| /****************************************************************************** |
| * |
| * Copyright (C) 2014 - 2015 Xilinx, Inc. All rights reserved. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * Use of the Software is limited solely to applications: |
| * (a) running on a Xilinx device, or |
| * (b) that interact with a Xilinx device through a bus or interconnect. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF |
| * OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
| * SOFTWARE. |
| * |
| * Except as contained in this notice, the name of the Xilinx shall not be used |
| * in advertising or otherwise to promote the sale, use or other dealings in |
| * this Software without prior written authorization from Xilinx. |
| * |
| ******************************************************************************/ |
| /*****************************************************************************/ |
| /** |
| * @file translation_table.s |
| * |
| * This file contains the initialization for the MMU table in RAM |
| * needed by the Cortex A53 processor |
| * |
| * <pre> |
| * MODIFICATION HISTORY: |
| * |
| * Ver Who Date Changes |
| * ----- ---- -------- --------------------------------------------------- |
| * 5.00 pkp 05/21/14 Initial version |
| * 5.04 pkp 12/18/15 Updated the address map according to proper address map |
| * 6.0 mus 07/20/16 Added warning for ddrless HW design CR-954977 |
| * |
| * @note |
| * |
| * None. |
| * |
| ******************************************************************************/ |
| #include "xparameters.h" |
| |
| .globl MMUTableL0 |
| .globl MMUTableL1 |
| .globl MMUTableL2 |
| |
| .set reserved, 0x0 /* Fault*/ |
| .set Memory, 0x405 | (3 << 8) | (0x0) /* normal writeback write allocate inner shared read write */ |
| .set Device, 0x409 | (1 << 53)| (1 << 54) |(0x0) /* strongly ordered read write non executable*/ |
| .section .mmu_tbl0,"a" |
| |
| MMUTableL0: |
| |
| .set SECT, MMUTableL1 /* 0x0000_0000 - 0x7F_FFFF_FFFF */ |
| .8byte SECT + 0x3 |
| .set SECT, MMUTableL1+0x1000 /* 0x80_0000_0000 - 0xFF_FFFF_FFFF */ |
| .8byte SECT + 0x3 |
| |
| .section .mmu_tbl1,"a" |
| |
| MMUTableL1: |
| |
| .set SECT, MMUTableL2 /* 0x0000_0000 - 0x3FFF_FFFF */ |
| .8byte SECT + 0x3 /* 1GB DDR */ |
| |
| .rept 0x3 /* 0x4000_0000 - 0xFFFF_FFFF */ |
| .set SECT, SECT + 0x1000 /*1GB DDR, 1GB PL, 2GB other devices n memory */ |
| .8byte SECT + 0x3 |
| .endr |
| |
| .set SECT,0x100000000 |
| .rept 0xC /* 0x0001_0000_0000 - 0x0003_FFFF_FFFF */ |
| .8byte SECT + reserved /* 12GB Reserved */ |
| .set SECT, SECT + 0x40000000 |
| .endr |
| |
| .rept 0x10 /* 0x0004_0000_0000 - 0x0007_FFFF_FFFF */ |
| .8byte SECT + Device /* 8GB PL, 8GB PCIe */ |
| .set SECT, SECT + 0x40000000 |
| .endr |
| |
| .rept 0x20 /* 0x0008_0000_0000 - 0x000F_FFFF_FFFF */ |
| .8byte SECT + Memory /* 32GB DDR */ |
| .set SECT, SECT + 0x40000000 |
| .endr |
| |
| .rept 0x1C0 /* 0x0010_0000_0000 - 0x007F_FFFF_FFFF */ |
| .8byte SECT + Device /* 448 GB PL */ |
| .set SECT, SECT + 0x40000000 |
| .endr |
| |
| |
| .rept 0x100 /* 0x0080_0000_0000 - 0x00BF_FFFF_FFFF */ |
| .8byte SECT + Device /* 256GB PCIe */ |
| .set SECT, SECT + 0x40000000 |
| .endr |
| |
| |
| .rept 0x100 /* 0x00C0_0000_0000 - 0x00FF_FFFF_FFFF */ |
| .8byte SECT + reserved /* 256GB reserved */ |
| .set SECT, SECT + 0x40000000 |
| .endr |
| |
| |
| .section .mmu_tbl2,"a" |
| |
| MMUTableL2: |
| |
| .set SECT, 0 |
| |
| #ifdef XPAR_PSU_DDR_0_S_AXI_BASEADDR |
| .set DDR_START, XPAR_PSU_DDR_0_S_AXI_BASEADDR |
| .set DDR_END, XPAR_PSU_DDR_0_S_AXI_HIGHADDR |
| .set DDR_SIZE, (DDR_END - DDR_START)+1 |
| .if DDR_SIZE > 0x80000000 |
| /* If DDR size is larger than 2GB, truncate to 2GB */ |
| .set DDR_REG, 0x400 |
| .else |
| .set DDR_REG, DDR_SIZE/0x200000 |
| .endif |
| #else |
| .set DDR_REG, 0 |
| #warning "There's no DDR in the HW design. MMU translation table marks 2 GB DDR address space as undefined" |
| #endif |
| |
| .set UNDEF_REG, 0x400 - DDR_REG |
| |
| .rept DDR_REG /* DDR based on size in hdf*/ |
| .8byte SECT + Memory |
| .set SECT, SECT+0x200000 |
| .endr |
| |
| .rept UNDEF_REG /* reserved for region where ddr is absent */ |
| .8byte SECT + reserved |
| .set SECT, SECT+0x200000 |
| .endr |
| |
| .rept 0x0200 /* 0x8000_0000 - 0xBFFF_FFFF */ |
| .8byte SECT + Device /* 1GB lower PL */ |
| .set SECT, SECT+0x200000 |
| .endr |
| |
| .rept 0x0100 /* 0xC000_0000 - 0xDFFF_FFFF */ |
| .8byte SECT + Device /* 512MB QSPI */ |
| .set SECT, SECT+0x200000 |
| .endr |
| |
| .rept 0x080 /* 0xE000_0000 - 0xEFFF_FFFF */ |
| .8byte SECT + Device /* 256MB lower PCIe */ |
| .set SECT, SECT+0x200000 |
| .endr |
| |
| .rept 0x040 /* 0xF000_0000 - 0xF7FF_FFFF */ |
| .8byte SECT + reserved /* 128MB Reserved */ |
| .set SECT, SECT+0x200000 |
| .endr |
| |
| .rept 0x8 /* 0xF800_0000 - 0xF8FF_FFFF */ |
| .8byte SECT + Device /* 16MB coresight */ |
| .set SECT, SECT+0x200000 |
| .endr |
| |
| /* 1MB RPU LLP is marked for 2MB region as the minimum block size in |
| translation table is 2MB and adjacent 63MB reserved region is |
| converted to 62MB */ |
| |
| .rept 0x1 /* 0xF900_0000 - 0xF91F_FFFF */ |
| .8byte SECT + Device /* 2MB RPU low latency port */ |
| .set SECT, SECT+0x200000 |
| .endr |
| |
| .rept 0x1F /* 0xF920_0000 - 0xFCFF_FFFF */ |
| .8byte SECT + reserved /* 62MB Reserved */ |
| .set SECT, SECT+0x200000 |
| .endr |
| |
| .rept 0x8 /* 0xFD00_0000 - 0xFDFF_FFFF */ |
| .8byte SECT + Device /* 16MB FPS */ |
| .set SECT, SECT+0x200000 |
| .endr |
| |
| .rept 0xE /* 0xFE00_0000 - 0xFFBF_FFFF */ |
| .8byte SECT + Device /* 28MB LPS */ |
| .set SECT, SECT+0x200000 |
| .endr |
| |
| /* 0xFFC0_0000 - 0xFFDF_FFFF */ |
| .8byte SECT + Device /*2MB PMU/CSU */ |
| |
| .set SECT, SECT+0x200000 /* 0xFFE0_0000 - 0xFFFF_FFFF*/ |
| .8byte SECT + Memory /*2MB OCM/TCM*/ |
| |
| .end |
