| /* |
| * Copyright (c) 2014-2016, Texas Instruments Incorporated |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * |
| * * Neither the name of Texas Instruments Incorporated nor the names of |
| * its contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, |
| * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR |
| * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR |
| * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, |
| * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, |
| * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; |
| * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR |
| * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, |
| * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| /** ============================================================================ |
| * @file UARTCC32XXDMA.h |
| * |
| * @brief UART driver implementation for a CC32XX UART controller, using |
| * the micro DMA controller. |
| * |
| * The UART header file should be included in an application as follows: |
| * @code |
| * #include <ti/drivers/UART.h> |
| * #include <ti/drivers/uart/UARTCC32XXDMA.h> |
| * @endcode |
| * |
| * Refer to @ref UART.h for a complete description of APIs & example of use. |
| * |
| * |
| * # Device Specific Pin Mode Macros # |
| * This header file contains pin mode definitions used to specify the |
| * UART TX and RX pin assignment in the UARTCC32XXDMA_HWAttrsV1 structure. |
| * Please refer to the CC32XX Techincal Reference Manual for details on pin |
| * multiplexing. The bits in the pin mode macros are as follows: |
| * The lower 8 bits of the macro refer to the pin, offset by 1, to match |
| * driverlib pin defines. For example, |
| * UARTCC32XXDMA_PIN_01_UART1_TX & 0xff = 0, |
| * which equals PIN_01 in driverlib pin.h. By matching the PIN_xx defines in |
| * driverlib pin.h, we can pass the pin directly to the driverlib functions. |
| * The upper 8 bits of the macro correspond to the pin mux confg mode |
| * value for the pin to operate in the UART mode. For example, pin 1 is |
| * configured with mode 7 to operate as UART1 TX. |
| * |
| * ============================================================================ |
| */ |
| |
| #ifndef ti_drivers_uart_UARTCC32XXDMA__include |
| #define ti_drivers_uart_UARTCC32XXDMA__include |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| #include <stdint.h> |
| #include <stdbool.h> |
| |
| #include <ti/drivers/dpl/ClockP.h> |
| #include <ti/drivers/dpl/HwiP.h> |
| |
| #include <ti/drivers/dpl/SemaphoreP.h> |
| #include <ti/drivers/Power.h> |
| #include <ti/drivers/UART.h> |
| #include <ti/drivers/dma/UDMACC32XX.h> |
| |
| |
| #define UARTCC32XXDMA_PIN_01_UART1_TX 0x700 |
| #define UARTCC32XXDMA_PIN_02_UART1_RX 0x701 |
| #define UARTCC32XXDMA_PIN_03_UART0_TX 0x702 |
| #define UARTCC32XXDMA_PIN_04_UART0_RX 0x703 |
| #define UARTCC32XXDMA_PIN_07_UART1_TX 0x506 |
| #define UARTCC32XXDMA_PIN_08_UART1_RX 0x507 |
| #define UARTCC32XXDMA_PIN_16_UART1_TX 0x20F |
| #define UARTCC32XXDMA_PIN_17_UART1_RX 0x210 |
| #define UARTCC32XXDMA_PIN_45_UART0_RX 0x92C |
| #define UARTCC32XXDMA_PIN_45_UART1_RX 0x22C |
| #define UARTCC32XXDMA_PIN_53_UART0_TX 0x934 |
| #define UARTCC32XXDMA_PIN_55_UART0_TX 0x336 |
| #define UARTCC32XXDMA_PIN_55_UART1_TX 0x636 |
| #define UARTCC32XXDMA_PIN_57_UART0_RX 0x338 |
| #define UARTCC32XXDMA_PIN_57_UART1_RX 0x638 |
| #define UARTCC32XXDMA_PIN_58_UART1_TX 0x639 |
| #define UARTCC32XXDMA_PIN_59_UART1_RX 0x63A |
| #define UARTCC32XXDMA_PIN_62_UART0_TX 0xB3D |
| |
| |
| /** |
| * @addtogroup UART_STATUS |
| * UARTCC32XXDMA_STATUS_* macros are command codes only defined in the |
| * UARTCC32XXDMA.h driver implementation and need to: |
| * @code |
| * #include <ti/drivers/uart/UARTCC32XXDMA.h> |
| * @endcode |
| * @{ |
| */ |
| |
| /* Add UARTCC32XXDMA_STATUS_* macros here */ |
| |
| /** @}*/ |
| |
| /** |
| * @addtogroup UART_CMD |
| * UARTCC32XXDMA_CMD_* macros are command codes only defined in the |
| * UARTCC32XXDMA.h driver implementation and need to: |
| * @code |
| * #include <ti/drivers/uart/UARTCC32XXDMA.h> |
| * @endcode |
| * @{ |
| */ |
| |
| /*! |
| * @brief Command used by UART_control to determines |
| * whether the UART transmitter is busy or not |
| * |
| * With this command code, @b arg is a pointer to a @c bool. |
| * @b *arg contains @c true if the UART is transmitting, |
| * else @c false if all transmissions are complete. |
| */ |
| #define UARTCC32XXDMA_CMD_IS_BUSY (UART_CMD_RESERVED + 0) |
| |
| |
| /*! |
| * @brief Command used by UART_control to determines |
| * if there are any characters in the receive FIFO |
| * |
| * With this command code, @b arg is a pointer to a @c bool. |
| * @b *arg contains @c true if there is data in the receive FIFO, |
| * or @c false if there is no data in the receive FIFO. |
| */ |
| #define UARTCC32XXDMA_CMD_IS_RX_DATA_AVAILABLE (UART_CMD_RESERVED + 1) |
| |
| |
| /*! |
| * @brief Command used by UART_control to determines |
| * if there is any space in the transmit FIFO |
| * |
| * With this command code, @b arg is a pointer to a @c bool. |
| * @b *arg contains @c true if there is space available in the transmit FIFO, |
| * or @c false if there is no space available in the transmit FIFO. |
| */ |
| #define UARTCC32XXDMA_CMD_IS_TX_SPACE_AVAILABLE (UART_CMD_RESERVED + 2) |
| |
| |
| /** @}*/ |
| |
| /* UART function table pointer */ |
| extern const UART_FxnTable UARTCC32XXDMA_fxnTable; |
| |
| /*! |
| * @brief UARTCC32XXDMA Hardware attributes |
| * |
| * These fields, with the exception of intPriority, |
| * are used by driverlib APIs and therefore must be populated by |
| * driverlib macro definitions. For CC32XXWare these definitions are found in: |
| * - inc/hw_memmap.h |
| * - inc/hw_ints.h |
| * |
| * intPriority is the UART peripheral's interrupt priority, as defined by the |
| * underlying OS. It is passed unmodified to the underlying OS's interrupt |
| * handler creation code, so you need to refer to the OS documentation |
| * for usage. For example, for SYS/BIOS applications, refer to the |
| * ti.sysbios.family.arm.m3.Hwi documentation for SYS/BIOS usage of |
| * interrupt priorities. If the driver uses the ti.dpl interface |
| * instead of making OS calls directly, then the HwiP port handles the |
| * interrupt priority in an OS specific way. In the case of the SYS/BIOS |
| * port, intPriority is passed unmodified to Hwi_create(). |
| * |
| * A sample structure is shown below: |
| * @code |
| * const UARTCC32XXDMA_HWAttrsV1 uartCC32XXHWAttrs[] = { |
| * { |
| * .baseAddr = UARTA0_BASE, |
| * .intNum = INT_UARTA0, |
| * .intPriority = (~0), |
| * .rxChannelIndex = DMA_CH8_UARTA0_RX, |
| * .txChannelIndex = UDMA_CH9_UARTA0_TX, |
| * .rxPin = UARTCC32XXDMA_PIN_57_UART0_RX, |
| * .txPin = UARTCC32XXDMA_PIN_55_UART0_TX |
| * }, |
| * { |
| * .baseAddr = UARTA1_BASE, |
| * .intNum = INT_UARTA1, |
| * .intPriority = (~0), |
| * .rxChannelIndex = UDMA_CH10_UARTA1_RX, |
| * .txChannelIndex = UDMA_CH11_UARTA1_TX, |
| * .rxPin = UARTCC32XXDMA_PIN_08_UART1_RX, |
| * .txPin = UARTCC32XXDMA_PIN_07_UART1_TX |
| * }, |
| * }; |
| * @endcode |
| */ |
| typedef struct UARTCC32XXDMA_HWAttrsV1 { |
| /*! UART Peripheral's base address */ |
| unsigned int baseAddr; |
| /*! UART Peripheral's interrupt vector */ |
| unsigned int intNum; |
| /*! UART Peripheral's interrupt priority */ |
| unsigned int intPriority; |
| /*! uDMA controlTable receive channel index */ |
| unsigned long rxChannelIndex; |
| /*! uDMA controlTable transmit channel index */ |
| unsigned long txChannelIndex; |
| /*! UART RX pin assignment */ |
| uint16_t rxPin; |
| /*! UART TX pin assignment */ |
| uint16_t txPin; |
| } UARTCC32XXDMA_HWAttrsV1; |
| |
| /*! |
| * @brief UARTCC32XXDMA Object |
| * |
| * The application must not access any member variables of this structure! |
| */ |
| typedef struct UARTCC32XXDMA_Object { |
| /* UART control variables */ |
| bool opened; /* Has the obj been opened */ |
| UART_Mode readMode; /* Mode for all read calls */ |
| UART_Mode writeMode; /* Mode for all write calls */ |
| unsigned int readTimeout; /* Timeout for read semaphore */ |
| unsigned int writeTimeout; /* Timeout for write semaphore */ |
| UART_Callback readCallback; /* Pointer to read callback */ |
| UART_Callback writeCallback; /* Pointer to write callback */ |
| UART_ReturnMode readReturnMode; /* Receive return mode */ |
| UART_DataMode readDataMode; /* Type of data being read */ |
| UART_DataMode writeDataMode; /* Type of data being written */ |
| uint32_t baudRate; /* Baud rate for UART */ |
| UART_LEN dataLength; /* Data length for UART */ |
| UART_STOP stopBits; /* Stop bits for UART */ |
| UART_PAR parityType; /* Parity bit type for UART */ |
| UART_Echo readEcho; /* Echo received data back */ |
| |
| /* UART write variables */ |
| const void *writeBuf; /* Buffer data pointer */ |
| size_t writeCount; /* Number of Chars sent */ |
| size_t writeSize; /* Chars remaining in buffer */ |
| |
| /* UART receive variables */ |
| void *readBuf; /* Buffer data pointer */ |
| size_t readCount; /* Number of Chars read */ |
| size_t readSize; /* Chars remaining in buffer */ |
| |
| /* Semaphores for blocking mode */ |
| SemaphoreP_Handle writeSem; /* UART write semaphore */ |
| SemaphoreP_Handle readSem; /* UART read semaphore */ |
| |
| HwiP_Handle hwiHandle; |
| |
| /* For Power management */ |
| ClockP_Handle txFifoEmptyClk; /* UART TX FIFO empty clock */ |
| Power_NotifyObj postNotify; /* LPDS wake-up notify object */ |
| unsigned int powerMgrId; /* Determined from base address */ |
| |
| /* UDMA */ |
| UDMACC32XX_Handle dmaHandle; |
| } UARTCC32XXDMA_Object, *UARTCC32XXDMA_Handle; |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* ti_drivers_uart_UARTCC32XXDMA__include */ |
