| /** | |
| * \file | |
| * | |
| * Copyright (c) 2015 Atmel Corporation. All rights reserved. | |
| * | |
| * \asf_license_start | |
| * | |
| * \page License | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions are met: | |
| * | |
| * 1. Redistributions of source code must retain the above copyright notice, | |
| * this list of conditions and the following disclaimer. | |
| * | |
| * 2. Redistributions in binary form must reproduce the above copyright notice, | |
| * this list of conditions and the following disclaimer in the documentation | |
| * and/or other materials provided with the distribution. | |
| * | |
| * 3. The name of Atmel may not be used to endorse or promote products derived | |
| * from this software without specific prior written permission. | |
| * | |
| * 4. This software may only be redistributed and used in connection with an | |
| * Atmel microcontroller product. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED | |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF | |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE | |
| * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR | |
| * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN | |
| * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | |
| * POSSIBILITY OF SUCH DAMAGE. | |
| * | |
| * \asf_license_stop | |
| * | |
| */ | |
| /* | |
| * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> | |
| */ | |
| #ifndef _SAME70_UTMI_COMPONENT_ | |
| #define _SAME70_UTMI_COMPONENT_ | |
| /* ============================================================================= */ | |
| /** SOFTWARE API DEFINITION FOR USB Transmitter Interface Macrocell */ | |
| /* ============================================================================= */ | |
| /** \addtogroup SAME70_UTMI USB Transmitter Interface Macrocell */ | |
| /*@{*/ | |
| #if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) | |
| /** \brief Utmi hardware registers */ | |
| typedef struct { | |
| __I uint32_t Reserved1[4]; | |
| __IO uint32_t UTMI_OHCIICR; /**< \brief (Utmi Offset: 0x10) OHCI Interrupt Configuration Register */ | |
| __I uint32_t Reserved2[7]; | |
| __IO uint32_t UTMI_CKTRIM; /**< \brief (Utmi Offset: 0x30) UTMI Clock Trimming Register */ | |
| } Utmi; | |
| #endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ | |
| /* -------- UTMI_OHCIICR : (UTMI Offset: 0x10) OHCI Interrupt Configuration Register -------- */ | |
| #define UTMI_OHCIICR_RES0 (0x1u << 0) /**< \brief (UTMI_OHCIICR) USB PORTx Reset */ | |
| #define UTMI_OHCIICR_ARIE (0x1u << 4) /**< \brief (UTMI_OHCIICR) OHCI Asynchronous Resume Interrupt Enable */ | |
| #define UTMI_OHCIICR_APPSTART (0x1u << 5) /**< \brief (UTMI_OHCIICR) Reserved */ | |
| #define UTMI_OHCIICR_UDPPUDIS (0x1u << 23) /**< \brief (UTMI_OHCIICR) USB Device Pull-up Disable */ | |
| /* -------- UTMI_CKTRIM : (UTMI Offset: 0x30) UTMI Clock Trimming Register -------- */ | |
| #define UTMI_CKTRIM_FREQ_Pos 0 | |
| #define UTMI_CKTRIM_FREQ_Msk (0x3u << UTMI_CKTRIM_FREQ_Pos) /**< \brief (UTMI_CKTRIM) UTMI Reference Clock Frequency */ | |
| #define UTMI_CKTRIM_FREQ(value) ((UTMI_CKTRIM_FREQ_Msk & ((value) << UTMI_CKTRIM_FREQ_Pos))) | |
| #define UTMI_CKTRIM_FREQ_XTAL12 (0x0u << 0) /**< \brief (UTMI_CKTRIM) 12 MHz reference clock */ | |
| #define UTMI_CKTRIM_FREQ_XTAL16 (0x1u << 0) /**< \brief (UTMI_CKTRIM) 16 MHz reference clock */ | |
| /*@}*/ | |
| #endif /* _SAME70_UTMI_COMPONENT_ */ |