| /****************************************************************************** |
| * |
| * Copyright (C) 2002 - 2015 Xilinx, Inc. All rights reserved. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * Use of the Software is limited solely to applications: |
| * (a) running on a Xilinx device, or |
| * (b) that interact with a Xilinx device through a bus or interconnect. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF |
| * OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
| * SOFTWARE. |
| * |
| * Except as contained in this notice, the name of the Xilinx shall not be used |
| * in advertising or otherwise to promote the sale, use or other dealings in |
| * this Software without prior written authorization from Xilinx. |
| * |
| ******************************************************************************/ |
| /*****************************************************************************/ |
| /** |
| * |
| * @file xstatus.h |
| * |
| * This file contains Xilinx software status codes. Status codes have their |
| * own data type called int. These codes are used throughout the Xilinx |
| * device drivers. |
| * |
| ******************************************************************************/ |
| |
| #ifndef XSTATUS_H /* prevent circular inclusions */ |
| #define XSTATUS_H /* by using protection macros */ |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /***************************** Include Files *********************************/ |
| |
| #include "xil_types.h" |
| #include "xil_assert.h" |
| |
| /************************** Constant Definitions *****************************/ |
| |
| /*********************** Common statuses 0 - 500 *****************************/ |
| |
| #define XST_SUCCESS 0L |
| #define XST_FAILURE 1L |
| #define XST_DEVICE_NOT_FOUND 2L |
| #define XST_DEVICE_BLOCK_NOT_FOUND 3L |
| #define XST_INVALID_VERSION 4L |
| #define XST_DEVICE_IS_STARTED 5L |
| #define XST_DEVICE_IS_STOPPED 6L |
| #define XST_FIFO_ERROR 7L /* an error occurred during an |
| operation with a FIFO such as |
| an underrun or overrun, this |
| error requires the device to |
| be reset */ |
| #define XST_RESET_ERROR 8L /* an error occurred which requires |
| the device to be reset */ |
| #define XST_DMA_ERROR 9L /* a DMA error occurred, this error |
| typically requires the device |
| using the DMA to be reset */ |
| #define XST_NOT_POLLED 10L /* the device is not configured for |
| polled mode operation */ |
| #define XST_FIFO_NO_ROOM 11L /* a FIFO did not have room to put |
| the specified data into */ |
| #define XST_BUFFER_TOO_SMALL 12L /* the buffer is not large enough |
| to hold the expected data */ |
| #define XST_NO_DATA 13L /* there was no data available */ |
| #define XST_REGISTER_ERROR 14L /* a register did not contain the |
| expected value */ |
| #define XST_INVALID_PARAM 15L /* an invalid parameter was passed |
| into the function */ |
| #define XST_NOT_SGDMA 16L /* the device is not configured for |
| scatter-gather DMA operation */ |
| #define XST_LOOPBACK_ERROR 17L /* a loopback test failed */ |
| #define XST_NO_CALLBACK 18L /* a callback has not yet been |
| registered */ |
| #define XST_NO_FEATURE 19L /* device is not configured with |
| the requested feature */ |
| #define XST_NOT_INTERRUPT 20L /* device is not configured for |
| interrupt mode operation */ |
| #define XST_DEVICE_BUSY 21L /* device is busy */ |
| #define XST_ERROR_COUNT_MAX 22L /* the error counters of a device |
| have maxed out */ |
| #define XST_IS_STARTED 23L /* used when part of device is |
| already started i.e. |
| sub channel */ |
| #define XST_IS_STOPPED 24L /* used when part of device is |
| already stopped i.e. |
| sub channel */ |
| #define XST_DATA_LOST 26L /* driver defined error */ |
| #define XST_RECV_ERROR 27L /* generic receive error */ |
| #define XST_SEND_ERROR 28L /* generic transmit error */ |
| #define XST_NOT_ENABLED 29L /* a requested service is not |
| available because it has not |
| been enabled */ |
| |
| /***************** Utility Component statuses 401 - 500 *********************/ |
| |
| #define XST_MEMTEST_FAILED 401L /* memory test failed */ |
| |
| |
| /***************** Common Components statuses 501 - 1000 *********************/ |
| |
| /********************* Packet Fifo statuses 501 - 510 ************************/ |
| |
| #define XST_PFIFO_LACK_OF_DATA 501L /* not enough data in FIFO */ |
| #define XST_PFIFO_NO_ROOM 502L /* not enough room in FIFO */ |
| #define XST_PFIFO_BAD_REG_VALUE 503L /* self test, a register value |
| was invalid after reset */ |
| #define XST_PFIFO_ERROR 504L /* generic packet FIFO error */ |
| #define XST_PFIFO_DEADLOCK 505L /* packet FIFO is reporting |
| * empty and full simultaneously |
| */ |
| |
| /************************** DMA statuses 511 - 530 ***************************/ |
| |
| #define XST_DMA_TRANSFER_ERROR 511L /* self test, DMA transfer |
| failed */ |
| #define XST_DMA_RESET_REGISTER_ERROR 512L /* self test, a register value |
| was invalid after reset */ |
| #define XST_DMA_SG_LIST_EMPTY 513L /* scatter gather list contains |
| no buffer descriptors ready |
| to be processed */ |
| #define XST_DMA_SG_IS_STARTED 514L /* scatter gather not stopped */ |
| #define XST_DMA_SG_IS_STOPPED 515L /* scatter gather not running */ |
| #define XST_DMA_SG_LIST_FULL 517L /* all the buffer desciptors of |
| the scatter gather list are |
| being used */ |
| #define XST_DMA_SG_BD_LOCKED 518L /* the scatter gather buffer |
| descriptor which is to be |
| copied over in the scatter |
| list is locked */ |
| #define XST_DMA_SG_NOTHING_TO_COMMIT 519L /* no buffer descriptors have been |
| put into the scatter gather |
| list to be commited */ |
| #define XST_DMA_SG_COUNT_EXCEEDED 521L /* the packet count threshold |
| specified was larger than the |
| total # of buffer descriptors |
| in the scatter gather list */ |
| #define XST_DMA_SG_LIST_EXISTS 522L /* the scatter gather list has |
| already been created */ |
| #define XST_DMA_SG_NO_LIST 523L /* no scatter gather list has |
| been created */ |
| #define XST_DMA_SG_BD_NOT_COMMITTED 524L /* the buffer descriptor which was |
| being started was not committed |
| to the list */ |
| #define XST_DMA_SG_NO_DATA 525L /* the buffer descriptor to start |
| has already been used by the |
| hardware so it can't be reused |
| */ |
| #define XST_DMA_SG_LIST_ERROR 526L /* general purpose list access |
| error */ |
| #define XST_DMA_BD_ERROR 527L /* general buffer descriptor |
| error */ |
| |
| /************************** IPIF statuses 531 - 550 ***************************/ |
| |
| #define XST_IPIF_REG_WIDTH_ERROR 531L /* an invalid register width |
| was passed into the function */ |
| #define XST_IPIF_RESET_REGISTER_ERROR 532L /* the value of a register at |
| reset was not valid */ |
| #define XST_IPIF_DEVICE_STATUS_ERROR 533L /* a write to the device interrupt |
| status register did not read |
| back correctly */ |
| #define XST_IPIF_DEVICE_ACK_ERROR 534L /* the device interrupt status |
| register did not reset when |
| acked */ |
| #define XST_IPIF_DEVICE_ENABLE_ERROR 535L /* the device interrupt enable |
| register was not updated when |
| other registers changed */ |
| #define XST_IPIF_IP_STATUS_ERROR 536L /* a write to the IP interrupt |
| status register did not read |
| back correctly */ |
| #define XST_IPIF_IP_ACK_ERROR 537L /* the IP interrupt status register |
| did not reset when acked */ |
| #define XST_IPIF_IP_ENABLE_ERROR 538L /* IP interrupt enable register was |
| not updated correctly when other |
| registers changed */ |
| #define XST_IPIF_DEVICE_PENDING_ERROR 539L /* The device interrupt pending |
| register did not indicate the |
| expected value */ |
| #define XST_IPIF_DEVICE_ID_ERROR 540L /* The device interrupt ID register |
| did not indicate the expected |
| value */ |
| #define XST_IPIF_ERROR 541L /* generic ipif error */ |
| |
| /****************** Device specific statuses 1001 - 4095 *********************/ |
| |
| /********************* Ethernet statuses 1001 - 1050 *************************/ |
| |
| #define XST_EMAC_MEMORY_SIZE_ERROR 1001L /* Memory space is not big enough |
| * to hold the minimum number of |
| * buffers or descriptors */ |
| #define XST_EMAC_MEMORY_ALLOC_ERROR 1002L /* Memory allocation failed */ |
| #define XST_EMAC_MII_READ_ERROR 1003L /* MII read error */ |
| #define XST_EMAC_MII_BUSY 1004L /* An MII operation is in progress */ |
| #define XST_EMAC_OUT_OF_BUFFERS 1005L /* Driver is out of buffers */ |
| #define XST_EMAC_PARSE_ERROR 1006L /* Invalid driver init string */ |
| #define XST_EMAC_COLLISION_ERROR 1007L /* Excess deferral or late |
| * collision on polled send */ |
| |
| /*********************** UART statuses 1051 - 1075 ***************************/ |
| #define XST_UART |
| |
| #define XST_UART_INIT_ERROR 1051L |
| #define XST_UART_START_ERROR 1052L |
| #define XST_UART_CONFIG_ERROR 1053L |
| #define XST_UART_TEST_FAIL 1054L |
| #define XST_UART_BAUD_ERROR 1055L |
| #define XST_UART_BAUD_RANGE 1056L |
| |
| |
| /************************ IIC statuses 1076 - 1100 ***************************/ |
| |
| #define XST_IIC_SELFTEST_FAILED 1076 /* self test failed */ |
| #define XST_IIC_BUS_BUSY 1077 /* bus found busy */ |
| #define XST_IIC_GENERAL_CALL_ADDRESS 1078 /* mastersend attempted with */ |
| /* general call address */ |
| #define XST_IIC_STAND_REG_RESET_ERROR 1079 /* A non parameterizable reg */ |
| /* value after reset not valid */ |
| #define XST_IIC_TX_FIFO_REG_RESET_ERROR 1080 /* Tx fifo included in design */ |
| /* value after reset not valid */ |
| #define XST_IIC_RX_FIFO_REG_RESET_ERROR 1081 /* Rx fifo included in design */ |
| /* value after reset not valid */ |
| #define XST_IIC_TBA_REG_RESET_ERROR 1082 /* 10 bit addr incl in design */ |
| /* value after reset not valid */ |
| #define XST_IIC_CR_READBACK_ERROR 1083 /* Read of the control register */ |
| /* didn't return value written */ |
| #define XST_IIC_DTR_READBACK_ERROR 1084 /* Read of the data Tx reg */ |
| /* didn't return value written */ |
| #define XST_IIC_DRR_READBACK_ERROR 1085 /* Read of the data Receive reg */ |
| /* didn't return value written */ |
| #define XST_IIC_ADR_READBACK_ERROR 1086 /* Read of the data Tx reg */ |
| /* didn't return value written */ |
| #define XST_IIC_TBA_READBACK_ERROR 1087 /* Read of the 10 bit addr reg */ |
| /* didn't return written value */ |
| #define XST_IIC_NOT_SLAVE 1088 /* The device isn't a slave */ |
| |
| /*********************** ATMC statuses 1101 - 1125 ***************************/ |
| |
| #define XST_ATMC_ERROR_COUNT_MAX 1101L /* the error counters in the ATM |
| controller hit the max value |
| which requires the statistics |
| to be cleared */ |
| |
| /*********************** Flash statuses 1126 - 1150 **************************/ |
| |
| #define XST_FLASH_BUSY 1126L /* Flash is erasing or programming |
| */ |
| #define XST_FLASH_READY 1127L /* Flash is ready for commands */ |
| #define XST_FLASH_ERROR 1128L /* Flash had detected an internal |
| error. Use XFlash_DeviceControl |
| to retrieve device specific codes |
| */ |
| #define XST_FLASH_ERASE_SUSPENDED 1129L /* Flash is in suspended erase state |
| */ |
| #define XST_FLASH_WRITE_SUSPENDED 1130L /* Flash is in suspended write state |
| */ |
| #define XST_FLASH_PART_NOT_SUPPORTED 1131L /* Flash type not supported by |
| driver */ |
| #define XST_FLASH_NOT_SUPPORTED 1132L /* Operation not supported */ |
| #define XST_FLASH_TOO_MANY_REGIONS 1133L /* Too many erase regions */ |
| #define XST_FLASH_TIMEOUT_ERROR 1134L /* Programming or erase operation |
| aborted due to a timeout */ |
| #define XST_FLASH_ADDRESS_ERROR 1135L /* Accessed flash outside its |
| addressible range */ |
| #define XST_FLASH_ALIGNMENT_ERROR 1136L /* Write alignment error */ |
| #define XST_FLASH_BLOCKING_CALL_ERROR 1137L /* Couldn't return immediately from |
| write/erase function with |
| XFL_NON_BLOCKING_WRITE/ERASE |
| option cleared */ |
| #define XST_FLASH_CFI_QUERY_ERROR 1138L /* Failed to query the device */ |
| |
| /*********************** SPI statuses 1151 - 1175 ****************************/ |
| |
| #define XST_SPI_MODE_FAULT 1151 /* master was selected as slave */ |
| #define XST_SPI_TRANSFER_DONE 1152 /* data transfer is complete */ |
| #define XST_SPI_TRANSMIT_UNDERRUN 1153 /* slave underruns transmit register */ |
| #define XST_SPI_RECEIVE_OVERRUN 1154 /* device overruns receive register */ |
| #define XST_SPI_NO_SLAVE 1155 /* no slave has been selected yet */ |
| #define XST_SPI_TOO_MANY_SLAVES 1156 /* more than one slave is being |
| * selected */ |
| #define XST_SPI_NOT_MASTER 1157 /* operation is valid only as master */ |
| #define XST_SPI_SLAVE_ONLY 1158 /* device is configured as slave-only |
| */ |
| #define XST_SPI_SLAVE_MODE_FAULT 1159 /* slave was selected while disabled */ |
| #define XST_SPI_SLAVE_MODE 1160 /* device has been addressed as slave */ |
| #define XST_SPI_RECEIVE_NOT_EMPTY 1161 /* device received data in slave mode */ |
| |
| #define XST_SPI_COMMAND_ERROR 1162 /* unrecognised command - qspi only */ |
| |
| /********************** OPB Arbiter statuses 1176 - 1200 *********************/ |
| |
| #define XST_OPBARB_INVALID_PRIORITY 1176 /* the priority registers have either |
| * one master assigned to two or more |
| * priorities, or one master not |
| * assigned to any priority |
| */ |
| #define XST_OPBARB_NOT_SUSPENDED 1177 /* an attempt was made to modify the |
| * priority levels without first |
| * suspending the use of priority |
| * levels |
| */ |
| #define XST_OPBARB_PARK_NOT_ENABLED 1178 /* bus parking by id was enabled but |
| * bus parking was not enabled |
| */ |
| #define XST_OPBARB_NOT_FIXED_PRIORITY 1179 /* the arbiter must be in fixed |
| * priority mode to allow the |
| * priorities to be changed |
| */ |
| |
| /************************ Intc statuses 1201 - 1225 **************************/ |
| |
| #define XST_INTC_FAIL_SELFTEST 1201 /* self test failed */ |
| #define XST_INTC_CONNECT_ERROR 1202 /* interrupt already in use */ |
| |
| /********************** TmrCtr statuses 1226 - 1250 **************************/ |
| |
| #define XST_TMRCTR_TIMER_FAILED 1226 /* self test failed */ |
| |
| /********************** WdtTb statuses 1251 - 1275 ***************************/ |
| |
| #define XST_WDTTB_TIMER_FAILED 1251L |
| |
| /********************** PlbArb statuses 1276 - 1300 **************************/ |
| |
| #define XST_PLBARB_FAIL_SELFTEST 1276L |
| |
| /********************** Plb2Opb statuses 1301 - 1325 *************************/ |
| |
| #define XST_PLB2OPB_FAIL_SELFTEST 1301L |
| |
| /********************** Opb2Plb statuses 1326 - 1350 *************************/ |
| |
| #define XST_OPB2PLB_FAIL_SELFTEST 1326L |
| |
| /********************** SysAce statuses 1351 - 1360 **************************/ |
| |
| #define XST_SYSACE_NO_LOCK 1351L /* No MPU lock has been granted */ |
| |
| /********************** PCI Bridge statuses 1361 - 1375 **********************/ |
| |
| #define XST_PCI_INVALID_ADDRESS 1361L |
| |
| /********************** FlexRay constants 1400 - 1409 *************************/ |
| |
| #define XST_FR_TX_ERROR 1400 |
| #define XST_FR_TX_BUSY 1401 |
| #define XST_FR_BUF_LOCKED 1402 |
| #define XST_FR_NO_BUF 1403 |
| |
| /****************** USB constants 1410 - 1420 *******************************/ |
| |
| #define XST_USB_ALREADY_CONFIGURED 1410 |
| #define XST_USB_BUF_ALIGN_ERROR 1411 |
| #define XST_USB_NO_DESC_AVAILABLE 1412 |
| #define XST_USB_BUF_TOO_BIG 1413 |
| #define XST_USB_NO_BUF 1414 |
| |
| /****************** HWICAP constants 1421 - 1429 *****************************/ |
| |
| #define XST_HWICAP_WRITE_DONE 1421 |
| |
| |
| /****************** AXI VDMA constants 1430 - 1440 *****************************/ |
| |
| #define XST_VDMA_MISMATCH_ERROR 1430 |
| |
| /*********************** NAND Flash statuses 1441 - 1459 *********************/ |
| |
| #define XST_NAND_BUSY 1441L /* Flash is erasing or |
| * programming |
| */ |
| #define XST_NAND_READY 1442L /* Flash is ready for commands |
| */ |
| #define XST_NAND_ERROR 1443L /* Flash had detected an |
| * internal error. |
| */ |
| #define XST_NAND_PART_NOT_SUPPORTED 1444L /* Flash type not supported by |
| * driver |
| */ |
| #define XST_NAND_OPT_NOT_SUPPORTED 1445L /* Operation not supported |
| */ |
| #define XST_NAND_TIMEOUT_ERROR 1446L /* Programming or erase |
| * operation aborted due to a |
| * timeout |
| */ |
| #define XST_NAND_ADDRESS_ERROR 1447L /* Accessed flash outside its |
| * addressible range |
| */ |
| #define XST_NAND_ALIGNMENT_ERROR 1448L /* Write alignment error |
| */ |
| #define XST_NAND_PARAM_PAGE_ERROR 1449L /* Failed to read parameter |
| * page of the device |
| */ |
| #define XST_NAND_CACHE_ERROR 1450L /* Flash page buffer error |
| */ |
| |
| #define XST_NAND_WRITE_PROTECTED 1451L /* Flash is write protected |
| */ |
| |
| /**************************** Type Definitions *******************************/ |
| |
| typedef s32 XStatus; |
| |
| /***************** Macros (Inline Functions) Definitions *********************/ |
| |
| |
| /************************** Function Prototypes ******************************/ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* end of protection macro */ |
