| /** | |
| ****************************************************************************** | |
| * @file stm32f4xx_spi.h | |
| * @author MCD Application Team | |
| * @version V1.0.0 | |
| * @date 30-September-2011 | |
| * @brief This file contains all the functions prototypes for the SPI | |
| * firmware library. | |
| ****************************************************************************** | |
| * @attention | |
| * | |
| * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS | |
| * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE | |
| * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY | |
| * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING | |
| * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE | |
| * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. | |
| * | |
| * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> | |
| ****************************************************************************** | |
| */ | |
| /* Define to prevent recursive inclusion -------------------------------------*/ | |
| #ifndef __STM32F4xx_SPI_H | |
| #define __STM32F4xx_SPI_H | |
| #ifdef __cplusplus | |
| extern "C" { | |
| #endif | |
| /* Includes ------------------------------------------------------------------*/ | |
| #include "stm32f4xx.h" | |
| /** @addtogroup STM32F4xx_StdPeriph_Driver | |
| * @{ | |
| */ | |
| /** @addtogroup SPI | |
| * @{ | |
| */ | |
| /* Exported types ------------------------------------------------------------*/ | |
| /** | |
| * @brief SPI Init structure definition | |
| */ | |
| typedef struct | |
| { | |
| uint16_t SPI_Direction; /*!< Specifies the SPI unidirectional or bidirectional data mode. | |
| This parameter can be a value of @ref SPI_data_direction */ | |
| uint16_t SPI_Mode; /*!< Specifies the SPI operating mode. | |
| This parameter can be a value of @ref SPI_mode */ | |
| uint16_t SPI_DataSize; /*!< Specifies the SPI data size. | |
| This parameter can be a value of @ref SPI_data_size */ | |
| uint16_t SPI_CPOL; /*!< Specifies the serial clock steady state. | |
| This parameter can be a value of @ref SPI_Clock_Polarity */ | |
| uint16_t SPI_CPHA; /*!< Specifies the clock active edge for the bit capture. | |
| This parameter can be a value of @ref SPI_Clock_Phase */ | |
| uint16_t SPI_NSS; /*!< Specifies whether the NSS signal is managed by | |
| hardware (NSS pin) or by software using the SSI bit. | |
| This parameter can be a value of @ref SPI_Slave_Select_management */ | |
| uint16_t SPI_BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be | |
| used to configure the transmit and receive SCK clock. | |
| This parameter can be a value of @ref SPI_BaudRate_Prescaler | |
| @note The communication clock is derived from the master | |
| clock. The slave clock does not need to be set. */ | |
| uint16_t SPI_FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit. | |
| This parameter can be a value of @ref SPI_MSB_LSB_transmission */ | |
| uint16_t SPI_CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation. */ | |
| }SPI_InitTypeDef; | |
| /** | |
| * @brief I2S Init structure definition | |
| */ | |
| typedef struct | |
| { | |
| uint16_t I2S_Mode; /*!< Specifies the I2S operating mode. | |
| This parameter can be a value of @ref I2S_Mode */ | |
| uint16_t I2S_Standard; /*!< Specifies the standard used for the I2S communication. | |
| This parameter can be a value of @ref I2S_Standard */ | |
| uint16_t I2S_DataFormat; /*!< Specifies the data format for the I2S communication. | |
| This parameter can be a value of @ref I2S_Data_Format */ | |
| uint16_t I2S_MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not. | |
| This parameter can be a value of @ref I2S_MCLK_Output */ | |
| uint32_t I2S_AudioFreq; /*!< Specifies the frequency selected for the I2S communication. | |
| This parameter can be a value of @ref I2S_Audio_Frequency */ | |
| uint16_t I2S_CPOL; /*!< Specifies the idle state of the I2S clock. | |
| This parameter can be a value of @ref I2S_Clock_Polarity */ | |
| }I2S_InitTypeDef; | |
| /* Exported constants --------------------------------------------------------*/ | |
| /** @defgroup SPI_Exported_Constants | |
| * @{ | |
| */ | |
| #define IS_SPI_ALL_PERIPH(PERIPH) (((PERIPH) == SPI1) || \ | |
| ((PERIPH) == SPI2) || \ | |
| ((PERIPH) == SPI3)) | |
| #define IS_SPI_ALL_PERIPH_EXT(PERIPH) (((PERIPH) == SPI1) || \ | |
| ((PERIPH) == SPI2) || \ | |
| ((PERIPH) == SPI3) || \ | |
| ((PERIPH) == I2S2ext) || \ | |
| ((PERIPH) == I2S3ext)) | |
| #define IS_SPI_23_PERIPH(PERIPH) (((PERIPH) == SPI2) || \ | |
| ((PERIPH) == SPI3)) | |
| #define IS_SPI_23_PERIPH_EXT(PERIPH) (((PERIPH) == SPI2) || \ | |
| ((PERIPH) == SPI3) || \ | |
| ((PERIPH) == I2S2ext) || \ | |
| ((PERIPH) == I2S3ext)) | |
| #define IS_I2S_EXT_PERIPH(PERIPH) (((PERIPH) == I2S2ext) || \ | |
| ((PERIPH) == I2S3ext)) | |
| /** @defgroup SPI_data_direction | |
| * @{ | |
| */ | |
| #define SPI_Direction_2Lines_FullDuplex ((uint16_t)0x0000) | |
| #define SPI_Direction_2Lines_RxOnly ((uint16_t)0x0400) | |
| #define SPI_Direction_1Line_Rx ((uint16_t)0x8000) | |
| #define SPI_Direction_1Line_Tx ((uint16_t)0xC000) | |
| #define IS_SPI_DIRECTION_MODE(MODE) (((MODE) == SPI_Direction_2Lines_FullDuplex) || \ | |
| ((MODE) == SPI_Direction_2Lines_RxOnly) || \ | |
| ((MODE) == SPI_Direction_1Line_Rx) || \ | |
| ((MODE) == SPI_Direction_1Line_Tx)) | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup SPI_mode | |
| * @{ | |
| */ | |
| #define SPI_Mode_Master ((uint16_t)0x0104) | |
| #define SPI_Mode_Slave ((uint16_t)0x0000) | |
| #define IS_SPI_MODE(MODE) (((MODE) == SPI_Mode_Master) || \ | |
| ((MODE) == SPI_Mode_Slave)) | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup SPI_data_size | |
| * @{ | |
| */ | |
| #define SPI_DataSize_16b ((uint16_t)0x0800) | |
| #define SPI_DataSize_8b ((uint16_t)0x0000) | |
| #define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DataSize_16b) || \ | |
| ((DATASIZE) == SPI_DataSize_8b)) | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup SPI_Clock_Polarity | |
| * @{ | |
| */ | |
| #define SPI_CPOL_Low ((uint16_t)0x0000) | |
| #define SPI_CPOL_High ((uint16_t)0x0002) | |
| #define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_CPOL_Low) || \ | |
| ((CPOL) == SPI_CPOL_High)) | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup SPI_Clock_Phase | |
| * @{ | |
| */ | |
| #define SPI_CPHA_1Edge ((uint16_t)0x0000) | |
| #define SPI_CPHA_2Edge ((uint16_t)0x0001) | |
| #define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_CPHA_1Edge) || \ | |
| ((CPHA) == SPI_CPHA_2Edge)) | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup SPI_Slave_Select_management | |
| * @{ | |
| */ | |
| #define SPI_NSS_Soft ((uint16_t)0x0200) | |
| #define SPI_NSS_Hard ((uint16_t)0x0000) | |
| #define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_Soft) || \ | |
| ((NSS) == SPI_NSS_Hard)) | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup SPI_BaudRate_Prescaler | |
| * @{ | |
| */ | |
| #define SPI_BaudRatePrescaler_2 ((uint16_t)0x0000) | |
| #define SPI_BaudRatePrescaler_4 ((uint16_t)0x0008) | |
| #define SPI_BaudRatePrescaler_8 ((uint16_t)0x0010) | |
| #define SPI_BaudRatePrescaler_16 ((uint16_t)0x0018) | |
| #define SPI_BaudRatePrescaler_32 ((uint16_t)0x0020) | |
| #define SPI_BaudRatePrescaler_64 ((uint16_t)0x0028) | |
| #define SPI_BaudRatePrescaler_128 ((uint16_t)0x0030) | |
| #define SPI_BaudRatePrescaler_256 ((uint16_t)0x0038) | |
| #define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BaudRatePrescaler_2) || \ | |
| ((PRESCALER) == SPI_BaudRatePrescaler_4) || \ | |
| ((PRESCALER) == SPI_BaudRatePrescaler_8) || \ | |
| ((PRESCALER) == SPI_BaudRatePrescaler_16) || \ | |
| ((PRESCALER) == SPI_BaudRatePrescaler_32) || \ | |
| ((PRESCALER) == SPI_BaudRatePrescaler_64) || \ | |
| ((PRESCALER) == SPI_BaudRatePrescaler_128) || \ | |
| ((PRESCALER) == SPI_BaudRatePrescaler_256)) | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup SPI_MSB_LSB_transmission | |
| * @{ | |
| */ | |
| #define SPI_FirstBit_MSB ((uint16_t)0x0000) | |
| #define SPI_FirstBit_LSB ((uint16_t)0x0080) | |
| #define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FirstBit_MSB) || \ | |
| ((BIT) == SPI_FirstBit_LSB)) | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup SPI_I2S_Mode | |
| * @{ | |
| */ | |
| #define I2S_Mode_SlaveTx ((uint16_t)0x0000) | |
| #define I2S_Mode_SlaveRx ((uint16_t)0x0100) | |
| #define I2S_Mode_MasterTx ((uint16_t)0x0200) | |
| #define I2S_Mode_MasterRx ((uint16_t)0x0300) | |
| #define IS_I2S_MODE(MODE) (((MODE) == I2S_Mode_SlaveTx) || \ | |
| ((MODE) == I2S_Mode_SlaveRx) || \ | |
| ((MODE) == I2S_Mode_MasterTx)|| \ | |
| ((MODE) == I2S_Mode_MasterRx)) | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup SPI_I2S_Standard | |
| * @{ | |
| */ | |
| #define I2S_Standard_Phillips ((uint16_t)0x0000) | |
| #define I2S_Standard_MSB ((uint16_t)0x0010) | |
| #define I2S_Standard_LSB ((uint16_t)0x0020) | |
| #define I2S_Standard_PCMShort ((uint16_t)0x0030) | |
| #define I2S_Standard_PCMLong ((uint16_t)0x00B0) | |
| #define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_Standard_Phillips) || \ | |
| ((STANDARD) == I2S_Standard_MSB) || \ | |
| ((STANDARD) == I2S_Standard_LSB) || \ | |
| ((STANDARD) == I2S_Standard_PCMShort) || \ | |
| ((STANDARD) == I2S_Standard_PCMLong)) | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup SPI_I2S_Data_Format | |
| * @{ | |
| */ | |
| #define I2S_DataFormat_16b ((uint16_t)0x0000) | |
| #define I2S_DataFormat_16bextended ((uint16_t)0x0001) | |
| #define I2S_DataFormat_24b ((uint16_t)0x0003) | |
| #define I2S_DataFormat_32b ((uint16_t)0x0005) | |
| #define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DataFormat_16b) || \ | |
| ((FORMAT) == I2S_DataFormat_16bextended) || \ | |
| ((FORMAT) == I2S_DataFormat_24b) || \ | |
| ((FORMAT) == I2S_DataFormat_32b)) | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup SPI_I2S_MCLK_Output | |
| * @{ | |
| */ | |
| #define I2S_MCLKOutput_Enable ((uint16_t)0x0200) | |
| #define I2S_MCLKOutput_Disable ((uint16_t)0x0000) | |
| #define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOutput_Enable) || \ | |
| ((OUTPUT) == I2S_MCLKOutput_Disable)) | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup SPI_I2S_Audio_Frequency | |
| * @{ | |
| */ | |
| #define I2S_AudioFreq_192k ((uint32_t)192000) | |
| #define I2S_AudioFreq_96k ((uint32_t)96000) | |
| #define I2S_AudioFreq_48k ((uint32_t)48000) | |
| #define I2S_AudioFreq_44k ((uint32_t)44100) | |
| #define I2S_AudioFreq_32k ((uint32_t)32000) | |
| #define I2S_AudioFreq_22k ((uint32_t)22050) | |
| #define I2S_AudioFreq_16k ((uint32_t)16000) | |
| #define I2S_AudioFreq_11k ((uint32_t)11025) | |
| #define I2S_AudioFreq_8k ((uint32_t)8000) | |
| #define I2S_AudioFreq_Default ((uint32_t)2) | |
| #define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AudioFreq_8k) && \ | |
| ((FREQ) <= I2S_AudioFreq_192k)) || \ | |
| ((FREQ) == I2S_AudioFreq_Default)) | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup SPI_I2S_Clock_Polarity | |
| * @{ | |
| */ | |
| #define I2S_CPOL_Low ((uint16_t)0x0000) | |
| #define I2S_CPOL_High ((uint16_t)0x0008) | |
| #define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_Low) || \ | |
| ((CPOL) == I2S_CPOL_High)) | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup SPI_I2S_DMA_transfer_requests | |
| * @{ | |
| */ | |
| #define SPI_I2S_DMAReq_Tx ((uint16_t)0x0002) | |
| #define SPI_I2S_DMAReq_Rx ((uint16_t)0x0001) | |
| #define IS_SPI_I2S_DMAREQ(DMAREQ) ((((DMAREQ) & (uint16_t)0xFFFC) == 0x00) && ((DMAREQ) != 0x00)) | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup SPI_NSS_internal_software_management | |
| * @{ | |
| */ | |
| #define SPI_NSSInternalSoft_Set ((uint16_t)0x0100) | |
| #define SPI_NSSInternalSoft_Reset ((uint16_t)0xFEFF) | |
| #define IS_SPI_NSS_INTERNAL(INTERNAL) (((INTERNAL) == SPI_NSSInternalSoft_Set) || \ | |
| ((INTERNAL) == SPI_NSSInternalSoft_Reset)) | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup SPI_CRC_Transmit_Receive | |
| * @{ | |
| */ | |
| #define SPI_CRC_Tx ((uint8_t)0x00) | |
| #define SPI_CRC_Rx ((uint8_t)0x01) | |
| #define IS_SPI_CRC(CRC) (((CRC) == SPI_CRC_Tx) || ((CRC) == SPI_CRC_Rx)) | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup SPI_direction_transmit_receive | |
| * @{ | |
| */ | |
| #define SPI_Direction_Rx ((uint16_t)0xBFFF) | |
| #define SPI_Direction_Tx ((uint16_t)0x4000) | |
| #define IS_SPI_DIRECTION(DIRECTION) (((DIRECTION) == SPI_Direction_Rx) || \ | |
| ((DIRECTION) == SPI_Direction_Tx)) | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup SPI_I2S_interrupts_definition | |
| * @{ | |
| */ | |
| #define SPI_I2S_IT_TXE ((uint8_t)0x71) | |
| #define SPI_I2S_IT_RXNE ((uint8_t)0x60) | |
| #define SPI_I2S_IT_ERR ((uint8_t)0x50) | |
| #define I2S_IT_UDR ((uint8_t)0x53) | |
| #define SPI_I2S_IT_TIFRFE ((uint8_t)0x58) | |
| #define IS_SPI_I2S_CONFIG_IT(IT) (((IT) == SPI_I2S_IT_TXE) || \ | |
| ((IT) == SPI_I2S_IT_RXNE) || \ | |
| ((IT) == SPI_I2S_IT_ERR)) | |
| #define SPI_I2S_IT_OVR ((uint8_t)0x56) | |
| #define SPI_IT_MODF ((uint8_t)0x55) | |
| #define SPI_IT_CRCERR ((uint8_t)0x54) | |
| #define IS_SPI_I2S_CLEAR_IT(IT) (((IT) == SPI_IT_CRCERR)) | |
| #define IS_SPI_I2S_GET_IT(IT) (((IT) == SPI_I2S_IT_RXNE)|| ((IT) == SPI_I2S_IT_TXE) || \ | |
| ((IT) == SPI_IT_CRCERR) || ((IT) == SPI_IT_MODF) || \ | |
| ((IT) == SPI_I2S_IT_OVR) || ((IT) == I2S_IT_UDR) ||\ | |
| ((IT) == SPI_I2S_IT_TIFRFE)) | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup SPI_I2S_flags_definition | |
| * @{ | |
| */ | |
| #define SPI_I2S_FLAG_RXNE ((uint16_t)0x0001) | |
| #define SPI_I2S_FLAG_TXE ((uint16_t)0x0002) | |
| #define I2S_FLAG_CHSIDE ((uint16_t)0x0004) | |
| #define I2S_FLAG_UDR ((uint16_t)0x0008) | |
| #define SPI_FLAG_CRCERR ((uint16_t)0x0010) | |
| #define SPI_FLAG_MODF ((uint16_t)0x0020) | |
| #define SPI_I2S_FLAG_OVR ((uint16_t)0x0040) | |
| #define SPI_I2S_FLAG_BSY ((uint16_t)0x0080) | |
| #define SPI_I2S_FLAG_TIFRFE ((uint16_t)0x0100) | |
| #define IS_SPI_I2S_CLEAR_FLAG(FLAG) (((FLAG) == SPI_FLAG_CRCERR)) | |
| #define IS_SPI_I2S_GET_FLAG(FLAG) (((FLAG) == SPI_I2S_FLAG_BSY) || ((FLAG) == SPI_I2S_FLAG_OVR) || \ | |
| ((FLAG) == SPI_FLAG_MODF) || ((FLAG) == SPI_FLAG_CRCERR) || \ | |
| ((FLAG) == I2S_FLAG_UDR) || ((FLAG) == I2S_FLAG_CHSIDE) || \ | |
| ((FLAG) == SPI_I2S_FLAG_TXE) || ((FLAG) == SPI_I2S_FLAG_RXNE)|| \ | |
| ((FLAG) == SPI_I2S_FLAG_TIFRFE)) | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup SPI_CRC_polynomial | |
| * @{ | |
| */ | |
| #define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) ((POLYNOMIAL) >= 0x1) | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup SPI_I2S_Legacy | |
| * @{ | |
| */ | |
| #define SPI_DMAReq_Tx SPI_I2S_DMAReq_Tx | |
| #define SPI_DMAReq_Rx SPI_I2S_DMAReq_Rx | |
| #define SPI_IT_TXE SPI_I2S_IT_TXE | |
| #define SPI_IT_RXNE SPI_I2S_IT_RXNE | |
| #define SPI_IT_ERR SPI_I2S_IT_ERR | |
| #define SPI_IT_OVR SPI_I2S_IT_OVR | |
| #define SPI_FLAG_RXNE SPI_I2S_FLAG_RXNE | |
| #define SPI_FLAG_TXE SPI_I2S_FLAG_TXE | |
| #define SPI_FLAG_OVR SPI_I2S_FLAG_OVR | |
| #define SPI_FLAG_BSY SPI_I2S_FLAG_BSY | |
| #define SPI_DeInit SPI_I2S_DeInit | |
| #define SPI_ITConfig SPI_I2S_ITConfig | |
| #define SPI_DMACmd SPI_I2S_DMACmd | |
| #define SPI_SendData SPI_I2S_SendData | |
| #define SPI_ReceiveData SPI_I2S_ReceiveData | |
| #define SPI_GetFlagStatus SPI_I2S_GetFlagStatus | |
| #define SPI_ClearFlag SPI_I2S_ClearFlag | |
| #define SPI_GetITStatus SPI_I2S_GetITStatus | |
| #define SPI_ClearITPendingBit SPI_I2S_ClearITPendingBit | |
| /** | |
| * @} | |
| */ | |
| /** | |
| * @} | |
| */ | |
| /* Exported macro ------------------------------------------------------------*/ | |
| /* Exported functions --------------------------------------------------------*/ | |
| /* Function used to set the SPI configuration to the default reset state *****/ | |
| void SPI_I2S_DeInit(SPI_TypeDef* SPIx); | |
| /* Initialization and Configuration functions *********************************/ | |
| void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct); | |
| void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct); | |
| void SPI_StructInit(SPI_InitTypeDef* SPI_InitStruct); | |
| void I2S_StructInit(I2S_InitTypeDef* I2S_InitStruct); | |
| void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState); | |
| void I2S_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState); | |
| void SPI_DataSizeConfig(SPI_TypeDef* SPIx, uint16_t SPI_DataSize); | |
| void SPI_BiDirectionalLineConfig(SPI_TypeDef* SPIx, uint16_t SPI_Direction); | |
| void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, uint16_t SPI_NSSInternalSoft); | |
| void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState); | |
| void SPI_TIModeCmd(SPI_TypeDef* SPIx, FunctionalState NewState); | |
| void I2S_FullDuplexConfig(SPI_TypeDef* I2Sxext, I2S_InitTypeDef* I2S_InitStruct); | |
| /* Data transfers functions ***************************************************/ | |
| void SPI_I2S_SendData(SPI_TypeDef* SPIx, uint16_t Data); | |
| uint16_t SPI_I2S_ReceiveData(SPI_TypeDef* SPIx); | |
| /* Hardware CRC Calculation functions *****************************************/ | |
| void SPI_CalculateCRC(SPI_TypeDef* SPIx, FunctionalState NewState); | |
| void SPI_TransmitCRC(SPI_TypeDef* SPIx); | |
| uint16_t SPI_GetCRC(SPI_TypeDef* SPIx, uint8_t SPI_CRC); | |
| uint16_t SPI_GetCRCPolynomial(SPI_TypeDef* SPIx); | |
| /* DMA transfers management functions *****************************************/ | |
| void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState); | |
| /* Interrupts and flags management functions **********************************/ | |
| void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState); | |
| FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG); | |
| void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG); | |
| ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT); | |
| void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT); | |
| #ifdef __cplusplus | |
| } | |
| #endif | |
| #endif /*__STM32F4xx_SPI_H */ | |
| /** | |
| * @} | |
| */ | |
| /** | |
| * @} | |
| */ | |
| /******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ |