blob: 3e2c6ff07418b527f93f395a8ecb1794040e619e [file] [log] [blame]
/*This file has been prepared for Doxygen automatic documentation generation.*/
/*! \file *********************************************************************
*
* \brief GPIO header for AVR32 UC3.
*
* This file contains basic GPIO driver functions.
*
* - Compiler: IAR EWAVR32 and GNU GCC for AVR32
* - Supported devices: All AVR32 devices with a GPIO module can be used.
* - AppNote:
*
* \author Atmel Corporation: http://www.atmel.com \n
* Support and FAQ: http://support.atmel.no/
*
*****************************************************************************/
/* Copyright (c) 2007, Atmel Corporation All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* 3. The name of ATMEL may not be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND
* SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _GPIO_H_
#define _GPIO_H_
#include <avr32/io.h>
/*! \name Return Values of the GPIO API
*/
//! @{
#define GPIO_SUCCESS 0 //!< Function successfully completed.
#define GPIO_INVALID_ARGUMENT 1 //!< Input parameters are out of range.
//! @}
/*! \name Interrupt Trigger Modes
*/
//! @{
#define GPIO_PIN_CHANGE 0 //!< Interrupt triggered upon pin change.
#define GPIO_RISING_EDGE 1 //!< Interrupt triggered upon rising edge.
#define GPIO_FALLING_EDGE 2 //!< Interrupt triggered upon falling edge.
//! @}
//! A type definition of pins and modules connectivity.
typedef struct
{
unsigned char pin; //!< Module pin.
unsigned char function; //!< Module function.
} gpio_map_t[];
/*! \brief Enables specific module modes for a set of pins.
*
* \param gpiomap The pin map.
* \param size The number of pins in \a gpiomap.
*
* \return \ref GPIO_SUCCESS or \ref GPIO_INVALID_ARGUMENT.
*/
extern int gpio_enable_module(const gpio_map_t gpiomap, unsigned int size);
/*! \brief Enables a specific module mode for a pin.
*
* \param pin The pin number.\n
* Refer to the product header file `uc3x.h' (where x is the part
* number; e.g. x = a0512) for module pins. E.g., to enable a PWM
* channel output, the pin number can be AVR32_PWM_PWM_3_PIN for PWM
* channel 3.
* \param function The pin function.\n
* Refer to the product header file `uc3x.h' (where x is the
* part number; e.g. x = a0512) for module pin functions. E.g.,
* to enable a PWM channel output, the pin function can be
* AVR32_PWM_PWM_3_FUNCTION for PWM channel 3.
*
* \return \ref GPIO_SUCCESS or \ref GPIO_INVALID_ARGUMENT.
*/
extern int gpio_enable_module_pin(unsigned int pin, unsigned int function);
/*! \brief Enables the GPIO mode of a set of pins.
*
* \param gpiomap The pin map.
* \param size The number of pins in \a gpiomap.
*/
extern void gpio_enable_gpio(const gpio_map_t gpiomap, unsigned int size);
/*! \brief Enables the GPIO mode of a pin.
*
* \param pin The pin number.\n
* Refer to the product header file `uc3x.h' (where x is the part
* number; e.g. x = a0512) for pin definitions. E.g., to enable the
* GPIO mode of PX21, AVR32_PIN_PX21 can be used. Module pins such as
* AVR32_PWM_PWM_3_PIN for PWM channel 3 can also be used to release
* module pins for GPIO.
*/
extern void gpio_enable_gpio_pin(unsigned int pin);
/*! \brief Enables the open-drain mode of a pin.
*
* \param pin The pin number.
*/
extern void gpio_enable_pin_open_drain(unsigned int pin);
/*! \brief Disables the open-drain mode of a pin.
*
* \param pin The pin number.
*/
extern void gpio_disable_pin_open_drain(unsigned int pin);
/*! \brief Enables the pull-up resistor of a pin.
*
* \param pin The pin number.
*/
extern void gpio_enable_pin_pull_up(unsigned int pin);
/*! \brief Disables the pull-up resistor of a pin.
*
* \param pin The pin number.
*/
extern void gpio_disable_pin_pull_up(unsigned int pin);
/*! \brief Returns the value of a pin.
*
* \param pin The pin number.
*
* \return The pin value.
*/
extern int gpio_get_pin_value(unsigned int pin);
/*! \brief Returns the output value set for a GPIO pin.
*
* \param pin The pin number.
*
* \return The pin output value.
*/
extern int gpio_get_gpio_pin_output_value(unsigned int pin);
/*! \brief Drives a GPIO pin to 1.
*
* \param pin The pin number.
*/
extern void gpio_set_gpio_pin(unsigned int pin);
/*! \brief Drives a GPIO pin to 0.
*
* \param pin The pin number.
*/
extern void gpio_clr_gpio_pin(unsigned int pin);
/*! \brief Toggles a GPIO pin.
*
* \param pin The pin number.
*/
extern void gpio_tgl_gpio_pin(unsigned int pin);
/*! \brief Enables the glitch filter of a pin.
*
* When the glitch filter is enabled, a glitch with duration of less than 1
* clock cycle is automatically rejected, while a pulse with duration of 2 clock
* cycles or more is accepted. For pulse durations between 1 clock cycle and 2
* clock cycles, the pulse may or may not be taken into account, depending on
* the precise timing of its occurrence. Thus for a pulse to be guaranteed
* visible it must exceed 2 clock cycles, whereas for a glitch to be reliably
* filtered out, its duration must not exceed 1 clock cycle. The filter
* introduces 2 clock cycles latency.
*
* \param pin The pin number.
*/
extern void gpio_enable_pin_glitch_filter(unsigned int pin);
/*! \brief Disables the glitch filter of a pin.
*
* \param pin The pin number.
*/
extern void gpio_disable_pin_glitch_filter(unsigned int pin);
/*! \brief Enables the interrupt of a pin with the specified settings.
*
* \param pin The pin number.
* \param mode The trigger mode (\ref GPIO_PIN_CHANGE, \ref GPIO_RISING_EDGE or
* \ref GPIO_FALLING_EDGE).
*
* \return \ref GPIO_SUCCESS or \ref GPIO_INVALID_ARGUMENT.
*/
extern int gpio_enable_pin_interrupt(unsigned int pin, unsigned int mode);
/*! \brief Disables the interrupt of a pin.
*
* \param pin The pin number.
*/
extern void gpio_disable_pin_interrupt(unsigned int pin);
/*! \brief Gets the interrupt flag of a pin.
*
* \param pin The pin number.
*
* \return The pin interrupt flag.
*/
extern int gpio_get_pin_interrupt_flag(unsigned int pin);
/*! \brief Clears the interrupt flag of a pin.
*
* \param pin The pin number.
*/
extern void gpio_clear_pin_interrupt_flag(unsigned int pin);
#endif // _GPIO_H_