| //------------------------------------------------------------------------------ |
| // <copyright file="ar6k.c" company="Atheros"> |
| // Copyright (c) 2007-2010 Atheros Corporation. All rights reserved. |
| // |
| // |
| // Permission to use, copy, modify, and/or distribute this software for any |
| // purpose with or without fee is hereby granted, provided that the above |
| // copyright notice and this permission notice appear in all copies. |
| // |
| // THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| // WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| // MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| // ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| // WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| // ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| // OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| // |
| // |
| //------------------------------------------------------------------------------ |
| //============================================================================== |
| // AR6K device layer that handles register level I/O |
| // |
| // Author(s): ="Atheros" |
| //============================================================================== |
| |
| #include "a_config.h" |
| #include "athdefs.h" |
| #include "a_types.h" |
| #include "AR6002/hw2.0/hw/mbox_host_reg.h" |
| #include "a_osapi.h" |
| #include "../htc_debug.h" |
| #include "hif.h" |
| #include "htc_packet.h" |
| #include "ar6k.h" |
| |
| #define MAILBOX_FOR_BLOCK_SIZE 1 |
| |
| A_STATUS DevEnableInterrupts(AR6K_DEVICE *pDev); |
| A_STATUS DevDisableInterrupts(AR6K_DEVICE *pDev); |
| |
| static void DevCleanupVirtualScatterSupport(AR6K_DEVICE *pDev); |
| |
| void AR6KFreeIOPacket(AR6K_DEVICE *pDev, HTC_PACKET *pPacket) |
| { |
| LOCK_AR6K(pDev); |
| HTC_PACKET_ENQUEUE(&pDev->RegisterIOList,pPacket); |
| UNLOCK_AR6K(pDev); |
| } |
| |
| HTC_PACKET *AR6KAllocIOPacket(AR6K_DEVICE *pDev) |
| { |
| HTC_PACKET *pPacket; |
| |
| LOCK_AR6K(pDev); |
| pPacket = HTC_PACKET_DEQUEUE(&pDev->RegisterIOList); |
| UNLOCK_AR6K(pDev); |
| |
| return pPacket; |
| } |
| |
| void DevCleanup(AR6K_DEVICE *pDev) |
| { |
| DevCleanupGMbox(pDev); |
| |
| if (pDev->HifAttached) { |
| HIFDetachHTC(pDev->HIFDevice); |
| pDev->HifAttached = FALSE; |
| } |
| |
| DevCleanupVirtualScatterSupport(pDev); |
| |
| if (A_IS_MUTEX_VALID(&pDev->Lock)) { |
| A_MUTEX_DELETE(&pDev->Lock); |
| } |
| } |
| |
| A_STATUS DevSetup(AR6K_DEVICE *pDev) |
| { |
| A_UINT32 blocksizes[AR6K_MAILBOXES]; |
| A_STATUS status = A_OK; |
| int i; |
| HTC_CALLBACKS htcCallbacks; |
| |
| do { |
| |
| DL_LIST_INIT(&pDev->ScatterReqHead); |
| /* initialize our free list of IO packets */ |
| INIT_HTC_PACKET_QUEUE(&pDev->RegisterIOList); |
| A_MUTEX_INIT(&pDev->Lock); |
| |
| A_MEMZERO(&htcCallbacks, sizeof(HTC_CALLBACKS)); |
| /* the device layer handles these */ |
| htcCallbacks.rwCompletionHandler = DevRWCompletionHandler; |
| htcCallbacks.dsrHandler = DevDsrHandler; |
| htcCallbacks.context = pDev; |
| |
| status = HIFAttachHTC(pDev->HIFDevice, &htcCallbacks); |
| |
| if (A_FAILED(status)) { |
| break; |
| } |
| |
| pDev->HifAttached = TRUE; |
| |
| /* get the addresses for all 4 mailboxes */ |
| status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_ADDR, |
| &pDev->MailBoxInfo, sizeof(pDev->MailBoxInfo)); |
| |
| if (status != A_OK) { |
| A_ASSERT(FALSE); |
| break; |
| } |
| |
| /* carve up register I/O packets (these are for ASYNC register I/O ) */ |
| for (i = 0; i < AR6K_MAX_REG_IO_BUFFERS; i++) { |
| HTC_PACKET *pIOPacket; |
| pIOPacket = &pDev->RegIOBuffers[i].HtcPacket; |
| SET_HTC_PACKET_INFO_RX_REFILL(pIOPacket, |
| pDev, |
| pDev->RegIOBuffers[i].Buffer, |
| AR6K_REG_IO_BUFFER_SIZE, |
| 0); /* don't care */ |
| AR6KFreeIOPacket(pDev,pIOPacket); |
| } |
| |
| /* get the block sizes */ |
| status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_BLOCK_SIZE, |
| blocksizes, sizeof(blocksizes)); |
| |
| if (status != A_OK) { |
| A_ASSERT(FALSE); |
| break; |
| } |
| |
| /* note: we actually get the block size of a mailbox other than 0, for SDIO the block |
| * size on mailbox 0 is artificially set to 1. So we use the block size that is set |
| * for the other 3 mailboxes */ |
| pDev->BlockSize = blocksizes[MAILBOX_FOR_BLOCK_SIZE]; |
| /* must be a power of 2 */ |
| A_ASSERT((pDev->BlockSize & (pDev->BlockSize - 1)) == 0); |
| |
| /* assemble mask, used for padding to a block */ |
| pDev->BlockMask = pDev->BlockSize - 1; |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("BlockSize: %d, MailboxAddress:0x%X \n", |
| pDev->BlockSize, pDev->MailBoxInfo.MboxAddresses[HTC_MAILBOX])); |
| |
| pDev->GetPendingEventsFunc = NULL; |
| /* see if the HIF layer implements the get pending events function */ |
| HIFConfigureDevice(pDev->HIFDevice, |
| HIF_DEVICE_GET_PENDING_EVENTS_FUNC, |
| &pDev->GetPendingEventsFunc, |
| sizeof(pDev->GetPendingEventsFunc)); |
| |
| /* assume we can process HIF interrupt events asynchronously */ |
| pDev->HifIRQProcessingMode = HIF_DEVICE_IRQ_ASYNC_SYNC; |
| |
| /* see if the HIF layer overrides this assumption */ |
| HIFConfigureDevice(pDev->HIFDevice, |
| HIF_DEVICE_GET_IRQ_PROC_MODE, |
| &pDev->HifIRQProcessingMode, |
| sizeof(pDev->HifIRQProcessingMode)); |
| |
| switch (pDev->HifIRQProcessingMode) { |
| case HIF_DEVICE_IRQ_SYNC_ONLY: |
| AR_DEBUG_PRINTF(ATH_DEBUG_WARN,("HIF Interrupt processing is SYNC ONLY\n")); |
| /* see if HIF layer wants HTC to yield */ |
| HIFConfigureDevice(pDev->HIFDevice, |
| HIF_DEVICE_GET_IRQ_YIELD_PARAMS, |
| &pDev->HifIRQYieldParams, |
| sizeof(pDev->HifIRQYieldParams)); |
| |
| if (pDev->HifIRQYieldParams.RecvPacketYieldCount > 0) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_WARN, |
| ("HIF requests that DSR yield per %d RECV packets \n", |
| pDev->HifIRQYieldParams.RecvPacketYieldCount)); |
| pDev->DSRCanYield = TRUE; |
| } |
| break; |
| case HIF_DEVICE_IRQ_ASYNC_SYNC: |
| AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("HIF Interrupt processing is ASYNC and SYNC\n")); |
| break; |
| default: |
| A_ASSERT(FALSE); |
| } |
| |
| pDev->HifMaskUmaskRecvEvent = NULL; |
| |
| /* see if the HIF layer implements the mask/unmask recv events function */ |
| HIFConfigureDevice(pDev->HIFDevice, |
| HIF_DEVICE_GET_RECV_EVENT_MASK_UNMASK_FUNC, |
| &pDev->HifMaskUmaskRecvEvent, |
| sizeof(pDev->HifMaskUmaskRecvEvent)); |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("HIF special overrides : 0x%lX , 0x%lX\n", |
| (unsigned long)pDev->GetPendingEventsFunc, (unsigned long)pDev->HifMaskUmaskRecvEvent)); |
| |
| status = DevDisableInterrupts(pDev); |
| |
| if (A_FAILED(status)) { |
| break; |
| } |
| |
| status = DevSetupGMbox(pDev); |
| |
| } while (FALSE); |
| |
| if (A_FAILED(status)) { |
| if (pDev->HifAttached) { |
| HIFDetachHTC(pDev->HIFDevice); |
| pDev->HifAttached = FALSE; |
| } |
| } |
| |
| return status; |
| |
| } |
| |
| A_STATUS DevEnableInterrupts(AR6K_DEVICE *pDev) |
| { |
| A_STATUS status; |
| AR6K_IRQ_ENABLE_REGISTERS regs; |
| |
| LOCK_AR6K(pDev); |
| |
| /* Enable all the interrupts except for the internal AR6000 CPU interrupt */ |
| pDev->IrqEnableRegisters.int_status_enable = INT_STATUS_ENABLE_ERROR_SET(0x01) | |
| INT_STATUS_ENABLE_CPU_SET(0x01) | |
| INT_STATUS_ENABLE_COUNTER_SET(0x01); |
| |
| if (NULL == pDev->GetPendingEventsFunc) { |
| pDev->IrqEnableRegisters.int_status_enable |= INT_STATUS_ENABLE_MBOX_DATA_SET(0x01); |
| } else { |
| /* The HIF layer provided us with a pending events function which means that |
| * the detection of pending mbox messages is handled in the HIF layer. |
| * This is the case for the SPI2 interface. |
| * In the normal case we enable MBOX interrupts, for the case |
| * with HIFs that offer this mechanism, we keep these interrupts |
| * masked */ |
| pDev->IrqEnableRegisters.int_status_enable &= ~INT_STATUS_ENABLE_MBOX_DATA_SET(0x01); |
| } |
| |
| |
| /* Set up the CPU Interrupt Status Register */ |
| pDev->IrqEnableRegisters.cpu_int_status_enable = CPU_INT_STATUS_ENABLE_BIT_SET(0x00); |
| |
| /* Set up the Error Interrupt Status Register */ |
| pDev->IrqEnableRegisters.error_status_enable = |
| ERROR_STATUS_ENABLE_RX_UNDERFLOW_SET(0x01) | |
| ERROR_STATUS_ENABLE_TX_OVERFLOW_SET(0x01); |
| |
| /* Set up the Counter Interrupt Status Register (only for debug interrupt to catch fatal errors) */ |
| pDev->IrqEnableRegisters.counter_int_status_enable = |
| COUNTER_INT_STATUS_ENABLE_BIT_SET(AR6K_TARGET_DEBUG_INTR_MASK); |
| |
| /* copy into our temp area */ |
| A_MEMCPY(®s,&pDev->IrqEnableRegisters,AR6K_IRQ_ENABLE_REGS_SIZE); |
| |
| UNLOCK_AR6K(pDev); |
| |
| /* always synchronous */ |
| status = HIFReadWrite(pDev->HIFDevice, |
| INT_STATUS_ENABLE_ADDRESS, |
| ®s.int_status_enable, |
| AR6K_IRQ_ENABLE_REGS_SIZE, |
| HIF_WR_SYNC_BYTE_INC, |
| NULL); |
| |
| if (status != A_OK) { |
| /* Can't write it for some reason */ |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, |
| ("Failed to update interrupt control registers err: %d\n", status)); |
| |
| } |
| |
| return status; |
| } |
| |
| A_STATUS DevDisableInterrupts(AR6K_DEVICE *pDev) |
| { |
| AR6K_IRQ_ENABLE_REGISTERS regs; |
| |
| LOCK_AR6K(pDev); |
| /* Disable all interrupts */ |
| pDev->IrqEnableRegisters.int_status_enable = 0; |
| pDev->IrqEnableRegisters.cpu_int_status_enable = 0; |
| pDev->IrqEnableRegisters.error_status_enable = 0; |
| pDev->IrqEnableRegisters.counter_int_status_enable = 0; |
| /* copy into our temp area */ |
| A_MEMCPY(®s,&pDev->IrqEnableRegisters,AR6K_IRQ_ENABLE_REGS_SIZE); |
| |
| UNLOCK_AR6K(pDev); |
| |
| /* always synchronous */ |
| return HIFReadWrite(pDev->HIFDevice, |
| INT_STATUS_ENABLE_ADDRESS, |
| ®s.int_status_enable, |
| AR6K_IRQ_ENABLE_REGS_SIZE, |
| HIF_WR_SYNC_BYTE_INC, |
| NULL); |
| } |
| |
| /* enable device interrupts */ |
| A_STATUS DevUnmaskInterrupts(AR6K_DEVICE *pDev) |
| { |
| /* for good measure, make sure interrupt are disabled before unmasking at the HIF |
| * layer. |
| * The rationale here is that between device insertion (where we clear the interrupts the first time) |
| * and when HTC is finally ready to handle interrupts, other software can perform target "soft" resets. |
| * The AR6K interrupt enables reset back to an "enabled" state when this happens. |
| * */ |
| A_STATUS IntStatus = A_OK; |
| DevDisableInterrupts(pDev); |
| |
| #ifdef THREAD_X |
| // Tobe verified... |
| IntStatus = DevEnableInterrupts(pDev); |
| /* Unmask the host controller interrupts */ |
| HIFUnMaskInterrupt(pDev->HIFDevice); |
| #else |
| /* Unmask the host controller interrupts */ |
| HIFUnMaskInterrupt(pDev->HIFDevice); |
| IntStatus = DevEnableInterrupts(pDev); |
| #endif |
| |
| return IntStatus; |
| } |
| |
| /* disable all device interrupts */ |
| A_STATUS DevMaskInterrupts(AR6K_DEVICE *pDev) |
| { |
| /* mask the interrupt at the HIF layer, we don't want a stray interrupt taken while |
| * we zero out our shadow registers in DevDisableInterrupts()*/ |
| HIFMaskInterrupt(pDev->HIFDevice); |
| |
| return DevDisableInterrupts(pDev); |
| } |
| |
| /* callback when our fetch to enable/disable completes */ |
| static void DevDoEnableDisableRecvAsyncHandler(void *Context, HTC_PACKET *pPacket) |
| { |
| AR6K_DEVICE *pDev = (AR6K_DEVICE *)Context; |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+DevDoEnableDisableRecvAsyncHandler: (dev: 0x%lX)\n", (unsigned long)pDev)); |
| |
| if (A_FAILED(pPacket->Status)) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, |
| (" Failed to disable receiver, status:%d \n", pPacket->Status)); |
| } |
| /* free this IO packet */ |
| AR6KFreeIOPacket(pDev,pPacket); |
| AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-DevDoEnableDisableRecvAsyncHandler \n")); |
| } |
| |
| /* disable packet reception (used in case the host runs out of buffers) |
| * this is the "override" method when the HIF reports another methods to |
| * disable recv events */ |
| static A_STATUS DevDoEnableDisableRecvOverride(AR6K_DEVICE *pDev, A_BOOL EnableRecv, A_BOOL AsyncMode) |
| { |
| A_STATUS status = A_OK; |
| HTC_PACKET *pIOPacket = NULL; |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("DevDoEnableDisableRecvOverride: Enable:%d Mode:%d\n", |
| EnableRecv,AsyncMode)); |
| |
| do { |
| |
| if (AsyncMode) { |
| |
| pIOPacket = AR6KAllocIOPacket(pDev); |
| |
| if (NULL == pIOPacket) { |
| status = A_NO_MEMORY; |
| A_ASSERT(FALSE); |
| break; |
| } |
| |
| /* stick in our completion routine when the I/O operation completes */ |
| pIOPacket->Completion = DevDoEnableDisableRecvAsyncHandler; |
| pIOPacket->pContext = pDev; |
| |
| /* call the HIF layer override and do this asynchronously */ |
| status = pDev->HifMaskUmaskRecvEvent(pDev->HIFDevice, |
| EnableRecv ? HIF_UNMASK_RECV : HIF_MASK_RECV, |
| pIOPacket); |
| break; |
| } |
| |
| /* if we get here we are doing it synchronously */ |
| status = pDev->HifMaskUmaskRecvEvent(pDev->HIFDevice, |
| EnableRecv ? HIF_UNMASK_RECV : HIF_MASK_RECV, |
| NULL); |
| |
| } while (FALSE); |
| |
| if (A_FAILED(status) && (pIOPacket != NULL)) { |
| AR6KFreeIOPacket(pDev,pIOPacket); |
| } |
| |
| return status; |
| } |
| |
| /* disable packet reception (used in case the host runs out of buffers) |
| * this is the "normal" method using the interrupt enable registers through |
| * the host I/F */ |
| static A_STATUS DevDoEnableDisableRecvNormal(AR6K_DEVICE *pDev, A_BOOL EnableRecv, A_BOOL AsyncMode) |
| { |
| A_STATUS status = A_OK; |
| HTC_PACKET *pIOPacket = NULL; |
| AR6K_IRQ_ENABLE_REGISTERS regs; |
| |
| /* take the lock to protect interrupt enable shadows */ |
| LOCK_AR6K(pDev); |
| |
| if (EnableRecv) { |
| pDev->IrqEnableRegisters.int_status_enable |= INT_STATUS_ENABLE_MBOX_DATA_SET(0x01); |
| } else { |
| pDev->IrqEnableRegisters.int_status_enable &= ~INT_STATUS_ENABLE_MBOX_DATA_SET(0x01); |
| } |
| |
| /* copy into our temp area */ |
| A_MEMCPY(®s,&pDev->IrqEnableRegisters,AR6K_IRQ_ENABLE_REGS_SIZE); |
| UNLOCK_AR6K(pDev); |
| |
| do { |
| |
| if (AsyncMode) { |
| |
| pIOPacket = AR6KAllocIOPacket(pDev); |
| |
| if (NULL == pIOPacket) { |
| status = A_NO_MEMORY; |
| A_ASSERT(FALSE); |
| break; |
| } |
| |
| /* copy values to write to our async I/O buffer */ |
| A_MEMCPY(pIOPacket->pBuffer,®s,AR6K_IRQ_ENABLE_REGS_SIZE); |
| |
| /* stick in our completion routine when the I/O operation completes */ |
| pIOPacket->Completion = DevDoEnableDisableRecvAsyncHandler; |
| pIOPacket->pContext = pDev; |
| |
| /* write it out asynchronously */ |
| HIFReadWrite(pDev->HIFDevice, |
| INT_STATUS_ENABLE_ADDRESS, |
| pIOPacket->pBuffer, |
| AR6K_IRQ_ENABLE_REGS_SIZE, |
| HIF_WR_ASYNC_BYTE_INC, |
| pIOPacket); |
| break; |
| } |
| |
| /* if we get here we are doing it synchronously */ |
| |
| status = HIFReadWrite(pDev->HIFDevice, |
| INT_STATUS_ENABLE_ADDRESS, |
| ®s.int_status_enable, |
| AR6K_IRQ_ENABLE_REGS_SIZE, |
| HIF_WR_SYNC_BYTE_INC, |
| NULL); |
| |
| } while (FALSE); |
| |
| if (A_FAILED(status) && (pIOPacket != NULL)) { |
| AR6KFreeIOPacket(pDev,pIOPacket); |
| } |
| |
| return status; |
| } |
| |
| |
| A_STATUS DevStopRecv(AR6K_DEVICE *pDev, A_BOOL AsyncMode) |
| { |
| if (NULL == pDev->HifMaskUmaskRecvEvent) { |
| return DevDoEnableDisableRecvNormal(pDev,FALSE,AsyncMode); |
| } else { |
| return DevDoEnableDisableRecvOverride(pDev,FALSE,AsyncMode); |
| } |
| } |
| |
| A_STATUS DevEnableRecv(AR6K_DEVICE *pDev, A_BOOL AsyncMode) |
| { |
| if (NULL == pDev->HifMaskUmaskRecvEvent) { |
| return DevDoEnableDisableRecvNormal(pDev,TRUE,AsyncMode); |
| } else { |
| return DevDoEnableDisableRecvOverride(pDev,TRUE,AsyncMode); |
| } |
| } |
| |
| A_STATUS DevWaitForPendingRecv(AR6K_DEVICE *pDev,A_UINT32 TimeoutInMs,A_BOOL *pbIsRecvPending) |
| { |
| A_STATUS status = A_OK; |
| A_UCHAR host_int_status = 0x0; |
| A_UINT32 counter = 0x0; |
| |
| if(TimeoutInMs < 100) |
| { |
| TimeoutInMs = 100; |
| } |
| |
| counter = TimeoutInMs / 100; |
| |
| do |
| { |
| //Read the Host Interrupt Status Register |
| status = HIFReadWrite(pDev->HIFDevice, |
| HOST_INT_STATUS_ADDRESS, |
| &host_int_status, |
| sizeof(A_UCHAR), |
| HIF_RD_SYNC_BYTE_INC, |
| NULL); |
| if(A_FAILED(status)) |
| { |
| AR_DEBUG_PRINTF(ATH_LOG_ERR,("DevWaitForPendingRecv:Read HOST_INT_STATUS_ADDRESS Failed 0x%X\n",status)); |
| break; |
| } |
| |
| host_int_status = A_SUCCESS(status) ? (host_int_status & (1 << 0)):0; |
| if(!host_int_status) |
| { |
| status = A_OK; |
| *pbIsRecvPending = FALSE; |
| break; |
| } |
| else |
| { |
| *pbIsRecvPending = TRUE; |
| } |
| |
| A_MDELAY(100); |
| |
| counter--; |
| |
| }while(counter); |
| return status; |
| } |
| |
| void DevDumpRegisters(AR6K_DEVICE *pDev, |
| AR6K_IRQ_PROC_REGISTERS *pIrqProcRegs, |
| AR6K_IRQ_ENABLE_REGISTERS *pIrqEnableRegs) |
| { |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("\n<------- Register Table -------->\n")); |
| |
| if (pIrqProcRegs != NULL) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ANY, |
| ("Host Int Status: 0x%x\n",pIrqProcRegs->host_int_status)); |
| AR_DEBUG_PRINTF(ATH_DEBUG_ANY, |
| ("CPU Int Status: 0x%x\n",pIrqProcRegs->cpu_int_status)); |
| AR_DEBUG_PRINTF(ATH_DEBUG_ANY, |
| ("Error Int Status: 0x%x\n",pIrqProcRegs->error_int_status)); |
| AR_DEBUG_PRINTF(ATH_DEBUG_ANY, |
| ("Counter Int Status: 0x%x\n",pIrqProcRegs->counter_int_status)); |
| AR_DEBUG_PRINTF(ATH_DEBUG_ANY, |
| ("Mbox Frame: 0x%x\n",pIrqProcRegs->mbox_frame)); |
| AR_DEBUG_PRINTF(ATH_DEBUG_ANY, |
| ("Rx Lookahead Valid: 0x%x\n",pIrqProcRegs->rx_lookahead_valid)); |
| AR_DEBUG_PRINTF(ATH_DEBUG_ANY, |
| ("Rx Lookahead 0: 0x%x\n",pIrqProcRegs->rx_lookahead[0])); |
| AR_DEBUG_PRINTF(ATH_DEBUG_ANY, |
| ("Rx Lookahead 1: 0x%x\n",pIrqProcRegs->rx_lookahead[1])); |
| |
| if (pDev->MailBoxInfo.GMboxAddress != 0) { |
| /* if the target supports GMBOX hardware, dump some additional state */ |
| AR_DEBUG_PRINTF(ATH_DEBUG_ANY, |
| ("GMBOX Host Int Status 2: 0x%x\n",pIrqProcRegs->host_int_status2)); |
| AR_DEBUG_PRINTF(ATH_DEBUG_ANY, |
| ("GMBOX RX Avail: 0x%x\n",pIrqProcRegs->gmbox_rx_avail)); |
| AR_DEBUG_PRINTF(ATH_DEBUG_ANY, |
| ("GMBOX lookahead alias 0: 0x%x\n",pIrqProcRegs->rx_gmbox_lookahead_alias[0])); |
| AR_DEBUG_PRINTF(ATH_DEBUG_ANY, |
| ("GMBOX lookahead alias 1: 0x%x\n",pIrqProcRegs->rx_gmbox_lookahead_alias[1])); |
| } |
| |
| } |
| |
| if (pIrqEnableRegs != NULL) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ANY, |
| ("Int Status Enable: 0x%x\n",pIrqEnableRegs->int_status_enable)); |
| AR_DEBUG_PRINTF(ATH_DEBUG_ANY, |
| ("Counter Int Status Enable: 0x%x\n",pIrqEnableRegs->counter_int_status_enable)); |
| } |
| AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("<------------------------------->\n")); |
| } |
| |
| |
| #define DEV_GET_VIRT_DMA_INFO(p) ((DEV_SCATTER_DMA_VIRTUAL_INFO *)((p)->HIFPrivate[0])) |
| |
| static HIF_SCATTER_REQ *DevAllocScatterReq(HIF_DEVICE *Context) |
| { |
| DL_LIST *pItem; |
| AR6K_DEVICE *pDev = (AR6K_DEVICE *)Context; |
| LOCK_AR6K(pDev); |
| pItem = DL_ListRemoveItemFromHead(&pDev->ScatterReqHead); |
| UNLOCK_AR6K(pDev); |
| if (pItem != NULL) { |
| return A_CONTAINING_STRUCT(pItem, HIF_SCATTER_REQ, ListLink); |
| } |
| return NULL; |
| } |
| |
| static void DevFreeScatterReq(HIF_DEVICE *Context, HIF_SCATTER_REQ *pReq) |
| { |
| AR6K_DEVICE *pDev = (AR6K_DEVICE *)Context; |
| LOCK_AR6K(pDev); |
| DL_ListInsertTail(&pDev->ScatterReqHead, &pReq->ListLink); |
| UNLOCK_AR6K(pDev); |
| } |
| |
| A_STATUS DevCopyScatterListToFromDMABuffer(HIF_SCATTER_REQ *pReq, A_BOOL FromDMA) |
| { |
| A_UINT8 *pDMABuffer = NULL; |
| int i, remaining; |
| A_UINT32 length; |
| |
| pDMABuffer = pReq->pScatterBounceBuffer; |
| |
| if (pDMABuffer == NULL) { |
| A_ASSERT(FALSE); |
| return A_EINVAL; |
| } |
| |
| remaining = (int)pReq->TotalLength; |
| |
| for (i = 0; i < pReq->ValidScatterEntries; i++) { |
| |
| length = min((int)pReq->ScatterList[i].Length, remaining); |
| |
| if (length != (int)pReq->ScatterList[i].Length) { |
| A_ASSERT(FALSE); |
| /* there is a problem with the scatter list */ |
| return A_EINVAL; |
| } |
| |
| if (FromDMA) { |
| /* from DMA buffer */ |
| A_MEMCPY(pReq->ScatterList[i].pBuffer, pDMABuffer , length); |
| } else { |
| /* to DMA buffer */ |
| A_MEMCPY(pDMABuffer, pReq->ScatterList[i].pBuffer, length); |
| } |
| |
| pDMABuffer += length; |
| remaining -= length; |
| } |
| |
| return A_OK; |
| } |
| |
| static void DevReadWriteScatterAsyncHandler(void *Context, HTC_PACKET *pPacket) |
| { |
| AR6K_DEVICE *pDev = (AR6K_DEVICE *)Context; |
| HIF_SCATTER_REQ *pReq = (HIF_SCATTER_REQ *)pPacket->pPktContext; |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("+DevReadWriteScatterAsyncHandler: (dev: 0x%lX)\n", (unsigned long)pDev)); |
| |
| pReq->CompletionStatus = pPacket->Status; |
| |
| AR6KFreeIOPacket(pDev,pPacket); |
| |
| pReq->CompletionRoutine(pReq); |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("-DevReadWriteScatterAsyncHandler \n")); |
| } |
| |
| static A_STATUS DevReadWriteScatter(HIF_DEVICE *Context, HIF_SCATTER_REQ *pReq) |
| { |
| AR6K_DEVICE *pDev = (AR6K_DEVICE *)Context; |
| A_STATUS status = A_OK; |
| HTC_PACKET *pIOPacket = NULL; |
| A_UINT32 request = pReq->Request; |
| |
| do { |
| |
| if (pReq->TotalLength > AR6K_MAX_TRANSFER_SIZE_PER_SCATTER) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, |
| ("Invalid length: %d \n", pReq->TotalLength)); |
| break; |
| } |
| |
| if (pReq->TotalLength == 0) { |
| A_ASSERT(FALSE); |
| break; |
| } |
| |
| if (request & HIF_ASYNCHRONOUS) { |
| /* use an I/O packet to carry this request */ |
| pIOPacket = AR6KAllocIOPacket(pDev); |
| if (NULL == pIOPacket) { |
| status = A_NO_MEMORY; |
| break; |
| } |
| |
| /* save the request */ |
| pIOPacket->pPktContext = pReq; |
| /* stick in our completion routine when the I/O operation completes */ |
| pIOPacket->Completion = DevReadWriteScatterAsyncHandler; |
| pIOPacket->pContext = pDev; |
| } |
| |
| if (request & HIF_WRITE) { |
| /* in virtual DMA, we are issuing the requests through the legacy HIFReadWrite API |
| * this API will adjust the address automatically for the last byte to fall on the mailbox |
| * EOM. */ |
| |
| /* if the address is an extended address, we can adjust the address here since the extended |
| * address will bypass the normal checks in legacy HIF layers */ |
| if (pReq->Address == pDev->MailBoxInfo.MboxProp[HTC_MAILBOX].ExtendedAddress) { |
| pReq->Address += pDev->MailBoxInfo.MboxProp[HTC_MAILBOX].ExtendedSize - pReq->TotalLength; |
| } |
| } |
| |
| /* use legacy readwrite */ |
| status = HIFReadWrite(pDev->HIFDevice, |
| pReq->Address, |
| DEV_GET_VIRT_DMA_INFO(pReq)->pVirtDmaBuffer, |
| pReq->TotalLength, |
| request, |
| (request & HIF_ASYNCHRONOUS) ? pIOPacket : NULL); |
| |
| } while (FALSE); |
| |
| if ((status != A_PENDING) && A_FAILED(status) && (request & HIF_ASYNCHRONOUS)) { |
| if (pIOPacket != NULL) { |
| AR6KFreeIOPacket(pDev,pIOPacket); |
| } |
| pReq->CompletionStatus = status; |
| pReq->CompletionRoutine(pReq); |
| status = A_OK; |
| } |
| |
| return status; |
| } |
| |
| |
| static void DevCleanupVirtualScatterSupport(AR6K_DEVICE *pDev) |
| { |
| HIF_SCATTER_REQ *pReq; |
| |
| while (1) { |
| pReq = DevAllocScatterReq((HIF_DEVICE *)pDev); |
| if (NULL == pReq) { |
| break; |
| } |
| A_FREE(pReq); |
| } |
| |
| } |
| |
| /* function to set up virtual scatter support if HIF layer has not implemented the interface */ |
| static A_STATUS DevSetupVirtualScatterSupport(AR6K_DEVICE *pDev) |
| { |
| A_STATUS status = A_OK; |
| int bufferSize, sgreqSize; |
| int i; |
| DEV_SCATTER_DMA_VIRTUAL_INFO *pVirtualInfo; |
| HIF_SCATTER_REQ *pReq; |
| |
| bufferSize = sizeof(DEV_SCATTER_DMA_VIRTUAL_INFO) + |
| 2 * (A_GET_CACHE_LINE_BYTES()) + AR6K_MAX_TRANSFER_SIZE_PER_SCATTER; |
| |
| sgreqSize = sizeof(HIF_SCATTER_REQ) + |
| (AR6K_SCATTER_ENTRIES_PER_REQ - 1) * (sizeof(HIF_SCATTER_ITEM)); |
| |
| for (i = 0; i < AR6K_SCATTER_REQS; i++) { |
| /* allocate the scatter request, buffer info and the actual virtual buffer itself */ |
| pReq = (HIF_SCATTER_REQ *)A_MALLOC(sgreqSize + bufferSize); |
| |
| if (NULL == pReq) { |
| status = A_NO_MEMORY; |
| break; |
| } |
| |
| A_MEMZERO(pReq, sgreqSize); |
| |
| /* the virtual DMA starts after the scatter request struct */ |
| pVirtualInfo = (DEV_SCATTER_DMA_VIRTUAL_INFO *)((A_UINT8 *)pReq + sgreqSize); |
| A_MEMZERO(pVirtualInfo, sizeof(DEV_SCATTER_DMA_VIRTUAL_INFO)); |
| |
| pVirtualInfo->pVirtDmaBuffer = &pVirtualInfo->DataArea[0]; |
| /* align buffer to cache line in case host controller can actually DMA this */ |
| pVirtualInfo->pVirtDmaBuffer = A_ALIGN_TO_CACHE_LINE(pVirtualInfo->pVirtDmaBuffer); |
| /* store the structure in the private area */ |
| pReq->HIFPrivate[0] = pVirtualInfo; |
| /* we emulate a DMA bounce interface */ |
| pReq->ScatterMethod = HIF_SCATTER_DMA_BOUNCE; |
| pReq->pScatterBounceBuffer = pVirtualInfo->pVirtDmaBuffer; |
| /* free request to the list */ |
| DevFreeScatterReq((HIF_DEVICE *)pDev,pReq); |
| } |
| |
| if (A_FAILED(status)) { |
| DevCleanupVirtualScatterSupport(pDev); |
| } else { |
| pDev->HifScatterInfo.pAllocateReqFunc = DevAllocScatterReq; |
| pDev->HifScatterInfo.pFreeReqFunc = DevFreeScatterReq; |
| pDev->HifScatterInfo.pReadWriteScatterFunc = DevReadWriteScatter; |
| if (pDev->MailBoxInfo.MboxBusIFType == MBOX_BUS_IF_SPI) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_WARN, ("AR6K: SPI bus requires RX scatter limits\n")); |
| pDev->HifScatterInfo.MaxScatterEntries = AR6K_MIN_SCATTER_ENTRIES_PER_REQ; |
| pDev->HifScatterInfo.MaxTransferSizePerScatterReq = AR6K_MIN_TRANSFER_SIZE_PER_SCATTER; |
| } else { |
| pDev->HifScatterInfo.MaxScatterEntries = AR6K_SCATTER_ENTRIES_PER_REQ; |
| pDev->HifScatterInfo.MaxTransferSizePerScatterReq = AR6K_MAX_TRANSFER_SIZE_PER_SCATTER; |
| } |
| pDev->ScatterIsVirtual = TRUE; |
| } |
| |
| return status; |
| } |
| |
| |
| A_STATUS DevSetupMsgBundling(AR6K_DEVICE *pDev, int MaxMsgsPerTransfer) |
| { |
| A_STATUS status; |
| |
| if (pDev->MailBoxInfo.Flags & HIF_MBOX_FLAG_NO_BUNDLING) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_WARN, ("HIF requires bundling disabled\n")); |
| return A_ENOTSUP; |
| } |
| |
| status = HIFConfigureDevice(pDev->HIFDevice, |
| HIF_CONFIGURE_QUERY_SCATTER_REQUEST_SUPPORT, |
| &pDev->HifScatterInfo, |
| sizeof(pDev->HifScatterInfo)); |
| |
| if (A_FAILED(status)) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_WARN, |
| ("AR6K: ** HIF layer does not support scatter requests (%d) \n",status)); |
| |
| /* we can try to use a virtual DMA scatter mechanism using legacy HIFReadWrite() */ |
| status = DevSetupVirtualScatterSupport(pDev); |
| |
| if (A_SUCCESS(status)) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ANY, |
| ("AR6K: virtual scatter transfers enabled (max scatter items:%d: maxlen:%d) \n", |
| DEV_GET_MAX_MSG_PER_BUNDLE(pDev), DEV_GET_MAX_BUNDLE_LENGTH(pDev))); |
| } |
| |
| } else { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ANY, |
| ("AR6K: HIF layer supports scatter requests (max scatter items:%d: maxlen:%d) \n", |
| DEV_GET_MAX_MSG_PER_BUNDLE(pDev), DEV_GET_MAX_BUNDLE_LENGTH(pDev))); |
| } |
| |
| if (A_SUCCESS(status)) { |
| /* for the recv path, the maximum number of bytes per recv bundle is just limited |
| * by the maximum transfer size at the HIF layer */ |
| pDev->MaxRecvBundleSize = pDev->HifScatterInfo.MaxTransferSizePerScatterReq; |
| |
| if (pDev->MailBoxInfo.MboxBusIFType == MBOX_BUS_IF_SPI) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_WARN, ("AR6K : SPI bus requires TX bundling disabled\n")); |
| pDev->MaxSendBundleSize = 0; |
| } else { |
| /* for the send path, the max transfer size is limited by the existence and size of |
| * the extended mailbox address range */ |
| if (pDev->MailBoxInfo.MboxProp[0].ExtendedAddress != 0) { |
| pDev->MaxSendBundleSize = pDev->MailBoxInfo.MboxProp[0].ExtendedSize; |
| } else { |
| /* legacy */ |
| pDev->MaxSendBundleSize = AR6K_LEGACY_MAX_WRITE_LENGTH; |
| } |
| |
| if (pDev->MaxSendBundleSize > pDev->HifScatterInfo.MaxTransferSizePerScatterReq) { |
| /* limit send bundle size to what the HIF can support for scatter requests */ |
| pDev->MaxSendBundleSize = pDev->HifScatterInfo.MaxTransferSizePerScatterReq; |
| } |
| } |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_ANY, |
| ("AR6K: max recv: %d max send: %d \n", |
| DEV_GET_MAX_BUNDLE_RECV_LENGTH(pDev), DEV_GET_MAX_BUNDLE_SEND_LENGTH(pDev))); |
| |
| } |
| return status; |
| } |
| |
| A_STATUS DevSubmitScatterRequest(AR6K_DEVICE *pDev, HIF_SCATTER_REQ *pScatterReq, A_BOOL Read, A_BOOL Async) |
| { |
| A_STATUS status; |
| |
| if (Read) { |
| /* read operation */ |
| pScatterReq->Request = (Async) ? HIF_RD_ASYNC_BLOCK_FIX : HIF_RD_SYNC_BLOCK_FIX; |
| pScatterReq->Address = pDev->MailBoxInfo.MboxAddresses[HTC_MAILBOX]; |
| A_ASSERT(pScatterReq->TotalLength <= (A_UINT32)DEV_GET_MAX_BUNDLE_RECV_LENGTH(pDev)); |
| } else { |
| A_UINT32 mailboxWidth; |
| |
| /* write operation */ |
| pScatterReq->Request = (Async) ? HIF_WR_ASYNC_BLOCK_INC : HIF_WR_SYNC_BLOCK_INC; |
| A_ASSERT(pScatterReq->TotalLength <= (A_UINT32)DEV_GET_MAX_BUNDLE_SEND_LENGTH(pDev)); |
| if (pScatterReq->TotalLength > AR6K_LEGACY_MAX_WRITE_LENGTH) { |
| /* for large writes use the extended address */ |
| pScatterReq->Address = pDev->MailBoxInfo.MboxProp[HTC_MAILBOX].ExtendedAddress; |
| mailboxWidth = pDev->MailBoxInfo.MboxProp[HTC_MAILBOX].ExtendedSize; |
| } else { |
| pScatterReq->Address = pDev->MailBoxInfo.MboxAddresses[HTC_MAILBOX]; |
| mailboxWidth = AR6K_LEGACY_MAX_WRITE_LENGTH; |
| } |
| |
| if (!pDev->ScatterIsVirtual) { |
| /* we are passing this scatter list down to the HIF layer' scatter request handler, fixup the address |
| * so that the last byte falls on the EOM, we do this for those HIFs that support the |
| * scatter API */ |
| pScatterReq->Address += (mailboxWidth - pScatterReq->TotalLength); |
| } |
| |
| } |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_RECV | ATH_DEBUG_SEND, |
| ("DevSubmitScatterRequest, Entries: %d, Total Length: %d Mbox:0x%X (mode: %s : %s)\n", |
| pScatterReq->ValidScatterEntries, |
| pScatterReq->TotalLength, |
| pScatterReq->Address, |
| Async ? "ASYNC" : "SYNC", |
| (Read) ? "RD" : "WR")); |
| |
| status = DEV_PREPARE_SCATTER_OPERATION(pScatterReq); |
| |
| if (A_FAILED(status)) { |
| if (Async) { |
| pScatterReq->CompletionStatus = status; |
| pScatterReq->CompletionRoutine(pScatterReq); |
| return A_OK; |
| } |
| return status; |
| } |
| |
| status = pDev->HifScatterInfo.pReadWriteScatterFunc(pDev->ScatterIsVirtual ? pDev : pDev->HIFDevice, |
| pScatterReq); |
| if (!Async) { |
| /* in sync mode, we can touch the scatter request */ |
| pScatterReq->CompletionStatus = status; |
| DEV_FINISH_SCATTER_OPERATION(pScatterReq); |
| } else { |
| if (status == A_PENDING) { |
| status = A_OK; |
| } |
| } |
| |
| return status; |
| } |
| |
| |
| #ifdef MBOXHW_UNIT_TEST |
| |
| |
| /* This is a mailbox hardware unit test that must be called in a schedulable context |
| * This test is very simple, it will send a list of buffers with a counting pattern |
| * and the target will invert the data and send the message back |
| * |
| * the unit test has the following constraints: |
| * |
| * The target has at least 8 buffers of 256 bytes each. The host will send |
| * the following pattern of buffers in rapid succession : |
| * |
| * 1 buffer - 128 bytes |
| * 1 buffer - 256 bytes |
| * 1 buffer - 512 bytes |
| * 1 buffer - 1024 bytes |
| * |
| * The host will send the buffers to one mailbox and wait for buffers to be reflected |
| * back from the same mailbox. The target sends the buffers FIFO order. |
| * Once the final buffer has been received for a mailbox, the next mailbox is tested. |
| * |
| * |
| * Note: To simplifythe test , we assume that the chosen buffer sizes |
| * will fall on a nice block pad |
| * |
| * It is expected that higher-order tests will be written to stress the mailboxes using |
| * a message-based protocol (with some performance timming) that can create more |
| * randomness in the packets sent over mailboxes. |
| * |
| * */ |
| |
| #define A_ROUND_UP_PWR2(x, align) (((int) (x) + ((align)-1)) & ~((align)-1)) |
| |
| #define BUFFER_BLOCK_PAD 128 |
| |
| #if 0 |
| #define BUFFER1 128 |
| #define BUFFER2 256 |
| #define BUFFER3 512 |
| #define BUFFER4 1024 |
| #endif |
| |
| #if 1 |
| #define BUFFER1 80 |
| #define BUFFER2 200 |
| #define BUFFER3 444 |
| #define BUFFER4 800 |
| #endif |
| |
| #define TOTAL_BYTES (A_ROUND_UP_PWR2(BUFFER1,BUFFER_BLOCK_PAD) + \ |
| A_ROUND_UP_PWR2(BUFFER2,BUFFER_BLOCK_PAD) + \ |
| A_ROUND_UP_PWR2(BUFFER3,BUFFER_BLOCK_PAD) + \ |
| A_ROUND_UP_PWR2(BUFFER4,BUFFER_BLOCK_PAD) ) |
| |
| #define TEST_BYTES (BUFFER1 + BUFFER2 + BUFFER3 + BUFFER4) |
| |
| #define TEST_CREDITS_RECV_TIMEOUT 100 |
| |
| static A_UINT8 g_Buffer[TOTAL_BYTES]; |
| static A_UINT32 g_MailboxAddrs[AR6K_MAILBOXES]; |
| static A_UINT32 g_BlockSizes[AR6K_MAILBOXES]; |
| |
| #define BUFFER_PROC_LIST_DEPTH 4 |
| |
| typedef struct _BUFFER_PROC_LIST{ |
| A_UINT8 *pBuffer; |
| A_UINT32 length; |
| }BUFFER_PROC_LIST; |
| |
| |
| #define PUSH_BUFF_PROC_ENTRY(pList,len,pCurrpos) \ |
| { \ |
| (pList)->pBuffer = (pCurrpos); \ |
| (pList)->length = (len); \ |
| (pCurrpos) += (len); \ |
| (pList)++; \ |
| } |
| |
| /* a simple and crude way to send different "message" sizes */ |
| static void AssembleBufferList(BUFFER_PROC_LIST *pList) |
| { |
| A_UINT8 *pBuffer = g_Buffer; |
| |
| #if BUFFER_PROC_LIST_DEPTH < 4 |
| #error "Buffer processing list depth is not deep enough!!" |
| #endif |
| |
| PUSH_BUFF_PROC_ENTRY(pList,BUFFER1,pBuffer); |
| PUSH_BUFF_PROC_ENTRY(pList,BUFFER2,pBuffer); |
| PUSH_BUFF_PROC_ENTRY(pList,BUFFER3,pBuffer); |
| PUSH_BUFF_PROC_ENTRY(pList,BUFFER4,pBuffer); |
| |
| } |
| |
| #define FILL_ZERO TRUE |
| #define FILL_COUNTING FALSE |
| static void InitBuffers(A_BOOL Zero) |
| { |
| A_UINT16 *pBuffer16 = (A_UINT16 *)g_Buffer; |
| int i; |
| |
| /* fill buffer with 16 bit counting pattern or zeros */ |
| for (i = 0; i < (TOTAL_BYTES / 2) ; i++) { |
| if (!Zero) { |
| pBuffer16[i] = (A_UINT16)i; |
| } else { |
| pBuffer16[i] = 0; |
| } |
| } |
| } |
| |
| |
| static A_BOOL CheckOneBuffer(A_UINT16 *pBuffer16, int Length) |
| { |
| int i; |
| A_UINT16 startCount; |
| A_BOOL success = TRUE; |
| |
| /* get the starting count */ |
| startCount = pBuffer16[0]; |
| /* invert it, this is the expected value */ |
| startCount = ~startCount; |
| /* scan the buffer and verify */ |
| for (i = 0; i < (Length / 2) ; i++,startCount++) { |
| /* target will invert all the data */ |
| if ((A_UINT16)pBuffer16[i] != (A_UINT16)~startCount) { |
| success = FALSE; |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Invalid Data Got:0x%X, Expecting:0x%X (offset:%d, total:%d) \n", |
| pBuffer16[i], ((A_UINT16)~startCount), i, Length)); |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("0x%X 0x%X 0x%X 0x%X \n", |
| pBuffer16[i], pBuffer16[i + 1], pBuffer16[i + 2],pBuffer16[i+3])); |
| break; |
| } |
| } |
| |
| return success; |
| } |
| |
| static A_BOOL CheckBuffers(void) |
| { |
| int i; |
| A_BOOL success = TRUE; |
| BUFFER_PROC_LIST checkList[BUFFER_PROC_LIST_DEPTH]; |
| |
| /* assemble the list */ |
| AssembleBufferList(checkList); |
| |
| /* scan the buffers and verify */ |
| for (i = 0; i < BUFFER_PROC_LIST_DEPTH ; i++) { |
| success = CheckOneBuffer((A_UINT16 *)checkList[i].pBuffer, checkList[i].length); |
| if (!success) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Buffer : 0x%X, Length:%d failed verify \n", |
| (A_UINT32)checkList[i].pBuffer, checkList[i].length)); |
| break; |
| } |
| } |
| |
| return success; |
| } |
| |
| /* find the end marker for the last buffer we will be sending */ |
| static A_UINT16 GetEndMarker(void) |
| { |
| A_UINT8 *pBuffer; |
| BUFFER_PROC_LIST checkList[BUFFER_PROC_LIST_DEPTH]; |
| |
| /* fill up buffers with the normal counting pattern */ |
| InitBuffers(FILL_COUNTING); |
| |
| /* assemble the list we will be sending down */ |
| AssembleBufferList(checkList); |
| /* point to the last 2 bytes of the last buffer */ |
| pBuffer = &(checkList[BUFFER_PROC_LIST_DEPTH - 1].pBuffer[(checkList[BUFFER_PROC_LIST_DEPTH - 1].length) - 2]); |
| |
| /* the last count in the last buffer is the marker */ |
| return (A_UINT16)pBuffer[0] | ((A_UINT16)pBuffer[1] << 8); |
| } |
| |
| #define ATH_PRINT_OUT_ZONE ATH_DEBUG_ERR |
| |
| /* send the ordered buffers to the target */ |
| static A_STATUS SendBuffers(AR6K_DEVICE *pDev, int mbox) |
| { |
| A_STATUS status = A_OK; |
| A_UINT32 request = HIF_WR_SYNC_BLOCK_INC; |
| BUFFER_PROC_LIST sendList[BUFFER_PROC_LIST_DEPTH]; |
| int i; |
| int totalBytes = 0; |
| int paddedLength; |
| int totalwPadding = 0; |
| |
| AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Sending buffers on mailbox : %d \n",mbox)); |
| |
| /* fill buffer with counting pattern */ |
| InitBuffers(FILL_COUNTING); |
| |
| /* assemble the order in which we send */ |
| AssembleBufferList(sendList); |
| |
| for (i = 0; i < BUFFER_PROC_LIST_DEPTH; i++) { |
| |
| /* we are doing block transfers, so we need to pad everything to a block size */ |
| paddedLength = (sendList[i].length + (g_BlockSizes[mbox] - 1)) & |
| (~(g_BlockSizes[mbox] - 1)); |
| |
| /* send each buffer synchronously */ |
| status = HIFReadWrite(pDev->HIFDevice, |
| g_MailboxAddrs[mbox], |
| sendList[i].pBuffer, |
| paddedLength, |
| request, |
| NULL); |
| if (status != A_OK) { |
| break; |
| } |
| totalBytes += sendList[i].length; |
| totalwPadding += paddedLength; |
| } |
| |
| AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Sent %d bytes (%d padded bytes) to mailbox : %d \n",totalBytes,totalwPadding,mbox)); |
| |
| return status; |
| } |
| |
| /* poll the mailbox credit counter until we get a credit or timeout */ |
| static A_STATUS GetCredits(AR6K_DEVICE *pDev, int mbox, int *pCredits) |
| { |
| A_STATUS status = A_OK; |
| int timeout = TEST_CREDITS_RECV_TIMEOUT; |
| A_UINT8 credits = 0; |
| A_UINT32 address; |
| |
| while (TRUE) { |
| |
| /* Read the counter register to get credits, this auto-decrements */ |
| address = COUNT_DEC_ADDRESS + (AR6K_MAILBOXES + mbox) * 4; |
| status = HIFReadWrite(pDev->HIFDevice, address, &credits, sizeof(credits), |
| HIF_RD_SYNC_BYTE_FIX, NULL); |
| if (status != A_OK) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, |
| ("Unable to decrement the command credit count register (mbox=%d)\n",mbox)); |
| status = A_ERROR; |
| break; |
| } |
| |
| if (credits) { |
| break; |
| } |
| |
| timeout--; |
| |
| if (timeout <= 0) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, |
| (" Timeout reading credit registers (mbox=%d, address:0x%X) \n",mbox,address)); |
| status = A_ERROR; |
| break; |
| } |
| |
| /* delay a little, target may not be ready */ |
| A_MDELAY(1000); |
| |
| } |
| |
| if (status == A_OK) { |
| *pCredits = credits; |
| } |
| |
| return status; |
| } |
| |
| |
| /* wait for the buffers to come back */ |
| static A_STATUS RecvBuffers(AR6K_DEVICE *pDev, int mbox) |
| { |
| A_STATUS status = A_OK; |
| A_UINT32 request = HIF_RD_SYNC_BLOCK_INC; |
| BUFFER_PROC_LIST recvList[BUFFER_PROC_LIST_DEPTH]; |
| int curBuffer; |
| int credits; |
| int i; |
| int totalBytes = 0; |
| int paddedLength; |
| int totalwPadding = 0; |
| |
| AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Waiting for buffers on mailbox : %d \n",mbox)); |
| |
| /* zero the buffers */ |
| InitBuffers(FILL_ZERO); |
| |
| /* assemble the order in which we should receive */ |
| AssembleBufferList(recvList); |
| |
| curBuffer = 0; |
| |
| while (curBuffer < BUFFER_PROC_LIST_DEPTH) { |
| |
| /* get number of buffers that have been completed, this blocks |
| * until we get at least 1 credit or it times out */ |
| status = GetCredits(pDev, mbox, &credits); |
| |
| if (status != A_OK) { |
| break; |
| } |
| |
| AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Got %d messages on mailbox : %d \n",credits, mbox)); |
| |
| /* get all the buffers that are sitting on the queue */ |
| for (i = 0; i < credits; i++) { |
| A_ASSERT(curBuffer < BUFFER_PROC_LIST_DEPTH); |
| /* recv the current buffer synchronously, the buffers should come back in |
| * order... with padding applied by the target */ |
| paddedLength = (recvList[curBuffer].length + (g_BlockSizes[mbox] - 1)) & |
| (~(g_BlockSizes[mbox] - 1)); |
| |
| status = HIFReadWrite(pDev->HIFDevice, |
| g_MailboxAddrs[mbox], |
| recvList[curBuffer].pBuffer, |
| paddedLength, |
| request, |
| NULL); |
| if (status != A_OK) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to read %d bytes on mailbox:%d : address:0x%X \n", |
| recvList[curBuffer].length, mbox, g_MailboxAddrs[mbox])); |
| break; |
| } |
| |
| totalwPadding += paddedLength; |
| totalBytes += recvList[curBuffer].length; |
| curBuffer++; |
| } |
| |
| if (status != A_OK) { |
| break; |
| } |
| /* go back and get some more */ |
| credits = 0; |
| } |
| |
| if (totalBytes != TEST_BYTES) { |
| A_ASSERT(FALSE); |
| } else { |
| AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Got all buffers on mbox:%d total recv :%d (w/Padding : %d) \n", |
| mbox, totalBytes, totalwPadding)); |
| } |
| |
| return status; |
| |
| |
| } |
| |
| static A_STATUS DoOneMboxHWTest(AR6K_DEVICE *pDev, int mbox) |
| { |
| A_STATUS status; |
| |
| do { |
| /* send out buffers */ |
| status = SendBuffers(pDev,mbox); |
| |
| if (status != A_OK) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Sending buffers Failed : %d mbox:%d\n",status,mbox)); |
| break; |
| } |
| |
| /* go get them, this will block */ |
| status = RecvBuffers(pDev, mbox); |
| |
| if (status != A_OK) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Recv buffers Failed : %d mbox:%d\n",status,mbox)); |
| break; |
| } |
| |
| /* check the returned data patterns */ |
| if (!CheckBuffers()) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Buffer Verify Failed : mbox:%d\n",mbox)); |
| status = A_ERROR; |
| break; |
| } |
| |
| AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" Send/Recv success! mailbox : %d \n",mbox)); |
| |
| } while (FALSE); |
| |
| return status; |
| } |
| |
| /* here is where the test starts */ |
| A_STATUS DoMboxHWTest(AR6K_DEVICE *pDev) |
| { |
| int i; |
| A_STATUS status; |
| int credits = 0; |
| A_UINT8 params[4]; |
| int numBufs; |
| int bufferSize; |
| A_UINT16 temp; |
| |
| |
| AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" DoMboxHWTest START - \n")); |
| |
| do { |
| /* get the addresses for all 4 mailboxes */ |
| status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_ADDR, |
| g_MailboxAddrs, sizeof(g_MailboxAddrs)); |
| |
| if (status != A_OK) { |
| A_ASSERT(FALSE); |
| break; |
| } |
| |
| /* get the block sizes */ |
| status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_BLOCK_SIZE, |
| g_BlockSizes, sizeof(g_BlockSizes)); |
| |
| if (status != A_OK) { |
| A_ASSERT(FALSE); |
| break; |
| } |
| |
| /* note, the HIF layer usually reports mbox 0 to have a block size of |
| * 1, but our test wants to run in block-mode for all mailboxes, so we treat all mailboxes |
| * the same. */ |
| g_BlockSizes[0] = g_BlockSizes[1]; |
| AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Block Size to use: %d \n",g_BlockSizes[0])); |
| |
| if (g_BlockSizes[1] > BUFFER_BLOCK_PAD) { |
| AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("%d Block size is too large for buffer pad %d\n", |
| g_BlockSizes[1], BUFFER_BLOCK_PAD)); |
| break; |
| } |
| |
| AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Waiting for target.... \n")); |
| |
| /* the target lets us know it is ready by giving us 1 credit on |
| * mailbox 0 */ |
| status = GetCredits(pDev, 0, &credits); |
| |
| if (status != A_OK) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to wait for target ready \n")); |
| break; |
| } |
| |
| AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Target is ready ...\n")); |
| |
| /* read the first 4 scratch registers */ |
| status = HIFReadWrite(pDev->HIFDevice, |
| SCRATCH_ADDRESS, |
| params, |
| 4, |
| HIF_RD_SYNC_BYTE_INC, |
| NULL); |
| |
| if (status != A_OK) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to wait get parameters \n")); |
| break; |
| } |
| |
| numBufs = params[0]; |
| bufferSize = (int)(((A_UINT16)params[2] << 8) | (A_UINT16)params[1]); |
| |
| AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, |
| ("Target parameters: bufs per mailbox:%d, buffer size:%d bytes (total space: %d, minimum required space (w/padding): %d) \n", |
| numBufs, bufferSize, (numBufs * bufferSize), TOTAL_BYTES)); |
| |
| if ((numBufs * bufferSize) < TOTAL_BYTES) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Not Enough buffer space to run test! need:%d, got:%d \n", |
| TOTAL_BYTES, (numBufs*bufferSize))); |
| status = A_ERROR; |
| break; |
| } |
| |
| temp = GetEndMarker(); |
| |
| status = HIFReadWrite(pDev->HIFDevice, |
| SCRATCH_ADDRESS + 4, |
| (A_UINT8 *)&temp, |
| 2, |
| HIF_WR_SYNC_BYTE_INC, |
| NULL); |
| |
| if (status != A_OK) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to write end marker \n")); |
| break; |
| } |
| |
| AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("End Marker: 0x%X \n",temp)); |
| |
| temp = (A_UINT16)g_BlockSizes[1]; |
| /* convert to a mask */ |
| temp = temp - 1; |
| status = HIFReadWrite(pDev->HIFDevice, |
| SCRATCH_ADDRESS + 6, |
| (A_UINT8 *)&temp, |
| 2, |
| HIF_WR_SYNC_BYTE_INC, |
| NULL); |
| |
| if (status != A_OK) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to write block mask \n")); |
| break; |
| } |
| |
| AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Set Block Mask: 0x%X \n",temp)); |
| |
| /* execute the test on each mailbox */ |
| for (i = 0; i < AR6K_MAILBOXES; i++) { |
| status = DoOneMboxHWTest(pDev, i); |
| if (status != A_OK) { |
| break; |
| } |
| } |
| |
| } while (FALSE); |
| |
| if (status == A_OK) { |
| AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" DoMboxHWTest DONE - SUCCESS! - \n")); |
| } else { |
| AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" DoMboxHWTest DONE - FAILED! - \n")); |
| } |
| /* don't let HTC_Start continue, the target is actually not running any HTC code */ |
| return A_ERROR; |
| } |
| #endif |
| |
| |
| |
