linux/drivers/staging/brcm80211/sys/wlc_cfg.h - nest-guard/1.0/linux - Git at Google

 /*
  * Copyright (c) 2010 Broadcom Corporation
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
  * copyright notice and this permission notice appear in all copies.
  *
  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
  * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
  * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
  * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */

 #ifndef _wlc_cfg_h_
 #define _wlc_cfg_h_

 #define NBANDS(wlc) ((wlc)->pub->_nbands)
 #define NBANDS_PUB(pub) ((pub)->_nbands)
 #define NBANDS_HW(hw) ((hw)->_nbands)

 #define IS_SINGLEBAND_5G(device)	0

 /* Keep WLC_HIGH_ONLY, WLC_SPLIT for USB extension later on */
 #if !defined(WLC_LOW)
 #define WLC_HIGH_ONLY
 #endif
 #if !defined(WLC_LOW)
 #define WLC_SPLIT
 #endif

 /* **** Core type/rev defaults **** */
 #define D11_DEFAULT	0x0fffffb0	/* Supported  D11 revs: 4, 5, 7-27
 					 * also need to update wlc.h MAXCOREREV
 					 */

 #define NPHY_DEFAULT	0x000001ff	/* Supported nphy revs:
 					 *      0       4321a0
 					 *      1       4321a1
 					 *      2       4321b0/b1/c0/c1
 					 *      3       4322a0
 					 *      4       4322a1
 					 *      5       4716a0
 					 *      6       43222a0, 43224a0
 					 *      7       43226a0
 					 *      8       5357a0, 43236a0
 					 */

 #define LCNPHY_DEFAULT	0x00000007	/* Supported lcnphy revs:
 					 *      0       4313a0, 4336a0, 4330a0
 					 *      1
 					 *      2       4330a0
 					 */

 #define SSLPNPHY_DEFAULT 0x0000000f	/* Supported sslpnphy revs:
 					 *      0       4329a0/k0
 					 *      1       4329b0/4329C0
 					 *      2       4319a0
 					 *      3       5356a0
 					 */

 #ifdef BCMSDIO
 #define D11CONF 0x100000
 #define SSLPNCONF 2
 #define GCCONF	0
 #define ACCONF	0
 #define NCONF	0
 #define LPCONF	0
 #define LCNCONF	0
 #define NTXD 32
 #define NRXD 16
 #define NRXBUFPOST 8
 #define WLC_DATAHIWAT 32
 #define RXBND 8
 #define MAXPKTCB 64
 #define AMPDU_NUM_MPDU 8
 #endif

 /* For undefined values, use defaults */
 #ifndef D11CONF
 #define D11CONF	D11_DEFAULT
 #endif
 #ifndef NCONF
 #define NCONF	NPHY_DEFAULT
 #endif
 #ifndef LCNCONF
 #define LCNCONF	LCNPHY_DEFAULT
 #endif

 #ifndef SSLPNCONF
 #define SSLPNCONF	SSLPNPHY_DEFAULT
 #endif

 #define BAND2G
 #define BAND5G
 #define WLANTSEL	1

 /********************************************************************
  * Phy/Core Configuration.  Defines macros to to check core phy/rev *
  * compile-time configuration.  Defines default core support.       *
  * ******************************************************************
  */

 /* Basic macros to check a configuration bitmask */

 #define CONF_HAS(config, val)	((config) & (1 << (val)))
 #define CONF_MSK(config, mask)	((config) & (mask))
 #define MSK_RANGE(low, hi)	((1 << ((hi)+1)) - (1 << (low)))
 #define CONF_RANGE(config, low, hi) (CONF_MSK(config, MSK_RANGE(low, high)))

 #define CONF_IS(config, val)	((config) == (1 << (val)))
 #define CONF_GE(config, val)	((config) & (0-(1 << (val))))
 #define CONF_GT(config, val)	((config) & (0-2*(1 << (val))))
 #define CONF_LT(config, val)	((config) & ((1 << (val))-1))
 #define CONF_LE(config, val)	((config) & (2*(1 << (val))-1))

 /* Wrappers for some of the above, specific to config constants */

 #define NCONF_HAS(val)	CONF_HAS(NCONF, val)
 #define NCONF_MSK(mask)	CONF_MSK(NCONF, mask)
 #define NCONF_IS(val)	CONF_IS(NCONF, val)
 #define NCONF_GE(val)	CONF_GE(NCONF, val)
 #define NCONF_GT(val)	CONF_GT(NCONF, val)
 #define NCONF_LT(val)	CONF_LT(NCONF, val)
 #define NCONF_LE(val)	CONF_LE(NCONF, val)

 #define LCNCONF_HAS(val)	CONF_HAS(LCNCONF, val)
 #define LCNCONF_MSK(mask)	CONF_MSK(LCNCONF, mask)
 #define LCNCONF_IS(val)		CONF_IS(LCNCONF, val)
 #define LCNCONF_GE(val)		CONF_GE(LCNCONF, val)
 #define LCNCONF_GT(val)		CONF_GT(LCNCONF, val)
 #define LCNCONF_LT(val)		CONF_LT(LCNCONF, val)
 #define LCNCONF_LE(val)		CONF_LE(LCNCONF, val)

 #define D11CONF_HAS(val) CONF_HAS(D11CONF, val)
 #define D11CONF_MSK(mask) CONF_MSK(D11CONF, mask)
 #define D11CONF_IS(val)	CONF_IS(D11CONF, val)
 #define D11CONF_GE(val)	CONF_GE(D11CONF, val)
 #define D11CONF_GT(val)	CONF_GT(D11CONF, val)
 #define D11CONF_LT(val)	CONF_LT(D11CONF, val)
 #define D11CONF_LE(val)	CONF_LE(D11CONF, val)

 #define PHYCONF_HAS(val) CONF_HAS(PHYTYPE, val)
 #define PHYCONF_IS(val)	CONF_IS(PHYTYPE, val)

 #define NREV_IS(var, val)	(NCONF_HAS(val) && (NCONF_IS(val) || ((var) == (val))))
 #define NREV_GE(var, val)	(NCONF_GE(val) && (!NCONF_LT(val) || ((var) >= (val))))
 #define NREV_GT(var, val)	(NCONF_GT(val) && (!NCONF_LE(val) || ((var) > (val))))
 #define NREV_LT(var, val)	(NCONF_LT(val) && (!NCONF_GE(val) || ((var) < (val))))
 #define NREV_LE(var, val)	(NCONF_LE(val) && (!NCONF_GT(val) || ((var) <= (val))))

 #define LCNREV_IS(var, val)	(LCNCONF_HAS(val) && (LCNCONF_IS(val) || ((var) == (val))))
 #define LCNREV_GE(var, val)	(LCNCONF_GE(val) && (!LCNCONF_LT(val) || ((var) >= (val))))
 #define LCNREV_GT(var, val)	(LCNCONF_GT(val) && (!LCNCONF_LE(val) || ((var) > (val))))
 #define LCNREV_LT(var, val)	(LCNCONF_LT(val) && (!LCNCONF_GE(val) || ((var) < (val))))
 #define LCNREV_LE(var, val)	(LCNCONF_LE(val) && (!LCNCONF_GT(val) || ((var) <= (val))))

 #define D11REV_IS(var, val)	(D11CONF_HAS(val) && (D11CONF_IS(val) || ((var) == (val))))
 #define D11REV_GE(var, val)	(D11CONF_GE(val) && (!D11CONF_LT(val) || ((var) >= (val))))
 #define D11REV_GT(var, val)	(D11CONF_GT(val) && (!D11CONF_LE(val) || ((var) > (val))))
 #define D11REV_LT(var, val)	(D11CONF_LT(val) && (!D11CONF_GE(val) || ((var) < (val))))
 #define D11REV_LE(var, val)	(D11CONF_LE(val) && (!D11CONF_GT(val) || ((var) <= (val))))

 #define PHYTYPE_IS(var, val)	(PHYCONF_HAS(val) && (PHYCONF_IS(val) || ((var) == (val))))

 /* Finally, early-exit from switch case if anyone wants it... */

 #define CASECHECK(config, val)	if (!(CONF_HAS(config, val))) break
 #define CASEMSK(config, mask)	if (!(CONF_MSK(config, mask))) break

 #if (D11CONF ^ (D11CONF & D11_DEFAULT))
 #error "Unsupported MAC revision configured"
 #endif
 #if (NCONF ^ (NCONF & NPHY_DEFAULT))
 #error "Unsupported NPHY revision configured"
 #endif
 #if (LCNCONF ^ (LCNCONF & LCNPHY_DEFAULT))
 #error "Unsupported LPPHY revision configured"
 #endif

 /* *** Consistency checks *** */
 #if !D11CONF
 #error "No MAC revisions configured!"
 #endif

 #if !NCONF && !LCNCONF && !SSLPNCONF
 #error "No PHY configured!"
 #endif

 /* Set up PHYTYPE automatically: (depends on PHY_TYPE_X, from d11.h) */

 #define _PHYCONF_N (1 << PHY_TYPE_N)

 #if LCNCONF
 #define _PHYCONF_LCN (1 << PHY_TYPE_LCN)
 #else
 #define _PHYCONF_LCN 0
 #endif				/* LCNCONF */

 #if SSLPNCONF
 #define _PHYCONF_SSLPN (1 << PHY_TYPE_SSN)
 #else
 #define _PHYCONF_SSLPN 0
 #endif				/* SSLPNCONF */

 #define PHYTYPE (_PHYCONF_N | _PHYCONF_LCN | _PHYCONF_SSLPN)

 /* Utility macro to identify 802.11n (HT) capable PHYs */
 #define PHYTYPE_11N_CAP(phytype) \
 	(PHYTYPE_IS(phytype, PHY_TYPE_N) ||	\
 	 PHYTYPE_IS(phytype, PHY_TYPE_LCN) || \
 	 PHYTYPE_IS(phytype, PHY_TYPE_SSN))

 /* Last but not least: shorter wlc-specific var checks */
 #define WLCISNPHY(band)		PHYTYPE_IS((band)->phytype, PHY_TYPE_N)
 #define WLCISLCNPHY(band)	PHYTYPE_IS((band)->phytype, PHY_TYPE_LCN)
 #define WLCISSSLPNPHY(band)	PHYTYPE_IS((band)->phytype, PHY_TYPE_SSN)

 #define WLC_PHY_11N_CAP(band)	PHYTYPE_11N_CAP((band)->phytype)

 /**********************************************************************
  * ------------- End of Core phy/rev configuration. ----------------- *
  * ********************************************************************
  */

 /*************************************************
  * Defaults for tunables (e.g. sizing constants)
  *
  * For each new tunable, add a member to the end
  * of wlc_tunables_t in wlc_pub.h to enable
  * runtime checks of tunable values. (Directly
  * using the macros in code invalidates ROM code)
  *
  * ***********************************************
  */
 #ifndef NTXD
 #define NTXD		256	/* Max # of entries in Tx FIFO based on 4kb page size */
 #endif				/* NTXD */
 #ifndef NRXD
 #define NRXD		256	/* Max # of entries in Rx FIFO based on 4kb page size */
 #endif				/* NRXD */

 #ifndef NRXBUFPOST
 #define	NRXBUFPOST	32	/* try to keep this # rbufs posted to the chip */
 #endif				/* NRXBUFPOST */

 #ifndef MAXSCB			/* station control blocks in cache */
 #define MAXSCB		32	/* Maximum SCBs in cache for STA */
 #endif				/* MAXSCB */

 #ifndef AMPDU_NUM_MPDU
 #define AMPDU_NUM_MPDU		16	/* max allowed number of mpdus in an ampdu (2 streams) */
 #endif				/* AMPDU_NUM_MPDU */

 #ifndef AMPDU_NUM_MPDU_3STREAMS
 #define AMPDU_NUM_MPDU_3STREAMS	32	/* max allowed number of mpdus in an ampdu for 3+ streams */
 #endif				/* AMPDU_NUM_MPDU_3STREAMS */

 /* Count of packet callback structures. either of following
  * 1. Set to the number of SCBs since a STA
  * can queue up a rate callback for each IBSS STA it knows about, and an AP can
  * queue up an "are you there?" Null Data callback for each associated STA
  * 2. controlled by tunable config file
  */
 #ifndef MAXPKTCB
 #define MAXPKTCB	MAXSCB	/* Max number of packet callbacks */
 #endif				/* MAXPKTCB */

 #ifndef CTFPOOLSZ
 #define CTFPOOLSZ       128
 #endif				/* CTFPOOLSZ */

 /* NetBSD also needs to keep track of this */
 #define WLC_MAX_UCODE_BSS	(16)	/* Number of BSS handled in ucode bcn/prb */
 #define WLC_MAX_UCODE_BSS4	(4)	/* Number of BSS handled in sw bcn/prb */
 #ifndef WLC_MAXBSSCFG
 #define WLC_MAXBSSCFG		(1)	/* max # BSS configs */
 #endif				/* WLC_MAXBSSCFG */

 #ifndef MAXBSS
 #define MAXBSS		64	/* max # available networks */
 #endif				/* MAXBSS */

 #ifndef WLC_DATAHIWAT
 #define WLC_DATAHIWAT		50	/* data msg txq hiwat mark */
 #endif				/* WLC_DATAHIWAT */

 #ifndef WLC_AMPDUDATAHIWAT
 #define WLC_AMPDUDATAHIWAT 255
 #endif				/* WLC_AMPDUDATAHIWAT */

 /* bounded rx loops */
 #ifndef RXBND
 #define RXBND		8	/* max # frames to process in wlc_recv() */
 #endif				/* RXBND */
 #ifndef TXSBND
 #define TXSBND		8	/* max # tx status to process in wlc_txstatus() */
 #endif				/* TXSBND */

 #define BAND_5G(bt)	((bt) == WLC_BAND_5G)
 #define BAND_2G(bt)	((bt) == WLC_BAND_2G)

 #define WLBANDINITDATA(_data)	_data
 #define WLBANDINITFN(_fn)	_fn

 #define WLANTSEL_ENAB(wlc)	1

 #endif				/* _wlc_cfg_h_ */
	/*
	* Copyright (c) 2010 Broadcom Corporation
	*
	* Permission to use, copy, modify, and/or distribute this software for any
	* purpose with or without fee is hereby granted, provided that the above
	* copyright notice and this permission notice appear in all copies.
	*
	* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
	* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
	* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
	* SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
	* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
	* OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
	* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
	*/

	#ifndef _wlc_cfg_h_
	#define _wlc_cfg_h_

	#define NBANDS(wlc) ((wlc)->pub->_nbands)
	#define NBANDS_PUB(pub) ((pub)->_nbands)
	#define NBANDS_HW(hw) ((hw)->_nbands)

	#define IS_SINGLEBAND_5G(device) 0

	/* Keep WLC_HIGH_ONLY, WLC_SPLIT for USB extension later on */
	#if !defined(WLC_LOW)
	#define WLC_HIGH_ONLY
	#endif
	#if !defined(WLC_LOW)
	#define WLC_SPLIT
	#endif

	/* ** Core type/rev defaults ** */
	#define D11_DEFAULT 0x0fffffb0 /* Supported D11 revs: 4, 5, 7-27
	* also need to update wlc.h MAXCOREREV
	*/

	#define NPHY_DEFAULT 0x000001ff /* Supported nphy revs:
	* 0 4321a0
	* 1 4321a1
	* 2 4321b0/b1/c0/c1
	* 3 4322a0
	* 4 4322a1
	* 5 4716a0
	* 6 43222a0, 43224a0
	* 7 43226a0
	* 8 5357a0, 43236a0
	*/

	#define LCNPHY_DEFAULT 0x00000007 /* Supported lcnphy revs:
	* 0 4313a0, 4336a0, 4330a0
	* 1
	* 2 4330a0
	*/

	#define SSLPNPHY_DEFAULT 0x0000000f /* Supported sslpnphy revs:
	* 0 4329a0/k0
	* 1 4329b0/4329C0
	* 2 4319a0
	* 3 5356a0
	*/

	#ifdef BCMSDIO
	#define D11CONF 0x100000
	#define SSLPNCONF 2
	#define GCCONF 0
	#define ACCONF 0
	#define NCONF 0
	#define LPCONF 0
	#define LCNCONF 0
	#define NTXD 32
	#define NRXD 16
	#define NRXBUFPOST 8
	#define WLC_DATAHIWAT 32
	#define RXBND 8
	#define MAXPKTCB 64
	#define AMPDU_NUM_MPDU 8
	#endif

	/* For undefined values, use defaults */
	#ifndef D11CONF
	#define D11CONF D11_DEFAULT
	#endif
	#ifndef NCONF
	#define NCONF NPHY_DEFAULT
	#endif
	#ifndef LCNCONF
	#define LCNCONF LCNPHY_DEFAULT
	#endif

	#ifndef SSLPNCONF
	#define SSLPNCONF SSLPNPHY_DEFAULT
	#endif

	#define BAND2G
	#define BAND5G
	#define WLANTSEL 1

	/********************************************************************
	* Phy/Core Configuration. Defines macros to to check core phy/rev *
	* compile-time configuration. Defines default core support. *
	* ******************************************************************
	*/

	/* Basic macros to check a configuration bitmask */

	#define CONF_HAS(config, val) ((config) & (1 << (val)))
	#define CONF_MSK(config, mask) ((config) & (mask))
	#define MSK_RANGE(low, hi) ((1 << ((hi)+1)) - (1 << (low)))
	#define CONF_RANGE(config, low, hi) (CONF_MSK(config, MSK_RANGE(low, high)))

	#define CONF_IS(config, val) ((config) == (1 << (val)))
	#define CONF_GE(config, val) ((config) & (0-(1 << (val))))
	#define CONF_GT(config, val) ((config) & (0-2*(1 << (val))))
	#define CONF_LT(config, val) ((config) & ((1 << (val))-1))
	#define CONF_LE(config, val) ((config) & (2*(1 << (val))-1))

	/* Wrappers for some of the above, specific to config constants */

	#define NCONF_HAS(val) CONF_HAS(NCONF, val)
	#define NCONF_MSK(mask) CONF_MSK(NCONF, mask)
	#define NCONF_IS(val) CONF_IS(NCONF, val)
	#define NCONF_GE(val) CONF_GE(NCONF, val)
	#define NCONF_GT(val) CONF_GT(NCONF, val)
	#define NCONF_LT(val) CONF_LT(NCONF, val)
	#define NCONF_LE(val) CONF_LE(NCONF, val)

	#define LCNCONF_HAS(val) CONF_HAS(LCNCONF, val)
	#define LCNCONF_MSK(mask) CONF_MSK(LCNCONF, mask)
	#define LCNCONF_IS(val) CONF_IS(LCNCONF, val)
	#define LCNCONF_GE(val) CONF_GE(LCNCONF, val)
	#define LCNCONF_GT(val) CONF_GT(LCNCONF, val)
	#define LCNCONF_LT(val) CONF_LT(LCNCONF, val)
	#define LCNCONF_LE(val) CONF_LE(LCNCONF, val)

	#define D11CONF_HAS(val) CONF_HAS(D11CONF, val)
	#define D11CONF_MSK(mask) CONF_MSK(D11CONF, mask)
	#define D11CONF_IS(val) CONF_IS(D11CONF, val)
	#define D11CONF_GE(val) CONF_GE(D11CONF, val)
	#define D11CONF_GT(val) CONF_GT(D11CONF, val)
	#define D11CONF_LT(val) CONF_LT(D11CONF, val)
	#define D11CONF_LE(val) CONF_LE(D11CONF, val)

	#define PHYCONF_HAS(val) CONF_HAS(PHYTYPE, val)
	#define PHYCONF_IS(val) CONF_IS(PHYTYPE, val)

	#define NREV_IS(var, val) (NCONF_HAS(val) && (NCONF_IS(val) \|\| ((var) == (val))))
	#define NREV_GE(var, val) (NCONF_GE(val) && (!NCONF_LT(val) \|\| ((var) >= (val))))
	#define NREV_GT(var, val) (NCONF_GT(val) && (!NCONF_LE(val) \|\| ((var) > (val))))
	#define NREV_LT(var, val) (NCONF_LT(val) && (!NCONF_GE(val) \|\| ((var) < (val))))
	#define NREV_LE(var, val) (NCONF_LE(val) && (!NCONF_GT(val) \|\| ((var) <= (val))))

	#define LCNREV_IS(var, val) (LCNCONF_HAS(val) && (LCNCONF_IS(val) \|\| ((var) == (val))))
	#define LCNREV_GE(var, val) (LCNCONF_GE(val) && (!LCNCONF_LT(val) \|\| ((var) >= (val))))
	#define LCNREV_GT(var, val) (LCNCONF_GT(val) && (!LCNCONF_LE(val) \|\| ((var) > (val))))
	#define LCNREV_LT(var, val) (LCNCONF_LT(val) && (!LCNCONF_GE(val) \|\| ((var) < (val))))
	#define LCNREV_LE(var, val) (LCNCONF_LE(val) && (!LCNCONF_GT(val) \|\| ((var) <= (val))))

	#define D11REV_IS(var, val) (D11CONF_HAS(val) && (D11CONF_IS(val) \|\| ((var) == (val))))
	#define D11REV_GE(var, val) (D11CONF_GE(val) && (!D11CONF_LT(val) \|\| ((var) >= (val))))
	#define D11REV_GT(var, val) (D11CONF_GT(val) && (!D11CONF_LE(val) \|\| ((var) > (val))))
	#define D11REV_LT(var, val) (D11CONF_LT(val) && (!D11CONF_GE(val) \|\| ((var) < (val))))
	#define D11REV_LE(var, val) (D11CONF_LE(val) && (!D11CONF_GT(val) \|\| ((var) <= (val))))

	#define PHYTYPE_IS(var, val) (PHYCONF_HAS(val) && (PHYCONF_IS(val) \|\| ((var) == (val))))

	/* Finally, early-exit from switch case if anyone wants it... */

	#define CASECHECK(config, val) if (!(CONF_HAS(config, val))) break
	#define CASEMSK(config, mask) if (!(CONF_MSK(config, mask))) break

	#if (D11CONF ^ (D11CONF & D11_DEFAULT))
	#error "Unsupported MAC revision configured"
	#endif
	#if (NCONF ^ (NCONF & NPHY_DEFAULT))
	#error "Unsupported NPHY revision configured"
	#endif
	#if (LCNCONF ^ (LCNCONF & LCNPHY_DEFAULT))
	#error "Unsupported LPPHY revision configured"
	#endif

	/* * Consistency checks * */
	#if !D11CONF
	#error "No MAC revisions configured!"
	#endif

	#if !NCONF && !LCNCONF && !SSLPNCONF
	#error "No PHY configured!"
	#endif

	/* Set up PHYTYPE automatically: (depends on PHY_TYPE_X, from d11.h) */

	#define _PHYCONF_N (1 << PHY_TYPE_N)

	#if LCNCONF
	#define _PHYCONF_LCN (1 << PHY_TYPE_LCN)
	#else
	#define _PHYCONF_LCN 0
	#endif /* LCNCONF */

	#if SSLPNCONF
	#define _PHYCONF_SSLPN (1 << PHY_TYPE_SSN)
	#else
	#define _PHYCONF_SSLPN 0
	#endif /* SSLPNCONF */

	#define PHYTYPE (_PHYCONF_N \| _PHYCONF_LCN \| _PHYCONF_SSLPN)

	/* Utility macro to identify 802.11n (HT) capable PHYs */
	#define PHYTYPE_11N_CAP(phytype) \
	(PHYTYPE_IS(phytype, PHY_TYPE_N) \|\| \
	PHYTYPE_IS(phytype, PHY_TYPE_LCN) \|\| \
	PHYTYPE_IS(phytype, PHY_TYPE_SSN))

	/* Last but not least: shorter wlc-specific var checks */
	#define WLCISNPHY(band) PHYTYPE_IS((band)->phytype, PHY_TYPE_N)
	#define WLCISLCNPHY(band) PHYTYPE_IS((band)->phytype, PHY_TYPE_LCN)
	#define WLCISSSLPNPHY(band) PHYTYPE_IS((band)->phytype, PHY_TYPE_SSN)

	#define WLC_PHY_11N_CAP(band) PHYTYPE_11N_CAP((band)->phytype)

	/**********************************************************************
	* ------------- End of Core phy/rev configuration. ----------------- *
	* ********************************************************************
	*/

	/*************************************************
	* Defaults for tunables (e.g. sizing constants)
	*
	* For each new tunable, add a member to the end
	* of wlc_tunables_t in wlc_pub.h to enable
	* runtime checks of tunable values. (Directly
	* using the macros in code invalidates ROM code)
	*
	* ***********************************************
	*/
	#ifndef NTXD
	#define NTXD 256 /* Max # of entries in Tx FIFO based on 4kb page size */
	#endif /* NTXD */
	#ifndef NRXD
	#define NRXD 256 /* Max # of entries in Rx FIFO based on 4kb page size */
	#endif /* NRXD */

	#ifndef NRXBUFPOST
	#define NRXBUFPOST 32 /* try to keep this # rbufs posted to the chip */
	#endif /* NRXBUFPOST */

	#ifndef MAXSCB /* station control blocks in cache */
	#define MAXSCB 32 /* Maximum SCBs in cache for STA */
	#endif /* MAXSCB */

	#ifndef AMPDU_NUM_MPDU
	#define AMPDU_NUM_MPDU 16 /* max allowed number of mpdus in an ampdu (2 streams) */
	#endif /* AMPDU_NUM_MPDU */

	#ifndef AMPDU_NUM_MPDU_3STREAMS
	#define AMPDU_NUM_MPDU_3STREAMS 32 /* max allowed number of mpdus in an ampdu for 3+ streams */
	#endif /* AMPDU_NUM_MPDU_3STREAMS */

	/* Count of packet callback structures. either of following
	* 1. Set to the number of SCBs since a STA
	* can queue up a rate callback for each IBSS STA it knows about, and an AP can
	* queue up an "are you there?" Null Data callback for each associated STA
	* 2. controlled by tunable config file
	*/
	#ifndef MAXPKTCB
	#define MAXPKTCB MAXSCB /* Max number of packet callbacks */
	#endif /* MAXPKTCB */

	#ifndef CTFPOOLSZ
	#define CTFPOOLSZ 128
	#endif /* CTFPOOLSZ */

	/* NetBSD also needs to keep track of this */
	#define WLC_MAX_UCODE_BSS (16) /* Number of BSS handled in ucode bcn/prb */
	#define WLC_MAX_UCODE_BSS4 (4) /* Number of BSS handled in sw bcn/prb */
	#ifndef WLC_MAXBSSCFG
	#define WLC_MAXBSSCFG (1) /* max # BSS configs */
	#endif /* WLC_MAXBSSCFG */

	#ifndef MAXBSS
	#define MAXBSS 64 /* max # available networks */
	#endif /* MAXBSS */

	#ifndef WLC_DATAHIWAT
	#define WLC_DATAHIWAT 50 /* data msg txq hiwat mark */
	#endif /* WLC_DATAHIWAT */

	#ifndef WLC_AMPDUDATAHIWAT
	#define WLC_AMPDUDATAHIWAT 255
	#endif /* WLC_AMPDUDATAHIWAT */

	/* bounded rx loops */
	#ifndef RXBND
	#define RXBND 8 /* max # frames to process in wlc_recv() */
	#endif /* RXBND */
	#ifndef TXSBND
	#define TXSBND 8 /* max # tx status to process in wlc_txstatus() */
	#endif /* TXSBND */

	#define BAND_5G(bt) ((bt) == WLC_BAND_5G)
	#define BAND_2G(bt) ((bt) == WLC_BAND_2G)

	#define WLBANDINITDATA(_data) _data
	#define WLBANDINITFN(_fn) _fn

	#define WLANTSEL_ENAB(wlc) 1

	#endif /* _wlc_cfg_h_ */