| What: /sys/class/genwqe/genwqe<n>_card/version | |
| Date: Oct 2013 | |
| Contact: haver@linux.vnet.ibm.com | |
| Description: Unique bitstream identification e.g. | |
| '0000000330336283.00000000475a4950'. | |
| What: /sys/class/genwqe/genwqe<n>_card/appid | |
| Date: Oct 2013 | |
| Contact: haver@linux.vnet.ibm.com | |
| Description: Identifies the currently active card application e.g. 'GZIP' | |
| for compression/decompression. | |
| What: /sys/class/genwqe/genwqe<n>_card/type | |
| Date: Oct 2013 | |
| Contact: haver@linux.vnet.ibm.com | |
| Description: Type of the card e.g. 'GenWQE5-A7'. | |
| What: /sys/class/genwqe/genwqe<n>_card/curr_bitstream | |
| Date: Oct 2013 | |
| Contact: haver@linux.vnet.ibm.com | |
| Description: Currently active bitstream. 1 is default, 0 is backup. | |
| What: /sys/class/genwqe/genwqe<n>_card/next_bitstream | |
| Date: Oct 2013 | |
| Contact: haver@linux.vnet.ibm.com | |
| Description: Interface to set the next bitstream to be used. | |
| What: /sys/class/genwqe/genwqe<n>_card/reload_bitstream | |
| Date: May 2014 | |
| Contact: klebers@linux.vnet.ibm.com | |
| Description: Interface to trigger a PCIe card reset to reload the bitstream. | |
| sudo sh -c 'echo 1 > \ | |
| /sys/class/genwqe/genwqe0_card/reload_bitstream' | |
| If successfully, the card will come back with the bitstream set | |
| on 'next_bitstream'. | |
| What: /sys/class/genwqe/genwqe<n>_card/tempsens | |
| Date: Oct 2013 | |
| Contact: haver@linux.vnet.ibm.com | |
| Description: Interface to read the cards temperature sense register. | |
| What: /sys/class/genwqe/genwqe<n>_card/freerunning_timer | |
| Date: Oct 2013 | |
| Contact: haver@linux.vnet.ibm.com | |
| Description: Interface to read the cards free running timer. | |
| Used for performance and utilization measurements. | |
| What: /sys/class/genwqe/genwqe<n>_card/queue_working_time | |
| Date: Oct 2013 | |
| Contact: haver@linux.vnet.ibm.com | |
| Description: Interface to read queue working time. | |
| Used for performance and utilization measurements. | |
| What: /sys/class/genwqe/genwqe<n>_card/state | |
| Date: Oct 2013 | |
| Contact: haver@linux.vnet.ibm.com | |
| Description: State of the card: "unused", "used", "error". | |
| What: /sys/class/genwqe/genwqe<n>_card/base_clock | |
| Date: Oct 2013 | |
| Contact: haver@linux.vnet.ibm.com | |
| Description: Base clock frequency of the card. | |
| What: /sys/class/genwqe/genwqe<n>_card/device/sriov_numvfs | |
| Date: Oct 2013 | |
| Contact: haver@linux.vnet.ibm.com | |
| Description: Enable VFs (1..15): | |
| sudo sh -c 'echo 15 > \ | |
| /sys/bus/pci/devices/0000\:1b\:00.0/sriov_numvfs' | |
| Disable VFs: | |
| Write a 0 into the same sysfs entry. |