blob: 622d27b6d8f214a1e69b92b93c4c570a7b22b8df [file] [log] [blame]
/*
* mac80211 glue code for mac80211 Prism54 drivers
*
* Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
* Copyright (c) 2007-2009, Christian Lamparter <chunkeey@web.de>
* Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
*
* Based on:
* - the islsm (softmac prism54) driver, which is:
* Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al.
* - stlc45xx driver
* Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies).
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/firmware.h>
#include <linux/etherdevice.h>
#include <net/mac80211.h>
#include "p54.h"
#include "lmac.h"
static int modparam_nohwcrypt;
module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
MODULE_DESCRIPTION("Softmac Prism54 common code");
MODULE_LICENSE("GPL");
MODULE_ALIAS("prism54common");
static int p54_sta_add_remove(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta)
{
struct p54_common *priv = hw->priv;
/*
* Notify the firmware that we don't want or we don't
* need to buffer frames for this station anymore.
*/
p54_sta_unlock(priv, sta->addr);
return 0;
}
static void p54_sta_notify(struct ieee80211_hw *dev, struct ieee80211_vif *vif,
enum sta_notify_cmd notify_cmd,
struct ieee80211_sta *sta)
{
struct p54_common *priv = dev->priv;
switch (notify_cmd) {
case STA_NOTIFY_AWAKE:
/* update the firmware's filter table */
p54_sta_unlock(priv, sta->addr);
break;
default:
break;
}
}
static int p54_set_tim(struct ieee80211_hw *dev, struct ieee80211_sta *sta,
bool set)
{
struct p54_common *priv = dev->priv;
return p54_update_beacon_tim(priv, sta->aid, set);
}
u8 *p54_find_ie(struct sk_buff *skb, u8 ie)
{
struct ieee80211_mgmt *mgmt = (void *)skb->data;
u8 *pos, *end;
if (skb->len <= sizeof(mgmt))
return NULL;
pos = (u8 *)mgmt->u.beacon.variable;
end = skb->data + skb->len;
while (pos < end) {
if (pos + 2 + pos[1] > end)
return NULL;
if (pos[0] == ie)
return pos;
pos += 2 + pos[1];
}
return NULL;
}
static int p54_beacon_format_ie_tim(struct sk_buff *skb)
{
/*
* the good excuse for this mess is ... the firmware.
* The dummy TIM MUST be at the end of the beacon frame,
* because it'll be overwritten!
*/
u8 *tim;
u8 dtim_len;
u8 dtim_period;
u8 *next;
tim = p54_find_ie(skb, WLAN_EID_TIM);
if (!tim)
return 0;
dtim_len = tim[1];
dtim_period = tim[3];
next = tim + 2 + dtim_len;
if (dtim_len < 3)
return -EINVAL;
memmove(tim, next, skb_tail_pointer(skb) - next);
tim = skb_tail_pointer(skb) - (dtim_len + 2);
/* add the dummy at the end */
tim[0] = WLAN_EID_TIM;
tim[1] = 3;
tim[2] = 0;
tim[3] = dtim_period;
tim[4] = 0;
if (dtim_len > 3)
skb_trim(skb, skb->len - (dtim_len - 3));
return 0;
}
static int p54_beacon_update(struct p54_common *priv,
struct ieee80211_vif *vif)
{
struct sk_buff *beacon;
int ret;
beacon = ieee80211_beacon_get(priv->hw, vif);
if (!beacon)
return -ENOMEM;
ret = p54_beacon_format_ie_tim(beacon);
if (ret)
return ret;
/*
* During operation, the firmware takes care of beaconing.
* The driver only needs to upload a new beacon template, once
* the template was changed by the stack or userspace.
*
* LMAC API 3.2.2 also specifies that the driver does not need
* to cancel the old beacon template by hand, instead the firmware
* will release the previous one through the feedback mechanism.
*/
WARN_ON(p54_tx_80211(priv->hw, beacon));
priv->tsf_high32 = 0;
priv->tsf_low32 = 0;
return 0;
}
static int p54_start(struct ieee80211_hw *dev)
{
struct p54_common *priv = dev->priv;
int err;
mutex_lock(&priv->conf_mutex);
err = priv->open(dev);
if (err)
goto out;
P54_SET_QUEUE(priv->qos_params[0], 0x0002, 0x0003, 0x0007, 47);
P54_SET_QUEUE(priv->qos_params[1], 0x0002, 0x0007, 0x000f, 94);
P54_SET_QUEUE(priv->qos_params[2], 0x0003, 0x000f, 0x03ff, 0);
P54_SET_QUEUE(priv->qos_params[3], 0x0007, 0x000f, 0x03ff, 0);
err = p54_set_edcf(priv);
if (err)
goto out;
memset(priv->bssid, ~0, ETH_ALEN);
priv->mode = NL80211_IFTYPE_MONITOR;
err = p54_setup_mac(priv);
if (err) {
priv->mode = NL80211_IFTYPE_UNSPECIFIED;
goto out;
}
ieee80211_queue_delayed_work(dev, &priv->work, 0);
priv->softled_state = 0;
err = p54_set_leds(priv);
out:
mutex_unlock(&priv->conf_mutex);
return err;
}
static void p54_stop(struct ieee80211_hw *dev)
{
struct p54_common *priv = dev->priv;
int i;
mutex_lock(&priv->conf_mutex);
priv->mode = NL80211_IFTYPE_UNSPECIFIED;
priv->softled_state = 0;
p54_set_leds(priv);
cancel_delayed_work_sync(&priv->work);
priv->stop(dev);
skb_queue_purge(&priv->tx_pending);
skb_queue_purge(&priv->tx_queue);
for (i = 0; i < P54_QUEUE_NUM; i++) {
priv->tx_stats[i].count = 0;
priv->tx_stats[i].len = 0;
}
priv->beacon_req_id = cpu_to_le32(0);
priv->tsf_high32 = priv->tsf_low32 = 0;
mutex_unlock(&priv->conf_mutex);
}
static int p54_add_interface(struct ieee80211_hw *dev,
struct ieee80211_vif *vif)
{
struct p54_common *priv = dev->priv;
mutex_lock(&priv->conf_mutex);
if (priv->mode != NL80211_IFTYPE_MONITOR) {
mutex_unlock(&priv->conf_mutex);
return -EOPNOTSUPP;
}
priv->vif = vif;
switch (vif->type) {
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_MESH_POINT:
priv->mode = vif->type;
break;
default:
mutex_unlock(&priv->conf_mutex);
return -EOPNOTSUPP;
}
memcpy(priv->mac_addr, vif->addr, ETH_ALEN);
p54_setup_mac(priv);
mutex_unlock(&priv->conf_mutex);
return 0;
}
static void p54_remove_interface(struct ieee80211_hw *dev,
struct ieee80211_vif *vif)
{
struct p54_common *priv = dev->priv;
mutex_lock(&priv->conf_mutex);
priv->vif = NULL;
/*
* LMAC API 3.2.2 states that any active beacon template must be
* canceled by the driver before attempting a mode transition.
*/
if (le32_to_cpu(priv->beacon_req_id) != 0) {
p54_tx_cancel(priv, priv->beacon_req_id);
wait_for_completion_interruptible_timeout(&priv->beacon_comp, HZ);
}
priv->mode = NL80211_IFTYPE_MONITOR;
memset(priv->mac_addr, 0, ETH_ALEN);
memset(priv->bssid, 0, ETH_ALEN);
p54_setup_mac(priv);
mutex_unlock(&priv->conf_mutex);
}
static int p54_config(struct ieee80211_hw *dev, u32 changed)
{
int ret = 0;
struct p54_common *priv = dev->priv;
struct ieee80211_conf *conf = &dev->conf;
mutex_lock(&priv->conf_mutex);
if (changed & IEEE80211_CONF_CHANGE_POWER)
priv->output_power = conf->power_level << 2;
if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
ret = p54_scan(priv, P54_SCAN_EXIT, 0);
if (ret)
goto out;
}
if (changed & IEEE80211_CONF_CHANGE_PS) {
ret = p54_set_ps(priv);
if (ret)
goto out;
}
if (changed & IEEE80211_CONF_CHANGE_IDLE) {
ret = p54_setup_mac(priv);
if (ret)
goto out;
}
out:
mutex_unlock(&priv->conf_mutex);
return ret;
}
static void p54_configure_filter(struct ieee80211_hw *dev,
unsigned int changed_flags,
unsigned int *total_flags,
u64 multicast)
{
struct p54_common *priv = dev->priv;
*total_flags &= FIF_PROMISC_IN_BSS |
FIF_OTHER_BSS;
priv->filter_flags = *total_flags;
if (changed_flags & (FIF_PROMISC_IN_BSS | FIF_OTHER_BSS))
p54_setup_mac(priv);
}
static int p54_conf_tx(struct ieee80211_hw *dev, u16 queue,
const struct ieee80211_tx_queue_params *params)
{
struct p54_common *priv = dev->priv;
int ret;
mutex_lock(&priv->conf_mutex);
if (queue < dev->queues) {
P54_SET_QUEUE(priv->qos_params[queue], params->aifs,
params->cw_min, params->cw_max, params->txop);
ret = p54_set_edcf(priv);
} else
ret = -EINVAL;
mutex_unlock(&priv->conf_mutex);
return ret;
}
static void p54_work(struct work_struct *work)
{
struct p54_common *priv = container_of(work, struct p54_common,
work.work);
if (unlikely(priv->mode == NL80211_IFTYPE_UNSPECIFIED))
return ;
/*
* TODO: walk through tx_queue and do the following tasks
* 1. initiate bursts.
* 2. cancel stuck frames / reset the device if necessary.
*/
p54_fetch_statistics(priv);
}
static int p54_get_stats(struct ieee80211_hw *dev,
struct ieee80211_low_level_stats *stats)
{
struct p54_common *priv = dev->priv;
memcpy(stats, &priv->stats, sizeof(*stats));
return 0;
}
static void p54_bss_info_changed(struct ieee80211_hw *dev,
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *info,
u32 changed)
{
struct p54_common *priv = dev->priv;
mutex_lock(&priv->conf_mutex);
if (changed & BSS_CHANGED_BSSID) {
memcpy(priv->bssid, info->bssid, ETH_ALEN);
p54_setup_mac(priv);
}
if (changed & BSS_CHANGED_BEACON) {
p54_scan(priv, P54_SCAN_EXIT, 0);
p54_setup_mac(priv);
p54_beacon_update(priv, vif);
p54_set_edcf(priv);
}
if (changed & (BSS_CHANGED_ERP_SLOT | BSS_CHANGED_BEACON)) {
priv->use_short_slot = info->use_short_slot;
p54_set_edcf(priv);
}
if (changed & BSS_CHANGED_BASIC_RATES) {
if (dev->conf.channel->band == IEEE80211_BAND_5GHZ)
priv->basic_rate_mask = (info->basic_rates << 4);
else
priv->basic_rate_mask = info->basic_rates;
p54_setup_mac(priv);
if (priv->fw_var >= 0x500)
p54_scan(priv, P54_SCAN_EXIT, 0);
}
if (changed & BSS_CHANGED_ASSOC) {
if (info->assoc) {
priv->aid = info->aid;
priv->wakeup_timer = info->beacon_int *
info->dtim_period * 5;
p54_setup_mac(priv);
} else {
priv->wakeup_timer = 500;
priv->aid = 0;
}
}
mutex_unlock(&priv->conf_mutex);
}
static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd,
struct ieee80211_vif *vif, struct ieee80211_sta *sta,
struct ieee80211_key_conf *key)
{
struct p54_common *priv = dev->priv;
int slot, ret = 0;
u8 algo = 0;
u8 *addr = NULL;
if (modparam_nohwcrypt)
return -EOPNOTSUPP;
mutex_lock(&priv->conf_mutex);
if (cmd == SET_KEY) {
switch (key->cipher) {
case WLAN_CIPHER_SUITE_TKIP:
if (!(priv->privacy_caps & (BR_DESC_PRIV_CAP_MICHAEL |
BR_DESC_PRIV_CAP_TKIP))) {
ret = -EOPNOTSUPP;
goto out_unlock;
}
key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
algo = P54_CRYPTO_TKIPMICHAEL;
break;
case WLAN_CIPHER_SUITE_WEP40:
case WLAN_CIPHER_SUITE_WEP104:
if (!(priv->privacy_caps & BR_DESC_PRIV_CAP_WEP)) {
ret = -EOPNOTSUPP;
goto out_unlock;
}
key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
algo = P54_CRYPTO_WEP;
break;
case WLAN_CIPHER_SUITE_CCMP:
if (!(priv->privacy_caps & BR_DESC_PRIV_CAP_AESCCMP)) {
ret = -EOPNOTSUPP;
goto out_unlock;
}
key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
algo = P54_CRYPTO_AESCCMP;
break;
default:
ret = -EOPNOTSUPP;
goto out_unlock;
}
slot = bitmap_find_free_region(priv->used_rxkeys,
priv->rx_keycache_size, 0);
if (slot < 0) {
/*
* The device supports the choosen algorithm, but the
* firmware does not provide enough key slots to store
* all of them.
* But encryption offload for outgoing frames is always
* possible, so we just pretend that the upload was
* successful and do the decryption in software.
*/
/* mark the key as invalid. */
key->hw_key_idx = 0xff;
goto out_unlock;
}
} else {
slot = key->hw_key_idx;
if (slot == 0xff) {
/* This key was not uploaded into the rx key cache. */
goto out_unlock;
}
bitmap_release_region(priv->used_rxkeys, slot, 0);
algo = 0;
}
if (sta)
addr = sta->addr;
ret = p54_upload_key(priv, algo, slot, key->keyidx,
key->keylen, addr, key->key);
if (ret) {
bitmap_release_region(priv->used_rxkeys, slot, 0);
ret = -EOPNOTSUPP;
goto out_unlock;
}
key->hw_key_idx = slot;
out_unlock:
mutex_unlock(&priv->conf_mutex);
return ret;
}
static int p54_get_survey(struct ieee80211_hw *dev, int idx,
struct survey_info *survey)
{
struct p54_common *priv = dev->priv;
struct ieee80211_conf *conf = &dev->conf;
if (idx != 0)
return -ENOENT;
survey->channel = conf->channel;
survey->filled = SURVEY_INFO_NOISE_DBM;
survey->noise = clamp_t(s8, priv->noise, -128, 127);
return 0;
}
static const struct ieee80211_ops p54_ops = {
.tx = p54_tx_80211,
.start = p54_start,
.stop = p54_stop,
.add_interface = p54_add_interface,
.remove_interface = p54_remove_interface,
.set_tim = p54_set_tim,
.sta_notify = p54_sta_notify,
.sta_add = p54_sta_add_remove,
.sta_remove = p54_sta_add_remove,
.set_key = p54_set_key,
.config = p54_config,
.bss_info_changed = p54_bss_info_changed,
.configure_filter = p54_configure_filter,
.conf_tx = p54_conf_tx,
.get_stats = p54_get_stats,
.get_survey = p54_get_survey,
};
struct ieee80211_hw *p54_init_common(size_t priv_data_len)
{
struct ieee80211_hw *dev;
struct p54_common *priv;
dev = ieee80211_alloc_hw(priv_data_len, &p54_ops);
if (!dev)
return NULL;
priv = dev->priv;
priv->hw = dev;
priv->mode = NL80211_IFTYPE_UNSPECIFIED;
priv->basic_rate_mask = 0x15f;
spin_lock_init(&priv->tx_stats_lock);
skb_queue_head_init(&priv->tx_queue);
skb_queue_head_init(&priv->tx_pending);
dev->flags = IEEE80211_HW_RX_INCLUDES_FCS |
IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_SUPPORTS_PS |
IEEE80211_HW_PS_NULLFUNC_STACK |
IEEE80211_HW_BEACON_FILTER |
IEEE80211_HW_REPORTS_TX_ACK_STATUS;
dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_ADHOC) |
BIT(NL80211_IFTYPE_AP) |
BIT(NL80211_IFTYPE_MESH_POINT);
dev->channel_change_time = 1000; /* TODO: find actual value */
priv->beacon_req_id = cpu_to_le32(0);
priv->tx_stats[P54_QUEUE_BEACON].limit = 1;
priv->tx_stats[P54_QUEUE_FWSCAN].limit = 1;
priv->tx_stats[P54_QUEUE_MGMT].limit = 3;
priv->tx_stats[P54_QUEUE_CAB].limit = 3;
priv->tx_stats[P54_QUEUE_DATA].limit = 5;
dev->queues = 1;
priv->noise = -94;
/*
* We support at most 8 tries no matter which rate they're at,
* we cannot support max_rates * max_rate_tries as we set it
* here, but setting it correctly to 4/2 or so would limit us
* artificially if the RC algorithm wants just two rates, so
* let's say 4/7, we'll redistribute it at TX time, see the
* comments there.
*/
dev->max_rates = 4;
dev->max_rate_tries = 7;
dev->extra_tx_headroom = sizeof(struct p54_hdr) + 4 +
sizeof(struct p54_tx_data);
/*
* For now, disable PS by default because it affects
* link stability significantly.
*/
dev->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
mutex_init(&priv->conf_mutex);
mutex_init(&priv->eeprom_mutex);
init_completion(&priv->eeprom_comp);
init_completion(&priv->beacon_comp);
INIT_DELAYED_WORK(&priv->work, p54_work);
return dev;
}
EXPORT_SYMBOL_GPL(p54_init_common);
int p54_register_common(struct ieee80211_hw *dev, struct device *pdev)
{
struct p54_common *priv = dev->priv;
int err;
err = ieee80211_register_hw(dev);
if (err) {
dev_err(pdev, "Cannot register device (%d).\n", err);
return err;
}
#ifdef CONFIG_P54_LEDS
err = p54_init_leds(priv);
if (err)
return err;
#endif /* CONFIG_P54_LEDS */
dev_info(pdev, "is registered as '%s'\n", wiphy_name(dev->wiphy));
return 0;
}
EXPORT_SYMBOL_GPL(p54_register_common);
void p54_free_common(struct ieee80211_hw *dev)
{
struct p54_common *priv = dev->priv;
unsigned int i;
for (i = 0; i < IEEE80211_NUM_BANDS; i++)
kfree(priv->band_table[i]);
kfree(priv->iq_autocal);
kfree(priv->output_limit);
kfree(priv->curve_data);
kfree(priv->used_rxkeys);
priv->iq_autocal = NULL;
priv->output_limit = NULL;
priv->curve_data = NULL;
priv->used_rxkeys = NULL;
ieee80211_free_hw(dev);
}
EXPORT_SYMBOL_GPL(p54_free_common);
void p54_unregister_common(struct ieee80211_hw *dev)
{
struct p54_common *priv = dev->priv;
#ifdef CONFIG_P54_LEDS
p54_unregister_leds(priv);
#endif /* CONFIG_P54_LEDS */
ieee80211_unregister_hw(dev);
mutex_destroy(&priv->conf_mutex);
mutex_destroy(&priv->eeprom_mutex);
}
EXPORT_SYMBOL_GPL(p54_unregister_common);