blob: 19575e06111435c2481dde3f7a21167b48ef514f [file] [log] [blame]
/* arch/arm/mach-s3c2410/include/mach/regs-gpioj.h
*
* Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
* http://www.simtec.co.uk/products/SWLINUX/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* S3C2440 GPIO J register definitions
*/
#ifndef __ASM_ARCH_REGS_GPIOJ_H
#define __ASM_ARCH_REGS_GPIOJ_H "gpioj"
/* Port J consists of 13 GPIO/Camera pins
*
* GPJCON has 2 bits for each of the input pins on port F
* 00 = 0 input, 1 output, 2 Camera
*
* pull up works like all other ports.
*/
#define S3C2413_GPJCON S3C2410_GPIOREG(0x80)
#define S3C2413_GPJDAT S3C2410_GPIOREG(0x84)
#define S3C2413_GPJUP S3C2410_GPIOREG(0x88)
#define S3C2413_GPJSLPCON S3C2410_GPIOREG(0x8C)
#define S3C2440_GPJ0_OUTP (0x01 << 0)
#define S3C2440_GPJ0_CAMDATA0 (0x02 << 0)
#define S3C2440_GPJ1_OUTP (0x01 << 2)
#define S3C2440_GPJ1_CAMDATA1 (0x02 << 2)
#define S3C2440_GPJ2_OUTP (0x01 << 4)
#define S3C2440_GPJ2_CAMDATA2 (0x02 << 4)
#define S3C2440_GPJ3_OUTP (0x01 << 6)
#define S3C2440_GPJ3_CAMDATA3 (0x02 << 6)
#define S3C2440_GPJ4_OUTP (0x01 << 8)
#define S3C2440_GPJ4_CAMDATA4 (0x02 << 8)
#define S3C2440_GPJ5_OUTP (0x01 << 10)
#define S3C2440_GPJ5_CAMDATA5 (0x02 << 10)
#define S3C2440_GPJ6_OUTP (0x01 << 12)
#define S3C2440_GPJ6_CAMDATA6 (0x02 << 12)
#define S3C2440_GPJ7_OUTP (0x01 << 14)
#define S3C2440_GPJ7_CAMDATA7 (0x02 << 14)
#define S3C2440_GPJ8_OUTP (0x01 << 16)
#define S3C2440_GPJ8_CAMPCLK (0x02 << 16)
#define S3C2440_GPJ9_OUTP (0x01 << 18)
#define S3C2440_GPJ9_CAMVSYNC (0x02 << 18)
#define S3C2440_GPJ10_OUTP (0x01 << 20)
#define S3C2440_GPJ10_CAMHREF (0x02 << 20)
#define S3C2440_GPJ11_OUTP (0x01 << 22)
#define S3C2440_GPJ11_CAMCLKOUT (0x02 << 22)
#define S3C2440_GPJ12_OUTP (0x01 << 24)
#define S3C2440_GPJ12_CAMRESET (0x02 << 24)
#endif /* __ASM_ARCH_REGS_GPIOJ_H */