hostapd/defconfig - nest-guard/1.0/hostap - Git at Google


            
            # Example hostapd build time configuration

            
            #

            
            # This file lists the configuration options that are used when building the

            
            # hostapd binary. All lines starting with # are ignored. Configuration option

            
            # lines must be commented out complete, if they are not to be included, i.e.,

            
            # just setting VARIABLE=n is not disabling that variable.

            
            #

            
            # This file is included in Makefile, so variables like CFLAGS and LIBS can also

            
            # be modified from here. In most cass, these lines should use += in order not

            
            # to override previous values of the variables.


            # Driver interface for Host AP driver

            
            CONFIG_DRIVER_HOSTAP=y


            # Driver interface for wired authenticator

            
            #CONFIG_DRIVER_WIRED=y


            # Driver interface for drivers using the nl80211 kernel interface

            
            CONFIG_DRIVER_NL80211=y


            # driver_nl80211.c requires libnl. If you are compiling it yourself

            
            # you may need to point hostapd to your version of libnl.

            
            #

            
            #CFLAGS += -I$<path to libnl include files>

            
            #LIBS += -L$<path to libnl library files>


            # Use libnl v2.0 (or 3.0) libraries.

            
            #CONFIG_LIBNL20=y


            # Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)

            
            #CONFIG_LIBNL32=y


            # Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)

            
            #CONFIG_DRIVER_BSD=y

            
            #CFLAGS += -I/usr/local/include

            
            #LIBS += -L/usr/local/lib

            
            #LIBS_p += -L/usr/local/lib

            
            #LIBS_c += -L/usr/local/lib


            # Driver interface for no driver (e.g., RADIUS server only)

            
            #CONFIG_DRIVER_NONE=y


            # IEEE 802.11F/IAPP

            
            CONFIG_IAPP=y


            # WPA2/IEEE 802.11i RSN pre-authentication

            
            CONFIG_RSN_PREAUTH=y


            # PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)

            
            CONFIG_PEERKEY=y


            # IEEE 802.11w (management frame protection)

            
            CONFIG_IEEE80211W=y


            # Integrated EAP server

            
            CONFIG_EAP=y


            # EAP Re-authentication Protocol (ERP) in integrated EAP server

            
            CONFIG_ERP=y


            # EAP-MD5 for the integrated EAP server

            
            CONFIG_EAP_MD5=y


            # EAP-TLS for the integrated EAP server

            
            CONFIG_EAP_TLS=y


            # EAP-MSCHAPv2 for the integrated EAP server

            
            CONFIG_EAP_MSCHAPV2=y


            # EAP-PEAP for the integrated EAP server

            
            CONFIG_EAP_PEAP=y


            # EAP-GTC for the integrated EAP server

            
            CONFIG_EAP_GTC=y


            # EAP-TTLS for the integrated EAP server

            
            CONFIG_EAP_TTLS=y


            # EAP-SIM for the integrated EAP server

            
            #CONFIG_EAP_SIM=y


            # EAP-AKA for the integrated EAP server

            
            #CONFIG_EAP_AKA=y


            # EAP-AKA' for the integrated EAP server

            
            # This requires CONFIG_EAP_AKA to be enabled, too.

            
            #CONFIG_EAP_AKA_PRIME=y


            # EAP-PAX for the integrated EAP server

            
            #CONFIG_EAP_PAX=y


            # EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)

            
            #CONFIG_EAP_PSK=y


            # EAP-pwd for the integrated EAP server (secure authentication with a password)

            
            #CONFIG_EAP_PWD=y


            # EAP-SAKE for the integrated EAP server

            
            #CONFIG_EAP_SAKE=y


            # EAP-GPSK for the integrated EAP server

            
            #CONFIG_EAP_GPSK=y

            
            # Include support for optional SHA256 cipher suite in EAP-GPSK

            
            #CONFIG_EAP_GPSK_SHA256=y


            # EAP-FAST for the integrated EAP server

            
            # Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed

            
            # for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g.,

            
            # with openssl-0.9.8x-tls-extensions.patch, to add the needed functions.

            
            #CONFIG_EAP_FAST=y


            # Wi-Fi Protected Setup (WPS)

            
            #CONFIG_WPS=y

            
            # Enable UPnP support for external WPS Registrars

            
            #CONFIG_WPS_UPNP=y

            
            # Enable WPS support with NFC config method

            
            #CONFIG_WPS_NFC=y


            # EAP-IKEv2

            
            #CONFIG_EAP_IKEV2=y


            # Trusted Network Connect (EAP-TNC)

            
            #CONFIG_EAP_TNC=y


            # EAP-EKE for the integrated EAP server

            
            #CONFIG_EAP_EKE=y


            # PKCS#12 (PFX) support (used to read private key and certificate file from

            
            # a file that usually has extension .p12 or .pfx)

            
            CONFIG_PKCS12=y


            # RADIUS authentication server. This provides access to the integrated EAP

            
            # server from external hosts using RADIUS.

            
            #CONFIG_RADIUS_SERVER=y


            # Build IPv6 support for RADIUS operations

            
            CONFIG_IPV6=y


            # IEEE Std 802.11r-2008 (Fast BSS Transition)

            
            #CONFIG_IEEE80211R=y


            # Use the hostapd's IEEE 802.11 authentication (ACL), but without

            
            # the IEEE 802.11 Management capability (e.g., FreeBSD/net80211)

            
            #CONFIG_DRIVER_RADIUS_ACL=y


            # IEEE 802.11n (High Throughput) support

            
            #CONFIG_IEEE80211N=y


            # Wireless Network Management (IEEE Std 802.11v-2011)

            
            # Note: This is experimental and not complete implementation.

            
            #CONFIG_WNM=y


            # IEEE 802.11ac (Very High Throughput) support

            
            #CONFIG_IEEE80211AC=y


            # Remove debugging code that is printing out debug messages to stdout.

            
            # This can be used to reduce the size of the hostapd considerably if debugging

            
            # code is not needed.

            
            #CONFIG_NO_STDOUT_DEBUG=y


            # Add support for writing debug log to a file: -f /tmp/hostapd.log

            
            # Disabled by default.

            
            #CONFIG_DEBUG_FILE=y


            # Add support for sending all debug messages (regardless of debug verbosity)

            
            # to the Linux kernel tracing facility. This helps debug the entire stack by

            
            # making it easy to record everything happening from the driver up into the

            
            # same file, e.g., using trace-cmd.

            
            #CONFIG_DEBUG_LINUX_TRACING=y


            # Remove support for RADIUS accounting

            
            #CONFIG_NO_ACCOUNTING=y


            # Remove support for RADIUS

            
            #CONFIG_NO_RADIUS=y


            # Remove support for VLANs

            
            #CONFIG_NO_VLAN=y


            # Enable support for fully dynamic VLANs. This enables hostapd to

            
            # automatically create bridge and VLAN interfaces if necessary.

            
            #CONFIG_FULL_DYNAMIC_VLAN=y


            # Use netlink-based kernel API for VLAN operations instead of ioctl()

            
            # Note: This requires libnl 3.1 or newer.

            
            #CONFIG_VLAN_NETLINK=y


            # Remove support for dumping internal state through control interface commands

            
            # This can be used to reduce binary size at the cost of disabling a debugging

            
            # option.

            
            #CONFIG_NO_DUMP_STATE=y


            # Enable tracing code for developer debugging

            
            # This tracks use of memory allocations and other registrations and reports

            
            # incorrect use with a backtrace of call (or allocation) location.

            
            #CONFIG_WPA_TRACE=y

            
            # For BSD, comment out these.

            
            #LIBS += -lexecinfo

            
            #LIBS_p += -lexecinfo

            
            #LIBS_c += -lexecinfo


            # Use libbfd to get more details for developer debugging

            
            # This enables use of libbfd to get more detailed symbols for the backtraces

            
            # generated by CONFIG_WPA_TRACE=y.

            
            #CONFIG_WPA_TRACE_BFD=y

            
            # For BSD, comment out these.

            
            #LIBS += -lbfd -liberty -lz

            
            #LIBS_p += -lbfd -liberty -lz

            
            #LIBS_c += -lbfd -liberty -lz


            # hostapd depends on strong random number generation being available from the

            
            # operating system. os_get_random() function is used to fetch random data when

            
            # needed, e.g., for key generation. On Linux and BSD systems, this works by

            
            # reading /dev/urandom. It should be noted that the OS entropy pool needs to be

            
            # properly initialized before hostapd is started. This is important especially

            
            # on embedded devices that do not have a hardware random number generator and

            
            # may by default start up with minimal entropy available for random number

            
            # generation.

            
            #

            
            # As a safety net, hostapd is by default trying to internally collect

            
            # additional entropy for generating random data to mix in with the data

            
            # fetched from the OS. This by itself is not considered to be very strong, but

            
            # it may help in cases where the system pool is not initialized properly.

            
            # However, it is very strongly recommended that the system pool is initialized

            
            # with enough entropy either by using hardware assisted random number

            
            # generator or by storing state over device reboots.

            
            #

            
            # hostapd can be configured to maintain its own entropy store over restarts to

            
            # enhance random number generation. This is not perfect, but it is much more

            
            # secure than using the same sequence of random numbers after every reboot.

            
            # This can be enabled with -e<entropy file> command line option. The specified

            
            # file needs to be readable and writable by hostapd.

            
            #

            
            # If the os_get_random() is known to provide strong random data (e.g., on

            
            # Linux/BSD, the board in question is known to have reliable source of random

            
            # data from /dev/urandom), the internal hostapd random pool can be disabled.

            
            # This will save some in binary size and CPU use. However, this should only be

            
            # considered for builds that are known to be used on devices that meet the

            
            # requirements described above.

            
            #CONFIG_NO_RANDOM_POOL=y


            # Should we use poll instead of select? Select is used by default.

            
            #CONFIG_ELOOP_POLL=y


            # Should we use epoll instead of select? Select is used by default.

            
            #CONFIG_ELOOP_EPOLL=y


            # Select TLS implementation

            
            # openssl = OpenSSL (default)

            
            # gnutls = GnuTLS

            
            # internal = Internal TLSv1 implementation (experimental)

            
            # none = Empty template

            
            #CONFIG_TLS=openssl


            # TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)

            
            # can be enabled to get a stronger construction of messages when block ciphers

            
            # are used.

            
            #CONFIG_TLSV11=y


            # TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)

            
            # can be enabled to enable use of stronger crypto algorithms.

            
            #CONFIG_TLSV12=y


            # If CONFIG_TLS=internal is used, additional library and include paths are

            
            # needed for LibTomMath. Alternatively, an integrated, minimal version of

            
            # LibTomMath can be used. See beginning of libtommath.c for details on benefits

            
            # and drawbacks of this option.

            
            #CONFIG_INTERNAL_LIBTOMMATH=y

            
            #ifndef CONFIG_INTERNAL_LIBTOMMATH

            
            #LTM_PATH=/usr/src/libtommath-0.39

            
            #CFLAGS += -I$(LTM_PATH)

            
            #LIBS += -L$(LTM_PATH)

            
            #LIBS_p += -L$(LTM_PATH)

            
            #endif

            
            # At the cost of about 4 kB of additional binary size, the internal LibTomMath

            
            # can be configured to include faster routines for exptmod, sqr, and div to

            
            # speed up DH and RSA calculation considerably

            
            #CONFIG_INTERNAL_LIBTOMMATH_FAST=y


            # Interworking (IEEE 802.11u)

            
            # This can be used to enable functionality to improve interworking with

            
            # external networks.

            
            #CONFIG_INTERWORKING=y


            # Hotspot 2.0

            
            #CONFIG_HS20=y


            # Enable SQLite database support in hlr_auc_gw, EAP-SIM DB, and eap_user_file

            
            #CONFIG_SQLITE=y


            # Enable Fast Session Transfer (FST)

            
            #CONFIG_FST=y


            # Enable CLI commands for FST testing

            
            #CONFIG_FST_TEST=y


            # Testing options

            
            # This can be used to enable some testing options (see also the example

            
            # configuration file) that are really useful only for testing clients that

            
            # connect to this hostapd. These options allow, for example, to drop a

            
            # certain percentage of probe requests or auth/(re)assoc frames.

            
            #

            
            #CONFIG_TESTING_OPTIONS=y


            # Automatic Channel Selection

            
            # This will allow hostapd to pick the channel automatically when channel is set

            
            # to "acs_survey" or "0". Eventually, other ACS algorithms can be added in

            
            # similar way.

            
            #

            
            # Automatic selection is currently only done through initialization, later on

            
            # we hope to do background checks to keep us moving to more ideal channels as

            
            # time goes by. ACS is currently only supported through the nl80211 driver and

            
            # your driver must have survey dump capability that is filled by the driver

            
            # during scanning.

            
            #

            
            # You can customize the ACS survey algorithm with the hostapd.conf variable

            
            # acs_num_scans.

            
            #

            
            # Supported ACS drivers:

            
            # * ath9k

            
            # * ath5k

            
            # * ath10k

            
            #

            
            # For more details refer to:

            
            # http://wireless.kernel.org/en/users/Documentation/acs

            
            #

            
            #CONFIG_ACS=y
	# Example hostapd build time configuration
	#
	# This file lists the configuration options that are used when building the
	# hostapd binary. All lines starting with # are ignored. Configuration option
	# lines must be commented out complete, if they are not to be included, i.e.,
	# just setting VARIABLE=n is not disabling that variable.
	#
	# This file is included in Makefile, so variables like CFLAGS and LIBS can also
	# be modified from here. In most cass, these lines should use += in order not
	# to override previous values of the variables.

	# Driver interface for Host AP driver
	CONFIG_DRIVER_HOSTAP=y

	# Driver interface for wired authenticator
	#CONFIG_DRIVER_WIRED=y

	# Driver interface for drivers using the nl80211 kernel interface
	CONFIG_DRIVER_NL80211=y

	# driver_nl80211.c requires libnl. If you are compiling it yourself
	# you may need to point hostapd to your version of libnl.
	#
	#CFLAGS += -I$<path to libnl include files>
	#LIBS += -L$<path to libnl library files>

	# Use libnl v2.0 (or 3.0) libraries.
	#CONFIG_LIBNL20=y

	# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
	#CONFIG_LIBNL32=y


	# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
	#CONFIG_DRIVER_BSD=y
	#CFLAGS += -I/usr/local/include
	#LIBS += -L/usr/local/lib
	#LIBS_p += -L/usr/local/lib
	#LIBS_c += -L/usr/local/lib

	# Driver interface for no driver (e.g., RADIUS server only)
	#CONFIG_DRIVER_NONE=y

	# IEEE 802.11F/IAPP
	CONFIG_IAPP=y

	# WPA2/IEEE 802.11i RSN pre-authentication
	CONFIG_RSN_PREAUTH=y

	# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
	CONFIG_PEERKEY=y

	# IEEE 802.11w (management frame protection)
	CONFIG_IEEE80211W=y

	# Integrated EAP server
	CONFIG_EAP=y

	# EAP Re-authentication Protocol (ERP) in integrated EAP server
	CONFIG_ERP=y

	# EAP-MD5 for the integrated EAP server
	CONFIG_EAP_MD5=y

	# EAP-TLS for the integrated EAP server
	CONFIG_EAP_TLS=y

	# EAP-MSCHAPv2 for the integrated EAP server
	CONFIG_EAP_MSCHAPV2=y

	# EAP-PEAP for the integrated EAP server
	CONFIG_EAP_PEAP=y

	# EAP-GTC for the integrated EAP server
	CONFIG_EAP_GTC=y

	# EAP-TTLS for the integrated EAP server
	CONFIG_EAP_TTLS=y

	# EAP-SIM for the integrated EAP server
	#CONFIG_EAP_SIM=y

	# EAP-AKA for the integrated EAP server
	#CONFIG_EAP_AKA=y

	# EAP-AKA' for the integrated EAP server
	# This requires CONFIG_EAP_AKA to be enabled, too.
	#CONFIG_EAP_AKA_PRIME=y

	# EAP-PAX for the integrated EAP server
	#CONFIG_EAP_PAX=y

	# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
	#CONFIG_EAP_PSK=y

	# EAP-pwd for the integrated EAP server (secure authentication with a password)
	#CONFIG_EAP_PWD=y

	# EAP-SAKE for the integrated EAP server
	#CONFIG_EAP_SAKE=y

	# EAP-GPSK for the integrated EAP server
	#CONFIG_EAP_GPSK=y
	# Include support for optional SHA256 cipher suite in EAP-GPSK
	#CONFIG_EAP_GPSK_SHA256=y

	# EAP-FAST for the integrated EAP server
	# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed
	# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g.,
	# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions.
	#CONFIG_EAP_FAST=y

	# Wi-Fi Protected Setup (WPS)
	#CONFIG_WPS=y
	# Enable UPnP support for external WPS Registrars
	#CONFIG_WPS_UPNP=y
	# Enable WPS support with NFC config method
	#CONFIG_WPS_NFC=y

	# EAP-IKEv2
	#CONFIG_EAP_IKEV2=y

	# Trusted Network Connect (EAP-TNC)
	#CONFIG_EAP_TNC=y

	# EAP-EKE for the integrated EAP server
	#CONFIG_EAP_EKE=y

	# PKCS#12 (PFX) support (used to read private key and certificate file from
	# a file that usually has extension .p12 or .pfx)
	CONFIG_PKCS12=y

	# RADIUS authentication server. This provides access to the integrated EAP
	# server from external hosts using RADIUS.
	#CONFIG_RADIUS_SERVER=y

	# Build IPv6 support for RADIUS operations
	CONFIG_IPV6=y

	# IEEE Std 802.11r-2008 (Fast BSS Transition)
	#CONFIG_IEEE80211R=y

	# Use the hostapd's IEEE 802.11 authentication (ACL), but without
	# the IEEE 802.11 Management capability (e.g., FreeBSD/net80211)
	#CONFIG_DRIVER_RADIUS_ACL=y

	# IEEE 802.11n (High Throughput) support
	#CONFIG_IEEE80211N=y

	# Wireless Network Management (IEEE Std 802.11v-2011)
	# Note: This is experimental and not complete implementation.
	#CONFIG_WNM=y

	# IEEE 802.11ac (Very High Throughput) support
	#CONFIG_IEEE80211AC=y

	# Remove debugging code that is printing out debug messages to stdout.
	# This can be used to reduce the size of the hostapd considerably if debugging
	# code is not needed.
	#CONFIG_NO_STDOUT_DEBUG=y

	# Add support for writing debug log to a file: -f /tmp/hostapd.log
	# Disabled by default.
	#CONFIG_DEBUG_FILE=y

	# Add support for sending all debug messages (regardless of debug verbosity)
	# to the Linux kernel tracing facility. This helps debug the entire stack by
	# making it easy to record everything happening from the driver up into the
	# same file, e.g., using trace-cmd.
	#CONFIG_DEBUG_LINUX_TRACING=y

	# Remove support for RADIUS accounting
	#CONFIG_NO_ACCOUNTING=y

	# Remove support for RADIUS
	#CONFIG_NO_RADIUS=y

	# Remove support for VLANs
	#CONFIG_NO_VLAN=y

	# Enable support for fully dynamic VLANs. This enables hostapd to
	# automatically create bridge and VLAN interfaces if necessary.
	#CONFIG_FULL_DYNAMIC_VLAN=y

	# Use netlink-based kernel API for VLAN operations instead of ioctl()
	# Note: This requires libnl 3.1 or newer.
	#CONFIG_VLAN_NETLINK=y

	# Remove support for dumping internal state through control interface commands
	# This can be used to reduce binary size at the cost of disabling a debugging
	# option.
	#CONFIG_NO_DUMP_STATE=y

	# Enable tracing code for developer debugging
	# This tracks use of memory allocations and other registrations and reports
	# incorrect use with a backtrace of call (or allocation) location.
	#CONFIG_WPA_TRACE=y
	# For BSD, comment out these.
	#LIBS += -lexecinfo
	#LIBS_p += -lexecinfo
	#LIBS_c += -lexecinfo

	# Use libbfd to get more details for developer debugging
	# This enables use of libbfd to get more detailed symbols for the backtraces
	# generated by CONFIG_WPA_TRACE=y.
	#CONFIG_WPA_TRACE_BFD=y
	# For BSD, comment out these.
	#LIBS += -lbfd -liberty -lz
	#LIBS_p += -lbfd -liberty -lz
	#LIBS_c += -lbfd -liberty -lz

	# hostapd depends on strong random number generation being available from the
	# operating system. os_get_random() function is used to fetch random data when
	# needed, e.g., for key generation. On Linux and BSD systems, this works by
	# reading /dev/urandom. It should be noted that the OS entropy pool needs to be
	# properly initialized before hostapd is started. This is important especially
	# on embedded devices that do not have a hardware random number generator and
	# may by default start up with minimal entropy available for random number
	# generation.
	#
	# As a safety net, hostapd is by default trying to internally collect
	# additional entropy for generating random data to mix in with the data
	# fetched from the OS. This by itself is not considered to be very strong, but
	# it may help in cases where the system pool is not initialized properly.
	# However, it is very strongly recommended that the system pool is initialized
	# with enough entropy either by using hardware assisted random number
	# generator or by storing state over device reboots.
	#
	# hostapd can be configured to maintain its own entropy store over restarts to
	# enhance random number generation. This is not perfect, but it is much more
	# secure than using the same sequence of random numbers after every reboot.
	# This can be enabled with -e<entropy file> command line option. The specified
	# file needs to be readable and writable by hostapd.
	#
	# If the os_get_random() is known to provide strong random data (e.g., on
	# Linux/BSD, the board in question is known to have reliable source of random
	# data from /dev/urandom), the internal hostapd random pool can be disabled.
	# This will save some in binary size and CPU use. However, this should only be
	# considered for builds that are known to be used on devices that meet the
	# requirements described above.
	#CONFIG_NO_RANDOM_POOL=y

	# Should we use poll instead of select? Select is used by default.
	#CONFIG_ELOOP_POLL=y

	# Should we use epoll instead of select? Select is used by default.
	#CONFIG_ELOOP_EPOLL=y

	# Select TLS implementation
	# openssl = OpenSSL (default)
	# gnutls = GnuTLS
	# internal = Internal TLSv1 implementation (experimental)
	# none = Empty template
	#CONFIG_TLS=openssl

	# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
	# can be enabled to get a stronger construction of messages when block ciphers
	# are used.
	#CONFIG_TLSV11=y

	# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
	# can be enabled to enable use of stronger crypto algorithms.
	#CONFIG_TLSV12=y

	# If CONFIG_TLS=internal is used, additional library and include paths are
	# needed for LibTomMath. Alternatively, an integrated, minimal version of
	# LibTomMath can be used. See beginning of libtommath.c for details on benefits
	# and drawbacks of this option.
	#CONFIG_INTERNAL_LIBTOMMATH=y
	#ifndef CONFIG_INTERNAL_LIBTOMMATH
	#LTM_PATH=/usr/src/libtommath-0.39
	#CFLAGS += -I$(LTM_PATH)
	#LIBS += -L$(LTM_PATH)
	#LIBS_p += -L$(LTM_PATH)
	#endif
	# At the cost of about 4 kB of additional binary size, the internal LibTomMath
	# can be configured to include faster routines for exptmod, sqr, and div to
	# speed up DH and RSA calculation considerably
	#CONFIG_INTERNAL_LIBTOMMATH_FAST=y

	# Interworking (IEEE 802.11u)
	# This can be used to enable functionality to improve interworking with
	# external networks.
	#CONFIG_INTERWORKING=y

	# Hotspot 2.0
	#CONFIG_HS20=y

	# Enable SQLite database support in hlr_auc_gw, EAP-SIM DB, and eap_user_file
	#CONFIG_SQLITE=y

	# Enable Fast Session Transfer (FST)
	#CONFIG_FST=y

	# Enable CLI commands for FST testing
	#CONFIG_FST_TEST=y

	# Testing options
	# This can be used to enable some testing options (see also the example
	# configuration file) that are really useful only for testing clients that
	# connect to this hostapd. These options allow, for example, to drop a
	# certain percentage of probe requests or auth/(re)assoc frames.
	#
	#CONFIG_TESTING_OPTIONS=y

	# Automatic Channel Selection
	# This will allow hostapd to pick the channel automatically when channel is set
	# to "acs_survey" or "0". Eventually, other ACS algorithms can be added in
	# similar way.
	#
	# Automatic selection is currently only done through initialization, later on
	# we hope to do background checks to keep us moving to more ideal channels as
	# time goes by. ACS is currently only supported through the nl80211 driver and
	# your driver must have survey dump capability that is filled by the driver
	# during scanning.
	#
	# You can customize the ACS survey algorithm with the hostapd.conf variable
	# acs_num_scans.
	#
	# Supported ACS drivers:
	# * ath9k
	# * ath5k
	# * ath10k
	#
	# For more details refer to:
	# http://wireless.kernel.org/en/users/Documentation/acs
	#
	#CONFIG_ACS=y