| config SND_BF5XX_I2S | |
| tristate "SoC I2S Audio for the ADI BF5xx chip" | |
| depends on BLACKFIN | |
| help | |
| Say Y or M if you want to add support for codecs attached to | |
| the Blackfin SPORT (synchronous serial ports) interface in I2S | |
| mode (supports single stereo In/Out). | |
| You will also need to select the audio interfaces to support below. | |
| config SND_BF5XX_SOC_SSM2602 | |
| tristate "SoC SSM2602 Audio support for BF52x ezkit" | |
| depends on SND_BF5XX_I2S | |
| select SND_BF5XX_SOC_I2S | |
| select SND_SOC_SSM2602 | |
| select I2C | |
| help | |
| Say Y if you want to add support for SoC audio on BF527-EZKIT. | |
| config SND_BF5XX_SOC_AD73311 | |
| tristate "SoC AD73311 Audio support for Blackfin" | |
| depends on SND_BF5XX_I2S | |
| select SND_BF5XX_SOC_I2S | |
| select SND_SOC_AD73311 | |
| help | |
| Say Y if you want to add support for AD73311 codec on Blackfin. | |
| config SND_BFIN_AD73311_SE | |
| int "PF pin for AD73311L Chip Select" | |
| depends on SND_BF5XX_SOC_AD73311 | |
| default 4 | |
| help | |
| Enter the GPIO used to control AD73311's SE pin. Acceptable | |
| values are 0 to 7 | |
| config SND_BF5XX_TDM | |
| tristate "SoC I2S(TDM mode) Audio for the ADI BF5xx chip" | |
| depends on (BLACKFIN && SND_SOC) | |
| help | |
| Say Y or M if you want to add support for codecs attached to | |
| the Blackfin SPORT (synchronous serial ports) interface in TDM | |
| mode. | |
| You will also need to select the audio interfaces to support below. | |
| config SND_BF5XX_SOC_AD1836 | |
| tristate "SoC AD1836 Audio support for BF5xx" | |
| depends on SND_BF5XX_TDM | |
| select SND_BF5XX_SOC_TDM | |
| select SND_SOC_AD1836 | |
| help | |
| Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT. | |
| config SND_BF5XX_SOC_AD193X | |
| tristate "SoC AD193X Audio support for Blackfin" | |
| depends on SND_BF5XX_TDM | |
| select SND_BF5XX_SOC_TDM | |
| select SND_SOC_AD193X | |
| help | |
| Say Y if you want to add support for AD193X codec on Blackfin. | |
| This driver supports AD1936, AD1937, AD1938 and AD1939. | |
| config SND_BF5XX_AC97 | |
| tristate "SoC AC97 Audio for the ADI BF5xx chip" | |
| depends on BLACKFIN | |
| help | |
| Say Y or M if you want to add support for codecs attached to | |
| the Blackfin SPORT (synchronous serial ports) interface in slot 16 | |
| mode (pseudo AC97 interface). | |
| You will also need to select the audio interfaces to support below. | |
| Note: | |
| AC97 codecs which do not implement the slot-16 mode will not function | |
| properly with this driver. This driver is known to work with the | |
| Analog Devices line of AC97 codecs. | |
| config SND_BF5XX_MMAP_SUPPORT | |
| bool "Enable MMAP Support" | |
| depends on SND_BF5XX_AC97 | |
| default y | |
| help | |
| Say y if you want AC97 driver to support mmap mode. | |
| We introduce an intermediate buffer to simulate mmap. | |
| config SND_BF5XX_MULTICHAN_SUPPORT | |
| bool "Enable Multichannel Support" | |
| depends on SND_BF5XX_AC97 | |
| default n | |
| help | |
| Say y if you want AC97 driver to support up to 5.1 channel audio. | |
| this mode will consume much more memory for DMA. | |
| config SND_BF5XX_HAVE_COLD_RESET | |
| bool "BOARD has COLD Reset GPIO" | |
| depends on SND_BF5XX_AC97 | |
| default y if BFIN548_EZKIT | |
| default n if !BFIN548_EZKIT | |
| config SND_BF5XX_RESET_GPIO_NUM | |
| int "Set a GPIO for cold reset" | |
| depends on SND_BF5XX_HAVE_COLD_RESET | |
| range 0 159 | |
| default 19 if BFIN548_EZKIT | |
| default 5 if BFIN537_STAMP | |
| default 0 | |
| help | |
| Set the correct GPIO for RESET the sound chip. | |
| config SND_BF5XX_SOC_AD1980 | |
| tristate "SoC AD1980/1 Audio support for BF5xx (Obsolete)" | |
| depends on SND_BF5XX_AC97 | |
| select SND_BF5XX_SOC_AC97 | |
| select SND_SOC_AD1980 | |
| help | |
| Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT. | |
| Warning: | |
| Because Analog Devices Inc. discontinued the ad1980 sound chip since | |
| Sep. 2009, this ad1980 driver is not maintained, tested and supported | |
| by ADI now. | |
| config SND_BF5XX_SOC_SPORT | |
| tristate | |
| config SND_BF5XX_SOC_I2S | |
| tristate | |
| select SND_BF5XX_SOC_SPORT | |
| config SND_BF5XX_SOC_TDM | |
| tristate | |
| select SND_BF5XX_SOC_SPORT | |
| config SND_BF5XX_SOC_AC97 | |
| tristate | |
| select AC97_BUS | |
| select SND_SOC_AC97_BUS | |
| select SND_BF5XX_SOC_SPORT | |
| config SND_BF5XX_SPORT_NUM | |
| int "Set a SPORT for Sound chip" | |
| depends on (SND_BF5XX_I2S || SND_BF5XX_AC97 || SND_BF5XX_TDM) | |
| range 0 3 if BF54x | |
| range 0 1 if !BF54x | |
| default 0 | |
| help | |
| Set the correct SPORT for sound chip. |