blob: 6a5d4b387313a2240990d6bc1a30fe4a2cb3c77c [file] [log] [blame]
/**
* \file
*
* \brief API driver for component aat31xx.
*
* Copyright (c) 2011-2013 Atmel Corporation. All rights reserved.
*
* \asf_license_start
*
* \page License
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* 3. The name of Atmel may not be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* 4. This software may only be redistributed and used in connection with an
* Atmel microcontroller product.
*
* THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* \asf_license_stop
*
*/
/**
* \defgroup aat31xx_display_group Display - AAT31XX Controller
*
* Low-level driver for the AAT31XX LCD backlight controller. This driver provides access to the main
* features of the AAT31XX controller.
*
* \{
*/
#include "board.h"
#include "ioport.h"
#include "aat31xx.h"
#include "conf_aat31xx.h"
/// @cond 0
/**INDENT-OFF**/
#ifdef __cplusplus
extern "C" {
#endif
/**INDENT-ON**/
/// @endcond
#define DELAY_PULSE (0x18u)
#define DELAY_ENABLE (0x20000u)
#define DELAY_DISABLE (0x20000u)
/**
* \brief Set the LCD backlight level.
*
* \param ul_level backlight level.
*
* \note pin BOARD_AAT31XX_SET_GPIO must be configured before calling aat31xx_set_backlight.
*/
void aat31xx_set_backlight(uint32_t ul_level)
{
volatile uint32_t ul_delay;
uint32_t i;
#ifdef CONF_BOARD_AAT3155
ul_level = AAT31XX_MAX_BACKLIGHT_LEVEL - ul_level + 1;
#endif
#ifdef CONF_BOARD_AAT3193
ul_level = AAT31XX_MAX_BACKLIGHT_LEVEL - ul_level + 1;
#endif
/* Ensure valid level */
ul_level = (ul_level > AAT31XX_MAX_BACKLIGHT_LEVEL) ? AAT31XX_MAX_BACKLIGHT_LEVEL : ul_level;
ul_level = (ul_level < AAT31XX_MIN_BACKLIGHT_LEVEL) ? AAT31XX_MIN_BACKLIGHT_LEVEL : ul_level;
/* Set new backlight level */
for (i = 0; i < ul_level; i++) {
ioport_set_pin_level(BOARD_AAT31XX_SET_GPIO, IOPORT_PIN_LEVEL_LOW);
ul_delay = DELAY_PULSE;
while (ul_delay--) {
}
ioport_set_pin_level(BOARD_AAT31XX_SET_GPIO, IOPORT_PIN_LEVEL_HIGH);
ul_delay = DELAY_PULSE;
while (ul_delay--) {
}
}
ul_delay = DELAY_ENABLE;
while (ul_delay--) {
}
}
/**
* \brief Switch off backlight.
*/
void aat31xx_disable_backlight(void)
{
volatile uint32_t ul_delay;
ioport_set_pin_level(BOARD_AAT31XX_SET_GPIO, IOPORT_PIN_LEVEL_LOW);
ul_delay = DELAY_DISABLE;
while (ul_delay--) {
}
}
/// @cond 0
/**INDENT-OFF**/
#ifdef __cplusplus
}
#endif
/**INDENT-ON**/
/// @endcond
/**
* \}
*/