Google Git
Sign in
nest-open-source / nest-guard / 1.0 / linux / 6754b876e4c89285b30ff59800d23e21ce2dbe3f / . / linux / drivers / staging / comedi / drivers / pcl818.c
blob: d2bd6f82b830b3b3a5f6c45946c658a9f40a418c [file] [log] [blame]
/*
comedi/drivers/pcl818.c
Author: Michal Dobes <dobes@tesnet.cz>
hardware driver for Advantech cards:
card: PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818, PCL-718
driver: pcl818l, pcl818h, pcl818hd, pcl818hg, pcl818, pcl718
*/
/*
Driver: pcl818
Description: Advantech PCL-818 cards, PCL-718
Author: Michal Dobes <dobes@tesnet.cz>
Devices: [Advantech] PCL-818L (pcl818l), PCL-818H (pcl818h),
PCL-818HD (pcl818hd), PCL-818HG (pcl818hg), PCL-818 (pcl818),
PCL-718 (pcl718)
Status: works
All cards have 16 SE/8 DIFF ADCs, one or two DACs, 16 DI and 16 DO.
Differences are only at maximal sample speed, range list and FIFO
support.
The driver support AI mode 0, 1, 3 other subdevices (AO, DI, DO) support
only mode 0. If DMA/FIFO/INT are disabled then AI support only mode 0.
PCL-818HD and PCL-818HG support 1kword FIFO. Driver support this FIFO
but this code is untested.
A word or two about DMA. Driver support DMA operations at two ways:
1) DMA uses two buffers and after one is filled then is generated
INT and DMA restart with second buffer. With this mode I'm unable run
more that 80Ksamples/secs without data dropouts on K6/233.
2) DMA uses one buffer and run in autoinit mode and the data are
from DMA buffer moved on the fly with 2kHz interrupts from RTC.
This mode is used if the interrupt 8 is available for allocation.
If not, then first DMA mode is used. With this I can run at
full speed one card (100ksamples/secs) or two cards with
60ksamples/secs each (more is problem on account of ISA limitations).
To use this mode you must have compiled kernel with disabled
"Enhanced Real Time Clock Support".
Maybe you can have problems if you use xntpd or similar.
If you've data dropouts with DMA mode 2 then:
a) disable IDE DMA
b) switch text mode console to fb.
Options for PCL-818L:
[0] - IO Base
[1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7)
[2] - DMA (0=disable, 1, 3)
[3] - 0, 10=10MHz clock for 8254
1= 1MHz clock for 8254
[4] - 0, 5=A/D input -5V.. +5V
1, 10=A/D input -10V..+10V
[5] - 0, 5=D/A output 0-5V (internal reference -5V)
1, 10=D/A output 0-10V (internal reference -10V)
2 =D/A output unknown (external reference)
Options for PCL-818, PCL-818H:
[0] - IO Base
[1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7)
[2] - DMA (0=disable, 1, 3)
[3] - 0, 10=10MHz clock for 8254
1= 1MHz clock for 8254
[4] - 0, 5=D/A output 0-5V (internal reference -5V)
1, 10=D/A output 0-10V (internal reference -10V)
2 =D/A output unknown (external reference)
Options for PCL-818HD, PCL-818HG:
[0] - IO Base
[1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7)
[2] - DMA/FIFO (-1=use FIFO, 0=disable both FIFO and DMA,
1=use DMA ch 1, 3=use DMA ch 3)
[3] - 0, 10=10MHz clock for 8254
1= 1MHz clock for 8254
[4] - 0, 5=D/A output 0-5V (internal reference -5V)
1, 10=D/A output 0-10V (internal reference -10V)
2 =D/A output unknown (external reference)
Options for PCL-718:
[0] - IO Base
[1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7)
[2] - DMA (0=disable, 1, 3)
[3] - 0, 10=10MHz clock for 8254
1= 1MHz clock for 8254
[4] - 0=A/D Range is +/-10V
1= +/-5V
2= +/-2.5V
3= +/-1V
4= +/-0.5V
5= user defined bipolar
6= 0-10V
7= 0-5V
8= 0-2V
9= 0-1V
10= user defined unipolar
[5] - 0, 5=D/A outputs 0-5V (internal reference -5V)
1, 10=D/A outputs 0-10V (internal reference -10V)
2=D/A outputs unknown (external reference)
[6] - 0, 60=max 60kHz A/D sampling
1,100=max 100kHz A/D sampling (PCL-718 with Option 001 installed)
*/
#include "../comedidev.h"
#include <linux/ioport.h>
#include <linux/mc146818rtc.h>
#include <linux/gfp.h>
#include <linux/delay.h>
#include <asm/dma.h>
#include "8253.h"
/* #define PCL818_MODE13_AO 1 */
/* boards constants */
#define boardPCL818L 0
#define boardPCL818H 1
#define boardPCL818HD 2
#define boardPCL818HG 3
#define boardPCL818 4
#define boardPCL718 5
/* IO space len */
#define PCLx1x_RANGE 16
/* IO space len if we use FIFO */
#define PCLx1xFIFO_RANGE 32
/* W: clear INT request */
#define PCL818_CLRINT 8
/* R: return status byte */
#define PCL818_STATUS 8
/* R: A/D high byte W: A/D range control */
#define PCL818_RANGE 1
/* R: next mux scan channel W: mux scan channel & range control pointer */
#define PCL818_MUX 2
/* R/W: operation control register */
#define PCL818_CONTROL 9
/* W: counter enable */
#define PCL818_CNTENABLE 10
/* R: low byte of A/D W: soft A/D trigger */
#define PCL818_AD_LO 0
/* R: high byte of A/D W: A/D range control */
#define PCL818_AD_HI 1
/* W: D/A low&high byte */
#define PCL818_DA_LO 4
#define PCL818_DA_HI 5
/* R: low&high byte of DI */
#define PCL818_DI_LO 3
#define PCL818_DI_HI 11
/* W: low&high byte of DO */
#define PCL818_DO_LO 3
#define PCL818_DO_HI 11
/* W: PCL718 second D/A */
#define PCL718_DA2_LO 6
#define PCL718_DA2_HI 7
/* counters */
#define PCL818_CTR0 12
#define PCL818_CTR1 13
#define PCL818_CTR2 14
/* W: counter control */
#define PCL818_CTRCTL 15
/* W: fifo enable/disable */
#define PCL818_FI_ENABLE 6
/* W: fifo interrupt clear */
#define PCL818_FI_INTCLR 20
/* W: fifo interrupt clear */
#define PCL818_FI_FLUSH 25
/* R: fifo status */
#define PCL818_FI_STATUS 25
/* R: one record from FIFO */
#define PCL818_FI_DATALO 23
#define PCL818_FI_DATAHI 23
/* type of interrupt handler */
#define INT_TYPE_AI1_INT 1
#define INT_TYPE_AI1_DMA 2
#define INT_TYPE_AI1_FIFO 3
#define INT_TYPE_AI3_INT 4
#define INT_TYPE_AI3_DMA 5
#define INT_TYPE_AI3_FIFO 6
#ifdef PCL818_MODE13_AO
#define INT_TYPE_AO1_INT 7
#define INT_TYPE_AO3_INT 8
#endif
#ifdef unused
/* RTC stuff... */
#define INT_TYPE_AI1_DMA_RTC 9
#define INT_TYPE_AI3_DMA_RTC 10
#define RTC_IRQ 8
#define RTC_IO_EXTENT 0x10
#endif
#define MAGIC_DMA_WORD 0x5a5a
static const struct comedi_lrange range_pcl818h_ai = { 9, {
BIP_RANGE(5),
BIP_RANGE(2.5),
BIP_RANGE(1.25),
BIP_RANGE(0.625),
UNI_RANGE(10),
UNI_RANGE(5),
UNI_RANGE(2.5),
UNI_RANGE(1.25),
BIP_RANGE(10),
}
};
static const struct comedi_lrange range_pcl818hg_ai = { 10, {
BIP_RANGE(5),
BIP_RANGE(0.5),
BIP_RANGE(0.05),
BIP_RANGE(0.005),
UNI_RANGE(10),
UNI_RANGE(1),
UNI_RANGE(0.1),
UNI_RANGE(0.01),
BIP_RANGE(10),
BIP_RANGE(1),
BIP_RANGE(0.1),
BIP_RANGE(0.01),
}
};
static const struct comedi_lrange range_pcl818l_l_ai = { 4, {
BIP_RANGE(5),
BIP_RANGE(2.5),
BIP_RANGE(1.25),
BIP_RANGE(0.625),
}
};
static const struct comedi_lrange range_pcl818l_h_ai = { 4, {
BIP_RANGE(10),
BIP_RANGE(5),
BIP_RANGE(2.5),
BIP_RANGE(1.25),
}
};
static const struct comedi_lrange range718_bipolar1 = { 1, {BIP_RANGE(1),} };
static const struct comedi_lrange range718_bipolar0_5 =
{ 1, {BIP_RANGE(0.5),} };
static const struct comedi_lrange range718_unipolar2 = { 1, {UNI_RANGE(2),} };
static const struct comedi_lrange range718_unipolar1 = { 1, {BIP_RANGE(1),} };
static int pcl818_attach(struct comedi_device *dev,
struct comedi_devconfig *it);
static int pcl818_detach(struct comedi_device *dev);
#ifdef unused
static int RTC_lock = 0; /* RTC lock */
static int RTC_timer_lock = 0; /* RTC int lock */
#endif
struct pcl818_board {
const char *name; /* driver name */
int n_ranges; /* len of range list */
int n_aichan_se; /* num of A/D chans in single ended mode */
int n_aichan_diff; /* num of A/D chans in diferencial mode */
unsigned int ns_min; /* minimal alllowed delay between samples (in ns) */
int n_aochan; /* num of D/A chans */
int n_dichan; /* num of DI chans */
int n_dochan; /* num of DO chans */
const struct comedi_lrange *ai_range_type; /* default A/D rangelist */
const struct comedi_lrange *ao_range_type; /* default D/A rangelist */
unsigned int io_range; /* len of IO space */
unsigned int IRQbits; /* allowed interrupts */
unsigned int DMAbits; /* allowed DMA chans */
int ai_maxdata; /* maxdata for A/D */
int ao_maxdata; /* maxdata for D/A */
unsigned char fifo; /* 1=board has FIFO */
int is_818;
};
static const struct pcl818_board boardtypes[] = {
{"pcl818l", 4, 16, 8, 25000, 1, 16, 16, &range_pcl818l_l_ai,
&range_unipolar5, PCLx1x_RANGE, 0x00fc,
0x0a, 0xfff, 0xfff, 0, 1},
{"pcl818h", 9, 16, 8, 10000, 1, 16, 16, &range_pcl818h_ai,
&range_unipolar5, PCLx1x_RANGE, 0x00fc,
0x0a, 0xfff, 0xfff, 0, 1},
{"pcl818hd", 9, 16, 8, 10000, 1, 16, 16, &range_pcl818h_ai,
&range_unipolar5, PCLx1x_RANGE, 0x00fc,
0x0a, 0xfff, 0xfff, 1, 1},
{"pcl818hg", 12, 16, 8, 10000, 1, 16, 16, &range_pcl818hg_ai,
&range_unipolar5, PCLx1x_RANGE, 0x00fc,
0x0a, 0xfff, 0xfff, 1, 1},
{"pcl818", 9, 16, 8, 10000, 2, 16, 16, &range_pcl818h_ai,
&range_unipolar5, PCLx1x_RANGE, 0x00fc,
0x0a, 0xfff, 0xfff, 0, 1},
{"pcl718", 1, 16, 8, 16000, 2, 16, 16, &range_unipolar5,
&range_unipolar5, PCLx1x_RANGE, 0x00fc,
0x0a, 0xfff, 0xfff, 0, 0},
/* pcm3718 */
{"pcm3718", 9, 16, 8, 10000, 0, 16, 16, &range_pcl818h_ai,
&range_unipolar5, PCLx1x_RANGE, 0x00fc,
0x0a, 0xfff, 0xfff, 0, 1 /* XXX ? */ },
};
#define n_boardtypes (sizeof(boardtypes)/sizeof(struct pcl818_board))
static struct comedi_driver driver_pcl818 = {
.driver_name = "pcl818",
.module = THIS_MODULE,
.attach = pcl818_attach,
.detach = pcl818_detach,
.board_name = &boardtypes[0].name,
.num_names = n_boardtypes,
.offset = sizeof(struct pcl818_board),
};
static int __init driver_pcl818_init_module(void)
{
return comedi_driver_register(&driver_pcl818);
}
static void __exit driver_pcl818_cleanup_module(void)
{
comedi_driver_unregister(&driver_pcl818);
}
module_init(driver_pcl818_init_module);
module_exit(driver_pcl818_cleanup_module);
struct pcl818_private {
unsigned int dma; /* used DMA, 0=don't use DMA */
int dma_rtc; /* 1=RTC used with DMA, 0=no RTC alloc */
unsigned int io_range;
#ifdef unused
unsigned long rtc_iobase; /* RTC port region */
unsigned int rtc_iosize;
unsigned int rtc_irq;
struct timer_list rtc_irq_timer; /* timer for RTC sanity check */
unsigned long rtc_freq; /* RTC int freq */
int rtc_irq_blocked; /* 1=we now do AI with DMA&RTC */
#endif
unsigned long dmabuf[2]; /* pointers to begin of DMA buffers */
unsigned int dmapages[2]; /* len of DMA buffers in PAGE_SIZEs */
unsigned int hwdmaptr[2]; /* hardware address of DMA buffers */
unsigned int hwdmasize[2]; /* len of DMA buffers in Bytes */
unsigned int dmasamplsize; /* size in samples hwdmasize[0]/2 */
unsigned int last_top_dma; /* DMA pointer in last RTC int */
int next_dma_buf; /* which DMA buffer will be used next round */
long dma_runs_to_end; /* how many we must permorm DMA transfer to end of record */
unsigned long last_dma_run; /* how many bytes we must transfer on last DMA page */
unsigned char neverending_ai; /* if=1, then we do neverending record (you must use cancel()) */
unsigned int ns_min; /* manimal alllowed delay between samples (in us) for actual card */
int i8253_osc_base; /* 1/frequency of on board oscilator in ns */
int irq_free; /* 1=have allocated IRQ */
int irq_blocked; /* 1=IRQ now uses any subdev */
int irq_was_now_closed; /* when IRQ finish, there's stored int818_mode for last interrupt */
int ai_mode; /* who now uses IRQ - 1=AI1 int, 2=AI1 dma, 3=AI3 int, 4AI3 dma */
struct comedi_subdevice *last_int_sub; /* ptr to subdevice which now finish */
int ai_act_scan; /* how many scans we finished */
int ai_act_chan; /* actual position in actual scan */
unsigned int act_chanlist[16]; /* MUX setting for actual AI operations */
unsigned int act_chanlist_len; /* how long is actual MUX list */
unsigned int act_chanlist_pos; /* actual position in MUX list */
unsigned int ai_scans; /* len of scanlist */
unsigned int ai_n_chan; /* how many channels is measured */
unsigned int *ai_chanlist; /* actaul chanlist */
unsigned int ai_flags; /* flaglist */
unsigned int ai_data_len; /* len of data buffer */
short *ai_data; /* data buffer */
unsigned int ai_timer1; /* timers */
unsigned int ai_timer2;
struct comedi_subdevice *sub_ai; /* ptr to AI subdevice */
unsigned char usefifo; /* 1=use fifo */
unsigned int ao_readback[2];
};
static const unsigned int muxonechan[] = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, /* used for gain list programming */
0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff
};
#define devpriv ((struct pcl818_private *)dev->private)
#define this_board ((const struct pcl818_board *)dev->board_ptr)
/*
==============================================================================
*/
static void setup_channel_list(struct comedi_device *dev,
struct comedi_subdevice *s,
unsigned int *chanlist, unsigned int n_chan,
unsigned int seglen);
static int check_channel_list(struct comedi_device *dev,
struct comedi_subdevice *s,
unsigned int *chanlist, unsigned int n_chan);
static int pcl818_ai_cancel(struct comedi_device *dev,
struct comedi_subdevice *s);
static void start_pacer(struct comedi_device *dev, int mode,
unsigned int divisor1, unsigned int divisor2);
#ifdef unused
static int set_rtc_irq_bit(unsigned char bit);
static void rtc_dropped_irq(unsigned long data);
static int rtc_setfreq_irq(int freq);
#endif
/*
==============================================================================
ANALOG INPUT MODE0, 818 cards, slow version
*/
static int pcl818_ai_insn_read(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
int n;
int timeout;
/* software trigger, DMA and INT off */
outb(0, dev->iobase + PCL818_CONTROL);
/* select channel */
outb(muxonechan[CR_CHAN(insn->chanspec)], dev->iobase + PCL818_MUX);
/* select gain */
outb(CR_RANGE(insn->chanspec), dev->iobase + PCL818_RANGE);
for (n = 0; n < insn->n; n++) {
/* clear INT (conversion end) flag */
outb(0, dev->iobase + PCL818_CLRINT);
/* start conversion */
outb(0, dev->iobase + PCL818_AD_LO);
timeout = 100;
while (timeout--) {
if (inb(dev->iobase + PCL818_STATUS) & 0x10)
goto conv_finish;
udelay(1);
}
comedi_error(dev, "A/D insn timeout");
/* clear INT (conversion end) flag */
outb(0, dev->iobase + PCL818_CLRINT);
return -EIO;
conv_finish:
data[n] = ((inb(dev->iobase + PCL818_AD_HI) << 4) |
(inb(dev->iobase + PCL818_AD_LO) >> 4));
}
return n;
}
/*
==============================================================================
ANALOG OUTPUT MODE0, 818 cards
only one sample per call is supported
*/
static int pcl818_ao_insn_read(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
int n;
int chan = CR_CHAN(insn->chanspec);
for (n = 0; n < insn->n; n++) {
data[n] = devpriv->ao_readback[chan];
}
return n;
}
static int pcl818_ao_insn_write(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
int n;
int chan = CR_CHAN(insn->chanspec);
for (n = 0; n < insn->n; n++) {
devpriv->ao_readback[chan] = data[n];
outb((data[n] & 0x000f) << 4, dev->iobase +
(chan ? PCL718_DA2_LO : PCL818_DA_LO));
outb((data[n] & 0x0ff0) >> 4, dev->iobase +
(chan ? PCL718_DA2_HI : PCL818_DA_HI));
}
return n;
}
/*
==============================================================================
DIGITAL INPUT MODE0, 818 cards
only one sample per call is supported
*/
static int pcl818_di_insn_bits(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
if (insn->n != 2)
return -EINVAL;
data[1] = inb(dev->iobase + PCL818_DI_LO) |
(inb(dev->iobase + PCL818_DI_HI) << 8);
return 2;
}
/*
==============================================================================
DIGITAL OUTPUT MODE0, 818 cards
only one sample per call is supported
*/
static int pcl818_do_insn_bits(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
if (insn->n != 2)
return -EINVAL;
s->state &= ~data[0];
s->state |= (data[0] & data[1]);
outb(s->state & 0xff, dev->iobase + PCL818_DO_LO);
outb((s->state >> 8), dev->iobase + PCL818_DO_HI);
data[1] = s->state;
return 2;
}
/*
==============================================================================
analog input interrupt mode 1 & 3, 818 cards
one sample per interrupt version
*/
static irqreturn_t interrupt_pcl818_ai_mode13_int(int irq, void *d)
{
struct comedi_device *dev = d;
struct comedi_subdevice *s = dev->subdevices + 0;
int low;
int timeout = 50; /* wait max 50us */
while (timeout--) {
if (inb(dev->iobase + PCL818_STATUS) & 0x10)
goto conv_finish;
udelay(1);
}
outb(0, dev->iobase + PCL818_STATUS); /* clear INT request */
comedi_error(dev, "A/D mode1/3 IRQ without DRDY!");
pcl818_ai_cancel(dev, s);
s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
comedi_event(dev, s);
return IRQ_HANDLED;
conv_finish:
low = inb(dev->iobase + PCL818_AD_LO);
comedi_buf_put(s->async, ((inb(dev->iobase + PCL818_AD_HI) << 4) | (low >> 4))); /* get one sample */
outb(0, dev->iobase + PCL818_CLRINT); /* clear INT request */
if ((low & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) { /* dropout! */
printk
("comedi: A/D mode1/3 IRQ - channel dropout %x!=%x !\n",
(low & 0xf),
devpriv->act_chanlist[devpriv->act_chanlist_pos]);
pcl818_ai_cancel(dev, s);
s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
comedi_event(dev, s);
return IRQ_HANDLED;
}
devpriv->act_chanlist_pos++;
if (devpriv->act_chanlist_pos >= devpriv->act_chanlist_len) {
devpriv->act_chanlist_pos = 0;
}
s->async->cur_chan++;
if (s->async->cur_chan >= devpriv->ai_n_chan) {
/* printk("E"); */
s->async->cur_chan = 0;
devpriv->ai_act_scan--;
}
if (!devpriv->neverending_ai) {
if (devpriv->ai_act_scan == 0) { /* all data sampled */
pcl818_ai_cancel(dev, s);
s->async->events |= COMEDI_CB_EOA;
}
}
comedi_event(dev, s);
return IRQ_HANDLED;
}
/*
==============================================================================
analog input dma mode 1 & 3, 818 cards
*/
static irqreturn_t interrupt_pcl818_ai_mode13_dma(int irq, void *d)
{
struct comedi_device *dev = d;
struct comedi_subdevice *s = dev->subdevices + 0;
int i, len, bufptr;
unsigned long flags;
short *ptr;
disable_dma(devpriv->dma);
devpriv->next_dma_buf = 1 - devpriv->next_dma_buf;
if ((devpriv->dma_runs_to_end) > -1 || devpriv->neverending_ai) { /* switch dma bufs */
set_dma_mode(devpriv->dma, DMA_MODE_READ);
flags = claim_dma_lock();
set_dma_addr(devpriv->dma,
devpriv->hwdmaptr[devpriv->next_dma_buf]);
if (devpriv->dma_runs_to_end || devpriv->neverending_ai) {
set_dma_count(devpriv->dma,
devpriv->hwdmasize[devpriv->
next_dma_buf]);
} else {
set_dma_count(devpriv->dma, devpriv->last_dma_run);
}
release_dma_lock(flags);
enable_dma(devpriv->dma);
}
printk("comedi: A/D mode1/3 IRQ \n");
devpriv->dma_runs_to_end--;
outb(0, dev->iobase + PCL818_CLRINT); /* clear INT request */
ptr = (short *)devpriv->dmabuf[1 - devpriv->next_dma_buf];
len = devpriv->hwdmasize[0] >> 1;
bufptr = 0;
for (i = 0; i < len; i++) {
if ((ptr[bufptr] & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) { /* dropout! */
printk
("comedi: A/D mode1/3 DMA - channel dropout %d(card)!=%d(chanlist) at %d !\n",
(ptr[bufptr] & 0xf),
devpriv->act_chanlist[devpriv->act_chanlist_pos],
devpriv->act_chanlist_pos);
pcl818_ai_cancel(dev, s);
s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
comedi_event(dev, s);
return IRQ_HANDLED;
}
comedi_buf_put(s->async, ptr[bufptr++] >> 4); /* get one sample */
devpriv->act_chanlist_pos++;
if (devpriv->act_chanlist_pos >= devpriv->act_chanlist_len) {
devpriv->act_chanlist_pos = 0;
}
s->async->cur_chan++;
if (s->async->cur_chan >= devpriv->ai_n_chan) {
s->async->cur_chan = 0;
devpriv->ai_act_scan--;
}
if (!devpriv->neverending_ai)
if (devpriv->ai_act_scan == 0) { /* all data sampled */
pcl818_ai_cancel(dev, s);
s->async->events |= COMEDI_CB_EOA;
comedi_event(dev, s);
/* printk("done int ai13 dma\n"); */
return IRQ_HANDLED;
}
}
if (len > 0)
comedi_event(dev, s);
return IRQ_HANDLED;
}
#ifdef unused
/*
==============================================================================
analog input dma mode 1 & 3 over RTC, 818 cards
*/
static irqreturn_t interrupt_pcl818_ai_mode13_dma_rtc(int irq, void *d)
{
struct comedi_device *dev = d;
struct comedi_subdevice *s = dev->subdevices + 0;
unsigned long tmp;
unsigned int top1, top2, i, bufptr;
long ofs_dats;
short *dmabuf = (short *)devpriv->dmabuf[0];
/* outb(2,0x378); */
switch (devpriv->ai_mode) {
case INT_TYPE_AI1_DMA_RTC:
case INT_TYPE_AI3_DMA_RTC:
tmp = (CMOS_READ(RTC_INTR_FLAGS) & 0xF0);
mod_timer(&devpriv->rtc_irq_timer,
jiffies + HZ / devpriv->rtc_freq + 2 * HZ / 100);
for (i = 0; i < 10; i++) {
top1 = get_dma_residue(devpriv->dma);
top2 = get_dma_residue(devpriv->dma);
if (top1 == top2)
break;
}
if (top1 != top2)
return IRQ_HANDLED;
top1 = devpriv->hwdmasize[0] - top1; /* where is now DMA in buffer */
top1 >>= 1;
ofs_dats = top1 - devpriv->last_top_dma; /* new samples from last call */
if (ofs_dats < 0)
ofs_dats = (devpriv->dmasamplsize) + ofs_dats;
if (!ofs_dats)
return IRQ_HANDLED; /* exit=no new samples from last call */
/* obsluz data */
i = devpriv->last_top_dma - 1;
i &= (devpriv->dmasamplsize - 1);
if (dmabuf[i] != MAGIC_DMA_WORD) { /* DMA overflow! */
comedi_error(dev, "A/D mode1/3 DMA buffer overflow!");
/* printk("I %d dmabuf[i] %d %d\n",i,dmabuf[i],devpriv->dmasamplsize); */
pcl818_ai_cancel(dev, s);
s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
comedi_event(dev, s);
return IRQ_HANDLED;
}
/* printk("r %ld ",ofs_dats); */
bufptr = devpriv->last_top_dma;
for (i = 0; i < ofs_dats; i++) {
if ((dmabuf[bufptr] & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) { /* dropout! */
printk
("comedi: A/D mode1/3 DMA - channel dropout %d!=%d !\n",
(dmabuf[bufptr] & 0xf),
devpriv->
act_chanlist[devpriv->act_chanlist_pos]);
pcl818_ai_cancel(dev, s);
s->async->events |=
COMEDI_CB_EOA | COMEDI_CB_ERROR;
comedi_event(dev, s);
return IRQ_HANDLED;
}
comedi_buf_put(s->async, dmabuf[bufptr++] >> 4); /* get one sample */
bufptr &= (devpriv->dmasamplsize - 1);
devpriv->act_chanlist_pos++;
if (devpriv->act_chanlist_pos >=
devpriv->act_chanlist_len) {
devpriv->act_chanlist_pos = 0;
}
s->async->cur_chan++;
if (s->async->cur_chan >= devpriv->ai_n_chan) {
s->async->cur_chan = 0;
devpriv->ai_act_scan--;
}
if (!devpriv->neverending_ai)
if (devpriv->ai_act_scan == 0) { /* all data sampled */
pcl818_ai_cancel(dev, s);
s->async->events |= COMEDI_CB_EOA;
comedi_event(dev, s);
/* printk("done int ai13 dma\n"); */
return IRQ_HANDLED;
}
}
devpriv->last_top_dma = bufptr;
bufptr--;
bufptr &= (devpriv->dmasamplsize - 1);
dmabuf[bufptr] = MAGIC_DMA_WORD;
comedi_event(dev, s);
/* outb(0,0x378); */
return IRQ_HANDLED;
}
/* outb(0,0x378); */
return IRQ_HANDLED;
}
#endif
/*
==============================================================================
analog input interrupt mode 1 & 3, 818HD/HG cards
*/
static irqreturn_t interrupt_pcl818_ai_mode13_fifo(int irq, void *d)
{
struct comedi_device *dev = d;
struct comedi_subdevice *s = dev->subdevices + 0;
int i, len, lo;
outb(0, dev->iobase + PCL818_FI_INTCLR); /* clear fifo int request */
lo = inb(dev->iobase + PCL818_FI_STATUS);
if (lo & 4) {
comedi_error(dev, "A/D mode1/3 FIFO overflow!");
pcl818_ai_cancel(dev, s);
s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
comedi_event(dev, s);
return IRQ_HANDLED;
}
if (lo & 1) {
comedi_error(dev, "A/D mode1/3 FIFO interrupt without data!");
pcl818_ai_cancel(dev, s);
s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
comedi_event(dev, s);
return IRQ_HANDLED;
}
if (lo & 2) {
len = 512;
} else {
len = 0;
}
for (i = 0; i < len; i++) {
lo = inb(dev->iobase + PCL818_FI_DATALO);
if ((lo & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) { /* dropout! */
printk
("comedi: A/D mode1/3 FIFO - channel dropout %d!=%d !\n",
(lo & 0xf),
devpriv->act_chanlist[devpriv->act_chanlist_pos]);
pcl818_ai_cancel(dev, s);
s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
comedi_event(dev, s);
return IRQ_HANDLED;
}
comedi_buf_put(s->async, (lo >> 4) | (inb(dev->iobase + PCL818_FI_DATAHI) << 4)); /* get one sample */
devpriv->act_chanlist_pos++;
if (devpriv->act_chanlist_pos >= devpriv->act_chanlist_len) {
devpriv->act_chanlist_pos = 0;
}
s->async->cur_chan++;
if (s->async->cur_chan >= devpriv->ai_n_chan) {
s->async->cur_chan = 0;
devpriv->ai_act_scan--;
}
if (!devpriv->neverending_ai)
if (devpriv->ai_act_scan == 0) { /* all data sampled */
pcl818_ai_cancel(dev, s);
s->async->events |= COMEDI_CB_EOA;
comedi_event(dev, s);
return IRQ_HANDLED;
}
}
if (len > 0)
comedi_event(dev, s);
return IRQ_HANDLED;
}
/*
==============================================================================
INT procedure
*/
static irqreturn_t interrupt_pcl818(int irq, void *d)
{
struct comedi_device *dev = d;
if (!dev->attached) {
comedi_error(dev, "premature interrupt");
return IRQ_HANDLED;
}
/* printk("I\n"); */
if (devpriv->irq_blocked && devpriv->irq_was_now_closed) {
if ((devpriv->neverending_ai || (!devpriv->neverending_ai &&
devpriv->ai_act_scan > 0)) &&
(devpriv->ai_mode == INT_TYPE_AI1_DMA ||
devpriv->ai_mode == INT_TYPE_AI3_DMA)) {
/* The cleanup from ai_cancel() has been delayed
until now because the card doesn't seem to like
being reprogrammed while a DMA transfer is in
progress.
*/
struct comedi_subdevice *s = dev->subdevices + 0;
devpriv->ai_act_scan = 0;
devpriv->neverending_ai = 0;
pcl818_ai_cancel(dev, s);
}
outb(0, dev->iobase + PCL818_CLRINT); /* clear INT request */
return IRQ_HANDLED;
}
switch (devpriv->ai_mode) {
case INT_TYPE_AI1_DMA:
case INT_TYPE_AI3_DMA:
return interrupt_pcl818_ai_mode13_dma(irq, d);
case INT_TYPE_AI1_INT:
case INT_TYPE_AI3_INT:
return interrupt_pcl818_ai_mode13_int(irq, d);
case INT_TYPE_AI1_FIFO:
case INT_TYPE_AI3_FIFO:
return interrupt_pcl818_ai_mode13_fifo(irq, d);
#ifdef PCL818_MODE13_AO
case INT_TYPE_AO1_INT:
case INT_TYPE_AO3_INT:
return interrupt_pcl818_ao_mode13_int(irq, d);
#endif
default:
break;
}
outb(0, dev->iobase + PCL818_CLRINT); /* clear INT request */
if ((!dev->irq) || (!devpriv->irq_free) || (!devpriv->irq_blocked)
|| (!devpriv->ai_mode)) {
comedi_error(dev, "bad IRQ!");
return IRQ_NONE;
}
comedi_error(dev, "IRQ from unknown source!");
return IRQ_NONE;
}
/*
==============================================================================
ANALOG INPUT MODE 1 or 3 DMA , 818 cards
*/
static void pcl818_ai_mode13dma_int(int mode, struct comedi_device *dev,
struct comedi_subdevice *s)
{
unsigned int flags;
unsigned int bytes;
printk("mode13dma_int, mode: %d\n", mode);
disable_dma(devpriv->dma); /* disable dma */
bytes = devpriv->hwdmasize[0];
if (!devpriv->neverending_ai) {
bytes = devpriv->ai_n_chan * devpriv->ai_scans * sizeof(short); /* how many */
devpriv->dma_runs_to_end = bytes / devpriv->hwdmasize[0]; /* how many DMA pages we must fiil */
devpriv->last_dma_run = bytes % devpriv->hwdmasize[0]; /* on last dma transfer must be moved */
devpriv->dma_runs_to_end--;
if (devpriv->dma_runs_to_end >= 0)
bytes = devpriv->hwdmasize[0];
}
devpriv->next_dma_buf = 0;
set_dma_mode(devpriv->dma, DMA_MODE_READ);
flags = claim_dma_lock();
clear_dma_ff(devpriv->dma);
set_dma_addr(devpriv->dma, devpriv->hwdmaptr[0]);
set_dma_count(devpriv->dma, bytes);
release_dma_lock(flags);
enable_dma(devpriv->dma);
if (mode == 1) {
devpriv->ai_mode = INT_TYPE_AI1_DMA;
outb(0x87 | (dev->irq << 4), dev->iobase + PCL818_CONTROL); /* Pacer+IRQ+DMA */
} else {
devpriv->ai_mode = INT_TYPE_AI3_DMA;
outb(0x86 | (dev->irq << 4), dev->iobase + PCL818_CONTROL); /* Ext trig+IRQ+DMA */
};
}
#ifdef unused
/*
==============================================================================
ANALOG INPUT MODE 1 or 3 DMA rtc, 818 cards
*/
static void pcl818_ai_mode13dma_rtc(int mode, struct comedi_device *dev,
struct comedi_subdevice *s)
{
unsigned int flags;
short *pole;
set_dma_mode(devpriv->dma, DMA_MODE_READ | DMA_AUTOINIT);
flags = claim_dma_lock();
clear_dma_ff(devpriv->dma);
set_dma_addr(devpriv->dma, devpriv->hwdmaptr[0]);
set_dma_count(devpriv->dma, devpriv->hwdmasize[0]);
release_dma_lock(flags);
enable_dma(devpriv->dma);
devpriv->last_top_dma = 0; /* devpriv->hwdmasize[0]; */
pole = (short *)devpriv->dmabuf[0];
devpriv->dmasamplsize = devpriv->hwdmasize[0] / 2;
pole[devpriv->dmasamplsize - 1] = MAGIC_DMA_WORD;
#ifdef unused
devpriv->rtc_freq = rtc_setfreq_irq(2048);
devpriv->rtc_irq_timer.expires =
jiffies + HZ / devpriv->rtc_freq + 2 * HZ / 100;
devpriv->rtc_irq_timer.data = (unsigned long)dev;
devpriv->rtc_irq_timer.function = rtc_dropped_irq;
add_timer(&devpriv->rtc_irq_timer);
#endif
if (mode == 1) {
devpriv->int818_mode = INT_TYPE_AI1_DMA_RTC;
outb(0x07 | (dev->irq << 4), dev->iobase + PCL818_CONTROL); /* Pacer+DMA */
} else {
devpriv->int818_mode = INT_TYPE_AI3_DMA_RTC;
outb(0x06 | (dev->irq << 4), dev->iobase + PCL818_CONTROL); /* Ext trig+DMA */
};
}
#endif
/*
==============================================================================
ANALOG INPUT MODE 1 or 3, 818 cards
*/
static int pcl818_ai_cmd_mode(int mode, struct comedi_device *dev,
struct comedi_subdevice *s)
{
struct comedi_cmd *cmd = &s->async->cmd;
int divisor1 = 0, divisor2 = 0;
unsigned int seglen;
printk("pcl818_ai_cmd_mode()\n");
if ((!dev->irq) && (!devpriv->dma_rtc)) {
comedi_error(dev, "IRQ not defined!");
return -EINVAL;
}
if (devpriv->irq_blocked)
return -EBUSY;
start_pacer(dev, -1, 0, 0); /* stop pacer */
seglen = check_channel_list(dev, s, devpriv->ai_chanlist,
devpriv->ai_n_chan);
if (seglen < 1)
return -EINVAL;
setup_channel_list(dev, s, devpriv->ai_chanlist,
devpriv->ai_n_chan, seglen);
udelay(1);
devpriv->ai_act_scan = devpriv->ai_scans;
devpriv->ai_act_chan = 0;
devpriv->irq_blocked = 1;
devpriv->irq_was_now_closed = 0;
devpriv->neverending_ai = 0;
devpriv->act_chanlist_pos = 0;
devpriv->dma_runs_to_end = 0;
if ((devpriv->ai_scans == 0) || (devpriv->ai_scans == -1))
devpriv->neverending_ai = 1; /* well, user want neverending */
if (mode == 1) {
i8253_cascade_ns_to_timer(devpriv->i8253_osc_base, &divisor1,
&divisor2, &cmd->convert_arg,
TRIG_ROUND_NEAREST);
if (divisor1 == 1) { /* PCL718/818 crash if any divisor is set to 1 */
divisor1 = 2;
divisor2 /= 2;
}
if (divisor2 == 1) {
divisor2 = 2;
divisor1 /= 2;
}
}
outb(0, dev->iobase + PCL818_CNTENABLE); /* enable pacer */
switch (devpriv->dma) {
case 1: /* DMA */
case 3:
if (devpriv->dma_rtc == 0) {
pcl818_ai_mode13dma_int(mode, dev, s);
}
#ifdef unused
else {
pcl818_ai_mode13dma_rtc(mode, dev, s);
}
#else
else {
return -EINVAL;
}
#endif
break;
case 0:
if (!devpriv->usefifo) {
/* IRQ */
/* printk("IRQ\n"); */
if (mode == 1) {
devpriv->ai_mode = INT_TYPE_AI1_INT;
/* Pacer+IRQ */
outb(0x83 | (dev->irq << 4),
dev->iobase + PCL818_CONTROL);
} else {
devpriv->ai_mode = INT_TYPE_AI3_INT;
/* Ext trig+IRQ */
outb(0x82 | (dev->irq << 4),
dev->iobase + PCL818_CONTROL);
}
} else {
/* FIFO */
/* enable FIFO */
outb(1, dev->iobase + PCL818_FI_ENABLE);
if (mode == 1) {
devpriv->ai_mode = INT_TYPE_AI1_FIFO;
/* Pacer */
outb(0x03, dev->iobase + PCL818_CONTROL);
} else {
devpriv->ai_mode = INT_TYPE_AI3_FIFO;
outb(0x02, dev->iobase + PCL818_CONTROL);
}
}
}
start_pacer(dev, mode, divisor1, divisor2);
#ifdef unused
switch (devpriv->ai_mode) {
case INT_TYPE_AI1_DMA_RTC:
case INT_TYPE_AI3_DMA_RTC:
set_rtc_irq_bit(1); /* start RTC */
break;
}
#endif
printk("pcl818_ai_cmd_mode() end\n");
return 0;
}
#ifdef unused
/*
==============================================================================
ANALOG OUTPUT MODE 1 or 3, 818 cards
*/
#ifdef PCL818_MODE13_AO
static int pcl818_ao_mode13(int mode, struct comedi_device *dev,
struct comedi_subdevice *s, comedi_trig * it)
{
int divisor1 = 0, divisor2 = 0;
if (!dev->irq) {
comedi_error(dev, "IRQ not defined!");
return -EINVAL;
}
if (devpriv->irq_blocked)
return -EBUSY;
start_pacer(dev, -1, 0, 0); /* stop pacer */
devpriv->int13_act_scan = it->n;
devpriv->int13_act_chan = 0;
devpriv->irq_blocked = 1;
devpriv->irq_was_now_closed = 0;
devpriv->neverending_ai = 0;
devpriv->act_chanlist_pos = 0;
if (mode == 1) {
i8253_cascade_ns_to_timer(devpriv->i8253_osc_base, &divisor1,
&divisor2, &it->trigvar,
TRIG_ROUND_NEAREST);
if (divisor1 == 1) { /* PCL818 crash if any divisor is set to 1 */
divisor1 = 2;
divisor2 /= 2;
}
if (divisor2 == 1) {
divisor2 = 2;
divisor1 /= 2;
}
}
outb(0, dev->iobase + PCL818_CNTENABLE); /* enable pacer */
if (mode == 1) {
devpriv->int818_mode = INT_TYPE_AO1_INT;
outb(0x83 | (dev->irq << 4), dev->iobase + PCL818_CONTROL); /* Pacer+IRQ */
} else {
devpriv->int818_mode = INT_TYPE_AO3_INT;
outb(0x82 | (dev->irq << 4), dev->iobase + PCL818_CONTROL); /* Ext trig+IRQ */
};
start_pacer(dev, mode, divisor1, divisor2);
return 0;
}
/*
==============================================================================
ANALOG OUTPUT MODE 1, 818 cards
*/
static int pcl818_ao_mode1(struct comedi_device *dev,
struct comedi_subdevice *s, comedi_trig * it)
{
return pcl818_ao_mode13(1, dev, s, it);
}
/*
==============================================================================
ANALOG OUTPUT MODE 3, 818 cards
*/
static int pcl818_ao_mode3(struct comedi_device *dev,
struct comedi_subdevice *s, comedi_trig * it)
{
return pcl818_ao_mode13(3, dev, s, it);
}
#endif
#endif
/*
==============================================================================
Start/stop pacer onboard pacer
*/
static void start_pacer(struct comedi_device *dev, int mode,
unsigned int divisor1, unsigned int divisor2)
{
outb(0xb4, dev->iobase + PCL818_CTRCTL);
outb(0x74, dev->iobase + PCL818_CTRCTL);
udelay(1);
if (mode == 1) {
outb(divisor2 & 0xff, dev->iobase + PCL818_CTR2);
outb((divisor2 >> 8) & 0xff, dev->iobase + PCL818_CTR2);
outb(divisor1 & 0xff, dev->iobase + PCL818_CTR1);
outb((divisor1 >> 8) & 0xff, dev->iobase + PCL818_CTR1);
}
}
/*
==============================================================================
Check if channel list from user is builded correctly
If it's ok, then program scan/gain logic
*/
static int check_channel_list(struct comedi_device *dev,
struct comedi_subdevice *s,
unsigned int *chanlist, unsigned int n_chan)
{
unsigned int chansegment[16];
unsigned int i, nowmustbechan, seglen, segpos;
/* correct channel and range number check itself comedi/range.c */
if (n_chan < 1) {
comedi_error(dev, "range/channel list is empty!");
return 0;
}
if (n_chan > 1) {
/* first channel is everytime ok */
chansegment[0] = chanlist[0];
/* build part of chanlist */
for (i = 1, seglen = 1; i < n_chan; i++, seglen++) {
/* printk("%d. %d * %d\n",i,
* CR_CHAN(it->chanlist[i]),CR_RANGE(it->chanlist[i]));*/
/* we detect loop, this must by finish */
if (chanlist[0] == chanlist[i])
break;
nowmustbechan =
(CR_CHAN(chansegment[i - 1]) + 1) % s->n_chan;
if (nowmustbechan != CR_CHAN(chanlist[i])) { /* channel list isn't continous :-( */
printk
("comedi%d: pcl818: channel list must be continous! chanlist[%i]=%d but must be %d or %d!\n",
dev->minor, i, CR_CHAN(chanlist[i]),
nowmustbechan, CR_CHAN(chanlist[0]));
return 0;
}
/* well, this is next correct channel in list */
chansegment[i] = chanlist[i];
}
/* check whole chanlist */
for (i = 0, segpos = 0; i < n_chan; i++) {
/* printk("%d %d=%d %d\n",CR_CHAN(chansegment[i%seglen]),CR_RANGE(chansegment[i%seglen]),CR_CHAN(it->chanlist[i]),CR_RANGE(it->chanlist[i])); */
if (chanlist[i] != chansegment[i % seglen]) {
printk
("comedi%d: pcl818: bad channel or range number! chanlist[%i]=%d,%d,%d and not %d,%d,%d!\n",
dev->minor, i, CR_CHAN(chansegment[i]),
CR_RANGE(chansegment[i]),
CR_AREF(chansegment[i]),
CR_CHAN(chanlist[i % seglen]),
CR_RANGE(chanlist[i % seglen]),
CR_AREF(chansegment[i % seglen]));
return 0; /* chan/gain list is strange */
}
}
} else {
seglen = 1;
}
printk("check_channel_list: seglen %d\n", seglen);
return seglen;
}
static void setup_channel_list(struct comedi_device *dev,
struct comedi_subdevice *s,
unsigned int *chanlist, unsigned int n_chan,
unsigned int seglen)
{
int i;
devpriv->act_chanlist_len = seglen;
devpriv->act_chanlist_pos = 0;
for (i = 0; i < seglen; i++) { /* store range list to card */
devpriv->act_chanlist[i] = CR_CHAN(chanlist[i]);
outb(muxonechan[CR_CHAN(chanlist[i])], dev->iobase + PCL818_MUX); /* select channel */
outb(CR_RANGE(chanlist[i]), dev->iobase + PCL818_RANGE); /* select gain */
}
udelay(1);
/* select channel interval to scan */
outb(devpriv->act_chanlist[0] | (devpriv->act_chanlist[seglen -
1] << 4),
dev->iobase + PCL818_MUX);
}
/*
==============================================================================
Check if board is switched to SE (1) or DIFF(0) mode
*/
static int check_single_ended(unsigned int port)
{
if (inb(port + PCL818_STATUS) & 0x20) {
return 1;
} else {
return 0;
}
}
/*
==============================================================================
*/
static int ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_cmd *cmd)
{
int err = 0;
int tmp, divisor1 = 0, divisor2 = 0;
/* step 1: make sure trigger sources are trivially valid */
tmp = cmd->start_src;
cmd->start_src &= TRIG_NOW;
if (!cmd->start_src || tmp != cmd->start_src)
err++;
tmp = cmd->scan_begin_src;
cmd->scan_begin_src &= TRIG_FOLLOW;
if (!cmd->scan_begin_src || tmp != cmd->scan_begin_src)
err++;
tmp = cmd->convert_src;
cmd->convert_src &= TRIG_TIMER | TRIG_EXT;
if (!cmd->convert_src || tmp != cmd->convert_src)
err++;
tmp = cmd->scan_end_src;
cmd->scan_end_src &= TRIG_COUNT;
if (!cmd->scan_end_src || tmp != cmd->scan_end_src)
err++;
tmp = cmd->stop_src;
cmd->stop_src &= TRIG_COUNT | TRIG_NONE;
if (!cmd->stop_src || tmp != cmd->stop_src)
err++;
if (err) {
return 1;
}
/* step 2: make sure trigger sources are unique and mutually compatible */
if (cmd->start_src != TRIG_NOW) {
cmd->start_src = TRIG_NOW;
err++;
}
if (cmd->scan_begin_src != TRIG_FOLLOW) {
cmd->scan_begin_src = TRIG_FOLLOW;
err++;
}
if (cmd->convert_src != TRIG_TIMER && cmd->convert_src != TRIG_EXT)
err++;
if (cmd->scan_end_src != TRIG_COUNT) {
cmd->scan_end_src = TRIG_COUNT;
err++;
}
if (cmd->stop_src != TRIG_NONE && cmd->stop_src != TRIG_COUNT)
err++;
if (err) {
return 2;
}
/* step 3: make sure arguments are trivially compatible */
if (cmd->start_arg != 0) {
cmd->start_arg = 0;
err++;
}
if (cmd->scan_begin_arg != 0) {
cmd->scan_begin_arg = 0;
err++;
}
if (cmd->convert_src == TRIG_TIMER) {
if (cmd->convert_arg < this_board->ns_min) {
cmd->convert_arg = this_board->ns_min;
err++;
}
} else { /* TRIG_EXT */
if (cmd->convert_arg != 0) {
cmd->convert_arg = 0;
err++;
}
}
if (cmd->scan_end_arg != cmd->chanlist_len) {
cmd->scan_end_arg = cmd->chanlist_len;
err++;
}
if (cmd->stop_src == TRIG_COUNT) {
if (!cmd->stop_arg) {
cmd->stop_arg = 1;
err++;
}
} else { /* TRIG_NONE */
if (cmd->stop_arg != 0) {
cmd->stop_arg = 0;
err++;
}
}
if (err) {
return 3;
}
/* step 4: fix up any arguments */
if (cmd->convert_src == TRIG_TIMER) {
tmp = cmd->convert_arg;
i8253_cascade_ns_to_timer(devpriv->i8253_osc_base, &divisor1,
&divisor2, &cmd->convert_arg,
cmd->flags & TRIG_ROUND_MASK);
if (cmd->convert_arg < this_board->ns_min)
cmd->convert_arg = this_board->ns_min;
if (tmp != cmd->convert_arg)
err++;
}
if (err) {
return 4;
}
/* step 5: complain about special chanlist considerations */
if (cmd->chanlist) {
if (!check_channel_list(dev, s, cmd->chanlist,
cmd->chanlist_len))
return 5; /* incorrect channels list */
}
return 0;
}
/*
==============================================================================
*/
static int ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
{
struct comedi_cmd *cmd = &s->async->cmd;
int retval;
printk("pcl818_ai_cmd()\n");
devpriv->ai_n_chan = cmd->chanlist_len;
devpriv->ai_chanlist = cmd->chanlist;
devpriv->ai_flags = cmd->flags;
devpriv->ai_data_len = s->async->prealloc_bufsz;
devpriv->ai_data = s->async->prealloc_buf;
devpriv->ai_timer1 = 0;
devpriv->ai_timer2 = 0;
if (cmd->stop_src == TRIG_COUNT) {
devpriv->ai_scans = cmd->stop_arg;
} else {
devpriv->ai_scans = 0;
}
if (cmd->scan_begin_src == TRIG_FOLLOW) { /* mode 1, 3 */
if (cmd->convert_src == TRIG_TIMER) { /* mode 1 */
devpriv->ai_timer1 = cmd->convert_arg;
retval = pcl818_ai_cmd_mode(1, dev, s);
printk("pcl818_ai_cmd() end\n");
return retval;
}
if (cmd->convert_src == TRIG_EXT) { /* mode 3 */
return pcl818_ai_cmd_mode(3, dev, s);
}
}
return -1;
}
/*
==============================================================================
cancel any mode 1-4 AI
*/
static int pcl818_ai_cancel(struct comedi_device *dev,
struct comedi_subdevice *s)
{
if (devpriv->irq_blocked > 0) {
printk("pcl818_ai_cancel()\n");
devpriv->irq_was_now_closed = 1;
switch (devpriv->ai_mode) {
#ifdef unused
case INT_TYPE_AI1_DMA_RTC:
case INT_TYPE_AI3_DMA_RTC:
set_rtc_irq_bit(0); /* stop RTC */
del_timer(&devpriv->rtc_irq_timer);
#endif
case INT_TYPE_AI1_DMA:
case INT_TYPE_AI3_DMA:
if (devpriv->neverending_ai ||
(!devpriv->neverending_ai &&
devpriv->ai_act_scan > 0)) {
/* wait for running dma transfer to end, do cleanup in interrupt */
goto end;
}
disable_dma(devpriv->dma);
case INT_TYPE_AI1_INT:
case INT_TYPE_AI3_INT:
case INT_TYPE_AI1_FIFO:
case INT_TYPE_AI3_FIFO:
#ifdef PCL818_MODE13_AO
case INT_TYPE_AO1_INT:
case INT_TYPE_AO3_INT:
#endif
outb(inb(dev->iobase + PCL818_CONTROL) & 0x73, dev->iobase + PCL818_CONTROL); /* Stop A/D */
udelay(1);
start_pacer(dev, -1, 0, 0);
outb(0, dev->iobase + PCL818_AD_LO);
inb(dev->iobase + PCL818_AD_LO);
inb(dev->iobase + PCL818_AD_HI);
outb(0, dev->iobase + PCL818_CLRINT); /* clear INT request */
outb(0, dev->iobase + PCL818_CONTROL); /* Stop A/D */
if (devpriv->usefifo) { /* FIFO shutdown */
outb(0, dev->iobase + PCL818_FI_INTCLR);
outb(0, dev->iobase + PCL818_FI_FLUSH);
outb(0, dev->iobase + PCL818_FI_ENABLE);
}
devpriv->irq_blocked = 0;
devpriv->last_int_sub = s;
devpriv->neverending_ai = 0;
devpriv->ai_mode = 0;
devpriv->irq_was_now_closed = 0;
break;
}
}
end:
printk("pcl818_ai_cancel() end\n");
return 0;
}
/*
==============================================================================
chech for PCL818
*/
static int pcl818_check(unsigned long iobase)
{
outb(0x00, iobase + PCL818_MUX);
udelay(1);
if (inb(iobase + PCL818_MUX) != 0x00)
return 1; /* there isn't card */
outb(0x55, iobase + PCL818_MUX);
udelay(1);
if (inb(iobase + PCL818_MUX) != 0x55)
return 1; /* there isn't card */
outb(0x00, iobase + PCL818_MUX);
udelay(1);
outb(0x18, iobase + PCL818_CONTROL);
udelay(1);
if (inb(iobase + PCL818_CONTROL) != 0x18)
return 1; /* there isn't card */
return 0; /* ok, card exist */
}
/*
==============================================================================
reset whole PCL-818 cards
*/
static void pcl818_reset(struct comedi_device *dev)
{
if (devpriv->usefifo) { /* FIFO shutdown */
outb(0, dev->iobase + PCL818_FI_INTCLR);
outb(0, dev->iobase + PCL818_FI_FLUSH);
outb(0, dev->iobase + PCL818_FI_ENABLE);
}
outb(0, dev->iobase + PCL818_DA_LO); /* DAC=0V */
outb(0, dev->iobase + PCL818_DA_HI);
udelay(1);
outb(0, dev->iobase + PCL818_DO_HI); /* DO=$0000 */
outb(0, dev->iobase + PCL818_DO_LO);
udelay(1);
outb(0, dev->iobase + PCL818_CONTROL);
outb(0, dev->iobase + PCL818_CNTENABLE);
outb(0, dev->iobase + PCL818_MUX);
outb(0, dev->iobase + PCL818_CLRINT);
outb(0xb0, dev->iobase + PCL818_CTRCTL); /* Stop pacer */
outb(0x70, dev->iobase + PCL818_CTRCTL);
outb(0x30, dev->iobase + PCL818_CTRCTL);
if (this_board->is_818) {
outb(0, dev->iobase + PCL818_RANGE);
} else {
outb(0, dev->iobase + PCL718_DA2_LO);
outb(0, dev->iobase + PCL718_DA2_HI);
}
}
#ifdef unused
/*
==============================================================================
Enable(1)/disable(0) periodic interrupts from RTC
*/
static int set_rtc_irq_bit(unsigned char bit)
{
unsigned char val;
unsigned long flags;
if (bit == 1) {
RTC_timer_lock++;
if (RTC_timer_lock > 1)
return 0;
} else {
RTC_timer_lock--;
if (RTC_timer_lock < 0)
RTC_timer_lock = 0;
if (RTC_timer_lock > 0)
return 0;
}
save_flags(flags);
cli();
val = CMOS_READ(RTC_CONTROL);
if (bit) {
val |= RTC_PIE;
} else {
val &= ~RTC_PIE;
}
CMOS_WRITE(val, RTC_CONTROL);
CMOS_READ(RTC_INTR_FLAGS);
restore_flags(flags);
return 0;
}
/*
==============================================================================
Restart RTC if something stop it (xntpd every 11 mins or large IDE transfers)
*/
static void rtc_dropped_irq(unsigned long data)
{
struct comedi_device *dev = (void *)data;
unsigned long flags, tmp;
switch (devpriv->int818_mode) {
case INT_TYPE_AI1_DMA_RTC:
case INT_TYPE_AI3_DMA_RTC:
mod_timer(&devpriv->rtc_irq_timer,
jiffies + HZ / devpriv->rtc_freq + 2 * HZ / 100);
save_flags(flags);
cli();
tmp = (CMOS_READ(RTC_INTR_FLAGS) & 0xF0); /* restart */
restore_flags(flags);
break;
};
}
/*
==============================================================================
Set frequency of interrupts from RTC
*/
static int rtc_setfreq_irq(int freq)
{
int tmp = 0;
int rtc_freq;
unsigned char val;
unsigned long flags;
if (freq < 2)
freq = 2;
if (freq > 8192)
freq = 8192;
while (freq > (1 << tmp))
tmp++;
rtc_freq = 1 << tmp;
save_flags(flags);
cli();
val = CMOS_READ(RTC_FREQ_SELECT) & 0xf0;
val |= (16 - tmp);
CMOS_WRITE(val, RTC_FREQ_SELECT);
restore_flags(flags);
return rtc_freq;
}
#endif
/*
==============================================================================
Free any resources that we have claimed
*/
static void free_resources(struct comedi_device *dev)
{
/* printk("free_resource()\n"); */
if (dev->private) {
pcl818_ai_cancel(dev, devpriv->sub_ai);
pcl818_reset(dev);
if (devpriv->dma)
free_dma(devpriv->dma);
if (devpriv->dmabuf[0])
free_pages(devpriv->dmabuf[0], devpriv->dmapages[0]);
if (devpriv->dmabuf[1])
free_pages(devpriv->dmabuf[1], devpriv->dmapages[1]);
#ifdef unused
if (devpriv->rtc_irq)
free_irq(devpriv->rtc_irq, dev);
if ((devpriv->dma_rtc) && (RTC_lock == 1)) {
if (devpriv->rtc_iobase)
release_region(devpriv->rtc_iobase,
devpriv->rtc_iosize);
}
if (devpriv->dma_rtc)
RTC_lock--;
#endif
}
if (dev->irq)
free_irq(dev->irq, dev);
if (dev->iobase)
release_region(dev->iobase, devpriv->io_range);
/* printk("free_resource() end\n"); */
}
/*
==============================================================================
Initialization
*/
static int pcl818_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
int ret;
unsigned long iobase;
unsigned int irq;
int dma;
unsigned long pages;
struct comedi_subdevice *s;
ret = alloc_private(dev, sizeof(struct pcl818_private));
if (ret < 0)
return ret; /* Can't alloc mem */
/* claim our I/O space */
iobase = it->options[0];
printk("comedi%d: pcl818: board=%s, ioport=0x%03lx",
dev->minor, this_board->name, iobase);
devpriv->io_range = this_board->io_range;
if ((this_board->fifo) && (it->options[2] == -1)) { /* we've board with FIFO and we want to use FIFO */
devpriv->io_range = PCLx1xFIFO_RANGE;
devpriv->usefifo = 1;
}
if (!request_region(iobase, devpriv->io_range, "pcl818")) {
printk("I/O port conflict\n");
return -EIO;
}
dev->iobase = iobase;
if (pcl818_check(iobase)) {
printk(", I can't detect board. FAIL!\n");
return -EIO;
}
/* set up some name stuff */
dev->board_name = this_board->name;
/* grab our IRQ */
irq = 0;
if (this_board->IRQbits != 0) { /* board support IRQ */
irq = it->options[1];
if (irq) { /* we want to use IRQ */
if (((1 << irq) & this_board->IRQbits) == 0) {
printk
(", IRQ %u is out of allowed range, DISABLING IT",
irq);
irq = 0; /* Bad IRQ */
} else {
if (request_irq
(irq, interrupt_pcl818, 0, "pcl818", dev)) {
printk
(", unable to allocate IRQ %u, DISABLING IT",
irq);
irq = 0; /* Can't use IRQ */
} else {
printk(", irq=%u", irq);
}
}
}
}
dev->irq = irq;
if (irq) {
devpriv->irq_free = 1;
} /* 1=we have allocated irq */
else {
devpriv->irq_free = 0;
}
devpriv->irq_blocked = 0; /* number of subdevice which use IRQ */
devpriv->ai_mode = 0; /* mode of irq */
#ifdef unused
/* grab RTC for DMA operations */
devpriv->dma_rtc = 0;
if (it->options[2] > 0) { /* we want to use DMA */
if (RTC_lock == 0) {
if (!request_region(RTC_PORT(0), RTC_IO_EXTENT,
"pcl818 (RTC)"))
goto no_rtc;
}
devpriv->rtc_iobase = RTC_PORT(0);
devpriv->rtc_iosize = RTC_IO_EXTENT;
RTC_lock++;
if (!request_irq(RTC_IRQ, interrupt_pcl818_ai_mode13_dma_rtc, 0,
"pcl818 DMA (RTC)", dev)) {
devpriv->dma_rtc = 1;
devpriv->rtc_irq = RTC_IRQ;
printk(", dma_irq=%u", devpriv->rtc_irq);
} else {
RTC_lock--;
if (RTC_lock == 0) {
if (devpriv->rtc_iobase)
release_region(devpriv->rtc_iobase,
devpriv->rtc_iosize);
}
devpriv->rtc_iobase = 0;
devpriv->rtc_iosize = 0;
}
}
no_rtc:
#endif
/* grab our DMA */
dma = 0;
devpriv->dma = dma;
if ((devpriv->irq_free == 0) && (devpriv->dma_rtc == 0))
goto no_dma; /* if we haven't IRQ, we can't use DMA */
if (this_board->DMAbits != 0) { /* board support DMA */
dma = it->options[2];
if (dma < 1)
goto no_dma; /* DMA disabled */
if (((1 << dma) & this_board->DMAbits) == 0) {
printk(", DMA is out of allowed range, FAIL!\n");
return -EINVAL; /* Bad DMA */
}
ret = request_dma(dma, "pcl818");
if (ret) {
printk(", unable to allocate DMA %u, FAIL!\n", dma);
return -EBUSY; /* DMA isn't free */
}
devpriv->dma = dma;
printk(", dma=%u", dma);
pages = 2; /* we need 16KB */
devpriv->dmabuf[0] = __get_dma_pages(GFP_KERNEL, pages);
if (!devpriv->dmabuf[0]) {
printk(", unable to allocate DMA buffer, FAIL!\n");
/* maybe experiment with try_to_free_pages() will help .... */
return -EBUSY; /* no buffer :-( */
}
devpriv->dmapages[0] = pages;
devpriv->hwdmaptr[0] = virt_to_bus((void *)devpriv->dmabuf[0]);
devpriv->hwdmasize[0] = (1 << pages) * PAGE_SIZE;
/* printk("%d %d %ld, ",devpriv->dmapages[0],devpriv->hwdmasize[0],PAGE_SIZE); */
if (devpriv->dma_rtc == 0) { /* we must do duble buff :-( */
devpriv->dmabuf[1] = __get_dma_pages(GFP_KERNEL, pages);
if (!devpriv->dmabuf[1]) {
printk
(", unable to allocate DMA buffer, FAIL!\n");
return -EBUSY;
}
devpriv->dmapages[1] = pages;
devpriv->hwdmaptr[1] =
virt_to_bus((void *)devpriv->dmabuf[1]);
devpriv->hwdmasize[1] = (1 << pages) * PAGE_SIZE;
}
}
no_dma:
ret = alloc_subdevices(dev, 4);
if (ret < 0)
return ret;
s = dev->subdevices + 0;
if (!this_board->n_aichan_se) {
s->type = COMEDI_SUBD_UNUSED;
} else {
s->type = COMEDI_SUBD_AI;
devpriv->sub_ai = s;
s->subdev_flags = SDF_READABLE;
if (check_single_ended(dev->iobase)) {
s->n_chan = this_board->n_aichan_se;
s->subdev_flags |= SDF_COMMON | SDF_GROUND;
printk(", %dchans S.E. DAC", s->n_chan);
} else {
s->n_chan = this_board->n_aichan_diff;
s->subdev_flags |= SDF_DIFF;
printk(", %dchans DIFF DAC", s->n_chan);
}
s->maxdata = this_board->ai_maxdata;
s->len_chanlist = s->n_chan;
s->range_table = this_board->ai_range_type;
s->cancel = pcl818_ai_cancel;
s->insn_read = pcl818_ai_insn_read;
if ((irq) || (devpriv->dma_rtc)) {
dev->read_subdev = s;
s->subdev_flags |= SDF_CMD_READ;
s->do_cmdtest = ai_cmdtest;
s->do_cmd = ai_cmd;
}
if (this_board->is_818) {
if ((it->options[4] == 1) || (it->options[4] == 10))
s->range_table = &range_pcl818l_h_ai; /* secondary range list jumper selectable */
} else {
switch (it->options[4]) {
case 0:
s->range_table = &range_bipolar10;
break;
case 1:
s->range_table = &range_bipolar5;
break;
case 2:
s->range_table = &range_bipolar2_5;
break;
case 3:
s->range_table = &range718_bipolar1;
break;
case 4:
s->range_table = &range718_bipolar0_5;
break;
case 6:
s->range_table = &range_unipolar10;
break;
case 7:
s->range_table = &range_unipolar5;
break;
case 8:
s->range_table = &range718_unipolar2;
break;
case 9:
s->range_table = &range718_unipolar1;
break;
default:
s->range_table = &range_unknown;
break;
}
}
}
s = dev->subdevices + 1;
if (!this_board->n_aochan) {
s->type = COMEDI_SUBD_UNUSED;
} else {
s->type = COMEDI_SUBD_AO;
s->subdev_flags = SDF_WRITABLE | SDF_GROUND;
s->n_chan = this_board->n_aochan;
s->maxdata = this_board->ao_maxdata;
s->len_chanlist = this_board->n_aochan;
s->range_table = this_board->ao_range_type;
s->insn_read = pcl818_ao_insn_read;
s->insn_write = pcl818_ao_insn_write;
#ifdef unused
#ifdef PCL818_MODE13_AO
if (irq) {
s->trig[1] = pcl818_ao_mode1;
s->trig[3] = pcl818_ao_mode3;
}
#endif
#endif
if (this_board->is_818) {
if ((it->options[4] == 1) || (it->options[4] == 10))
s->range_table = &range_unipolar10;
if (it->options[4] == 2)
s->range_table = &range_unknown;
} else {
if ((it->options[5] == 1) || (it->options[5] == 10))
s->range_table = &range_unipolar10;
if (it->options[5] == 2)
s->range_table = &range_unknown;
}
}
s = dev->subdevices + 2;
if (!this_board->n_dichan) {
s->type = COMEDI_SUBD_UNUSED;
} else {
s->type = COMEDI_SUBD_DI;
s->subdev_flags = SDF_READABLE;
s->n_chan = this_board->n_dichan;
s->maxdata = 1;
s->len_chanlist = this_board->n_dichan;
s->range_table = &range_digital;
s->insn_bits = pcl818_di_insn_bits;
}
s = dev->subdevices + 3;
if (!this_board->n_dochan) {
s->type = COMEDI_SUBD_UNUSED;
} else {
s->type = COMEDI_SUBD_DO;
s->subdev_flags = SDF_WRITABLE;
s->n_chan = this_board->n_dochan;
s->maxdata = 1;
s->len_chanlist = this_board->n_dochan;
s->range_table = &range_digital;
s->insn_bits = pcl818_do_insn_bits;
}
/* select 1/10MHz oscilator */
if ((it->options[3] == 0) || (it->options[3] == 10)) {
devpriv->i8253_osc_base = 100;
} else {
devpriv->i8253_osc_base = 1000;
}
/* max sampling speed */
devpriv->ns_min = this_board->ns_min;
if (!this_board->is_818) {
if ((it->options[6] == 1) || (it->options[6] == 100))
devpriv->ns_min = 10000; /* extended PCL718 to 100kHz DAC */
}
pcl818_reset(dev);
printk("\n");
return 0;
}
/*
==============================================================================
Removes device
*/
static int pcl818_detach(struct comedi_device *dev)
{
/* printk("comedi%d: pcl818: remove\n", dev->minor); */
free_resources(dev);
return 0;
}
MODULE_AUTHOR("Comedi http://www.comedi.org");
MODULE_DESCRIPTION("Comedi low-level driver");
MODULE_LICENSE("GPL");