blob: 7344e06e71f97187c858507aff98d82e7c24086e [file] [log] [blame]
// ---------------------------------------------------------
// ATMEL Microcontroller Software Support
// ---------------------------------------------------------
// The software is delivered "AS IS" without warranty or
// condition of any kind, either express, implied or
// statutory. This includes without limitation any warranty
// or condition with respect to merchantability or fitness
// for any particular purpose, or against the infringements of
// intellectual property rights of others.
// ---------------------------------------------------------
// File: sama5d3x-ek-ddram.mac
// User setup file for CSPY debugger.
//
// ---------------------------------------------------------
__var __tempo_var;
__var __dummy_read;
__var __data_test;
__var __mac_i;
__var REG_CKGR_MOR;
__var CKGR_MOR_MOSCXTEN;
__var CKGR_MOR_MOSCXTBY;
__var CKGR_MOR_MOSCRCEN;
__var CKGR_MOR_MOSCSEL;
__var REG_CKGR_MCFR;
__var CKGR_MCFR_MAINFRDY;
__var REG_PMC_SR;
__var PMC_SR_MCKRDY;
__var PMC_SR_LOCKA;
__var PMC_PCK_CSS_MAIN_CLK;
__var REG_CKGR_PLLAR;
__var REG_PMC_PLLICPR;
__var REG_PMC_MCKR;
__var PMC_MCKR_PLLADIV2_DIV2;
__var PMC_MCKR_PRES_Msk;
__var PMC_MCKR_PRES_CLOCK;
__var PMC_MCKR_MDIV_Msk;
__var PMC_MCKR_MDIV_PCK_DIV3;
__var PMC_MCKR_CSS_PLLA_CLK;
__var PMC_SR_MOSCSELS;
/*********************************************************************
*
* execUserReset() : JTAG set initially to Full Speed
*/
execUserReset()
{
__message "------------------------------ execUserReset ---------------------------------";
CheckNoRemap();
__message "-------------------------------Set PC Reset ----------------------------------";
__writeMemory32(0xD3,0x98,"Register"); //* Set CPSR
}
/*********************************************************************
*
* execUserPreload() : JTAG set initially to 32kHz
*/
execUserPreload()
{
__message "------------------------------ execUserPreload ---------------------------------";
__hwReset(0); //* Hardware Reset: CPU is automatically halted after the reset (JTAG is already configured to 32kHz)
__writeMemory32(0xD3,0x98,"Register"); //* Set CPSR
// DDR reset
//MPDDRC->MPDDRC_LPR = MPDDRC_LPR_LPCB_DEEP_PWD |MPDDRC_LPR_CLK_FR_ENABLED;
__writeMemory32(0x07,0xFFFFEA1C,"Memory");
// Disable DDR clock
//PMC->PMC_PCDR1 |= (1 << (ID_MPDDRC-32));
__tempo_var = __readMemory32(0xFFFFFD08,"Memory");
__tempo_var |= 0x00020000;
__writeMemory32(__tempo_var,0xFFFFFD04,"Memory"); // Enable MPDDR controller clock
// PMC->PMC_SCDR |= PMC_SCER_DDRCK;
__tempo_var = __readMemory32(0xFFFFFC08,"Memory");
__tempo_var |= 0x00000084;
__writeMemory32(__tempo_var,0xFFFFFC04,"Memory"); // System Clock Enable Register : Enable DDR clock
PMC_SelectExt12M_Osc();
PMC_SwitchMck2Main();
PMC_SetPllA();
PMC_SetMckPllaDiv();
PMC_SetMckPrescaler();
PMC_SetMckDivider();
PMC_SwitchMck2Pll();
__message "------------ PLL set to 792 MHz, MCK set to 132 MHz ------------";
//#define DDRAM_MT47H64M16HR 0
//#define DDRAM_MT47H128M16RT 1
//#define BOARD_DDRAM_TYPE DDRAM_MT47H128M16RT
__initDDR2(1); //* Init DDR2 memory
__message "------------ DDR2 is initialized ------------";
CheckNoRemap(); //* Set the RAM memory at 0x0020 0000 & 0x0000 0000
Watchdog(); //* Watchdog Disable
//* Get the Chip ID (AT91C_DBGU_C1R & AT91C_DBGU_C2R
__mac_i=__readMemory32(0xFFFFEE40,"Memory");
__message " ---------------------------------------- Chip ID 0x",__mac_i:%X;
}
/*********************************************************************
*
* CheckRemap()
*
* Function description
* Check the Remap.
*/
CheckNoRemap()
{
__tempo_var = __readMemory32(0x00000000,"Memory");
if (__tempo_var == 0xAA55AA55)
{
__data_test = 0x55AA55AA;
}
else
{
__data_test = 0xAA55AA55;
}
__writeMemory32(__data_test,0x00000000,"Memory");
__dummy_read = __readMemory32(0x00000000,"Memory");
__writeMemory32(__tempo_var,0x00000000,"Memory");
if (__dummy_read == __data_test)
{
__message " ------------------------ The Remap is already done ------------------------";
}
else
{
__message " ------------------------ The Remap is not DONE ------------------------";
__writeMemory32(0x00000001,0xFFFFED00,"Memory");
__delay(2);
__writeMemory32(0x00000001,0x00800000,"Memory");
__delay(50);
__message "------------ The Remap was executed ------------";
}
}
/*********************************************************************
*
* _Watchdog()
*
* Function description
* Clear Watchdog
*/
Watchdog()
{
// Watchdog Disable
__writeMemory32(0x00008000,0xFFFFFE44,"Memory");
__message " ------------------------ Watchdog Disable ------------------------";
}
/*********************************************************************
*
* PMC_SelectExt12M_Osc()
*
* Function description
* Select external 12MHz oscillator
*/
PMC_SelectExt12M_Osc()
{
REG_CKGR_MOR = 0xFFFFFC20;
CKGR_MOR_MOSCXTEN = (0x1 << 0); /*(CKGR_MOR) Main Crystal Oscillator Enable */
CKGR_MOR_MOSCXTBY = (0x1 << 1); /*(CKGR_MOR) Main Crystal Oscillator Bypass */
CKGR_MOR_MOSCRCEN = (0x1 << 3); /*(CKGR_MOR) Main On-Chip RC Oscillator Enable */
CKGR_MOR_MOSCSEL = (0x1 << 24); /*(CKGR_MOR) Main Oscillator Selection */
REG_CKGR_MCFR = 0xFFFFFC24; /*(PMC) Main Clock Frequency Register */
CKGR_MCFR_MAINFRDY = (0x1 << 16); /*(CKGR_MCFR) Main Clock Ready */
REG_PMC_SR = 0xFFFFFC68; /*(PMC) Status Register */
PMC_SR_MOSCSELS = (0x1 << 16); /*(PMC_SR) Main Oscillator Selection Status */
PMC_SR_MCKRDY = (0x1 << 3); /*(PMC_SR) Master Clock Status */
/* enable external OSC 12 MHz */
__tempo_var = __readMemory32(REG_CKGR_MOR,"Memory");
__tempo_var |= CKGR_MOR_MOSCXTEN | (0x37 << 16);
__writeMemory32(__tempo_var,REG_CKGR_MOR,"Memory");
/* wait Main CLK Ready */
while(!((__readMemory32(REG_CKGR_MCFR,"Memory")) & CKGR_MCFR_MAINFRDY));
/* disable external OSC 12 MHz bypass */
__tempo_var = __readMemory32(REG_CKGR_MOR,"Memory");
__tempo_var = (__tempo_var & ~CKGR_MOR_MOSCXTBY) | (0x37 << 16);
__writeMemory32(__tempo_var,REG_CKGR_MOR,"Memory");
/* switch MAIN clock to external OSC 12 MHz*/
__tempo_var = __readMemory32(REG_CKGR_MOR,"Memory");
__tempo_var |= CKGR_MOR_MOSCSEL | (0x37 << 16);
__writeMemory32(__tempo_var,REG_CKGR_MOR,"Memory");
/* wait MAIN clock status change for external OSC 12 MHz selection*/
while(!((__readMemory32(REG_PMC_SR,"Memory")) & PMC_SR_MOSCSELS));
/* in case when MCK is running on MAIN CLK */
while(!((__readMemory32(REG_PMC_SR,"Memory")) & PMC_SR_MCKRDY));
/* disable internal RC 12 MHz*/
//__tempo_var = __readMemory32(REG_CKGR_MOR,"Memory");
//__tempo_var = (__tempo_var & ~CKGR_MOR_MOSCRCEN) | (0x37 << 16);
//__writeMemory32(__tempo_var,REG_CKGR_MOR,"Memory");
//__mac_i=__readMemory32(REG_CKGR_MOR,"Memory");
__message " -------- PMC_SelectExt12M_Osc ---------- REG_CKGR_MOR 0x",__mac_i:%X;
}
/*********************************************************************
*
* PMC_SwitchMck2Main()
*
* Function description
* Switch PMC from MCK to main clock.
*/
PMC_SwitchMck2Main()
{
REG_PMC_MCKR = 0xFFFFFC30; /*(PMC) Master Clock Register */
PMC_PCK_CSS_MAIN_CLK = (0x1 << 0); /*(PMC_PCK[3]) Main Clock is selected */
PMC_SR_MCKRDY = (0x1 << 3); /*(PMC_SR) Master Clock Status */
REG_PMC_SR = 0xFFFFFC68; /*(PMC) Status Register */
/* Select Main Oscillator as input clock for PCK and MCK */
__tempo_var = __readMemory32(REG_PMC_MCKR,"Memory");
__tempo_var = (__tempo_var & ~0x03)| PMC_PCK_CSS_MAIN_CLK ;
__writeMemory32(__tempo_var, REG_PMC_MCKR,"Memory");
while(!((__readMemory32(REG_PMC_SR,"Memory")) & PMC_SR_MCKRDY));
__mac_i=__readMemory32(REG_PMC_MCKR,"Memory");
__message " --------- PMC_SwitchMck2Main ----------- REG_PMC_MCKR 0x",__mac_i:%X;
}
/*********************************************************************
*
* PMC_SetPllA()
*
* Function description
* Configure PLLA Registe.
*/
PMC_SetPllA()
{
REG_CKGR_PLLAR = 0xFFFFFC28; /*(PMC) PLLA Register */
REG_PMC_PLLICPR = 0xFFFFFC80; /*(PMC) PLL Charge Pump Current Register */
REG_PMC_SR = 0xFFFFFC68; /*(PMC) Status Register */
PMC_SR_LOCKA = (0x1 << 1); /*(PMC_SR) PLLA Lock Status */
__writeMemory32(((0x1 << 29) | (0x3F << 8) | ( 0 << 14) | (65 << 18) | 1 ), REG_CKGR_PLLAR,"Memory");
__writeMemory32((0x03<<8), REG_PMC_PLLICPR,"Memory");
while(!((__readMemory32(REG_PMC_SR,"Memory")) & PMC_SR_LOCKA));
__mac_i=__readMemory32(REG_CKGR_PLLAR,"Memory");
__message " --------- PMC_SetPllA ---------------- REG_CKGR_PLLAR 0x",__mac_i:%X;
}
/*********************************************************************
*
* PMC_SetMckPllaDiv()
*
* Function description
* Configure MCK PLLA divider.
*/
PMC_SetMckPllaDiv()
{
REG_PMC_MCKR = 0xFFFFFC30; /*(PMC) Master Clock Register */
PMC_MCKR_PLLADIV2_DIV2 = (0x1 << 12); /*(PMC_MCKR) PLLA clock frequency is divided by 2. */
__tempo_var = __readMemory32(REG_PMC_MCKR,"Memory");
if ((__tempo_var & PMC_MCKR_PLLADIV2_DIV2) != PMC_MCKR_PLLADIV2_DIV2)
{
__tempo_var |= PMC_MCKR_PLLADIV2_DIV2;
__writeMemory32(__tempo_var, REG_PMC_MCKR,"Memory");
while(!((__readMemory32(REG_PMC_SR,"Memory")) & PMC_SR_MCKRDY));
}
}
/*********************************************************************
*
* PMC_SetMckPrescaler()
*
* Function description
* Configure MCK Prescaler.
*/
PMC_SetMckPrescaler()
{
REG_PMC_MCKR = 0xFFFFFC30; /*(PMC) Master Clock Register */
PMC_MCKR_PRES_Msk = (0x7 << 4); /*(PMC_MCKR) Master/Processor Clock Prescaler */
PMC_MCKR_PRES_CLOCK = (0x0 << 4); /*(PMC_MCKR) Selected clock */
/* Change MCK Prescaler divider in PMC_MCKR register */
__tempo_var = __readMemory32(REG_PMC_MCKR,"Memory");
__tempo_var = (__tempo_var & ~PMC_MCKR_PRES_Msk) | PMC_MCKR_PRES_CLOCK;
__writeMemory32(__tempo_var, REG_PMC_MCKR,"Memory");
while(!((__readMemory32(REG_PMC_SR,"Memory")) & PMC_SR_MCKRDY));
__mac_i=__readMemory32(REG_PMC_MCKR,"Memory");
__message " --------- PMC_SetMckPrescaler -------------- REG_PMC_MCKR 0x",__mac_i:%X;
}
/*********************************************************************
*
* PMC_SetMckDivider()
*
* Function description
* Configure MCK Divider.
*/
PMC_SetMckDivider()
{
REG_PMC_MCKR = 0xFFFFFC30; /*(PMC) Master Clock Register */
PMC_MCKR_MDIV_Msk = (0x3 << 8); /*(PMC_MCKR) Master Clock Division */
PMC_MCKR_MDIV_PCK_DIV3 = (0x3 << 8); /*(PMC_MCKR) Master Clock is Prescaler Output Clock divided by 3.SysClk DDR is equal to 2 x MCK. DDRCK is equal to MCK. */
/* change MCK Prescaler divider in PMC_MCKR register */
__tempo_var = __readMemory32(REG_PMC_MCKR,"Memory");
__tempo_var = (__tempo_var & ~PMC_MCKR_MDIV_Msk) | PMC_MCKR_MDIV_PCK_DIV3;
__writeMemory32(__tempo_var, REG_PMC_MCKR,"Memory");
while(!((__readMemory32(REG_PMC_SR,"Memory")) & PMC_SR_MCKRDY));
__mac_i=__readMemory32(REG_PMC_MCKR,"Memory");
__message " --------- PMC_SetMckDivider -------------- REG_PMC_MCKR 0x",__mac_i:%X;
}
/*********************************************************************
*
* PMC_SwitchMck2Pll()
*
* Function description
* Switch PMC from MCK to PLL clock.
*/
PMC_SwitchMck2Pll()
{
REG_PMC_MCKR = 0xFFFFFC30; /*(PMC) Master Clock Register */
PMC_MCKR_CSS_PLLA_CLK = (0x2 << 0); /*(PMC_MCKR) PLLACK/PLLADIV2 is selected */
/* Select PLL as input clock for PCK and MCK */
__tempo_var = __readMemory32(REG_PMC_MCKR,"Memory");
__tempo_var = (__tempo_var & ~0x03) | PMC_MCKR_CSS_PLLA_CLK;
__writeMemory32(__tempo_var, REG_PMC_MCKR,"Memory");
while(!((__readMemory32(REG_PMC_SR,"Memory")) & PMC_SR_MCKRDY));
__mac_i=__readMemory32(REG_PMC_MCKR,"Memory");
__message " --------- PMC_SwitchMck2Pll -------------- REG_PMC_MCKR 0x",__mac_i:%X;
}
// ---------------------------------------------------------------------------
// Function Name : __initDDR2
// Object : Set DDR2 memory for working at 133 Mhz
// ---------------------------------------------------------------------------
__initDDR2(type)
{
// ------------------ DDR Controller Registers --------------
// 0xFFFFEA00 Mode Register MPDDRC_MR
// 0xFFFFEA04 Refresh Timer Register MPDDRC_RTR
// 0xFFFFEA08 Configuration Register MPDDRC_CR
// 0xFFFFEA0C Timing Parameter 0 Register MPDDRC_TPR0
// 0xFFFFEA10 Timing Parameter 1 Register MPDDRC_TPR1
// 0xFFFFEA14 Timing Parameter 2 Register MPDDRC_TPR2
// 0xFFFFEA1C Low-power Register MPDDRC_LPR
// 0xFFFFEA20 Memory Device Register MPDDRC_MD
// 0xFFFFEA28 LPDDR2 Low-power Register MPDDRC_LPDDR2_LPR
// 0xFFFFEA2C LPDDR2 Calibration and MR4 Register MPDDRC_LPDDR2_CAL_MR4
// 0xFFFFEA30 LPDDR2 Timing Calibration Register MPDDRC_LPDDR2_TIM_CAL
// 0xFFFFEA34 IO Calibration MPDDRC_IO_CALIBR
// 0xFFFFEA38 OCMS Register MPDDRC_OCMS
// 0xFFFFEA3C OCMS KEY1 Register MPDDRC_OCMS_KEY1 Write-only
// 0xFFFFEA40 OCMS KEY2 Register MPDDRC_OCMS_KEY2 Write-only
// 0xFFFFEA74 DLL Master Offset Register MPDDRC_DLL_MOR
// 0xFFFFEA78 DLL Slave Offset Register MPDDRC_DLL_SOR
// 0xFFFFEA7C DLL Master Status Register MPDDRC_DLL_MSR Read-only
// 0xFFFFEA80 DLL Slave 0 Status Register MPDDRC_DLL_S0SR Read-only
// 0xFFFFEA84 DLL Slave 1 Status Register MPDDRC_DLL_S1SR Read-only
// 0xFFFFEAE4 Write Protect Control Register MPDDRC_WPCR
// 0xFFFFEAE8 Write Protect Status Register MPDDRC_WPSR Read-only
// -----------------------------------------------
// ---------------- DDR2 Timings (133MHz) -----------------
// -------- Configuration Register
// n_row = 14
// n_col = 10
// n_bank = 8
// -------- Refresh Timer Register
// t_refresh = 520
// -------- Timing 0 Register
// t_tras = TRAS 6
// t_trcd = TRCD 2
// t_twr = TWR 2
// t_trc = TRC 8
// t_trp = TRP 2
// t_trrd = TRRD 2
// t_twtr = TWTR 2
// t_tmrd = TMRD 2
// -------- Timing 1 Register
// t_trfc = TRFC 26/14
// t_txsnr = TXSNR 28/16
// t_txsrd = TXSRD 208
// t_txp = TXP 2
// -------- Timing 2 Register
// t_txard = TXARD 7
// t_tards = TXARDS 7
// t_trpa = TRPA 3
// t_trtp = TRTP 2
// t_tfaw = TFAW 10
// -----------------------------------------------
if (type == 0) {
__message " --------- Configure MT47H128M16 DDR2 ";
} else {
__message " --------- Configure MT47H64M16 DDR2 ";
}
__delay(2);
__writeMemory32(0x00008000,0xFFFFFE44,"Memory"); // Disable Watchdog
__writeMemory32(0x10000,0xFFFFEA1C,"Memory");
__writeMemory32(0x00020000,0xFFFFFD00,"Memory"); // Enable MPDDR controller clock
__writeMemory32(0x00000004,0xFFFFFC00,"Memory"); // System Clock Enable Register : Enable DDR clock
// __writeMemory32(0x00000020,0xFFFFEA24,"Memory"); // DDRSDRC High Speed Register (MPDDRC_HS) : hidden option -> calibration during autorefresh
// __writeMemory32(0x00030000,0xF0038004,"Memory"); // SFR_DDRCFG DDR Configuration Force DDR_DQ and DDR_DQS input buffer always on
__writeMemory32(0x01010101,0xFFFFEA78,"Memory"); // MPDDRC DLL Slave Offset Register : set DLL Slave x Delay Line Offset
__writeMemory32(0xC5011F07,0xFFFFEA74,"Memory"); // MPDDRC DLL Master Offset Register : DLL Master Delay Line Offset + DLL CLK90 Delay Line Offset + DLL Offset Selection
// __writeMemory32(0x00000028,0xFFFFEA24,"Memory"); // DDRSDRC High Speed Register : enable calibration during autorefresh
// __writeMemory32(0x00030001,0xF0038004,"Memory"); // SFR_DDRCFG DDR Configuration : Force DDR_DQ and DDR_DQS input buffer always on
__writeMemory32(0x01010101,0xFFFFEA78,"Memory"); // MPDDRC DLL Slave Offset Register : set DLL Slave x Delay Line Offset
__writeMemory32(0xC5011f07,0xFFFFEA74,"Memory"); // MPDDRC DLL Master Offset Register : DLL Master Delay Line Offset + DLL CLK90 Delay Line Offset + DLL Offset Selection
__writeMemory32(0x00870303,0xFFFFEA34,"Memory"); // MPDDRC I/O Calibration Register : set Resistor Divider + IO Calibration (delay between an IO Calibration Command and any Valid commands)
__writeMemory32(0x00001100,0xFFFFEA80,"Memory");
__writeMemory32(0x00001100,0xFFFFEA84,"Memory");
__writeMemory32(0x00001100,0xFFFFEA88,"Memory");
__writeMemory32(0x00001100,0xFFFFEA8C,"Memory");
// __writeMemory32(0x00000028,0xFFFFEA24,"Memory"); // DDRSDRC High Speed Register : enable calibration during autorefresh
// __writeMemory32(0x00030001,0xF0038004,"Memory"); // SFR_DDRCFG DDR Configuration : Force DDR_DQ and DDR_DQS input buffer always on
__writeMemory32(0x00000006,0xFFFFEA20,"Memory"); // Memory Device Register : 32bit mode - DDR2 mode
if (type == 0) {
__writeMemory32(0x00B0003D,0xFFFFEA08,"Memory"); // Configuration Register : row = 13, column(DDR) = 10, CAS 3, DLL reset disable, phase error correction is enabled / normal driver strength
} else {
__writeMemory32(0x00B0004D,0xFFFFEA08,"Memory"); // Configuration Register : row = 14, column(DDR) = 10, CAS 3, DLL reset disable, phase error correction is enabled / normal driver strength
}
__writeMemory32(0x22228326,0xFFFFEA0C,"Memory"); // Timing 0 Register : tras | trcd | twr | trc | trp | trrd | twtr | tmrd
__writeMemory32(0x02C81C1A,0xFFFFEA10,"Memory"); // Timing 1 Register : trfc | txsnr | txsrd | txp
__writeMemory32(0x00072278,0xFFFFEA14,"Memory"); // Timing 2 Register : txard | tards | trpa | trtp | tfaw
__writeMemory32(0x00000001,0xFFFFEA00,"Memory"); // Mode register : command NOP --> ENABLE CLOCK output
__writeMemory32(0x00000000,0x20000000,"Memory"); // DDR2 memory : access memory to validate preeceeding command
__delay(1); // wait 1 ms
__writeMemory32(0x00000001,0xFFFFEA00,"Memory"); // Mode register : command NOP --> ENABLE CLOCK output
__writeMemory32(0x00000000,0x20000000,"Memory"); // DDR2 memory : access memory to validate preeceeding command
__delay(1);
__writeMemory32(0x00000001,0xFFFFEA00,"Memory"); // Mode register : command NOP --> ENABLE CLOCK output
__writeMemory32(0x00000000,0x20000000,"Memory"); // DDR2 memory : access memory to validate preeceeding command
__delay(1);
__writeMemory32(0x00000002,0xFFFFEA00,"Memory"); // Mode register : command All Banks Precharge
__writeMemory32(0x00000000,0x20000000,"Memory"); // DDR2 memory : access memory to validate preeceeding command
__delay(1);
__writeMemory32(0x00000005,0xFFFFEA00,"Memory"); // Mode register : command Extended Load Mode Register : Set EMR Ext Mode Reg EMSR2 BA0=0 BA1=1
if (type == 0) {
__writeMemory32(0x00000000,0x24000000,"Memory"); // DDR2 memory : access memory to validate preeceeding command
} else {
__writeMemory32(0x00000000,0x28000000,"Memory"); // DDR2 memory : access memory to validate preeceeding command
}
__delay(1);
__writeMemory32(0x00000005,0xFFFFEA00,"Memory"); // Mode register : command Extended Load Mode Register : Set EMR Ext Mode Reg EMSR3 BA0=1 BA1=1
if (type == 0) {
__writeMemory32(0x00000000,0x26000000,"Memory"); // DDR2 memory : access memory to validate preeceeding command
} else {
__writeMemory32(0x00000000,0x2C000000,"Memory"); // DDR2 memory : access memory to validate preeceeding command
}
__delay(1);
__writeMemory32(0x00000005,0xFFFFEA00,"Memory"); // Mode register : command Extended Load Mode Register : Set EMR Ext Mode Reg EMSR1 BA0=1 BA1=0 ENABLE DLL
if (type == 0) {
__writeMemory32(0x00000000,0x22000000,"Memory"); // DDR2 memory : access memory to validate preeceeding command
} else {
__writeMemory32(0x00000000,0x24000000,"Memory"); // DDR2 memory : access memory to validate preeceeding command
}
__delay(1);
__writeMemory32(0x00B000BD,0xFFFFEA08,"Memory"); // Configuration Register : Enable DLL reset
__writeMemory32(0x00000003,0xFFFFEA00,"Memory"); // Mode register : command RESET DLL
__writeMemory32(0x00000000,0x20000000,"Memory"); // DDR2 memory : access memory to validate preeceeding command
__delay(1);
__writeMemory32(0x00000002,0xFFFFEA00,"Memory"); // Mode register : command All Banks Precharge
__writeMemory32(0x00000000,0x20000000,"Memory"); // DDR2 memory : access memory to validate preeceeding command
__delay(1);
__writeMemory32(0x00000004,0xFFFFEA00,"Memory"); // Mode register : 2 * command Auto-Refresh
__writeMemory32(0x00000000,0x20000000,"Memory"); // DDR2 memory : access memory to validate preeceeding command
__delay(1);
__writeMemory32(0x00000004,0xFFFFEA00,"Memory"); // Mode register :
__writeMemory32(0x00000000,0x20000000,"Memory"); // DDR2 memory : access memory to validate preeceeding command
__delay(1);
__writeMemory32(0x00B0003D,0xFFFFEA08,"Memory"); // Configuration Register : disable DLL reset
__writeMemory32(0x00000003,0xFFFFEA00,"Memory"); // Mode register : MRS initialize device operation (CAS latency, burst length and disable DLL reset)
__writeMemory32(0x00000000,0x20000000,"Memory"); // DDR2 memory : access memory to validate preeceeding command
__delay(1);
__writeMemory32(0x00B0703D,0xFFFFEA08,"Memory"); // Configuration Register : OCD default value
__writeMemory32(0x00000005,0xFFFFEA00,"Memory"); // Mode register : EMRS1 OCD Default values
if (type == 0) {
__writeMemory32(0x00000000,0x22000000,"Memory"); // DDR2 memory : access memory to validate preeceeding command
} else {
__writeMemory32(0x00000000,0x24000000,"Memory"); // DDR2 memory : access memory to validate preeceeding command
}
__delay(1);
__writeMemory32(0x00B0003D,0xFFFFEA08,"Memory"); // Configuration Register : OCD exit
__writeMemory32(0x00000005,0xFFFFEA00,"Memory"); // Mode register : EMRS1 OCD exit
if (type == 0) {
__writeMemory32(0x00000000,0x22000000,"Memory"); // DDR2 memory : access memory to validate preeceeding command
} else {
__writeMemory32(0x00000000,0x24000000,"Memory"); // DDR2 memory : access memory to validate preeceeding command
}
__delay(1);
__writeMemory32(0x00000000,0xFFFFEA00,"Memory"); // Mode register : command Normal mode
__writeMemory32(0x00000000,0x20000000,"Memory"); // DDR2 memory : access memory to validate preeceeding command
__delay(1);
__writeMemory32(0x00000000,0x20000000,"Memory"); // DDR2 memory : access memory to validate preeceeding command
__delay(1);
__writeMemory32(0x00300408,0xFFFFEA04,"Memory"); // Refresh Timer register : 520 for 133 MHz
__message "------------------------------- DDR2 memory init for 133 MHz ----------------------------------";
}