/* ---------------------------------------------------------------------------- | |
* SAM Software Package License | |
* ---------------------------------------------------------------------------- | |
* Copyright (c) 2014, Atmel Corporation | |
* | |
* All rights reserved. | |
* | |
* Redistribution and use in source and binary forms, with or without | |
* modification, are permitted provided that the following conditions are met: | |
* | |
* - Redistributions of source code must retain the above copyright notice, | |
* this list of conditions and the disclaimer below. | |
* | |
* Atmel's name may not be used to endorse or promote products derived from | |
* this software without specific prior written permission. | |
* | |
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR | |
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF | |
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE | |
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, | |
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | |
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, | |
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF | |
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING | |
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, | |
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
* ---------------------------------------------------------------------------- | |
*/ | |
/** | |
* \addtogroup usart_dma_module USART xDMA driver | |
* \section Usage | |
* | |
* <ul> | |
* <li> USARTD_Configure() initializes and configures the USART peripheral | |
* and xDMA for data transfer.</li> | |
* <li> Configures the parameters for the device corresponding to the cs | |
* value by USARTD_ConfigureCS(). </li> | |
* </ul> | |
* | |
*/ | |
/** | |
* \file | |
* | |
* Implementation for the USART with xDMA driver. | |
* | |
*/ | |
/*---------------------------------------------------------------------------- | |
* Headers | |
*----------------------------------------------------------------------------*/ | |
#include "chip.h" | |
#include "string.h" | |
#include "stdlib.h" | |
/*---------------------------------------------------------------------------- | |
* Local functions | |
*----------------------------------------------------------------------------*/ | |
/** | |
* \brief USART xDMA Rx callback | |
* Invoked on USART DMA reception done. | |
* \param channel DMA channel. | |
* \param pArg Pointer to callback argument - Pointer to USARTDma instance. | |
*/ | |
static void USARTD_Rx_Cb(uint32_t channel, UsartDma* pArg) | |
{ | |
UsartChannel *pUsartdCh = pArg->pRxChannel; | |
if (channel != pUsartdCh->ChNum) | |
return; | |
/* Release the DMA channels */ | |
XDMAD_FreeChannel(pArg->pXdmad, pUsartdCh->ChNum); | |
pUsartdCh->dmaProgress = 1; | |
memory_barrier(); | |
} | |
/** | |
* \brief USART xDMA Rx callback | |
* Invoked on USART DMA reception done. | |
* \param channel DMA channel. | |
* \param pArg Pointer to callback argument - Pointer to USARTDma instance. | |
*/ | |
static void USARTD_Tx_Cb(uint32_t channel, UsartDma* pArg) | |
{ | |
UsartChannel *pUsartdCh = pArg->pTxChannel; | |
if (channel != pUsartdCh->ChNum) | |
return; | |
/* Release the DMA channels */ | |
XDMAD_FreeChannel(pArg->pXdmad, pUsartdCh->ChNum); | |
pUsartdCh->dmaProgress = 1; | |
memory_barrier(); | |
} | |
/** | |
* \brief Configure the USART Rx DMA Destination with Linker List mode. | |
* | |
* \param UsartChannel Pointer to USART dma channel | |
* \returns 0 if the dma multibuffer configuration successfully; otherwise | |
* returnsUSARTD_ERROR_XXX. | |
*/ | |
static uint8_t _configureRxDma(UsartDma *pUsart, UsartChannel *pUsartRx) | |
{ | |
sXdmadCfg xdmadRxCfg; | |
uint32_t xdmaCndc, xdmaInt; | |
uint32_t i, LLI_Size; | |
Usart *pUsartHwRx = pUsart->pUsartHw; | |
sXdmad* pXdmadRx = pUsart->pXdmad; | |
uint8_t *pBuff = 0; | |
/* Setup RX Single block */ | |
if(pUsartRx->dmaProgrammingMode < XDMAD_LLI) { | |
xdmadRxCfg.mbr_ubc = pUsartRx->BuffSize; | |
xdmadRxCfg.mbr_da = (uint32_t)pUsartRx->pBuff; | |
xdmadRxCfg.mbr_sa = (uint32_t)&pUsartHwRx->US_RHR; | |
xdmadRxCfg.mbr_cfg = XDMAC_CC_TYPE_PER_TRAN | | |
XDMAC_CC_MBSIZE_SIXTEEN | | |
XDMAC_CC_DSYNC_PER2MEM | | |
XDMAC_CC_CSIZE_CHK_1 | | |
XDMAC_CC_DWIDTH_BYTE | | |
XDMAC_CC_SIF_AHB_IF1 | | |
XDMAC_CC_DIF_AHB_IF0 | | |
XDMAC_CC_SAM_FIXED_AM | | |
XDMAC_CC_DAM_INCREMENTED_AM | | |
XDMAC_CC_PERID(XDMAIF_Get_ChannelNumber | |
( pUsart->usartId, XDMAD_TRANSFER_RX )); | |
xdmadRxCfg.mbr_bc = 0; | |
if(pUsartRx->dmaProgrammingMode == XDMAD_MULTI) | |
{ | |
xdmadRxCfg.mbr_bc = pUsartRx->dmaBlockSize; | |
} | |
xdmadRxCfg.mbr_sus = 0; | |
xdmadRxCfg.mbr_dus =0; | |
xdmaCndc = 0; | |
xdmaInt = (XDMAC_CIE_BIE | | |
XDMAC_CIE_DIE | | |
XDMAC_CIE_FIE | | |
XDMAC_CIE_RBIE | | |
XDMAC_CIE_WBIE | | |
XDMAC_CIE_ROIE); | |
} else if(pUsartRx->dmaProgrammingMode == XDMAD_LLI) { | |
/* Setup RX Link List */ | |
LLI_Size = pUsartRx->dmaBlockSize; | |
pBuff = pUsartRx->pBuff; | |
if(pUsartRx->pLLIview != NULL) | |
{ | |
free(pUsartRx->pLLIview); | |
pUsartRx->pLLIview = NULL; | |
} | |
pUsartRx->pLLIview = malloc(sizeof(LinkedListDescriporView1)*LLI_Size); | |
if( pUsartRx->pLLIview == NULL) { | |
TRACE_ERROR(" Can not allocate memory to Rx LLI"); | |
return USARTD_ERROR; | |
} | |
xdmadRxCfg.mbr_cfg = XDMAC_CC_TYPE_PER_TRAN | | |
XDMAC_CC_MBSIZE_SIXTEEN | | |
XDMAC_CC_DSYNC_PER2MEM | | |
XDMAC_CC_MEMSET_NORMAL_MODE | | |
XDMAC_CC_CSIZE_CHK_1 | | |
XDMAC_CC_DWIDTH_BYTE | | |
XDMAC_CC_SIF_AHB_IF1 | | |
XDMAC_CC_DIF_AHB_IF0 | | |
XDMAC_CC_SAM_FIXED_AM | | |
XDMAC_CC_DAM_INCREMENTED_AM | | |
XDMAC_CC_PERID(XDMAIF_Get_ChannelNumber | |
( pUsart->usartId, XDMAD_TRANSFER_RX )); | |
xdmadRxCfg.mbr_bc = 0; | |
for (i = 0; i < LLI_Size; i++) { | |
pUsartRx->pLLIview[i].mbr_ubc = XDMA_UBC_NVIEW_NDV1 | | |
XDMA_UBC_NSEN_UNCHANGED | | |
XDMA_UBC_NDEN_UPDATED | | |
((i== LLI_Size- 1)? ( | |
(pUsartRx->dmaRingBuffer)? | |
XDMA_UBC_NDE_FETCH_EN : 0): | |
XDMA_UBC_NDE_FETCH_EN) | | |
pUsartRx->BuffSize; | |
pUsartRx->pLLIview[i].mbr_sa = (uint32_t)&pUsartHwRx->US_RHR; | |
pUsartRx->pLLIview[i].mbr_da = (uint32_t)pBuff; | |
pUsartRx->pLLIview[i].mbr_nda = (i == ( LLI_Size - 1))? | |
( (pUsartRx->dmaRingBuffer)? (uint32_t)pUsartRx->pLLIview : 0 ) | |
:(uint32_t)&pUsartRx->pLLIview[ i + 1 ]; | |
pBuff += pUsartRx->BuffSize; | |
} | |
xdmaCndc = XDMAC_CNDC_NDVIEW_NDV1 | | |
XDMAC_CNDC_NDE_DSCR_FETCH_EN | | |
XDMAC_CNDC_NDSUP_SRC_PARAMS_UPDATED| | |
XDMAC_CNDC_NDDUP_DST_PARAMS_UPDATED ; | |
xdmaInt = ((pUsartRx->dmaRingBuffer)? XDMAC_CIE_BIE : XDMAC_CIE_LIE); | |
} else { | |
return 1; | |
} | |
memory_barrier(); | |
if (XDMAD_ConfigureTransfer( | |
pXdmadRx, pUsartRx->ChNum, &xdmadRxCfg, xdmaCndc, | |
(uint32_t)pUsartRx->pLLIview, xdmaInt)) | |
return USARTD_ERROR; | |
return 0; | |
} | |
/** | |
* \brief Configure the USART tx DMA source with Linker List mode. | |
* | |
* \param UsartChannel Pointer to USART dma channel | |
* \returns 0 if the dma multibuffer configuration successfully; otherwise returns | |
* USARTD_ERROR_XXX. | |
*/ | |
static uint8_t _configureTxDma(UsartDma *pUsart, UsartChannel *pUsartTx) | |
{ | |
sXdmadCfg xdmadTxCfg; | |
uint32_t xdmaCndc, xdmaInt, LLI_Size, i; | |
uint8_t *pBuff = 0; | |
Usart *pUsartHwTx = pUsart->pUsartHw; | |
sXdmad* pXdmadTx = pUsart->pXdmad; | |
/* Setup TX Link List */ | |
if(pUsartTx->dmaProgrammingMode < XDMAD_LLI) { | |
/* Number of Data */ | |
xdmadTxCfg.mbr_ubc = pUsartTx->BuffSize; | |
/* Source and Destination address of DMA */ | |
xdmadTxCfg.mbr_sa = (uint32_t)pUsartTx->pBuff; | |
xdmadTxCfg.mbr_da = (uint32_t)&pUsartHwTx->US_THR; | |
/* DMA Channel configuration */ | |
xdmadTxCfg.mbr_cfg = XDMAC_CC_TYPE_PER_TRAN | | |
XDMAC_CC_MBSIZE_SIXTEEN | | |
XDMAC_CC_DSYNC_MEM2PER | | |
XDMAC_CC_CSIZE_CHK_1 | | |
XDMAC_CC_DWIDTH_BYTE| | |
XDMAC_CC_SIF_AHB_IF0 | | |
XDMAC_CC_DIF_AHB_IF1 | | |
XDMAC_CC_SAM_INCREMENTED_AM | | |
XDMAC_CC_DAM_FIXED_AM | | |
XDMAC_CC_PERID(XDMAIF_Get_ChannelNumber | |
( pUsart->usartId, XDMAD_TRANSFER_TX )); | |
xdmadTxCfg.mbr_bc = 0; | |
if(pUsartTx->dmaProgrammingMode == XDMAD_MULTI) | |
{ | |
xdmadTxCfg.mbr_bc = pUsartTx->dmaBlockSize; | |
} | |
xdmadTxCfg.mbr_sus = 0; | |
xdmadTxCfg.mbr_dus =0; | |
xdmadTxCfg.mbr_ds= 0; | |
xdmaCndc = 0; | |
/* Enable End of Block; Read Bus error; Write Bus Error; | |
Overflow Error interrupt */ | |
xdmaInt = (XDMAC_CIE_BIE | | |
XDMAC_CIE_RBIE | | |
XDMAC_CIE_WBIE | | |
XDMAC_CIE_ROIE); | |
} else if(pUsartTx->dmaProgrammingMode == XDMAD_LLI) { | |
LLI_Size = pUsartTx->dmaBlockSize; | |
pBuff = pUsartTx->pBuff; | |
/* If channel's LLI is already configured and application | |
want to reconfigured it, free before re-allocating memory */ | |
if(pUsartTx->pLLIview != NULL) { | |
free(pUsartTx->pLLIview); | |
pUsartTx->pLLIview = NULL; | |
} | |
pUsartTx->pLLIview = malloc(sizeof(LinkedListDescriporView1)*LLI_Size); | |
if( pUsartTx->pLLIview == NULL) { | |
TRACE_ERROR(" Can not allocate memory to Tx LLI"); | |
return USARTD_ERROR; | |
} | |
xdmadTxCfg.mbr_cfg = XDMAC_CC_TYPE_PER_TRAN | | |
XDMAC_CC_MBSIZE_SIXTEEN | | |
XDMAC_CC_DSYNC_MEM2PER | | |
XDMAC_CC_MEMSET_NORMAL_MODE | | |
XDMAC_CC_CSIZE_CHK_1 | | |
XDMAC_CC_DWIDTH_BYTE | | |
XDMAC_CC_SIF_AHB_IF0 | | |
XDMAC_CC_DIF_AHB_IF1 | | |
XDMAC_CC_SAM_INCREMENTED_AM | | |
XDMAC_CC_DAM_FIXED_AM | | |
XDMAC_CC_PERID(XDMAIF_Get_ChannelNumber | |
( pUsart->usartId, XDMAD_TRANSFER_TX )); | |
xdmadTxCfg.mbr_bc = 0; | |
for (i = 0; i < LLI_Size; i++) { | |
pUsartTx->pLLIview[i].mbr_ubc = XDMA_UBC_NVIEW_NDV1 | | |
XDMA_UBC_NSEN_UPDATED | | |
XDMA_UBC_NDEN_UNCHANGED | | |
((i== LLI_Size- 1)? ( (pUsartTx->dmaRingBuffer) | |
? XDMA_UBC_NDE_FETCH_EN : 0): | |
XDMA_UBC_NDE_FETCH_EN) | pUsartTx->BuffSize; | |
pUsartTx->pLLIview[i].mbr_sa = (uint32_t)pBuff; | |
pUsartTx->pLLIview[i].mbr_da = (uint32_t)&pUsartHwTx->US_THR; | |
pUsartTx->pLLIview[i].mbr_nda = (i == ( LLI_Size - 1))? | |
( (pUsartTx->dmaRingBuffer)? (uint32_t)pUsartTx->pLLIview : 0 ) | |
:(uint32_t)&pUsartTx->pLLIview[ i + 1 ]; | |
pBuff += pUsartTx->BuffSize; | |
} | |
xdmaCndc = XDMAC_CNDC_NDVIEW_NDV1 | | |
XDMAC_CNDC_NDE_DSCR_FETCH_EN | | |
XDMAC_CNDC_NDSUP_SRC_PARAMS_UPDATED| | |
XDMAC_CNDC_NDDUP_DST_PARAMS_UPDATED ; | |
xdmaInt = ((pUsartTx->dmaRingBuffer)? XDMAC_CIE_BIE : XDMAC_CIE_LIE); | |
} else { | |
TRACE_ERROR("DmaProgState is incorrect \n\r"); | |
return 1; | |
} | |
memory_barrier(); | |
if (XDMAD_ConfigureTransfer( pXdmadTx, pUsartTx->ChNum, | |
&xdmadTxCfg, xdmaCndc, (uint32_t)pUsartTx->pLLIview, xdmaInt)) | |
return USARTD_ERROR; | |
return 0; | |
} | |
/*---------------------------------------------------------------------------- | |
* Exported functions | |
*----------------------------------------------------------------------------*/ | |
/** | |
* \brief Initializes the USARTDma structure and the corresponding USART & DMA . | |
* hardware select value. | |
* The driver will uses DMA channel 0 for RX and DMA channel 1 for TX. | |
* The DMA channels are freed automatically when no USART command processing. | |
* | |
* \param pUSARTD Pointer to a UsartDma instance. | |
* \param pUsartHw Associated USART peripheral. | |
* \param usartId USART peripheral identifier. | |
* \param UsartClk USART clock. | |
* \param pXdmad Pointer to a Dmad instance. | |
*/ | |
uint32_t USARTD_Configure( UsartDma *pUsartd , | |
uint8_t usartId, | |
uint32_t UsartMode, | |
uint32_t BaudRate, | |
uint32_t UsartClk) | |
{ | |
/* Enable the peripheral clock in the PMC*/ | |
PMC_EnablePeripheral( usartId ); | |
/* Initialize the USART structure */ | |
pUsartd->usartId = usartId; | |
if (usartId == ID_USART0) | |
pUsartd->pUsartHw = USART0; | |
if (usartId == ID_USART1) | |
pUsartd->pUsartHw = USART1; | |
if (usartId == ID_USART2) | |
pUsartd->pUsartHw = USART2; | |
pUsartd->pXdmad->pXdmacs = XDMAC; | |
/* Enable the USART Peripheral ,Execute a software reset of the USART, | |
Configure USART in Master Mode*/ | |
USART_Configure ( pUsartd->pUsartHw, UsartMode, BaudRate, UsartClk); | |
/* Driver initialize */ | |
XDMAD_Initialize( pUsartd->pXdmad, 0 ); | |
/* Check if DMA IRQ is enable; if not clear pending IRQs in init it */ | |
if(!(NVIC_GetActive(XDMAC_IRQn))) { | |
NVIC_ClearPendingIRQ(XDMAC_IRQn); | |
} | |
return 0; | |
} | |
/** | |
* \brief This function initialize the appropriate DMA channel for Rx channel | |
* of USART | |
* \param pUsartd Pointer to a UsartDma instance. | |
* \param pRxCh Pointer to TxChannel configuration | |
* \returns 0 if the transfer has been started successfully; | |
* otherwise returns USARTD_ERROR_LOCK is the driver is in use, or | |
* USARTD_ERROR if the command is not valid. | |
*/ | |
uint32_t USARTD_EnableRxChannels( UsartDma *pUsartd, UsartChannel *pRxCh) | |
{ | |
uint32_t Channel; | |
assert(pRxCh); | |
/* Init USART Rx Channel. */ | |
pUsartd->pRxChannel = pRxCh; | |
/* Enables the USART to receive data. */ | |
USART_SetReceiverEnabled ( pUsartd->pUsartHw , ENABLE); | |
/* Allocate a DMA channel for USART0/1 RX. */ | |
Channel = XDMAD_AllocateChannel( pUsartd->pXdmad, pUsartd->usartId, | |
XDMAD_TRANSFER_MEMORY); | |
if ( Channel == XDMAD_ALLOC_FAILED ) { | |
return USARTD_ERROR; | |
} | |
pRxCh->ChNum = Channel; | |
/* Setup callbacks for USART RX */ | |
if(pUsartd->pRxChannel->callback) { | |
XDMAD_SetCallback(pUsartd->pXdmad, pRxCh->ChNum, | |
(XdmadTransferCallback)pRxCh->callback, pRxCh->pArgument); | |
} else { | |
XDMAD_SetCallback(pUsartd->pXdmad, pRxCh->ChNum, | |
(XdmadTransferCallback)USARTD_Rx_Cb, pUsartd); | |
} | |
if (XDMAD_PrepareChannel( pUsartd->pXdmad, pRxCh->ChNum )) | |
return USARTD_ERROR; | |
if (_configureRxDma(pUsartd , pUsartd->pRxChannel)) | |
return USARTD_ERROR_LOCK; | |
/* Check if DMA IRQ is enable; if not Enable it */ | |
if(!(NVIC_GetActive(XDMAC_IRQn))) { | |
/* Enable interrupt */ | |
NVIC_EnableIRQ(XDMAC_IRQn); | |
} | |
return 0; | |
} | |
/** | |
* \brief This function initialize the appropriate DMA channel for Tx channel | |
* of USART | |
* \param pUsartd Pointer to a USARTDma instance. | |
* \param pTxCh Pointer to TxChannel configuration | |
* \returns 0 if the transfer has been started successfully; | |
* otherwise returns USARTD_ERROR_LOCK is the driver is in use, or | |
* USARTD_ERROR if the command is not valid. | |
*/ | |
uint32_t USARTD_EnableTxChannels( UsartDma *pUsartd, UsartChannel *pTxCh) | |
{ | |
uint32_t Channel; | |
assert(pTxCh); | |
/* Init USART Tx Channel. */ | |
pUsartd->pTxChannel = pTxCh; | |
/* Enables the USART to transfer data. */ | |
USART_SetTransmitterEnabled ( pUsartd->pUsartHw , ENABLE); | |
/* Allocate a DMA channel for USART0/1 TX. */ | |
Channel = XDMAD_AllocateChannel( pUsartd->pXdmad, XDMAD_TRANSFER_MEMORY, | |
pUsartd->usartId); | |
if ( Channel == XDMAD_ALLOC_FAILED ) { | |
return USARTD_ERROR; | |
} | |
pTxCh->ChNum = Channel; | |
/* Setup callbacks for USART0/1 TX */ | |
if(pUsartd->pTxChannel->callback) { | |
XDMAD_SetCallback(pUsartd->pXdmad, pTxCh->ChNum, | |
(XdmadTransferCallback)pTxCh->callback, pTxCh->pArgument); | |
} else { | |
XDMAD_SetCallback(pUsartd->pXdmad, pTxCh->ChNum, (XdmadTransferCallback)USARTD_Tx_Cb, pUsartd); | |
} | |
if ( XDMAD_PrepareChannel( pUsartd->pXdmad, pTxCh->ChNum )) | |
return USARTD_ERROR; | |
if (_configureTxDma(pUsartd , pUsartd->pTxChannel)) | |
return USARTD_ERROR_LOCK; | |
/* Check if DMA IRQ is enable; if not Enable it */ | |
if(!(NVIC_GetActive(XDMAC_IRQn))) { | |
/* Enable interrupt */ | |
NVIC_EnableIRQ(XDMAC_IRQn); | |
} | |
return 0; | |
} | |
/** | |
* \brief This function disables the appropriate DMA channel for Rx channel of | |
* USART | |
* \param pUsartd Pointer to a UsartDma instance. | |
* \param pRxCh Pointer to TxChannel configuration | |
* \returns 0 if the transfer has been started successfully; | |
* otherwise returns USARTD_ERROR_LOCK is the driver is in use, or | |
* USARTD_ERROR if the command is not valid. | |
*/ | |
uint32_t USARTD_DisableRxChannels( UsartDma *pUsartd, UsartChannel *pRxCh) | |
{ | |
assert(pRxCh); | |
/* Enables the USART to transfer data. */ | |
USART_SetReceiverEnabled ( pUsartd->pUsartHw , DISABLE); | |
XDMAD_StopTransfer(pUsartd->pXdmad, pRxCh->ChNum); | |
XDMAD_SetCallback(pUsartd->pXdmad, pRxCh->ChNum, NULL, NULL); | |
/* Free allocated DMA channel for USART TX. */ | |
if(XDMAD_FreeChannel( pUsartd->pXdmad, pRxCh->ChNum) != XDMAD_OK) { | |
return USARTD_ERROR; | |
} | |
if (pRxCh->dmaProgrammingMode == XDMAD_LLI) { | |
free(pRxCh->pLLIview); | |
pRxCh->pLLIview = NULL; | |
} | |
pRxCh->dmaProgress = 1; | |
memory_barrier(); | |
return 0; | |
} | |
/** | |
* \brief This function disables the appropriate DMA channel for Tx channel of | |
* USART | |
* \param pUsartd Pointer to a USARTDma instance. | |
* \param pTxCh Pointer to TxChannel configuration | |
* \returns 0 if the transfer has been started successfully; | |
* otherwise returns USARTD_ERROR_LOCK is the driver is in use, or | |
* USARTD_ERROR if the command is not valid. | |
*/ | |
uint32_t USARTD_DisableTxChannels( UsartDma *pUsartd, UsartChannel *pTxCh) | |
{ | |
assert(pTxCh); | |
/* Enables the USART to transfer data. */ | |
USART_SetTransmitterEnabled ( pUsartd->pUsartHw , DISABLE); | |
XDMAD_StopTransfer(pUsartd->pXdmad, pTxCh->ChNum); | |
XDMAD_SetCallback(pUsartd->pXdmad, pTxCh->ChNum, NULL, NULL); | |
/* Free allocated DMA channel for USART TX. */ | |
if(XDMAD_FreeChannel( pUsartd->pXdmad, pTxCh->ChNum) != XDMAD_OK) { | |
return USARTD_ERROR; | |
} | |
if (pTxCh->dmaProgrammingMode == XDMAD_LLI) { | |
free(pTxCh->pLLIview); | |
pTxCh->pLLIview = NULL; | |
} | |
pTxCh->dmaProgress = 1; | |
memory_barrier(); | |
return 0; | |
} | |
/** | |
* \brief Starts a USART master transfer. This is a non blocking function. It | |
* will return as soon as the transfer is started. | |
* | |
* \param pUSARTD Pointer to a USARTDma instance. | |
* \returns 0 if the transfer has been started successfully; otherwise returns | |
* USARTD_ERROR_LOCK is the driver is in use, or USARTD_ERROR if the command is | |
* not valid. | |
*/ | |
uint32_t USARTD_SendData( UsartDma *pUsartd) | |
{ | |
/* Start DMA 0(RX) && 1(TX) */ | |
SCB_CleanInvalidateDCache(); | |
pUsartd->pTxChannel->dmaProgress=0; | |
memory_barrier(); | |
if (XDMAD_StartTransfer( pUsartd->pXdmad, pUsartd->pTxChannel->ChNum )) | |
return USARTD_ERROR_LOCK; | |
return 0; | |
} | |
/** | |
* \brief Starts a USART master transfer. This is a non blocking function. It will | |
* return as soon as the transfer is started. | |
* | |
* \param pUSARTD Pointer to a USARTDma instance. | |
* \returns 0 if the transfer has been started successfully; otherwise returns | |
* USARTD_ERROR_LOCK is the driver is in use, or USARTD_ERROR if the command is not | |
* valid. | |
*/ | |
uint32_t USARTD_RcvData( UsartDma *pUsartd) | |
{ | |
/* Start DMA 0(RX) && 1(TX) */ | |
SCB_CleanInvalidateDCache(); | |
pUsartd->pRxChannel->dmaProgress=0; | |
memory_barrier(); | |
if (XDMAD_StartTransfer( pUsartd->pXdmad, pUsartd->pRxChannel->ChNum )) | |
return USARTD_ERROR_LOCK; | |
return 0; | |
} | |