| Kernel driver max16064 | |
| ====================== | |
| Supported chips: | |
| * Maxim MAX16064 | |
| Prefix: 'max16064' | |
| Addresses scanned: - | |
| Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX16064.pdf | |
| Author: Guenter Roeck <linux@roeck-us.net> | |
| Description | |
| ----------- | |
| This driver supports hardware montoring for Maxim MAX16064 Quad Power-Supply | |
| Controller with Active-Voltage Output Control and PMBus Interface. | |
| The driver is a client driver to the core PMBus driver. | |
| Please see Documentation/hwmon/pmbus for details on PMBus client drivers. | |
| Usage Notes | |
| ----------- | |
| This driver does not auto-detect devices. You will have to instantiate the | |
| devices explicitly. Please see Documentation/i2c/instantiating-devices for | |
| details. | |
| Platform data support | |
| --------------------- | |
| The driver supports standard PMBus driver platform data. | |
| Sysfs entries | |
| ------------- | |
| The following attributes are supported. Limits are read-write; all other | |
| attributes are read-only. | |
| in[1-4]_label "vout[1-4]" | |
| in[1-4]_input Measured voltage. From READ_VOUT register. | |
| in[1-4]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register. | |
| in[1-4]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. | |
| in[1-4]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register. | |
| in[1-4]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register. | |
| in[1-4]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. | |
| in[1-4]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. | |
| in[1-4]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status. | |
| in[1-4]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status. | |
| in[1-4]_highest Historical maximum voltage. | |
| in[1-4]_reset_history Write any value to reset history. | |
| temp1_input Measured temperature. From READ_TEMPERATURE_1 register. | |
| temp1_max Maximum temperature. From OT_WARN_LIMIT register. | |
| temp1_crit Critical high temperature. From OT_FAULT_LIMIT register. | |
| temp1_max_alarm Chip temperature high alarm. Set by comparing | |
| READ_TEMPERATURE_1 with OT_WARN_LIMIT if TEMP_OT_WARNING | |
| status is set. | |
| temp1_crit_alarm Chip temperature critical high alarm. Set by comparing | |
| READ_TEMPERATURE_1 with OT_FAULT_LIMIT if TEMP_OT_FAULT | |
| status is set. | |
| temp1_highest Historical maximum temperature. | |
| temp1_reset_history Write any value to reset history. |