blob: 5eac1351a02133e692074895bdb625aa28e28212 [file] [log] [blame]
/**
* This file function prototypes, data structure
* and definitions for all the host/station commands
*/
#ifndef _LBS_HOST_H_
#define _LBS_HOST_H_
#include "types.h"
#include "defs.h"
#define DEFAULT_AD_HOC_CHANNEL 6
#define CMD_OPTION_WAITFORRSP 0x0002
/** Host command IDs */
/* Return command are almost always the same as the host command, but with
* bit 15 set high. There are a few exceptions, though...
*/
#define CMD_RET(cmd) (0x8000 | cmd)
/* Return command convention exceptions: */
#define CMD_RET_802_11_ASSOCIATE 0x8012
/* Command codes */
#define CMD_GET_HW_SPEC 0x0003
#define CMD_EEPROM_UPDATE 0x0004
#define CMD_802_11_RESET 0x0005
#define CMD_802_11_SCAN 0x0006
#define CMD_802_11_GET_LOG 0x000b
#define CMD_MAC_MULTICAST_ADR 0x0010
#define CMD_802_11_AUTHENTICATE 0x0011
#define CMD_802_11_EEPROM_ACCESS 0x0059
#define CMD_802_11_ASSOCIATE 0x0050
#define CMD_802_11_SET_WEP 0x0013
#define CMD_802_11_GET_STAT 0x0014
#define CMD_802_3_GET_STAT 0x0015
#define CMD_802_11_SNMP_MIB 0x0016
#define CMD_MAC_REG_MAP 0x0017
#define CMD_BBP_REG_MAP 0x0018
#define CMD_MAC_REG_ACCESS 0x0019
#define CMD_BBP_REG_ACCESS 0x001a
#define CMD_RF_REG_ACCESS 0x001b
#define CMD_802_11_RADIO_CONTROL 0x001c
#define CMD_802_11_RF_CHANNEL 0x001d
#define CMD_802_11_RF_TX_POWER 0x001e
#define CMD_802_11_RSSI 0x001f
#define CMD_802_11_RF_ANTENNA 0x0020
#define CMD_802_11_PS_MODE 0x0021
#define CMD_802_11_DATA_RATE 0x0022
#define CMD_RF_REG_MAP 0x0023
#define CMD_802_11_DEAUTHENTICATE 0x0024
#define CMD_802_11_REASSOCIATE 0x0025
#define CMD_MAC_CONTROL 0x0028
#define CMD_802_11_AD_HOC_START 0x002b
#define CMD_802_11_AD_HOC_JOIN 0x002c
#define CMD_802_11_QUERY_TKIP_REPLY_CNTRS 0x002e
#define CMD_802_11_ENABLE_RSN 0x002f
#define CMD_802_11_SET_AFC 0x003c
#define CMD_802_11_GET_AFC 0x003d
#define CMD_802_11_DEEP_SLEEP 0x003e
#define CMD_802_11_AD_HOC_STOP 0x0040
#define CMD_802_11_HOST_SLEEP_CFG 0x0043
#define CMD_802_11_WAKEUP_CONFIRM 0x0044
#define CMD_802_11_HOST_SLEEP_ACTIVATE 0x0045
#define CMD_802_11_BEACON_STOP 0x0049
#define CMD_802_11_MAC_ADDRESS 0x004d
#define CMD_802_11_LED_GPIO_CTRL 0x004e
#define CMD_802_11_EEPROM_ACCESS 0x0059
#define CMD_802_11_BAND_CONFIG 0x0058
#define CMD_GSPI_BUS_CONFIG 0x005a
#define CMD_802_11D_DOMAIN_INFO 0x005b
#define CMD_802_11_KEY_MATERIAL 0x005e
#define CMD_802_11_SLEEP_PARAMS 0x0066
#define CMD_802_11_INACTIVITY_TIMEOUT 0x0067
#define CMD_802_11_SLEEP_PERIOD 0x0068
#define CMD_802_11_TPC_CFG 0x0072
#define CMD_802_11_PA_CFG 0x0073
#define CMD_802_11_FW_WAKE_METHOD 0x0074
#define CMD_802_11_SUBSCRIBE_EVENT 0x0075
#define CMD_802_11_RATE_ADAPT_RATESET 0x0076
#define CMD_802_11_TX_RATE_QUERY 0x007f
#define CMD_GET_TSF 0x0080
#define CMD_BT_ACCESS 0x0087
#define CMD_FWT_ACCESS 0x0095
#define CMD_802_11_MONITOR_MODE 0x0098
#define CMD_MESH_ACCESS 0x009b
#define CMD_MESH_CONFIG_OLD 0x00a3
#define CMD_MESH_CONFIG 0x00ac
#define CMD_SET_BOOT2_VER 0x00a5
#define CMD_FUNC_INIT 0x00a9
#define CMD_FUNC_SHUTDOWN 0x00aa
#define CMD_802_11_BEACON_CTRL 0x00b0
/* For the IEEE Power Save */
#define PS_MODE_ACTION_ENTER_PS 0x0030
#define PS_MODE_ACTION_EXIT_PS 0x0031
#define PS_MODE_ACTION_SLEEP_CONFIRMED 0x0034
#define CMD_ENABLE_RSN 0x0001
#define CMD_DISABLE_RSN 0x0000
#define CMD_ACT_GET 0x0000
#define CMD_ACT_SET 0x0001
/* Define action or option for CMD_802_11_SET_WEP */
#define CMD_ACT_ADD 0x0002
#define CMD_ACT_REMOVE 0x0004
#define CMD_TYPE_WEP_40_BIT 0x01
#define CMD_TYPE_WEP_104_BIT 0x02
#define CMD_NUM_OF_WEP_KEYS 4
#define CMD_WEP_KEY_INDEX_MASK 0x3fff
/* Define action or option for CMD_802_11_SCAN */
#define CMD_BSS_TYPE_BSS 0x0001
#define CMD_BSS_TYPE_IBSS 0x0002
#define CMD_BSS_TYPE_ANY 0x0003
/* Define action or option for CMD_802_11_SCAN */
#define CMD_SCAN_TYPE_ACTIVE 0x0000
#define CMD_SCAN_TYPE_PASSIVE 0x0001
#define CMD_SCAN_RADIO_TYPE_BG 0
#define CMD_SCAN_PROBE_DELAY_TIME 0
/* Define action or option for CMD_MAC_CONTROL */
#define CMD_ACT_MAC_RX_ON 0x0001
#define CMD_ACT_MAC_TX_ON 0x0002
#define CMD_ACT_MAC_LOOPBACK_ON 0x0004
#define CMD_ACT_MAC_WEP_ENABLE 0x0008
#define CMD_ACT_MAC_INT_ENABLE 0x0010
#define CMD_ACT_MAC_MULTICAST_ENABLE 0x0020
#define CMD_ACT_MAC_BROADCAST_ENABLE 0x0040
#define CMD_ACT_MAC_PROMISCUOUS_ENABLE 0x0080
#define CMD_ACT_MAC_ALL_MULTICAST_ENABLE 0x0100
#define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE 0x0400
/* Event flags for CMD_802_11_SUBSCRIBE_EVENT */
#define CMD_SUBSCRIBE_RSSI_LOW 0x0001
#define CMD_SUBSCRIBE_SNR_LOW 0x0002
#define CMD_SUBSCRIBE_FAILCOUNT 0x0004
#define CMD_SUBSCRIBE_BCNMISS 0x0008
#define CMD_SUBSCRIBE_RSSI_HIGH 0x0010
#define CMD_SUBSCRIBE_SNR_HIGH 0x0020
#define RADIO_PREAMBLE_LONG 0x00
#define RADIO_PREAMBLE_SHORT 0x02
#define RADIO_PREAMBLE_AUTO 0x04
/* Define action or option for CMD_802_11_RF_CHANNEL */
#define CMD_OPT_802_11_RF_CHANNEL_GET 0x00
#define CMD_OPT_802_11_RF_CHANNEL_SET 0x01
/* Define action or option for CMD_802_11_DATA_RATE */
#define CMD_ACT_SET_TX_AUTO 0x0000
#define CMD_ACT_SET_TX_FIX_RATE 0x0001
#define CMD_ACT_GET_TX_RATE 0x0002
/* Options for CMD_802_11_FW_WAKE_METHOD */
#define CMD_WAKE_METHOD_UNCHANGED 0x0000
#define CMD_WAKE_METHOD_COMMAND_INT 0x0001
#define CMD_WAKE_METHOD_GPIO 0x0002
/* Object IDs for CMD_802_11_SNMP_MIB */
#define SNMP_MIB_OID_BSS_TYPE 0x0000
#define SNMP_MIB_OID_OP_RATE_SET 0x0001
#define SNMP_MIB_OID_BEACON_PERIOD 0x0002 /* Reserved on v9+ */
#define SNMP_MIB_OID_DTIM_PERIOD 0x0003 /* Reserved on v9+ */
#define SNMP_MIB_OID_ASSOC_TIMEOUT 0x0004 /* Reserved on v9+ */
#define SNMP_MIB_OID_RTS_THRESHOLD 0x0005
#define SNMP_MIB_OID_SHORT_RETRY_LIMIT 0x0006
#define SNMP_MIB_OID_LONG_RETRY_LIMIT 0x0007
#define SNMP_MIB_OID_FRAG_THRESHOLD 0x0008
#define SNMP_MIB_OID_11D_ENABLE 0x0009
#define SNMP_MIB_OID_11H_ENABLE 0x000A
/* Define action or option for CMD_BT_ACCESS */
enum cmd_bt_access_opts {
/* The bt commands start at 5 instead of 1 because the old dft commands
* are mapped to 1-4. These old commands are no longer maintained and
* should not be called.
*/
CMD_ACT_BT_ACCESS_ADD = 5,
CMD_ACT_BT_ACCESS_DEL,
CMD_ACT_BT_ACCESS_LIST,
CMD_ACT_BT_ACCESS_RESET,
CMD_ACT_BT_ACCESS_SET_INVERT,
CMD_ACT_BT_ACCESS_GET_INVERT
};
/* Define action or option for CMD_FWT_ACCESS */
enum cmd_fwt_access_opts {
CMD_ACT_FWT_ACCESS_ADD = 1,
CMD_ACT_FWT_ACCESS_DEL,
CMD_ACT_FWT_ACCESS_LOOKUP,
CMD_ACT_FWT_ACCESS_LIST,
CMD_ACT_FWT_ACCESS_LIST_ROUTE,
CMD_ACT_FWT_ACCESS_LIST_NEIGHBOR,
CMD_ACT_FWT_ACCESS_RESET,
CMD_ACT_FWT_ACCESS_CLEANUP,
CMD_ACT_FWT_ACCESS_TIME,
};
/* Define action or option for CMD_802_11_HOST_SLEEP_CFG */
enum cmd_wol_cfg_opts {
CMD_ACT_ACTION_NONE = 0,
CMD_ACT_SET_WOL_RULE,
CMD_ACT_GET_WOL_RULE,
CMD_ACT_RESET_WOL_RULE,
};
/* Define action or option for CMD_MESH_ACCESS */
enum cmd_mesh_access_opts {
CMD_ACT_MESH_GET_TTL = 1,
CMD_ACT_MESH_SET_TTL,
CMD_ACT_MESH_GET_STATS,
CMD_ACT_MESH_GET_ANYCAST,
CMD_ACT_MESH_SET_ANYCAST,
CMD_ACT_MESH_SET_LINK_COSTS,
CMD_ACT_MESH_GET_LINK_COSTS,
CMD_ACT_MESH_SET_BCAST_RATE,
CMD_ACT_MESH_GET_BCAST_RATE,
CMD_ACT_MESH_SET_RREQ_DELAY,
CMD_ACT_MESH_GET_RREQ_DELAY,
CMD_ACT_MESH_SET_ROUTE_EXP,
CMD_ACT_MESH_GET_ROUTE_EXP,
CMD_ACT_MESH_SET_AUTOSTART_ENABLED,
CMD_ACT_MESH_GET_AUTOSTART_ENABLED,
CMD_ACT_MESH_SET_GET_PRB_RSP_LIMIT = 17,
};
/* Define actions and types for CMD_MESH_CONFIG */
enum cmd_mesh_config_actions {
CMD_ACT_MESH_CONFIG_STOP = 0,
CMD_ACT_MESH_CONFIG_START,
CMD_ACT_MESH_CONFIG_SET,
CMD_ACT_MESH_CONFIG_GET,
};
enum cmd_mesh_config_types {
CMD_TYPE_MESH_SET_BOOTFLAG = 1,
CMD_TYPE_MESH_SET_BOOTTIME,
CMD_TYPE_MESH_SET_DEF_CHANNEL,
CMD_TYPE_MESH_SET_MESH_IE,
CMD_TYPE_MESH_GET_DEFAULTS,
CMD_TYPE_MESH_GET_MESH_IE, /* GET_DEFAULTS is superset of GET_MESHIE */
};
/** Card Event definition */
#define MACREG_INT_CODE_TX_PPA_FREE 0
#define MACREG_INT_CODE_TX_DMA_DONE 1
#define MACREG_INT_CODE_LINK_LOST_W_SCAN 2
#define MACREG_INT_CODE_LINK_LOST_NO_SCAN 3
#define MACREG_INT_CODE_LINK_SENSED 4
#define MACREG_INT_CODE_CMD_FINISHED 5
#define MACREG_INT_CODE_MIB_CHANGED 6
#define MACREG_INT_CODE_INIT_DONE 7
#define MACREG_INT_CODE_DEAUTHENTICATED 8
#define MACREG_INT_CODE_DISASSOCIATED 9
#define MACREG_INT_CODE_PS_AWAKE 10
#define MACREG_INT_CODE_PS_SLEEP 11
#define MACREG_INT_CODE_MIC_ERR_MULTICAST 13
#define MACREG_INT_CODE_MIC_ERR_UNICAST 14
#define MACREG_INT_CODE_WM_AWAKE 15
#define MACREG_INT_CODE_DEEP_SLEEP_AWAKE 16
#define MACREG_INT_CODE_ADHOC_BCN_LOST 17
#define MACREG_INT_CODE_HOST_AWAKE 18
#define MACREG_INT_CODE_STOP_TX 19
#define MACREG_INT_CODE_START_TX 20
#define MACREG_INT_CODE_CHANNEL_SWITCH 21
#define MACREG_INT_CODE_MEASUREMENT_RDY 22
#define MACREG_INT_CODE_WMM_CHANGE 23
#define MACREG_INT_CODE_BG_SCAN_REPORT 24
#define MACREG_INT_CODE_RSSI_LOW 25
#define MACREG_INT_CODE_SNR_LOW 26
#define MACREG_INT_CODE_MAX_FAIL 27
#define MACREG_INT_CODE_RSSI_HIGH 28
#define MACREG_INT_CODE_SNR_HIGH 29
#define MACREG_INT_CODE_MESH_AUTO_STARTED 35
#define MACREG_INT_CODE_FIRMWARE_READY 48
/* 802.11-related definitions */
/* TxPD descriptor */
struct txpd {
/* union to cope up with later FW revisions */
union {
/* Current Tx packet status */
__le32 tx_status;
struct {
/* BSS type: client, AP, etc. */
u8 bss_type;
/* BSS number */
u8 bss_num;
/* Reserved */
__le16 reserved;
} bss;
} u;
/* Tx control */
__le32 tx_control;
__le32 tx_packet_location;
/* Tx packet length */
__le16 tx_packet_length;
/* First 2 byte of destination MAC address */
u8 tx_dest_addr_high[2];
/* Last 4 byte of destination MAC address */
u8 tx_dest_addr_low[4];
/* Pkt Priority */
u8 priority;
/* Pkt Trasnit Power control */
u8 powermgmt;
/* Amount of time the packet has been queued (units = 2ms) */
u8 pktdelay_2ms;
/* reserved */
u8 reserved1;
} __packed;
/* RxPD Descriptor */
struct rxpd {
/* union to cope up with later FW revisions */
union {
/* Current Rx packet status */
__le16 status;
struct {
/* BSS type: client, AP, etc. */
u8 bss_type;
/* BSS number */
u8 bss_num;
} __packed bss;
} __packed u;
/* SNR */
u8 snr;
/* Tx control */
u8 rx_control;
/* Pkt length */
__le16 pkt_len;
/* Noise Floor */
u8 nf;
/* Rx Packet Rate */
u8 rx_rate;
/* Pkt addr */
__le32 pkt_ptr;
/* Next Rx RxPD addr */
__le32 next_rxpd_ptr;
/* Pkt Priority */
u8 priority;
u8 reserved[3];
} __packed;
struct cmd_header {
__le16 command;
__le16 size;
__le16 seqnum;
__le16 result;
} __packed;
/* Generic structure to hold all key types. */
struct enc_key {
u16 len;
u16 flags; /* KEY_INFO_* from defs.h */
u16 type; /* KEY_TYPE_* from defs.h */
u8 key[32];
};
/* lbs_offset_value */
struct lbs_offset_value {
u32 offset;
u32 value;
} __packed;
#define MAX_11D_TRIPLETS 83
struct mrvl_ie_domain_param_set {
struct mrvl_ie_header header;
u8 country_code[3];
struct ieee80211_country_ie_triplet triplet[MAX_11D_TRIPLETS];
} __packed;
struct cmd_ds_802_11d_domain_info {
struct cmd_header hdr;
__le16 action;
struct mrvl_ie_domain_param_set domain;
} __packed;
/*
* Define data structure for CMD_GET_HW_SPEC
* This structure defines the response for the GET_HW_SPEC command
*/
struct cmd_ds_get_hw_spec {
struct cmd_header hdr;
/* HW Interface version number */
__le16 hwifversion;
/* HW version number */
__le16 version;
/* Max number of TxPD FW can handle */
__le16 nr_txpd;
/* Max no of Multicast address */
__le16 nr_mcast_adr;
/* MAC address */
u8 permanentaddr[6];
/* region Code */
__le16 regioncode;
/* Number of antenna used */
__le16 nr_antenna;
/* FW release number, example 0x01030304 = 2.3.4p1 */
__le32 fwrelease;
/* Base Address of TxPD queue */
__le32 wcb_base;
/* Read Pointer of RxPd queue */
__le32 rxpd_rdptr;
/* Write Pointer of RxPd queue */
__le32 rxpd_wrptr;
/*FW/HW capability */
__le32 fwcapinfo;
} __packed;
struct cmd_ds_802_11_subscribe_event {
struct cmd_header hdr;
__le16 action;
__le16 events;
/* A TLV to the CMD_802_11_SUBSCRIBE_EVENT command can contain a
* number of TLVs. From the v5.1 manual, those TLVs would add up to
* 40 bytes. However, future firmware might add additional TLVs, so I
* bump this up a bit.
*/
uint8_t tlv[128];
} __packed;
/*
* This scan handle Country Information IE(802.11d compliant)
* Define data structure for CMD_802_11_SCAN
*/
struct cmd_ds_802_11_scan {
struct cmd_header hdr;
uint8_t bsstype;
uint8_t bssid[ETH_ALEN];
uint8_t tlvbuffer[0];
} __packed;
struct cmd_ds_802_11_scan_rsp {
struct cmd_header hdr;
__le16 bssdescriptsize;
uint8_t nr_sets;
uint8_t bssdesc_and_tlvbuffer[0];
} __packed;
struct cmd_ds_802_11_get_log {
struct cmd_header hdr;
__le32 mcasttxframe;
__le32 failed;
__le32 retry;
__le32 multiretry;
__le32 framedup;
__le32 rtssuccess;
__le32 rtsfailure;
__le32 ackfailure;
__le32 rxfrag;
__le32 mcastrxframe;
__le32 fcserror;
__le32 txframe;
__le32 wepundecryptable;
} __packed;
struct cmd_ds_mac_control {
struct cmd_header hdr;
__le16 action;
u16 reserved;
} __packed;
struct cmd_ds_mac_multicast_adr {
struct cmd_header hdr;
__le16 action;
__le16 nr_of_adrs;
u8 maclist[ETH_ALEN * MRVDRV_MAX_MULTICAST_LIST_SIZE];
} __packed;
struct cmd_ds_802_11_authenticate {
struct cmd_header hdr;
u8 bssid[ETH_ALEN];
u8 authtype;
u8 reserved[10];
} __packed;
struct cmd_ds_802_11_deauthenticate {
struct cmd_header hdr;
u8 macaddr[ETH_ALEN];
__le16 reasoncode;
} __packed;
struct cmd_ds_802_11_associate {
struct cmd_header hdr;
u8 bssid[6];
__le16 capability;
__le16 listeninterval;
__le16 bcnperiod;
u8 dtimperiod;
u8 iebuf[512]; /* Enough for required and most optional IEs */
} __packed;
struct cmd_ds_802_11_associate_response {
struct cmd_header hdr;
__le16 capability;
__le16 statuscode;
__le16 aid;
u8 iebuf[512];
} __packed;
struct cmd_ds_802_11_set_wep {
struct cmd_header hdr;
/* ACT_ADD, ACT_REMOVE or ACT_ENABLE */
__le16 action;
/* key Index selected for Tx */
__le16 keyindex;
/* 40, 128bit or TXWEP */
uint8_t keytype[4];
uint8_t keymaterial[4][16];
} __packed;
struct cmd_ds_802_11_snmp_mib {
struct cmd_header hdr;
__le16 action;
__le16 oid;
__le16 bufsize;
u8 value[128];
} __packed;
struct cmd_ds_reg_access {
struct cmd_header hdr;
__le16 action;
__le16 offset;
union {
u8 bbp_rf; /* for BBP and RF registers */
__le32 mac; /* for MAC registers */
} value;
} __packed;
struct cmd_ds_802_11_radio_control {
struct cmd_header hdr;
__le16 action;
__le16 control;
} __packed;
struct cmd_ds_802_11_beacon_control {
struct cmd_header hdr;
__le16 action;
__le16 beacon_enable;
__le16 beacon_period;
} __packed;
struct cmd_ds_802_11_sleep_params {
struct cmd_header hdr;
/* ACT_GET/ACT_SET */
__le16 action;
/* Sleep clock error in ppm */
__le16 error;
/* Wakeup offset in usec */
__le16 offset;
/* Clock stabilization time in usec */
__le16 stabletime;
/* control periodic calibration */
uint8_t calcontrol;
/* control the use of external sleep clock */
uint8_t externalsleepclk;
/* reserved field, should be set to zero */
__le16 reserved;
} __packed;
struct cmd_ds_802_11_rf_channel {
struct cmd_header hdr;
__le16 action;
__le16 channel;
__le16 rftype; /* unused */
__le16 reserved; /* unused */
u8 channellist[32]; /* unused */
} __packed;
struct cmd_ds_802_11_rssi {
struct cmd_header hdr;
/* request: number of beacons (N) to average the SNR and NF over
* response: SNR of most recent beacon
*/
__le16 n_or_snr;
/* The following fields are only set in the response.
* In the request these are reserved and should be set to 0.
*/
__le16 nf; /* most recent beacon noise floor */
__le16 avg_snr; /* average SNR weighted by N from request */
__le16 avg_nf; /* average noise floor weighted by N from request */
} __packed;
struct cmd_ds_802_11_mac_address {
struct cmd_header hdr;
__le16 action;
u8 macadd[ETH_ALEN];
} __packed;
struct cmd_ds_802_11_rf_tx_power {
struct cmd_header hdr;
__le16 action;
__le16 curlevel;
s8 maxlevel;
s8 minlevel;
} __packed;
/* MONITOR_MODE only exists in OLPC v5 firmware */
struct cmd_ds_802_11_monitor_mode {
struct cmd_header hdr;
__le16 action;
__le16 mode;
} __packed;
struct cmd_ds_set_boot2_ver {
struct cmd_header hdr;
__le16 action;
__le16 version;
} __packed;
struct cmd_ds_802_11_fw_wake_method {
struct cmd_header hdr;
__le16 action;
__le16 method;
} __packed;
struct cmd_ds_802_11_ps_mode {
struct cmd_header hdr;
__le16 action;
/* Interval for keepalive in PS mode:
* 0x0000 = don't change
* 0x001E = firmware default
* 0xFFFF = disable
*/
__le16 nullpktinterval;
/* Number of DTIM intervals to wake up for:
* 0 = don't change
* 1 = firmware default
* 5 = max
*/
__le16 multipledtim;
__le16 reserved;
__le16 locallisteninterval;
/* AdHoc awake period (FW v9+ only):
* 0 = don't change
* 1 = always awake (IEEE standard behavior)
* 2 - 31 = sleep for (n - 1) periods and awake for 1 period
* 32 - 254 = invalid
* 255 = sleep at each ATIM
*/
__le16 adhoc_awake_period;
} __packed;
struct cmd_confirm_sleep {
struct cmd_header hdr;
__le16 action;
__le16 nullpktinterval;
__le16 multipledtim;
__le16 reserved;
__le16 locallisteninterval;
} __packed;
struct cmd_ds_802_11_data_rate {
struct cmd_header hdr;
__le16 action;
__le16 reserved;
u8 rates[MAX_RATES];
} __packed;
struct cmd_ds_802_11_rate_adapt_rateset {
struct cmd_header hdr;
__le16 action;
__le16 enablehwauto;
__le16 bitmap;
} __packed;
struct cmd_ds_802_11_ad_hoc_start {
struct cmd_header hdr;
u8 ssid[IEEE80211_MAX_SSID_LEN];
u8 bsstype;
__le16 beaconperiod;
u8 dtimperiod; /* Reserved on v9 and later */
struct ieee_ie_ibss_param_set ibss;
u8 reserved1[4];
struct ieee_ie_ds_param_set ds;
u8 reserved2[4];
__le16 probedelay; /* Reserved on v9 and later */
__le16 capability;
u8 rates[MAX_RATES];
u8 tlv_memory_size_pad[100];
} __packed;
struct cmd_ds_802_11_ad_hoc_result {
struct cmd_header hdr;
u8 pad[3];
u8 bssid[ETH_ALEN];
} __packed;
struct adhoc_bssdesc {
u8 bssid[ETH_ALEN];
u8 ssid[IEEE80211_MAX_SSID_LEN];
u8 type;
__le16 beaconperiod;
u8 dtimperiod;
__le64 timestamp;
__le64 localtime;
struct ieee_ie_ds_param_set ds;
u8 reserved1[4];
struct ieee_ie_ibss_param_set ibss;
u8 reserved2[4];
__le16 capability;
u8 rates[MAX_RATES];
/* DO NOT ADD ANY FIELDS TO THIS STRUCTURE. It is used below in the
* Adhoc join command and will cause a binary layout mismatch with
* the firmware
*/
} __packed;
struct cmd_ds_802_11_ad_hoc_join {
struct cmd_header hdr;
struct adhoc_bssdesc bss;
__le16 failtimeout; /* Reserved on v9 and later */
__le16 probedelay; /* Reserved on v9 and later */
} __packed;
struct cmd_ds_802_11_ad_hoc_stop {
struct cmd_header hdr;
} __packed;
struct cmd_ds_802_11_enable_rsn {
struct cmd_header hdr;
__le16 action;
__le16 enable;
} __packed;
struct MrvlIEtype_keyParamSet {
/* type ID */
__le16 type;
/* length of Payload */
__le16 length;
/* type of key: WEP=0, TKIP=1, AES=2 */
__le16 keytypeid;
/* key control Info specific to a keytypeid */
__le16 keyinfo;
/* length of key */
__le16 keylen;
/* key material of size keylen */
u8 key[32];
} __packed;
#define MAX_WOL_RULES 16
struct host_wol_rule {
uint8_t rule_no;
uint8_t rule_ops;
__le16 sig_offset;
__le16 sig_length;
__le16 reserve;
__be32 sig_mask;
__be32 signature;
} __packed;
struct wol_config {
uint8_t action;
uint8_t pattern;
uint8_t no_rules_in_cmd;
uint8_t result;
struct host_wol_rule rule[MAX_WOL_RULES];
} __packed;
struct cmd_ds_host_sleep {
struct cmd_header hdr;
__le32 criteria;
uint8_t gpio;
uint16_t gap;
struct wol_config wol_conf;
} __packed;
struct cmd_ds_802_11_key_material {
struct cmd_header hdr;
__le16 action;
struct MrvlIEtype_keyParamSet keyParamSet[2];
} __packed;
struct cmd_ds_802_11_eeprom_access {
struct cmd_header hdr;
__le16 action;
__le16 offset;
__le16 len;
/* firmware says it returns a maximum of 20 bytes */
#define LBS_EEPROM_READ_LEN 20
u8 value[LBS_EEPROM_READ_LEN];
} __packed;
struct cmd_ds_802_11_tpc_cfg {
struct cmd_header hdr;
__le16 action;
uint8_t enable;
int8_t P0;
int8_t P1;
int8_t P2;
uint8_t usesnr;
} __packed;
struct cmd_ds_802_11_pa_cfg {
struct cmd_header hdr;
__le16 action;
uint8_t enable;
int8_t P0;
int8_t P1;
int8_t P2;
} __packed;
struct cmd_ds_802_11_led_ctrl {
struct cmd_header hdr;
__le16 action;
__le16 numled;
u8 data[256];
} __packed;
/* Automatic Frequency Control */
struct cmd_ds_802_11_afc {
struct cmd_header hdr;
__le16 afc_auto;
union {
struct {
__le16 threshold;
__le16 period;
};
struct {
__le16 timing_offset; /* signed */
__le16 carrier_offset; /* signed */
};
};
} __packed;
struct cmd_tx_rate_query {
__le16 txrate;
} __packed;
struct cmd_ds_get_tsf {
__le64 tsfvalue;
} __packed;
struct cmd_ds_bt_access {
struct cmd_header hdr;
__le16 action;
__le32 id;
u8 addr1[ETH_ALEN];
u8 addr2[ETH_ALEN];
} __packed;
struct cmd_ds_fwt_access {
struct cmd_header hdr;
__le16 action;
__le32 id;
u8 valid;
u8 da[ETH_ALEN];
u8 dir;
u8 ra[ETH_ALEN];
__le32 ssn;
__le32 dsn;
__le32 metric;
u8 rate;
u8 hopcount;
u8 ttl;
__le32 expiration;
u8 sleepmode;
__le32 snr;
__le32 references;
u8 prec[ETH_ALEN];
} __packed;
struct cmd_ds_mesh_config {
struct cmd_header hdr;
__le16 action;
__le16 channel;
__le16 type;
__le16 length;
u8 data[128]; /* last position reserved */
} __packed;
struct cmd_ds_mesh_access {
struct cmd_header hdr;
__le16 action;
__le32 data[32]; /* last position reserved */
} __packed;
/* Number of stats counters returned by the firmware */
#define MESH_STATS_NUM 8
#endif