blob: 60f9cfcac93ff83e36c730eb555a5c65a066a12b [file] [log] [blame]
/*
* acerhdf - A driver which monitors the temperature
* of the aspire one netbook, turns on/off the fan
* as soon as the upper/lower threshold is reached.
*
* (C) 2009 - Peter Feuerer peter (a) piie.net
* http://piie.net
* 2009 Borislav Petkov <petkovbb@gmail.com>
*
* Inspired by and many thanks to:
* o acerfand - Rachel Greenham
* o acer_ec.pl - Michael Kurz michi.kurz (at) googlemail.com
* - Petr Tomasek tomasek (#) etf,cuni,cz
* - Carlos Corbacho cathectic (at) gmail.com
* o lkml - Matthew Garrett
* - Borislav Petkov
* - Andreas Mohr
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define pr_fmt(fmt) "acerhdf: " fmt
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/dmi.h>
#include <acpi/acpi_drivers.h>
#include <linux/sched.h>
#include <linux/thermal.h>
#include <linux/platform_device.h>
/*
* The driver is started with "kernel mode off" by default. That means, the BIOS
* is still in control of the fan. In this mode the driver allows to read the
* temperature of the cpu and a userspace tool may take over control of the fan.
* If the driver is switched to "kernel mode" (e.g. via module parameter) the
* driver is in full control of the fan. If you want the module to be started in
* kernel mode by default, define the following:
*/
#undef START_IN_KERNEL_MODE
#define DRV_VER "0.5.24"
/*
* According to the Atom N270 datasheet,
* (http://download.intel.com/design/processor/datashts/320032.pdf) the
* CPU's optimal operating limits denoted in junction temperature as
* measured by the on-die thermal monitor are within 0 <= Tj <= 90. So,
* assume 89°C is critical temperature.
*/
#define ACERHDF_TEMP_CRIT 89000
#define ACERHDF_FAN_OFF 0
#define ACERHDF_FAN_AUTO 1
/*
* No matter what value the user puts into the fanon variable, turn on the fan
* at 80 degree Celsius to prevent hardware damage
*/
#define ACERHDF_MAX_FANON 80000
/*
* Maximum interval between two temperature checks is 15 seconds, as the die
* can get hot really fast under heavy load (plus we shouldn't forget about
* possible impact of _external_ aggressive sources such as heaters, sun etc.)
*/
#define ACERHDF_MAX_INTERVAL 15
#ifdef START_IN_KERNEL_MODE
static int kernelmode = 1;
#else
static int kernelmode;
#endif
static unsigned int interval = 10;
static unsigned int fanon = 63000;
static unsigned int fanoff = 58000;
static unsigned int verbose;
static unsigned int fanstate = ACERHDF_FAN_AUTO;
static char force_bios[16];
static char force_product[16];
static unsigned int prev_interval;
static struct thermal_zone_device *thz_dev;
static struct thermal_cooling_device *cl_dev;
static struct platform_device *acerhdf_dev;
module_param(kernelmode, uint, 0);
MODULE_PARM_DESC(kernelmode, "Kernel mode fan control on / off");
module_param(interval, uint, 0600);
MODULE_PARM_DESC(interval, "Polling interval of temperature check");
module_param(fanon, uint, 0600);
MODULE_PARM_DESC(fanon, "Turn the fan on above this temperature");
module_param(fanoff, uint, 0600);
MODULE_PARM_DESC(fanoff, "Turn the fan off below this temperature");
module_param(verbose, uint, 0600);
MODULE_PARM_DESC(verbose, "Enable verbose dmesg output");
module_param_string(force_bios, force_bios, 16, 0);
MODULE_PARM_DESC(force_bios, "Force BIOS version and omit BIOS check");
module_param_string(force_product, force_product, 16, 0);
MODULE_PARM_DESC(force_product, "Force BIOS product and omit BIOS check");
/*
* cmd_off: to switch the fan completely off and check if the fan is off
* cmd_auto: to set the BIOS in control of the fan. The BIOS regulates then
* the fan speed depending on the temperature
*/
struct fancmd {
u8 cmd_off;
u8 cmd_auto;
};
/* BIOS settings */
struct bios_settings_t {
const char *vendor;
const char *product;
const char *version;
unsigned char fanreg;
unsigned char tempreg;
struct fancmd cmd;
};
/* Register addresses and values for different BIOS versions */
static const struct bios_settings_t bios_tbl[] = {
/* AOA110 */
{"Acer", "AOA110", "v0.3109", 0x55, 0x58, {0x1f, 0x00} },
{"Acer", "AOA110", "v0.3114", 0x55, 0x58, {0x1f, 0x00} },
{"Acer", "AOA110", "v0.3301", 0x55, 0x58, {0xaf, 0x00} },
{"Acer", "AOA110", "v0.3304", 0x55, 0x58, {0xaf, 0x00} },
{"Acer", "AOA110", "v0.3305", 0x55, 0x58, {0xaf, 0x00} },
{"Acer", "AOA110", "v0.3307", 0x55, 0x58, {0xaf, 0x00} },
{"Acer", "AOA110", "v0.3308", 0x55, 0x58, {0x21, 0x00} },
{"Acer", "AOA110", "v0.3309", 0x55, 0x58, {0x21, 0x00} },
{"Acer", "AOA110", "v0.3310", 0x55, 0x58, {0x21, 0x00} },
/* AOA150 */
{"Acer", "AOA150", "v0.3114", 0x55, 0x58, {0x1f, 0x00} },
{"Acer", "AOA150", "v0.3301", 0x55, 0x58, {0x20, 0x00} },
{"Acer", "AOA150", "v0.3304", 0x55, 0x58, {0x20, 0x00} },
{"Acer", "AOA150", "v0.3305", 0x55, 0x58, {0x20, 0x00} },
{"Acer", "AOA150", "v0.3307", 0x55, 0x58, {0x20, 0x00} },
{"Acer", "AOA150", "v0.3308", 0x55, 0x58, {0x20, 0x00} },
{"Acer", "AOA150", "v0.3309", 0x55, 0x58, {0x20, 0x00} },
{"Acer", "AOA150", "v0.3310", 0x55, 0x58, {0x20, 0x00} },
/* Acer 1410 */
{"Acer", "Aspire 1410", "v0.3108", 0x55, 0x58, {0x9e, 0x00} },
{"Acer", "Aspire 1410", "v0.3113", 0x55, 0x58, {0x9e, 0x00} },
{"Acer", "Aspire 1410", "v0.3115", 0x55, 0x58, {0x9e, 0x00} },
{"Acer", "Aspire 1410", "v0.3117", 0x55, 0x58, {0x9e, 0x00} },
{"Acer", "Aspire 1410", "v0.3119", 0x55, 0x58, {0x9e, 0x00} },
{"Acer", "Aspire 1410", "v0.3120", 0x55, 0x58, {0x9e, 0x00} },
{"Acer", "Aspire 1410", "v1.3204", 0x55, 0x58, {0x9e, 0x00} },
{"Acer", "Aspire 1410", "v1.3303", 0x55, 0x58, {0x9e, 0x00} },
{"Acer", "Aspire 1410", "v1.3308", 0x55, 0x58, {0x9e, 0x00} },
{"Acer", "Aspire 1410", "v1.3310", 0x55, 0x58, {0x9e, 0x00} },
/* Acer 1810xx */
{"Acer", "Aspire 1810TZ", "v0.3108", 0x55, 0x58, {0x9e, 0x00} },
{"Acer", "Aspire 1810T", "v0.3108", 0x55, 0x58, {0x9e, 0x00} },
{"Acer", "Aspire 1810TZ", "v0.3113", 0x55, 0x58, {0x9e, 0x00} },
{"Acer", "Aspire 1810T", "v0.3113", 0x55, 0x58, {0x9e, 0x00} },
{"Acer", "Aspire 1810TZ", "v0.3115", 0x55, 0x58, {0x9e, 0x00} },
{"Acer", "Aspire 1810T", "v0.3115", 0x55, 0x58, {0x9e, 0x00} },
{"Acer", "Aspire 1810TZ", "v0.3117", 0x55, 0x58, {0x9e, 0x00} },
{"Acer", "Aspire 1810T", "v0.3117", 0x55, 0x58, {0x9e, 0x00} },
{"Acer", "Aspire 1810TZ", "v0.3119", 0x55, 0x58, {0x9e, 0x00} },
{"Acer", "Aspire 1810T", "v0.3119", 0x55, 0x58, {0x9e, 0x00} },
{"Acer", "Aspire 1810TZ", "v0.3120", 0x55, 0x58, {0x9e, 0x00} },
{"Acer", "Aspire 1810T", "v0.3120", 0x55, 0x58, {0x9e, 0x00} },
{"Acer", "Aspire 1810TZ", "v1.3204", 0x55, 0x58, {0x9e, 0x00} },
{"Acer", "Aspire 1810T", "v1.3204", 0x55, 0x58, {0x9e, 0x00} },
{"Acer", "Aspire 1810TZ", "v1.3303", 0x55, 0x58, {0x9e, 0x00} },
{"Acer", "Aspire 1810T", "v1.3303", 0x55, 0x58, {0x9e, 0x00} },
{"Acer", "Aspire 1810TZ", "v1.3308", 0x55, 0x58, {0x9e, 0x00} },
{"Acer", "Aspire 1810T", "v1.3308", 0x55, 0x58, {0x9e, 0x00} },
{"Acer", "Aspire 1810TZ", "v1.3310", 0x55, 0x58, {0x9e, 0x00} },
{"Acer", "Aspire 1810T", "v1.3310", 0x55, 0x58, {0x9e, 0x00} },
/* Acer 531 */
{"Acer", "AO531h", "v0.3201", 0x55, 0x58, {0x20, 0x00} },
/* Gateway */
{"Gateway", "AOA110", "v0.3103", 0x55, 0x58, {0x21, 0x00} },
{"Gateway", "AOA150", "v0.3103", 0x55, 0x58, {0x20, 0x00} },
{"Gateway", "LT31", "v1.3103", 0x55, 0x58, {0x9e, 0x00} },
{"Gateway", "LT31", "v1.3201", 0x55, 0x58, {0x9e, 0x00} },
{"Gateway", "LT31", "v1.3302", 0x55, 0x58, {0x9e, 0x00} },
/* Packard Bell */
{"Packard Bell", "DOA150", "v0.3104", 0x55, 0x58, {0x21, 0x00} },
{"Packard Bell", "DOA150", "v0.3105", 0x55, 0x58, {0x20, 0x00} },
{"Packard Bell", "AOA110", "v0.3105", 0x55, 0x58, {0x21, 0x00} },
{"Packard Bell", "AOA150", "v0.3105", 0x55, 0x58, {0x20, 0x00} },
{"Packard Bell", "DOTMU", "v1.3303", 0x55, 0x58, {0x9e, 0x00} },
{"Packard Bell", "DOTMU", "v0.3120", 0x55, 0x58, {0x9e, 0x00} },
{"Packard Bell", "DOTMU", "v0.3108", 0x55, 0x58, {0x9e, 0x00} },
{"Packard Bell", "DOTMU", "v0.3113", 0x55, 0x58, {0x9e, 0x00} },
{"Packard Bell", "DOTMU", "v0.3115", 0x55, 0x58, {0x9e, 0x00} },
{"Packard Bell", "DOTMU", "v0.3117", 0x55, 0x58, {0x9e, 0x00} },
{"Packard Bell", "DOTMU", "v0.3119", 0x55, 0x58, {0x9e, 0x00} },
{"Packard Bell", "DOTMU", "v1.3204", 0x55, 0x58, {0x9e, 0x00} },
{"Packard Bell", "DOTMA", "v1.3201", 0x55, 0x58, {0x9e, 0x00} },
{"Packard Bell", "DOTMA", "v1.3302", 0x55, 0x58, {0x9e, 0x00} },
/* pewpew-terminator */
{"", "", "", 0, 0, {0, 0} }
};
static const struct bios_settings_t *bios_cfg __read_mostly;
static int acerhdf_get_temp(int *temp)
{
u8 read_temp;
if (ec_read(bios_cfg->tempreg, &read_temp))
return -EINVAL;
*temp = read_temp * 1000;
return 0;
}
static int acerhdf_get_fanstate(int *state)
{
u8 fan;
if (ec_read(bios_cfg->fanreg, &fan))
return -EINVAL;
if (fan != bios_cfg->cmd.cmd_off)
*state = ACERHDF_FAN_AUTO;
else
*state = ACERHDF_FAN_OFF;
return 0;
}
static void acerhdf_change_fanstate(int state)
{
unsigned char cmd;
if (verbose)
pr_notice("fan %s\n", (state == ACERHDF_FAN_OFF) ?
"OFF" : "ON");
if ((state != ACERHDF_FAN_OFF) && (state != ACERHDF_FAN_AUTO)) {
pr_err("invalid fan state %d requested, setting to auto!\n",
state);
state = ACERHDF_FAN_AUTO;
}
cmd = (state == ACERHDF_FAN_OFF) ? bios_cfg->cmd.cmd_off
: bios_cfg->cmd.cmd_auto;
fanstate = state;
ec_write(bios_cfg->fanreg, cmd);
}
static void acerhdf_check_param(struct thermal_zone_device *thermal)
{
if (fanon > ACERHDF_MAX_FANON) {
pr_err("fanon temperature too high, set to %d\n",
ACERHDF_MAX_FANON);
fanon = ACERHDF_MAX_FANON;
}
if (kernelmode && prev_interval != interval) {
if (interval > ACERHDF_MAX_INTERVAL) {
pr_err("interval too high, set to %d\n",
ACERHDF_MAX_INTERVAL);
interval = ACERHDF_MAX_INTERVAL;
}
if (verbose)
pr_notice("interval changed to: %d\n",
interval);
thermal->polling_delay = interval*1000;
prev_interval = interval;
}
}
/*
* This is the thermal zone callback which does the delayed polling of the fan
* state. We do check /sysfs-originating settings here in acerhdf_check_param()
* as late as the polling interval is since we can't do that in the respective
* accessors of the module parameters.
*/
static int acerhdf_get_ec_temp(struct thermal_zone_device *thermal,
unsigned long *t)
{
int temp, err = 0;
acerhdf_check_param(thermal);
err = acerhdf_get_temp(&temp);
if (err)
return err;
if (verbose)
pr_notice("temp %d\n", temp);
*t = temp;
return 0;
}
static int acerhdf_bind(struct thermal_zone_device *thermal,
struct thermal_cooling_device *cdev)
{
/* if the cooling device is the one from acerhdf bind it */
if (cdev != cl_dev)
return 0;
if (thermal_zone_bind_cooling_device(thermal, 0, cdev)) {
pr_err("error binding cooling dev\n");
return -EINVAL;
}
return 0;
}
static int acerhdf_unbind(struct thermal_zone_device *thermal,
struct thermal_cooling_device *cdev)
{
if (cdev != cl_dev)
return 0;
if (thermal_zone_unbind_cooling_device(thermal, 0, cdev)) {
pr_err("error unbinding cooling dev\n");
return -EINVAL;
}
return 0;
}
static inline void acerhdf_revert_to_bios_mode(void)
{
acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
kernelmode = 0;
if (thz_dev)
thz_dev->polling_delay = 0;
pr_notice("kernel mode fan control OFF\n");
}
static inline void acerhdf_enable_kernelmode(void)
{
kernelmode = 1;
thz_dev->polling_delay = interval*1000;
thermal_zone_device_update(thz_dev);
pr_notice("kernel mode fan control ON\n");
}
static int acerhdf_get_mode(struct thermal_zone_device *thermal,
enum thermal_device_mode *mode)
{
if (verbose)
pr_notice("kernel mode fan control %d\n", kernelmode);
*mode = (kernelmode) ? THERMAL_DEVICE_ENABLED
: THERMAL_DEVICE_DISABLED;
return 0;
}
/*
* set operation mode;
* enabled: the thermal layer of the kernel takes care about
* the temperature and the fan.
* disabled: the BIOS takes control of the fan.
*/
static int acerhdf_set_mode(struct thermal_zone_device *thermal,
enum thermal_device_mode mode)
{
if (mode == THERMAL_DEVICE_DISABLED && kernelmode)
acerhdf_revert_to_bios_mode();
else if (mode == THERMAL_DEVICE_ENABLED && !kernelmode)
acerhdf_enable_kernelmode();
return 0;
}
static int acerhdf_get_trip_type(struct thermal_zone_device *thermal, int trip,
enum thermal_trip_type *type)
{
if (trip == 0)
*type = THERMAL_TRIP_ACTIVE;
return 0;
}
static int acerhdf_get_trip_temp(struct thermal_zone_device *thermal, int trip,
unsigned long *temp)
{
if (trip == 0)
*temp = fanon;
return 0;
}
static int acerhdf_get_crit_temp(struct thermal_zone_device *thermal,
unsigned long *temperature)
{
*temperature = ACERHDF_TEMP_CRIT;
return 0;
}
/* bind callback functions to thermalzone */
static struct thermal_zone_device_ops acerhdf_dev_ops = {
.bind = acerhdf_bind,
.unbind = acerhdf_unbind,
.get_temp = acerhdf_get_ec_temp,
.get_mode = acerhdf_get_mode,
.set_mode = acerhdf_set_mode,
.get_trip_type = acerhdf_get_trip_type,
.get_trip_temp = acerhdf_get_trip_temp,
.get_crit_temp = acerhdf_get_crit_temp,
};
/*
* cooling device callback functions
* get maximal fan cooling state
*/
static int acerhdf_get_max_state(struct thermal_cooling_device *cdev,
unsigned long *state)
{
*state = 1;
return 0;
}
static int acerhdf_get_cur_state(struct thermal_cooling_device *cdev,
unsigned long *state)
{
int err = 0, tmp;
err = acerhdf_get_fanstate(&tmp);
if (err)
return err;
*state = (tmp == ACERHDF_FAN_AUTO) ? 1 : 0;
return 0;
}
/* change current fan state - is overwritten when running in kernel mode */
static int acerhdf_set_cur_state(struct thermal_cooling_device *cdev,
unsigned long state)
{
int cur_temp, cur_state, err = 0;
if (!kernelmode)
return 0;
err = acerhdf_get_temp(&cur_temp);
if (err) {
pr_err("error reading temperature, hand off control to BIOS\n");
goto err_out;
}
err = acerhdf_get_fanstate(&cur_state);
if (err) {
pr_err("error reading fan state, hand off control to BIOS\n");
goto err_out;
}
if (state == 0) {
/* turn fan off only if below fanoff temperature */
if ((cur_state == ACERHDF_FAN_AUTO) &&
(cur_temp < fanoff))
acerhdf_change_fanstate(ACERHDF_FAN_OFF);
} else {
if (cur_state == ACERHDF_FAN_OFF)
acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
}
return 0;
err_out:
acerhdf_revert_to_bios_mode();
return -EINVAL;
}
/* bind fan callbacks to fan device */
static struct thermal_cooling_device_ops acerhdf_cooling_ops = {
.get_max_state = acerhdf_get_max_state,
.get_cur_state = acerhdf_get_cur_state,
.set_cur_state = acerhdf_set_cur_state,
};
/* suspend / resume functionality */
static int acerhdf_suspend(struct device *dev)
{
if (kernelmode)
acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
if (verbose)
pr_notice("going suspend\n");
return 0;
}
static int __devinit acerhdf_probe(struct platform_device *device)
{
return 0;
}
static int acerhdf_remove(struct platform_device *device)
{
return 0;
}
static const struct dev_pm_ops acerhdf_pm_ops = {
.suspend = acerhdf_suspend,
.freeze = acerhdf_suspend,
};
static struct platform_driver acerhdf_driver = {
.driver = {
.name = "acerhdf",
.owner = THIS_MODULE,
.pm = &acerhdf_pm_ops,
},
.probe = acerhdf_probe,
.remove = acerhdf_remove,
};
/* checks if str begins with start */
static int str_starts_with(const char *str, const char *start)
{
unsigned long str_len = 0, start_len = 0;
str_len = strlen(str);
start_len = strlen(start);
if (str_len >= start_len &&
!strncmp(str, start, start_len))
return 1;
return 0;
}
/* check hardware */
static int acerhdf_check_hardware(void)
{
char const *vendor, *version, *product;
const struct bios_settings_t *bt = NULL;
/* get BIOS data */
vendor = dmi_get_system_info(DMI_SYS_VENDOR);
version = dmi_get_system_info(DMI_BIOS_VERSION);
product = dmi_get_system_info(DMI_PRODUCT_NAME);
if (!vendor || !version || !product) {
pr_err("error getting hardware information\n");
return -EINVAL;
}
pr_info("Acer Aspire One Fan driver, v.%s\n", DRV_VER);
if (force_bios[0]) {
version = force_bios;
pr_info("forcing BIOS version: %s\n", version);
kernelmode = 0;
}
if (force_product[0]) {
product = force_product;
pr_info("forcing BIOS product: %s\n", product);
kernelmode = 0;
}
if (verbose)
pr_info("BIOS info: %s %s, product: %s\n",
vendor, version, product);
/* search BIOS version and vendor in BIOS settings table */
for (bt = bios_tbl; bt->vendor[0]; bt++) {
/*
* check if actual hardware BIOS vendor, product and version
* IDs start with the strings of BIOS table entry
*/
if (str_starts_with(vendor, bt->vendor) &&
str_starts_with(product, bt->product) &&
str_starts_with(version, bt->version)) {
bios_cfg = bt;
break;
}
}
if (!bios_cfg) {
pr_err("unknown (unsupported) BIOS version %s/%s/%s, "
"please report, aborting!\n", vendor, product, version);
return -EINVAL;
}
/*
* if started with kernel mode off, prevent the kernel from switching
* off the fan
*/
if (!kernelmode) {
pr_notice("Fan control off, to enable do:\n");
pr_notice("echo -n \"enabled\" > "
"/sys/class/thermal/thermal_zone0/mode\n");
}
return 0;
}
static int acerhdf_register_platform(void)
{
int err = 0;
err = platform_driver_register(&acerhdf_driver);
if (err)
return err;
acerhdf_dev = platform_device_alloc("acerhdf", -1);
if (!acerhdf_dev) {
err = -ENOMEM;
goto err_device_alloc;
}
err = platform_device_add(acerhdf_dev);
if (err)
goto err_device_add;
return 0;
err_device_add:
platform_device_put(acerhdf_dev);
err_device_alloc:
platform_driver_unregister(&acerhdf_driver);
return err;
}
static void acerhdf_unregister_platform(void)
{
platform_device_unregister(acerhdf_dev);
platform_driver_unregister(&acerhdf_driver);
}
static int acerhdf_register_thermal(void)
{
cl_dev = thermal_cooling_device_register("acerhdf-fan", NULL,
&acerhdf_cooling_ops);
if (IS_ERR(cl_dev))
return -EINVAL;
thz_dev = thermal_zone_device_register("acerhdf", 1, NULL,
&acerhdf_dev_ops, 0, 0, 0,
(kernelmode) ? interval*1000 : 0);
if (IS_ERR(thz_dev))
return -EINVAL;
return 0;
}
static void acerhdf_unregister_thermal(void)
{
if (cl_dev) {
thermal_cooling_device_unregister(cl_dev);
cl_dev = NULL;
}
if (thz_dev) {
thermal_zone_device_unregister(thz_dev);
thz_dev = NULL;
}
}
static int __init acerhdf_init(void)
{
int err = 0;
err = acerhdf_check_hardware();
if (err)
goto out_err;
err = acerhdf_register_platform();
if (err)
goto out_err;
err = acerhdf_register_thermal();
if (err)
goto err_unreg;
return 0;
err_unreg:
acerhdf_unregister_thermal();
acerhdf_unregister_platform();
out_err:
return err;
}
static void __exit acerhdf_exit(void)
{
acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
acerhdf_unregister_thermal();
acerhdf_unregister_platform();
}
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Peter Feuerer");
MODULE_DESCRIPTION("Aspire One temperature and fan driver");
MODULE_ALIAS("dmi:*:*Acer*:pnAOA*:");
MODULE_ALIAS("dmi:*:*Acer*:pnAspire 1410*:");
MODULE_ALIAS("dmi:*:*Acer*:pnAspire 1810*:");
MODULE_ALIAS("dmi:*:*Acer*:pnAO531*:");
MODULE_ALIAS("dmi:*:*Gateway*:pnAOA*:");
MODULE_ALIAS("dmi:*:*Gateway*:pnLT31*:");
MODULE_ALIAS("dmi:*:*Packard Bell*:pnAOA*:");
MODULE_ALIAS("dmi:*:*Packard Bell*:pnDOA*:");
MODULE_ALIAS("dmi:*:*Packard Bell*:pnDOTMU*:");
MODULE_ALIAS("dmi:*:*Packard Bell*:pnDOTMA*:");
module_init(acerhdf_init);
module_exit(acerhdf_exit);