| /** | |
| ****************************************************************************** | |
| * @file stm32f10x_dbgmcu.c | |
| * @author MCD Application Team | |
| * @version V3.0.0 | |
| * @date 04/06/2009 | |
| * @brief This file provides all the DBGMCU firmware functions. | |
| ****************************************************************************** | |
| * @copy | |
| * | |
| * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS | |
| * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE | |
| * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY | |
| * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING | |
| * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE | |
| * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. | |
| * | |
| * <h2><center>© COPYRIGHT 2009 STMicroelectronics</center></h2> | |
| */ | |
| /* Includes ------------------------------------------------------------------*/ | |
| #include "stm32f10x_dbgmcu.h" | |
| /** @addtogroup StdPeriph_Driver | |
| * @{ | |
| */ | |
| /** @defgroup DBGMCU | |
| * @brief DBGMCU driver modules | |
| * @{ | |
| */ | |
| /** @defgroup DBGMCU_Private_TypesDefinitions | |
| * @{ | |
| */ | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup DBGMCU_Private_Defines | |
| * @{ | |
| */ | |
| #define IDCODE_DEVID_Mask ((uint32_t)0x00000FFF) | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup DBGMCU_Private_Macros | |
| * @{ | |
| */ | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup DBGMCU_Private_Variables | |
| * @{ | |
| */ | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup DBGMCU_Private_FunctionPrototypes | |
| * @{ | |
| */ | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup DBGMCU_Private_Functions | |
| * @{ | |
| */ | |
| /** | |
| * @brief Returns the device revision identifier. | |
| * @param None | |
| * @retval : Device revision identifier | |
| */ | |
| uint32_t DBGMCU_GetREVID(void) | |
| { | |
| return(DBGMCU->IDCODE >> 16); | |
| } | |
| /** | |
| * @brief Returns the device identifier. | |
| * @param None | |
| * @retval : Device identifier | |
| */ | |
| uint32_t DBGMCU_GetDEVID(void) | |
| { | |
| return(DBGMCU->IDCODE & IDCODE_DEVID_Mask); | |
| } | |
| /** | |
| * @brief Configures the specified peripheral and low power mode behavior | |
| * when the MCU under Debug mode. | |
| * @param DBGMCU_Periph: specifies the peripheral and low power mode. | |
| * This parameter can be any combination of the following values: | |
| * @arg DBGMCU_SLEEP: Keep debugger connection during SLEEP mode | |
| * @arg DBGMCU_STOP: Keep debugger connection during STOP mode | |
| * @arg DBGMCU_STANDBY: Keep debugger connection during STANDBY mode | |
| * @arg DBGMCU_IWDG_STOP: Debug IWDG stopped when Core is halted | |
| * @arg DBGMCU_WWDG_STOP: Debug WWDG stopped when Core is halted | |
| * @arg DBGMCU_TIM1_STOP: TIM1 counter stopped when Core is halted | |
| * @arg DBGMCU_TIM2_STOP: TIM2 counter stopped when Core is halted | |
| * @arg DBGMCU_TIM3_STOP: TIM3 counter stopped when Core is halted | |
| * @arg DBGMCU_TIM4_STOP: TIM4 counter stopped when Core is halted | |
| * @arg DBGMCU_CAN1_STOP: Debug CAN 1 stopped when Core is halted | |
| * @arg DBGMCU_I2C1_SMBUS_TIMEOUT: I2C1 SMBUS timeout mode stopped when Core is | |
| * halted | |
| * @arg DBGMCU_I2C2_SMBUS_TIMEOUT: I2C2 SMBUS timeout mode stopped when Core is | |
| * halted | |
| * @arg DBGMCU_TIM5_STOP: TIM5 counter stopped when Core is halted | |
| * @arg DBGMCU_TIM6_STOP: TIM6 counter stopped when Core is halted | |
| * @arg DBGMCU_TIM7_STOP: TIM7 counter stopped when Core is halted | |
| * @arg DBGMCU_TIM8_STOP: TIM8 counter stopped when Core is halted | |
| * @param NewState: new state of the specified peripheral in Debug mode. | |
| * This parameter can be: ENABLE or DISABLE. | |
| * @retval : None | |
| */ | |
| void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState) | |
| { | |
| /* Check the parameters */ | |
| assert_param(IS_DBGMCU_PERIPH(DBGMCU_Periph)); | |
| assert_param(IS_FUNCTIONAL_STATE(NewState)); | |
| if (NewState != DISABLE) | |
| { | |
| DBGMCU->CR |= DBGMCU_Periph; | |
| } | |
| else | |
| { | |
| DBGMCU->CR &= ~DBGMCU_Periph; | |
| } | |
| } | |
| /** | |
| * @} | |
| */ | |
| /** | |
| * @} | |
| */ | |
| /** | |
| * @} | |
| */ | |
| /******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ |