blob: 2f3c904072273fcdaf5c5a660405281720dff7aa [file] [log] [blame]
/*
* PCIe Native PME support
*
* Copyright (C) 2007 - 2009 Intel Corp
* Copyright (C) 2007 - 2009 Shaohua Li <shaohua.li@intel.com>
* Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
* License V2. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/pcieport_if.h>
#include <linux/acpi.h>
#include <linux/pci-acpi.h>
#include <linux/pm_runtime.h>
#include "../pci.h"
#include "portdrv.h"
#define PCI_EXP_RTSTA_PME 0x10000 /* PME status */
#define PCI_EXP_RTSTA_PENDING 0x20000 /* PME pending */
/*
* If this switch is set, MSI will not be used for PCIe PME signaling. This
* causes the PCIe port driver to use INTx interrupts only, but it turns out
* that using MSI for PCIe PME signaling doesn't play well with PCIe PME-based
* wake-up from system sleep states.
*/
bool pcie_pme_msi_disabled;
static int __init pcie_pme_setup(char *str)
{
if (!strncmp(str, "nomsi", 5))
pcie_pme_msi_disabled = true;
return 1;
}
__setup("pcie_pme=", pcie_pme_setup);
struct pcie_pme_service_data {
spinlock_t lock;
struct pcie_device *srv;
struct work_struct work;
bool noirq; /* Don't enable the PME interrupt used by this service. */
};
/**
* pcie_pme_interrupt_enable - Enable/disable PCIe PME interrupt generation.
* @dev: PCIe root port or event collector.
* @enable: Enable or disable the interrupt.
*/
void pcie_pme_interrupt_enable(struct pci_dev *dev, bool enable)
{
int rtctl_pos;
u16 rtctl;
rtctl_pos = pci_pcie_cap(dev) + PCI_EXP_RTCTL;
pci_read_config_word(dev, rtctl_pos, &rtctl);
if (enable)
rtctl |= PCI_EXP_RTCTL_PMEIE;
else
rtctl &= ~PCI_EXP_RTCTL_PMEIE;
pci_write_config_word(dev, rtctl_pos, rtctl);
}
/**
* pcie_pme_clear_status - Clear root port PME interrupt status.
* @dev: PCIe root port or event collector.
*/
static void pcie_pme_clear_status(struct pci_dev *dev)
{
int rtsta_pos;
u32 rtsta;
rtsta_pos = pci_pcie_cap(dev) + PCI_EXP_RTSTA;
pci_read_config_dword(dev, rtsta_pos, &rtsta);
rtsta |= PCI_EXP_RTSTA_PME;
pci_write_config_dword(dev, rtsta_pos, rtsta);
}
/**
* pcie_pme_walk_bus - Scan a PCI bus for devices asserting PME#.
* @bus: PCI bus to scan.
*
* Scan given PCI bus and all buses under it for devices asserting PME#.
*/
static bool pcie_pme_walk_bus(struct pci_bus *bus)
{
struct pci_dev *dev;
bool ret = false;
list_for_each_entry(dev, &bus->devices, bus_list) {
/* Skip PCIe devices in case we started from a root port. */
if (!pci_is_pcie(dev) && pci_check_pme_status(dev)) {
pm_request_resume(&dev->dev);
pci_wakeup_event(dev);
ret = true;
}
if (dev->subordinate && pcie_pme_walk_bus(dev->subordinate))
ret = true;
}
return ret;
}
/**
* pcie_pme_from_pci_bridge - Check if PCIe-PCI bridge generated a PME.
* @bus: Secondary bus of the bridge.
* @devfn: Device/function number to check.
*
* PME from PCI devices under a PCIe-PCI bridge may be converted to an in-band
* PCIe PME message. In such that case the bridge should use the Requester ID
* of device/function number 0 on its secondary bus.
*/
static bool pcie_pme_from_pci_bridge(struct pci_bus *bus, u8 devfn)
{
struct pci_dev *dev;
bool found = false;
if (devfn)
return false;
dev = pci_dev_get(bus->self);
if (!dev)
return false;
if (pci_is_pcie(dev) && dev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) {
down_read(&pci_bus_sem);
if (pcie_pme_walk_bus(bus))
found = true;
up_read(&pci_bus_sem);
}
pci_dev_put(dev);
return found;
}
/**
* pcie_pme_handle_request - Find device that generated PME and handle it.
* @port: Root port or event collector that generated the PME interrupt.
* @req_id: PCIe Requester ID of the device that generated the PME.
*/
static void pcie_pme_handle_request(struct pci_dev *port, u16 req_id)
{
u8 busnr = req_id >> 8, devfn = req_id & 0xff;
struct pci_bus *bus;
struct pci_dev *dev;
bool found = false;
/* First, check if the PME is from the root port itself. */
if (port->devfn == devfn && port->bus->number == busnr) {
if (pci_check_pme_status(port)) {
pm_request_resume(&port->dev);
found = true;
} else {
/*
* Apparently, the root port generated the PME on behalf
* of a non-PCIe device downstream. If this is done by
* a root port, the Requester ID field in its status
* register may contain either the root port's, or the
* source device's information (PCI Express Base
* Specification, Rev. 2.0, Section 6.1.9).
*/
down_read(&pci_bus_sem);
found = pcie_pme_walk_bus(port->subordinate);
up_read(&pci_bus_sem);
}
goto out;
}
/* Second, find the bus the source device is on. */
bus = pci_find_bus(pci_domain_nr(port->bus), busnr);
if (!bus)
goto out;
/* Next, check if the PME is from a PCIe-PCI bridge. */
found = pcie_pme_from_pci_bridge(bus, devfn);
if (found)
goto out;
/* Finally, try to find the PME source on the bus. */
down_read(&pci_bus_sem);
list_for_each_entry(dev, &bus->devices, bus_list) {
pci_dev_get(dev);
if (dev->devfn == devfn) {
found = true;
break;
}
pci_dev_put(dev);
}
up_read(&pci_bus_sem);
if (found) {
/* The device is there, but we have to check its PME status. */
found = pci_check_pme_status(dev);
if (found) {
pm_request_resume(&dev->dev);
pci_wakeup_event(dev);
}
pci_dev_put(dev);
} else if (devfn) {
/*
* The device is not there, but we can still try to recover by
* assuming that the PME was reported by a PCIe-PCI bridge that
* used devfn different from zero.
*/
dev_dbg(&port->dev, "PME interrupt generated for "
"non-existent device %02x:%02x.%d\n",
busnr, PCI_SLOT(devfn), PCI_FUNC(devfn));
found = pcie_pme_from_pci_bridge(bus, 0);
}
out:
if (!found)
dev_dbg(&port->dev, "Spurious native PME interrupt!\n");
}
/**
* pcie_pme_work_fn - Work handler for PCIe PME interrupt.
* @work: Work structure giving access to service data.
*/
static void pcie_pme_work_fn(struct work_struct *work)
{
struct pcie_pme_service_data *data =
container_of(work, struct pcie_pme_service_data, work);
struct pci_dev *port = data->srv->port;
int rtsta_pos;
u32 rtsta;
rtsta_pos = pci_pcie_cap(port) + PCI_EXP_RTSTA;
spin_lock_irq(&data->lock);
for (;;) {
if (data->noirq)
break;
pci_read_config_dword(port, rtsta_pos, &rtsta);
if (rtsta & PCI_EXP_RTSTA_PME) {
/*
* Clear PME status of the port. If there are other
* pending PMEs, the status will be set again.
*/
pcie_pme_clear_status(port);
spin_unlock_irq(&data->lock);
pcie_pme_handle_request(port, rtsta & 0xffff);
spin_lock_irq(&data->lock);
continue;
}
/* No need to loop if there are no more PMEs pending. */
if (!(rtsta & PCI_EXP_RTSTA_PENDING))
break;
spin_unlock_irq(&data->lock);
cpu_relax();
spin_lock_irq(&data->lock);
}
if (!data->noirq)
pcie_pme_interrupt_enable(port, true);
spin_unlock_irq(&data->lock);
}
/**
* pcie_pme_irq - Interrupt handler for PCIe root port PME interrupt.
* @irq: Interrupt vector.
* @context: Interrupt context pointer.
*/
static irqreturn_t pcie_pme_irq(int irq, void *context)
{
struct pci_dev *port;
struct pcie_pme_service_data *data;
int rtsta_pos;
u32 rtsta;
unsigned long flags;
port = ((struct pcie_device *)context)->port;
data = get_service_data((struct pcie_device *)context);
rtsta_pos = pci_pcie_cap(port) + PCI_EXP_RTSTA;
spin_lock_irqsave(&data->lock, flags);
pci_read_config_dword(port, rtsta_pos, &rtsta);
if (!(rtsta & PCI_EXP_RTSTA_PME)) {
spin_unlock_irqrestore(&data->lock, flags);
return IRQ_NONE;
}
pcie_pme_interrupt_enable(port, false);
spin_unlock_irqrestore(&data->lock, flags);
/* We don't use pm_wq, because it's freezable. */
schedule_work(&data->work);
return IRQ_HANDLED;
}
/**
* pcie_pme_set_native - Set the PME interrupt flag for given device.
* @dev: PCI device to handle.
* @ign: Ignored.
*/
static int pcie_pme_set_native(struct pci_dev *dev, void *ign)
{
dev_info(&dev->dev, "Signaling PME through PCIe PME interrupt\n");
device_set_run_wake(&dev->dev, true);
dev->pme_interrupt = true;
return 0;
}
/**
* pcie_pme_mark_devices - Set the PME interrupt flag for devices below a port.
* @port: PCIe root port or event collector to handle.
*
* For each device below given root port, including the port itself (or for each
* root complex integrated endpoint if @port is a root complex event collector)
* set the flag indicating that it can signal run-time wake-up events via PCIe
* PME interrupts.
*/
static void pcie_pme_mark_devices(struct pci_dev *port)
{
pcie_pme_set_native(port, NULL);
if (port->subordinate) {
pci_walk_bus(port->subordinate, pcie_pme_set_native, NULL);
} else {
struct pci_bus *bus = port->bus;
struct pci_dev *dev;
/* Check if this is a root port event collector. */
if (port->pcie_type != PCI_EXP_TYPE_RC_EC || !bus)
return;
down_read(&pci_bus_sem);
list_for_each_entry(dev, &bus->devices, bus_list)
if (pci_is_pcie(dev)
&& dev->pcie_type == PCI_EXP_TYPE_RC_END)
pcie_pme_set_native(dev, NULL);
up_read(&pci_bus_sem);
}
}
/**
* pcie_pme_probe - Initialize PCIe PME service for given root port.
* @srv: PCIe service to initialize.
*/
static int pcie_pme_probe(struct pcie_device *srv)
{
struct pci_dev *port;
struct pcie_pme_service_data *data;
int ret;
data = kzalloc(sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
spin_lock_init(&data->lock);
INIT_WORK(&data->work, pcie_pme_work_fn);
data->srv = srv;
set_service_data(srv, data);
port = srv->port;
pcie_pme_interrupt_enable(port, false);
pcie_pme_clear_status(port);
ret = request_irq(srv->irq, pcie_pme_irq, IRQF_SHARED, "PCIe PME", srv);
if (ret) {
kfree(data);
} else {
pcie_pme_mark_devices(port);
pcie_pme_interrupt_enable(port, true);
}
return ret;
}
/**
* pcie_pme_suspend - Suspend PCIe PME service device.
* @srv: PCIe service device to suspend.
*/
static int pcie_pme_suspend(struct pcie_device *srv)
{
struct pcie_pme_service_data *data = get_service_data(srv);
struct pci_dev *port = srv->port;
spin_lock_irq(&data->lock);
pcie_pme_interrupt_enable(port, false);
pcie_pme_clear_status(port);
data->noirq = true;
spin_unlock_irq(&data->lock);
synchronize_irq(srv->irq);
return 0;
}
/**
* pcie_pme_resume - Resume PCIe PME service device.
* @srv - PCIe service device to resume.
*/
static int pcie_pme_resume(struct pcie_device *srv)
{
struct pcie_pme_service_data *data = get_service_data(srv);
struct pci_dev *port = srv->port;
spin_lock_irq(&data->lock);
data->noirq = false;
pcie_pme_clear_status(port);
pcie_pme_interrupt_enable(port, true);
spin_unlock_irq(&data->lock);
return 0;
}
/**
* pcie_pme_remove - Prepare PCIe PME service device for removal.
* @srv - PCIe service device to resume.
*/
static void pcie_pme_remove(struct pcie_device *srv)
{
pcie_pme_suspend(srv);
free_irq(srv->irq, srv);
kfree(get_service_data(srv));
}
static struct pcie_port_service_driver pcie_pme_driver = {
.name = "pcie_pme",
.port_type = PCI_EXP_TYPE_ROOT_PORT,
.service = PCIE_PORT_SERVICE_PME,
.probe = pcie_pme_probe,
.suspend = pcie_pme_suspend,
.resume = pcie_pme_resume,
.remove = pcie_pme_remove,
};
/**
* pcie_pme_service_init - Register the PCIe PME service driver.
*/
static int __init pcie_pme_service_init(void)
{
return pcie_port_service_register(&pcie_pme_driver);
}
module_init(pcie_pme_service_init);