| /* ---------------------------------------------------------------------------- | |
| * SAM Software Package License | |
| * ---------------------------------------------------------------------------- | |
| * Copyright (c) 2012, Atmel Corporation | |
| * | |
| * All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following condition is met: | |
| * | |
| * - Redistributions of source code must retain the above copyright notice, | |
| * this list of conditions and the disclaimer below. | |
| * | |
| * Atmel's name may not be used to endorse or promote products derived from | |
| * this software without specific prior written permission. | |
| * | |
| * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR | |
| * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF | |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE | |
| * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, | |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, | |
| * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF | |
| * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING | |
| * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, | |
| * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| * ---------------------------------------------------------------------------- | |
| */ | |
| #ifndef _SAMA5_USART_COMPONENT_ | |
| #define _SAMA5_USART_COMPONENT_ | |
| /* ============================================================================= */ | |
| /** SOFTWARE API DEFINITION FOR Universal Synchronous Asynchronous Receiver Transmitter */ | |
| /* ============================================================================= */ | |
| /** \addtogroup SAMA5_USART Universal Synchronous Asynchronous Receiver Transmitter */ | |
| /*@{*/ | |
| #if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) | |
| /** \brief Usart hardware registers */ | |
| typedef struct { | |
| WoReg US_CR; /**< \brief (Usart Offset: 0x0000) Control Register */ | |
| RwReg US_MR; /**< \brief (Usart Offset: 0x0004) Mode Register */ | |
| WoReg US_IER; /**< \brief (Usart Offset: 0x0008) Interrupt Enable Register */ | |
| WoReg US_IDR; /**< \brief (Usart Offset: 0x000C) Interrupt Disable Register */ | |
| RoReg US_IMR; /**< \brief (Usart Offset: 0x0010) Interrupt Mask Register */ | |
| RoReg US_CSR; /**< \brief (Usart Offset: 0x0014) Channel Status Register */ | |
| RoReg US_RHR; /**< \brief (Usart Offset: 0x0018) Receiver Holding Register */ | |
| WoReg US_THR; /**< \brief (Usart Offset: 0x001C) Transmitter Holding Register */ | |
| RwReg US_BRGR; /**< \brief (Usart Offset: 0x0020) Baud Rate Generator Register */ | |
| RwReg US_RTOR; /**< \brief (Usart Offset: 0x0024) Receiver Time-out Register */ | |
| RwReg US_TTGR; /**< \brief (Usart Offset: 0x0028) Transmitter Timeguard Register */ | |
| RoReg Reserved1[5]; | |
| RwReg US_FIDI; /**< \brief (Usart Offset: 0x0040) FI DI Ratio Register */ | |
| RoReg US_NER; /**< \brief (Usart Offset: 0x0044) Number of Errors Register */ | |
| RoReg Reserved2[1]; | |
| RwReg US_IF; /**< \brief (Usart Offset: 0x004C) IrDA Filter Register */ | |
| RwReg US_MAN; /**< \brief (Usart Offset: 0x0050) Manchester Encoder Decoder Register */ | |
| RoReg Reserved3[36]; | |
| RwReg US_WPMR; /**< \brief (Usart Offset: 0xE4) Write Protect Mode Register */ | |
| RoReg US_WPSR; /**< \brief (Usart Offset: 0xE8) Write Protect Status Register */ | |
| } Usart; | |
| #endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ | |
| /* -------- US_CR : (USART Offset: 0x0000) Control Register -------- */ | |
| #define US_CR_RSTRX (0x1u << 2) /**< \brief (US_CR) Reset Receiver */ | |
| #define US_CR_RSTTX (0x1u << 3) /**< \brief (US_CR) Reset Transmitter */ | |
| #define US_CR_RXEN (0x1u << 4) /**< \brief (US_CR) Receiver Enable */ | |
| #define US_CR_RXDIS (0x1u << 5) /**< \brief (US_CR) Receiver Disable */ | |
| #define US_CR_TXEN (0x1u << 6) /**< \brief (US_CR) Transmitter Enable */ | |
| #define US_CR_TXDIS (0x1u << 7) /**< \brief (US_CR) Transmitter Disable */ | |
| #define US_CR_RSTSTA (0x1u << 8) /**< \brief (US_CR) Reset Status Bits */ | |
| #define US_CR_STTBRK (0x1u << 9) /**< \brief (US_CR) Start Break */ | |
| #define US_CR_STPBRK (0x1u << 10) /**< \brief (US_CR) Stop Break */ | |
| #define US_CR_STTTO (0x1u << 11) /**< \brief (US_CR) Start Time-out */ | |
| #define US_CR_SENDA (0x1u << 12) /**< \brief (US_CR) Send Address */ | |
| #define US_CR_RSTIT (0x1u << 13) /**< \brief (US_CR) Reset Iterations */ | |
| #define US_CR_RSTNACK (0x1u << 14) /**< \brief (US_CR) Reset Non Acknowledge */ | |
| #define US_CR_RETTO (0x1u << 15) /**< \brief (US_CR) Rearm Time-out */ | |
| #define US_CR_RTSEN (0x1u << 18) /**< \brief (US_CR) Request to Send Enable */ | |
| #define US_CR_FCS (0x1u << 18) /**< \brief (US_CR) Force SPI Chip Select */ | |
| #define US_CR_RTSDIS (0x1u << 19) /**< \brief (US_CR) Request to Send Disable */ | |
| #define US_CR_RCS (0x1u << 19) /**< \brief (US_CR) Release SPI Chip Select */ | |
| /* -------- US_MR : (USART Offset: 0x0004) Mode Register -------- */ | |
| #define US_MR_USART_MODE_Pos 0 | |
| #define US_MR_USART_MODE_Msk (0xfu << US_MR_USART_MODE_Pos) /**< \brief (US_MR) */ | |
| #define US_MR_USART_MODE_NORMAL (0x0u << 0) /**< \brief (US_MR) Normal mode */ | |
| #define US_MR_USART_MODE_RS485 (0x1u << 0) /**< \brief (US_MR) RS485 */ | |
| #define US_MR_USART_MODE_HW_HANDSHAKING (0x2u << 0) /**< \brief (US_MR) Hardware Handshaking */ | |
| #define US_MR_USART_MODE_IS07816_T_0 (0x4u << 0) /**< \brief (US_MR) IS07816 Protocol: T = 0 */ | |
| #define US_MR_USART_MODE_IS07816_T_1 (0x6u << 0) /**< \brief (US_MR) IS07816 Protocol: T = 1 */ | |
| #define US_MR_USART_MODE_IRDA (0x8u << 0) /**< \brief (US_MR) IrDA */ | |
| #define US_MR_USART_MODE_SPI_MASTER (0xEu << 0) /**< \brief (US_MR) SPI Master */ | |
| #define US_MR_USART_MODE_SPI_SLAVE (0xFu << 0) /**< \brief (US_MR) SPI Slave */ | |
| #define US_MR_USCLKS_Pos 4 | |
| #define US_MR_USCLKS_Msk (0x3u << US_MR_USCLKS_Pos) /**< \brief (US_MR) Clock Selection */ | |
| #define US_MR_USCLKS_MCK (0x0u << 4) /**< \brief (US_MR) Master Clock MCK is selected */ | |
| #define US_MR_USCLKS_DIV (0x1u << 4) /**< \brief (US_MR) Internal Clock Divided MCK/DIV (DIV=(DIV=8)) is selected */ | |
| #define US_MR_USCLKS_SCK (0x3u << 4) /**< \brief (US_MR) Serial Clock SLK is selected */ | |
| #define US_MR_CHRL_Pos 6 | |
| #define US_MR_CHRL_Msk (0x3u << US_MR_CHRL_Pos) /**< \brief (US_MR) Character Length. */ | |
| #define US_MR_CHRL_5_BIT (0x0u << 6) /**< \brief (US_MR) Character length is 5 bits */ | |
| #define US_MR_CHRL_6_BIT (0x1u << 6) /**< \brief (US_MR) Character length is 6 bits */ | |
| #define US_MR_CHRL_7_BIT (0x2u << 6) /**< \brief (US_MR) Character length is 7 bits */ | |
| #define US_MR_CHRL_8_BIT (0x3u << 6) /**< \brief (US_MR) Character length is 8 bits */ | |
| #define US_MR_SYNC (0x1u << 8) /**< \brief (US_MR) Synchronous Mode Select */ | |
| #define US_MR_CPHA (0x1u << 8) /**< \brief (US_MR) SPI Clock Phase */ | |
| #define US_MR_PAR_Pos 9 | |
| #define US_MR_PAR_Msk (0x7u << US_MR_PAR_Pos) /**< \brief (US_MR) Parity Type */ | |
| #define US_MR_PAR_EVEN (0x0u << 9) /**< \brief (US_MR) Even parity */ | |
| #define US_MR_PAR_ODD (0x1u << 9) /**< \brief (US_MR) Odd parity */ | |
| #define US_MR_PAR_SPACE (0x2u << 9) /**< \brief (US_MR) Parity forced to 0 (Space) */ | |
| #define US_MR_PAR_MARK (0x3u << 9) /**< \brief (US_MR) Parity forced to 1 (Mark) */ | |
| #define US_MR_PAR_NO (0x4u << 9) /**< \brief (US_MR) No parity */ | |
| #define US_MR_PAR_MULTIDROP (0x6u << 9) /**< \brief (US_MR) Multidrop mode */ | |
| #define US_MR_NBSTOP_Pos 12 | |
| #define US_MR_NBSTOP_Msk (0x3u << US_MR_NBSTOP_Pos) /**< \brief (US_MR) Number of Stop Bits */ | |
| #define US_MR_NBSTOP_1_BIT (0x0u << 12) /**< \brief (US_MR) 1 stop bit */ | |
| #define US_MR_NBSTOP_1_5_BIT (0x1u << 12) /**< \brief (US_MR) 1.5 stop bit (SYNC = 0) or reserved (SYNC = 1) */ | |
| #define US_MR_NBSTOP_2_BIT (0x2u << 12) /**< \brief (US_MR) 2 stop bits */ | |
| #define US_MR_CHMODE_Pos 14 | |
| #define US_MR_CHMODE_Msk (0x3u << US_MR_CHMODE_Pos) /**< \brief (US_MR) Channel Mode */ | |
| #define US_MR_CHMODE_NORMAL (0x0u << 14) /**< \brief (US_MR) Normal Mode */ | |
| #define US_MR_CHMODE_AUTOMATIC (0x1u << 14) /**< \brief (US_MR) Automatic Echo. Receiver input is connected to the TXD pin. */ | |
| #define US_MR_CHMODE_LOCAL_LOOPBACK (0x2u << 14) /**< \brief (US_MR) Local Loopback. Transmitter output is connected to the Receiver Input. */ | |
| #define US_MR_CHMODE_REMOTE_LOOPBACK (0x3u << 14) /**< \brief (US_MR) Remote Loopback. RXD pin is internally connected to the TXD pin. */ | |
| #define US_MR_MSBF (0x1u << 16) /**< \brief (US_MR) Bit Order */ | |
| #define US_MR_CPOL (0x1u << 16) /**< \brief (US_MR) SPI Clock Polarity */ | |
| #define US_MR_MODE9 (0x1u << 17) /**< \brief (US_MR) 9-bit Character Length */ | |
| #define US_MR_CLKO (0x1u << 18) /**< \brief (US_MR) Clock Output Select */ | |
| #define US_MR_OVER (0x1u << 19) /**< \brief (US_MR) Oversampling Mode */ | |
| #define US_MR_INACK (0x1u << 20) /**< \brief (US_MR) Inhibit Non Acknowledge */ | |
| #define US_MR_DSNACK (0x1u << 21) /**< \brief (US_MR) Disable Successive NACK */ | |
| #define US_MR_VAR_SYNC (0x1u << 22) /**< \brief (US_MR) Variable Synchronization of Command/Data Sync Start Frame Delimiter */ | |
| #define US_MR_INVDATA (0x1u << 23) /**< \brief (US_MR) INverted Data */ | |
| #define US_MR_MAX_ITERATION_Pos 24 | |
| #define US_MR_MAX_ITERATION_Msk (0x7u << US_MR_MAX_ITERATION_Pos) /**< \brief (US_MR) */ | |
| #define US_MR_MAX_ITERATION(value) ((US_MR_MAX_ITERATION_Msk & ((value) << US_MR_MAX_ITERATION_Pos))) | |
| #define US_MR_FILTER (0x1u << 28) /**< \brief (US_MR) Infrared Receive Line Filter */ | |
| #define US_MR_MAN (0x1u << 29) /**< \brief (US_MR) Manchester Encoder/Decoder Enable */ | |
| #define US_MR_MODSYNC (0x1u << 30) /**< \brief (US_MR) Manchester Synchronization Mode */ | |
| #define US_MR_ONEBIT (0x1u << 31) /**< \brief (US_MR) Start Frame Delimiter Selector */ | |
| /* -------- US_IER : (USART Offset: 0x0008) Interrupt Enable Register -------- */ | |
| #define US_IER_RXRDY (0x1u << 0) /**< \brief (US_IER) RXRDY Interrupt Enable */ | |
| #define US_IER_TXRDY (0x1u << 1) /**< \brief (US_IER) TXRDY Interrupt Enable */ | |
| #define US_IER_RXBRK (0x1u << 2) /**< \brief (US_IER) Receiver Break Interrupt Enable */ | |
| #define US_IER_OVRE (0x1u << 5) /**< \brief (US_IER) Overrun Error Interrupt Enable */ | |
| #define US_IER_FRAME (0x1u << 6) /**< \brief (US_IER) Framing Error Interrupt Enable */ | |
| #define US_IER_PARE (0x1u << 7) /**< \brief (US_IER) Parity Error Interrupt Enable */ | |
| #define US_IER_TIMEOUT (0x1u << 8) /**< \brief (US_IER) Time-out Interrupt Enable */ | |
| #define US_IER_TXEMPTY (0x1u << 9) /**< \brief (US_IER) TXEMPTY Interrupt Enable */ | |
| #define US_IER_ITER (0x1u << 10) /**< \brief (US_IER) Max number of Repetitions Reached */ | |
| #define US_IER_UNRE (0x1u << 10) /**< \brief (US_IER) SPI Underrun Error */ | |
| #define US_IER_NACK (0x1u << 13) /**< \brief (US_IER) Non AcknowledgeInterrupt Enable */ | |
| #define US_IER_CTSIC (0x1u << 19) /**< \brief (US_IER) Clear to Send Input Change Interrupt Enable */ | |
| #define US_IER_MANE (0x1u << 24) /**< \brief (US_IER) Manchester Error or Interrupt Enable */ | |
| /* -------- US_IDR : (USART Offset: 0x000C) Interrupt Disable Register -------- */ | |
| #define US_IDR_RXRDY (0x1u << 0) /**< \brief (US_IDR) RXRDY Interrupt Disable */ | |
| #define US_IDR_TXRDY (0x1u << 1) /**< \brief (US_IDR) TXRDY Interrupt Disable */ | |
| #define US_IDR_RXBRK (0x1u << 2) /**< \brief (US_IDR) Receiver Break Interrupt Disable */ | |
| #define US_IDR_OVRE (0x1u << 5) /**< \brief (US_IDR) Overrun Error Interrupt Disable */ | |
| #define US_IDR_FRAME (0x1u << 6) /**< \brief (US_IDR) Framing Error Interrupt Disable */ | |
| #define US_IDR_PARE (0x1u << 7) /**< \brief (US_IDR) Parity Error Interrupt Disable */ | |
| #define US_IDR_TIMEOUT (0x1u << 8) /**< \brief (US_IDR) Time-out Interrupt Disable */ | |
| #define US_IDR_TXEMPTY (0x1u << 9) /**< \brief (US_IDR) TXEMPTY Interrupt Disable */ | |
| #define US_IDR_ITER (0x1u << 10) /**< \brief (US_IDR) Max number of Repetitions Reached Disable */ | |
| #define US_IDR_UNRE (0x1u << 10) /**< \brief (US_IDR) SPI Underrun Error Disable */ | |
| #define US_IDR_NACK (0x1u << 13) /**< \brief (US_IDR) Non AcknowledgeInterrupt Disable */ | |
| #define US_IDR_CTSIC (0x1u << 19) /**< \brief (US_IDR) Clear to Send Input Change Interrupt Disable */ | |
| #define US_IDR_MANE (0x1u << 24) /**< \brief (US_IDR) Manchester Error or Interrupt Disable */ | |
| /* -------- US_IMR : (USART Offset: 0x0010) Interrupt Mask Register -------- */ | |
| #define US_IMR_RXRDY (0x1u << 0) /**< \brief (US_IMR) RXRDY Interrupt Mask */ | |
| #define US_IMR_TXRDY (0x1u << 1) /**< \brief (US_IMR) TXRDY Interrupt Mask */ | |
| #define US_IMR_RXBRK (0x1u << 2) /**< \brief (US_IMR) Receiver Break Interrupt Mask */ | |
| #define US_IMR_OVRE (0x1u << 5) /**< \brief (US_IMR) Overrun Error Interrupt Mask */ | |
| #define US_IMR_FRAME (0x1u << 6) /**< \brief (US_IMR) Framing Error Interrupt Mask */ | |
| #define US_IMR_PARE (0x1u << 7) /**< \brief (US_IMR) Parity Error Interrupt Mask */ | |
| #define US_IMR_TIMEOUT (0x1u << 8) /**< \brief (US_IMR) Time-out Interrupt Mask */ | |
| #define US_IMR_TXEMPTY (0x1u << 9) /**< \brief (US_IMR) TXEMPTY Interrupt Mask */ | |
| #define US_IMR_ITER (0x1u << 10) /**< \brief (US_IMR) Max number of Repetitions Reached Mask */ | |
| #define US_IMR_UNRE (0x1u << 10) /**< \brief (US_IMR) SPI Underrun Error Mask */ | |
| #define US_IMR_NACK (0x1u << 13) /**< \brief (US_IMR) Non AcknowledgeInterrupt Mask */ | |
| #define US_IMR_CTSIC (0x1u << 19) /**< \brief (US_IMR) Clear to Send Input Change Interrupt Mask */ | |
| #define US_IMR_MANE (0x1u << 24) /**< \brief (US_IMR) Manchester Error or Interrupt Mask */ | |
| /* -------- US_CSR : (USART Offset: 0x0014) Channel Status Register -------- */ | |
| #define US_CSR_RXRDY (0x1u << 0) /**< \brief (US_CSR) Receiver Ready */ | |
| #define US_CSR_TXRDY (0x1u << 1) /**< \brief (US_CSR) Transmitter Ready */ | |
| #define US_CSR_RXBRK (0x1u << 2) /**< \brief (US_CSR) Break Received/End of Break */ | |
| #define US_CSR_OVRE (0x1u << 5) /**< \brief (US_CSR) Overrun Error */ | |
| #define US_CSR_FRAME (0x1u << 6) /**< \brief (US_CSR) Framing Error */ | |
| #define US_CSR_PARE (0x1u << 7) /**< \brief (US_CSR) Parity Error */ | |
| #define US_CSR_TIMEOUT (0x1u << 8) /**< \brief (US_CSR) Receiver Time-out */ | |
| #define US_CSR_TXEMPTY (0x1u << 9) /**< \brief (US_CSR) Transmitter Empty */ | |
| #define US_CSR_ITER (0x1u << 10) /**< \brief (US_CSR) Max number of Repetitions Reached */ | |
| #define US_CSR_UNRE (0x1u << 10) /**< \brief (US_CSR) Underrun Error */ | |
| #define US_CSR_NACK (0x1u << 13) /**< \brief (US_CSR) Non AcknowledgeInterrupt */ | |
| #define US_CSR_CTSIC (0x1u << 19) /**< \brief (US_CSR) Clear to Send Input Change Flag */ | |
| #define US_CSR_CTS (0x1u << 23) /**< \brief (US_CSR) Image of CTS Input */ | |
| #define US_CSR_MANERR (0x1u << 24) /**< \brief (US_CSR) Manchester Error or */ | |
| /* -------- US_RHR : (USART Offset: 0x0018) Receiver Holding Register -------- */ | |
| #define US_RHR_RXCHR_Pos 0 | |
| #define US_RHR_RXCHR_Msk (0x1ffu << US_RHR_RXCHR_Pos) /**< \brief (US_RHR) Received Character */ | |
| #define US_RHR_RXSYNH (0x1u << 15) /**< \brief (US_RHR) Received Sync */ | |
| /* -------- US_THR : (USART Offset: 0x001C) Transmitter Holding Register -------- */ | |
| #define US_THR_TXCHR_Pos 0 | |
| #define US_THR_TXCHR_Msk (0x1ffu << US_THR_TXCHR_Pos) /**< \brief (US_THR) Character to be Transmitted */ | |
| #define US_THR_TXCHR(value) ((US_THR_TXCHR_Msk & ((value) << US_THR_TXCHR_Pos))) | |
| #define US_THR_TXSYNH (0x1u << 15) /**< \brief (US_THR) Sync Field to be transmitted */ | |
| /* -------- US_BRGR : (USART Offset: 0x0020) Baud Rate Generator Register -------- */ | |
| #define US_BRGR_CD_Pos 0 | |
| #define US_BRGR_CD_Msk (0xffffu << US_BRGR_CD_Pos) /**< \brief (US_BRGR) Clock Divider */ | |
| #define US_BRGR_CD(value) ((US_BRGR_CD_Msk & ((value) << US_BRGR_CD_Pos))) | |
| #define US_BRGR_FP_Pos 16 | |
| #define US_BRGR_FP_Msk (0x7u << US_BRGR_FP_Pos) /**< \brief (US_BRGR) Fractional Part */ | |
| #define US_BRGR_FP(value) ((US_BRGR_FP_Msk & ((value) << US_BRGR_FP_Pos))) | |
| /* -------- US_RTOR : (USART Offset: 0x0024) Receiver Time-out Register -------- */ | |
| #define US_RTOR_TO_Pos 0 | |
| #define US_RTOR_TO_Msk (0xffffu << US_RTOR_TO_Pos) /**< \brief (US_RTOR) Time-out Value */ | |
| #define US_RTOR_TO(value) ((US_RTOR_TO_Msk & ((value) << US_RTOR_TO_Pos))) | |
| /* -------- US_TTGR : (USART Offset: 0x0028) Transmitter Timeguard Register -------- */ | |
| #define US_TTGR_TG_Pos 0 | |
| #define US_TTGR_TG_Msk (0xffu << US_TTGR_TG_Pos) /**< \brief (US_TTGR) Timeguard Value */ | |
| #define US_TTGR_TG(value) ((US_TTGR_TG_Msk & ((value) << US_TTGR_TG_Pos))) | |
| /* -------- US_FIDI : (USART Offset: 0x0040) FI DI Ratio Register -------- */ | |
| #define US_FIDI_FI_DI_RATIO_Pos 0 | |
| #define US_FIDI_FI_DI_RATIO_Msk (0x7ffu << US_FIDI_FI_DI_RATIO_Pos) /**< \brief (US_FIDI) FI Over DI Ratio Value */ | |
| #define US_FIDI_FI_DI_RATIO(value) ((US_FIDI_FI_DI_RATIO_Msk & ((value) << US_FIDI_FI_DI_RATIO_Pos))) | |
| /* -------- US_NER : (USART Offset: 0x0044) Number of Errors Register -------- */ | |
| #define US_NER_NB_ERRORS_Pos 0 | |
| #define US_NER_NB_ERRORS_Msk (0xffu << US_NER_NB_ERRORS_Pos) /**< \brief (US_NER) Number of Errors */ | |
| /* -------- US_IF : (USART Offset: 0x004C) IrDA Filter Register -------- */ | |
| #define US_IF_IRDA_FILTER_Pos 0 | |
| #define US_IF_IRDA_FILTER_Msk (0xffu << US_IF_IRDA_FILTER_Pos) /**< \brief (US_IF) IrDA Filter */ | |
| #define US_IF_IRDA_FILTER(value) ((US_IF_IRDA_FILTER_Msk & ((value) << US_IF_IRDA_FILTER_Pos))) | |
| /* -------- US_MAN : (USART Offset: 0x0050) Manchester Encoder Decoder Register -------- */ | |
| #define US_MAN_TX_PL_Pos 0 | |
| #define US_MAN_TX_PL_Msk (0xfu << US_MAN_TX_PL_Pos) /**< \brief (US_MAN) Transmitter Preamble Length */ | |
| #define US_MAN_TX_PL(value) ((US_MAN_TX_PL_Msk & ((value) << US_MAN_TX_PL_Pos))) | |
| #define US_MAN_TX_PP_Pos 8 | |
| #define US_MAN_TX_PP_Msk (0x3u << US_MAN_TX_PP_Pos) /**< \brief (US_MAN) Transmitter Preamble Pattern */ | |
| #define US_MAN_TX_PP_ALL_ONE (0x0u << 8) /**< \brief (US_MAN) The preamble is composed of '1's */ | |
| #define US_MAN_TX_PP_ALL_ZERO (0x1u << 8) /**< \brief (US_MAN) The preamble is composed of '0's */ | |
| #define US_MAN_TX_PP_ZERO_ONE (0x2u << 8) /**< \brief (US_MAN) The preamble is composed of '01's */ | |
| #define US_MAN_TX_PP_ONE_ZERO (0x3u << 8) /**< \brief (US_MAN) The preamble is composed of '10's */ | |
| #define US_MAN_TX_MPOL (0x1u << 12) /**< \brief (US_MAN) Transmitter Manchester Polarity */ | |
| #define US_MAN_RX_PL_Pos 16 | |
| #define US_MAN_RX_PL_Msk (0xfu << US_MAN_RX_PL_Pos) /**< \brief (US_MAN) Receiver Preamble Length */ | |
| #define US_MAN_RX_PL(value) ((US_MAN_RX_PL_Msk & ((value) << US_MAN_RX_PL_Pos))) | |
| #define US_MAN_RX_PP_Pos 24 | |
| #define US_MAN_RX_PP_Msk (0x3u << US_MAN_RX_PP_Pos) /**< \brief (US_MAN) Receiver Preamble Pattern detected */ | |
| #define US_MAN_RX_PP_ALL_ONE (0x0u << 24) /**< \brief (US_MAN) The preamble is composed of '1's */ | |
| #define US_MAN_RX_PP_ALL_ZERO (0x1u << 24) /**< \brief (US_MAN) The preamble is composed of '0's */ | |
| #define US_MAN_RX_PP_ZERO_ONE (0x2u << 24) /**< \brief (US_MAN) The preamble is composed of '01's */ | |
| #define US_MAN_RX_PP_ONE_ZERO (0x3u << 24) /**< \brief (US_MAN) The preamble is composed of '10's */ | |
| #define US_MAN_RX_MPOL (0x1u << 28) /**< \brief (US_MAN) Receiver Manchester Polarity */ | |
| #define US_MAN_ONE (0x1u << 29) /**< \brief (US_MAN) Must Be Set to 1 */ | |
| #define US_MAN_DRIFT (0x1u << 30) /**< \brief (US_MAN) Drift compensation */ | |
| /* -------- US_WPMR : (USART Offset: 0xE4) Write Protect Mode Register -------- */ | |
| #define US_WPMR_WPEN (0x1u << 0) /**< \brief (US_WPMR) Write Protect Enable */ | |
| #define US_WPMR_WPKEY_Pos 8 | |
| #define US_WPMR_WPKEY_Msk (0xffffffu << US_WPMR_WPKEY_Pos) /**< \brief (US_WPMR) Write Protect KEY */ | |
| #define US_WPMR_WPKEY(value) ((US_WPMR_WPKEY_Msk & ((value) << US_WPMR_WPKEY_Pos))) | |
| /* -------- US_WPSR : (USART Offset: 0xE8) Write Protect Status Register -------- */ | |
| #define US_WPSR_WPVS (0x1u << 0) /**< \brief (US_WPSR) Write Protect Violation Status */ | |
| #define US_WPSR_WPVSRC_Pos 8 | |
| #define US_WPSR_WPVSRC_Msk (0xffffu << US_WPSR_WPVSRC_Pos) /**< \brief (US_WPSR) Write Protect Violation Source */ | |
| /*@}*/ | |
| #endif /* _SAMA5_USART_COMPONENT_ */ |