</name> | |
<state>0x11021</state> | |
</option> | |
<option> | |
<name>CrcCompl</name> | |
<version>0</version> | |
<state>0</state> | |
</option> | |
<option> | |
<name>CrcBitOrder</name> | |
<version>0</version> | |
<state>0</state> | |
</option> | |
<option> | |
<name>CrcInitialValue</name> | |
<state>0x0</state> | |
</option> | |
<option> | |
<name>DoCrc</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>IlinkBE8Slave</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>IlinkBufferedTerminalOutput</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>IlinkStdoutInterfaceSlave</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>CrcFullSize</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>IlinkIElfToolPostProcess</name> | |
<state>0</state> | |
</option> | |
</data> | |
</settings> | |
<settings> | |
<name>IARCHIVE</name> | |
<archiveVersion>0</archiveVersion> | |
<data> | |
<version>0</version> | |
<wantNonLocal>1</wantNonLocal> | |
<debug>1</debug> | |
<option> | |
<name>IarchiveInputs</name> | |
<state></state> | |
</option> | |
<option> | |
<name>IarchiveOverride</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>IarchiveOutput</name> | |
<state>###Unitialized###</state> | |
</option> | |
</data> | |
</settings> | |
<settings> | |
<name>BILINK</name> | |
<archiveVersion>0</archiveVersion> | |
<data/> | |
</settings> | |
</configuration> | |
<configuration> | |
<name>AT91SAM9XE512_SDRAM_THUMB</name> | |
<toolchain> | |
<name>ARM</name> | |
</toolchain> | |
<debug>1</debug> | |
<settings> | |
<name>General</name> | |
<archiveVersion>3</archiveVersion> | |
<data> | |
<version>17</version> | |
<wantNonLocal>1</wantNonLocal> | |
<debug>1</debug> | |
<option> | |
<name>ExePath</name> | |
<state>AT91SAM9XE512_SDRAM_THUMB\Exe</state> | |
</option> | |
<option> | |
<name>ObjPath</name> | |
<state>AT91SAM9XE512_SDRAM_THUMB\Obj</state> | |
</option> | |
<option> | |
<name>ListPath</name> | |
<state>AT91SAM9XE512_SDRAM_THUMB\List</state> | |
</option> | |
<option> | |
<name>Variant</name> | |
<version>11</version> | |
<state>12</state> | |
</option> | |
<option> | |
<name>GEndianMode</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>Input variant</name> | |
<version>1</version> | |
<state>3</state> | |
</option> | |
<option> | |
<name>Input description</name> | |
<state>No specifier n, no float nor long long, no scan set, no assignment suppressing.</state> | |
</option> | |
<option> | |
<name>Output variant</name> | |
<version>0</version> | |
<state>2</state> | |
</option> | |
<option> | |
<name>Output description</name> | |
<state>No specifier a, A, no specifier n, no float nor long long.</state> | |
</option> | |
<option> | |
<name>GOutputBinary</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>FPU</name> | |
<version>0</version> | |
<state>0</state> | |
</option> | |
<option> | |
<name>OGCoreOrChip</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>GRuntimeLibSelect</name> | |
<version>0</version> | |
<state>2</state> | |
</option> | |
<option> | |
<name>GRuntimeLibSelectSlave</name> | |
<version>0</version> | |
<state>2</state> | |
</option> | |
<option> | |
<name>RTDescription</name> | |
<state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state> | |
</option> | |
<option> | |
<name>RTConfigPath</name> | |
<state>$TOOLKIT_DIR$\INC\DLib_Config_Full.h</state> | |
</option> | |
<option> | |
<name>OGProductVersion</name> | |
<state>4.30A</state> | |
</option> | |
<option> | |
<name>OGLastSavedByProductVersion</name> | |
<state>5.30.0.51236</state> | |
</option> | |
<option> | |
<name>GeneralEnableMisra</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>GeneralMisraVerbose</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>OGChipSelectEditMenu</name> | |
<state>at91sam9xe512 Atmel at91sam9xe512</state> | |
</option> | |
<option> | |
<name>GenLowLevelInterface</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>GEndianModeBE</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>OGBufferedTerminalOutput</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>GenStdoutInterface</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>GeneralMisraRules98</name> | |
<version>0</version> | |
<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state> | |
</option> | |
<option> | |
<name>GeneralMisraVer</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>GeneralMisraRules04</name> | |
<version>0</version> | |
<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state> | |
</option> | |
</data> | |
</settings> | |
<settings> | |
<name>ICCARM</name> | |
<archiveVersion>2</archiveVersion> | |
<data> | |
<version>21</version> | |
<wantNonLocal>1</wantNonLocal> | |
<debug>1</debug> | |
<option> | |
<name>CCDefines</name> | |
<state>at91sam9xe128</state> | |
<state>flash</state> | |
<state>SAM9XE_IAR</state> | |
<state>THUMB_INTERWORK</state> | |
</option> | |
<option> | |
<name>CCPreprocFile</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>CCPreprocComments</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>CCPreprocLine</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>CCListCFile</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>CCListCMnemonics</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>CCListCMessages</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>CCListAssFile</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>CCListAssSource</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>CCEnableRemarks</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>CCDiagSuppress</name> | |
<state>Pe826,Pe1375,Pa082</state> | |
</option> | |
<option> | |
<name>CCDiagRemark</name> | |
<state></state> | |
</option> | |
<option> | |
<name>CCDiagWarning</name> | |
<state></state> | |
</option> | |
<option> | |
<name>CCDiagError</name> | |
<state></state> | |
</option> | |
<option> | |
<name>CCObjPrefix</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>CCAllowList</name> | |
<version>1</version> | |
<state>0000000</state> | |
</option> | |
<option> | |
<name>CCDebugInfo</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>IEndianMode</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>IProcessor</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>IExtraOptionsCheck</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>IExtraOptions</name> | |
<state></state> | |
</option> | |
<option> | |
<name>CCLangConformance</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>CCSignedPlainChar</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>CCRequirePrototypes</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>CCMultibyteSupport</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>CCDiagWarnAreErr</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>CCCompilerRuntimeInfo</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>IFpuProcessor</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>OutputFile</name> | |
<state>$FILE_BNAME$.o</state> | |
</option> | |
<option> | |
<name>CCLangSelect</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>CCLibConfigHeader</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>PreInclude</name> | |
<state></state> | |
</option> | |
<option> | |
<name>CompilerMisraOverride</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>CCIncludePath2</name> | |
<state>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib</state> | |
<state>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek</state> | |
<state>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals</state> | |
<state>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\components</state> | |
<state>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\utility</state> | |
<state>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\usb</state> | |
<state>$PROJ_DIR$\..\..\..\Source\include</state> | |
<state>$PROJ_DIR$\..</state> | |
<state>$PROJ_DIR$\..\..\Common\include</state> | |
</option> | |
<option> | |
<name>CCStdIncCheck</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>CCStdIncludePath</name> | |
<state>$TOOLKIT_DIR$\INC\</state> | |
</option> | |
<option> | |
<name>CCCodeSection</name> | |
<state>.text</state> | |
</option> | |
<option> | |
<name>IInterwork2</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>IProcessorMode2</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>CCOptLevel</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>CCOptStrategy</name> | |
<version>0</version> | |
<state>0</state> | |
</option> | |
<option> | |
<name>CCOptLevelSlave</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>CompilerMisraRules98</name> | |
<version>0</version> | |
<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state> | |
</option> | |
<option> | |
<name>CompilerMisraRules04</name> | |
<version>0</version> | |
<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state> | |
</option> | |
</data> | |
</settings> | |
<settings> | |
<name>AARM</name> | |
<archiveVersion>2</archiveVersion> | |
<data> | |
<version>7</version> | |
<wantNonLocal>1</wantNonLocal> | |
<debug>1</debug> | |
<option> | |
<name>AObjPrefix</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>AEndian</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>ACaseSensitivity</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>MacroChars</name> | |
<version>0</version> | |
<state>0</state> | |
</option> | |
<option> | |
<name>AWarnEnable</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>AWarnWhat</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>AWarnOne</name> | |
<state></state> | |
</option> | |
<option> | |
<name>AWarnRange1</name> | |
<state></state> | |
</option> | |
<option> | |
<name>AWarnRange2</name> | |
<state></state> | |
</option> | |
<option> | |
<name>ADebug</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>AltRegisterNames</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>ADefines</name> | |
<state>at91sam9xe512</state> | |
<state>sdram</state> | |
</option> | |
<option> | |
<name>AList</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>AListHeader</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>AListing</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>Includes</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>MacDefs</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>MacExps</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>MacExec</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>OnlyAssed</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>MultiLine</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>PageLengthCheck</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>PageLength</name> | |
<state>80</state> | |
</option> | |
<option> | |
<name>TabSpacing</name> | |
<state>8</state> | |
</option> | |
<option> | |
<name>AXRef</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>AXRefDefines</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>AXRefInternal</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>AXRefDual</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>AProcessor</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>AFpuProcessor</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>AOutputFile</name> | |
<state>$FILE_BNAME$.o</state> | |
</option> | |
<option> | |
<name>AMultibyteSupport</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>ALimitErrorsCheck</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>ALimitErrorsEdit</name> | |
<state>100</state> | |
</option> | |
<option> | |
<name>AIgnoreStdInclude</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>AStdIncludes</name> | |
<state>$TOOLKIT_DIR$\INC\</state> | |
</option> | |
<option> | |
<name>AUserIncludes</name> | |
<state>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib</state> | |
<state>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals</state> | |
<state>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek</state> | |
<state>$PROJ_DIR$\..\..\..\Source\portable\IAR\AtmelSAM9XE</state> | |
</option> | |
<option> | |
<name>AExtraOptionsCheckV2</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>AExtraOptionsV2</name> | |
<state></state> | |
</option> | |
</data> | |
</settings> | |
<settings> | |
<name>OBJCOPY</name> | |
<archiveVersion>0</archiveVersion> | |
<data> | |
<version>1</version> | |
<wantNonLocal>1</wantNonLocal> | |
<debug>1</debug> | |
<option> | |
<name>OOCOutputFormat</name> | |
<version>2</version> | |
<state>2</state> | |
</option> | |
<option> | |
<name>OCOutputOverride</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>OOCOutputFile</name> | |
<state>at91sam9xe512_sdram.bin</state> | |
</option> | |
<option> | |
<name>OOCCommandLineProducer</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>OOCObjCopyEnable</name> | |
<state>1</state> | |
</option> | |
</data> | |
</settings> | |
<settings> | |
<name>CUSTOM</name> | |
<archiveVersion>3</archiveVersion> | |
<data> | |
<extensions></extensions> | |
<cmdline></cmdline> | |
</data> | |
</settings> | |
<settings> | |
<name>BICOMP</name> | |
<archiveVersion>0</archiveVersion> | |
<data/> | |
</settings> | |
<settings> | |
<name>BUILDACTION</name> | |
<archiveVersion>1</archiveVersion> | |
<data> | |
<prebuild></prebuild> | |
<postbuild></postbuild> | |
</data> | |
</settings> | |
<settings> | |
<name>ILINK</name> | |
<archiveVersion>0</archiveVersion> | |
<data> | |
<version>8</version> | |
<wantNonLocal>1</wantNonLocal> | |
<debug>1</debug> | |
<option> | |
<name>IlinkLibIOConfig</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>XLinkMisraHandler</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>IlinkInputFileSlave</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>IlinkOutputFile</name> | |
<state>at91sam9xe512_sdram.out</state> | |
</option> | |
<option> | |
<name>IlinkDebugInfoEnable</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>IlinkKeepSymbols</name> | |
<state></state> | |
</option> | |
<option> | |
<name>IlinkRawBinaryFile</name> | |
<state></state> | |
</option> | |
<option> | |
<name>IlinkRawBinarySymbol</name> | |
<state></state> | |
</option> | |
<option> | |
<name>IlinkRawBinarySegment</name> | |
<state></state> | |
</option> | |
<option> | |
<name>IlinkRawBinaryAlign</name> | |
<state></state> | |
</option> | |
<option> | |
<name>IlinkDefines</name> | |
<state></state> | |
</option> | |
<option> | |
<name>IlinkConfigDefines</name> | |
<state></state> | |
</option> | |
<option> | |
<name>IlinkMapFile</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>IlinkLogFile</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>IlinkLogInitialization</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>IlinkLogModule</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>IlinkLogSection</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>IlinkLogVeneer</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>IlinkIcfOverride</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>IlinkIcfFile</name> | |
<state>$PROJ_DIR$\sdram.icf</state> | |
</option> | |
<option> | |
<name>IlinkIcfFileSlave</name> | |
<state></state> | |
</option> | |
<option> | |
<name>IlinkEnableRemarks</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>IlinkSuppressDiags</name> | |
<state>Lp005,Lp006</state> | |
</option> | |
<option> | |
<name>IlinkTreatAsRem</name> | |
<state></state> | |
</option> | |
<option> | |
<name>IlinkTreatAsWarn</name> | |
<state></state> | |
</option> | |
<option> | |
<name>IlinkTreatAsErr</name> | |
<state></state> | |
</option> | |
<option> | |
<name>IlinkWarningsAreErrors</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>IlinkUseExtraOptions</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>IlinkExtraOptions</name> | |
<state></state> | |
</option> | |
<option> | |
<name>IlinkLowLevelInterfaceSlave</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>IlinkAutoLibEnable</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>IlinkAdditionalLibs</name> | |
<state></state> | |
</option> | |
<option> | |
<name>IlinkOverrideProgramEntryLabel</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>IlinkProgramEntryLabelSelect</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>IlinkProgramEntryLabel</name> | |
<state>resetHandler</state> | |
</option> | |
<option> | |
<name>DoFill</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>FillerByte</name> | |
<state>0xFF</state> | |
</option> | |
<option> | |
<name>FillerStart</name> | |
<state>0x0</state> | |
</option> | |
<option> | |
<name>FillerEnd</name> | |
<state>0x0</state> | |
</option> | |
<option> | |
<name>CrcSize</name> | |
<version>0</version> | |
<state>1</state> | |
</option> | |
<option> | |
<name>CrcAlign</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>CrcAlgo</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>CrcPoly</name> | |
<state>0x11021</state> | |
</option> | |
<option> | |
<name>CrcCompl</name> | |
<version>0</version> | |
<state>0</state> | |
</option> | |
<option> | |
<name>CrcBitOrder</name> | |
<version>0</version> | |
<state>0</state> | |
</option> | |
<option> | |
<name>CrcInitialValue</name> | |
<state>0x0</state> | |
</option> | |
<option> | |
<name>DoCrc</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>IlinkBE8Slave</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>IlinkBufferedTerminalOutput</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>IlinkStdoutInterfaceSlave</name> | |
<state>1</state> | |
</option> | |
<option> | |
<name>CrcFullSize</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>IlinkIElfToolPostProcess</name> | |
<state>0</state> | |
</option> | |
</data> | |
</settings> | |
<settings> | |
<name>IARCHIVE</name> | |
<archiveVersion>0</archiveVersion> | |
<data> | |
<version>0</version> | |
<wantNonLocal>1</wantNonLocal> | |
<debug>1</debug> | |
<option> | |
<name>IarchiveInputs</name> | |
<state></state> | |
</option> | |
<option> | |
<name>IarchiveOverride</name> | |
<state>0</state> | |
</option> | |
<option> | |
<name>IarchiveOutput</name> | |
<state>###Unitialized###</state> | |
</option> | |
</data> | |
</settings> | |
<settings> | |
<name>BILINK</name> | |
<archiveVersion>0</archiveVersion> | |
<data/> | |
</settings> | |
</configuration> | |
<group> | |
<name>at91lib</name> | |
<group> | |
<name>boards</name> | |
<group> | |
<name>at91sam9xe-ek</name> | |
<group> | |
<name>at91sam9xe128</name> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek\at91sam9xe128\AT91SAM9XE128.h</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek\at91sam9xe128\flash.icf</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek\at91sam9xe128\sdram.icf</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek\at91sam9xe128\sram.icf</name> | |
</file> | |
</group> | |
<group> | |
<name>at91sam9xe256</name> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek\at91sam9xe256\AT91SAM9XE256.h</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek\at91sam9xe256\flash.icf</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek\at91sam9xe256\sdram.icf</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek\at91sam9xe256\sram.icf</name> | |
</file> | |
</group> | |
<group> | |
<name>at91sam9xe512</name> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek\at91sam9xe512\AT91SAM9XE512.h</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek\at91sam9xe512\flash.icf</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek\at91sam9xe512\sdram.icf</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek\at91sam9xe512\sram.icf</name> | |
</file> | |
</group> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek\board.h</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek\board_cstartup_iar.s</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek\board_lowlevel.c</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek\board_memories.c</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\boards\at91sam9xe-ek\board_memories.h</name> | |
</file> | |
</group> | |
</group> | |
<group> | |
<name>peripherals</name> | |
<group> | |
<name>aic</name> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals\aic\aic.c</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals\aic\aic.h</name> | |
</file> | |
</group> | |
<group> | |
<name>dbgu</name> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals\dbgu\dbgu.c</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals\dbgu\dbgu.h</name> | |
</file> | |
</group> | |
<group> | |
<name>pio</name> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals\pio\pio.c</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals\pio\pio.h</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals\pio\pio_it.c</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals\pio\pio_it.h</name> | |
</file> | |
</group> | |
<group> | |
<name>pit</name> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals\pit\pit.c</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals\pit\pit.h</name> | |
</file> | |
</group> | |
<group> | |
<name>PMC</name> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals\pmc\pmc.c</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals\pmc\pmc.h</name> | |
</file> | |
</group> | |
<group> | |
<name>tc</name> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals\tc\tc.c</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals\tc\tc.h</name> | |
</file> | |
</group> | |
<group> | |
<name>usart</name> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals\usart\usart.c</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\peripherals\usart\usart.h</name> | |
</file> | |
</group> | |
</group> | |
<group> | |
<name>utility</name> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\utility\assert.h</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\utility\led.c</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\utility\led.h</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\drivers\Atmel\at91lib\utility\trace.h</name> | |
</file> | |
</group> | |
</group> | |
<group> | |
<name>resources</name> | |
<file> | |
<name>$PROJ_DIR$\..\..\..\resources\at91sam9xe-ek-flash.mac</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\..\resources\at91sam9xe-ek-sdram.mac</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\..\resources\at91sam9xe-ek-sram.mac</name> | |
</file> | |
</group> | |
<group> | |
<name>scheduler_source</name> | |
<file> | |
<name>$PROJ_DIR$\..\..\..\Source\portable\MemMang\heap_3.c</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\..\Source\list.c</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\..\Source\portable\IAR\AtmelSAM9XE\port.c</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\..\Source\portable\IAR\AtmelSAM9XE\portasm.s79</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\..\Source\queue.c</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\..\Source\tasks.c</name> | |
</file> | |
</group> | |
<group> | |
<name>standard_demo_source</name> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\Minimal\BlockQ.c</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\Minimal\blocktim.c</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\Minimal\comtest.c</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\Minimal\countsem.c</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\Minimal\death.c</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\Minimal\dynamic.c</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\Minimal\flash.c</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\Minimal\GenQTest.c</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\Minimal\integer.c</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\Minimal\PollQ.c</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\Minimal\QPeek.c</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\Minimal\recmutex.c</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\..\Common\Minimal\semtest.c</name> | |
</file> | |
</group> | |
<file> | |
<name>$PROJ_DIR$\..\main.c</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\ParTest\ParTest.c</name> | |
</file> | |
<file> | |
<name>$PROJ_DIR$\..\serial\serial.c</name> | |
</file> | |
</project> | |