| ChangeLog for hostapd | |
| 2015-09-27 - v2.5 | |
| * fixed WPS UPnP vulnerability with HTTP chunked transfer encoding | |
| [http://w1.fi/security/2015-2/] (CVE-2015-4141) | |
| * fixed WMM Action frame parser | |
| [http://w1.fi/security/2015-3/] (CVE-2015-4142) | |
| * fixed EAP-pwd server missing payload length validation | |
| [http://w1.fi/security/2015-4/] | |
| (CVE-2015-4143, CVE-2015-4144, CVE-2015-4145) | |
| * fixed validation of WPS and P2P NFC NDEF record payload length | |
| [http://w1.fi/security/2015-5/] | |
| * nl80211: | |
| - fixed vendor command handling to check OUI properly | |
| * fixed hlr_auc_gw build with OpenSSL | |
| * hlr_auc_gw: allow Milenage RES length to be reduced | |
| * disable HT for a station that does not support WMM/QoS | |
| * added support for hashed password (NtHash) in EAP-pwd server | |
| * fixed and extended dynamic VLAN cases | |
| * added EAP-EKE server support for deriving Session-Id | |
| * set Acct-Session-Id to a random value to make it more likely to be | |
| unique even if the device does not have a proper clock | |
| * added more 2.4 GHz channels for 20/40 MHz HT co-ex scan | |
| * modified SAE routines to be more robust and PWE generation to be | |
| stronger against timing attacks | |
| * added support for Brainpool Elliptic Curves with SAE | |
| * increases maximum value accepted for cwmin/cwmax | |
| * added support for CCMP-256 and GCMP-256 as group ciphers with FT | |
| * added Fast Session Transfer (FST) module | |
| * removed optional fields from RSNE when using FT with PMF | |
| (workaround for interoperability issues with iOS 8.4) | |
| * added EAP server support for TLS session resumption | |
| * fixed key derivation for Suite B 192-bit AKM (this breaks | |
| compatibility with the earlier version) | |
| * added mechanism to track unconnected stations and do minimal band | |
| steering | |
| * number of small fixes | |
| 2015-03-15 - v2.4 | |
| * allow OpenSSL cipher configuration to be set for internal EAP server | |
| (openssl_ciphers parameter) | |
| * fixed number of small issues based on hwsim test case failures and | |
| static analyzer reports | |
| * fixed Accounting-Request to not include duplicated Acct-Session-Id | |
| * add support for Acct-Multi-Session-Id in RADIUS Accounting messages | |
| * add support for PMKSA caching with SAE | |
| * add support for generating BSS Load element (bss_load_update_period) | |
| * fixed channel switch from VHT to HT | |
| * add INTERFACE-ENABLED and INTERFACE-DISABLED ctrl_iface events | |
| * add support for learning STA IPv4/IPv6 addresses and configuring | |
| ProxyARP support | |
| * dropped support for the madwifi driver interface | |
| * add support for Suite B (128-bit and 192-bit level) key management and | |
| cipher suites | |
| * fixed a regression with driver=wired | |
| * extend EAPOL-Key msg 1/4 retry workaround for changing SNonce | |
| * add BSS_TM_REQ ctrl_iface command to send BSS Transition Management | |
| Request frames and BSS-TM-RESP event to indicate response to such | |
| frame | |
| * add support for EAP Re-Authentication Protocol (ERP) | |
| * fixed AP IE in EAPOL-Key 3/4 when both WPA and FT was enabled | |
| * fixed a regression in HT 20/40 coex Action frame parsing | |
| * set stdout to be line-buffered | |
| * add support for vendor specific VHT extension to enable 256 QAM rates | |
| (VHT-MCS 8 and 9) on 2.4 GHz band | |
| * RADIUS DAS: | |
| - extend Disconnect-Request processing to allow matching of multiple | |
| sessions | |
| - support Acct-Multi-Session-Id as an identifier | |
| - allow PMKSA cache entry to be removed without association | |
| * expire hostapd STA entry if kernel does not have a matching entry | |
| * allow chanlist to be used to specify a subset of channels for ACS | |
| * improve ACS behavior on 2.4 GHz band and allow channel bias to be | |
| configured with acs_chan_bias parameter | |
| * do not reply to a Probe Request frame that includes DSS Parameter Set | |
| element in which the channel does not match the current operating | |
| channel | |
| * add UPDATE_BEACON ctrl_iface command; this can be used to force Beacon | |
| frame contents to be updated and to start beaconing on an interface | |
| that used start_disabled=1 | |
| * fixed some RADIUS server failover cases | |
| 2014-10-09 - v2.3 | |
| * fixed number of minor issues identified in static analyzer warnings | |
| * fixed DFS and channel switch operation for multi-BSS cases | |
| * started to use constant time comparison for various password and hash | |
| values to reduce possibility of any externally measurable timing | |
| differences | |
| * extended explicit clearing of freed memory and expired keys to avoid | |
| keeping private data in memory longer than necessary | |
| * added support for number of new RADIUS attributes from RFC 7268 | |
| (Mobility-Domain-Id, WLAN-HESSID, WLAN-Pairwise-Cipher, | |
| WLAN-Group-Cipher, WLAN-AKM-Suite, WLAN-Group-Mgmt-Pairwise-Cipher) | |
| * fixed GET_CONFIG wpa_pairwise_cipher value | |
| * added code to clear bridge FDB entry on station disconnection | |
| * fixed PMKSA cache timeout from Session-Timeout for WPA/WPA2 cases | |
| * fixed OKC PMKSA cache entry fetch to avoid a possible infinite loop | |
| in case the first entry does not match | |
| * fixed hostapd_cli action script execution to use more robust mechanism | |
| (CVE-2014-3686) | |
| 2014-06-04 - v2.2 | |
| * fixed SAE confirm-before-commit validation to avoid a potential | |
| segmentation fault in an unexpected message sequence that could be | |
| triggered remotely | |
| * extended VHT support | |
| - Operating Mode Notification | |
| - Power Constraint element (local_pwr_constraint) | |
| - Spectrum management capability (spectrum_mgmt_required=1) | |
| - fix VHT80 segment picking in ACS | |
| - fix vht_capab 'Maximum A-MPDU Length Exponent' handling | |
| - fix VHT20 | |
| * fixed HT40 co-ex scan for some pri/sec channel switches | |
| * extended HT40 co-ex support to allow dynamic channel width changes | |
| during the lifetime of the BSS | |
| * fixed HT40 co-ex support to check for overlapping 20 MHz BSS | |
| * fixed MSCHAP UTF-8 to UCS-2 conversion for three-byte encoding; | |
| this fixes password with include UTF-8 characters that use | |
| three-byte encoding EAP methods that use NtPasswordHash | |
| * reverted TLS certificate validation step change in v2.1 that rejected | |
| any AAA server certificate with id-kp-clientAuth even if | |
| id-kp-serverAuth EKU was included | |
| * fixed STA validation step for WPS ER commands to prevent a potential | |
| crash if an ER sends an unexpected PutWLANResponse to a station that | |
| is disassociated, but not fully removed | |
| * enforce full EAP authentication after RADIUS Disconnect-Request by | |
| removing the PMKSA cache entry | |
| * added support for NAS-IP-Address, NAS-identifier, and NAS-IPv6-Address | |
| in RADIUS Disconnect-Request | |
| * added mechanism for removing addresses for MAC ACLs by prefixing an | |
| entry with "-" | |
| * Interworking/Hotspot 2.0 enhancements | |
| - support Hotspot 2.0 Release 2 | |
| * OSEN network for online signup connection | |
| * subscription remediation (based on RADIUS server request or | |
| control interface HS20_WNM_NOTIF for testing purposes) | |
| * Hotspot 2.0 release number indication in WFA RADIUS VSA | |
| * deauthentication request (based on RADIUS server request or | |
| control interface WNM_DEAUTH_REQ for testing purposes) | |
| * Session Info URL RADIUS AVP to trigger ESS Disassociation Imminent | |
| * hs20_icon config parameter to configure icon files for OSU | |
| * osu_* config parameters for OSU Providers list | |
| - do not use Interworking filtering rules on Probe Request if | |
| Interworking is disabled to avoid interop issues | |
| * added/fixed nl80211 functionality | |
| - AP interface teardown optimization | |
| - support vendor specific driver command | |
| (VENDOR <vendor id> <sub command id> [<hex formatted data>]) | |
| * fixed PMF protection of Deauthentication frame when this is triggered | |
| by session timeout | |
| * internal TLS implementation enhancements/fixes | |
| - add SHA256-based cipher suites | |
| - add DHE-RSA cipher suites | |
| - fix X.509 validation of PKCS#1 signature to check for extra data | |
| * RADIUS server functionality | |
| - add minimal RADIUS accounting server support (hostapd-as-server); | |
| this is mainly to enable testing coverage with hwsim scripts | |
| - allow authentication log to be written into SQLite databse | |
| - added option for TLS protocol testing of an EAP peer by simulating | |
| various misbehaviors/known attacks | |
| - MAC ACL support for testing purposes | |
| * fixed PTK derivation for CCMP-256 and GCMP-256 | |
| * extended WPS per-station PSK to support ER case | |
| * added option to configure the management group cipher | |
| (group_mgmt_cipher=AES-128-CMAC (default), BIP-GMAC-128, BIP-GMAC-256, | |
| BIP-CMAC-256) | |
| * fixed AP mode default TXOP Limit values for AC_VI and AC_VO (these | |
| were rounded incorrectly) | |
| * added support for postponing FT response in case PMK-R1 needs to be | |
| pulled from R0KH | |
| * added option to advertise 40 MHz intolerant HT capability with | |
| ht_capab=[40-INTOLERANT] | |
| * remove WPS 1.0 only support, i.e., WSC 2.0 support is now enabled | |
| whenever CONFIG_WPS=y is set | |
| * EAP-pwd fixes | |
| - fix possible segmentation fault on EAP method deinit if an invalid | |
| group is negotiated | |
| * fixed RADIUS client retransmit/failover behavior | |
| - there was a potential ctash due to freed memory being accessed | |
| - failover to a backup server mechanism did not work properly | |
| * fixed a possible crash on double DISABLE command when multiple BSSes | |
| are enabled | |
| * fixed a memory leak in SAE random number generation | |
| * fixed GTK rekeying when the station uses FT protocol | |
| * fixed off-by-one bounds checking in printf_encode() | |
| - this could result in deinial of service in some EAP server cases | |
| * various bug fixes | |
| 2014-02-04 - v2.1 | |
| * added support for simultaneous authentication of equals (SAE) for | |
| stronger password-based authentication with WPA2-Personal | |
| * added nl80211 functionality | |
| - VHT configuration for nl80211 | |
| - support split wiphy dump | |
| - driver-based MAC ACL | |
| - QoS Mapping configuration | |
| * added fully automated regression testing with mac80211_hwsim | |
| * allow ctrl_iface group to be specified on command line (-G<group>) | |
| * allow single hostapd process to control independent WPS interfaces | |
| (wps_independent=1) instead of synchronized operations through all | |
| configured interfaces within a process | |
| * avoid processing received management frames multiple times when using | |
| nl80211 with multiple BSSes | |
| * added support for DFS (processing radar detection events, CAC, channel | |
| re-selection) | |
| * added EAP-EKE server | |
| * added automatic channel selection (ACS) | |
| * added option for using per-BSS (vif) configuration files with | |
| -b<phyname>:<config file name> | |
| * extended global control interface ADD/REMOVE commands to allow BSSes | |
| of a radio to be removed individually without having to add/remove all | |
| other BSSes of the radio at the same time | |
| * added support for sending debug info to Linux tracing (-T on command | |
| line) | |
| * replace dump_file functionality with same information being available | |
| through the hostapd control interface | |
| * added support for using Protected Dual of Public Action frames for | |
| GAS/ANQP exchanges when PMF is enabled | |
| * added support for WPS+NFC updates | |
| - improved protocol | |
| - option to fetch and report alternative carrier records for external | |
| NFC operations | |
| * various bug fixes | |
| 2013-01-12 - v2.0 | |
| * added AP-STA-DISCONNECTED ctrl_iface event | |
| * improved debug logging (human readable event names, interface name | |
| included in more entries) | |
| * added number of small changes to make it easier for static analyzers | |
| to understand the implementation | |
| * added a workaround for Windows 7 Michael MIC failure reporting and | |
| use of the Secure bit in EAPOL-Key msg 3/4 | |
| * fixed number of small bugs (see git logs for more details) | |
| * changed OpenSSL to read full certificate chain from server_cert file | |
| * nl80211: number of updates to use new cfg80211/nl80211 functionality | |
| - replace monitor interface with nl80211 commands | |
| - additional information for driver-based AP SME | |
| * EAP-pwd: | |
| - fix KDF for group 21 and zero-padding | |
| - added support for fragmentation | |
| - increased maximum number of hunting-and-pecking iterations | |
| * avoid excessive Probe Response retries for broadcast Probe Request | |
| frames (only with drivers using hostapd SME/MLME) | |
| * added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y) | |
| * fixed WPS operation stopping on dual concurrent AP | |
| * added wps_rf_bands configuration parameter for overriding RF Bands | |
| value for WPS | |
| * added support for getting per-device PSK from RADIUS Tunnel-Password | |
| * added support for libnl 3.2 and newer | |
| * increased initial group key handshake retransmit timeout to 500 ms | |
| * added a workaround for 4-way handshake to update SNonce even after | |
| having sent EAPOL-Key 3/4 to avoid issues with some supplicant | |
| implementations that can change SNonce for each EAP-Key 2/4 | |
| * added a workaround for EAPOL-Key 4/4 using incorrect type value in | |
| WPA2 mode (some deployed stations use WPA type in that message) | |
| * added a WPS workaround for mixed mode AP Settings with Windows 7 | |
| * changed WPS AP PIN disabling mechanism to disable the PIN after 10 | |
| consecutive failures in addition to using the exponential lockout | |
| period | |
| * added support for WFA Hotspot 2.0 | |
| - GAS/ANQP advertisement of network information | |
| - disable_dgaf parameter to disable downstream group-addressed | |
| forwarding | |
| * simplified licensing terms by selecting the BSD license as the only | |
| alternative | |
| * EAP-SIM: fixed re-authentication not to update pseudonym | |
| * EAP-SIM: use Notification round before EAP-Failure | |
| * EAP-AKA: added support for AT_COUNTER_TOO_SMALL | |
| * EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized | |
| * EAP-AKA': fixed identity for MK derivation | |
| * EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this | |
| breaks interoperability with older versions | |
| * EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id | |
| * changed ANonce to be a random number instead of Counter-based | |
| * added support for canceling WPS operations with hostapd_cli wps_cancel | |
| * fixed EAP/WPS to PSK transition on reassociation in cases where | |
| deauthentication is missed | |
| * hlr_auc_gw enhancements: | |
| - a new command line parameter -u can be used to enable updating of | |
| SQN in Milenage file | |
| - use 5 bit IND for SQN updates | |
| - SQLite database can now be used to store Milenage information | |
| * EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms | |
| and reauth data | |
| * added support for Chargeable-User-Identity (RFC 4372) | |
| * added radius_auth_req_attr and radius_acct_req_attr configuration | |
| parameters to allow adding/overriding of RADIUS attributes in | |
| Access-Request and Accounting-Request packets | |
| * added support for RADIUS dynamic authorization server (RFC 5176) | |
| * added initial support for WNM operations | |
| - BSS max idle period | |
| - WNM-Sleep Mode | |
| * added new WPS NFC ctrl_iface mechanism | |
| - removed obsoleted WPS_OOB command (including support for deprecated | |
| UFD config_method) | |
| * added FT support for drivers that implement MLME internally | |
| * added SA Query support for drivers that implement MLME internally | |
| * removed default ACM=1 from AC_VO and AC_VI | |
| * changed VENDOR-TEST EAP method to use proper private enterprise number | |
| (this will not interoperate with older versions) | |
| * added hostapd.conf parameter vendor_elements to allow arbitrary vendor | |
| specific elements to be added to the Beacon and Probe Response frames | |
| * added support for configuring GCMP cipher for IEEE 802.11ad | |
| * added support for 256-bit AES with internal TLS implementation | |
| * changed EAPOL transmission to use AC_VO if WMM is active | |
| * fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length | |
| correctly; invalid messages could have caused the hostapd process to | |
| terminate before this fix [CVE-2012-4445] | |
| * limit number of active wildcard PINs for WPS Registrar to one to avoid | |
| confusing behavior with multiple wildcard PINs | |
| * added a workaround for WPS PBC session overlap detection to avoid | |
| interop issues with deployed station implementations that do not | |
| remove active PBC indication from Probe Request frames properly | |
| * added support for using SQLite for the eap_user database | |
| * added Acct-Session-Id attribute into Access-Request messages | |
| * fixed EAPOL frame transmission to non-QoS STAs with nl80211 | |
| (do not send QoS frames if the STA did not negotiate use of QoS for | |
| this association) | |
| 2012-05-10 - v1.0 | |
| * Add channel selection support in hostapd. See hostapd.conf. | |
| * Add support for IEEE 802.11v Time Advertisement mechanism with UTC | |
| TSF offset. See hostapd.conf for config info. | |
| * Delay STA entry removal until Deauth/Disassoc TX status in AP mode. | |
| This allows the driver to use PS buffering of Deauthentication and | |
| Disassociation frames when the STA is in power save sleep. Only | |
| available with drivers that provide TX status events for Deauth/ | |
| Disassoc frames (nl80211). | |
| * Allow PMKSA caching to be disabled on the Authenticator. See | |
| hostap.conf config parameter disable_pmksa_caching. | |
| * atheros: Add support for IEEE 802.11w configuration. | |
| * bsd: Add support for setting HT values in IFM_MMASK. | |
| * Allow client isolation to be configured with ap_isolate. Client | |
| isolation can be used to prevent low-level bridging of frames | |
| between associated stations in the BSS. By default, this bridging | |
| is allowed. | |
| * Allow coexistance of HT BSSes with WEP/TKIP BSSes. | |
| * Add require_ht config parameter, which can be used to configure | |
| hostapd to reject association with any station that does not support | |
| HT PHY. | |
| * Add support for writing debug log to a file using "-f" option. Also | |
| add relog CLI command to re-open the log file. | |
| * Add bridge handling for WDS STA interfaces. By default they are | |
| added to the configured bridge of the AP interface (if present), | |
| but the user can also specify a separate bridge using cli command | |
| wds_bridge. | |
| * hostapd_cli: | |
| - Add wds_bridge command for specifying bridge for WDS STA | |
| interfaces. | |
| - Add relog command for reopening log file. | |
| - Send AP-STA-DISCONNECTED event when an AP disconnects a station | |
| due to inactivity. | |
| - Add wps_config ctrl_interface command for configuring AP. This | |
| command can be used to configure the AP using the internal WPS | |
| registrar. It works in the same way as new AP settings received | |
| from an ER. | |
| - Many WPS/WPS ER commands - see WPS/WPS ER sections for details. | |
| - Add command get version, that returns hostapd version string. | |
| * WNM: Add BSS Transition Management Request for ESS Disassoc Imminent. | |
| Use hostapd_cli ess_disassoc (STA addr) (URL) to send the | |
| notification to the STA. | |
| * Allow AP mode to disconnect STAs based on low ACK condition (when | |
| the data connection is not working properly, e.g., due to the STA | |
| going outside the range of the AP). Disabled by default, enable by | |
| config option disassoc_low_ack. | |
| * Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad | |
| config file. | |
| * WPS: | |
| - Send AP Settings as a wrapped Credential attribute to ctrl_iface | |
| in WPS-NEW-AP-SETTINGS. | |
| - Dispatch more WPS events through hostapd ctrl_iface. | |
| - Add mechanism for indicating non-standard WPS errors. | |
| - Change concurrent radio AP to use only one WPS UPnP instance. | |
| - Add wps_check_pin command for processing PIN from user input. | |
| UIs can use this command to process a PIN entered by a user and to | |
| validate the checksum digit (if present). | |
| - Add hostap_cli get_config command to display current AP config. | |
| - Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at | |
| runtime and support dynamic AP PIN management. | |
| - Disable AP PIN after 10 consecutive failures. Slow down attacks | |
| on failures up to 10. | |
| - Allow AP to start in Enrollee mode without AP PIN for probing, | |
| to be compatible with Windows 7. | |
| - Add Config Error into WPS-FAIL events to provide more info | |
| to the user on how to resolve the issue. | |
| - When controlling multiple interfaces: | |
| - apply WPS commands to all interfaces configured to use WPS | |
| - apply WPS config changes to all interfaces that use WPS | |
| - when an attack is detected on any interface, disable AP PIN on | |
| all interfaces | |
| * WPS ER: | |
| - Show SetSelectedRegistrar events as ctrl_iface events. | |
| - Add special AP Setup Locked mode to allow read only ER. | |
| ap_setup_locked=2 can now be used to enable a special mode where | |
| WPS ER can learn the current AP settings, but cannot change them. | |
| * WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2) | |
| - Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool | |
| for testing protocol extensibility. | |
| - Add build option CONFIG_WPS_STRICT to allow disabling of WPS | |
| workarounds. | |
| - Add support for AuthorizedMACs attribute. | |
| * TDLS: | |
| - Allow TDLS use or TDLS channel switching in the BSS to be | |
| prohibited in the BSS, using config params tdls_prohibit and | |
| tdls_prohibit_chan_switch. | |
| * EAP server: Add support for configuring fragment size (see | |
| fragment_size in hostapd.conf). | |
| * wlantest: Add a tool wlantest for IEEE802.11 protocol testing. | |
| wlantest can be used to capture frames from a monitor interface | |
| for realtime capturing or from pcap files for offline analysis. | |
| * Interworking: Support added for 802.11u. Enable in .config with | |
| CONFIG_INTERWORKING. See hostapd.conf for config parameters for | |
| interworking. | |
| * Android: Add build and runtime support for Android hostapd. | |
| * Add a new debug message level for excessive information. Use | |
| -ddd to enable. | |
| * TLS: Add support for tls_disable_time_checks=1 in client mode. | |
| * Internal TLS: | |
| - Add support for TLS v1.1 (RFC 4346). Enable with build parameter | |
| CONFIG_TLSV11. | |
| - Add domainComponent parser for X.509 names | |
| * Reorder some IEs to get closer to IEEE 802.11 standard. Move | |
| WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames. | |
| Move HT IEs to be later in (Re)Assoc Resp. | |
| * Many bugfixes. | |
| 2010-04-18 - v0.7.2 | |
| * fix WPS internal Registrar use when an external Registrar is also | |
| active | |
| * bsd: Cleaned up driver wrapper and added various low-level | |
| configuration options | |
| * TNC: fixed issues with fragmentation | |
| * EAP-TNC: add Flags field into fragment acknowledgement (needed to | |
| interoperate with other implementations; may potentially breaks | |
| compatibility with older wpa_supplicant/hostapd versions) | |
| * cleaned up driver wrapper API for multi-BSS operations | |
| * nl80211: fix multi-BSS and VLAN operations | |
| * fix number of issues with IEEE 802.11r/FT; this version is not | |
| backwards compatible with old versions | |
| * add SA Query Request processing in AP mode (IEEE 802.11w) | |
| * fix IGTK PN in group rekeying (IEEE 802.11w) | |
| * fix WPS PBC session overlap detection to use correct attribute | |
| * hostapd_notif_Assoc() can now be called with all IEs to simplify | |
| driver wrappers | |
| * work around interoperability issue with some WPS External Registrar | |
| implementations | |
| * nl80211: fix WPS IE update | |
| * hostapd_cli: add support for action script operations (run a script | |
| on hostapd events) | |
| * fix DH padding with internal crypto code (mainly, for WPS) | |
| * fix WPS association with both WPS IE and WPA/RSN IE present with | |
| driver wrappers that use hostapd MLME (e.g., nl80211) | |
| 2010-01-16 - v0.7.1 | |
| * cleaned up driver wrapper API (struct wpa_driver_ops); the new API | |
| is not fully backwards compatible, so out-of-tree driver wrappers | |
| will need modifications | |
| * cleaned up various module interfaces | |
| * merge hostapd and wpa_supplicant developers' documentation into a | |
| single document | |
| * fixed HT Capabilities IE with nl80211 drivers | |
| * moved generic AP functionality code into src/ap | |
| * WPS: handle Selected Registrar as union of info from all Registrars | |
| * remove obsolte Prism54.org driver wrapper | |
| * added internal debugging mechanism with backtrace support and memory | |
| allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) | |
| * EAP-FAST server: piggyback Phase 2 start with the end of Phase 1 | |
| * WPS: add support for dynamically selecting whether to provision the | |
| PSK as an ASCII passphrase or PSK | |
| * added support for WDS (4-address frame) mode with per-station virtual | |
| interfaces (wds_sta=1 in config file; only supported with | |
| driver=nl80211 for now) | |
| * fixed WPS Probe Request processing to handle missing required | |
| attribute | |
| * fixed PKCS#12 use with OpenSSL 1.0.0 | |
| * detect bridge interface automatically so that bridge parameter in | |
| hostapd.conf becomes optional (though, it may now be used to | |
| automatically add then WLAN interface into a bridge with | |
| driver=nl80211) | |
| 2009-11-21 - v0.7.0 | |
| * increased hostapd_cli ping interval to 5 seconds and made this | |
| configurable with a new command line options (-G<seconds>) | |
| * driver_nl80211: use Linux socket filter to improve performance | |
| * added support for external Registrars with WPS (UPnP transport) | |
| * 802.11n: scan for overlapping BSSes before starting 20/40 MHz channel | |
| * driver_nl80211: fixed STA accounting data collection (TX/RX bytes | |
| reported correctly; TX/RX packets not yet available from kernel) | |
| * added support for WPS USBA out-of-band mechanism with USB Flash | |
| Drives (UFD) (CONFIG_WPS_UFD=y) | |
| * fixed EAPOL/EAP reauthentication when using an external RADIUS | |
| authentication server | |
| * fixed TNC with EAP-TTLS | |
| * fixed IEEE 802.11r key derivation function to match with the standard | |
| (note: this breaks interoperability with previous version) [Bug 303] | |
| * fixed SHA-256 based key derivation function to match with the | |
| standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) | |
| (note: this breaks interoperability with previous version) [Bug 307] | |
| * added number of code size optimizations to remove unnecessary | |
| functionality from the program binary based on build configuration | |
| (part of this automatic; part configurable with CONFIG_NO_* build | |
| options) | |
| * use shared driver wrapper files with wpa_supplicant | |
| * driver_nl80211: multiple updates to provide support for new Linux | |
| nl80211/mac80211 functionality | |
| * updated management frame protection to use IEEE Std 802.11w-2009 | |
| * fixed number of small WPS issues and added workarounds to | |
| interoperate with common deployed broken implementations | |
| * added some IEEE 802.11n co-existence rules to disable 40 MHz channels | |
| or modify primary/secondary channels if needed based on neighboring | |
| networks | |
| * added support for NFC out-of-band mechanism with WPS | |
| * added preliminary support for IEEE 802.11r RIC processing | |
| 2009-01-06 - v0.6.7 | |
| * added support for Wi-Fi Protected Setup (WPS) | |
| (hostapd can now be configured to act as an integrated WPS Registrar | |
| and provision credentials for WPS Enrollees using PIN and PBC | |
| methods; external wireless Registrar can configure the AP, but | |
| external WLAN Manager Registrars are not supported); WPS support can | |
| be enabled by adding CONFIG_WPS=y into .config and setting the | |
| runtime configuration variables in hostapd.conf (see WPS section in | |
| the example configuration file); new hostapd_cli commands wps_pin and | |
| wps_pbc are used to configure WPS negotiation; see README-WPS for | |
| more details | |
| * added IEEE 802.11n HT capability configuration (ht_capab) | |
| * added support for generating Country IE based on nl80211 regulatory | |
| information (added if ieee80211d=1 in configuration) | |
| * fixed WEP authentication (both Open System and Shared Key) with | |
| mac80211 | |
| * added support for EAP-AKA' (draft-arkko-eap-aka-kdf) | |
| * added support for using driver_test over UDP socket | |
| * changed EAP-GPSK to use the IANA assigned EAP method type 51 | |
| * updated management frame protection to use IEEE 802.11w/D7.0 | |
| * fixed retransmission of EAP requests if no response is received | |
| 2008-11-23 - v0.6.6 | |
| * added a new configuration option, wpa_ptk_rekey, that can be used to | |
| enforce frequent PTK rekeying, e.g., to mitigate some attacks against | |
| TKIP deficiencies | |
| * updated OpenSSL code for EAP-FAST to use an updated version of the | |
| session ticket overriding API that was included into the upstream | |
| OpenSSL 0.9.9 tree on 2008-11-15 (no additional OpenSSL patch is | |
| needed with that version anymore) | |
| * changed channel flags configuration to read the information from | |
| the driver (e.g., via driver_nl80211 when using mac80211) instead of | |
| using hostapd as the source of the regulatory information (i.e., | |
| information from CRDA is now used with mac80211); this allows 5 GHz | |
| channels to be used with hostapd (if allowed in the current | |
| regulatory domain) | |
| * fixed EAP-TLS message processing for the last TLS message if it is | |
| large enough to require fragmentation (e.g., if a large Session | |
| Ticket data is included) | |
| * fixed listen interval configuration for nl80211 drivers | |
| 2008-11-01 - v0.6.5 | |
| * added support for SHA-256 as X.509 certificate digest when using the | |
| internal X.509/TLSv1 implementation | |
| * fixed EAP-FAST PAC-Opaque padding (0.6.4 broke this for some peer | |
| identity lengths) | |
| * fixed internal TLSv1 implementation for abbreviated handshake (used | |
| by EAP-FAST server) | |
| * added support for setting VLAN ID for STAs based on local MAC ACL | |
| (accept_mac_file) as an alternative for RADIUS server-based | |
| configuration | |
| * updated management frame protection to use IEEE 802.11w/D6.0 | |
| (adds a new association ping to protect against unauthenticated | |
| authenticate or (re)associate request frames dropping association) | |
| * added support for using SHA256-based stronger key derivation for WPA2 | |
| (IEEE 802.11w) | |
| * added new "driver wrapper" for RADIUS-only configuration | |
| (driver=none in hostapd.conf; CONFIG_DRIVER_NONE=y in .config) | |
| * fixed WPA/RSN IE validation to verify that the proto (WPA vs. WPA2) | |
| is enabled in configuration | |
| * changed EAP-FAST configuration to use separate fields for A-ID and | |
| A-ID-Info (eap_fast_a_id_info) to allow A-ID to be set to a fixed | |
| 16-octet len binary value for better interoperability with some peer | |
| implementations; eap_fast_a_id is now configured as a hex string | |
| * driver_nl80211: Updated to match the current Linux mac80211 AP mode | |
| configuration (wireless-testing.git and Linux kernel releases | |
| starting from 2.6.29) | |
| 2008-08-10 - v0.6.4 | |
| * added peer identity into EAP-FAST PAC-Opaque and skip Phase 2 | |
| Identity Request if identity is already known | |
| * added support for EAP Sequences in EAP-FAST Phase 2 | |
| * added support for EAP-TNC (Trusted Network Connect) | |
| (this version implements the EAP-TNC method and EAP-TTLS/EAP-FAST | |
| changes needed to run two methods in sequence (IF-T) and the IF-IMV | |
| and IF-TNCCS interfaces from TNCS) | |
| * added support for optional cryptobinding with PEAPv0 | |
| * added fragmentation support for EAP-TNC | |
| * added support for fragmenting EAP-TTLS/PEAP/FAST Phase 2 (tunneled) | |
| data | |
| * added support for opportunistic key caching (OKC) | |
| 2008-02-22 - v0.6.3 | |
| * fixed Reassociation Response callback processing when using internal | |
| MLME (driver_{hostap,nl80211,test}.c) | |
| * updated FT support to use the latest draft, IEEE 802.11r/D9.0 | |
| * copy optional Proxy-State attributes into RADIUS response when acting | |
| as a RADIUS authentication server | |
| * fixed EAPOL state machine to handle a case in which no response is | |
| received from the RADIUS authentication server; previous version | |
| could have triggered a crash in some cases after a timeout | |
| * fixed EAP-SIM/AKA realm processing to allow decorated usernames to | |
| be used | |
| * added a workaround for EAP-SIM/AKA peers that include incorrect null | |
| termination in the username | |
| * fixed EAP-SIM/AKA protected result indication to include AT_COUNTER | |
| attribute in notification messages only when using fast | |
| reauthentication | |
| * fixed EAP-SIM Start response processing for fast reauthentication | |
| case | |
| * added support for pending EAP processing in EAP-{PEAP,TTLS,FAST} | |
| phase 2 to allow EAP-SIM and EAP-AKA to be used as the Phase 2 method | |
| 2008-01-01 - v0.6.2 | |
| * fixed EAP-SIM and EAP-AKA message parser to validate attribute | |
| lengths properly to avoid potential crash caused by invalid messages | |
| * added data structure for storing allocated buffers (struct wpabuf); | |
| this does not affect hostapd usage, but many of the APIs changed | |
| and various interfaces (e.g., EAP) is not compatible with old | |
| versions | |
| * added support for protecting EAP-AKA/Identity messages with | |
| AT_CHECKCODE (optional feature in RFC 4187) | |
| * added support for protected result indication with AT_RESULT_IND for | |
| EAP-SIM and EAP-AKA (eap_sim_aka_result_ind=1) | |
| * added support for configuring EAP-TTLS phase 2 non-EAP methods in | |
| EAP server configuration; previously all four were enabled for every | |
| phase 2 user, now all four are disabled by default and need to be | |
| enabled with new method names TTLS-PAP, TTLS-CHAP, TTLS-MSCHAP, | |
| TTLS-MSCHAPV2 | |
| * removed old debug printing mechanism and the related 'debug' | |
| parameter in the configuration file; debug verbosity is now set with | |
| -d (or -dd) command line arguments | |
| * added support for EAP-IKEv2 (draft-tschofenig-eap-ikev2-15.txt); | |
| only shared key/password authentication is supported in this version | |
| 2007-11-24 - v0.6.1 | |
| * added experimental, integrated TLSv1 server implementation with the | |
| needed X.509/ASN.1/RSA/bignum processing (this can be enabled by | |
| setting CONFIG_TLS=internal and CONFIG_INTERNAL_LIBTOMMATH=y in | |
| .config); this can be useful, e.g., if the target system does not | |
| have a suitable TLS library and a minimal code size is required | |
| * added support for EAP-FAST server method to the integrated EAP | |
| server | |
| * updated EAP Generalized Pre-Shared Key (EAP-GPSK) to use the latest | |
| draft (draft-ietf-emu-eap-gpsk-07.txt) | |
| * added a new configuration parameter, rsn_pairwise, to allow different | |
| pairwise cipher suites to be enabled for WPA and RSN/WPA2 | |
| (note: if wpa_pairwise differs from rsn_pairwise, the driver will | |
| either need to support this or will have to use the WPA/RSN IEs from | |
| hostapd; currently, the included madwifi and bsd driver interfaces do | |
| not have support for this) | |
| * updated FT support to use the latest draft, IEEE 802.11r/D8.0 | |
| 2007-05-28 - v0.6.0 | |
| * added experimental IEEE 802.11r/D6.0 support | |
| * updated EAP-SAKE to RFC 4763 and the IANA-allocated EAP type 48 | |
| * updated EAP-PSK to use the IANA-allocated EAP type 47 | |
| * fixed EAP-PSK bit ordering of the Flags field | |
| * fixed configuration reloading (SIGHUP) to re-initialize WPA PSKs | |
| by reading wpa_psk_file [Bug 181] | |
| * fixed EAP-TTLS AVP parser processing for too short AVP lengths | |
| * fixed IPv6 connection to RADIUS accounting server | |
| * updated EAP Generalized Pre-Shared Key (EAP-GPSK) to use the latest | |
| draft (draft-ietf-emu-eap-gpsk-04.txt) | |
| * hlr_auc_gw: read GSM triplet file into memory and rotate through the | |
| entries instead of only using the same three triplets every time | |
| (this does not work properly with tests using multiple clients, but | |
| provides bit better triplet data for testing a single client; anyway, | |
| if a better quality triplets are needed, GSM-Milenage should be used | |
| instead of hardcoded triplet file) | |
| * fixed EAP-MSCHAPv2 server to use a space between S and M parameters | |
| in Success Request [Bug 203] | |
| * added support for sending EAP-AKA Notifications in error cases | |
| * updated to use IEEE 802.11w/D2.0 for management frame protection | |
| (still experimental) | |
| * RADIUS server: added support for processing duplicate messages | |
| (retransmissions from RADIUS client) by replying with the previous | |
| reply | |
| 2006-11-24 - v0.5.6 | |
| * added support for configuring and controlling multiple BSSes per | |
| radio interface (bss=<ifname> in hostapd.conf); this is only | |
| available with Devicescape and test driver interfaces | |
| * fixed PMKSA cache update in the end of successful RSN | |
| pre-authentication | |
| * added support for dynamic VLAN configuration (i.e., selecting VLAN-ID | |
| for each STA based on RADIUS Access-Accept attributes); this requires | |
| VLAN support from the kernel driver/802.11 stack and this is | |
| currently only available with Devicescape and test driver interfaces | |
| * driver_madwifi: fixed configuration of unencrypted modes (plaintext | |
| and IEEE 802.1X without WEP) | |
| * removed STAKey handshake since PeerKey handshake has replaced it in | |
| IEEE 802.11ma and there are no known deployments of STAKey | |
| * updated EAP Generalized Pre-Shared Key (EAP-GPSK) to use the latest | |
| draft (draft-ietf-emu-eap-gpsk-01.txt) | |
| * added preliminary implementation of IEEE 802.11w/D1.0 (management | |
| frame protection) | |
| (Note: this requires driver support to work properly.) | |
| (Note2: IEEE 802.11w is an unapproved draft and subject to change.) | |
| * hlr_auc_gw: added support for GSM-Milenage (for EAP-SIM) | |
| * hlr_auc_gw: added support for reading per-IMSI Milenage keys and | |
| parameters from a text file to make it possible to implement proper | |
| GSM/UMTS authentication server for multiple SIM/USIM cards using | |
| EAP-SIM/EAP-AKA | |
| * fixed session timeout processing with drivers that do not use | |
| ieee802_11.c (e.g., madwifi) | |
| 2006-08-27 - v0.5.5 | |
| * added 'hostapd_cli new_sta <addr>' command for adding a new STA into | |
| hostapd (e.g., to initialize wired network authentication based on an | |
| external signal) | |
| * fixed hostapd to add PMKID KDE into 4-Way Handshake Message 1 when | |
| using WPA2 even if PMKSA caching is not used | |
| * added -P<pid file> argument for hostapd to write the current process | |
| id into a file | |
| * added support for RADIUS Authentication Server MIB (RFC 2619) | |
| 2006-06-20 - v0.5.4 | |
| * fixed nt_password_hash build [Bug 144] | |
| * added PeerKey handshake implementation for IEEE 802.11e | |
| direct link setup (DLS) to replace STAKey handshake | |
| * added support for EAP Generalized Pre-Shared Key (EAP-GPSK, | |
| draft-clancy-emu-eap-shared-secret-00.txt) | |
| * fixed a segmentation fault when RSN pre-authentication was completed | |
| successfully [Bug 152] | |
| 2006-04-27 - v0.5.3 | |
| * do not build nt_password_hash and hlr_auc_gw by default to avoid | |
| requiring a TLS library for a successful build; these programs can be | |
| build with 'make nt_password_hash' and 'make hlr_auc_gw' | |
| * added a new configuration option, eapol_version, that can be used to | |
| set EAPOL version to 1 (default is 2) to work around broken client | |
| implementations that drop EAPOL frames which use version number 2 | |
| [Bug 89] | |
| * added support for EAP-SAKE (no EAP method number allocated yet, so | |
| this is using the same experimental type 255 as EAP-PSK) | |
| * fixed EAP-MSCHAPv2 message length validation | |
| 2006-03-19 - v0.5.2 | |
| * fixed stdarg use in hostapd_logger(): if both stdout and syslog | |
| logging was enabled, hostapd could trigger a segmentation fault in | |
| vsyslog on some CPU -- C library combinations | |
| * moved HLR/AuC gateway implementation for EAP-SIM/AKA into an external | |
| program to make it easier to use for implementing real SS7 gateway; | |
| eap_sim_db is not anymore used as a file name for GSM authentication | |
| triplets; instead, it is path to UNIX domain socket that will be used | |
| to communicate with the external gateway program (e.g., hlr_auc_gw) | |
| * added example HLR/AuC gateway implementation, hlr_auc_gw, that uses | |
| local information (GSM authentication triplets from a text file and | |
| hardcoded AKA authentication data); this can be used to test EAP-SIM | |
| and EAP-AKA | |
| * added Milenage algorithm (example 3GPP AKA algorithm) to hlr_auc_gw | |
| to make it possible to test EAP-AKA with real USIM cards (this is | |
| disabled by default; define AKA_USE_MILENAGE when building hlr_auc_gw | |
| to enable this) | |
| * driver_madwifi: added support for getting station RSN IE from | |
| madwifi-ng svn r1453 and newer; this fixes RSN that was apparently | |
| broken with earlier change (r1357) in the driver | |
| * changed EAP method registration to use a dynamic list of methods | |
| instead of a static list generated at build time | |
| * fixed WPA message 3/4 not to encrypt Key Data field (WPA IE) | |
| [Bug 125] | |
| * added ap_max_inactivity configuration parameter | |
| 2006-01-29 - v0.5.1 | |
| * driver_test: added better support for multiple APs and STAs by using | |
| a directory with sockets that include MAC address for each device in | |
| the name (test_socket=DIR:/tmp/test) | |
| * added support for EAP expanded type (vendor specific EAP methods) | |
| 2005-12-18 - v0.5.0 (beginning of 0.5.x development releases) | |
| * added experimental STAKey handshake implementation for IEEE 802.11e | |
| direct link setup (DLS); note: this is disabled by default in both | |
| build and runtime configuration (can be enabled with CONFIG_STAKEY=y | |
| and stakey=1) | |
| * added support for EAP methods to use callbacks to external programs | |
| by buffering a pending request and processing it after the EAP method | |
| is ready to continue | |
| * improved EAP-SIM database interface to allow external request to GSM | |
| HLR/AuC without blocking hostapd process | |
| * added support for using EAP-SIM pseudonyms and fast re-authentication | |
| * added support for EAP-AKA in the integrated EAP authenticator | |
| * added support for matching EAP identity prefixes (e.g., "1"*) in EAP | |
| user database to allow EAP-SIM/AKA selection without extra roundtrip | |
| for EAP-Nak negotiation | |
| * added support for storing EAP user password as NtPasswordHash instead | |
| of plaintext password when using MSCHAP or MSCHAPv2 for | |
| authentication (hash:<16-octet hex value>); added nt_password_hash | |
| tool for hashing password to generate NtPasswordHash | |
| 2005-11-20 - v0.4.7 (beginning of 0.4.x stable releases) | |
| * driver_wired: fixed EAPOL sending to optionally use PAE group address | |
| as the destination instead of supplicant MAC address; this is | |
| disabled by default, but should be enabled with use_pae_group_addr=1 | |
| in configuration file if the wired interface is used by only one | |
| device at the time (common switch configuration) | |
| * driver_madwifi: configure driver to use TKIP countermeasures in order | |
| to get correct behavior (IEEE 802.11 association failing; previously, | |
| association succeeded, but hostpad forced disassociation immediately) | |
| * driver_madwifi: added support for madwifi-ng | |
| 2005-10-27 - v0.4.6 | |
| * added support for replacing user identity from EAP with RADIUS | |
| User-Name attribute from Access-Accept message, if that is included, | |
| for the RADIUS accounting messages (e.g., for EAP-PEAP/TTLS to get | |
| tunneled identity into accounting messages when the RADIUS server | |
| does not support better way of doing this with Class attribute) | |
| * driver_madwifi: fixed EAPOL packet receive for configuration where | |
| ath# is part of a bridge interface | |
| * added a configuration file and log analyzer script for logwatch | |
| * fixed EAPOL state machine step function to process all state | |
| transitions before processing new events; this resolves a race | |
| condition in which EAPOL-Start message could trigger hostapd to send | |
| two EAP-Response/Identity frames to the authentication server | |
| 2005-09-25 - v0.4.5 | |
| * added client CA list to the TLS certificate request in order to make | |
| it easier for the client to select which certificate to use | |
| * added experimental support for EAP-PSK | |
| * added support for WE-19 (hostap, madwifi) | |
| 2005-08-21 - v0.4.4 | |
| * fixed build without CONFIG_RSN_PREAUTH | |
| * fixed FreeBSD build | |
| 2005-06-26 - v0.4.3 | |
| * fixed PMKSA caching to copy User-Name and Class attributes so that | |
| RADIUS accounting gets correct information | |
| * start RADIUS accounting only after successful completion of WPA | |
| 4-Way Handshake if WPA-PSK is used | |
| * fixed PMKSA caching for the case where STA (re)associates without | |
| first disassociating | |
| 2005-06-12 - v0.4.2 | |
| * EAP-PAX is now registered as EAP type 46 | |
| * fixed EAP-PAX MAC calculation | |
| * fixed EAP-PAX CK and ICK key derivation | |
| * renamed eap_authenticator configuration variable to eap_server to | |
| better match with RFC 3748 (EAP) terminology | |
| * driver_test: added support for testing hostapd with wpa_supplicant | |
| by using test driver interface without any kernel drivers or network | |
| cards | |
| 2005-05-22 - v0.4.1 | |
| * fixed RADIUS server initialization when only auth or acct server | |
| is configured and the other one is left empty | |
| * driver_madwifi: added support for RADIUS accounting | |
| * driver_madwifi: added preliminary support for compiling against 'BSD' | |
| branch of madwifi CVS tree | |
| * driver_madwifi: fixed pairwise key removal to allow WPA reauth | |
| without disassociation | |
| * added support for reading additional certificates from PKCS#12 files | |
| and adding them to the certificate chain | |
| * fixed RADIUS Class attribute processing to only use Access-Accept | |
| packets to update Class; previously, other RADIUS authentication | |
| packets could have cleared Class attribute | |
| * added support for more than one Class attribute in RADIUS packets | |
| * added support for verifying certificate revocation list (CRL) when | |
| using integrated EAP authenticator for EAP-TLS; new hostapd.conf | |
| options 'check_crl'; CRL must be included in the ca_cert file for now | |
| 2005-04-25 - v0.4.0 (beginning of 0.4.x development releases) | |
| * added support for including network information into | |
| EAP-Request/Identity message (ASCII-0 (nul) in eap_message) | |
| (e.g., to implement draft-adrange-eap-network-discovery-07.txt) | |
| * fixed a bug which caused some RSN pre-authentication cases to use | |
| freed memory and potentially crash hostapd | |
| * fixed private key loading for cases where passphrase is not set | |
| * added support for sending TLS alerts and aborting authentication | |
| when receiving a TLS alert | |
| * fixed WPA2 to add PMKSA cache entry when using integrated EAP | |
| authenticator | |
| * fixed PMKSA caching (EAP authentication was not skipped correctly | |
| with the new state machine changes from IEEE 802.1X draft) | |
| * added support for RADIUS over IPv6; own_ip_addr, auth_server_addr, | |
| and acct_server_addr can now be IPv6 addresses (CONFIG_IPV6=y needs | |
| to be added to .config to include IPv6 support); for RADIUS server, | |
| radius_server_ipv6=1 needs to be set in hostapd.conf and addresses | |
| in RADIUS clients file can then use IPv6 format | |
| * added experimental support for EAP-PAX | |
| * replaced hostapd control interface library (hostapd_ctrl.[ch]) with | |
| the same implementation that wpa_supplicant is using (wpa_ctrl.[ch]) | |
| 2005-02-12 - v0.3.7 (beginning of 0.3.x stable releases) | |
| 2005-01-23 - v0.3.5 | |
| * added support for configuring a forced PEAP version based on the | |
| Phase 1 identity | |
| * fixed PEAPv1 to use tunneled EAP-Success/Failure instead of EAP-TLV | |
| to terminate authentication | |
| * fixed EAP identifier duplicate processing with the new IEEE 802.1X | |
| draft | |
| * clear accounting data in the driver when starting a new accounting | |
| session | |
| * driver_madwifi: filter wireless events based on ifindex to allow more | |
| than one network interface to be used | |
| * fixed WPA message 2/4 processing not to cancel timeout for TimeoutEvt | |
| setting if the packet does not pass MIC verification (e.g., due to | |
| incorrect PSK); previously, message 1/4 was not tried again if an | |
| invalid message 2/4 was received | |
| * fixed reconfiguration of RADIUS client retransmission timer when | |
| adding a new message to the pending list; previously, timer was not | |
| updated at this point and if there was a pending message with long | |
| time for the next retry, the new message needed to wait that long for | |
| its first retry, too | |
| 2005-01-09 - v0.3.4 | |
| * added support for configuring multiple allowed EAP types for Phase 2 | |
| authentication (EAP-PEAP, EAP-TTLS) | |
| * fixed EAPOL-Start processing to trigger WPA reauthentication | |
| (previously, only EAPOL authentication was done) | |
| 2005-01-02 - v0.3.3 | |
| * added support for EAP-PEAP in the integrated EAP authenticator | |
| * added support for EAP-GTC in the integrated EAP authenticator | |
| * added support for configuring list of EAP methods for Phase 1 so that | |
| the integrated EAP authenticator can, e.g., use the wildcard entry | |
| for EAP-TLS and EAP-PEAP | |
| * added support for EAP-TTLS in the integrated EAP authenticator | |
| * added support for EAP-SIM in the integrated EAP authenticator | |
| * added support for using hostapd as a RADIUS authentication server | |
| with the integrated EAP authenticator taking care of EAP | |
| authentication (new hostapd.conf options: radius_server_clients and | |
| radius_server_auth_port); this is not included in default build; use | |
| CONFIG_RADIUS_SERVER=y in .config to include | |
| 2004-12-19 - v0.3.2 | |
| * removed 'daemonize' configuration file option since it has not really | |
| been used at all for more than year | |
| * driver_madwifi: fixed group key setup and added get_ssid method | |
| * added support for EAP-MSCHAPv2 in the integrated EAP authenticator | |
| 2004-12-12 - v0.3.1 | |
| * added support for integrated EAP-TLS authentication (new hostapd.conf | |
| variables: ca_cert, server_cert, private_key, private_key_passwd); | |
| this enabled dynamic keying (WPA2/WPA/IEEE 802.1X/WEP) without | |
| external RADIUS server | |
| * added support for reading PKCS#12 (PFX) files (as a replacement for | |
| PEM/DER) to get certificate and private key (CONFIG_PKCS12) | |
| 2004-12-05 - v0.3.0 (beginning of 0.3.x development releases) | |
| * added support for Acct-{Input,Output}-Gigawords | |
| * added support for Event-Timestamp (in RADIUS Accounting-Requests) | |
| * added support for RADIUS Authentication Client MIB (RFC2618) | |
| * added support for RADIUS Accounting Client MIB (RFC2620) | |
| * made EAP re-authentication period configurable (eap_reauth_period) | |
| * fixed EAPOL reauthentication to trigger WPA/WPA2 reauthentication | |
| * fixed EAPOL state machine to stop if STA is removed during | |
| eapol_sm_step(); this fixes at least one segfault triggering bug with | |
| IEEE 802.11i pre-authentication | |
| * added support for multiple WPA pre-shared keys (e.g., one for each | |
| client MAC address or keys shared by a group of clients); | |
| new hostapd.conf field wpa_psk_file for setting path to a text file | |
| containing PSKs, see hostapd.wpa_psk for an example | |
| * added support for multiple driver interfaces to allow hostapd to be | |
| used with other drivers | |
| * added wired authenticator driver interface (driver=wired in | |
| hostapd.conf, see wired.conf for example configuration) | |
| * added madwifi driver interface (driver=madwifi in hostapd.conf, see | |
| madwifi.conf for example configuration; Note: include files from | |
| madwifi project is needed for building and a configuration file, | |
| .config, needs to be created in hostapd directory with | |
| CONFIG_DRIVER_MADWIFI=y to include this driver interface in hostapd | |
| build) | |
| * fixed an alignment issue that could cause SHA-1 to fail on some | |
| platforms (e.g., Intel ixp425 with a compiler that does not 32-bit | |
| align variables) | |
| * fixed RADIUS reconnection after an error in sending interim | |
| accounting packets | |
| * added hostapd control interface for external programs and an example | |
| CLI, hostapd_cli (like wpa_cli for wpa_supplicant) | |
| * started adding dot11, dot1x, radius MIBs ('hostapd_cli mib', | |
| 'hostapd_cli sta <addr>') | |
| * finished update from IEEE 802.1X-2001 to IEEE 802.1X-REV (now d11) | |
| * added support for strict GTK rekeying (wpa_strict_rekey in | |
| hostapd.conf) | |
| * updated IAPP to use UDP port 3517 and multicast address 224.0.1.178 | |
| (instead of broadcast) for IAPP ADD-notify (moved from draft 3 to | |
| IEEE 802.11F-2003) | |
| * added Prism54 driver interface (driver=prism54 in hostapd.conf; | |
| note: .config needs to be created in hostapd directory with | |
| CONFIG_DRIVER_PRISM54=y to include this driver interface in hostapd | |
| build) | |
| * dual-licensed hostapd (GPLv2 and BSD licenses) | |
| * fixed RADIUS accounting to generate a new session id for cases where | |
| a station reassociates without first being complete deauthenticated | |
| * fixed STA disassociation handler to mark next timeout state to | |
| deauthenticate the station, i.e., skip long wait for inactivity poll | |
| and extra disassociation, if the STA disassociates without | |
| deauthenticating | |
| * added integrated EAP authenticator that can be used instead of | |
| external RADIUS authentication server; currently, only EAP-MD5 is | |
| supported, so this cannot yet be used for key distribution; the EAP | |
| method interface is generic, though, so adding new EAP methods should | |
| be straightforward; new hostapd.conf variables: 'eap_authenticator' | |
| and 'eap_user_file'; this obsoletes "minimal authentication server" | |
| ('minimal_eap' in hostapd.conf) which is now removed | |
| * added support for FreeBSD and driver interface for the BSD net80211 | |
| layer (driver=bsd in hostapd.conf and CONFIG_DRIVER_BSD=y in | |
| .config); please note that some of the required kernel mods have not | |
| yet been committed | |
| 2004-07-17 - v0.2.4 (beginning of 0.2.x stable releases) | |
| * fixed some accounting cases where Accounting-Start was sent when | |
| IEEE 802.1X port was being deauthorized | |
| 2004-06-20 - v0.2.3 | |
| * modified RADIUS client to re-connect the socket in case of certain | |
| error codes that are generated when a network interface state is | |
| changes (e.g., when IP address changes or the interface is set UP) | |
| * fixed couple of cases where EAPOL state for a station was freed | |
| twice causing a segfault for hostapd | |
| * fixed couple of bugs in processing WPA deauthentication (freed data | |
| was used) | |
| 2004-05-31 - v0.2.2 | |
| * fixed WPA/WPA2 group rekeying to use key index correctly (GN/GM) | |
| * fixed group rekeying to send zero TSC in EAPOL-Key messages to fix | |
| cases where STAs dropped multicast frames as replay attacks | |
| * added support for copying RADIUS Attribute 'Class' from | |
| authentication messages into accounting messages | |
| * send canned EAP failure if RADIUS server sends Access-Reject without | |
| EAP message (previously, Supplicant was not notified in this case) | |
| * fixed mixed WPA-PSK and WPA-EAP mode to work with WPA-PSK (i.e., do | |
| not start EAPOL state machines if the STA selected to use WPA-PSK) | |
| 2004-05-06 - v0.2.1 | |
| * added WPA and IEEE 802.11i/RSN (WPA2) Authenticator functionality | |
| - based on IEEE 802.11i/D10.0 but modified to interoperate with WPA | |
| (i.e., IEEE 802.11i/D3.0) | |
| - supports WPA-only, RSN-only, and mixed WPA/RSN mode | |
| - both WPA-PSK and WPA-RADIUS/EAP are supported | |
| - PMKSA caching and pre-authentication | |
| - new hostapd.conf variables: wpa, wpa_psk, wpa_passphrase, | |
| wpa_key_mgmt, wpa_pairwise, wpa_group_rekey, wpa_gmk_rekey, | |
| rsn_preauth, rsn_preauth_interfaces | |
| * fixed interim accounting to remove any pending accounting messages | |
| to the STA before sending a new one | |
| 2004-02-15 - v0.2.0 | |
| * added support for Acct-Interim-Interval: | |
| - draft-ietf-radius-acct-interim-01.txt | |
| - use Acct-Interim-Interval attribute from Access-Accept if local | |
| 'radius_acct_interim_interval' is not set | |
| - allow different update intervals for each STA | |
| * fixed event loop to call signal handlers only after returning from | |
| the real signal handler | |
| * reset sta->timeout_next after successful association to make sure | |
| that the previously registered inactivity timer will not remove the | |
| STA immediately (e.g., if STA deauthenticates and re-associates | |
| before the timer is triggered). | |
| * added new hostapd.conf variable, nas_identifier, that can be used to | |
| add an optional RADIUS Attribute, NAS-Identifier, into authentication | |
| and accounting messages | |
| * added support for Accounting-On and Accounting-Off messages | |
| * fixed accounting session handling to send Accounting-Start only once | |
| per session and not to send Accounting-Stop if the session was not | |
| initialized properly | |
| * fixed Accounting-Stop statistics in cases where the message was | |
| previously sent after the kernel entry for the STA (and/or IEEE | |
| 802.1X data) was removed | |
| Note: | |
| Older changes up to and including v0.1.0 are included in the ChangeLog | |
| of the Host AP driver. |