/** | |
* \file | |
* | |
* Copyright (c) 2015 Atmel Corporation. All rights reserved. | |
* | |
* \asf_license_start | |
* | |
* \page License | |
* | |
* Redistribution and use in source and binary forms, with or without | |
* modification, are permitted provided that the following conditions are met: | |
* | |
* 1. Redistributions of source code must retain the above copyright notice, | |
* this list of conditions and the following disclaimer. | |
* | |
* 2. Redistributions in binary form must reproduce the above copyright notice, | |
* this list of conditions and the following disclaimer in the documentation | |
* and/or other materials provided with the distribution. | |
* | |
* 3. The name of Atmel may not be used to endorse or promote products derived | |
* from this software without specific prior written permission. | |
* | |
* 4. This software may only be redistributed and used in connection with an | |
* Atmel microcontroller product. | |
* | |
* THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED | |
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF | |
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE | |
* EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR | |
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | |
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | |
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN | |
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | |
* POSSIBILITY OF SUCH DAMAGE. | |
* | |
* \asf_license_stop | |
* | |
*/ | |
/* | |
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> | |
*/ | |
#ifndef _SAME70_USART0_INSTANCE_ | |
#define _SAME70_USART0_INSTANCE_ | |
/* ========== Register definition for USART0 peripheral ========== */ | |
#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) | |
#define REG_USART0_CR (0x40024000U) /**< \brief (USART0) Control Register */ | |
#define REG_USART0_MR (0x40024004U) /**< \brief (USART0) Mode Register */ | |
#define REG_USART0_IER (0x40024008U) /**< \brief (USART0) Interrupt Enable Register */ | |
#define REG_USART0_IDR (0x4002400CU) /**< \brief (USART0) Interrupt Disable Register */ | |
#define REG_USART0_IMR (0x40024010U) /**< \brief (USART0) Interrupt Mask Register */ | |
#define REG_USART0_CSR (0x40024014U) /**< \brief (USART0) Channel Status Register */ | |
#define REG_USART0_RHR (0x40024018U) /**< \brief (USART0) Receive Holding Register */ | |
#define REG_USART0_THR (0x4002401CU) /**< \brief (USART0) Transmit Holding Register */ | |
#define REG_USART0_BRGR (0x40024020U) /**< \brief (USART0) Baud Rate Generator Register */ | |
#define REG_USART0_RTOR (0x40024024U) /**< \brief (USART0) Receiver Time-out Register */ | |
#define REG_USART0_TTGR (0x40024028U) /**< \brief (USART0) Transmitter Timeguard Register */ | |
#define REG_USART0_MAN (0x40024050U) /**< \brief (USART0) Manchester Configuration Register */ | |
#define REG_USART0_LINMR (0x40024054U) /**< \brief (USART0) LIN Mode Register */ | |
#define REG_USART0_LINIR (0x40024058U) /**< \brief (USART0) LIN Identifier Register */ | |
#define REG_USART0_LINBRR (0x4002405CU) /**< \brief (USART0) LIN Baud Rate Register */ | |
#define REG_USART0_LONMR (0x40024060U) /**< \brief (USART0) LON Mode Register */ | |
#define REG_USART0_LONPR (0x40024064U) /**< \brief (USART0) LON Preamble Register */ | |
#define REG_USART0_LONDL (0x40024068U) /**< \brief (USART0) LON Data Length Register */ | |
#define REG_USART0_LONL2HDR (0x4002406CU) /**< \brief (USART0) LON L2HDR Register */ | |
#define REG_USART0_LONBL (0x40024070U) /**< \brief (USART0) LON Backlog Register */ | |
#define REG_USART0_LONB1TX (0x40024074U) /**< \brief (USART0) LON Beta1 Tx Register */ | |
#define REG_USART0_LONB1RX (0x40024078U) /**< \brief (USART0) LON Beta1 Rx Register */ | |
#define REG_USART0_LONPRIO (0x4002407CU) /**< \brief (USART0) LON Priority Register */ | |
#define REG_USART0_IDTTX (0x40024080U) /**< \brief (USART0) LON IDT Tx Register */ | |
#define REG_USART0_IDTRX (0x40024084U) /**< \brief (USART0) LON IDT Rx Register */ | |
#define REG_USART0_ICDIFF (0x40024088U) /**< \brief (USART0) IC DIFF Register */ | |
#define REG_USART0_WPMR (0x400240E4U) /**< \brief (USART0) Write Protection Mode Register */ | |
#define REG_USART0_WPSR (0x400240E8U) /**< \brief (USART0) Write Protection Status Register */ | |
#else | |
#define REG_USART0_CR (*(__O uint32_t*)0x40024000U) /**< \brief (USART0) Control Register */ | |
#define REG_USART0_MR (*(__IO uint32_t*)0x40024004U) /**< \brief (USART0) Mode Register */ | |
#define REG_USART0_IER (*(__O uint32_t*)0x40024008U) /**< \brief (USART0) Interrupt Enable Register */ | |
#define REG_USART0_IDR (*(__O uint32_t*)0x4002400CU) /**< \brief (USART0) Interrupt Disable Register */ | |
#define REG_USART0_IMR (*(__I uint32_t*)0x40024010U) /**< \brief (USART0) Interrupt Mask Register */ | |
#define REG_USART0_CSR (*(__I uint32_t*)0x40024014U) /**< \brief (USART0) Channel Status Register */ | |
#define REG_USART0_RHR (*(__I uint32_t*)0x40024018U) /**< \brief (USART0) Receive Holding Register */ | |
#define REG_USART0_THR (*(__O uint32_t*)0x4002401CU) /**< \brief (USART0) Transmit Holding Register */ | |
#define REG_USART0_BRGR (*(__IO uint32_t*)0x40024020U) /**< \brief (USART0) Baud Rate Generator Register */ | |
#define REG_USART0_RTOR (*(__IO uint32_t*)0x40024024U) /**< \brief (USART0) Receiver Time-out Register */ | |
#define REG_USART0_TTGR (*(__IO uint32_t*)0x40024028U) /**< \brief (USART0) Transmitter Timeguard Register */ | |
#define REG_USART0_MAN (*(__IO uint32_t*)0x40024050U) /**< \brief (USART0) Manchester Configuration Register */ | |
#define REG_USART0_LINMR (*(__IO uint32_t*)0x40024054U) /**< \brief (USART0) LIN Mode Register */ | |
#define REG_USART0_LINIR (*(__IO uint32_t*)0x40024058U) /**< \brief (USART0) LIN Identifier Register */ | |
#define REG_USART0_LINBRR (*(__I uint32_t*)0x4002405CU) /**< \brief (USART0) LIN Baud Rate Register */ | |
#define REG_USART0_LONMR (*(__IO uint32_t*)0x40024060U) /**< \brief (USART0) LON Mode Register */ | |
#define REG_USART0_LONPR (*(__IO uint32_t*)0x40024064U) /**< \brief (USART0) LON Preamble Register */ | |
#define REG_USART0_LONDL (*(__IO uint32_t*)0x40024068U) /**< \brief (USART0) LON Data Length Register */ | |
#define REG_USART0_LONL2HDR (*(__IO uint32_t*)0x4002406CU) /**< \brief (USART0) LON L2HDR Register */ | |
#define REG_USART0_LONBL (*(__I uint32_t*)0x40024070U) /**< \brief (USART0) LON Backlog Register */ | |
#define REG_USART0_LONB1TX (*(__IO uint32_t*)0x40024074U) /**< \brief (USART0) LON Beta1 Tx Register */ | |
#define REG_USART0_LONB1RX (*(__IO uint32_t*)0x40024078U) /**< \brief (USART0) LON Beta1 Rx Register */ | |
#define REG_USART0_LONPRIO (*(__IO uint32_t*)0x4002407CU) /**< \brief (USART0) LON Priority Register */ | |
#define REG_USART0_IDTTX (*(__IO uint32_t*)0x40024080U) /**< \brief (USART0) LON IDT Tx Register */ | |
#define REG_USART0_IDTRX (*(__IO uint32_t*)0x40024084U) /**< \brief (USART0) LON IDT Rx Register */ | |
#define REG_USART0_ICDIFF (*(__IO uint32_t*)0x40024088U) /**< \brief (USART0) IC DIFF Register */ | |
#define REG_USART0_WPMR (*(__IO uint32_t*)0x400240E4U) /**< \brief (USART0) Write Protection Mode Register */ | |
#define REG_USART0_WPSR (*(__I uint32_t*)0x400240E8U) /**< \brief (USART0) Write Protection Status Register */ | |
#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ | |
#endif /* _SAME70_USART0_INSTANCE_ */ |