Google Git
Sign in
nest-open-source / nest-guard / 1.0 / linux / 6754b876e4c89285b30ff59800d23e21ce2dbe3f / . / linux / drivers / media / video / cx23885 / cx23885-cards.c
blob: 8861309268b170d8f6effd11b17365e11ea846a5 [file] [log] [blame]
/*
* Driver for the Conexant CX23885 PCIe bridge
*
* Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
*
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <media/cx25840.h>
#include "cx23885.h"
#include "tuner-xc2028.h"
#include "netup-init.h"
#include "cx23888-ir.h"
static unsigned int enable_885_ir;
module_param(enable_885_ir, int, 0644);
MODULE_PARM_DESC(enable_885_ir,
"Enable integrated IR controller for supported\n"
"\t\t CX2388[57] boards that are wired for it:\n"
"\t\t\tHVR-1250 (reported safe)\n"
"\t\t\tTeVii S470 (reported unsafe)\n"
"\t\t This can cause an interrupt storm with some cards.\n"
"\t\t Default: 0 [Disabled]");
/* ------------------------------------------------------------------ */
/* board config info */
struct cx23885_board cx23885_boards[] = {
[CX23885_BOARD_UNKNOWN] = {
.name = "UNKNOWN/GENERIC",
/* Ensure safe default for unknown boards */
.clk_freq = 0,
.input = {{
.type = CX23885_VMUX_COMPOSITE1,
.vmux = 0,
}, {
.type = CX23885_VMUX_COMPOSITE2,
.vmux = 1,
}, {
.type = CX23885_VMUX_COMPOSITE3,
.vmux = 2,
}, {
.type = CX23885_VMUX_COMPOSITE4,
.vmux = 3,
} },
},
[CX23885_BOARD_HAUPPAUGE_HVR1800lp] = {
.name = "Hauppauge WinTV-HVR1800lp",
.portc = CX23885_MPEG_DVB,
.input = {{
.type = CX23885_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0xff00,
}, {
.type = CX23885_VMUX_DEBUG,
.vmux = 0,
.gpio0 = 0xff01,
}, {
.type = CX23885_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0xff02,
}, {
.type = CX23885_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0xff02,
} },
},
[CX23885_BOARD_HAUPPAUGE_HVR1800] = {
.name = "Hauppauge WinTV-HVR1800",
.porta = CX23885_ANALOG_VIDEO,
.portb = CX23885_MPEG_ENCODER,
.portc = CX23885_MPEG_DVB,
.tuner_type = TUNER_PHILIPS_TDA8290,
.tuner_addr = 0x42, /* 0x84 >> 1 */
.input = {{
.type = CX23885_VMUX_TELEVISION,
.vmux = CX25840_VIN7_CH3 |
CX25840_VIN5_CH2 |
CX25840_VIN2_CH1,
.gpio0 = 0,
}, {
.type = CX23885_VMUX_COMPOSITE1,
.vmux = CX25840_VIN7_CH3 |
CX25840_VIN4_CH2 |
CX25840_VIN6_CH1,
.gpio0 = 0,
}, {
.type = CX23885_VMUX_SVIDEO,
.vmux = CX25840_VIN7_CH3 |
CX25840_VIN4_CH2 |
CX25840_VIN8_CH1 |
CX25840_SVIDEO_ON,
.gpio0 = 0,
} },
},
[CX23885_BOARD_HAUPPAUGE_HVR1250] = {
.name = "Hauppauge WinTV-HVR1250",
.portc = CX23885_MPEG_DVB,
.input = {{
.type = CX23885_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0xff00,
}, {
.type = CX23885_VMUX_DEBUG,
.vmux = 0,
.gpio0 = 0xff01,
}, {
.type = CX23885_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0xff02,
}, {
.type = CX23885_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0xff02,
} },
},
[CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP] = {
.name = "DViCO FusionHDTV5 Express",
.portb = CX23885_MPEG_DVB,
},
[CX23885_BOARD_HAUPPAUGE_HVR1500Q] = {
.name = "Hauppauge WinTV-HVR1500Q",
.portc = CX23885_MPEG_DVB,
},
[CX23885_BOARD_HAUPPAUGE_HVR1500] = {
.name = "Hauppauge WinTV-HVR1500",
.portc = CX23885_MPEG_DVB,
},
[CX23885_BOARD_HAUPPAUGE_HVR1200] = {
.name = "Hauppauge WinTV-HVR1200",
.portc = CX23885_MPEG_DVB,
},
[CX23885_BOARD_HAUPPAUGE_HVR1700] = {
.name = "Hauppauge WinTV-HVR1700",
.portc = CX23885_MPEG_DVB,
},
[CX23885_BOARD_HAUPPAUGE_HVR1400] = {
.name = "Hauppauge WinTV-HVR1400",
.portc = CX23885_MPEG_DVB,
},
[CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP] = {
.name = "DViCO FusionHDTV7 Dual Express",
.portb = CX23885_MPEG_DVB,
.portc = CX23885_MPEG_DVB,
},
[CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP] = {
.name = "DViCO FusionHDTV DVB-T Dual Express",
.portb = CX23885_MPEG_DVB,
.portc = CX23885_MPEG_DVB,
},
[CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H] = {
.name = "Leadtek Winfast PxDVR3200 H",
.portc = CX23885_MPEG_DVB,
},
[CX23885_BOARD_COMPRO_VIDEOMATE_E650F] = {
.name = "Compro VideoMate E650F",
.portc = CX23885_MPEG_DVB,
},
[CX23885_BOARD_TBS_6920] = {
.name = "TurboSight TBS 6920",
.portb = CX23885_MPEG_DVB,
},
[CX23885_BOARD_TEVII_S470] = {
.name = "TeVii S470",
.portb = CX23885_MPEG_DVB,
},
[CX23885_BOARD_DVBWORLD_2005] = {
.name = "DVBWorld DVB-S2 2005",
.portb = CX23885_MPEG_DVB,
},
[CX23885_BOARD_NETUP_DUAL_DVBS2_CI] = {
.cimax = 1,
.name = "NetUP Dual DVB-S2 CI",
.portb = CX23885_MPEG_DVB,
.portc = CX23885_MPEG_DVB,
},
[CX23885_BOARD_HAUPPAUGE_HVR1270] = {
.name = "Hauppauge WinTV-HVR1270",
.portc = CX23885_MPEG_DVB,
},
[CX23885_BOARD_HAUPPAUGE_HVR1275] = {
.name = "Hauppauge WinTV-HVR1275",
.portc = CX23885_MPEG_DVB,
},
[CX23885_BOARD_HAUPPAUGE_HVR1255] = {
.name = "Hauppauge WinTV-HVR1255",
.portc = CX23885_MPEG_DVB,
},
[CX23885_BOARD_HAUPPAUGE_HVR1210] = {
.name = "Hauppauge WinTV-HVR1210",
.portc = CX23885_MPEG_DVB,
},
[CX23885_BOARD_MYGICA_X8506] = {
.name = "Mygica X8506 DMB-TH",
.tuner_type = TUNER_XC5000,
.tuner_addr = 0x61,
.porta = CX23885_ANALOG_VIDEO,
.portb = CX23885_MPEG_DVB,
.input = {
{
.type = CX23885_VMUX_TELEVISION,
.vmux = CX25840_COMPOSITE2,
},
{
.type = CX23885_VMUX_COMPOSITE1,
.vmux = CX25840_COMPOSITE8,
},
{
.type = CX23885_VMUX_SVIDEO,
.vmux = CX25840_SVIDEO_LUMA3 |
CX25840_SVIDEO_CHROMA4,
},
{
.type = CX23885_VMUX_COMPONENT,
.vmux = CX25840_COMPONENT_ON |
CX25840_VIN1_CH1 |
CX25840_VIN6_CH2 |
CX25840_VIN7_CH3,
},
},
},
[CX23885_BOARD_MAGICPRO_PROHDTVE2] = {
.name = "Magic-Pro ProHDTV Extreme 2",
.tuner_type = TUNER_XC5000,
.tuner_addr = 0x61,
.porta = CX23885_ANALOG_VIDEO,
.portb = CX23885_MPEG_DVB,
.input = {
{
.type = CX23885_VMUX_TELEVISION,
.vmux = CX25840_COMPOSITE2,
},
{
.type = CX23885_VMUX_COMPOSITE1,
.vmux = CX25840_COMPOSITE8,
},
{
.type = CX23885_VMUX_SVIDEO,
.vmux = CX25840_SVIDEO_LUMA3 |
CX25840_SVIDEO_CHROMA4,
},
{
.type = CX23885_VMUX_COMPONENT,
.vmux = CX25840_COMPONENT_ON |
CX25840_VIN1_CH1 |
CX25840_VIN6_CH2 |
CX25840_VIN7_CH3,
},
},
},
[CX23885_BOARD_HAUPPAUGE_HVR1850] = {
.name = "Hauppauge WinTV-HVR1850",
.portb = CX23885_MPEG_ENCODER,
.portc = CX23885_MPEG_DVB,
},
[CX23885_BOARD_COMPRO_VIDEOMATE_E800] = {
.name = "Compro VideoMate E800",
.portc = CX23885_MPEG_DVB,
},
[CX23885_BOARD_HAUPPAUGE_HVR1290] = {
.name = "Hauppauge WinTV-HVR1290",
.portc = CX23885_MPEG_DVB,
},
[CX23885_BOARD_MYGICA_X8558PRO] = {
.name = "Mygica X8558 PRO DMB-TH",
.portb = CX23885_MPEG_DVB,
.portc = CX23885_MPEG_DVB,
},
[CX23885_BOARD_LEADTEK_WINFAST_PXTV1200] = {
.name = "LEADTEK WinFast PxTV1200",
.porta = CX23885_ANALOG_VIDEO,
.tuner_type = TUNER_XC2028,
.tuner_addr = 0x61,
.input = {{
.type = CX23885_VMUX_TELEVISION,
.vmux = CX25840_VIN2_CH1 |
CX25840_VIN5_CH2 |
CX25840_NONE0_CH3,
}, {
.type = CX23885_VMUX_COMPOSITE1,
.vmux = CX25840_COMPOSITE1,
}, {
.type = CX23885_VMUX_SVIDEO,
.vmux = CX25840_SVIDEO_LUMA3 |
CX25840_SVIDEO_CHROMA4,
}, {
.type = CX23885_VMUX_COMPONENT,
.vmux = CX25840_VIN7_CH1 |
CX25840_VIN6_CH2 |
CX25840_VIN8_CH3 |
CX25840_COMPONENT_ON,
} },
},
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
/* ------------------------------------------------------------------ */
/* PCI subsystem IDs */
struct cx23885_subid cx23885_subids[] = {
{
.subvendor = 0x0070,
.subdevice = 0x3400,
.card = CX23885_BOARD_UNKNOWN,
}, {
.subvendor = 0x0070,
.subdevice = 0x7600,
.card = CX23885_BOARD_HAUPPAUGE_HVR1800lp,
}, {
.subvendor = 0x0070,
.subdevice = 0x7800,
.card = CX23885_BOARD_HAUPPAUGE_HVR1800,
}, {
.subvendor = 0x0070,
.subdevice = 0x7801,
.card = CX23885_BOARD_HAUPPAUGE_HVR1800,
}, {
.subvendor = 0x0070,
.subdevice = 0x7809,
.card = CX23885_BOARD_HAUPPAUGE_HVR1800,
}, {
.subvendor = 0x0070,
.subdevice = 0x7911,
.card = CX23885_BOARD_HAUPPAUGE_HVR1250,
}, {
.subvendor = 0x18ac,
.subdevice = 0xd500,
.card = CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP,
}, {
.subvendor = 0x0070,
.subdevice = 0x7790,
.card = CX23885_BOARD_HAUPPAUGE_HVR1500Q,
}, {
.subvendor = 0x0070,
.subdevice = 0x7797,
.card = CX23885_BOARD_HAUPPAUGE_HVR1500Q,
}, {
.subvendor = 0x0070,
.subdevice = 0x7710,
.card = CX23885_BOARD_HAUPPAUGE_HVR1500,
}, {
.subvendor = 0x0070,
.subdevice = 0x7717,
.card = CX23885_BOARD_HAUPPAUGE_HVR1500,
}, {
.subvendor = 0x0070,
.subdevice = 0x71d1,
.card = CX23885_BOARD_HAUPPAUGE_HVR1200,
}, {
.subvendor = 0x0070,
.subdevice = 0x71d3,
.card = CX23885_BOARD_HAUPPAUGE_HVR1200,
}, {
.subvendor = 0x0070,
.subdevice = 0x8101,
.card = CX23885_BOARD_HAUPPAUGE_HVR1700,
}, {
.subvendor = 0x0070,
.subdevice = 0x8010,
.card = CX23885_BOARD_HAUPPAUGE_HVR1400,
}, {
.subvendor = 0x18ac,
.subdevice = 0xd618,
.card = CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP,
}, {
.subvendor = 0x18ac,
.subdevice = 0xdb78,
.card = CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP,
}, {
.subvendor = 0x107d,
.subdevice = 0x6681,
.card = CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H,
}, {
.subvendor = 0x185b,
.subdevice = 0xe800,
.card = CX23885_BOARD_COMPRO_VIDEOMATE_E650F,
}, {
.subvendor = 0x6920,
.subdevice = 0x8888,
.card = CX23885_BOARD_TBS_6920,
}, {
.subvendor = 0xd470,
.subdevice = 0x9022,
.card = CX23885_BOARD_TEVII_S470,
}, {
.subvendor = 0x0001,
.subdevice = 0x2005,
.card = CX23885_BOARD_DVBWORLD_2005,
}, {
.subvendor = 0x1b55,
.subdevice = 0x2a2c,
.card = CX23885_BOARD_NETUP_DUAL_DVBS2_CI,
}, {
.subvendor = 0x0070,
.subdevice = 0x2211,
.card = CX23885_BOARD_HAUPPAUGE_HVR1270,
}, {
.subvendor = 0x0070,
.subdevice = 0x2215,
.card = CX23885_BOARD_HAUPPAUGE_HVR1275,
}, {
.subvendor = 0x0070,
.subdevice = 0x221d,
.card = CX23885_BOARD_HAUPPAUGE_HVR1275,
}, {
.subvendor = 0x0070,
.subdevice = 0x2251,
.card = CX23885_BOARD_HAUPPAUGE_HVR1255,
}, {
.subvendor = 0x0070,
.subdevice = 0x2259,
.card = CX23885_BOARD_HAUPPAUGE_HVR1255,
}, {
.subvendor = 0x0070,
.subdevice = 0x2291,
.card = CX23885_BOARD_HAUPPAUGE_HVR1210,
}, {
.subvendor = 0x0070,
.subdevice = 0x2295,
.card = CX23885_BOARD_HAUPPAUGE_HVR1210,
}, {
.subvendor = 0x0070,
.subdevice = 0x2299,
.card = CX23885_BOARD_HAUPPAUGE_HVR1210,
}, {
.subvendor = 0x0070,
.subdevice = 0x229d,
.card = CX23885_BOARD_HAUPPAUGE_HVR1210, /* HVR1215 */
}, {
.subvendor = 0x0070,
.subdevice = 0x22f0,
.card = CX23885_BOARD_HAUPPAUGE_HVR1210,
}, {
.subvendor = 0x0070,
.subdevice = 0x22f1,
.card = CX23885_BOARD_HAUPPAUGE_HVR1255,
}, {
.subvendor = 0x0070,
.subdevice = 0x22f2,
.card = CX23885_BOARD_HAUPPAUGE_HVR1275,
}, {
.subvendor = 0x0070,
.subdevice = 0x22f3,
.card = CX23885_BOARD_HAUPPAUGE_HVR1210, /* HVR1215 */
}, {
.subvendor = 0x0070,
.subdevice = 0x22f4,
.card = CX23885_BOARD_HAUPPAUGE_HVR1210,
}, {
.subvendor = 0x0070,
.subdevice = 0x22f5,
.card = CX23885_BOARD_HAUPPAUGE_HVR1210, /* HVR1215 */
}, {
.subvendor = 0x14f1,
.subdevice = 0x8651,
.card = CX23885_BOARD_MYGICA_X8506,
}, {
.subvendor = 0x14f1,
.subdevice = 0x8657,
.card = CX23885_BOARD_MAGICPRO_PROHDTVE2,
}, {
.subvendor = 0x0070,
.subdevice = 0x8541,
.card = CX23885_BOARD_HAUPPAUGE_HVR1850,
}, {
.subvendor = 0x1858,
.subdevice = 0xe800,
.card = CX23885_BOARD_COMPRO_VIDEOMATE_E800,
}, {
.subvendor = 0x0070,
.subdevice = 0x8551,
.card = CX23885_BOARD_HAUPPAUGE_HVR1290,
}, {
.subvendor = 0x14f1,
.subdevice = 0x8578,
.card = CX23885_BOARD_MYGICA_X8558PRO,
}, {
.subvendor = 0x107d,
.subdevice = 0x6f22,
.card = CX23885_BOARD_LEADTEK_WINFAST_PXTV1200,
},
};
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
void cx23885_card_list(struct cx23885_dev *dev)
{
int i;
if (0 == dev->pci->subsystem_vendor &&
0 == dev->pci->subsystem_device) {
printk(KERN_INFO
"%s: Board has no valid PCIe Subsystem ID and can't\n"
"%s: be autodetected. Pass card=<n> insmod option\n"
"%s: to workaround that. Redirect complaints to the\n"
"%s: vendor of the TV card. Best regards,\n"
"%s: -- tux\n",
dev->name, dev->name, dev->name, dev->name, dev->name);
} else {
printk(KERN_INFO
"%s: Your board isn't known (yet) to the driver.\n"
"%s: Try to pick one of the existing card configs via\n"
"%s: card=<n> insmod option. Updating to the latest\n"
"%s: version might help as well.\n",
dev->name, dev->name, dev->name, dev->name);
}
printk(KERN_INFO "%s: Here is a list of valid choices for the card=<n> insmod option:\n",
dev->name);
for (i = 0; i < cx23885_bcount; i++)
printk(KERN_INFO "%s: card=%d -> %s\n",
dev->name, i, cx23885_boards[i].name);
}
static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
{
struct tveeprom tv;
tveeprom_hauppauge_analog(&dev->i2c_bus[0].i2c_client, &tv,
eeprom_data);
/* Make sure we support the board model */
switch (tv.model) {
case 22001:
/* WinTV-HVR1270 (PCIe, Retail, half height)
* ATSC/QAM and basic analog, IR Blast */
case 22009:
/* WinTV-HVR1210 (PCIe, Retail, half height)
* DVB-T and basic analog, IR Blast */
case 22011:
/* WinTV-HVR1270 (PCIe, Retail, half height)
* ATSC/QAM and basic analog, IR Recv */
case 22019:
/* WinTV-HVR1210 (PCIe, Retail, half height)
* DVB-T and basic analog, IR Recv */
case 22021:
/* WinTV-HVR1275 (PCIe, Retail, half height)
* ATSC/QAM and basic analog, IR Recv */
case 22029:
/* WinTV-HVR1210 (PCIe, Retail, half height)
* DVB-T and basic analog, IR Recv */
case 22101:
/* WinTV-HVR1270 (PCIe, Retail, full height)
* ATSC/QAM and basic analog, IR Blast */
case 22109:
/* WinTV-HVR1210 (PCIe, Retail, full height)
* DVB-T and basic analog, IR Blast */
case 22111:
/* WinTV-HVR1270 (PCIe, Retail, full height)
* ATSC/QAM and basic analog, IR Recv */
case 22119:
/* WinTV-HVR1210 (PCIe, Retail, full height)
* DVB-T and basic analog, IR Recv */
case 22121:
/* WinTV-HVR1275 (PCIe, Retail, full height)
* ATSC/QAM and basic analog, IR Recv */
case 22129:
/* WinTV-HVR1210 (PCIe, Retail, full height)
* DVB-T and basic analog, IR Recv */
case 71009:
/* WinTV-HVR1200 (PCIe, Retail, full height)
* DVB-T and basic analog */
case 71359:
/* WinTV-HVR1200 (PCIe, OEM, half height)
* DVB-T and basic analog */
case 71439:
/* WinTV-HVR1200 (PCIe, OEM, half height)
* DVB-T and basic analog */
case 71449:
/* WinTV-HVR1200 (PCIe, OEM, full height)
* DVB-T and basic analog */
case 71939:
/* WinTV-HVR1200 (PCIe, OEM, half height)
* DVB-T and basic analog */
case 71949:
/* WinTV-HVR1200 (PCIe, OEM, full height)
* DVB-T and basic analog */
case 71959:
/* WinTV-HVR1200 (PCIe, OEM, full height)
* DVB-T and basic analog */
case 71979:
/* WinTV-HVR1200 (PCIe, OEM, half height)
* DVB-T and basic analog */
case 71999:
/* WinTV-HVR1200 (PCIe, OEM, full height)
* DVB-T and basic analog */
case 76601:
/* WinTV-HVR1800lp (PCIe, Retail, No IR, Dual
channel ATSC and MPEG2 HW Encoder */
case 77001:
/* WinTV-HVR1500 (Express Card, OEM, No IR, ATSC
and Basic analog */
case 77011:
/* WinTV-HVR1500 (Express Card, Retail, No IR, ATSC
and Basic analog */
case 77041:
/* WinTV-HVR1500Q (Express Card, OEM, No IR, ATSC/QAM
and Basic analog */
case 77051:
/* WinTV-HVR1500Q (Express Card, Retail, No IR, ATSC/QAM
and Basic analog */
case 78011:
/* WinTV-HVR1800 (PCIe, Retail, 3.5mm in, IR, No FM,
Dual channel ATSC and MPEG2 HW Encoder */
case 78501:
/* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM,
Dual channel ATSC and MPEG2 HW Encoder */
case 78521:
/* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM,
Dual channel ATSC and MPEG2 HW Encoder */
case 78531:
/* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, No FM,
Dual channel ATSC and MPEG2 HW Encoder */
case 78631:
/* WinTV-HVR1800 (PCIe, OEM, No IR, No FM,
Dual channel ATSC and MPEG2 HW Encoder */
case 79001:
/* WinTV-HVR1250 (PCIe, Retail, IR, full height,
ATSC and Basic analog */
case 79101:
/* WinTV-HVR1250 (PCIe, Retail, IR, half height,
ATSC and Basic analog */
case 79501:
/* WinTV-HVR1250 (PCIe, No IR, half height,
ATSC [at least] and Basic analog) */
case 79561:
/* WinTV-HVR1250 (PCIe, OEM, No IR, half height,
ATSC and Basic analog */
case 79571:
/* WinTV-HVR1250 (PCIe, OEM, No IR, full height,
ATSC and Basic analog */
case 79671:
/* WinTV-HVR1250 (PCIe, OEM, No IR, half height,
ATSC and Basic analog */
case 80019:
/* WinTV-HVR1400 (Express Card, Retail, IR,
* DVB-T and Basic analog */
case 81509:
/* WinTV-HVR1700 (PCIe, OEM, No IR, half height)
* DVB-T and MPEG2 HW Encoder */
case 81519:
/* WinTV-HVR1700 (PCIe, OEM, No IR, full height)
* DVB-T and MPEG2 HW Encoder */
break;
case 85021:
/* WinTV-HVR1850 (PCIe, Retail, 3.5mm in, IR, FM,
Dual channel ATSC and MPEG2 HW Encoder */
break;
case 85721:
/* WinTV-HVR1290 (PCIe, OEM, RCA in, IR,
Dual channel ATSC and Basic analog */
break;
default:
printk(KERN_WARNING "%s: warning: "
"unknown hauppauge model #%d\n",
dev->name, tv.model);
break;
}
printk(KERN_INFO "%s: hauppauge eeprom: model=%d\n",
dev->name, tv.model);
}
int cx23885_tuner_callback(void *priv, int component, int command, int arg)
{
struct cx23885_tsport *port = priv;
struct cx23885_dev *dev = port->dev;
u32 bitmask = 0;
if (command == XC2028_RESET_CLK)
return 0;
if (command != 0) {
printk(KERN_ERR "%s(): Unknown command 0x%x.\n",
__func__, command);
return -EINVAL;
}
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1400:
case CX23885_BOARD_HAUPPAUGE_HVR1500:
case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
/* Tuner Reset Command */
bitmask = 0x04;
break;
case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
/* Two identical tuners on two different i2c buses,
* we need to reset the correct gpio. */
if (port->nr == 1)
bitmask = 0x01;
else if (port->nr == 2)
bitmask = 0x04;
break;
}
if (bitmask) {
/* Drive the tuner into reset and back out */
cx_clear(GP0_IO, bitmask);
mdelay(200);
cx_set(GP0_IO, bitmask);
}
return 0;
}
void cx23885_gpio_setup(struct cx23885_dev *dev)
{
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1250:
/* GPIO-0 cx24227 demodulator reset */
cx_set(GP0_IO, 0x00010001); /* Bring the part out of reset */
break;
case CX23885_BOARD_HAUPPAUGE_HVR1500:
/* GPIO-0 cx24227 demodulator */
/* GPIO-2 xc3028 tuner */
/* Put the parts into reset */
cx_set(GP0_IO, 0x00050000);
cx_clear(GP0_IO, 0x00000005);
msleep(5);
/* Bring the parts out of reset */
cx_set(GP0_IO, 0x00050005);
break;
case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
/* GPIO-0 cx24227 demodulator reset */
/* GPIO-2 xc5000 tuner reset */
cx_set(GP0_IO, 0x00050005); /* Bring the part out of reset */
break;
case CX23885_BOARD_HAUPPAUGE_HVR1800:
/* GPIO-0 656_CLK */
/* GPIO-1 656_D0 */
/* GPIO-2 8295A Reset */
/* GPIO-3-10 cx23417 data0-7 */
/* GPIO-11-14 cx23417 addr0-3 */
/* GPIO-15-18 cx23417 READY, CS, RD, WR */
/* GPIO-19 IR_RX */
/* CX23417 GPIO's */
/* EIO15 Zilog Reset */
/* EIO14 S5H1409/CX24227 Reset */
mc417_gpio_enable(dev, GPIO_15 | GPIO_14, 1);
/* Put the demod into reset and protect the eeprom */
mc417_gpio_clear(dev, GPIO_15 | GPIO_14);
mdelay(100);
/* Bring the demod and blaster out of reset */
mc417_gpio_set(dev, GPIO_15 | GPIO_14);
mdelay(100);
/* Force the TDA8295A into reset and back */
cx23885_gpio_enable(dev, GPIO_2, 1);
cx23885_gpio_set(dev, GPIO_2);
mdelay(20);
cx23885_gpio_clear(dev, GPIO_2);
mdelay(20);
cx23885_gpio_set(dev, GPIO_2);
mdelay(20);
break;
case CX23885_BOARD_HAUPPAUGE_HVR1200:
/* GPIO-0 tda10048 demodulator reset */
/* GPIO-2 tda18271 tuner reset */
/* Put the parts into reset and back */
cx_set(GP0_IO, 0x00050000);
mdelay(20);
cx_clear(GP0_IO, 0x00000005);
mdelay(20);
cx_set(GP0_IO, 0x00050005);
break;
case CX23885_BOARD_HAUPPAUGE_HVR1700:
/* GPIO-0 TDA10048 demodulator reset */
/* GPIO-2 TDA8295A Reset */
/* GPIO-3-10 cx23417 data0-7 */
/* GPIO-11-14 cx23417 addr0-3 */
/* GPIO-15-18 cx23417 READY, CS, RD, WR */
/* The following GPIO's are on the interna AVCore (cx25840) */
/* GPIO-19 IR_RX */
/* GPIO-20 IR_TX 416/DVBT Select */
/* GPIO-21 IIS DAT */
/* GPIO-22 IIS WCLK */
/* GPIO-23 IIS BCLK */
/* Put the parts into reset and back */
cx_set(GP0_IO, 0x00050000);
mdelay(20);
cx_clear(GP0_IO, 0x00000005);
mdelay(20);
cx_set(GP0_IO, 0x00050005);
break;
case CX23885_BOARD_HAUPPAUGE_HVR1400:
/* GPIO-0 Dibcom7000p demodulator reset */
/* GPIO-2 xc3028L tuner reset */
/* GPIO-13 LED */
/* Put the parts into reset and back */
cx_set(GP0_IO, 0x00050000);
mdelay(20);
cx_clear(GP0_IO, 0x00000005);
mdelay(20);
cx_set(GP0_IO, 0x00050005);
break;
case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
/* GPIO-0 xc5000 tuner reset i2c bus 0 */
/* GPIO-1 s5h1409 demod reset i2c bus 0 */
/* GPIO-2 xc5000 tuner reset i2c bus 1 */
/* GPIO-3 s5h1409 demod reset i2c bus 0 */
/* Put the parts into reset and back */
cx_set(GP0_IO, 0x000f0000);
mdelay(20);
cx_clear(GP0_IO, 0x0000000f);
mdelay(20);
cx_set(GP0_IO, 0x000f000f);
break;
case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
/* GPIO-0 portb xc3028 reset */
/* GPIO-1 portb zl10353 reset */
/* GPIO-2 portc xc3028 reset */
/* GPIO-3 portc zl10353 reset */
/* Put the parts into reset and back */
cx_set(GP0_IO, 0x000f0000);
mdelay(20);
cx_clear(GP0_IO, 0x0000000f);
mdelay(20);
cx_set(GP0_IO, 0x000f000f);
break;
case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
/* GPIO-2 xc3028 tuner reset */
/* The following GPIO's are on the internal AVCore (cx25840) */
/* GPIO-? zl10353 demod reset */
/* Put the parts into reset and back */
cx_set(GP0_IO, 0x00040000);
mdelay(20);
cx_clear(GP0_IO, 0x00000004);
mdelay(20);
cx_set(GP0_IO, 0x00040004);
break;
case CX23885_BOARD_TBS_6920:
cx_write(MC417_CTL, 0x00000036);
cx_write(MC417_OEN, 0x00001000);
cx_set(MC417_RWD, 0x00000002);
mdelay(200);
cx_clear(MC417_RWD, 0x00000800);
mdelay(200);
cx_set(MC417_RWD, 0x00000800);
mdelay(200);
break;
case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
/* GPIO-0 INTA from CiMax1
GPIO-1 INTB from CiMax2
GPIO-2 reset chips
GPIO-3 to GPIO-10 data/addr for CA
GPIO-11 ~CS0 to CiMax1
GPIO-12 ~CS1 to CiMax2
GPIO-13 ADL0 load LSB addr
GPIO-14 ADL1 load MSB addr
GPIO-15 ~RDY from CiMax
GPIO-17 ~RD to CiMax
GPIO-18 ~WR to CiMax
*/
cx_set(GP0_IO, 0x00040000); /* GPIO as out */
/* GPIO1 and GPIO2 as INTA and INTB from CiMaxes, reset low */
cx_clear(GP0_IO, 0x00030004);
mdelay(100);/* reset delay */
cx_set(GP0_IO, 0x00040004); /* GPIO as out, reset high */
cx_write(MC417_CTL, 0x00000037);/* enable GPIO3-18 pins */
/* GPIO-15 IN as ~ACK, rest as OUT */
cx_write(MC417_OEN, 0x00001000);
/* ~RD, ~WR high; ADL0, ADL1 low; ~CS0, ~CS1 high */
cx_write(MC417_RWD, 0x0000c300);
/* enable irq */
cx_write(GPIO_ISM, 0x00000000);/* INTERRUPTS active low*/
break;
case CX23885_BOARD_HAUPPAUGE_HVR1270:
case CX23885_BOARD_HAUPPAUGE_HVR1275:
case CX23885_BOARD_HAUPPAUGE_HVR1255:
case CX23885_BOARD_HAUPPAUGE_HVR1210:
/* GPIO-5 RF Control: 0 = RF1 Terrestrial, 1 = RF2 Cable */
/* GPIO-6 I2C Gate which can isolate the demod from the bus */
/* GPIO-9 Demod reset */
/* Put the parts into reset and back */
cx23885_gpio_enable(dev, GPIO_9 | GPIO_6 | GPIO_5, 1);
cx23885_gpio_set(dev, GPIO_9 | GPIO_6 | GPIO_5);
cx23885_gpio_clear(dev, GPIO_9);
mdelay(20);
cx23885_gpio_set(dev, GPIO_9);
break;
case CX23885_BOARD_MYGICA_X8506:
case CX23885_BOARD_MAGICPRO_PROHDTVE2:
/* GPIO-0 (0)Analog / (1)Digital TV */
/* GPIO-1 reset XC5000 */
/* GPIO-2 reset LGS8GL5 / LGS8G75 */
cx23885_gpio_enable(dev, GPIO_0 | GPIO_1 | GPIO_2, 1);
cx23885_gpio_clear(dev, GPIO_1 | GPIO_2);
mdelay(100);
cx23885_gpio_set(dev, GPIO_0 | GPIO_1 | GPIO_2);
mdelay(100);
break;
case CX23885_BOARD_MYGICA_X8558PRO:
/* GPIO-0 reset first ATBM8830 */
/* GPIO-1 reset second ATBM8830 */
cx23885_gpio_enable(dev, GPIO_0 | GPIO_1, 1);
cx23885_gpio_clear(dev, GPIO_0 | GPIO_1);
mdelay(100);
cx23885_gpio_set(dev, GPIO_0 | GPIO_1);
mdelay(100);
break;
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
/* GPIO-0 656_CLK */
/* GPIO-1 656_D0 */
/* GPIO-2 Wake# */
/* GPIO-3-10 cx23417 data0-7 */
/* GPIO-11-14 cx23417 addr0-3 */
/* GPIO-15-18 cx23417 READY, CS, RD, WR */
/* GPIO-19 IR_RX */
/* GPIO-20 C_IR_TX */
/* GPIO-21 I2S DAT */
/* GPIO-22 I2S WCLK */
/* GPIO-23 I2S BCLK */
/* ALT GPIO: EXP GPIO LATCH */
/* CX23417 GPIO's */
/* GPIO-14 S5H1411/CX24228 Reset */
/* GPIO-13 EEPROM write protect */
mc417_gpio_enable(dev, GPIO_14 | GPIO_13, 1);
/* Put the demod into reset and protect the eeprom */
mc417_gpio_clear(dev, GPIO_14 | GPIO_13);
mdelay(100);
/* Bring the demod out of reset */
mc417_gpio_set(dev, GPIO_14);
mdelay(100);
/* CX24228 GPIO */
/* Connected to IF / Mux */
break;
}
}
int cx23885_ir_init(struct cx23885_dev *dev)
{
static struct v4l2_subdev_io_pin_config ir_rxtx_pin_cfg[] = {
{
.flags = V4L2_SUBDEV_IO_PIN_INPUT,
.pin = CX23885_PIN_IR_RX_GPIO19,
.function = CX23885_PAD_IR_RX,
.value = 0,
.strength = CX25840_PIN_DRIVE_MEDIUM,
}, {
.flags = V4L2_SUBDEV_IO_PIN_OUTPUT,
.pin = CX23885_PIN_IR_TX_GPIO20,
.function = CX23885_PAD_IR_TX,
.value = 0,
.strength = CX25840_PIN_DRIVE_MEDIUM,
}
};
const size_t ir_rxtx_pin_cfg_count = ARRAY_SIZE(ir_rxtx_pin_cfg);
static struct v4l2_subdev_io_pin_config ir_rx_pin_cfg[] = {
{
.flags = V4L2_SUBDEV_IO_PIN_INPUT,
.pin = CX23885_PIN_IR_RX_GPIO19,
.function = CX23885_PAD_IR_RX,
.value = 0,
.strength = CX25840_PIN_DRIVE_MEDIUM,
}
};
const size_t ir_rx_pin_cfg_count = ARRAY_SIZE(ir_rx_pin_cfg);
struct v4l2_subdev_ir_parameters params;
int ret = 0;
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1500:
case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
case CX23885_BOARD_HAUPPAUGE_HVR1800:
case CX23885_BOARD_HAUPPAUGE_HVR1200:
case CX23885_BOARD_HAUPPAUGE_HVR1400:
case CX23885_BOARD_HAUPPAUGE_HVR1270:
case CX23885_BOARD_HAUPPAUGE_HVR1275:
case CX23885_BOARD_HAUPPAUGE_HVR1255:
case CX23885_BOARD_HAUPPAUGE_HVR1210:
/* FIXME: Implement me */
break;
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
ret = cx23888_ir_probe(dev);
if (ret)
break;
dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_888_IR);
v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
ir_rxtx_pin_cfg_count, ir_rxtx_pin_cfg);
/*
* For these boards we need to invert the Tx output via the
* IR controller to have the LED off while idle
*/
v4l2_subdev_call(dev->sd_ir, ir, tx_g_parameters, &params);
params.enable = false;
params.shutdown = false;
params.invert_level = true;
v4l2_subdev_call(dev->sd_ir, ir, tx_s_parameters, &params);
params.shutdown = true;
v4l2_subdev_call(dev->sd_ir, ir, tx_s_parameters, &params);
break;
case CX23885_BOARD_TEVII_S470:
if (!enable_885_ir)
break;
dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE);
if (dev->sd_ir == NULL) {
ret = -ENODEV;
break;
}
v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
ir_rx_pin_cfg_count, ir_rx_pin_cfg);
break;
case CX23885_BOARD_HAUPPAUGE_HVR1250:
if (!enable_885_ir)
break;
dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE);
if (dev->sd_ir == NULL) {
ret = -ENODEV;
break;
}
v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
ir_rxtx_pin_cfg_count, ir_rxtx_pin_cfg);
break;
case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
request_module("ir-kbd-i2c");
break;
}
return ret;
}
void cx23885_ir_fini(struct cx23885_dev *dev)
{
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
cx23885_irq_remove(dev, PCI_MSK_IR);
cx23888_ir_remove(dev);
dev->sd_ir = NULL;
break;
case CX23885_BOARD_TEVII_S470:
case CX23885_BOARD_HAUPPAUGE_HVR1250:
cx23885_irq_remove(dev, PCI_MSK_AV_CORE);
/* sd_ir is a duplicate pointer to the AV Core, just clear it */
dev->sd_ir = NULL;
break;
}
}
void cx23885_ir_pci_int_enable(struct cx23885_dev *dev)
{
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
if (dev->sd_ir)
cx23885_irq_add_enable(dev, PCI_MSK_IR);
break;
case CX23885_BOARD_TEVII_S470:
case CX23885_BOARD_HAUPPAUGE_HVR1250:
if (dev->sd_ir)
cx23885_irq_add_enable(dev, PCI_MSK_AV_CORE);
break;
}
}
void cx23885_card_setup(struct cx23885_dev *dev)
{
struct cx23885_tsport *ts1 = &dev->ts1;
struct cx23885_tsport *ts2 = &dev->ts2;
static u8 eeprom[256];
if (dev->i2c_bus[0].i2c_rc == 0) {
dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;
tveeprom_read(&dev->i2c_bus[0].i2c_client,
eeprom, sizeof(eeprom));
}
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1250:
if (dev->i2c_bus[0].i2c_rc == 0) {
if (eeprom[0x80] != 0x84)
hauppauge_eeprom(dev, eeprom+0xc0);
else
hauppauge_eeprom(dev, eeprom+0x80);
}
break;
case CX23885_BOARD_HAUPPAUGE_HVR1500:
case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
case CX23885_BOARD_HAUPPAUGE_HVR1400:
if (dev->i2c_bus[0].i2c_rc == 0)
hauppauge_eeprom(dev, eeprom+0x80);
break;
case CX23885_BOARD_HAUPPAUGE_HVR1800:
case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
case CX23885_BOARD_HAUPPAUGE_HVR1200:
case CX23885_BOARD_HAUPPAUGE_HVR1700:
case CX23885_BOARD_HAUPPAUGE_HVR1270:
case CX23885_BOARD_HAUPPAUGE_HVR1275:
case CX23885_BOARD_HAUPPAUGE_HVR1255:
case CX23885_BOARD_HAUPPAUGE_HVR1210:
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
if (dev->i2c_bus[0].i2c_rc == 0)
hauppauge_eeprom(dev, eeprom+0xc0);
break;
}
switch (dev->board) {
case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
/* break omitted intentionally */
case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP:
ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
break;
case CX23885_BOARD_HAUPPAUGE_HVR1800:
/* Defaults for VID B - Analog encoder */
/* DREQ_POL, SMODE, PUNC_CLK, MCLK_POL Serial bus + punc clk */
ts1->gen_ctrl_val = 0x10e;
ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
/* APB_TSVALERR_POL (active low)*/
ts1->vld_misc_val = 0x2000;
ts1->hw_sop_ctrl_val = (0x47 << 16 | 188 << 4 | 0xc);
/* Defaults for VID C */
ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
break;
case CX23885_BOARD_TBS_6920:
ts1->gen_ctrl_val = 0x4; /* Parallel */
ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
break;
case CX23885_BOARD_TEVII_S470:
case CX23885_BOARD_DVBWORLD_2005:
ts1->gen_ctrl_val = 0x5; /* Parallel */
ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
break;
case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
break;
case CX23885_BOARD_MYGICA_X8506:
case CX23885_BOARD_MAGICPRO_PROHDTVE2:
ts1->gen_ctrl_val = 0x5; /* Parallel */
ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
break;
case CX23885_BOARD_MYGICA_X8558PRO:
ts1->gen_ctrl_val = 0x5; /* Parallel */
ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
break;
case CX23885_BOARD_HAUPPAUGE_HVR1250:
case CX23885_BOARD_HAUPPAUGE_HVR1500:
case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
case CX23885_BOARD_HAUPPAUGE_HVR1200:
case CX23885_BOARD_HAUPPAUGE_HVR1700:
case CX23885_BOARD_HAUPPAUGE_HVR1400:
case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
case CX23885_BOARD_HAUPPAUGE_HVR1270:
case CX23885_BOARD_HAUPPAUGE_HVR1275:
case CX23885_BOARD_HAUPPAUGE_HVR1255:
case CX23885_BOARD_HAUPPAUGE_HVR1210:
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
default:
ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
}
/* Certain boards support analog, or require the avcore to be
* loaded, ensure this happens.
*/
switch (dev->board) {
case CX23885_BOARD_TEVII_S470:
case CX23885_BOARD_HAUPPAUGE_HVR1250:
/* Currently only enabled for the integrated IR controller */
if (!enable_885_ir)
break;
case CX23885_BOARD_HAUPPAUGE_HVR1800:
case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
case CX23885_BOARD_HAUPPAUGE_HVR1700:
case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_MYGICA_X8506:
case CX23885_BOARD_MAGICPRO_PROHDTVE2:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[2].i2c_adap,
"cx25840", 0x88 >> 1, NULL);
if (dev->sd_cx25840) {
dev->sd_cx25840->grp_id = CX23885_HW_AV_CORE;
v4l2_subdev_call(dev->sd_cx25840, core, load_fw);
}
break;
}
/* AUX-PLL 27MHz CLK */
switch (dev->board) {
case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
netup_initialize(dev);
break;
}
}
/* ------------------------------------------------------------------ */