blob: 25ba2a4236399b64095a4c6289c962f50a8c90eb [file] [log] [blame]
/*
* Copyright (c) 2010 Broadcom Corporation
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
* SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
* OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#ifndef _WLC_RATE_H_
#define _WLC_RATE_H_
extern const u8 rate_info[];
extern const struct wlc_rateset cck_ofdm_mimo_rates;
extern const struct wlc_rateset ofdm_mimo_rates;
extern const struct wlc_rateset cck_ofdm_rates;
extern const struct wlc_rateset ofdm_rates;
extern const struct wlc_rateset cck_rates;
extern const struct wlc_rateset gphy_legacy_rates;
extern const struct wlc_rateset wlc_lrs_rates;
extern const struct wlc_rateset rate_limit_1_2;
typedef struct mcs_info {
u32 phy_rate_20; /* phy rate in kbps [20Mhz] */
u32 phy_rate_40; /* phy rate in kbps [40Mhz] */
u32 phy_rate_20_sgi; /* phy rate in kbps [20Mhz] with SGI */
u32 phy_rate_40_sgi; /* phy rate in kbps [40Mhz] with SGI */
u8 tx_phy_ctl3; /* phy ctl byte 3, code rate, modulation type, # of streams */
u8 leg_ofdm; /* matching legacy ofdm rate in 500bkps */
} mcs_info_t;
#define WLC_MAXMCS 32 /* max valid mcs index */
#define MCS_TABLE_SIZE 33 /* Number of mcs entries in the table */
extern const mcs_info_t mcs_table[];
#define MCS_INVALID 0xFF
#define MCS_CR_MASK 0x07 /* Code Rate bit mask */
#define MCS_MOD_MASK 0x38 /* Modulation bit shift */
#define MCS_MOD_SHIFT 3 /* MOdulation bit shift */
#define MCS_TXS_MASK 0xc0 /* num tx streams - 1 bit mask */
#define MCS_TXS_SHIFT 6 /* num tx streams - 1 bit shift */
#define MCS_CR(_mcs) (mcs_table[_mcs].tx_phy_ctl3 & MCS_CR_MASK)
#define MCS_MOD(_mcs) ((mcs_table[_mcs].tx_phy_ctl3 & MCS_MOD_MASK) >> MCS_MOD_SHIFT)
#define MCS_TXS(_mcs) ((mcs_table[_mcs].tx_phy_ctl3 & MCS_TXS_MASK) >> MCS_TXS_SHIFT)
#define MCS_RATE(_mcs, _is40, _sgi) (_sgi ? \
(_is40 ? mcs_table[_mcs].phy_rate_40_sgi : mcs_table[_mcs].phy_rate_20_sgi) : \
(_is40 ? mcs_table[_mcs].phy_rate_40 : mcs_table[_mcs].phy_rate_20))
#define VALID_MCS(_mcs) ((_mcs < MCS_TABLE_SIZE))
#define WLC_RATE_FLAG 0x80 /* Rate flag: basic or ofdm */
/* Macros to use the rate_info table */
#define RATE_MASK 0x7f /* Rate value mask w/o basic rate flag */
#define RATE_MASK_FULL 0xff /* Rate value mask with basic rate flag */
#define WLC_RATE_500K_TO_BPS(rate) ((rate) * 500000) /* convert 500kbps to bps */
/* rate spec : holds rate and mode specific information required to generate a tx frame. */
/* Legacy CCK and OFDM information is held in the same manner as was done in the past */
/* (in the lower byte) the upper 3 bytes primarily hold MIMO specific information */
typedef u32 ratespec_t;
/* rate spec bit fields */
#define RSPEC_RATE_MASK 0x0000007F /* Either 500Kbps units or MIMO MCS idx */
#define RSPEC_MIMORATE 0x08000000 /* mimo MCS is stored in RSPEC_RATE_MASK */
#define RSPEC_BW_MASK 0x00000700 /* mimo bw mask */
#define RSPEC_BW_SHIFT 8 /* mimo bw shift */
#define RSPEC_STF_MASK 0x00003800 /* mimo Space/Time/Frequency mode mask */
#define RSPEC_STF_SHIFT 11 /* mimo Space/Time/Frequency mode shift */
#define RSPEC_CT_MASK 0x0000C000 /* mimo coding type mask */
#define RSPEC_CT_SHIFT 14 /* mimo coding type shift */
#define RSPEC_STC_MASK 0x00300000 /* mimo num STC streams per PLCP defn. */
#define RSPEC_STC_SHIFT 20 /* mimo num STC streams per PLCP defn. */
#define RSPEC_LDPC_CODING 0x00400000 /* mimo bit indicates adv coding in use */
#define RSPEC_SHORT_GI 0x00800000 /* mimo bit indicates short GI in use */
#define RSPEC_OVERRIDE 0x80000000 /* bit indicates override both rate & mode */
#define RSPEC_OVERRIDE_MCS_ONLY 0x40000000 /* bit indicates override rate only */
#define WLC_HTPHY 127 /* HT PHY Membership */
#define RSPEC_ACTIVE(rspec) (rspec & (RSPEC_RATE_MASK | RSPEC_MIMORATE))
#define RSPEC2RATE(rspec) ((rspec & RSPEC_MIMORATE) ? \
MCS_RATE((rspec & RSPEC_RATE_MASK), RSPEC_IS40MHZ(rspec), RSPEC_ISSGI(rspec)) : \
(rspec & RSPEC_RATE_MASK))
/* return rate in unit of 500Kbps -- for internal use in wlc_rate_sel.c */
#define RSPEC2RATE500K(rspec) ((rspec & RSPEC_MIMORATE) ? \
MCS_RATE((rspec & RSPEC_RATE_MASK), state->is40bw, RSPEC_ISSGI(rspec))/500 : \
(rspec & RSPEC_RATE_MASK))
#define CRSPEC2RATE500K(rspec) ((rspec & RSPEC_MIMORATE) ? \
MCS_RATE((rspec & RSPEC_RATE_MASK), RSPEC_IS40MHZ(rspec), RSPEC_ISSGI(rspec))/500 :\
(rspec & RSPEC_RATE_MASK))
#define RSPEC2KBPS(rspec) (IS_MCS(rspec) ? RSPEC2RATE(rspec) : RSPEC2RATE(rspec)*500)
#define RSPEC_PHYTXBYTE2(rspec) ((rspec & 0xff00) >> 8)
#define RSPEC_GET_BW(rspec) ((rspec & RSPEC_BW_MASK) >> RSPEC_BW_SHIFT)
#define RSPEC_IS40MHZ(rspec) ((((rspec & RSPEC_BW_MASK) >> RSPEC_BW_SHIFT) == \
PHY_TXC1_BW_40MHZ) || (((rspec & RSPEC_BW_MASK) >> \
RSPEC_BW_SHIFT) == PHY_TXC1_BW_40MHZ_DUP))
#define RSPEC_ISSGI(rspec) ((rspec & RSPEC_SHORT_GI) == RSPEC_SHORT_GI)
#define RSPEC_MIMOPLCP3(rspec) ((rspec & 0xf00000) >> 16)
#define PLCP3_ISSGI(plcp) (plcp & (RSPEC_SHORT_GI >> 16))
#define RSPEC_STC(rspec) ((rspec & RSPEC_STC_MASK) >> RSPEC_STC_SHIFT)
#define RSPEC_STF(rspec) ((rspec & RSPEC_STF_MASK) >> RSPEC_STF_SHIFT)
#define PLCP3_ISSTBC(plcp) ((plcp & (RSPEC_STC_MASK) >> 16) == 0x10)
#define PLCP3_STC_MASK 0x30
#define PLCP3_STC_SHIFT 4
/* Rate info table; takes a legacy rate or ratespec_t */
#define IS_MCS(r) (r & RSPEC_MIMORATE)
#define IS_OFDM(r) (!IS_MCS(r) && (rate_info[(r) & RSPEC_RATE_MASK] & WLC_RATE_FLAG))
#define IS_CCK(r) (!IS_MCS(r) && (((r) & RATE_MASK) == WLC_RATE_1M || \
((r) & RATE_MASK) == WLC_RATE_2M || \
((r) & RATE_MASK) == WLC_RATE_5M5 || ((r) & RATE_MASK) == WLC_RATE_11M))
#define IS_SINGLE_STREAM(mcs) (((mcs) <= HIGHEST_SINGLE_STREAM_MCS) || ((mcs) == 32))
#define CCK_RSPEC(cck) ((cck) & RSPEC_RATE_MASK)
#define OFDM_RSPEC(ofdm) (((ofdm) & RSPEC_RATE_MASK) |\
(PHY_TXC1_MODE_CDD << RSPEC_STF_SHIFT))
#define LEGACY_RSPEC(rate) (IS_CCK(rate) ? CCK_RSPEC(rate) : OFDM_RSPEC(rate))
#define MCS_RSPEC(mcs) (((mcs) & RSPEC_RATE_MASK) | RSPEC_MIMORATE | \
(IS_SINGLE_STREAM(mcs) ? (PHY_TXC1_MODE_CDD << RSPEC_STF_SHIFT) : \
(PHY_TXC1_MODE_SDM << RSPEC_STF_SHIFT)))
/* Convert encoded rate value in plcp header to numerical rates in 500 KHz increments */
extern const u8 ofdm_rate_lookup[];
#define OFDM_PHY2MAC_RATE(rlpt) (ofdm_rate_lookup[rlpt & 0x7])
#define CCK_PHY2MAC_RATE(signal) (signal/5)
/* Rates specified in wlc_rateset_filter() */
#define WLC_RATES_CCK_OFDM 0
#define WLC_RATES_CCK 1
#define WLC_RATES_OFDM 2
/* use the stuct form instead of typedef to fix dependency problems */
struct wlc_rateset;
/* sanitize, and sort a rateset with the basic bit(s) preserved, validate rateset */
extern bool wlc_rate_hwrs_filter_sort_validate(struct wlc_rateset *rs,
const struct wlc_rateset *hw_rs,
bool check_brate,
u8 txstreams);
/* copy rateset src to dst as-is (no masking or sorting) */
extern void wlc_rateset_copy(const struct wlc_rateset *src,
struct wlc_rateset *dst);
/* would be nice to have these documented ... */
extern ratespec_t wlc_compute_rspec(d11rxhdr_t *rxh, u8 *plcp);
extern void wlc_rateset_filter(struct wlc_rateset *src, struct wlc_rateset *dst,
bool basic_only, u8 rates, uint xmask,
bool mcsallow);
extern void wlc_rateset_default(struct wlc_rateset *rs_tgt,
const struct wlc_rateset *rs_hw, uint phy_type,
int bandtype, bool cck_only, uint rate_mask,
bool mcsallow, u8 bw, u8 txstreams);
extern s16 wlc_rate_legacy_phyctl(uint rate);
extern void wlc_rateset_mcs_upd(struct wlc_rateset *rs, u8 txstreams);
extern void wlc_rateset_mcs_clear(struct wlc_rateset *rateset);
extern void wlc_rateset_mcs_build(struct wlc_rateset *rateset, u8 txstreams);
extern void wlc_rateset_bw_mcs_filter(struct wlc_rateset *rateset, u8 bw);
#endif /* _WLC_RATE_H_ */