| /** | |
| * \file | |
| * | |
| * Copyright (c) 2015 Atmel Corporation. All rights reserved. | |
| * | |
| * \asf_license_start | |
| * | |
| * \page License | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions are met: | |
| * | |
| * 1. Redistributions of source code must retain the above copyright notice, | |
| * this list of conditions and the following disclaimer. | |
| * | |
| * 2. Redistributions in binary form must reproduce the above copyright notice, | |
| * this list of conditions and the following disclaimer in the documentation | |
| * and/or other materials provided with the distribution. | |
| * | |
| * 3. The name of Atmel may not be used to endorse or promote products derived | |
| * from this software without specific prior written permission. | |
| * | |
| * 4. This software may only be redistributed and used in connection with an | |
| * Atmel microcontroller product. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED | |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF | |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE | |
| * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR | |
| * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN | |
| * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | |
| * POSSIBILITY OF SUCH DAMAGE. | |
| * | |
| * \asf_license_stop | |
| * | |
| */ | |
| /* | |
| * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> | |
| */ | |
| #ifndef _SAME70_ACC_COMPONENT_ | |
| #define _SAME70_ACC_COMPONENT_ | |
| /* ============================================================================= */ | |
| /** SOFTWARE API DEFINITION FOR Analog Comparator Controller */ | |
| /* ============================================================================= */ | |
| /** \addtogroup SAME70_ACC Analog Comparator Controller */ | |
| /*@{*/ | |
| #if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) | |
| /** \brief Acc hardware registers */ | |
| typedef struct { | |
| __O uint32_t ACC_CR; /**< \brief (Acc Offset: 0x00) Control Register */ | |
| __IO uint32_t ACC_MR; /**< \brief (Acc Offset: 0x04) Mode Register */ | |
| __I uint32_t Reserved1[7]; | |
| __O uint32_t ACC_IER; /**< \brief (Acc Offset: 0x24) Interrupt Enable Register */ | |
| __O uint32_t ACC_IDR; /**< \brief (Acc Offset: 0x28) Interrupt Disable Register */ | |
| __I uint32_t ACC_IMR; /**< \brief (Acc Offset: 0x2C) Interrupt Mask Register */ | |
| __I uint32_t ACC_ISR; /**< \brief (Acc Offset: 0x30) Interrupt Status Register */ | |
| __I uint32_t Reserved2[24]; | |
| __IO uint32_t ACC_ACR; /**< \brief (Acc Offset: 0x94) Analog Control Register */ | |
| __I uint32_t Reserved3[19]; | |
| __IO uint32_t ACC_WPMR; /**< \brief (Acc Offset: 0xE4) Write Protection Mode Register */ | |
| __I uint32_t ACC_WPSR; /**< \brief (Acc Offset: 0xE8) Write Protection Status Register */ | |
| } Acc; | |
| #endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ | |
| /* -------- ACC_CR : (ACC Offset: 0x00) Control Register -------- */ | |
| #define ACC_CR_SWRST (0x1u << 0) /**< \brief (ACC_CR) Software Reset */ | |
| /* -------- ACC_MR : (ACC Offset: 0x04) Mode Register -------- */ | |
| #define ACC_MR_SELMINUS_Pos 0 | |
| #define ACC_MR_SELMINUS_Msk (0x7u << ACC_MR_SELMINUS_Pos) /**< \brief (ACC_MR) Selection for Minus Comparator Input */ | |
| #define ACC_MR_SELMINUS(value) ((ACC_MR_SELMINUS_Msk & ((value) << ACC_MR_SELMINUS_Pos))) | |
| #define ACC_MR_SELMINUS_TS (0x0u << 0) /**< \brief (ACC_MR) Select TS */ | |
| #define ACC_MR_SELMINUS_ADVREFP (0x1u << 0) /**< \brief (ACC_MR) Select ADVREFP */ | |
| #define ACC_MR_SELMINUS_DAC0 (0x2u << 0) /**< \brief (ACC_MR) Select DAC0 */ | |
| #define ACC_MR_SELMINUS_DAC1 (0x3u << 0) /**< \brief (ACC_MR) Select DAC1 */ | |
| #define ACC_MR_SELMINUS_AFE0_AD0 (0x4u << 0) /**< \brief (ACC_MR) Select AFE0_AD0 */ | |
| #define ACC_MR_SELMINUS_AFE0_AD1 (0x5u << 0) /**< \brief (ACC_MR) Select AFE0_AD1 */ | |
| #define ACC_MR_SELMINUS_AFE0_AD2 (0x6u << 0) /**< \brief (ACC_MR) Select AFE0_AD2 */ | |
| #define ACC_MR_SELMINUS_AFE0_AD3 (0x7u << 0) /**< \brief (ACC_MR) Select AFE0_AD3 */ | |
| #define ACC_MR_SELPLUS_Pos 4 | |
| #define ACC_MR_SELPLUS_Msk (0x7u << ACC_MR_SELPLUS_Pos) /**< \brief (ACC_MR) Selection For Plus Comparator Input */ | |
| #define ACC_MR_SELPLUS(value) ((ACC_MR_SELPLUS_Msk & ((value) << ACC_MR_SELPLUS_Pos))) | |
| #define ACC_MR_SELPLUS_AFE0_AD0 (0x0u << 4) /**< \brief (ACC_MR) Select AFE0_AD0 */ | |
| #define ACC_MR_SELPLUS_AFE0_AD1 (0x1u << 4) /**< \brief (ACC_MR) Select AFE0_AD1 */ | |
| #define ACC_MR_SELPLUS_AFE0_AD2 (0x2u << 4) /**< \brief (ACC_MR) Select AFE0_AD2 */ | |
| #define ACC_MR_SELPLUS_AFE0_AD3 (0x3u << 4) /**< \brief (ACC_MR) Select AFE0_AD3 */ | |
| #define ACC_MR_SELPLUS_AFE0_AD4 (0x4u << 4) /**< \brief (ACC_MR) Select AFE0_AD4 */ | |
| #define ACC_MR_SELPLUS_AFE0_AD5 (0x5u << 4) /**< \brief (ACC_MR) Select AFE0_AD5 */ | |
| #define ACC_MR_SELPLUS_AFE1_AD0 (0x6u << 4) /**< \brief (ACC_MR) Select AFE1_AD0 */ | |
| #define ACC_MR_SELPLUS_AFE1_AD1 (0x7u << 4) /**< \brief (ACC_MR) Select AFE1_AD1 */ | |
| #define ACC_MR_ACEN (0x1u << 8) /**< \brief (ACC_MR) Analog Comparator Enable */ | |
| #define ACC_MR_ACEN_DIS (0x0u << 8) /**< \brief (ACC_MR) Analog comparator disabled. */ | |
| #define ACC_MR_ACEN_EN (0x1u << 8) /**< \brief (ACC_MR) Analog comparator enabled. */ | |
| #define ACC_MR_EDGETYP_Pos 9 | |
| #define ACC_MR_EDGETYP_Msk (0x3u << ACC_MR_EDGETYP_Pos) /**< \brief (ACC_MR) Edge Type */ | |
| #define ACC_MR_EDGETYP(value) ((ACC_MR_EDGETYP_Msk & ((value) << ACC_MR_EDGETYP_Pos))) | |
| #define ACC_MR_EDGETYP_RISING (0x0u << 9) /**< \brief (ACC_MR) Only rising edge of comparator output */ | |
| #define ACC_MR_EDGETYP_FALLING (0x1u << 9) /**< \brief (ACC_MR) Falling edge of comparator output */ | |
| #define ACC_MR_EDGETYP_ANY (0x2u << 9) /**< \brief (ACC_MR) Any edge of comparator output */ | |
| #define ACC_MR_INV (0x1u << 12) /**< \brief (ACC_MR) Invert Comparator Output */ | |
| #define ACC_MR_INV_DIS (0x0u << 12) /**< \brief (ACC_MR) Analog comparator output is directly processed. */ | |
| #define ACC_MR_INV_EN (0x1u << 12) /**< \brief (ACC_MR) Analog comparator output is inverted prior to being processed. */ | |
| #define ACC_MR_SELFS (0x1u << 13) /**< \brief (ACC_MR) Selection Of Fault Source */ | |
| #define ACC_MR_SELFS_CE (0x0u << 13) /**< \brief (ACC_MR) The CE flag is used to drive the FAULT output. */ | |
| #define ACC_MR_SELFS_OUTPUT (0x1u << 13) /**< \brief (ACC_MR) The output of the analog comparator flag is used to drive the FAULT output. */ | |
| #define ACC_MR_FE (0x1u << 14) /**< \brief (ACC_MR) Fault Enable */ | |
| #define ACC_MR_FE_DIS (0x0u << 14) /**< \brief (ACC_MR) The FAULT output is tied to 0. */ | |
| #define ACC_MR_FE_EN (0x1u << 14) /**< \brief (ACC_MR) The FAULT output is driven by the signal defined by SELFS. */ | |
| /* -------- ACC_IER : (ACC Offset: 0x24) Interrupt Enable Register -------- */ | |
| #define ACC_IER_CE (0x1u << 0) /**< \brief (ACC_IER) Comparison Edge */ | |
| /* -------- ACC_IDR : (ACC Offset: 0x28) Interrupt Disable Register -------- */ | |
| #define ACC_IDR_CE (0x1u << 0) /**< \brief (ACC_IDR) Comparison Edge */ | |
| /* -------- ACC_IMR : (ACC Offset: 0x2C) Interrupt Mask Register -------- */ | |
| #define ACC_IMR_CE (0x1u << 0) /**< \brief (ACC_IMR) Comparison Edge */ | |
| /* -------- ACC_ISR : (ACC Offset: 0x30) Interrupt Status Register -------- */ | |
| #define ACC_ISR_CE (0x1u << 0) /**< \brief (ACC_ISR) Comparison Edge (cleared on read) */ | |
| #define ACC_ISR_SCO (0x1u << 1) /**< \brief (ACC_ISR) Synchronized Comparator Output */ | |
| #define ACC_ISR_MASK (0x1u << 31) /**< \brief (ACC_ISR) Flag Mask */ | |
| /* -------- ACC_ACR : (ACC Offset: 0x94) Analog Control Register -------- */ | |
| #define ACC_ACR_ISEL (0x1u << 0) /**< \brief (ACC_ACR) Current Selection */ | |
| #define ACC_ACR_ISEL_LOPW (0x0u << 0) /**< \brief (ACC_ACR) Low-power option. */ | |
| #define ACC_ACR_ISEL_HISP (0x1u << 0) /**< \brief (ACC_ACR) High-speed option. */ | |
| #define ACC_ACR_HYST_Pos 1 | |
| #define ACC_ACR_HYST_Msk (0x3u << ACC_ACR_HYST_Pos) /**< \brief (ACC_ACR) Hysteresis Selection */ | |
| #define ACC_ACR_HYST(value) ((ACC_ACR_HYST_Msk & ((value) << ACC_ACR_HYST_Pos))) | |
| /* -------- ACC_WPMR : (ACC Offset: 0xE4) Write Protection Mode Register -------- */ | |
| #define ACC_WPMR_WPEN (0x1u << 0) /**< \brief (ACC_WPMR) Write Protection Enable */ | |
| #define ACC_WPMR_WPKEY_Pos 8 | |
| #define ACC_WPMR_WPKEY_Msk (0xffffffu << ACC_WPMR_WPKEY_Pos) /**< \brief (ACC_WPMR) Write Protection Key */ | |
| #define ACC_WPMR_WPKEY(value) ((ACC_WPMR_WPKEY_Msk & ((value) << ACC_WPMR_WPKEY_Pos))) | |
| #define ACC_WPMR_WPKEY_PASSWD (0x414343u << 8) /**< \brief (ACC_WPMR) Writing any other value in this field aborts the write operation of the WPEN bit.Always reads as 0. */ | |
| /* -------- ACC_WPSR : (ACC Offset: 0xE8) Write Protection Status Register -------- */ | |
| #define ACC_WPSR_WPVS (0x1u << 0) /**< \brief (ACC_WPSR) Write Protection Violation Status */ | |
| /*@}*/ | |
| #endif /* _SAME70_ACC_COMPONENT_ */ |