/** | |
* \file | |
* | |
* Copyright (c) 2015 Atmel Corporation. All rights reserved. | |
* | |
* \asf_license_start | |
* | |
* \page License | |
* | |
* Redistribution and use in source and binary forms, with or without | |
* modification, are permitted provided that the following conditions are met: | |
* | |
* 1. Redistributions of source code must retain the above copyright notice, | |
* this list of conditions and the following disclaimer. | |
* | |
* 2. Redistributions in binary form must reproduce the above copyright notice, | |
* this list of conditions and the following disclaimer in the documentation | |
* and/or other materials provided with the distribution. | |
* | |
* 3. The name of Atmel may not be used to endorse or promote products derived | |
* from this software without specific prior written permission. | |
* | |
* 4. This software may only be redistributed and used in connection with an | |
* Atmel microcontroller product. | |
* | |
* THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED | |
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF | |
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE | |
* EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR | |
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | |
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | |
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN | |
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | |
* POSSIBILITY OF SUCH DAMAGE. | |
* | |
* \asf_license_stop | |
* | |
*/ | |
/* | |
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> | |
*/ | |
#ifndef _SAME70_USART2_INSTANCE_ | |
#define _SAME70_USART2_INSTANCE_ | |
/* ========== Register definition for USART2 peripheral ========== */ | |
#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) | |
#define REG_USART2_CR (0x4002C000U) /**< \brief (USART2) Control Register */ | |
#define REG_USART2_MR (0x4002C004U) /**< \brief (USART2) Mode Register */ | |
#define REG_USART2_IER (0x4002C008U) /**< \brief (USART2) Interrupt Enable Register */ | |
#define REG_USART2_IDR (0x4002C00CU) /**< \brief (USART2) Interrupt Disable Register */ | |
#define REG_USART2_IMR (0x4002C010U) /**< \brief (USART2) Interrupt Mask Register */ | |
#define REG_USART2_CSR (0x4002C014U) /**< \brief (USART2) Channel Status Register */ | |
#define REG_USART2_RHR (0x4002C018U) /**< \brief (USART2) Receive Holding Register */ | |
#define REG_USART2_THR (0x4002C01CU) /**< \brief (USART2) Transmit Holding Register */ | |
#define REG_USART2_BRGR (0x4002C020U) /**< \brief (USART2) Baud Rate Generator Register */ | |
#define REG_USART2_RTOR (0x4002C024U) /**< \brief (USART2) Receiver Time-out Register */ | |
#define REG_USART2_TTGR (0x4002C028U) /**< \brief (USART2) Transmitter Timeguard Register */ | |
#define REG_USART2_MAN (0x4002C050U) /**< \brief (USART2) Manchester Configuration Register */ | |
#define REG_USART2_LINMR (0x4002C054U) /**< \brief (USART2) LIN Mode Register */ | |
#define REG_USART2_LINIR (0x4002C058U) /**< \brief (USART2) LIN Identifier Register */ | |
#define REG_USART2_LINBRR (0x4002C05CU) /**< \brief (USART2) LIN Baud Rate Register */ | |
#define REG_USART2_LONMR (0x4002C060U) /**< \brief (USART2) LON Mode Register */ | |
#define REG_USART2_LONPR (0x4002C064U) /**< \brief (USART2) LON Preamble Register */ | |
#define REG_USART2_LONDL (0x4002C068U) /**< \brief (USART2) LON Data Length Register */ | |
#define REG_USART2_LONL2HDR (0x4002C06CU) /**< \brief (USART2) LON L2HDR Register */ | |
#define REG_USART2_LONBL (0x4002C070U) /**< \brief (USART2) LON Backlog Register */ | |
#define REG_USART2_LONB1TX (0x4002C074U) /**< \brief (USART2) LON Beta1 Tx Register */ | |
#define REG_USART2_LONB1RX (0x4002C078U) /**< \brief (USART2) LON Beta1 Rx Register */ | |
#define REG_USART2_LONPRIO (0x4002C07CU) /**< \brief (USART2) LON Priority Register */ | |
#define REG_USART2_IDTTX (0x4002C080U) /**< \brief (USART2) LON IDT Tx Register */ | |
#define REG_USART2_IDTRX (0x4002C084U) /**< \brief (USART2) LON IDT Rx Register */ | |
#define REG_USART2_ICDIFF (0x4002C088U) /**< \brief (USART2) IC DIFF Register */ | |
#define REG_USART2_WPMR (0x4002C0E4U) /**< \brief (USART2) Write Protection Mode Register */ | |
#define REG_USART2_WPSR (0x4002C0E8U) /**< \brief (USART2) Write Protection Status Register */ | |
#else | |
#define REG_USART2_CR (*(__O uint32_t*)0x4002C000U) /**< \brief (USART2) Control Register */ | |
#define REG_USART2_MR (*(__IO uint32_t*)0x4002C004U) /**< \brief (USART2) Mode Register */ | |
#define REG_USART2_IER (*(__O uint32_t*)0x4002C008U) /**< \brief (USART2) Interrupt Enable Register */ | |
#define REG_USART2_IDR (*(__O uint32_t*)0x4002C00CU) /**< \brief (USART2) Interrupt Disable Register */ | |
#define REG_USART2_IMR (*(__I uint32_t*)0x4002C010U) /**< \brief (USART2) Interrupt Mask Register */ | |
#define REG_USART2_CSR (*(__I uint32_t*)0x4002C014U) /**< \brief (USART2) Channel Status Register */ | |
#define REG_USART2_RHR (*(__I uint32_t*)0x4002C018U) /**< \brief (USART2) Receive Holding Register */ | |
#define REG_USART2_THR (*(__O uint32_t*)0x4002C01CU) /**< \brief (USART2) Transmit Holding Register */ | |
#define REG_USART2_BRGR (*(__IO uint32_t*)0x4002C020U) /**< \brief (USART2) Baud Rate Generator Register */ | |
#define REG_USART2_RTOR (*(__IO uint32_t*)0x4002C024U) /**< \brief (USART2) Receiver Time-out Register */ | |
#define REG_USART2_TTGR (*(__IO uint32_t*)0x4002C028U) /**< \brief (USART2) Transmitter Timeguard Register */ | |
#define REG_USART2_MAN (*(__IO uint32_t*)0x4002C050U) /**< \brief (USART2) Manchester Configuration Register */ | |
#define REG_USART2_LINMR (*(__IO uint32_t*)0x4002C054U) /**< \brief (USART2) LIN Mode Register */ | |
#define REG_USART2_LINIR (*(__IO uint32_t*)0x4002C058U) /**< \brief (USART2) LIN Identifier Register */ | |
#define REG_USART2_LINBRR (*(__I uint32_t*)0x4002C05CU) /**< \brief (USART2) LIN Baud Rate Register */ | |
#define REG_USART2_LONMR (*(__IO uint32_t*)0x4002C060U) /**< \brief (USART2) LON Mode Register */ | |
#define REG_USART2_LONPR (*(__IO uint32_t*)0x4002C064U) /**< \brief (USART2) LON Preamble Register */ | |
#define REG_USART2_LONDL (*(__IO uint32_t*)0x4002C068U) /**< \brief (USART2) LON Data Length Register */ | |
#define REG_USART2_LONL2HDR (*(__IO uint32_t*)0x4002C06CU) /**< \brief (USART2) LON L2HDR Register */ | |
#define REG_USART2_LONBL (*(__I uint32_t*)0x4002C070U) /**< \brief (USART2) LON Backlog Register */ | |
#define REG_USART2_LONB1TX (*(__IO uint32_t*)0x4002C074U) /**< \brief (USART2) LON Beta1 Tx Register */ | |
#define REG_USART2_LONB1RX (*(__IO uint32_t*)0x4002C078U) /**< \brief (USART2) LON Beta1 Rx Register */ | |
#define REG_USART2_LONPRIO (*(__IO uint32_t*)0x4002C07CU) /**< \brief (USART2) LON Priority Register */ | |
#define REG_USART2_IDTTX (*(__IO uint32_t*)0x4002C080U) /**< \brief (USART2) LON IDT Tx Register */ | |
#define REG_USART2_IDTRX (*(__IO uint32_t*)0x4002C084U) /**< \brief (USART2) LON IDT Rx Register */ | |
#define REG_USART2_ICDIFF (*(__IO uint32_t*)0x4002C088U) /**< \brief (USART2) IC DIFF Register */ | |
#define REG_USART2_WPMR (*(__IO uint32_t*)0x4002C0E4U) /**< \brief (USART2) Write Protection Mode Register */ | |
#define REG_USART2_WPSR (*(__I uint32_t*)0x4002C0E8U) /**< \brief (USART2) Write Protection Status Register */ | |
#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ | |
#endif /* _SAME70_USART2_INSTANCE_ */ |