| E2fsprogs 1.42.13 (May 17, 2015) | |
| ================================ | |
| Fixed a potential buffer overflow while closing a file system in | |
| libext2fs. (CVE-2015-1572, Addresses Debian Bug: #778948) | |
| Fixed a bug which could cause e2fsck to corrupt Hurd file systems. | |
| (Addresses Debian Bug: #760275) | |
| Fixed a deadlock which occurs when using systemd and e2fsck.conf's | |
| logging feature. (Addresses Debian Bug: #775234) | |
| Fixed a bug which could cause programs using libext2's inode table | |
| scanning functions from crashing on certain corrupted file systems. | |
| (Addresses Debian Bug: #773795) | |
| Fixed dumpe2fs so it won't crash if the user doesn't specify a block | |
| device (file system). (Addresses Debian Bug: #764293) | |
| Fixed e2fsck so if it notices unexpected HTREE blocks in pass 2, it | |
| will report the correct directory inode containing the inconsistency. | |
| If e2fsck fails to grow the dir_info structure due realloc(3) not | |
| having enough memory, it will now fail with explanatory message | |
| instead of staggering on failing with a confusing internal error | |
| messages. | |
| The tune2fs program will zero out the superblock journal backup | |
| information when removing a journal from a file system. | |
| The mke2fs program now enables the large_file feature by default. | |
| Fixed a bug which could cause badblocks to crash if there are millions | |
| and millions of bad blocks. | |
| Fixed some use-after-free bug in resize2fs and e2fsck. | |
| Fixed a memory leak in tune2fs. | |
| Fixed some bigendian bugs that had crept into both indirect and extent | |
| handling inside libext2fs. | |
| Updated/fixed various man pages. | |
| Update Esperanto, German, and Spanish translations. Added Danish | |
| translation. | |
| Programmer's Notes | |
| ------------------ | |
| Fixed coverity, sparce gcc -Wall, and clang warnings/nits. | |
| Clean up some build system problems (build failures with various | |
| configure options, fix Posix portability issues, etc.) | |
| The functions ext2fs_inode_alloc_stats[2]() and | |
| ext2fs_block_alloc_stats[2]() now check the inode and block numbers | |
| passed to them, to avoid crashes caused by buggy callers. | |
| The libext2fs directory iterator will now check for an invalid | |
| directory entry length instead of possibly walking off the end of the | |
| directory buffer. | |
| E2fsprogs 1.42.12 (August 25, 2014) | |
| =================================== | |
| Fix various e2fsck bugs when trying to repair bigalloc file systems. | |
| E2fsck can now repair a file system with an overly large | |
| s_first_meta_bg field, which had previously caused all e2fsprogs | |
| programs to crash when trying to open such a file system. | |
| Fix e2fsck so that it can correctly fix a number of rare file system | |
| corruptions that were discovered when using a file system fuzzer. | |
| Fix e2fsck so it does not try to write back block group descriptors if | |
| they have not been modified. | |
| Mke2fs program will now place metadata blocks in the last flex_bg so | |
| they are contiguous. This reduces free space fragmentation in a | |
| freshly created file system, as well as allowing mke2fs commands which | |
| request extremely large flex_bg size to succeed. | |
| Mke2fs now creates hugefiles more efficiently (with fewer extent tree | |
| blocks). | |
| Fix a 32/64-bit overflow bug that could cause resize2fs to loop | |
| forever. (Addresses-Launchpad-Bug: #1321958) | |
| The resize2fs program will now use much less memory when resizing very | |
| large file systems. | |
| Fix a bug which could cause resize2fs to get confused and produce a | |
| corrupted file system when shrinking a file system that had been | |
| previously expanded and converted to use the meta_bg file system | |
| format, but which no longer needs to use the meta_bg file system | |
| format any longer. This typically happened with large (> 16TB) file | |
| systems. (Addresses Debian Bug: #756922) | |
| The e4defrag program will now defrag backwards-allocated files. | |
| Fix tune2fs updating UUID's when manipulating file systems with | |
| external journals (both the file system and journal UUID). | |
| Fix tune2fs so it can remove an external journal for file systems with | |
| a 1k block size. | |
| Add a new debugfs command, "inode_dump", which prints the inode in hex | |
| and ASCII format. | |
| The debugfs's "set_inode_field" will now automatically allocate blocks | |
| for indirect blocks and extent tree blocks. | |
| Fix debugfs's "set_inode_field" so can properly handle | |
| "block[IND|DIND|TIND]". | |
| The debugfs "rdump" command will now take multiple source arguments. | |
| Fixed a double close(2) bug in "rdump" and "rdump -p". | |
| Fix debugfs's argument parsing for the freefrag command. | |
| Fix filefrag to properly handle using the FIBMAP ioctl (with -B). | |
| (Addresses Launchpad Bug: #1356496) | |
| Clarified messages that were confusing users in debugfs, e2fsck, | |
| mke2fs, and resize2fs (Addresses Debian Bugs: #758029, #757543, | |
| #757544) | |
| Dumpe2fs will now complain if extra arguments are given to it. | |
| (Addresses Debian Bug: #758074) | |
| Updated/fixed various man pages. (Addresses-Debian-Bug: #726760) | |
| Update Czech, Dutch, French, Polish, Spanish, Sweedish, Ukrainian, and | |
| Vietnamese translations. | |
| Programmer's Notes | |
| ------------------ | |
| The Unix I/O layer will now use pread[64]/pwrite[64] to reduce the | |
| number of system calls issued. | |
| Fixed profiled build. | |
| The libext2fs library will now more efficiently split an extent tree | |
| index block when appending to an end of a file. | |
| Fixed free block accounting for 64-bit file systems. | |
| Add a new function ext2s_inode_size_set() which takes care of all of | |
| the required feature flag modifications. | |
| The regression tests no longer require the presence of the md5sum | |
| program. | |
| Fix build failure on MIPS platforms on Debian (Addresses Debian Bug: | |
| #754605) | |
| Fix various Coverity warnings (#1225003, #1229243, #1252003) | |
| E2fsprogs 1.42.11 (July 9, 2014) | |
| ================================ | |
| Add support so that mke2fs can create hugefiles so that they are | |
| aligned relative to the beginning of the disk, instead of relative to | |
| the beginning of the partition, using the mke2fs.conf configuration | |
| parameter "hugefiles_align_disk". | |
| Fix a bug which causes e2fsck to abort a journal replay on a file | |
| system with bigalloc enabled. (Addresses Debian Bug: #744953) | |
| Add sanity checks so that mke2fs will refuse insanely large flex_bg | |
| counts specified by the -G option. Insanely large flex_bg sizes can | |
| result in a file system which can't be unmounted, or with extremely | |
| pessimal metadata layouts. | |
| The mke2fs program will provide a better metadata layout for | |
| moderately large (but believable) flex_bg counts, such as 133,072. | |
| The mke2fs progam will also check the kernel version number to | |
| determine whether the lazy_itable_init option is supported, so that | |
| lazy inode table initialization can be used even if the ext4 is | |
| compiled as a module which isn't loaded at the time that mke2fs is | |
| run. | |
| Add description of ext4's mount options to the ext4 section 5 man | |
| page. | |
| Improve the chattr man page and clean up the chattr usage message. | |
| E2fsck will now automatically fix a last mount time or last write time | |
| which is in the future in preen mode, instead of aborting the fsck | |
| check. | |
| Mke2fs will now check the file system revision number requested by the | |
| command line, and reject it if it is too large. A file system with an | |
| unsupported revision number will not be accepted by any of the other | |
| file system tools, and this command line option is rarely used, so | |
| let's try to help the user not shoot their own foot off. | |
| The debugfs progam can now set the error count and associated | |
| first_error and last_error fields in the superblock using the | |
| set_super_value command. | |
| Resize2fs will not try to calculate the minimum size of a file system | |
| if it contains errors. Otherwise a very badly corrupted file system | |
| image can cause the minimum size calculation to loop forwever. Since | |
| resize2fs will not allow a file system marked as containing errors to | |
| be resized. It's pointless to calculate the minimum size, so just | |
| skip it. | |
| Fixed a typo in one of mke2fs's error message. | |
| If filefrag runs into an error, it will continue processing the rest | |
| of the files specified on thec ommand line, but then exit with an | |
| error code. | |
| Filefrag now prints some additional new flags (such as | |
| FIEMAP_EXTENT_ENCODED), and print unknown flags as hex values. | |
| Fixed support in filefrag for files with > 2**32 blocks on 32-bit | |
| platforms. | |
| Fixed a file descriptor leak in debugfs when copying files. | |
| Fixed a regression introduced in 1.42.10 which caused mke2fs to fail | |
| to create file systems larger than 2GB on 32-bit platforms. | |
| (Addresses Red Hat Bugzilla: #1099892, Debian Bug: #752107) | |
| Add Esparanto and Ukrainian translations, and update Czech, Dutch, | |
| French, German, Italian, Polish, Sweedish, and Vietnamese | |
| translations. | |
| Fixed various compiler warnings. | |
| Programmer's Notes | |
| ------------------ | |
| The gcc "-checker" option has been long deprecated, so remove support | |
| from e2fsprogs. It was causing a few people to be confused when they | |
| tried enabling the configure option. | |
| Update to the latest version of the config.status and config.rpath | |
| files, as well as newer versions of the autoconf files in aclocal.m4. | |
| Also, move the e2fsprogs-specific macros to acinclude.m4, which allows | |
| people who want to use autoreconf to do so. | |
| Make the use of strptime() function in debugfs to be more portable to | |
| fix regression test failures for FreeBSD and MacOS. | |
| A few miscellaneous changes designed to make life easier for | |
| translators. | |
| Fix the f_quota test and some Makefile dependencies if quota support | |
| is not enabled. | |
| Fix cross-compilation support, which got broken in 1.42.10. | |
| (Addresses Debian Bug: #753375) | |
| Delete lib/ext2_types.h on a make clean, and build it as necessary. | |
| Add a debug program used for libext2fs unit tests. | |
| Clean up the tests so that it avoids using GNU-specific behaviour in | |
| mktemp. Make sure the temporary files are cleaned up if the tests are | |
| interrupted. | |
| Add a new ext2fs_close_free() helper function which automatically | |
| takes care of freeing the ext2_filsys structure even if ext2fs_close() | |
| returns an error. | |
| E2fsprogs 1.42.10 (May 18, 2014) | |
| ================================ | |
| Mke2fs now creates file systems in regular files (which is very often | |
| used when maintaining virtual machine images) without requiring the | |
| user to use the force option. In addition, the mke2fs output has been | |
| made much less verbose and only displays information that users will | |
| be more likely to find useful by default. | |
| Mke2fs now will ask the user to confirm that they want to continue | |
| before wiping out a pre-existing file system, partition table, or LVM | |
| physical volume. | |
| Mke2fs now has the ability to create file systems where all the | |
| metadata is located at the very beginning of the device. This can be | |
| useful for flash devices which have SLC flash at the beginning of the | |
| disk, for FAT compatibility, for example. As part of this, mke2fs and | |
| tune2fs can control the location of the data blocks used by the | |
| journal inode. In addition, the new sparse_super2 feature allows for | |
| even fewer (anywhere from zero to two) backup superblocks. | |
| Mke2fs now uses much less CPU when allocating the blocks used for very | |
| large file systems. | |
| Mke2fs can now support creating a file system at an offset. This can | |
| be useful when creating a disk image for virtual machines (Addresses | |
| Debian Bug: #497984) | |
| Previously, e2fsck had a number of very serious bugs when checking a | |
| file system wich used the new the quota file system option (where the | |
| quota inodes were stored in hidden inodes) and the quota inode was | |
| inconsistent with the actual usage data. This problem was documented | |
| in https://ext4.wiki.kernel.org/index.php/Quota. These problems have | |
| been fixed in 1.42.10, so the quota should be safe to use with | |
| e2fsprogs 1.42.10. | |
| Fixed in a bug in resize2fs which could cause shrink operation fail in | |
| the unlikely situation when the inode table needs to be moved to a | |
| location before the current location. | |
| Resize2fs now has a much more accurate (and less conservative) | |
| estimation of how far the file system can be shrunk. This allows a | |
| mostly empty filesystem which is a few terabytes, to be shrunk to a | |
| few megabytes in a single resize2fs -M operation. | |
| E2fsck will now force a full file system check if there are any file | |
| system inconsistencies detected in the super block. | |
| The filefrag program will now display hte shared extent flag, which is | |
| used by file systems such as btrfs. | |
| If the number of inodes in the file systems is larger than the time | |
| that file sytem was created (as measured by the number of seconds | |
| since January 1, 1970) e2fsck would print a scary (but otherwise | |
| harmless) warning of file system corruption for each inode in the | |
| orphan list. This false positive has been fixed. | |
| The e4defrag program has been fixed so it will no longer refuse with | |
| filesystem with the 64-bit or the bigalloc feature enabled. | |
| The logsave progam will print a much less scary message which could | |
| lead users to believe something has gone very wrong with e2fsck exits | |
| with a non-zero exit status (since this is normal after e2fsck has | |
| automatically fixed a file system corruption during a preen | |
| operation). (Addresses Debian Bug: #468821) | |
| When creating a file system which is larger than 16TB, the | |
| resize_inode option must be disabled -- since the resize_inode simply | |
| doesn't support reserving metadata block numbers which is larger than | |
| 32 bits. The mke2fs program does this automatically if the file | |
| system size is determined automatically. It will now also do this if | |
| the file size is specified explicitly. | |
| Fixed bugs associated with resize2fs and shrinking bigalloc file | |
| systems. | |
| The e2fsck program will no longer try to add a UUID on a mounted file | |
| system with checksums enabled, since this could leave the file system | |
| checksums broken. | |
| Tune2fs will allow the removal of an external journal from file system | |
| which is marked as needing the journal replayed when the force ("-f") | |
| option is given twice. (Addresses Debian Bug: #559301) | |
| Tune2fs will no longer support enabling sparse_super if the meta_bg | |
| file system feature is enabled, since it could result in data loss. | |
| In practice, all modern file systems have sparse_super is enabled, so | |
| it's not worth trying to change how tune2fs handles enabling the | |
| sparse_super feature. | |
| Fixed support for 1k block file systems with the meta_bg feature. | |
| When the superblock is corrupt, e2fsck can't figure out the location | |
| of the alternate superblock. Unfortunately, the routine that | |
| calculates the location of the alternate superblock uses 8193 if it | |
| can't figure this out, so the message printed by e2fsck always | |
| suggests using "e2fsck -b 8193". This message has been fixed to | |
| suggest both the superblock location of 8193 and and 32768. | |
| (Addresses Debian Bug: #719185) | |
| The lookback mount detection code that was introduced in 1.42.9 wasn't | |
| actually compiled in due to an autoconf oops, so it's fixed now in | |
| 1.42.10. (Addresses Debian Bug: #497984) | |
| A bug introduced in 1.42.9 would cause debugfs to print two error | |
| messages if it found an error while parsing a user-supplied block | |
| number. This has been fixed in 1.42.10. | |
| Update Czech, Dutch, French, German, Polish, Spanish, Sweedish, and | |
| Vietnamese translations. (Addresses Debian Bug: #703048) | |
| Updated/fixed various man pages. (Addresses Debian Bugs: #719189, | |
| #719184) | |
| Fixed various Debian Packaging Issues. (Addresses Debian Bug: #718725) | |
| Programmer's Notes | |
| ------------------ | |
| Fixed a lot of coverity, sparce gcc -Wall, and clang warnings/nits. | |
| Allow the location of pkg-config files to be specified independent of | |
| the libdir location via a makefile variable. | |
| Fixed parse-types.sh not to complain when cross-compiling and the | |
| sizes of types are different between the target architecture and the | |
| architecture of the build system | |
| Allow the regression test suite to work correctly on systems which do | |
| not have the "truncate" or "mksawp" programs. | |
| Allow e2fsck to build correctly on systems (such as Android) that do | |
| not have the signal.h file. | |
| E2fsprogs now has code coverage testing which can be enbled using | |
| "configure --enable-gcov". | |
| The libe2p.h header file can now be used included by C++ programs. | |
| The profile/config file used by e2fsck and mke2fs will interpret | |
| numbers with a leading 0 character to mean that they should be | |
| interpreted as an octal integer. | |
| The extent handling functions in libext2fs have been improved so they | |
| have proper rollback when there is an error splitting an extent. Also | |
| fix a number of bugs when punching holes in files, and fix an | |
| off-by-one bug when inserting an extent into an empty inode. | |
| The libext2fs library now handles the support of BLOCK_UNINIT by | |
| clearing the portion of block bitmap when it is loaded, instead of | |
| when it is used. This reduces the chances of bugs, and and simplifies | |
| the code. It also means that debugfs will properly show that blocks | |
| in uninitialized block groups as being unused when using the testb | |
| command. | |
| The e4defrag program will try to use fadvise64 or posix_fadvise64() if | |
| it is present, which allows 64-bit offsets on 32-bit systems. | |
| E2fsprogs 1.42.9 (December 28, 2013) | |
| ==================================== | |
| Mke2fs will detect an attempt to create a file system on a loop | |
| mounted file and complain without the -FF option. Also fixed mke2fs | |
| so it allows the creation of a file system on a mounted device with | |
| two -F options, as documented in the man page, instead of three -F | |
| options. | |
| Fixed a large number of bugs in resize2fs, e2fsck, debugfs, and | |
| libext2fs to correctly handle bigalloc and 64-bit file systems. There | |
| were many corner cases that had not been noticed in previous uses of | |
| these file systems, since they are not as common. Some of the bugs | |
| could cause file system corruption or data loss, so users of 64-bit or | |
| bigalloc file systems are strongly urged to upgrade to e2fsprogs | |
| 1.42.9. | |
| The tune2fs program will now not allow changing the uuid on a mounted | |
| file system which has the uninit_bg feature enabled. This avoids a | |
| nasty race where the kernel and tune2fs are both retrying rewrite the | |
| group descriptors at the same time, with different ideas about what | |
| the UUID should be. | |
| When e2fsck is rehashing an extent-mapped directory, it's possible | |
| (although very rare) that an extent block will need to be allocated; | |
| fix e2fsck to make sure that the block gets marked as used. | |
| Mke2fs will now properly set the LARGE_FILE feature when creating a | |
| journal >= 2GB --- which can happen when using 64k block size. | |
| Fixed debugfs so that its freei command will correctly handle a request | |
| to free a range of consecutive inodes. | |
| Fixed 2fsck so it will not erroneously complain that an external journal | |
| is invalid if it is exactly 2**32 blocks. | |
| Fixed e2fsck so it won't try checking for, and adding, a missing | |
| lost+found directory when running in read-only mode. | |
| Fixed e2image to avoid some buffer overruns which would cause it to when | |
| creating a "standard (non-raw, non-qcow2) image file. Standard | |
| e2image files are actually very rarely used, so we didn't notice when | |
| the changes to enable the qcow2 format broke this e2image mode. | |
| Fixed mke2fs so that the extended option "-E resize=NNN" will not turn | |
| on the resize_inode feature when the meta_bg feature is set, since | |
| these two features can not be set at the same time. | |
| Fixed tune2fs so that when it disables the quota feature, it updates all | |
| of the backup superblocks. | |
| Fixed dumpe2fs that would cause it to abort when run using an image file | |
| when trying to print the journal information (which is not present in | |
| an e2image created image file). | |
| Fixed a potential integer overflow in e2reefrag. | |
| (Addresses-Debian-Bug: #718205) | |
| Enhance debugfs so that when copying a sparse file from a native file | |
| system into the file system image using the "write" command, it will | |
| create a sparse file into the destination file system. | |
| Enhanced debugfs so it can support a command line which is up to 8k | |
| long. | |
| E2image will refuse (unless the -f option is specified to force the | |
| issue) to create a raw or qcow image using a mounted file system, | |
| unless the -f option is specified to force the issue. | |
| E2image has been optimized for using it to efficiently copy a file | |
| system by only copying the allocated blocks, by using the options -ra. | |
| New options (-o and -O) have been added so that a source and | |
| destination offset can be given. The -p option will print progress | |
| information so the user will know how far along the copy is going. | |
| And finally, the new option -c is useful for updating a file system on | |
| an SSD, by avoiding unnecessary writes. E2image can also shift a file | |
| system image by doing an in place move. | |
| Fix a regression introduced in 1.42.8 which would cause e2fsck to | |
| erroneously report uninitialized extents past the EOF (as determined by | |
| i_size) to be invalid. | |
| Fixed resize2fs so under a corner case when an inode has a complex | |
| extent tree, it will not corrupt an interior node in the extent tree. | |
| Fixed resize2fs which would sometimes corrupt a file system when | |
| shrinking a file system to a minimum size using resize2fs -M. | |
| (Addresses Debian Bug: #660793) | |
| Fixed resize2fs so that it will relocate inode table blocks if this | |
| becomes necessary when shrinking the file system. | |
| Fixed resize2fs and e2fsck so they will not crash when hit a failure | |
| while operating on a file system with the MMP feature enabled. | |
| Fixed a bug in debugfs which caused it create an invalid inode when | |
| trying to write a zero-length file. | |
| E2fsck will no longer crash if it tries to delete an invalid | |
| extent-mapped symlink. | |
| E2fsck will no longer crash if it comes across an directory which is | |
| larger than 2GB (which is not allowed in valid file systems). | |
| Fixed debugfs's help texts to fully document all options and otherwise | |
| be more helpful. | |
| Updated/fixed various man pages. (Addresses Debian Bugs: #586218, | |
| #669730, #698076) | |
| Fixed various Debian Packaging Issues (#698879, #721365) | |
| Programmer's Notes | |
| ------------------ | |
| Fix sparse, gcc -Wall and clang nits. | |
| Update config.{guess,sub} to the latest version | |
| Fixed various memory and file descriptor leaks on various error paths, | |
| as well as some missing error return checks, which were found using | |
| Coverity. | |
| Run sparse against source files when building e2fsprogs with 'make | |
| C=1'. If instead C=2, it configures basic ext2 types for bitwise | |
| checking with sparse, which can help find the (many many) spots where | |
| conversion errors are (possibly) happening. | |
| Allow the regression test to be run in chrooted environments where | |
| /etc/mtab might be missing. | |
| The ext2fs_punch() function, which was introduced in 1.42, was broken | |
| in many ways, but this was never noticed since it wasn't used for | |
| anything significant. Some of the bugs include failing when trying to | |
| punch a completely sparse file, failing when punching an extent-mapped | |
| inode when the starting block was at the beginning of the inode, and | |
| not being able to punch a single block (where start_blk == end_block). | |
| It also didn't handle being passed an invalid, too-large ending block | |
| number, and didn't handle properly terminate at the right place when | |
| operating on an indirect-mapped inode. | |
| Fixed some minor typo's in the error catalog for libext2fs. | |
| Fixed ext2fs_file_set_size2() so that if it truncates an inode by | |
| setting the file size, to zero the rest of the block to the end of the | |
| file, so that if an ext4 FUSE driver tries to extended the file, that | |
| we don't avoid stale data from being returned. | |
| Fixed ext2fs_bmap() to disallow clients from trying to map or set | |
| logical blocks which are larger than what an extent-mapped or indirect | |
| block-mapped inode can allow. | |
| If debugfs (or some userspace program using libext2fs) creates a file | |
| which is larger than 2GB, make sure the large_file feature flag gets | |
| set. | |
| Fix a bug in ext2fs_link() where if there is multiple empty slots in the | |
| directory which are large enough, the directory entry could get | |
| inserted more than once in the directory. | |
| If quota support is disabled (which is the default), make sure that | |
| all traces of the quota support is removed from usage messages, man | |
| pages, and tune2fs must not be able to enable the quota file system | |
| feature. (Addresses Red Hat Bugzilla: #1010709) | |
| The ext2fs_file_write() now updates i_size on a successful write, | |
| instead of only updating i_size wen the file is closed via | |
| ext2fs_file_close(). | |
| Added a shell script, populate-extfs.sh which uses debugfs to populate | |
| an ext2/3/4 file system image from a given directory. It is similar | |
| to the genext2fs program, but it supports ext3 and ext4 file system. | |
| Add changes to the libext2fs library to support block group | |
| descriptors larger than 64 bytes (for future compatibility). | |
| Fixed an off-by-one bug in ext2fs_file_set_size2() so that it will not | |
| leave an extra block in the file when truncating the file down to | |
| size. | |
| The html version info pages are now built using makeinfo --html | |
| instead of the unmaintained and now-obsolete texi2html program. | |
| E2fsprogs 1.42.8 (June 20, 2013) | |
| ================================ | |
| As a part of mke2fs's option parsing cleanup, the use of the -R option | |
| will give a warning that it is depreated (it has been so documented | |
| since 2005) and -E should be used instead. | |
| Mke2fs will not give warnings about the bigalloc and quota options in | |
| quiet mode. | |
| If an invalid journal size is given to mke2fs, it will now complain | |
| and exit sooner. | |
| Debugfs was erroneously giving spurious error messages for certain | |
| extent_inode subcommands which take arguments (split_node, | |
| replace_node, and insert_node). This has been fixed. | |
| Fix the parsing of the 's' (sectors) in parse_num_blocks2, which among | |
| other programs is used by mke2fs. | |
| Change mke2fs so that it does not set the root directory to the real | |
| uid/gid of the mke2fs process. Add the extended option root_owner to | |
| override this behavior. | |
| Fix resize2fs when shrinking file systems to make sure that bitmap | |
| blocks aren't left outside the bounds of the shrunken file system. | |
| This could happen with flex_bg file systems that were grown using | |
| the old online resizing algorithm. | |
| E2fsck will now detect and repair corrupted extent trees which contain | |
| invalid extents at the end of the extent tree leaf block. | |
| E2fsck will now longer complain about zero length extended attribute | |
| values. | |
| Fix a regression introduced in e2fsprogs v1.42 which caused e2image -s | |
| to crash. | |
| Add safety check so tune2fs will not attempt to set the inode size to | |
| be larger than the block size. | |
| Fix e2fsck so it can check a read-only root file system with an | |
| external journal. (Addresses Debian Bug: #707030 | |
| Fix off-line resizing of file systems with flex_bg && !resize_inode | |
| (Addresses Debian Bug: #696746) | |
| Fix e2image with large (> 32-bit) file systems (Addresses Debian Bug: | |
| #703067) | |
| Enhance chattr to allow clearing the extent flag if the kernel allows | |
| migrating extent based files to use indirect blocks. | |
| Update German translation. | |
| Updated/fixed various man pages. (Addresses Debian Bugs: #712429, | |
| #712430, #707609) | |
| Fixed various Debian Packaging Issues (Addresses Debian Bug #708307) | |
| Programmer's Notes | |
| ------------------ | |
| Use secure_getenv() in preference to __secure_getenv(). | |
| Optimize CPU utilization of ext2fs_bg_has_super(). | |
| Fix ext2fs_llseek() on 32-bit i386 systems to work correctly when | |
| SEEK_CUR is used with large files. | |
| The ext2fs_read_inode_full() function will no longer use | |
| fs->read_inode() if the caller has requested more than the base 128 | |
| byte inode structure and the inode size is greater than 128 bytes. | |
| Fix build failure with --enable-jbd-debug. | |
| Clean up filtering of outputs for the regression tests by using a | |
| common sed script. | |
| Fix gcc -Wall and clang nits. | |
| E2fsprogs 1.42.7 (January 21, 2013) | |
| =================================== | |
| Add warnings to mke2fs, resize2fs, and tune2fs that the bigalloc and | |
| quota features are still under development. For more information | |
| please see: | |
| * https://ext4.wiki.kernel.org/index.php/Bigalloc | |
| * https://ext4.wiki.kernel.org/index.php/Quota | |
| Add some new options to filefrag from Lustre's patches to e2fsprogs: | |
| * add -k option to print extents in kB-sized units (like df -k) | |
| * add -b {blocksize} to print extents in blocksize units | |
| * add -e option to print extent format, even when FIBMAP is used | |
| * add -X option to print extents in hexadecimal format | |
| Fix resize2fs so that it can handle off-line resizes of file systems | |
| with the flex_bg feature but without a resize_inode (or if we run out | |
| of reserved gdt blocks). This also fixes a problem where if the user | |
| creates a filesystem with a restricted number of reserved gdt blocks, | |
| an off-line resize which grows the file system could potentially | |
| result in file system corruption. | |
| Fix a resize2fs bug which could cause it to corrupt bigalloc file | |
| systems when doing an off-line resize. | |
| Further optimize resize2fs so it doesn't use quite as much CPU when | |
| resizing very large file systems. | |
| Fixed 32-bit overflow bugs which could cause resize2fs to fail and | |
| possibly corrupt the file system while resizing 64-bit file systems. | |
| Fix a bug in mke2fs where parsing "-E resize=NNN" will result in a | |
| mke2fs crash due to a divide-by-zero if the 64bit file system feature | |
| is enabled. | |
| Add better error checking to mke2fs to check for invalid parameters | |
| when creating bigalloc file system. | |
| When creating bigalloc filesystems, the -g option to mke2fs will now | |
| specify the number of clusters per block group. | |
| Add to debugfs the functionality to corrupt a specific file system | |
| block via the "zap_block" command. | |
| Add to debugfs the functionality to print out a hex dump of a block in | |
| the file system via the "block_dump" command. | |
| Add to debugfs the functionality to manipulate the extent tree | |
| directly via the "extent_open" command. | |
| Fixed debugfs's mknod command so that it updates the block group | |
| statistics. | |
| Fix e2fsck so it can detect and fix inconsistencies in the interior | |
| nodes of an inode's extent tree. | |
| Fix a potential memory corruption failure in e2fsck's error path if | |
| the call to ext2fs_open2() fails. | |
| Fix e2fsck if its logging function is enabled in e2fsck.conf, and the | |
| resulting file name for the log file is longer than 100 bytes, that it | |
| properly handles this situation instead of crashing. | |
| E2fsck will now report the amount of memory that it attempted to | |
| allocate when a memory allocation request fails, to make it easier to | |
| track down the problem. | |
| Fix mke2fs's handling of the mmp_update_interval option. (Addresses | |
| Lustre Bug: LU-1888) | |
| E2image can now include all data blocks in the e2image output file | |
| when the user specifies the -a option. | |
| If e2fsprogs is compiled without --enable-quota, make sure that | |
| tune2fs can not turn on the feature for new-style quota support, since | |
| afterwards, none of the e2fsprogs tools will be willing to touch that | |
| file system. | |
| Optimize e2fsck's so that it uses much less CPU for large file | |
| systems. This can result in significant speedups, especially on | |
| CPU-constrained systems. This was primarily done by optimizing | |
| libext2fs's bitmap functions. (Addresses Google Bug: #7534813) | |
| Fix debugfs's htree command so that all its messages are sent through | |
| the pager. | |
| Fixed debugfs's "dump_file" and "cat" functions work correctly | |
| on file systems whose block size is greater than 8k. | |
| Fix e2freefrag so it works on 64-bit file systems, and so it uses much | |
| less memory. (Addresses Google Bug: 7269948) | |
| Update the spd_readdir.c file in the contrib directory to include some | |
| additions which were made in 2008 that didn't get folded into the | |
| version which we checked into the e2fsprogs source tree. These | |
| enhancements include thread safety, support for readdir64_r(), and | |
| safe_getenv() support in case spd_readdir.so is used for setuid binaries. | |
| Update Czech, Dutch, French, German, Polish, Sweedish, and Vietnamese | |
| translations | |
| Add a command to debugfs to create symlinks. | |
| Document the bigalloc feature in the mke2fs man page. (Addresses | |
| Debian Bug: #669730) | |
| Programmer's Notes | |
| ------------------ | |
| Fix gcc -Wall nits. | |
| Fix a spelling typo in the libext2fs texinfo documentation. | |
| Change the output from "make check" so that tools such as emacs's "M-x | |
| compile" does not mistake the output as containing a compiler error. | |
| Export two new functions from libext2fs: ext2fs_extent_node_split() | |
| and ext2fs_extent_goto2(). | |
| The ext2fs_extents_fix_parents() was fixed so it does not modify the | |
| location of the extent handle if its current location is at an | |
| interior node, rather than a leaf node of an inode's extent tree. | |
| Add a regression test to assure that e2fsck can correctly fix an | |
| inconsistent interior node in an inode's extent tree. | |
| The ext2fs_{mark,unmark,test}_block_bitmap_range2() functions now | |
| correctly support bigalloc file systems which use store block usage | |
| information in units of clusters. | |
| Fixed the help text in the configure script for --enable-quota. | |
| The m68k-specific bitops code has been removed since they were | |
| incorrectly treating bit numbers with the high bit set as signed | |
| integers. Furthermore, modern compilers do a good enough job | |
| optimizing the generic code there is no point in having the m68k | |
| specific asm statements. | |
| Fixed how we link the test programs so they always use the static | |
| libraries, so that we test using the libraries which we have just | |
| built. | |
| Update config.guess and config.sub to the latest versions from the GNU | |
| project. | |
| Fixed the com_err.texinfo file so that it can produce a valid | |
| postscript/pdf printed output. | |
| Add a regression test which checks debugfs's ability to create | |
| symlinks, named FIFO's, and device nodes. | |
| Add a function ext2fs_symlink(), which creates symlinks to the | |
| libext2fs library. | |
| Add debugging code so we can test old kernel interfaces for online | |
| resize to resize2fs. This backwards compatibility checking is keyed | |
| off of the RESIZE2FS_KERNEL_VERSION, which is designed to allow us to | |
| test the functionality of the kernel's older resize ioctls without | |
| needing to install an old version of resize2fs, and to also test a | |
| modern resize2fs's ability to work with older kernels without having | |
| to install an older version of the kernel. | |
| E2fsprogs 1.42.6 (September 21, 2012) | |
| ===================================== | |
| When mke2fs creates file systems with lazy itable initialization, the | |
| progress updates for writing the inode table happens so quickly that | |
| on a serial console, the time to write the progress updates can be the | |
| bottleneck. So mke2fs will now only update its progress indicators | |
| once a second. | |
| Resize2fs will skip initializing the inode tables if the kernel | |
| supports lazy_itable_init, which speeds up growing off-line growth of | |
| uninit_bg file systems significantly. Resize2fs will now also | |
| correctly set the itable_unused field in the block group descriptor to | |
| speed up the first e2fsck after the file system is grown. | |
| Resize2fs has been fixed so that on-line resizing of meta_bg file | |
| systems work correctly. This is needed to grow file system which are | |
| larger than 16T. | |
| Resize2fs will now correctly handle resizing file systems to 16TB on | |
| 32-bit file systems when "16TB" is specified on the command line. | |
| Fix mke2fs so that it will be careful to set the reserved blocks ratio | |
| larger than 50%; this can happen when creating small file systems and | |
| when the last block group is dropped because there are not enough | |
| blocks to support the metadata blocks in the last block group. | |
| Fixed spelling mistake in debugfs's help message. | |
| Fixed a potential seg fault in e2fsck when there is an I/O error while | |
| reading the superblock. | |
| Fixed various Debian Packaging Issues (Addresses Debian Bug #677497) | |
| Updated/fixed various man pages. (Addresses Sourceforge Bug: | |
| #3559210) | |
| Programmer's Notes | |
| ------------------ | |
| The configure option --enable-relative-symlink was broken so that it | |
| needed to be --enable-symlink-relative-symlinks. We will support both | |
| for at least two years, but then the worng configure option will be | |
| removed. | |
| Fixed a regression introduced in 1.42.5 so the link order for | |
| e2fsprogs' libraries will be correct for both static and shared | |
| linking. (Addresses Sourceforge Bug: #3554345) | |
| Add support for e2fsprogs to be compiled using clang/LLVM. | |
| Fix portability problems on non-Linux systems: avoid compile failures | |
| on systems that don't have malloc.h | |
| Fix f_mmp regression test suite so that debugfs gets killed if the | |
| test is interrupted. | |
| E2fsprogs 1.42.5 (July 29, 2012) | |
| ================================ | |
| Fixed a bug with mke2fs where if there is only 8 inodes per block | |
| group, the calculation of the number of uninitialized inodes in the | |
| first block group would go negative. This resulted in "mke2fs -N 256 | |
| -t ext4 /tmp/foo.img 256m" trying to write so many blocks that /tmp | |
| would run out of space. (Addresses Sourceforge Bug: #3528892) | |
| Fixed a bug in how e2fsck would uniquify directory entry names. | |
| (AddressesSourceforge Bug: #3540545) | |
| Previously, e2fsck would only allow a mounted file system to be | |
| checked if it was the root file system and it was mounted read-only. | |
| Now it will allow any file system mounted read-only to be checked if | |
| the -f option is specified. This makes it easier to test how e2fsck | |
| handles checking file systems which are mounted without having to test | |
| on the root file system. | |
| Fixed a problem if e2fsck where if the root file system is mounted | |
| read-only, e2fsck would not clear an error indication in the journal | |
| superblock. Combined with a kernel bug, this would cause the e2fsck | |
| to check the file system after every single boot. | |
| The e4defrag program can now handle device symlinks, such as | |
| /dev/mapper/testvg-testlv, instead of insisting on a less | |
| human-friendly name such as /dev/dm-2. (Addresses Red Hat Bugzilla: | |
| #707209) | |
| Fixed filefrag so it will not crash with a segfault on files from a | |
| virtual file system such as /proc. (e.g., "filefrag | |
| /proc/partitions") | |
| Fixed filefrag so that it correctly reports the number of extents. | |
| (Addresses Red Hat Bugzilla: #840848) | |
| Fixed a file descriptor leak in logsave which could cause it to hang. | |
| (Addresses Debian Bug: #682592) | |
| Fixed e2fsck so that the file system is marked as containing an error | |
| if the user chooses not to fix the quota usage information. | |
| Fixed tune2fs so that it correctly removes the quota feature when the | |
| last quota inode is removed. | |
| Fix tune2fs so that after removing a quota inode, the block bitmap is | |
| updated; otherwise, e2fsck would complain after running 'tune2fs -O | |
| ^quota <dev>'. | |
| Fix tune2fs so that when converting a file system from using legacy | |
| quota files to the new quota file system feature with hidden quota | |
| files, the accounting for these files is handled correctly so that | |
| e2fsck doesn't complain. | |
| Improved e2fsck's verbose reporting statistics, and allow the more | |
| verbose reporting to be enabled via /etc/e2fsck.conf. | |
| Fixed various Debian Packaging Issues (Addresses Debian Bug #678395) | |
| Updated/fixed various man pages. (Addresses Debian Bugs: #680114) | |
| Programmer's Notes | |
| ------------------ | |
| Fixed portability problems on other operating systems (e.g., Hurd and | |
| FreeBsd) caused by the attempted inclusion of <sys/quota.h>. | |
| Make sure that shared libraries link with the shared libraries built | |
| in the build tree, instead of the system provided libraries. | |
| Previously, libraries and executables were linked with the system | |
| libraries if present, and possibly using static archives instead of | |
| shared libraries. This was also problematic since if libext2fs.so is | |
| linked with a static libcom_err.a from system, the build system would | |
| attempt to link without -lpthread. (Addresses Sourceforge Bug: | |
| #3542572) | |
| E2fsprogs 1.42.4 (June 12, 2012) | |
| ================================ | |
| Fixed more 64-bit block number bugs (which could end up corrupting | |
| file systems!) in e2fsck, debugfs, and libext2fs. | |
| Fixed e2fsck's handling of the journal's s_errno field. E2fsck was | |
| not properly propagating the journal's s_errno field to the superblock | |
| field; it was not checking this field if the journal had already been | |
| replayed, and if the journal *was* being replayed, the "error bit" | |
| wasn't getting flushed out to disk. | |
| Fixed a false positive complaint by e2fsck if all of the extents in | |
| the last extent tree block are uninitalized and located after the end | |
| of the file as defined by i_size. | |
| The dumpe2fs will now display the journal's s_errno field if it is | |
| non-zero, and it will also display the journal's 64-bit feature flag | |
| if present. | |
| Fix e2fsck so that it always opens the device file in exclusive mode | |
| when it might need to modify the file system, and never if the -n | |
| option is specified. (Previously, there were a few corner cases where | |
| it might get things wrong in either direction.) | |
| E2fsck now correctly truncates or deallocates extent-mapped inodes on | |
| the orphan list. The root cause was a bug in libext2fs's block | |
| iterator which could end up skipping an extent when the last block in | |
| an extent is removed, causing the current extent to be removed from | |
| the extent tree. | |
| E2fsck now correctly sets the global free block and inode counts when | |
| truncating or removing inodes on the orphan list in preen mode. | |
| Previously, it would leave these values would be set incorrectly, | |
| which is largely a cosmetic issue since the kernel no longer pays | |
| attention to those fields, but it can cause spurious complaints in | |
| subsequent e2fsck runs. | |
| Fix i_blocks accounting when the libext2fs library needs to add or | |
| remove an extent tree block on bigalloc file systems. | |
| The lsattr and chattr programs now support the No_COW flag for the | |
| benefit of btrfs. | |
| Debugfs now interprets date strings of the form @ddd as ddd seconds | |
| after the beginning of the epoch. This is handy when setting an inode | |
| number into the d_time field when debugging orphan list handling. | |
| Fix a precedence bug with built-in quota support which might result in | |
| e2fsck paying attention to the quota inode field even if the built-in | |
| quota feature flag is not set. Fortunately, in practice that | |
| superblock field should be zero for non-built-in quota file systems, | |
| so it's unlikely this bug would have caused problems. | |
| Updated/fixed various man pages. (Addresses Debian Bugs: #674453, | |
| #674694) | |
| Programmer's Notes | |
| ------------------ | |
| The regression test suite can now run the integration tests in the | |
| tests directory in parallel, via "make -jN check". | |
| Add new test, f_zero_extent_length which tests e2fsck's handling of | |
| the case where all of the extents in the last extent tree block are | |
| uninitialized extents after i_size. | |
| Add a new test, f_jnl_errno, which checks handling of an error | |
| indication set in the journal superblock. | |
| Fix the test f_jnl_64bit so that it properly checks e2fsck's handling | |
| of a 64-bit journal. | |
| Add two tests, f_orphan_indirect_inode and f_orphan_extent_inode which | |
| tests e2fsck's handling of orphan inodes in preen mode, and truncation | |
| of extent inodes on the orphan list. | |
| Fixed more OS X portability issues. | |
| E2fsprogs 1.42.3 (May 14, 2012) | |
| =============================== | |
| Fix a bug in the Unix I/O manager which could cause corruption of file | |
| systems with more than 16TB when e2fsprogs is compiled in 32-bit mode | |
| (i.e., when unsigned long is 32-bits). Also fix a bug which caused | |
| dumpe2fs to incorrectly display block numbers > 32-bits. | |
| Improve the support for integrated quota files (where quota is a first | |
| class supported feature using hidden files in the ext4 file system). | |
| Previously the quota file was getting rewritten even when it was not | |
| necessary, and e2fsck would erroneously try to hide quota files which | |
| were already hidden. | |
| Quiet complaints in e2fsck when the total free blocks or inodes are | |
| incorrect in the superblock after an system crash, since we don't | |
| update nor depend on the superblock summaries at each commit boundary. | |
| Fixed a regression introduced in 1.42.2 which would cause applications | |
| outside of e2fsprogs which did not pass the EXT2_FLAG_64BIT (and so | |
| would were still using the legacy 32-bit bitmaps) to crash. This was | |
| due to missing 32-bit compat code in side the function | |
| ext2fs_find_first_zero_generic_bmap(). (Addresses Red Hat Bugzilla: | |
| #808421) | |
| Fix a bug which would cause mke2fs to fail creating the journal if | |
| /etc/mtab and /proc/mounts are missing. (Addresses Sourceforge Bug: | |
| #3509398) | |
| Updated/fixed various man pages. | |
| Update Czech, Dutch, French, German, Polish, Sweedish, and Vietnamese | |
| translations | |
| Fixed various Debian Packaging issues. | |
| Programmer's Notes | |
| ------------------ | |
| Change the nonsensically wrong types in the function signature of the | |
| inline function ext2fs_find_first_zero_block_bitmap2(). This was | |
| caused by a cut and paste error; fortunately no code in e2fsprogs used | |
| this inline function, and there are any users of this functions | |
| outside of e2fsprogs. | |
| Add support for systems which have valloc(), but which do have | |
| posix_memalign() nor memalign() (such as MacOS 10.5). | |
| Refactor and clean up the allocation of aligned buffers for Direct I/O | |
| support. Previously some allocations were requesting a greater | |
| alignment factor that what was strictly necessary. Also optimize | |
| reading and writing bitmaps using Direct I/O when the size of the | |
| bitmap did not fully cover the file system blocksize. | |
| Reserve the codepoints for the INCOMPAT features LARGEDATA and | |
| INLINEDATA. | |
| Improved the regression test suite by adding some new integration | |
| tests (f_jnl_32bit, f_jnl_64bit) which detect breakage of the on-disk | |
| jbd2 format, as well as f_eofblocks which tests the new handling of | |
| uninitialized and initialized blocks beyond i_size. Also add a new | |
| unit test which verifies 32-bit bitmaps support and the new | |
| find_first_zero primitives. | |
| Add a few dependencies to fix parallel (make -j) builds. | |
| Removed bash'isms which were breaking the regression test suite on | |
| systems where /bin/sh is not bash. | |
| The config.guess and config.sub have been updated to the 2012-02-10 | |
| version. | |
| Fix a portability problem caused by assuming the present of mntent.h | |
| means that setmntent() exists. Instead, explicitly test for this in | |
| the configure script. | |
| If the sys/signal.h header file does not exist, don't try to include | |
| it, since it's not available on all systems. | |
| Add support for systems that do not support getpwuid_r() | |
| The configure script now supports a new option, | |
| --enable-relative-symlinks, which will install relative symlinks for | |
| the ELF shared library files. (Addresses Sourceforge Bug: #3520767). | |
| When building BSD shared libraries make sure the LDFLAGS variable is | |
| passed to the linker. Fixing this allows, for example, e2fsprogs to | |
| be built in 32-bit mode on Mac OS X Lion (Addresses Sourceforge Bug: | |
| #3517272) | |
| Fix gcc -Wall nitpicks | |
| E2fsprogs 1.42.2 (March 27, 2012) | |
| ================================= | |
| The resize2fs program uses much less CPU and is much faster for very | |
| large file systems. (Addresses Debian Bug: #663237) | |
| The seti and freei commands in debugfs can now take an optional length | |
| argument to set and clear a contiguous range of inodes. | |
| E2fsck will now make explicit checks for the EOFBLOCKS_FL, since we | |
| plan to remove support for it from the kernel file system driver. It | |
| really wasn't very useful and was causing more problems than it | |
| solves. Since e2fsck will complain if inodes that should have | |
| EOFBLOCKS_FL do not have the flag set, we are going to remove this | |
| check from e2fsprogs first, and then only remove the flag from the | |
| kernel much later. | |
| The mke2fs program can now use direct I/O via "mke2fs -D". This will | |
| slow down the mke2fs, but it makes it more polite on a loaded server | |
| by limiting the amount of memory that gets dirtied by mke2fs when it | |
| is using buffered I/O. | |
| E2fsck was needlessly closing and re-opening the file system as a side | |
| effect of adding Multiple Mount Protection (MMP). This isn't | |
| necessary for non-MMP file systems, so drop it. | |
| Print errors returned by ext2fs_open2() and ext2fs_check_desc() so we | |
| can more easily diagnose memory allocation failures caused by | |
| insufficient memory. E2fsck will now abort if there are memory | |
| allocation failures when the file system is initially opened and | |
| during the block group descriptor checks. (Addresses Google Bug: | |
| #6208183) | |
| If there are incorrect block group checks, e2fsck will now report the | |
| incorrect and corrected checksum values. | |
| The e2fsck progam can now write log files containing the details of | |
| the problems that were found and fixed directly, via configuration | |
| parameters in /etc/e2fsck.conf. | |
| Added the ability to limit the number of messages reported by e2fsck | |
| for a given problem type. This avoids a potential bottleneck if there | |
| is a serial console which can cause a boot sequence to take a long | |
| time if e2fsck needs to report many, many file system errors. | |
| The dumpe2fs, debugfs, and tune2fs now use rbtree bitmaps, which cause | |
| them to use much less memory for large file systems. | |
| The dumpe2fs program will now print the expected block group checksum | |
| if it is incorrect. This helps to diagnose problems caused by | |
| incorrect block group checksums. | |
| E2fsck now checks for extents with a zero length, since the kernel | |
| will oops if it comes accross such a corrupted data structure. (See | |
| https://bugzilla.kernel.org/show_bug.cgi?id=42859) | |
| E2fsck has a number of bugs relating to discard that have been fixed. | |
| (1) Fixed a bug which could cause e2fsck to discard portions of the | |
| inode table which were actually in use. (2) E2fsck will now avoid | |
| using discard if the block device doesn't zero data on discard, since | |
| otherwise this could cause problems if the file system gets corrupted | |
| in the future. (3) E2fsck will now avoid using discard when it is run | |
| in read-only mode. (4) Fixed a bug which caused e2fsck to not issue | |
| discards in the last block group. | |
| E2fsck's CPU utilization in pass 5 has been optimized, which will | |
| speed up e2fsck slightly. | |
| E2image will now skip copying uninitialized bitmap and inode table | |
| blocks. | |
| Fixed mke2fs -S so it does not corrupt the first block group's | |
| information. | |
| E2fsck will now check the new sysfs interface to determine if we are | |
| using the battery or AC mains. (Addresses SourceForge Bug: #3439277) | |
| Updated/fixed various man pages. (Addresses Debian Bug: #665427) | |
| Fixed various Debian Packaging issues. (Addresses Debian Bug: #665885) | |
| Programmer's Notes | |
| ------------------ | |
| Fixed various portability issues for non-Linux systems, particularly | |
| MacOS X, as well as Linux systems running with the just-released glibc | |
| 2.15. | |
| Fix file descriptor leak in ext2fs_close() if the file system with | |
| uninit_bg is opened read/only with a backup superblock. (Addresses | |
| SourceForge Bug: #3444351) | |
| Fixed an invalid return in a non-void function in the quota code. | |
| (Addresses SourceForge Bug: #3468423) | |
| Fixed the debian rules file so that the calls to dpkg-buildflags works | |
| when the shell is dash. | |
| The debian package build now uses V=1 so that there is more | |
| information about potential build failures in debian buildd logs. | |
| If the uninit flags get cleared by functions such as | |
| ext2fs_new_inode() or ext2fs_new_block2(), we now make sure the | |
| superblock is marked dirty and the block group descriptor checksum is | |
| updated if necessary. | |
| The debian rules file will now try to load debian/rules.custom of it | |
| exists. This flie can skip various builds for speed reasons if there | |
| is no need for the e2fsck-static or udeb packages. Available | |
| customizations in the rules file includes SKIP_STATIC=yes, | |
| SKIP_BF=yes, and SKIP_DIETLIBC=yes. | |
| In addition, if the file misc/mke2fs.conf.custom.in exists in the | |
| source tree, it will be used instead of the standard misc.conf file in | |
| the upstream sources. This makes it easier for Debian-derived systems | |
| to distribute a custom mke2fs.conf file without having to worry about | |
| merge issues if future versions of e2fsprogs makes changes in the | |
| upstream default version of mke2fs.conf. | |
| E2fsprogs 1.42.1 (February 17, 2012) | |
| =================================== | |
| The mke2fs and e2fsck now use significantly less memory when creating | |
| or checking very large file systems. This was enabled by adding | |
| extent-based bitmaps which are stored using a red-block tree, since | |
| block and inode allocations tend to be contiguous. | |
| The command mke2fs -S is used as a last ditch recovery command to | |
| write new superblock and block group descriptors, but _not_ to destroy | |
| the inode table in hopes of recovering from a badly corrupted file | |
| system. So if the uninit_bg feature is enabled, mke2fs -S will now | |
| set the unused inodes count field to zero. Otherwise, e2fsck -fy | |
| after using mke2fs -S would leave the file system completely empty. | |
| Since mke2fs recognizes mke3fs in argv[0] to mean "mkfs.ext3", also | |
| honor "mke4fs" to work the same as "mke2fs.ext4", since RHEL5 has | |
| installed an mke2fs binary using that name. | |
| The usage and help messages for the -G, -t and -T options in mke2fs | |
| have been fixed. | |
| If e2fsck needs to use the backup group descriptors, the | |
| ext2fs_open2() function clears the UNINIT bits to ensure all of the | |
| inodes in the file systems get scanned. However, the code which reset | |
| the UNINIT flags did not also recalculate the checksum, which produced | |
| many spurious (and scary) e2fsck messages. This has been fixed by | |
| resetting cheksums when the UNINIT bits are cleared. | |
| Relax a check in e2fsck which required that the block bitmap to be | |
| initialized when the inode bitmap is in use. This will allow us to | |
| eventually eliminate code from the kernel which forcibly initialized | |
| the block bitmap when the inode bitmap is first used, requiring an | |
| extra journal credit and disk write. (Addresses Google Bug: #5944440) | |
| Make sure rdebugfs (which may be installed setuid or setgid disk) does | |
| not honor environment variables if euid != uid or egid != gid. | |
| Debugfs's ncheck command has been optimized and now is much more | |
| robust with faced with corrupted file systems. The ncheck command | |
| also now has a -c option which will verify the file type information | |
| in the directory entry to see if matches the inode's mode bits. This | |
| is extremely useful when trying to use debugsfs to determine which | |
| parts of the file system metadata can be trusted. | |
| E2image will try to use ftruncate64() to set the i_size for raw | |
| images, instead of writing a single null byte. This avoid allocating | |
| an extra block to the raw image, for those file systems and/or | |
| operating systems that support this. (Linux does.) In addition, fix | |
| a logic bug that caused the file to not be properly extended if the | |
| size of the last hole was exactly an multiple of a megabyte. | |
| Fixed a bug in resize2fs where for 1k and 2k file systems, where | |
| s_first_data_block is non-zero, this wasn't taken into account when | |
| calculate the minimum file system size for use with the -M option. | |
| Fixed the badblocks program to honor the -s flag when in read-only -t | |
| mode. (Addresses Debian Bug #646629) | |
| Update Czech, Dutch, French, Polish, and Sweedish translation from the | |
| Translation Project. | |
| Fixed various Debian Packaging issues so that dpkg-buildflags is used | |
| if present, which allows e2fsprogs to be built with security hardening | |
| flags. (Addresses Debian Bugs: #654457) | |
| Programmer's Notes | |
| ------------------ | |
| Fix a bug in ext2fs_clear_generic_bmap() when used for 32-bit bitmaps. | |
| This was only an issue for programs compiled against e2fsprogs 1.41 | |
| that manipulate bitmaps directly. (Addresses Sourceforge Bugs: | |
| #3451486) | |
| The libext2fs library now uses sysconf() to fetch the page size, instead | |
| of the deprecated getpagesize(). | |
| The ext2fs_get_pathname() function will return a partial path if an a | |
| directory in the path is not a directory, displaying it as an inode | |
| number in angle brackets instead of giving up and displaying an error. | |
| This is much more helpful when a user is trying to debug a corrupted | |
| file system. | |
| Codepoints for the RO_COMPAT_REPLICA feature has been reserved. | |
| Added a new library function, ext2fs_file_get_inode_num(), for use by | |
| fuse2fs. | |
| Fixed a bug in ext2fs_file_set_size2() so that when it is truncating a | |
| file, it actually works. | |
| The block iterator now properly honors the BLOCK_ABORT flag for | |
| extent-based flags. Previously, it didn't, which generally made code | |
| be less efficient, but it could cause bugs in ext2fs_link(), for | |
| example, by causing it to insert multiple directory entries. | |
| Fixed an (harmless other than causing a compiler warning) use of an | |
| uninitialized variable in e2fsck's MMP code. | |
| E2fsprogs 1.42 (November 29, 2011) | |
| ================================== | |
| This release of e2fsprogs has support for file systems > 16TB. Online | |
| resize requires kernel support which will hopefully be in Linux | |
| version 3.2. Offline support is not yet available for > 16TB file | |
| systems, but will be coming. | |
| This release of e2fsprogs has support for clustered allocation. This | |
| reduces the number of block (now cluster) bitmaps by allocating and | |
| deallocating space in contiguous power-of-2 collections of blocks, | |
| which are called clustered. This is a file system level feature, | |
| called 'bigalloc', which must be enabled when the file system is | |
| initially formatted. It is not backwards compatible with older | |
| kernels. | |
| Added support for the Multi-Mount Protection (MMP) feature. | |
| E2fsck more efficiently uses scratch files for really big file | |
| systems. (This is a feature that has to be turned on explicitly; see | |
| [scratch_files] in the e2fsck.conf man page.) | |
| Fix a bug in e2fsck where if the free blocks and inodes counts are | |
| incorrect, e2fsck would fix them without printing an error message. | |
| This would cause a "*** FILE SYSTEM WAS MODIFIED ***" message without | |
| any explanation of what was fixed. | |
| E2fsck will no longer attempt to clone an extended attribute block in | |
| pass1b handling if the file system does not support extended | |
| attributes. | |
| E2fsck will be more careful accidentally asking the user to continue | |
| if the file system is mounted, so that an escape sequence won't cause | |
| a false positive. (Addresses Debian Bug: #619859) | |
| E2fsck now uses less cpu time in pass 5 when large portions of the | |
| bitmaps are uninitialized. | |
| E2fsck will no longer segault when a corrupted file system has a bad | |
| extent, and removing it leads to a block needing to be deallocated. | |
| (Addresses SourceForge Bug: #2971800) | |
| E2fsck will catch termination signals (segfaults, bus errors, sigfpe) | |
| and print debugging information to make it easier to find potential | |
| problems. | |
| E2fsck will check to see if the bad block inode looks insane, and will | |
| skip trying to use if it certain fields which should be zero look | |
| non-zero. This is to avoid a corrupted bad block inode causing e2fsck | |
| to get confused and do more harm than good. | |
| If e2fsck modifies certain superblock fields which the kernel doesn't | |
| look at, it will now mark the superblock as dirty without marking the | |
| file system as changed. This avoids signalling the init scripts that | |
| a reboot is necessary, since the kernel isn't going to look at those | |
| fields, so it won't care if they have been changed. | |
| Fixed a bug in the libext2fs library (in the binary search routine of | |
| the icount abstraction) that could (very, very rarely) cause e2fsck to | |
| die in the middle of pass 1 or pass 2 processing. | |
| E2fsck will not try to do a discard operation if the -n option was | |
| specified on the command line. | |
| E2fsck now supports an extended "discard" option which will cause | |
| e2fsck to attempt discard all unused blocks after a full, successful | |
| file system check. | |
| E2fsck will check for the bad block inode to make sure it looks sane | |
| before trusting it, to avoid causing more harm than good to the file | |
| system. | |
| E2fsck now returns additional status bits in its exit code if it | |
| aborts early in the e2fsck run. | |
| E2fsck now correctly calculates the maximum file size in the case of | |
| the huge_file file system feature enabled without extents. | |
| The mke2fs and e2fsck programs now tries to use the punch hole command | |
| as a "discard" when operating on normal files. | |
| The e2image program now supports the qcow2 format, which is a more | |
| efficient way of capturing file system dumps. | |
| Mke2fs now supports the [devices] stanza in mke2fs.conf which allows | |
| per-device defaults to be specified in the configuration file. | |
| Mke2fs now supports the reserved_ratio relation in the [defaults] and | |
| [fs_types] section in mke2fs.conf. | |
| Mke2fs now creates extent-mapped directories for the root and | |
| lost+found directories. | |
| Mke2fs will skip zero'ing the journal if the extended option | |
| "lazy_journal_init" is specified. This can save a lot of time, but it | |
| does add a small amount of risk if the system crashes before the | |
| journal is overwritten entirely once. It is epsecially useful for | |
| testing. | |
| Mke2fs will now create file systems that enable user namespace | |
| extended attributes and with time- and mount count-based file | |
| system checks disabled. | |
| Mke2fs will not set a stride or strip size of one block based on block | |
| device attributes obtained from sysfs. | |
| Mke2fs now displays a progress report during the discard process. | |
| Mke2fs now handles extreme file system parameters correctly which | |
| previously caused the inodes per group to drop below 8, leading to a | |
| segfault. (The inodes per group must be a multiple of 8, but the code | |
| didn't correctly deal with an inodes per group count less than 8.) | |
| Mke2fs and tune2fs previously would give an error if the user tried | |
| setting the stride and stripe-width parameters to zero; but this is | |
| necessary to disable the stride and stripe-width settings. So allow | |
| setting these superblock fields to zero. (Addresses Google Bug: | |
| #4988557) | |
| Mke2fs now gives a warning if the auto-detected block size exceeds the | |
| system's page size. | |
| If the enable_periodic_fsck option is false in /etc/mke2fs.conf (which | |
| is the default), mke2fs will now set the s_max_mnt_count superblock | |
| field to -1, instead of 0. Kernels older then 3.0 will print a | |
| spurious message on each mount then they see a s_max_mnt_count set to | |
| 0, which will annoy users. (Addresses Debian Bug: #632637) | |
| The default mke2fs.conf now has entries for "big" and "huge", which | |
| are needed for very big file systems. | |
| The resize2fs program now has support for a new online resize ioctl | |
| that can support file systems > 16TB, once it arrives in v3.x kernels. | |
| Fixed bug which caused resize2fs to fail when shrinking an empty file | |
| system down to its minimal size. (Addresses Sourceforge Bug #3404051) | |
| Fixed tune2fs's mount options parsing. (Addresses Debian Bug: #641667) | |
| Allow tune2fs to remove external journals if the device can not be | |
| found. | |
| Debugfs's icheck will now correctly find inodes which use the | |
| searched-for block as an extended attribute block. | |
| Debugfs now has a new "punch" command which remove blocks from the | |
| middle of an inode. | |
| Debugfs now has a new "e2freefrag" command which analyzes the free | |
| space fragmentation of the file system, using the same code as the | |
| e2freefrag program. | |
| Debugfs now has a "filefrag" command which displays information about | |
| a file's fragmentation. | |
| Add support to build a metadata-only, read-only, stripped-down version | |
| of debugfs called rdebugfs. | |
| Fixed a potential stack overrun bug in debugfs. | |
| The badblocks program now correctly recovers from I/O errors when | |
| direct I/O is being used. The badblocks command now also supports a | |
| -B option which forces the use of buffered I/O, and the -v option will | |
| provide a more detailed breakdown of read, write, and failed | |
| comparison errors. | |
| Added e4defrag tool which uses the EXT4_IOC_MOVE_EXT ioctl. | |
| Added support for journals larger than 2GB. | |
| Support using both hard links and symlinks when installing e2fsprogs. | |
| Add overflow checking to tune2fs -i's fsck interval, which must fit in | |
| a 32-bit field. | |
| The debugfs command now has a new 'blocks' command which prints out | |
| data blocks of a particular inode in a format which is useful for | |
| scripting. | |
| Filefrag will report 0 extents correctly in verbose mode. (Addresses | |
| RedHat Bugzilla: #653234) | |
| Filefrag has been fixed so its -v report prints the correct expected | |
| block number (previously there had been an off-by-one error). In | |
| addition, it will now display the number of contiguous extents when -v | |
| is not specified. This makes it consistent with the number of extents | |
| printed when the -v option was specified. In addition, the number of | |
| contiguous extents is far more interesting/useful than the number of | |
| physical extents for very large files. (Addresses Debian Bug: | |
| #631498, #644792) | |
| Logsave's usage message has been fixed. (Addresses Debian Bug: | |
| #619788) | |
| Avoid an infinite loop in ext2fs_find_block_device() if there are | |
| symlink loops in /dev caused by a buggy udev. | |
| Added a useful "fallocate" program to the contrib directory. | |
| Fixed an ABI compatibility problem in libext2fs which broke the dump | |
| program. Also added back some macros which dump needed so it could | |
| compile against the latest version of ext2_fs.h (Addresses Debian Bug: | |
| #636418) | |
| Fixed parsing of MNTOPT_ options for tune2fs and debugfs (Addresses | |
| Debian Bug: #641667) | |
| Added internationalization support for libcom_err error table strings. | |
| Fixed various spelling mistakes found in various output strings found | |
| by I18N translators. | |
| Update translations: French, Chinese, Germany, Indonesian, Swedish, | |
| Vietnamese, Polish, Dutch, Czech. (Addresses Debian Bugs: #520985, | |
| #620659) | |
| Fixed various Debian Packaging issues. (Addresses Debian Bugs: | |
| #614662, #632169, #641838, #627535, #629355) | |
| Updated/clarified man pages. (Addresses Debian Bugs: #639411, | |
| #642193, #634883) | |
| Programmer's Notes | |
| ------------------ | |
| Initial support for quota as an integrated feature, where the quota | |
| files are hidden system files that are automatically maintained by | |
| e2fsck is present, although disabled by default. It must be enabled | |
| by using the configure option --enable-quota. | |
| Reserved the on-disk fields for the metadata checksum and snapshot | |
| features, which are currently in development. | |
| The ext2fs library now has the new functions ext2fs_punch(), | |
| ext2fs_get_memzero() and ext2fs_file_get_inode(). | |
| The ext2fs library now has support for calculating the crc32c checksum | |
| (via the new functions ext2fs_crc32c_be and ext2fs_crc32c_le). | |
| The I/O manager now supports the discard operation. | |
| Reserved file system code points for new 1st class quota feature. | |
| Shortened the compilation lines by moving the autoconf defines to | |
| a config.h header file. | |
| Fixed a potential free of an unitialized pointer in | |
| ext2fs_update_bb_inode(). | |
| Fixed miscellaneous gcc -Wall and coverity warnings. | |
| Fixed portability issues for Mac OS X, Hurd, and FreeBSD. | |
| Fixed a build failure when OMIT_COM_ERR is defined. | |
| Improved error checking and fixed memory leaks caused by error return | |
| paths. | |
| Add ext2fs_flush2() and ext2fs_close2() which takes a flag to allow | |
| the fsync() to be skipped. | |
| Added a test for extent-mapped journals by mke2fs and tune2fs. | |
| Added a test for creating a large (over 4GB) journal using mke2fs. | |
| Added a test to make sure the inode size remains constant. | |
| The regression test script now prints the list of which tests failed. | |
| The regression test system now uses /tmp for its scratch files, which | |
| is often a tmpfs mounted file system and hence much faster. | |
| The i_e2image test was fixed so it works with valgrind. | |
| Tests that rely on debugfs are now skipped if debugfs wasn't built. | |
| Fixed the dependencies for "make check" so all required dependencies | |
| are built before running the gression tests. | |
| A link to com_err.h is installed in $(includedir) during a "make install". | |
| The po/*.gmo files are automatically rebuilt if they are missing or | |
| out of date. This helps out Debian packaging. | |
| Allow ext2fs_get_memalign() to compile on systems that don't have | |
| posix_memalign(). | |
| Fixed a namespace leak in libext2fs (tdb_null). | |
| E2fsprogs 1.41.14 (December 22, 2010) | |
| ===================================== | |
| Fix spurious complaint in mke2fs where it would complain if the file | |
| system type "default" is not defined in mke2fs.conf. | |
| The resize2fs program will no longer clear the resize_inode feature | |
| when the number reserved group descriptor blocks reaches zero. This | |
| allows for subsequent shrinks of the file system to work cleanly for | |
| flex_bg file systems. | |
| The resize2fs program now handles devices which are exactly 16T; | |
| previously it would give an error saying that the file system was too | |
| big. | |
| E2fsck (and the libext2fs library) will not use the extended rec_len | |
| encoding for file systems whose block size is less than 64k, for | |
| consistency with the kernel. | |
| Programming notes | |
| ----------------- | |
| E2fsprogs 1.41.13 would not compile on big-endian systems. This has | |
| been fixed. (Addresses Sourceforge Bug: #3138115) | |
| The ext2fs_block_iterator2() function passed an incorrect ref_offset | |
| to its callback function in the case of sparse files. (Addresses | |
| Sourceforge Bug: #3081087) | |
| Fix some type-punning warnings generated by newer versions of gcc. | |
| E2fsprogs 1.41.13 (December 13, 2010) | |
| ===================================== | |
| E2fsck now supports the extended option "-E journal_only", which | |
| causes it to only do a journal replay. This is useful for scripts | |
| that want to first replay the journal and then check to see if it | |
| contains errors. | |
| E2fsck will now support UUID= and LABEL= specifiers for the -j option | |
| (which specifies where to find the external journal). (Addresses | |
| Debian Bug #559315) | |
| E2fsck now has support for the problems/<problem code>/force_no | |
| configuration option in e2fsck.conf, which forces a problem to not be | |
| fixed. | |
| Dumpe2fs will now avoid printing large negative offsets for the bitmap | |
| blocks and instead print a message which is a bit more helpful for | |
| flex_bg file systems. | |
| Mke2fs will now check the file system type (specified with the -t | |
| option) to make sure it is defined in the mke2fs.conf file; if it is | |
| not, it will print an error and abort. If the usage type (specified | |
| with the -T option) is not defined in mke2fs.conf, mke2fs will print a | |
| warning but will continue. (Addresses Debian Bug #594609) | |
| Clarified error message from resize2fs clarifying that on-line | |
| shrinking is not supported at all. (Addresses Debian Bug #599786) | |
| Fix an e2fsck bug that could cause a PROGRAMMING BUG error to be | |
| displayed. (Addresses Debian Bug #555456) | |
| E2fsck will open the external journal in exclusive mode, to prevent | |
| the journal from getting truncated while it is in use due to a user | |
| accidentally trying to run e2fsck on a snapshotted file system volume. | |
| (Addresses Debian Bug #587531) | |
| Fix a bug in e2fsck so it has the correct test for the EOFBLOCKS_FL | |
| flag. | |
| The tune2fs program can now set the uninit_bg feature without | |
| requiring an fsck. | |
| The tune2fs, dumpe2fs, and debugfs programs now support the new ext4 | |
| default mount options settings which were added in 2.6.35. | |
| The e2fsck and dumpe2fs programs now support the new ext4 superblock | |
| fields which track where and when the first and most recent file | |
| system errors occurred. These fields are displayed by dumpe2fs and | |
| cleared by e2fsck. These new superblock fields were added in 2.6.36. | |
| Debugfs now uses a more concicse format for listing extents in its | |
| stat command. This format also includes the interior extent tree | |
| blocks, which previously was missing from stat's output for | |
| extent-based files. | |
| Debugfs has a new option, -D, which will request Direct I/O access of | |
| the file system. | |
| Mke2fs will skip initializing the inode table if a device supports | |
| discard and the discard operation will result in zero'ed blocks. | |
| Badblocks will now correctly backspace over UTF-8 characters when | |
| displaying its progress bar. (Addresses Gentoo Bug #309909; Addresses | |
| Debian Bugs #583782 and #587834) | |
| E2freefrag will now display the total number of free extents. | |
| Resize2fs -P no longer requires a freshly checked filesystem before | |
| printing the minimum resize size. | |
| Fixed a floating point precision error in a binary tree search routine | |
| that can lead to seg fault in e2fsck and resize2fs. | |
| Fixed a bug in e2fsck where if both the original and backup superblock | |
| are invalid in some way, e2fsck will fail going back to the original | |
| superblock because it didn't close the backup superblock first, and | |
| the exclusive open prevented the file system from being reopened. | |
| Fixed a big in e2freefrag which caused getopt parsing to fail on | |
| architectures with unsigned chars. (Addresses Gentoo Bug: #299386) | |
| Clarified an mke2fs error message so a missed common in an -E option | |
| (i.e., mke2fs -t ext4 -E stride=128 stripe-width=512 /dev/sda1") | |
| results in a more understandable explanation to the user. | |
| Mke2fs now displays the correct valid inode ratio range when | |
| complaining about an invalid inode ratio specified by the user. | |
| Mke2fs now understands the extended option "discard" and "nodiscard", | |
| and the older option -K is deprecated. The default of whether | |
| discards are enabled by default can be controled by the mke2fs.conf | |
| file. | |
| Mke2fs's handling of logical and physical sector sizes has been | |
| improved to reflect the fact that there will be some SSD's with 8k and | |
| 16k physical sectors arriving soon. Mke2fs will no longer force block | |
| size to be the physical sector size, since there will be devices where | |
| the physical sector size is larger than the system's page size, and | |
| hence larger than the maximal supported block size. In addition, if | |
| the minimal and optimal io size are not exported by the device, and | |
| the physical sector size is larger than the block size, the physical | |
| sector size will be used to set the Raid I/O optimization hints in the | |
| superblock. | |
| E2fsck will now display a better, more specific error message when the | |
| user enters a typo'ed device name, instead of blathering on about | |
| alternate superblocks. | |
| Fixed various Debian Packaging Issues | |
| Updated/clarified man pages (Addresses Debian Bugs: #580236, #594004, | |
| #589345, #591083; Addresses Launchpad Bug: #505719) | |
| Update the Chinese, Chzech, Dutch, French, Germany, Indonesian, | |
| Polish, Swedish, and Vietnamese translations. | |
| Programmer's Notes | |
| ------------------ | |
| Fix a dependency definition for the static and profiled blkid | |
| libraries which could cause compile failures in some configurations. | |
| (Addresses Debian Bug: #604629) | |
| Add support for Direct I/O in the Unix I/O access layer. | |
| Fixed a memory leak in the Unix I/O layer when changing block sizes. | |
| Fixed minor memory leaks in mke2fs. | |
| Added a new function to the ext2fs library, ext2fs_get_memalign(). | |
| The tst_super_size test program will check to make sure the superblock | |
| fields are correctly aligned and will print them out so they can be | |
| manually checked for correctness. | |
| Fixed some makefile dependencies for test programs in lib/ext2fs. | |
| Reserved the feature flags and superblock fields needed for the Next3 | |
| snapshot feature. | |
| Reserved the feature flags for EXT4_FEATURE_INCOMPAT_DIRDATA and | |
| EXT4_INCOMPAT_EA_INODE. | |
| E2fsprogs 1.41.12 (May 17, 2010) | |
| ================================ | |
| Mke2fs now gives a correct error message if the external journal | |
| device is not found. (Addresses Red Hat Bug #572935) | |
| Resize2fs -P will now refuse to print a minimum size if the file | |
| system is not clean. Previously it would go ahead and print a minimum | |
| size anyway, which might not be correct, leading to user confusion. | |
| E2fsck now tests for extents that begin at physical block 0 and | |
| rejects them as invalid. (Addresses Google Bug: #2573806) | |
| Fixed a bug in e2fsck which could cause it to crash when trying to | |
| remove an invalid extent and the block bitmaps hadn't yet been loaded. | |
| (Addresses SourceForge Bug: #2971800) | |
| E2fsck now will completely skip time-based checks if the system clock | |
| looks insane or the option broken_system_clock is set in | |
| /etc/e2fsck.conf. | |
| E2fsck would previously report an i_blocks corruption for a 4T file | |
| created using posix_fallocate; this bug has been fixed. | |
| E2fsck will now correctly mark a sparse journal as invalid and will | |
| delete and recreate the journal to address the problem. | |
| E2fsck would previously incorrectly ask the user whether she would | |
| like to abort the file system check after finding a problem --- and | |
| then abort regardless of the user's answer. This is annoying, and | |
| has been fixed. | |
| E2fsck can now continue even if it fails to recreate the resize | |
| inode; previously it would just abort the file system check | |
| altogether. | |
| E2fsck could potentially remove directory entries for inodes found in | |
| the unused region of the inode table; this would generally happen on | |
| ext4 file systems that do not use journaling. This bug has been fixed | |
| by not clearing these directory entries once it has been established | |
| that bg_unused_inodes may not be trustworthy; once pass #2 has been | |
| completed, e2fsck will restart the file system check from the | |
| beginning, and then it will be safe to delete any directory entries | |
| pointing to inodes that appear to be deleted. (Addresses Google Bug: | |
| #2642165) | |
| E2fsck will not try to set the block group checksums if the user | |
| cancels the fsck with a control-C. It's a bad idea to set the | |
| checksums if e2fsck hasn't been completed, and it often results an the | |
| error message, "Inode bitmap not loaded while setting block group | |
| checksum info". (Addresses Launchpad Bug: #582035) | |
| The mke2fs program now queries the kernel for the physical as well as | |
| the logical sector size, and will not allow a blocksize below the | |
| logical, and will strongly encourage a blocksize at least as big as | |
| the physical blocksize. This is needed for 4k sector drives that | |
| emulate 512 byte sector sizes. | |
| Mke2fs will now allow a flex_bg size of 1. This is unusual, and | |
| rarely needed, but it is a legal value. | |
| E2fsck will check for cases where the EOFBLOCKS_FL is set when it is | |
| not needed, and offer to clear it; this is a sign of a kernel bug, but | |
| more importantly, some released kernels may crash when this situation | |
| is encountered on ext4 file systems. (Addresses Google Bug: #2604224) | |
| E2fsck will use the EOFBLOCKS_FL flag exclusively to check whether | |
| i_size is correct. (Kernels starting with 2.6.34 will set | |
| EOFBLOCKS_FL.) | |
| The com_err library will now only output ^M (a CR character) when the | |
| tty is in raw mode. | |
| Update the Czech, Chinese, Dutch, French, Germany, Indonesian, Polish, | |
| and Vietnamese translations. | |
| Fixed various Debian packaging issues --- see debian/changelog for | |
| details. (Addresses Debian Bugs: #571247, #563487) | |
| Programmer's Notes | |
| ------------------ | |
| The regression test suite now uses its own mke2fs.conf file, so that | |
| downstream distributions want change the mke2fs.conf file which is | |
| distributed in the RPM or dpkg file, without worrying about screwing | |
| up the regression test results. | |
| Always build namei.o so that building with configure --disable-debugfs | |
| works correctly. Long-term, if we care about reduced e2fsprogs | |
| builds, we need a more general solution for deciding what .o files are | |
| needed for a particular build. Given that install floppies are going | |
| (gone?) the way the dodo bird, we probably don't care, though. | |
| (Addresses Sourceforge Bug: #2911433) | |
| Add configure options --enable-symlink-build and | |
| --enable-symlink-install, which allow e2fsprogs be built using | |
| symlinks instad of hard links, and to be installed using symlinks | |
| instead of hard links, respectively. It is useful when the file | |
| system where the build is taking place, or the file system where | |
| e2fsprogs is installed, can't handle hard links for some reason. | |
| (Addresses Sourceforge Bug: #1436294) | |
| Fixed compile warning in mke2fs.c. | |
| E2fsprogs 1.41.11 (March 14, 2010) | |
| ================================== | |
| E2fsck will no longer give a fatal error and abort if the physical | |
| device has been resized beyond 2**32 blocks. (Addresses Launchpad | |
| Bug: #521648) | |
| Debugfs has a bug fixed so that "logdump -b <blk>" now properly shows | |
| the allocation status of the block <blk>. (Addresses Debian Bug: | |
| #564084) | |
| E2fsck now prints a much more emphatic and hopefully scary message | |
| when a file system is detected as mounted while doing a read/write | |
| check of the filesystem. Hopefully this will dissuade users from | |
| thinking, "surely that message doesn't apply to *me*" :-( | |
| E2fsck -n will now always open the file system read-only. We now | |
| disallow certain combination of options which previously were manual | |
| exceptions; this is bad because it causes users to think they are | |
| smarter than they really are. So "-n -c", "-n -l", "-n -L", and "-n | |
| -D" are no longer supported. (Addresses Launchpad Bug: #537483) | |
| In e2fsprogs 1.41.10, mke2fs would ask for confirmation to proceed if | |
| it detected a badly aligned partition. Unfortunately, this broke some | |
| distribution installation scripts, so it now just prints the warning | |
| message and proceeds. (Addresses Red Hat Bug: #569021. Addresses | |
| Launchpad Bug: #530071) | |
| Mke2fs would take a long time to create very large journal files for | |
| ext4. This was caused by a bug in ext2fs_block_iterate2(), which is | |
| now fixed. | |
| E2fsck now understands the EOFBLOCKS_FL flag which will be used in | |
| 2.6.34 kernels to make e2fsck not complain about blocks deliberately | |
| fallocated() beyond an inode's i_size. | |
| E2fsprogs 1.41.10 introduced a regression (in commit b71e018) where | |
| e2fsck -fD can corrupt non-indexed directories when are exists one or | |
| more file names which alphabetically sort before ".". This can happen | |
| with ext2 filesystems or for small directories (take less than a lock) | |
| which contain filenames that begin with a space or some other | |
| punctuation mark. (Addresses Debian Bug: #573923, Addresses Launchpad | |
| Bug: #525114) | |
| Programmer's Notes | |
| ------------------ | |
| Add new test, f_rehash_dir, which checks to make sure e2fsck -D works | |
| correctly. | |
| The libcom_err function now has support for Heimdal's com_right_r | |
| function(). (Addresses Sourceforge Bug: #2963865, Addresses Debian | |
| Bug: #558910) | |
| E2fsprogs 1.41.10 (February 7, 2010) | |
| ==================================== | |
| Fix resize2fs bug which causes it to access invalid memory. | |
| Add libss support for libreadline.so.6. | |
| Fix e2fsck's check for extent-mapped directory with an incorrect file | |
| type. | |
| Add new e2fsck.conf configuration option, default/broken_system_clock | |
| to support systems with broken CMOS hardware clocks. Also, since too | |
| many distributions seem to have broken virtualization scripts now, | |
| e2fsck will by default accept dates which are off by up to 24 hours by | |
| default. (Addresses Debian Bugs: #559776, #557636) | |
| Fix a bug where mke2fs may not use the best placement of the inode | |
| table when there is only room for a single block group in the last | |
| flex_bg. | |
| E2fsck is now smarter when it needs to allocate blocks in the course | |
| of fixing file system problems. This reduces the number of spurious | |
| differences found in pass #5. | |
| E2fsck will no longer rehash directories which fit in a single | |
| directory block. | |
| E2fsck now correctly handles holes in extent-mapped directories (i.e., | |
| sparse directories which use extents). | |
| Fix big-endian problems with ext2fs_bmap() and ext2fs_bmap2(). | |
| Fix a bug in filefrag where on platforms which can allow file systems | |
| with 8k blocks, that it doesn't core dump when it sees a file system | |
| with 8k block sizes. (Thanks to Mikulas Patocka for pointing this | |
| out.) | |
| E2fsck will correctly fix directories that are have an inaccurate | |
| i_size as well as other problems in a single pass, instead of | |
| requiring two e2fsck runs before the file system is fully fixed. | |
| Fix e2fsck so it will correctly find and detect duplicate directory | |
| entries for non-indexed directories. ( Addresses Sourceforge Bug: | |
| #2862551) | |
| Mke2fs will use BLKDISCARD to pre-discard all blocks on an SSD or | |
| thinly-provisioned storage device. This can be disabled using the -K | |
| option. | |
| Enhance libext2fs so it works around bug in Linux version 2.6.19 | |
| and earlier where the /proc/swaps file was missing the header on | |
| the first line. | |
| Fix bug in Linux version 2.6.19 and earlier where the /proc/swaps file | |
| was missing the header on the first line. | |
| Fix some big-endian bugs in e2fsck and libext2fs. | |
| Fix resize2fs so it works correctly on file systems with external | |
| journals instead of failing early with the error "Illegal inode | |
| number". | |
| Fix libss so that it does not seg fault when using a readline library | |
| which does not supply a readline_shutdown() function. | |
| Updated dumpe2fs's usage message so it correctly gives the right | |
| arguments summary for "-o superblock=<num>" and "-o blocksize=<num>". | |
| (Addresses Launchpad Bug: #448099) | |
| Teach libext2fs to ignore the high 32 bits of the i_blocks field | |
| when huge_file file system feature is set, but the inode does not | |
| have the HUGE_FILE_FL flag set. | |
| Fix e2fsck's handling of 64-bit i_blocks fields. | |
| E2fsck will now print "Illegal indirect block", "Illegal | |
| double-indirect block", etc., instead of "Illegal block #-1" or | |
| "Illegal block #-2", etc. This makes it easier for users to | |
| understand what has gone wrong. (Addresses SourceForge Bug: #2871782) | |
| Mke2fs now will obtain get device topology information from blkid and | |
| use it to populate the superblock stride and stripe sizes. It will | |
| also warn if the block device is misaligned | |
| Fix file descriptor leaks in fsck and debugfs. (Addresses Novell Bug: | |
| ##524526) | |
| Fix the libext2fs library code to round up the bitmap size to a 4-byte | |
| boundary, to prevent spurious seg faults caused by the x86 | |
| architecture. This doesn't affect Linux systems, but was a major | |
| problem on a number of *BSD systems. (Addresses Sourceforge Bug: | |
| #2328708) | |
| Fix resize2fs's minimum size required for a file system so it doesn't | |
| fail when "resize2fs -M" is run. (Addresses RedHat Bugzilla: #519131) | |
| Dumpe2fs now prints summary information about the contents of the | |
| journal. | |
| Avoid printing scary error messages when e2fsck starts running | |
| problems on low-memory systems, as it tends to panic and mislead the | |
| user. (Addresses Debian Bug: #509529) | |
| Fix blkid's modules.dep parser so it handles compressed (.ko.gz) | |
| modules files. (Address Red Hat Bug: #518572) | |
| Fix tune2fs so it can add a journal when an extent-enabled file system | |
| is mounted. (Addresses Launchpad bug: #416648) | |
| Update Czech, Indonesian, Polish and Vietnamese translations (from the | |
| Translation Project). | |
| Update/clarify man pages. (Addresses Sourceforge Bug: #2822186) | |
| Fixed various Debian packaging issues --- see debian/changelog for | |
| details. (Addresses Debian Bugs: #540111) | |
| Programmer's Notes | |
| ------------------ | |
| The configure script supports the --with-cc, --with-ccopts, and | |
| --with-ldopts options. Instead, the more standard use of CC=, | |
| CCFLAGS=, and LDFLAGS= in the configure command line is used instead. | |
| Also, --with-ld, which never worked, was also removed. | |
| (Addresses Sourceforge Bug: #2843248) | |
| The in-tree header files are only used if the in-tree uuid or blkid | |
| libraries are used. Otherwise, use the system-provided uuid or blkid | |
| header files if using the system-provided libraries. | |
| Fix some build failures caused by --disable-* configure options. | |
| Work around a bug in autoconf 2.64. | |
| E2fsprogs 1.41.9 (August 22, 2009) | |
| ================================== | |
| Fix a bug in e2fsck routines for reallocating an inode table which | |
| could cause it to loop forever on an ext4 filesystem with the FLEX_BG | |
| filesystem feature with a relatively rare (and specific) filesystem | |
| corruption. This fix causes e2fsck to try to find space for a new | |
| portion of the inode table in the containing flex_bg, and if that | |
| fails, the new portion of the inode table will be allocated in any | |
| free space available in the filesystem. | |
| Make e2fsck less annoying by only asking for permission to relocate a | |
| block group's inode table once, instead of for every overlapping | |
| block. Similarly, only ask once to recompute the block group | |
| checksums, instead of once for each corrupted block group's checksum. | |
| Fix filefrag to avoid print the extent header if the FIEMAP ioctl is | |
| not present, and it needs to fall back to using the FIBMAP ioctl. | |
| Fix filefrag to correctly print the number of extents for zero-length | |
| files. (Addresses Debian Bug: #540376) | |
| Filefrag now has a -B option which forces the use of the FIBMAP ioctl | |
| to more easily debug the FIBMAP code. | |
| Fixed filefrag for non-extent based files. | |
| Add a new program, e2freefrag, which displays information about the | |
| free space fragmentation in an ext2/3/4 filesystem. | |
| Fix inode resizing via tune2fs -I so that it works correctly in the | |
| face of non-empty bad blocks inodes, and if the filesystem was | |
| formatted using the "mke2fs -E stride=N" option for RAID arrays. | |
| Fix regression in ext2fs_extent_set_bmap() caused e2fsck -fD to fail | |
| and corrupt large directories if the directory needs to shrink by more | |
| than one block. (Addresses Debian Bug: #537510) | |
| Fix e2fsck's buggy_init_scritps=1 so that the if the last write and/or | |
| last mount times are in the future, they are corrected even if | |
| buggy_init_scripts is set. This is needed because otherwise resize2fs | |
| will refuse to resize the filesystem, even after running "e2fsck -f". | |
| (Addresses Launchpad bug: #373409) | |
| E2fsck will now print much fuller information when the last mount time | |
| or last written time is in the future, since most people can't seem to | |
| believe their distribution has buggy init scripts, or they have a | |
| failed CMOS/RTS clock battery. | |
| Enhance dumpe2fs to dump the extent information via the 'stat' | |
| command, and more detailed extent information via the new command | |
| 'dump_extents'. | |
| Update French, Polish, Czech, and Sweedish translation from the | |
| Translation Project. | |
| Fixed various Debian packaging issues --- see debian/changelog for | |
| details. | |
| Programmer's Notes | |
| ------------------ | |
| Fixed miscellaneous gcc -Wall warnings. | |
| Fixed memory leak in error path in ext2fs_block_iterate2() | |
| Fixed non-Linux build of the intl directory by adding support for the | |
| E/Q/V macros. | |
| The bitmap read/write functions now treat uninitialized bitmaps as | |
| unallocated; this fixes a number of problems in all e2fsprogs for ext4 | |
| filesystems when there is a need to allocate new blocks or inodes, and | |
| there aren't any free blocks or inodes in the already-used block | |
| groups. | |
| Improve ext2fs_extent_set_bmap() to avoid creating new extents which | |
| get inserted into the extent tree when they are not needed. | |
| E2fsprogs 1.41.8 (July 11, 2009) | |
| ================================ | |
| Fix resize2fs's online resizing, fixing a regression which in | |
| e2fpsrogs 1.41.7. (Addresses Debian Bug: #535452) | |
| Fix potential filesystem corruptions caused by using resize2fs to | |
| shrinking ext4 filesystems with extents enabled. (Addresses Red Hat | |
| Bug: #510379) | |
| Optimize uuid_generate() to avoid running uuidd if it is not setuid or | |
| setgid and the currently running program doesn't have write access to | |
| the uuidd work directory. | |
| Add safety checks (for non-Linux systems) so that uuidd isn't run with | |
| file descriptors 0, 1, and 2 closed; and if they are closed, uuidd | |
| will be careful not to close the file descriptor for its unix domain | |
| socket when it detaches itself from the controlling tty. Also add | |
| safety checks so that if the unix domain socket between the uuid | |
| library and uuidd program is closed for any reason, both the library | |
| and the uuidd will return an appropriate error code instead of looping | |
| in an infinite loop. | |
| The e2croncheck script, which creates an LVM snapshot and then checks | |
| the ext3/4 filesystem via the LVM snapshot, has been added to the | |
| contrib directory. | |
| Fix filefrag program for files that have more than 144 extents. | |
| Update French, Polish, Czech, Indonsian, and Sweedish translation from | |
| the Translation Project. | |
| Fixed various Debian packaging issues --- see debian/changelog for | |
| details. (Addresses Debian Bug #535530) | |
| Update/clarify man pages. | |
| Programmer's Notes | |
| ------------------ | |
| Fix compilation problem when configured with --disable-uuid. | |
| Don't build uuidgen if configured with --disable-uuid. | |
| Add the new library function ext2fs_test_inode_bitmap_range(), and | |
| optimized ext2fs_test_block_bitmap_range(), which will be needed for | |
| future optimizations for e2fsck. | |
| Fix makefile dependencies for libcom_err so that the Makefiles work | |
| well on non-GNU make program. (Addresses Sourceforge Patches: #2813809) | |
| Enhance the build system so that the full set of commands executed by | |
| the Makefiles are displayed, instead of the Linux kernel summary | |
| output, if the build was configured with --enable-verbose-makecmds, or | |
| if GNU make is in use and the V variable is non-null, i.e., via "make | |
| V=1". | |
| E2fsprogs 1.41.7 (June 29, 2009) | |
| ================================ | |
| Fix a bug in libext2fs which can cause e2fsck and resize2fs to write | |
| uninitalized data into the portion of the inode beyond the first 128 | |
| bytes when operating on inodes mapped via extents; potentially | |
| corrupting filesystems. | |
| Fix memory leaks in e2fsprogs, including a very large memory leak | |
| which can cause e2fsck to run out of memory when checking very large | |
| filesystems using extents. | |
| The logsave program will now filter out the ^A and ^B characters when | |
| writing to the console. | |
| Harden ext2fs_validate_entry() so that lsdel will not read beyond the | |
| end of the block even if the directory block is corrupted. | |
| Fix debugfs from core dumping if the logdump command fails to open the | |
| output file. | |
| Enhance badblocks to print the currently tested block number when | |
| interrupted with ^C. | |
| Fix lsattr to exit with a non-zero status when it encounters errors. | |
| (Addresses RedHat Bugzilla #489841) | |
| Fix e2fsprogs to use the same encoding for rec_len in 64k (and larger) | |
| filesystems as the kernel when encoding rec_len >= 64k. For 64k | |
| filesystems (currently all that is supported by e2fsprogs, this is | |
| only a minor corner case). | |
| Resize2fs will now update the journal backup fileds in the sup0erblock | |
| if the journal is moved; this avoids an unnecessary full fsck after | |
| resizing the filesystem. (Addresses RedHat Bugzilla: #505339) | |
| Fix libext2fs to properly initialize i_extra_size when creating the | |
| journal and resize inodes. | |
| Change badblocks to allow block sizes larger than 4k. | |
| Fix filefrag progam so it correctly checks for errors from the fiemap ioctl. | |
| Update Chinese and Czech translation from the Translation Project. | |
| Clean up various man pages. (Addresses Debian Bug #531385 and #523063) | |
| Programmer's Notes | |
| ------------------ | |
| Add --disable-libuuid option to configure which uses an in-system | |
| installed version of libuuid; the private version is enabled by | |
| default. | |
| Add --valgrind-leakcheck option to the test_script program which runs | |
| valgrind with the appropriate options to find memory leaks. | |
| E2fsprogs 1.41.6 (May 30, 2009) | |
| =============================== | |
| Fix a critical regression in e2fsck introduced version 1.41.5 which | |
| can undo updates to the block group descriptors after a journal replay. | |
| If e2fsck receives an I/O error while replaying the journal, prompt | |
| the user whether they want to ignore the error or not; if e2fsck is | |
| run in preen mode, force fsck to abort the preen pass. | |
| Fix a bug which would cause e2fsck to core dump if the filesystem | |
| contains a corrupt extent header, and the user declines to clear the | |
| inode. (Addresses Sourceforge Bug: #2791794) | |
| Fix e2fsck to restart only once in the case of multiple block groups | |
| which inodes in use that are in the uninitialized part of the block | |
| group's inode table. | |
| To reduce user confusion, if the /etc/mtab file is missing | |
| ext2fs_check_mount_point and ext2fs_check_if_mounted will return a | |
| new, explicit error code to indicate this case. This will cause | |
| e2fsck to give a clearer error message when the user is using buggy | |
| rescue CD's that don't properly set up /etc/mtab. (Addresses Debian | |
| Bug: #527859) | |
| Fix e2fsck so that if the primary group descriptors are corrupted, but | |
| the backup superblock is entirely invalid, to go back to using (and | |
| fixing) the priary group descriptors instead of completely giving up | |
| on the filesystem. (Addresses Debian Bug: #516820) | |
| Change e2fsck to not abort a preen pass if an inode is found to have | |
| i_file_acl_hi non-zero. Ext3 filesystems don't care, and newer | |
| kernels (post 2.6.29) will ignore this field. So let's fix it | |
| automatically during the preen pass instead of forcing the user to fix | |
| this up manually. (Addresses Debian Bug: #526524) | |
| Add resource tracking for e2fsck passes 1b through 1d. | |
| Speed up e2fsck by eliminating unnecessary journal checks if the | |
| filesystem is already mounted and doesn't need recovery (since the | |
| kernel would have run the journal when the filesystem was mounted.) | |
| Also speed up e2fsck by avoiding unnecessary block group descriptor | |
| updates in ext2fs_close(). | |
| Add support to chattr to migrate inodes from using direct/indirect | |
| blocks to extents. | |
| Avoid corrupting the filesystem if there is an attempt to shrink a | |
| filesystem using resize2fs smaller than posible by making | |
| ext2fs_set_bmap() more careful not to delete the old block until the | |
| new block can be inserted. In addition, fix a bug in how the minimum | |
| size of the filesystem (plus a safety margin) is calculated, and | |
| modify resize2fs to refuse to shrink the filesystem below that minimum | |
| size without the force flag. | |
| Teach blkid to try to figure out DM device names using take advantage | |
| of information in sysfs when running on kernels (2.6.29 and later) | |
| which provide this information in /sys/block/dm-<N>/dm/name; this is | |
| much faster than scanning for the devncie number in /dev/mapper. | |
| Fix blkid to prefer /dev/mapper/<name> device names instad of the | |
| private /dev/dm-X names. | |
| Add an -a option to debugfs's close_filesys command which writes any | |
| changes to the superblock or block group descriptors to all of the | |
| backup superblock locations. | |
| Add support to the filefrag program to use the FIEMAP ioctl. | |
| Update Chinese translation from the Translation Project. | |
| Clean up various man pages. (Addresses Red Hat Bugzilla: #502971 and | |
| Launchpad Bug: #381854) | |
| Fixed various Debian packaging issues --- see debian/changelog for | |
| details. (Addresses Debian Bug #506064) | |
| Programmer's Notes | |
| ------------------ | |
| Add test code to make sure e2fsck's problem.c doesn't have two problem | |
| codes assigned to duplicate values. | |
| Avoid using a hard-coded path for /bin/rm in block's test_probe.in. | |
| (Addresses Sourceforge Bug: #2780205) | |
| Clean up e2fsck by removing #ifdef RESOURCE_TRACK by adding an empty | |
| function declaration for init_resource_track() and | |
| print_resource_track() when RESOURCE_TRACK is not defined. | |
| The test code which is used to build the tst_csum progam has been | |
| moved from from tst_csum.c into csum.c under an #ifdef DEBUG to to | |
| avoid compile problems caused by not having a prototype for | |
| ext2fs_group_desc_csum(). (Addresses Sourceforge Bug #2484331) | |
| Update the config.guess and config.sub file to the latest from the | |
| FSF, to allow e2fsprogs to build on the avr32 platform. (Addresses | |
| Debian Bug: #528330) | |
| Add a new function, ext2fs_extent_open2(), which behaves like | |
| pext2fs_extent_open(), but uses the user-supplied inode structure | |
| when opening an extent instead of reading the inode from disk. | |
| E2fsprogs 1.41.5 (April 23, 2009) | |
| ================================= | |
| Fix a number of filesystem corruption bugs in resize2fs when growing | |
| or shrinking ext4 filesystems off-line (i.e., when the ext4 filesystem | |
| is not mounted). | |
| Debugfs can now set i_file_acl_high via the set_inodes_field command, | |
| and print a 64-bit file acl. This is useful for debugging filesystem | |
| corruptions where the high bits of i_file_acl_high are set. E2fsck | |
| will detect and fix non-zero i_file_acl_high on 32-bit filesystems | |
| since some Linux kernel versions pay attention to this field even when | |
| they shouldn't. | |
| Speed up e2fsck when checking clean filesystems by avoiding | |
| unnecessary block reads, and coalescing the block group descriptor | |
| blocks so they are read using a single read operation. | |
| The libuuid library will now close all file descriptors before running | |
| uuidd. This avoids problems when the calling program has open sockets | |
| which then never get closed because uuidd is a long-running helper | |
| daeomn. (Addresses Launchpad bug: #305057) | |
| In order to avoid unnecessary full filesystem checks by e2fsck after | |
| an on-line resize, e2fsck will ignore the NEEDS_RECOVERY flag set on | |
| the backup superblocks. (Addresses Red Hat Bugzilla: #471925) | |
| Mke2fs will avoid trying to create the journal when run in | |
| superblock-only mode (mke2fs -S), since the left-over journal in the | |
| inode table will cause mke2fs to fail. | |
| Fix a bug in libext2fs functions that check to see if a particular | |
| device or filesystem image is mounted, which would cause these | |
| functions to report that a file identical to the (relative) pathname | |
| used by a pseudo-filesystem was mounted when in fact it was not. | |
| Update Czech translation from the Translation Project. | |
| Add Chinese (simplified) translation from the Translation Project. | |
| Fix support for external journals (which was broken in e2fsprogs | |
| 1.41.4). | |
| Fix a regression in debugfs where the "stat" command when no | |
| filesystem was open would cause debugfs to crash with a segmentation | |
| violation. | |
| Starting in the 2.6.29 linux kernel, the ext4 filesystem driver can be | |
| used to support filesystems without a journal. Update the blkid | |
| library so it understands this. | |
| The blkid library will remove an entry from the blkid cache | |
| representing the entire disk if partitions are found, since presuambly | |
| the device previously had no partition table, but has now transitioned | |
| to using a partition table. | |
| Add a check to mke2fs and tune2fs that the argument to the -m option | |
| (which specifies the reserved ratio) must be greater than zero. | |
| (Addresses Debian Bug: #517015) | |
| Add support for tracking the number kilobytes written to the | |
| filesystem via the superblock field s_kbytes_written. It will be | |
| updated by the kernel as well as by e2fsprogs programs which write to | |
| the filesystem. This is useful for tracking the wear to filesystems | |
| on Solid Sstate Drives. | |
| Fix compatibility issue in the libext2fs info file and makeinfo | |
| version 4.12. (Addresses Red Hat Bugzilla: #481620) | |
| Update/clarify man pages. (Addresses Debian Bug: #515693, #365619) | |
| Fixed various Debian packaging issues --- see debian/changelog for | |
| details. (Addresses Debian Bug: #506279) | |
| Programmer's Notes | |
| ------------------ | |
| Fix Hurd compilation problem in e2fsck and tune2fs (Addresses Debian | |
| Bug: #521602) | |
| Fix various gcc compilation warnings and other programming cleanups. | |
| (Addresses Red Hat Bugzilla: #486997) | |
| Add support for building the blkid command statically. | |
| Add support for disabling the built-in blkid library in favor of a | |
| system-installed blkid implementation via the configure option | |
| --disable-libblkid. | |
| E2fsprogs 1.41.4 (January 27, 2009) | |
| =================================== | |
| Fixed a bug which could sometimes cause blkid to return an exit value | |
| of zero for a non-existent device (Addresses Debian Bug: #502541) | |
| Blkid will now recognize ext3 filesystems that have the test_fs flag | |
| set as ext3 filesystems. | |
| The blkid library will now recognize btrfs filesystems and swap | |
| devices currently used by user-level software suspend. | |
| Tune2fs now updates the block group checksums when changing the UUID | |
| to avoid causing e2fsck to complain vociferously at the next reboot. | |
| Tune2fs's inode size resizing algorithms have been fixed so it is not | |
| vastly inefficient for moderate-to-large filesystems, due to some | |
| O(n**2) and O(n*m) algorithms that didn't scale well at all. | |
| Fix tune2fs's inode resizing algorithm so it will not corrupt | |
| filesystems laid out for RAID filesystems; in addition, tune2fs will | |
| refuse to change the inode size for filesystems that have the flex_bg | |
| feature enabled. (This is a limitation in the current implementation | |
| of tune2fs -I.) | |
| E2fsprogs 1.41 broke debugfs's logdump command for normal ext3/4 | |
| filesystems with 32-bit block numbers, when the headers for 64-bit | |
| block numbers was added. This regression has been fixed. | |
| Debugfs's ncheck command has been fixed to avoid printing garbage | |
| characters at the end of file names. | |
| Fix resize2fs for ext4 filesystems. Some blocks that that need moving | |
| when shrinking filesystems with uninit_bg feature would not be moved. | |
| In addition, blocks and inode table blocks were not being correctly | |
| freed when shrinking filesystems with the flex_bg feable, which caused | |
| resize2fs -M to fail. Finally, when blocks are moved, make sure the | |
| uninitialized flag in extents is preserved. | |
| Fix bug which caused dumpe2fs to abort with an error if run on a | |
| filesystem that contained an external journal. | |
| Some distributions used "mke3fs" as an alias for "mkfs.ext3"; check | |
| for this in argv[0] to provide better legacy support for these | |
| distributions. This is a practice that should NOT be continued, | |
| however. | |
| Mke2fs now has a new option -U, which allows the user to specify the | |
| UUID that should be used for the new filesystem. | |
| Mke2fs will treat devices that are exactly 16TB as if they were 16TB | |
| minus one block. This allows users who have read that ext3 supports | |
| up to 16TB filesystems and who create a 16TB LVM to not get confused, | |
| since the true limit is really 16TB minus one block. | |
| E2fsck will no longer abort an fsck run if block group has an errant | |
| INODE_UNINIT flag. | |
| E2fsck now distinguishes between fragmented directories and fragmented | |
| files in verbose mode statistics and in the fragcheck report. | |
| Fix a bug in e2fsck which casued it double count non-contiguous | |
| extent-based inodes. | |
| E2fsck will leave some slack space when repacking directories to allow | |
| room for a few directory entries to be added without causing leaf | |
| nodes to be split right away. | |
| Fix a bug which caused e2fsck to crash when it comes across a | |
| corrupted interior node in an extent tree with the error message: | |
| "Error1: Corrupt extent header on inode XXXXXX" | |
| E2fsck problem descriptions involving the journal are no longer | |
| referred to as "ext3" problems, since ext4 filesystems also have | |
| journals. | |
| Fix a long-standing bug in e2fsck which would cause it to crash when | |
| replying journals for filesystems with block sizes greater than 8k. | |
| Update Catalan translation from the Translation Project. | |
| Fixed various Debian packaging issues --- see debian/changelog for | |
| details. (Addresses Debian Bugs: #503057, #502323, #511207) | |
| Programmer's Notes | |
| ------------------ | |
| Fix build of e2fsck.profiled, and add support for building profiled | |
| binaries in the misc directory if configured with --enable-profile. | |
| The ext2fs_open() function now performs more sanity checks on the | |
| superblock to avoid potential divide by zero errors by other parts of | |
| library. | |
| The ext2fs_read_inode_full() function now has a safety check to avoid | |
| a segmentation fault on corrupted filesystems. | |
| The ext2fs_new_inode() function now has a sanity check so that if the | |
| s_first_inode field in the superblock is insane, it will return | |
| EXT2_ET_INODE_ALLOC_FAIL instead of returning an invalid inode number. | |
| To avoid segmentation faults, ext2fs_block_alloc_stats() and | |
| ext2fs_inode_alloc_stats() now validates the passed inode or block | |
| number to avoid overrunning an array boundary. | |
| Various signed/unsigned errors for variables containing block numbers | |
| have been fixed. | |
| Accomodations for gcc's stupidity in not realizing that constant | |
| strings that do not contain a '%' character are safe to use in format | |
| strings have been made so that distributions that want to compile | |
| e2fsprogs with -Werror=format-security have an easier time doing so. | |
| Added a new 64-bit getsize interface, ext2fs_get_device_size2(). | |
| Added the utility make-sparse.c to the contrib directory. | |
| The ext2fs_block_iterate2() function now reflects errors from | |
| ext2fs_extent_set_bmap() to the caller, if the callback tries to | |
| change a block on an extent-based file, and ext2fs_extent_set_bmap() | |
| fails for some reason (for example, there isn't enough disk space to | |
| split a node and expand the extent tree. | |
| The ext2fs_block_iterate2() function will preserve the uninit flag in | |
| extents when the callback function modifies a block in an extent-based | |
| file. | |
| E2fsck will now flag filesystems that have an insane s_first_ino field | |
| in their superblock, and attempt to use a backup superblock to repair | |
| the filesystem. | |
| E2fsprogs 1.41.3 (October 12, 2008) | |
| =================================== | |
| E2fsck has been fixed so it prints the correct inode number for | |
| uinit_bg related problems. | |
| E2fsck will now offer to clear the test_fs flag if the ext4 filesystem | |
| is available on linux. This can be disabled via a configuration | |
| option in /etc/e2fsck.conf. | |
| Fix a file descriptor leak in libblkid when checking to see if an ext4 | |
| or ext4dev module exists. | |
| Fix a bug in e2fsck where in preen mode, if there are disk I/O errors | |
| while trying to close a filesystem can lead to infinite loops. | |
| (Addresses Red Hat Bugzilla #465679) | |
| Fix a bug in resize2fs where passing in a bogus new size of 0 blocks | |
| will cause resize2fs to drop into an infinite loop. (Addresses Red | |
| Hat Bugzilla: #465984) | |
| Add a check in the Unix I/O functions in libext2fs so that when a | |
| device is opened read/write, return an error if the device is | |
| read-only using the BLKROGET ioctl. | |
| Fix debugfs's ncheck command so that it prints all of the names of | |
| hardlinks in the same directory. | |
| Fix a bug in libblkid so it correctly detects whether the ext4 and | |
| ext4dev filesystems are available, so that the ext4dev->ext4 | |
| fallback code works correctly. | |
| Programmer's Notes | |
| ------------------ | |
| Fix a parallel build problem by making sure util/subst is built before | |
| trying to build the lib/et directory. (Addresses Sourceforge Bug: | |
| #2143281) | |
| Updated "make depend" information for crc16.o | |
| E2fsprogs 1.41.2 (October 2, 2008) | |
| ================================== | |
| Fix e2fsck's automatic blocksize detection. This fixes a regression | |
| from e2fsprogs 1.40.7 which caused e2fsck to fail if the user | |
| specifies a block number using the -b option if the blocksize option | |
| isn't also specified using -B. Unfortunately, users very commonly | |
| invoke e2fsck using "e2fsck -b 32768 /dev/hdXXX" to use the backup | |
| superblock; in fack e2fsck will often suggest this kind of command | |
| line. Oops. | |
| Enhance the debugfs's "ncheck" command so it will print all of the | |
| pathnames for the specified inodes. (Previously, in some cases ncheck | |
| might not print a pathname for an inode at all if some of the other | |
| inodes had multiple hard links.) | |
| Enhance debugfs's "hash" command so the hash seed can be specified via | |
| a command-line option. In addition, allow the hash algorithm to be | |
| specified by name instead of just by number. | |
| Fix e2fsck so that we don't accidentally print the translation file's | |
| header when asking the user a custom question so there is no prompt | |
| defined for a particular problem record. For example, the question | |
| "Run journal anyway" will get the PO header tacked on because e2fsck | |
| erroneously passed the null string to _(). (Addresses Launchpad Bug: | |
| #246892) | |
| Enhance badblocks so that it can test a normal file which is greater | |
| than 2GB. | |
| Enhance the badblocks command so that it displays the time and | |
| percentage complete when in verbose mode. (Addresses Debian Bug: | |
| #429739) | |
| Fix a potential memory leak in a error handling path in debugfs's | |
| ncheck function. | |
| Fix a potential memory corruption problem if a memory allocation fails | |
| in resize2fs. | |
| Fix the usage message for debugfs's logdump command to be consistent | |
| with its man manpage. | |
| Update Polish, French, Vietnamese, Dutch, Indonesian, German, Czech, | |
| and Sweedish translation from the Translation Project. | |
| Add documentation for the file I/O functions to the libext2fs.texinfo | |
| file. (Addresses Debian Bug: #484877) | |
| Update and clarified various man pages. (Addresses Launchpad Bug | |
| #275272; Addresses Debian Bugs: #498100, #498101, #498102, #498103) | |
| Fixed various Debian packaging issues --- see debian/changelog for | |
| details. (Addresses Debian Bug: #497619) | |
| Programmer's Notes | |
| ------------------ | |
| Fix a potential file descriptor leack in libcom_err by setting the | |
| close-on-exec flag for a fd used for debugging. (Addresses Red Hat | |
| Bugzilla #464689) | |
| Fix a potential race in libcom_err by using sem_post/sem_init. SuSE | |
| has been carrying a patch for a long time to prevent a largely | |
| theoretical race condition if a multi-threaded application adds and | |
| removes error tables in multiple threads. Unfortunately SuSE's | |
| approach breaks compatibility by forcing applications to link and | |
| compile with the -pthread option; using pthread mutexes has | |
| historically been problematic. We fix this by using sem_post/sem_init | |
| instead. | |
| Fix e2fsprogs-libs build failure due to 'subs' target. (Addresses | |
| Sourceforge Bug: #2087502) | |
| Avoid linking e2initrd_helper, debugfs, blkid, and fsck with unneeded | |
| libraries when using ELF shared libraries. | |
| Fix ELF shared library when building on systems that don't already | |
| have the e2fsprogs shared libraries already installed. (Addresses | |
| Sourceforge Bug: #2088537) | |
| Fix the pkg-config files so they work correctly when linking with | |
| static libraries and fix the include directory so programs don't have | |
| to use #include <ext2fs/ext2fs.h>, but can use #include <ext2fs.h> | |
| instead. (Addresses Sourceforge Bug: #2089537) | |
| Make sure ext2fs_swab64() is compiled for all platforms, and not just | |
| for x86. (Addresses Debian Bug: #497515) | |
| Remove the unused ext2fs_find_{first,ext}_bit_set() functions for all | |
| non-x86 platforms. (They had been removed for x86 earlier.) | |
| Fix diet libc compilation support, which had bitrotted due to lack of | |
| TLC. Fixing this improves general portability. | |
| When installing the link library when using ELF shared libraries, | |
| avoid using absolute pathnames if the link library and the shared | |
| library are installed in the same directory. (Addresses Sourceforge | |
| Bug: #1782913) | |
| Fix gen-tarball so it will work even if the top-level directory has | |
| been renamed to something other than "e2fsprogs". Also make | |
| gen-tarball print the size of the resulting tar.gz file. | |
| E2fsprogs 1.41.1 (September 1, 2008) | |
| ==================================== | |
| Many people are forgetting to update their mke2fs.conf file, and this | |
| causes ext3, ext4, and ext4dev filesystems won't get created with the | |
| proper features enabled. We address this in two ways. First, mke2fs | |
| will issue a warning if there is not definition for an ext3, ext4, or | |
| ext4dev filesystem and the user is trying to create such a filesystem | |
| type. Secondly, when installing from a source build, "make install" | |
| will provide basic configuration file handling for /etc/mke2fs.conf. | |
| If it exists, and does not mention ext4dev, it will be moved aside to | |
| /etc/mke2fs.conf.e2fpsrogs-old and the new /etc/mke2fs.conf file will | |
| be installed. If the existing /etc/mke2fs.conf file does mention | |
| ext4dev, then "make install" will install official mke2fs.conf file as | |
| /etc/mke2fs.conf.e2fsprogs-new and issue a message to the user that | |
| they should look to see if any changes need to be merged. | |
| The mke2fs program will now create the journal in the middle of the | |
| filesystem, since this minimizes seek times on average for fsync-heavy | |
| workloads. In addition, mke2fs will now create journals using extents | |
| for filesystems that support them. This results in a more efficient | |
| encoding for the journal since it eliminates the need for using | |
| indirect blocks. | |
| The mke2fs program will avoid allocating an extra block to the | |
| journal. (Addresses Sourceforge Bug: #1483791) | |
| Mke2fs will correctly enforce the prohibition against features | |
| (specifically read-only features) in revision 0 filesystems. (Thanks | |
| to Benno Schulenberg for noticing this problem.) | |
| Mke2fs previously would occasionaly create some slightly non-optimally | |
| placed inode tables; this bug has been fixed. | |
| The mke2fs and tune2fs programs now print the correct usage message | |
| describing the maximum journal size. (Addresses Debian Bug: #491620) | |
| Add support for setting the default hash algorithm used in b-tree | |
| directories in tune2fs (from a command-line option) or mke2fs (via | |
| mke2fs.conf). In addition, change the default hash algorithm to | |
| half_md4, since it is faster and better. | |
| The blkid library will now recognize MacOS hfsx filesystems, and | |
| correctly extract the label and uuid for hfs, hfsx, and hfsplus | |
| filesystems. (Addresses Sourceforge Feature Requests: #2060292) | |
| The blkid library has improved detection of JFS and HPFS filesystems. | |
| (Addresses Launchpad Bug: #255255) | |
| The blkid library is now much more efficiently handling devicemapper | |
| devices, mainly by no longer using the devicemapper library. This can | |
| speed up access for systems with a large number of device mapper | |
| devices. | |
| Blkid had a number of cache validation bugs in libblkid that have been | |
| fixed. (Addresses Debian Bug: #493216) | |
| Resize2fs will now properly close out the "updating inode references" | |
| progress bar so there is a newline printed before printing the final | |
| "resize is successful" message. | |
| Resize2fs will now correctly handle filesystems with extents and/o | |
| uninitialized block groups correctly when file/directory blocks need | |
| to relocated (i.e., when shrinking a filesystem or if the resize_inode | |
| is not present). To support this, the ext2fs library now supports | |
| initializing inode and block bitmaps that are not yet initialized when | |
| allocating them using ext2fs_new_block() and ext2fs_new_inode(). In | |
| addition, e2fs_block_iterate2() can now support changing the location | |
| of interior nodes of an extent tree, and ext2fs_extent_set_bmap() has | |
| been optimized to avoid creating unnecessary new extents when updating | |
| the location of blocks in the extent tree. This will also help out | |
| e2fsck's recovery of obscurely corrupted filesystems with extents, | |
| when blocks are claimed by multiple inodes. | |
| Add support for on-line resizing ext4 filesystem with the flex_bg | |
| filesystem feature. The method for doing so is not optimal, but to do | |
| a better job will require kernel support. | |
| E2fsprogs 1.41.0 intrduced a bug in libext2fs which casued e2image and | |
| debugfs programs to not be able to read e2image files; the signed | |
| vs. unsigned bug in the code which read bitmaps from the e2image has | |
| been fixed. (Addresses Debian Bug: #495830) | |
| Resize2fs is now correctly managing the directory in-use counts when | |
| shrinking filesystems and directory inodes needed to be moved from one | |
| block group to another. This bug has been around since e2fsprogs | |
| 1.26, and is largely harmless, but does cause a filesystem corruption | |
| which will be flagged by e2fsck after the filesystem has been shrunk. | |
| E2fsck will no longer issue spurious complaints about the inode size | |
| caused by very large extent-based files, and by blocks reallocated | |
| using fallocate() with the FALLOC_FL_KEEP_SIZE option. (Addresses | |
| Kernel Bugzilla: #11341) | |
| Mke2fs will now set the creation timestamp on the lost+found directory | |
| and the root directory. (More generally, all new inodes created using | |
| the ext2fs library will correctly set the creation timestamp.) | |
| E2fsck now correctly calculates ind/dind/tind statistics in the | |
| presence of extent-based files. In addition, "e2fsck -v" will report | |
| statistics of the depth of extent trees in the filesystem. E2fsck can | |
| also give an inode fragmentation report using "e2fsck -E fragcheck" | |
| which can be useful when debugging the kernel block allocation | |
| routines. | |
| Fix support for empty directory blocks in ext4 filesystems with 64k | |
| blocksize filesystems. | |
| E2fsck will now print the depth of corrupt htree directories. | |
| Debugfs's htree command now correctly understands extent-based | |
| directories. It will also print out the minor hash as well as the | |
| major hash. | |
| Debugfs has a new command which will print the supported features of | |
| e2fsprogs, to enable scripts to know whether the installed version of | |
| e2fsprogs can support a specific feature. | |
| Debugfs will now write files using extents for filesystems that | |
| support them. | |
| The error message printed by "tune2fs -I" if the inode size was too | |
| small was rather confusing, so it has been improved. Also, we won't | |
| try to create an undo log until we know that command-line-specified | |
| parameters such as "tune2fs -I <inode size>" are valid. | |
| Given some filesystems found "in the wild" that had non-zero block | |
| group checksums even though the uninit_bg/gdt_sum feature was not | |
| enabled, e2fsck would issue spurious error messages. Teach | |
| ext2fs_group_desc_csum_verify() to ignore the block group checksum | |
| entirely if the feature flag is not set. (Addresses Debian Bug: | |
| #490637) | |
| The blkid program will now print out a user-friendly listing of all of | |
| the block devices in the system and what they contain when given the | |
| -L option. (Addresses Debian Bug: #490527) | |
| The filefrag program now has a more accurate calculation for the | |
| number of ideal extents. (Addresses Debian Bug: #458306) | |
| The test I/O manager is now enabled by default, but its overhead is | |
| only incurred when it would be enabled via the TEST_IO_FLAGS or | |
| TEST_IO_BLOCK environment variables. | |
| Typographical errors in various program strings and usage messages | |
| have been fixed; most of these were pointed out by the e2fsprogs | |
| message catalog translators. (Thanks, translators!) | |
| Update and clarified various man pages, as well as some typographical | |
| errors in the libext2fs texinfo file. | |
| Fixed various Debian packaging issues --- see debian/changelog for | |
| details. | |
| Add Indonesian and update French, Polish, Dutch, German, Sweedish, | |
| Czech, and Vietnamese Translations. (Addresses Debian Bugs: #313697, | |
| #401092) | |
| Programmer's Notes | |
| ------------------ | |
| Fix portability problem with the badblocks group; for systems that | |
| don't have nanosleep(), try using usleep() instead. | |
| The "make check" target in the e2fsck directory now sets | |
| LD_LIBRARY_PATH before running the various e2fsck internal library | |
| regression tests. | |
| The crc32 regression test in the e2fsck library is now portable to | |
| greater varienty of environments, including big-endian systems and | |
| when cross-building e2fsprogs for embedded systems. (Addresses | |
| Sourceforge Bug: #2019287) | |
| The ext2fs_extent_set_bmap() had some bugs when setting the first | |
| block in a file, or when replacing a single block extent. Those cases | |
| fortunately were came up relatively rarely when e2fsck was checking | |
| files, but caused some problems when resize2fs was shrinking | |
| extent-based files. | |
| Fix a potential core-dumping bug in libe2p's iterate_on_dir() | |
| function. | |
| Various ext2fs library functions --- ext2fs_block_iterate2(), | |
| ext2fs_initialize() and ext2fs_extent_open() --- now correctly free | |
| allocated memory to avoid memory leaks in all of their error return | |
| paths. | |
| Ext2ed was failing to build because masix support had been removed in | |
| the rest of e2fsprogs, so ext2ed no longer has masix support, either. | |
| The configure script now respects the LDFLAGS environment variable if | |
| it is set when configure is called. (Addresses Sourceforge Feature | |
| Request: #1937287) | |
| Libuuid is now more portable to the Windows platform. (Addresses | |
| Sourceforge Feature Request: #1937287) | |
| The configure script now uses AC_MSG_{RESULT,WARN,ERROR} instead of | |
| bare echo commands so that configure flags such as --quiet work | |
| correctly. (Addresses Sourceforge Patches: #2058794) | |
| A few uses of sprintf have been removed from the ext2fs library to | |
| make life easier for bootloaders with a limited libc environment. | |
| (Addresses Sourceforge Bug: #2049120) | |
| The ext2fs_read_inode() checks the validity of the inode number passed | |
| to it earlier, to avoid doing some needless work when it would fail | |
| anyway. | |
| The ext2fs_open() checks the validity of the blocksize parameter | |
| passed to it earlier, to avoid doing some needless work when it would | |
| fail anyway. | |
| Disable a very annoying automatic "%.sh -> %" GNU make rule in the | |
| top-level Makefile. That automatic rule is used to better support | |
| SCCS, but it caused problems for a particular niche distribution which | |
| likes to use configure.sh files to store the configure options used to | |
| build a package. Unfortuntaely GNU make will use the configure.sh to | |
| replace the configure script, resulting in a self-inflicted fork bomb | |
| leading to an out-of-memory crash. | |
| To support old GNU C compilers don't use C99/C++ comments, but only | |
| K&R style comments, and don't try to use __builtin_expect if __GNUC__ | |
| is less than 3. (__builtin_expect is only supported for gcc versions | |
| 2.96 and up, and it's tricky to check for gcc 2.95 vs gcc 2.96; since | |
| this is an optimization, we only try to use __builtin_expect for gcc 3 | |
| and up.) | |
| In e2fsck's crc routines, make sure we use WORDS_BIGENDIAN instead of | |
| __LITTLE_ENDIAN, which are only defined by glibc's header files and | |
| hence isn't portable. | |
| For the convenience for some distributions that need a static tune2fs, | |
| the Makefile for misc/ now has a tune2fs.static target. | |
| The ext2fs_block_iterate2() function now supports BLOCK_FLAG_APPEND | |
| for extent-based files | |
| The ext2fs_bmap() function now supports BMAP_ALLOC for extent-based | |
| files. | |
| All source files no longer have any trailing white space. | |
| The io_channel_read_blk64() and io_channel_write_blk64() functions are | |
| now functions instead of C preprocessor macros to provide better | |
| forward compatibility. | |
| The e2fpsrogs translation template now expands the @x abbrevation. | |
| Various namespace leackages in libblkid, libe2p, and libext2fs have | |
| been fixed. | |
| Fix a parallel build problem in e2fsprogs. | |
| E2fsprogs is now more portable to Solaris. | |
| * blkid no longer assumes that the TIOCGSIZE and TIOCGWINSZ ioctl's | |
| are always present. | |
| * Scripts do not assume that /bin/true is always in /bin | |
| * Don't use __FUNCTION__ since Solaris's C99 doesn't support it. | |
| * Flush stdio handles before calling setbuf(), since Solaris will | |
| discard any pending output to the stream. | |
| * Define _XOPEN_SOURCE to 600 since Solaris's header files are very | |
| picky about which C compiler can beused for SUSv3 conformance. | |
| Use of C99 is not compatible with SUSv2 (_XOPEN_SOURCE=500), | |
| and C89 is not compatible with SUSv3 (_XOPEN_SOURCE=600). | |
| Since we need some SUSv3 functions, consistently use SUSv3 so | |
| that e2fsprogs will build on Solaris using c99. | |
| * Solaris C99 does not support varargs C preprocessor macros | |
| * Solaris header files pollute the C namespace if in/netinet.h | |
| is included, which conflicts with e2fsprogs' use of the kmem_cache_t | |
| typedef. | |
| * Solaris ships with a pathetically ancient shell in /bin/sh so we | |
| avoid the use of various more avanced shell constructs such as $(). | |
| The "make rpm" command will now take some extra configure optiosn from | |
| the build environment without needing to patch the source tree. | |
| The ext2fs_add_dir_block() function will now grow the dblist more | |
| aggressively as an optimization to avoid copying the array too often. | |
| The e2fsck_write_bitmaps() will write the block and inode bitmaps | |
| together instead of in two passes. | |
| E2fsprogs 1.41 (July 10, 2008) | |
| ============================== | |
| Add support for ext4 filesystem features, in particular extents, | |
| uninit_bg, flex_bg, huge_file, and dir_nlink features. Also add | |
| support for checking journal checksums. Debugfs will print new | |
| superblock and inode fields that were defined for ext4. For example, | |
| the nanosecond and i_version fields of an inode, and the | |
| s_min_extra_isize and s_wanted_extra_isize fields from the superblock. | |
| Note: Resize2fs doesn't currently support the combination of flex_bg | |
| and !resize_inode. (Addresses Debian Bug: #388452, #425477) | |
| Tune2fs can support migrating a filesystem from using 128 byte inodes | |
| to 256 byte inodes, so it can take advantage of the full features of | |
| ext4. | |
| Add support for "undo" support. E2fsck and mke2fs can optionally | |
| record an undo log which can replayed by the program e2undo. | |
| E2fsck could damage a filesystem by trying to relocate inode tables | |
| due to corrupted block group descriptors, where the attempted inode | |
| table relocation would do far more harm than good. E2fsck has been | |
| fixed to detect this these sorts of corrupted block group descriptors | |
| much earlier in e2fsck processing, so it can try to use the backup | |
| superblock and block group descriptors first. This should be a much | |
| better strategy for recovering these types of corrupted filesystems. | |
| (Addresses Sourceforge Bug: #1840291) | |
| E2fsck will display a more understandable message when the last check | |
| field in the superblock is in the future. (Addresses Debian Bug: | |
| #446005). | |
| E2fsck now performs more extensive and careful checks of extended | |
| attributes stored in the inode. | |
| Enhance mke2fs to print a more explanatory error message when | |
| ext2fs_get_device_size() returns EFBIG. (Addresses Debian Bug: | |
| #488663) | |
| Fix mke2fs to use a default block size of 4k when formatting an | |
| external journal device. This is done by using a fixed filesystem | |
| type list that consists only of the single filesystem type "journal" | |
| when looking up configuration keys in /etc/mke2fs.conf. (Addresses | |
| Debian Bug: #488663) | |
| Speed up how mke2fs writes the journal data blocks by writing the disk | |
| blocks in larger chunks. | |
| Fix blkid handling of stale devices. Fix a bug which could cause a | |
| core dump while garbage collecting the blkid cache, and assure that | |
| blkid_find_dev_with_tag() never returns a non-existent device. Also, | |
| if a filesystem is found at a new /dev location, eliminate any | |
| duplicate stale entries which can not be verified. | |
| (Addresses Debian Bugs: #487758, #487783) | |
| Add more paranoid checks for LVM volumes and swap partitions in | |
| blkid's probe function, to reduce the chances of false positives. | |
| The mke2fs program now has a much more sophisticated system for | |
| controlling configuration parameters of a newly created filesystem | |
| based on a split filesystem and usage type system. The -t option to | |
| mke2fs was a deprecated alias to -c; it now specifies a filesystem | |
| type (ext2, ext3, ext4, etc.), while the -T option can now be a comma | |
| separated usage list. The filesystem type information and type | |
| information is used to extract configuration parameters from the | |
| /etc/mke2fs.conf file. | |
| The mke2fs program will no longer complain and request the -f option | |
| when the user tries to create a filesystem with greater than 2**31 | |
| blocks. | |
| When creating a filesystem for the GNU Hurd use a fs-type of Hurd and | |
| adjust the mke2fs.conf file so filesystems for the Hurd are created | |
| with a blocksize of 4096 and inode size of 128, which is all it knows | |
| how to handle. (Addresses Debian Bug: #471977) | |
| Mke2fs will always make sure that lost+found always has at least 2 | |
| blocks, even for filesystems with very large blocksizes (i.e., 64kb). | |
| Resize2fs will now print the minimum needed filesystem size if given | |
| the -P option, and will resize the filesystem to the smallest possible | |
| size if given the -M option. | |
| Fix resize2fs to clean up the resize_inode if all of the reserved gdt | |
| blocks are consumed during an off-line resize. | |
| The "ls" command in debugfs now supports the -p option, which causes | |
| it to quote the filenames so that spaces or tabs in directory entries | |
| are easily visible. (Addresses Red Hat Bugzilla: #149480; Addresses | |
| Sourceforge Feature Request: #1201667) | |
| Fix a potential off-by-one buffer oveflow in the fs_device_name in an | |
| e2image file. | |
| The chattr program will return a non-zero exit code in case of | |
| failures, and error messages can be suppressed with the -f option. | |
| (Addresses Red Hat Bugzilla: #180596) | |
| Fix a bug in badblocks which caused it to overrun an array and likely | |
| crash if more than 8 test patterns are specified using the -t option. | |
| (Addresses Debian Bug: #487298) | |
| Add support to badblocks to limit how quickly it reads from the disk | |
| drive (so it can be used for background scrubbing), and so it will | |
| abort after finding a given number of errors. | |
| Remove support for the legacy big-endian filesystem format which only | |
| existed on extremely long-dead PowerPC kernels almost a decade ago. | |
| Remove MASIX support from e2fsprogs. | |
| Add I/O statistics reporting to e2fsck. | |
| Update Vietnamese, Polish, French, Spanish, German, Catalan, Dutch, | |
| Czech translations. | |
| Fixed various Debian packaging issues --- see debian/changelog for | |
| details. (Addresses Debian Bugs: #487443, #487675, #490003) | |
| Fixed spelling mistakes, typos, and otherwise clarified man pages. | |
| (Addresses Debian Bugs: #393313, #487849, #440983, #440981) | |
| Programmer's Notes | |
| ------------------ | |
| Factor out bitmap code in preparation for adding 64-bit new-style | |
| bitmaps. | |
| Fix gcc -Wall warnings | |
| Fix the pkg-config files so that private librares are specified in | |
| "Libs.private:". | |
| Fix the libext2fs.texinfo manual so it builds with modern versions of | |
| texinfo. | |
| Silence the makefile from showing the awk command used to build the | |
| Clean up the badblocks group so to make it more portable and robust. | |
| Avoid using predictable filenames in /tmp in blkid's regression test | |
| suite. Also remove bashism's in the regression test script. | |
| If the configure script is given --with-diet-libc, don't use thread | |
| local storage, since diet libc doesn't support TLS. (Addresses | |
| Sourceforge Bug: #2000654) | |
| Fix the blkid regression test suite to tolerate older versions of | |
| mkswap that don't support the -U option. | |
| A few library routines have been converted to support 64-bit block | |
| numbers; in particular, the I/O manager functions, the test_io, | |
| inode_io, and unix_io managers have all be converted to support 64-bit | |
| operation. | |
| Debugfs can now be extended for use by test programs. See | |
| lib/ext2fs/extents.c for an example for how it can be used. The test | |
| program links against the debugfs object files, and provides | |
| additional commands by defining an auxiliary libss command table. | |
| The lazy_bg filesystem feature, which was only used by developer's | |
| testing, has been removed since it has been largely supplanted by | |
| uninit_bg. This also simplifies the code. | |
| E2fsprogs 1.40.11 (June 17, 2008) | |
| ================================= | |
| Mke2fs, tune2fs, and resize2fs now use floating point to calculate the | |
| percentage of reserved blocks. (Addresses Debian Bug: #452639) | |
| Updated Spanish and Catalan translations. | |
| Fixed various Debian packaging issues --- see debian/changelog for | |
| details. (Addresses Debian Bugs: #483962, #483023) | |
| Add detection for ZFS volumes to the libblkid library. | |
| Fixed spelling mistakes, typos, and otherwise clarified man pages. | |
| (Addresses Debian Bug: #486463) | |
| Programmer's notes: | |
| ------------------- | |
| Fix marginal C code in probe_lvm2() function to the blkid library more | |
| portable for older compilers. | |
| Fix build problems on MacOS X. (Addresses Sourceforge Bug: #1972473) | |
| Fix ext2fs_swap{16,32,64} functions so they can be used by external | |
| applications on big-endian machines. (Addresses Debian Bug: #484879) | |
| E2fsprogs 1.40.10 (May 21, 2008) | |
| ================================ | |
| When deciding whether or not to revalidate a blkid cache entry, if the | |
| device's mtime is newer than the last time the cached entry was | |
| validated, force a revalidation. | |
| Fix a potential data corruption bug in e2fsck in the journal replay. | |
| The chances of this is happening is extremely remote, especially the | |
| default data=ordered or data=writeback modes. However, if a block | |
| which has been journalled starts with the first four bytes 0xc03b3998, | |
| when e2fsck replays the journal, those four bytes will be replaced | |
| with zero's. Fortunately, it is highly, highly unlikely for e2fsck | |
| metadata to begin with those fatal 4 byte sequence, and unless | |
| data=ordered mode is in use, data blocks are never journaled. | |
| Updated German, Dutch, Sweedish, and Vietnamese translations. | |
| Programmer's notes: | |
| ------------------- | |
| Fixed various Debian packaging issues --- see debian/changelog for | |
| details. | |
| Remove default sizes of types when cross compiling, since autoconf | |
| 2.50 can figure this out automatically now. | |
| E2fsprogs 1.40.9 (April 27, 2008) | |
| ================================= | |
| SuSE's security team audited uuidd and came up with a few minor | |
| issues. None of them are serious given that uuidd runs setuid as a | |
| unprivileged user which has no special access other than libuuid | |
| directory, but it's good to get them fixed. | |
| One additional fix in ext2fs_swap_inode_full() needed for resize2fs to | |
| work correctly with in-inode extended attributes. | |
| Updated German, Czech, Dutch, French, Polish, Sweedish, and Vietnamese | |
| translations. | |
| Debugfs will avoid using a pager if the standard output is not a tty. | |
| Fix debugfs and tune2fs to correctly handle daylight savings time when | |
| parsing a time string. | |
| Fixed spelling mistakes, typos, and otherwise clarified man pages. | |
| Fix fsck completion bars when multiple filesystems were being checked | |
| in parallel. (Addresses Debian Bug: #432865, Addresses Launchpad Bug: | |
| #203323, Addresses Sourceforge Bug: #1926023) | |
| Fix fsck so that progress information is sent back correctly when | |
| multiple filesystems are being check and the output of fsck is being | |
| redirected to a file descriptor. Also, include the device name (w/o | |
| spaces) in the progress information sent back via a file descriptor. | |
| (Addresses Launchpad Bug: #203323, Addresses Sourceforge Bug: | |
| #1926023) | |
| Teach fsck to treat "ext4" and "ext4dev" as ext* filesystems. | |
| If logsave receives a SIGTERM or SIGINT signal, it will now pass that | |
| signal to its child process. | |
| Fix mke2fs's creation of are resize inode when there is a non-standard | |
| s_first_data_block setting. | |
| Fix bug in blkid when run by an unprivileged user; most devices were | |
| not reported correctly. 9Addresses Launchpad Bug: #220275) | |
| Mke2fs will not allow the logically incorect combination of | |
| resize_inode and meta_bg, which had previously caused mke2fs to create | |
| a corrupt fileystem. | |
| Fix fsck in German locales so that a 'j' means yes. | |
| (Addresses Sourceforge Bug: #1947683) | |
| Programmer's notes: | |
| ------------------- | |
| Fixed various Debian packaging issues --- see debian/changelog for | |
| details. | |
| Update valgrind options in test_script to work with valgrind 3.2.3 | |
| Update texinfo.tex to a much newer version from the FSF. | |
| Remove bashism for configure script and from the lib/ss Makefile. | |
| Addresses Sourceforge Bug: 1921969 | |
| Fix some silently broken tests: m_no_opt, m_meta_bg, and m_raid_opt. | |
| Fix build system so that if texinfo is not installed, it won't print a | |
| (harmless) error message. | |
| E2fsprogs 1.40.8 (March 13, 2008) | |
| ================================= | |
| Fixed e2image -I so it works on image files which are larger than 2GB. | |
| Fixed e2fsck's handling of directory inodes with a corrupt size field. If | |
| the size is larger than the number of blocks found in the inode, don't | |
| try to allocate extra empty blocks at the end of the directory to make | |
| up the difference; there's no point to doing that. In addition, if | |
| the size is not a multiple of a blocksize, always fix it. | |
| E2fsck handled a pass 2 "should never happen error" by not giving | |
| enough information and then core dumping. Unfortunately, it was all | |
| too easy to trigger the "should never happen" situation if a | |
| directory's inode size was not correct. This has been fixed, but | |
| e2fsck has also been taught how to handle this situation more | |
| gracefully, by simply removing the inode hash tree information, so | |
| that it can be rebuilt again after e2fsck's pass 3. (Addresses | |
| Launchpad Bug: #129395) | |
| Resize2fs had a bug resizing large inodes with extended attributes | |
| that was fixed in 1.40.6; unfortunately, it turned out it wasn't fixed | |
| completely on big-endian systems such as PowerPC. The bug should be | |
| completely fixed now. Yay for regression test suites. (Addresses Red | |
| Hat Bugzilla: #434893) | |
| Updated German, Czech, Dutch, Polish, Sweedish, and Vietnamese | |
| translations. Many thanks to Philipp Thomas from Novell for stepping | |
| up to become the new German translation maintainer! (Addresses Debian | |
| Bugs: #302512, #370247, #401092, #412882). | |
| When e2fsck is clearing a corrupt inode's HTREE directory information, | |
| make it clear that it is just clearing the HTREE information, not the | |
| entire inode. | |
| Fixed spelling mistakes, typos, and otherwise clarified man pages. | |
| Programmer's notes | |
| ------------------ | |
| Add new functions, ext2fs_dblist_get_last() and | |
| ext2fs_dblist_drop_last(), which allows the caller to examine the last | |
| directory block entry added to the list, and to drop if it necessary. | |
| Fixed a portability problem in libblkid with DJGPP. | |
| Fix an obvious typo in an "internal error" message in e2fsck. Thanks | |
| to Philipp Thomas for pointing this out. | |
| If the info files are not built, change "make install" so it doesn't | |
| fail with an error code. | |
| E2fsprogs 1.40.7 (February 28, 2008) | |
| ==================================== | |
| Remove support for clearing the SPARSE_SUPER feature from tune2fs, and | |
| depreciate the -s option, since it can result in filesystems which | |
| e2fsck can't fix easily. There are very good reasons for wanting to | |
| disable sparse_super; users who wants to turn off sparse_super can use | |
| debugfs. (Addresses Sourceforge Bug: #1840286) | |
| Add missing options to mke2fs's usage message. (Addresses Sourceforge | |
| Bug: #1751393) | |
| Fix bug in resize2fs when large (greater than 128 byte) inodes are | |
| moved when a filesystem is shrunk; it was only moving the first 128 | |
| bytes, so extended attributes were not getting moved. (Addresses Red | |
| Hat Bugzilla: #434893) | |
| E2fsck now prints an explicit message when the bad block inode is | |
| updated, to avoid confusion about why the filesystem was modified. | |
| (Addresses Sourceforge Bug: #756460) | |
| Allow mke2fs and tune2fs manipulate the large_file feature. | |
| Previously we just let the kernel and e2fsck do this automatically, | |
| but e2fsck will no longer automatically clear the large_file feature. | |
| It still isn't really necessary to worry about this feature flag | |
| explicitly, but some users seem to care. (Addresses Red Hat Bugzilla: | |
| #258381) | |
| Suppress message about an old-style fstab if the fstab file is empty. | |
| (Addresses Debian Bug: #468176) | |
| Fix (really minor) bug in debugfs's find_free_block so it avoids | |
| reporting a free block more than once if there are too few free blocks | |
| in the filesystem. (Addresses Sourceforge Bug: #1096315) | |
| Change e2fsck to no longer clear the LARGE_FILES feature flag | |
| automatically, when there are no more > 2GB files in the filesystem. | |
| It's been almost a decade since there have been kernels that don't | |
| support this flag, and e2fsck clears it quietly without telling the | |
| user why the filesystem has been changed. | |
| Fix bug which could cause libblkid to seg fault if a device mapper | |
| volume disappears while it is being probed. (Addresses RedHat | |
| Bugzilla: #433857) | |
| Inhance e2fsck's reporting of unsupported filesystem feature flags. | |
| (Addresses Sourceforge Feature Request: #1175808) | |
| Fix option syntax in dumpe2fs for explicit superblock and blocksize | |
| parameters. What was currently documented in the man page has been | |
| broken for some time, due to getopt() implementation changes. The | |
| option sytax has been changed to one which is can be more portable | |
| supported and which is consistent with the format for extended options | |
| in mke2fs and tune2fs. (Addresses Sourceforge Bug: #1830994) | |
| Add support to tune2fs to clear the resize_inode feature. This | |
| requires an fsck afterwards. (Addresses Red Hat Bugzilla: #167816) | |
| Teach blkid to detect LVM2 physical volumes. (Addresses Red Hat | |
| Bugzilla: #409321) | |
| Add support for setting RAID stride and stripe-width via mke2fs and | |
| tune2fs. Teach dumpe2fs to print the RAID parameters. | |
| Add support for setting new superblock fields to debugfs's | |
| set_super_value. | |
| Add support for printing "mostly-printable" extended attributes in | |
| Debugfs. | |
| Add support for the -M option to fsck, which causes it to ignore | |
| mounted filesystem. | |
| Fix uuidd so that it creates the pid file with the correct pid number. | |
| (Addresses Sourceforge Bug: #1893244) | |
| Fix various gcc -Wall warnings. | |
| Update Czech, Dutch, Polish, Sweedish, and Vietnamese translations | |
| Fixed spelling mistakes, typos, and otherwise clarified man pages. | |
| (Addresses Sourceforge Patch: #1399325) | |
| Programmer's notes: | |
| ------------------- | |
| Fixed various Debian packaging issues --- see debian/changelog for | |
| details. (Addresses Debian Bug: #466929) | |
| Add new flag EXT2_FLAG_NONFREE_ON_ERROR ext2fs_open2() which returns a | |
| partially filled-in filesystem object on an error, so that e2fsck can | |
| print more intelligent error messages. | |
| Add a new function e2p_edit_feature2() which allows the caller to | |
| specify which feature flags are OK to set or clear, and which returns | |
| more specific information about feature flags which are not allowed to | |
| be set/cleared. | |
| Set the C locale in the test_script driver since it uses [A-Za-z]. | |
| (Addresses Sourceforge Bug: #1890526) | |
| Use fcntl locking instead of lockf in libuuid since Cygwin doesn't | |
| support lockf(). | |
| Change configure.in to avoid using the 'dc' command unless it is | |
| absolutely needed. (i.e., when using parsing a WIP-style version | |
| number) (Addresses Sourceforge Bug: #1893024) | |
| Add portability checks to support compilation under DJGPP. | |
| Update to the latest samba tdb code before the LGPLv3 change, which | |
| fixes a realloc() leak on failure. | |
| Fix memory leak in ext2fs_alloc_block(). | |
| Fix makefile dependency issues for various install targets. | |
| (Addresses-Sourceforge-Patches: #1903484, #1903466, #1903456) | |
| Improve descriptions for the r_move_itable and r_resize_inode tests. | |
| E2fsprogs 1.40.6 (February 9, 2008) | |
| =================================== | |
| Add support for returning labels for UDF filesystems in the blkid | |
| library. | |
| Fix bug in the blkid library where cached filesystems was not being | |
| flushed when opening USB devices returned the error ENOMEDIUM. | |
| (Addresses Debian Bug: #463787) | |
| Added logic to the blkid library to automatically choose whether a | |
| filesystem should be mounted as ext4 or ext4dev, as appropriate. | |
| Allow tune2fs to set and clear the test_fs flag on ext4 filesystems. | |
| Fix a bug in e2fsck which caused it to core dump if e2fsprogs had been | |
| configured with --enable-jbd-debug. | |
| Document the BLKID_FILE environment variable in the libblkid man page | |
| Programmer's Notes: | |
| ------------------- | |
| Update e2fsprogs translation template and Vietnamese and Czech translations | |
| Fixed various Debian packaging issues --- see debian/changelog for | |
| details. (Addresses Debian Bugs: #436058) | |
| Don't try to create $DESTDIR/etc/init.d as part of make install as we | |
| don't install the init.d script (and it's not the recommended way to | |
| start uuidd anyway). (Addresses Sourceforge Bug: #1885085) | |
| Use thread local storage to fix a theoretical race condition if two | |
| threads try to format an unknown error code at the same time in the | |
| com_err library. | |
| E2fsprogs 1.40.5 (January 27, 2008) | |
| =================================== | |
| Fix a potential overflow big in e2image if the device name is too | |
| long. | |
| Mke2fs will now create new filesystems with 256 byte inodes and the | |
| ext_attr feature flag by default. This allows for much better future | |
| compatibity with ext4 and speeds up extended attributes even on ext3 | |
| filesystems. | |
| Teach e2fsck to ignore certain "safe" filesystem features which are | |
| set automatically by the kernel. Having the kernel set features | |
| automagically behind the user's back is a bad idea, and we should try | |
| to break the kernel of this habit, especially for the newer ext4 | |
| feature flags. But for now, we will try to avoid needless full checks | |
| which can annoy users who are doing fresh installs. | |
| Add support in tune2fs and mke2fs for making a filesystem as being "ok | |
| to be used with test kernel code". This will be needed for using test | |
| filesystems with the latest ext4 kernel code. | |
| Change e2fsck -fD so that it sorts non-htree directories by inode | |
| numbers instead of by name, since that optimizes performances much | |
| more significantly. (Addresses-Sourceforge-Feature-Request: #532439) | |
| If e2image fills the disk, fix it so it exits right away instead of | |
| spewing large numbers of error messages. | |
| (Addresses-Sourceforge-Feature-Request: #606508) | |
| If ftruncate64() is not available for resize2fs, let it use ftrucate() | |
| instead, but have it check to see if the size would get truncated, and | |
| skip calling ftruncate in that case. | |
| Add support for detecting HFS+ filesystems in the blkid library. | |
| Add supprt in the blkid library for ext4/ext4dev filesystems. | |
| Fix a bug in blkid where it could die on a floating point exception | |
| when presented with a corrupt reiserfs image. | |
| Fix blkid's handling of ntfs UUID's so that leading zeros are printed | |
| such that UUID string is a fixed length. | |
| Add sample python bindings for the uuid library to the contrib | |
| directory. (Addresses-Sourceforge-Patches: #778817) | |
| Fix debugfs's 'lsdel' command so it uses ext2fs_block_iterate2 so it | |
| will work with large files. (Addresses Sourceforge Feature Request: | |
| #1257500 and Sourceforge Support Request: #1253511) | |
| Allow the debugfs 'undel' command to undelete an inode without linking | |
| it to a specific destination directory, since this might require | |
| allocating blocks that could overwrite some yet-to-be-recovered | |
| deleted files. (Addresses-Sourceforge-Feature-Request: #967141) | |
| Update Swedish translations from the Translation Project. | |
| Programmer's Notes: | |
| ------------------- | |
| Fix configure handling of --sbindir (which should rarely be used, but | |
| someone did complain, so let's fix it). (Addresses Sourceforge Bug: | |
| #498381) | |
| Updated e2fsprogs.spec file to include a new uuidd package | |
| Use pkg-config to determine where to find the devmapper library so we | |
| can find out where it is located on different distributions. | |
| Fix Makefile race so that "make -j3 distclean" works correctly | |
| Fix portability problems on non-Linux/non-Hurd/non-Masix systems, | |
| especially on MacOS X systems. (Addresses Sourceforge Bugs: #1861633, | |
| #1819034, #1863819) | |
| Fixed spelling mistakes, typos, and otherwise clarified man pages. | |
| Fixed various Debian packaging issues --- see debian/changelog for | |
| details. (Addresses Debian Bugs: #459403, #459475, #459614) | |
| Remove the --enable-dynamic-static configure option, and build e2fsck | |
| dynamically by default. If the user wants e2fsck.static, he/she will | |
| need to build it via "make -C e2fsck e2fsck.static" | |
| Fix various build warnings due to missing prototypes. | |
| (Addresses Sourceforge Patch: #1861663, #1861659) | |
| E2fsprogs 1.40.4 (December 31, 2007) | |
| ==================================== | |
| Improve time-based UUID generation. A new daemon uuidd, is started | |
| automatically by libuuid if necessary. This daemon is setuid to allow | |
| updates to /var/lib/libuuid, so the clock sequence number can be | |
| stored and so if the clock is set backwards, it can be detected. | |
| (Addresses Sourceforge Bug: #1529672, Addresses Red Hat Bugzilla: | |
| #233471) | |
| Filter out the NEEDS_RECOVERY feature flag when writing out the backup | |
| superblocks. This avoids e2fsck from concluding that a full | |
| filesystem check is required before backing up the superblock due to | |
| changes in the feature flags. (Addresses Debian Bug: #454926) | |
| Fix fsck to only treat the '#' character as a comment at the beginning | |
| of the line in /etc/fstab. Otherwise fstabs for the fuse filesystem | |
| will cause fsck to issue an bogus warning message. | |
| (Addresses Gentoo bug: #195405, Addresses Sourceforge bug: #1826147) | |
| Format control characters and characters with the high eighth bit set | |
| when printing the contents of the blkid cache, to prevent filesystems | |
| with garbage labels from sending escape sequences to the user's screen | |
| that might, for example place it in graphics mode. (Addresses Ubuntu | |
| Bug: #78087) | |
| Fix sign-extension problem on 64-bit systems in in the com_err | |
| library. (Addresses Sourceforge Bug: #1809658) | |
| Avoid division by zero error when probing an invalid FAT filesystem in | |
| the blkid library. (Addresses Sourceforge Bug: #1831627) | |
| Update Dutch, Polish, and Vietnamese translations from the Translation | |
| Project. Remove the Rwandan translation upon advice of the | |
| Translation Project. | |
| Programmer's Notes: | |
| ------------------- | |
| Fix the libss "make check" regression test so that it works if the | |
| current directory is not in the user's path or if the libss shared | |
| library is not installed. (Addresses Sourceforge Bug: #1848974) | |
| Fixed spelling mistakes, typos, and otherwise clarified man pages. | |
| (Addresses Debian Bugs: #444883, #441872) | |
| Fixed various Debian packaging issues --- see debian/changelog for | |
| details. (Addresses Debian Bugs: #437720, #451172, #458017) | |
| Fix build failure on non-Linux/non-Hurd/non-Masix systems. | |
| (Addresses Sourceforge Bug: #1859778) | |
| Fix Hurd portability issues. (Addresses Debian Bug: #437720) | |
| E2fsprogs 1.40.3 (December 5, 2007) | |
| =================================== | |
| Fix a potential security vulnerability where an untrusted filesystem | |
| can be corrupted in such a way that a program using libext2fs will | |
| allocate a buffer which is far too small. This can lead to either a | |
| crash or potentially a heap-based buffer overflow crash. No known | |
| exploits exist, but main concern is where an untrusted user who | |
| possesses privileged access in a guest Xen environment could corrupt a | |
| filesystem which is then accessed by the pygrub program, running as | |
| root in the dom0 host environment, thus allowing the untrusted user to | |
| gain privileged access in the host OS. Thanks to the McAfee AVERT | |
| Research group for reporting this issue. (Addresses CVE-2007-5497.) | |
| Fix hueristics in blkid which could cause a disk without partitions to | |
| be incorrectly skipped when a loopback device is present. (Addresses | |
| Red Hat Bugzilla #400321.) | |
| Fix e2image so that in raw mode it does not create an image file which | |
| is one byte too large. | |
| Change mke2fs's usage message so it recommends the preferred -E option | |
| instead of the deprecated -R option. | |
| Enhance the blkid library so it will recognize squashfs filesystems. | |
| (Addresses Red Hat Bugzilla #305151.) | |
| Enhance e2fsck so it will force the backup superblocks to be backed up | |
| if the filesystem is consistent and key constants have been changed | |
| (i.e., by an on-line resize) or by e2fsck in the course of its | |
| operations. | |
| Enhance blkid's detection of FAT filesystems; so that USB disks with | |
| only a single bootable partition will not get missed. | |
| E2fsck will no longer mark a filesystem as invalid if it has time | |
| errors (i.e., if superblock mount time or last write time is in the | |
| future) and the user refuses to fix the problem. | |
| The Ubuntu init scripts don't properly set the system time correctly | |
| from hardware clock if the hardware clock is configured to tick local | |
| time instead of GMT time. Work around this as best as we can by | |
| providing an option, buggy_init_scripts, in /etc/e2fsck.conf which can | |
| be set on Ubuntu systems. (Addresses Debian Bug #441093, and Ubuntu | |
| Bug #131201.) | |
| Fix fsck to ignore /etc/fstab entries for bind mounts. (Addresses Red | |
| Hat Bugzilla #151533.) | |
| Fix e2fsck so that if the superblock is corrupt, but still looks | |
| vaguely like an ext2/3/4 superblock, that it automatically tries to | |
| fall back to the backup superblock, instead of failing with a hard | |
| error. | |
| Make the e2fsprogs program more robust so that they will not crash | |
| when opening a corrupt filesystem where s_inode_size is zero. | |
| Change e2fsck so it uses sscanf() instead of atoi() so it non-numeric | |
| arguments are detected as such and the parse error is reported to the | |
| user. (Addresses Debian Bug #435381.) | |
| Change e2fsck so it will not complain if a file has blocks reallocated | |
| up to the next multiple of a system's page size. | |
| Fix bug in ext2fs_check_desc() which will cause e2fsck to complain | |
| about (valid) filesystems where the inode table extends to the last | |
| block of the block group. (Addresses Red Hat Bugzilla #214765.) | |
| Fix a bug in ext2fs_initialize() which causes mke2fs to fail while | |
| allocating inode tables for some relatively rare odd disk sizes. | |
| (Addresses Red Hat Bugzilla #241767.) | |
| Add Catalan translation and update Dutch and Swedish translations | |
| from the Translation Project. | |
| Fix big-endian byte-swapping bug in ext2fs_swap_inode_full(). We | |
| still had an issue when trying to figure out whether we need to | |
| byte-swap fast symlinks that contained extended attributes. | |
| Fixed spelling mistakes, typos, and otherwise clarified man pages. | |
| (Addresses SourceForge Bug #1821333.) | |
| Programmer's Notes: | |
| ------------------- | |
| Fix mke2fs tests to avoid needing any significant ^M (CR) characters | |
| Add "make check" to the RPM spec file | |
| Fix "make install" and 'make unstall" in misc/Makefile.in so that it | |
| works correctly when the prefix is not the root directory. | |
| Fix the resize2fs tests, r_move_itable and r_resize_inode, so they | |
| clena up after themselves by deleting the test.img temporary file | |
| after completing the test. | |
| Fixed a corner case bug ext2fs_unlink() when trying to delete the | |
| first directory entry in a directory block and the last directory | |
| entry in the previous directory block is not in use. Fortunately | |
| ext2fs_unlink() is only used by debugfs and e2fsck, and in e2fsck in | |
| places where it is extremely unlikely to run into this corner case. | |
| Fix missing dependency which would cuase parallel builds to fail. | |
| (Addresses Sourceforge Bug #1842331.) | |
| Fix a build error on newer gcc caused by lib/ext2fs/ismounted.c | |
| calling open(O_CREATE) with a missing mode parameter. | |
| Fix the test_ss.c in lib/ss so it can be used as an example | |
| application program for the library as well as a regression test | |
| suite. | |
| Fix ext2fs_dblist_dir_iterate() so that error codes and abort codes | |
| are properly passed back up through the call stack. | |
| E2fsprogs 1.40.2 (July 12, 2007) | |
| ================================ | |
| A recent change to e2fsck_add_dir_info() to use tdb files to check | |
| filesystems with a very large number of filesystems had a typo which | |
| caused us to resize the wrong data structure. This would cause a | |
| array overrun leading to malloc pointer corruptions and segfaults. | |
| Since we normally can very accurately predict how big the the dirinfo | |
| array needs to be, this bug only got triggered on very badly corrupted | |
| filesystems. | |
| Fix a bug in e2fsck which caused it to incorrectly salvange | |
| directories when the last entry's rec_len is bogusly too big. This | |
| resulted in a nonsense filesystem corruption to be reported, and | |
| required a second run of e2fsck to fully fix up the directory. | |
| Update tune2fs man page to include more discussion of reserved blocks | |
| (Addresses Launchpad bug #47817) | |
| Update Turkish, Polish, Dutch, and Vietnamese PO files from the | |
| Translation Project | |
| E2fsprogs 1.40.1 (July 7, 2007) | |
| =============================== | |
| Fix bug which could cause libblkid to loop forever. When revalidating | |
| a partition where there is obsolete information in /etc/blkid.tab, we | |
| end up freeing a the type tag without clearing dev->bid_type, causing | |
| blkid_verify() to loop forever. (Addresses Debian Bug: #432052) | |
| The Turkish translation has a bug in it where it has the translation | |
| of "E@e '%Dn' in %p (%i)" to "E@E". This causes @E to be expanded at | |
| @E, recursively, forever, until the stack fills up and e2fsck core | |
| dumps. We fix this by making e2fsck stop @-expansions after a | |
| recursive depth of 10, which is far more than we need. | |
| (Addresses Sourceforge Bug: #1646081) | |
| Compile the default mke2fs.conf into mke2fs program. People are | |
| getting surprised by mke2fs creating filesystems with different | |
| defaults than earlier versions of mke2fs if mke2fs.conf is not | |
| present. So we now create a built in version of mke2fs.conf file | |
| which is used by mke2fs if the /etc/mke2fs.conf is not present. | |
| (Addresses SourceforgeBug: #1745818) | |
| Improve the config/parse_types.sh helper script. Fix a potential | |
| security problem if e2fsprogs is built as root (as Gentoo does!). In | |
| addition fix the script and how it is called from the configure script | |
| so that it does the right thing when cross-compiling. (Fixes Gentoo | |
| bug: #146903) | |
| Update Vietnamese, French, and Dutch PO files from the Translation | |
| Project. Also created a new e2fsprogs.pot file for translator. | |
| Fix bogus strip permission errors when building under Debian. When | |
| building the e2fsprogs dpkg's, the dh_strip command emits a large | |
| number of error messages caused by the permissions not being right. | |
| So run dh_fixperms before running dh_strip. | |
| Programmer's Notes: | |
| ------------------- | |
| Add new function: profile_set_default(). This function sets the value | |
| of the pseudo file "<default>". If the file "<default>" had | |
| previously been passed to profile_init(), then def_string parameter | |
| will be parsed and used as the profile information for the "<default>" | |
| file. | |
| Fix mk_cmds's error reporting so that it is unambiguous that it is the | |
| mk_cmds script which is generating the error. (Obviates Gentoo patch: | |
| e2fsprogs-1.32-mk_cmds-cosmetic.patch) | |
| Fix the test suite to use LC_ALL instead of LANG. LC_ALL is the "high | |
| priority" environment variable that overrides all others, where as | |
| LANG is the lowest priorty environment variable. If LC_ALL is set, it | |
| doesn't matter whether LANG, LANGUAGE, LC_COLLATE, LC_MESSAGES, and | |
| the all the rest are set. This will assure that the locale when | |
| running the test suites is the "C" locale. (Obviates Gentoo patch: | |
| e2fsprogs-1.38-tests-locale.patch) | |
| E2fsprogs 1.40 (June 29, 2007) | |
| ============================== | |
| Fix divide by zero error in blkid's NTFS probing logic. | |
| Add new blkid -g option which causes the blkid cache to be garbage | |
| collected. | |
| Fix a bug in libblkid which could cause the internal field bid_type to | |
| become corrupted. Fortunately bid_type isn't used much, and bid_label | |
| and bid_uuid is only used by debugging code, so the impact of this bug | |
| was very minor. | |
| Mke2fs will now store the RAID stride value when a filesystem is | |
| created with a requested RAID stride, and then use it automatically in | |
| resize2fs. | |
| Mke2fs has a sanity check added to make sure (inode_size * num_inodes) | |
| isn't too big. In some cases Lustre users have tried specifying an | |
| inode size of 4096 bytes, while keeping an inode ratio of one inode | |
| per 4096 bytes. | |
| Improve sanity check in e2fsck's algorithm for finding a backup | |
| superblock, so that it won't accidentally find a superblock that was | |
| located in the journal, and then later reject it as being not a valid | |
| backup superblock. | |
| Fix e2fsck get_size logic so that it will work with the Linux floppy | |
| driver. The Linux floppy driver is a bit different from the other | |
| block device drivers, in that if the device has been opened with | |
| O_EXCL, it disallows another open(), even if the second open() does | |
| not have the O_EXCL flag. (Addresses Debian Bug: #410569) | |
| Fix error checking of badblock's last-block and start-block arguments. | |
| (Addresses Debian Bug: #416477) | |
| Fix e2fsck so that it doesn't overwrite the backup superblocks when | |
| recovering a journal until the master superblock has been confirmed as | |
| being sane. | |
| Change the blkid library to be much more paranoid about concluding | |
| that a partition contains an NTFS filesystem, and fetch the UUID and | |
| LABEL information from NTFS filesystems. (Addresses Launchpad Bug: | |
| #110138) | |
| Factor out the code which sets the default journal size and move it | |
| into libext2fs. | |
| Enhance e2fsck so it will recreate the ext3 journal if the original | |
| journal inode was cleared to due it being corrupt after finishing the | |
| filesystem check. | |
| Fix e2fsck so that it updates the journal inode if it is corrupted and | |
| the backup journal information from the superblock was successfully | |
| used to recover the filesystem. | |
| Fix e2fsck so that it checks all of the blocks in the journal inode | |
| for validity. The original code only checked the direct blocks to | |
| make sure the journal inode was sane. Unfortunately, if some or all | |
| of the indirect or doubly indirect blocks were corrupted, this would | |
| not be caught. | |
| Add support in blkid to detect LUKS encrypted partitions. | |
| Add extra sanity checks for extended attributes in the case where the | |
| size is zero but the offset is very large. | |
| Fix byte-swapping issues for large inodes in ext2fs_read_inode_full() | |
| and ext2fs_get_next_inode_full(). | |
| Clarify the copyright licenses used by the various libraries in | |
| the top-level COPYING file (Red Hat Bugzilla: 166058) | |
| Make mke2fs's defaults when /etc/mke2fs.conf doesn't exist more sane. | |
| Fix mke2fs and debugfs to support large (> 16 bit) uid's and gid's. | |
| Remove check in e2fsck which requires EA's in inodes to be sorted; | |
| they don't need to be sorted, and e2fsck was previously wrongly | |
| clearing unsorted EA's stored in the inode structure. | |
| Allow mke2fs or tune2fs to create a substantially larger journal (up | |
| to 10,240,000 blocks). | |
| Fix MD superblock detection, and make sure the correct UUID is | |
| reported from the MD superblock. | |
| Fix a signed vs. unsigned bug in debugfs. | |
| Enhance debugfs's date parser so that it accepts integer values. | |
| Fix e2fsck's pass1c accounting so it doesn't terminate too early if a | |
| file with multiply claimed blocks is hard linked. or not at all if the | |
| root directory contains shared blocks | |
| Enhance debugfs so it can modify the block group descriptors using the | |
| command set_block_group_descriptor. | |
| Improve e2fsck's reporting of I/O errors so it's clearer what it was | |
| trying to do when an error happens | |
| Fix a bug in in how e2fsprogs byte swaps inodes containing fast | |
| symlinks that have extended attributes. (Addresses Red Hat Bugzilla: | |
| #232663 and LTC Bugzilla: #27634) | |
| Fix potential file descriptor leak in ext2fs_get_device_size() in an | |
| error case. | |
| Add libreadline.so.5 support to libss. | |
| Impove badblocks -n/-w exclusive usage message. | |
| Fix dump_unused segfault in debugfs when a filesystem is not open | |
| Fix memory leak in blkid library. (Addresses Debian Bug: #413661) | |
| Allow the debugfs lcd command to work w/o a filesystem being open. | |
| (Addresses LTC Bugzilla #27513) | |
| Fix e2fsck to clear i_size for special devices with a bogus i_blocks | |
| field on the first pass. | |
| Fix e2fsck to set the file type of the '..' entry when connecting | |
| a directory to lost+found. (Addresses Lustre Bug: #11645) | |
| Enhance e2fsck to recover directories whose modes field were corrupted | |
| to look like special files. This is probably only useful in | |
| artificial test cases, but it will be useful if we ever do the "inodes | |
| in directory" idea for ext4. | |
| Allow debugfs to dump (and rdump) > 2GB files. (Addresses Debian Bug: | |
| #412614) | |
| Fix resize2fs parsing of size parameter (in sector units). This was | |
| actually a bug in libe2p's parse_num_blocks() function. When handling | |
| the 's' suffix, it was ignoring the blocksize information passed in | |
| from the caller and always interpreting the number in terms of a 1k | |
| blocksize. (Addresses Debian Bug: #408298) | |
| There was a floating point precision error which could cause e2fsck to | |
| loop forever on really big filesystems with a large inode count. | |
| (Addresses Debian Bug: #411838) | |
| Fix memory leak in ext2fs_write_new_inode() | |
| Add support for using a scratch files directory to reduce e2fsck's | |
| memory utilization on really big filesystems. This uses the TDB | |
| library. See the [scratch_files] section of the e2fsck.conf man page | |
| for more details. | |
| Fixed type-punning bug which caused dumpe2fs to crash on the Arm | |
| platform (Addresses Debian Bug: #397044) | |
| Add explanatory message to badblocks that -n and -w are mutually exclusive | |
| (Addresses Debian Bug: #371869) | |
| Allow debugfs and dumpe2fs to support fs features under development. | |
| Add support for the new flag EXT2_FLAG_SOFTSUPP_FEATURES flag to | |
| ext2fs_open() , which allows application to open filesystes with features | |
| which are currently only partially supported by e2fsprogs. | |
| Allow unix_io to support offsets greater than 2G (Addresses | |
| SourceForge Bug: #1547922) | |
| Fixed overflow and signed/unsigned problems caused by the number of | |
| blocks or inodes exceeding 2**31 or being close to 2**32-1. | |
| Add support for unsigned directory hash calculations with hints in the | |
| superblock to fix cross-architectural portability for htree | |
| directories with filenames where the high 8th bit is set. (Addresses | |
| Debian: #389772) | |
| Fix resize2fs so that it gives user-intelligible error messages if the | |
| filesystem or the kernel does not support on-line resizing. | |
| (Addresses Debian Bug: #380548) | |
| Require mke2fs -F -F for really dangerous operations, since -F is | |
| needed for less dangerous operations such as creating filesystems | |
| images in regular files, or creating filesystems on whole block | |
| devices. These relatively innocuous usages should NOT be confused | |
| with running mke2fs on an apparently-mounted or in-use filesystem. | |
| Allow the default inode size to be specified into the mke2fs.conf | |
| file. | |
| Make the smallest default journal size is big enough so that on-line | |
| resizing should always work. | |
| Fix silly spelling error in e2fsck. (Addresses SourceForge bug: | |
| #1531372) | |
| Fix debugfs coredump when lsdel is run without an open filesystem | |
| (Addresses Debian Bug: #378335) | |
| Fix debugfs display bug us that bytes that have the high bit set are | |
| displayed as "ec" instead of "ffffffec". | |
| Add support in lsattr so it will display the EXT4_EXTENTS_FL flag. | |
| Device mapper scanning wasn't working in the blkid library because the | |
| pathnames had an extra "/dev" when they were being probed. | |
| Add GFS/GFS2 support to the blkid library. | |
| Fix blkid support of empty FAT filesystem labels. | |
| Avoid recursing forever (or for a long time) when the blkid library | |
| searches for a device and there are symlinks to directories in /dev. | |
| Avoid unaligned halfword access in blkid when accessing FAT | |
| superblocks, as this will cause Sparc/Solaris systems to throw a | |
| SIGBUS error. | |
| The latest devmapper libraries requires pthreads, add -lpthreads to | |
| the static link libraries for e2fsck.static if devmapper is enabled. | |
| (Addresses Debian bug: #388718) | |
| Improve the (non-installed, for experts only) findsuper program by | |
| printing the uuid and label from the superblocks, as well as the | |
| starting and ending offsets of the filesystem given the information in | |
| the superblock. Omit by default printing superblocks that are likely | |
| found in located in an ext3 journal unless an explicit -j option is | |
| given. | |
| Updated Spanish, French and Dutch translations and added Catalan | |
| translation. (Addresses Debian bug: #411562) | |
| Use FreeBSD's DIOCGMEDIASIZE and DIOCGDINFO ioctls if available when | |
| determining a partition's size, since binary searching to determine | |
| the device doesn't work on FreeBSD. | |
| Documentation about UUID's is available in enough places, and it's | |
| awkward to deal with debian-legal's insanities. So I'm caving in the | |
| "more-lunatic-than-RMS" wing of Debian by removing RFC-4122 so we | |
| don't have do the dfsg tarball. Also remove the rule that only tried | |
| to install RFC-4122 on Ubuntu, since Ubuntu seems to want to fetch | |
| e2fsprogs exclusively from Debian. (Addresses Debian Bug: #407107) | |
| Fix the info-dir line so that the menu name does not contain a .info | |
| prefix. First of all, it's ugly, secondly, it causes the install-info | |
| command to fail to remove the com_err info file from the | |
| /usr/share/info/dir file when the comerr-dev package is removed and | |
| purged. (Addresses Debian Bug: #401711) | |
| Fixed spelling mistakes, typos, and otherwise clarified man pages. | |
| (Addresses Debian Bug: #369761, #373004, #379695) | |
| Fixed various Debian packaging issues --- see debian/changelog for | |
| details. (Addresses Debian Bugs #389554, #390664, #413208, #419605, | |
| #408352, #415560, #399155) | |
| Programmer's notes: | |
| ------------------- | |
| E2fsck now supports the %It expansion when printing a problem report. | |
| It will print the type of the inode in the problem context. | |
| Fix misc/Makefile.in so that it builds even if e2fsck hasn't been built yet | |
| (Addresses Sourceforge Bug: #1565561) | |
| Remove unused variables and other lint/gcc -Wall cleanups | |
| Add check to ext2fs_get_device_size() so it will return EFBIG for for | |
| filesystems contained in regular files where the filesystem image size | |
| is returned by stat64(). | |
| Set local environment variables to C so mk_cmds and compile_et always | |
| work. (Addresses SourceForge Bug: #1532177) | |
| Added the 64-bit byte swapping function ext2fs_swab64(). | |
| Added two new helper functions to prevent 2**31/2**32-1 overflow | |
| problems: ext2fs_div_ceil() and e2p_percent(). | |
| Create new ext2fs library inline functions ext2fs_group_first_block() | |
| and ext2fs_group_last_block() in order to calculate the starting and | |
| ending blocks in a block group. | |
| Create the generated files read-only to remind developers not to edit them. | |
| Add support for autoconf 2.60 (with backwards compatibility for older | |
| versions of autoconf). | |
| Added an "make rpm" target to top-level Makefile | |
| Added various FreeBSD portability fixes. | |
| Exclude mercurial files from the RPM build tree to speed up copy/build. | |
| Use root_sysconfdir to define the locations of mke2fs.conf and | |
| e2fsck.conf instead of using a hard-coded /etc pathname. | |
| Prevent e2fsck.h and ext2_ext_attr.h from getting included multiple times. | |
| Fixed "make clean" in blkid's Makefile.in file from removing tst_*.c files. | |
| If diff -u is supported, use it to report test failures. | |
| Updates/improvements to RPM spec file | |
| Add on-disk format definitions for the following new features: | |
| EXT4_FEATURE_RO_COMPAT_HUGE_FILE, EXT4_FEATURE_RO_COMPAT_GDT_CSUM, | |
| EXT4_FEATURE_RO_COMPAT_DIR_NLINK, EXT4_FEATURE_INCOMPAT_64BIT, | |
| EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE | |
| Add a new make target "checked-failed" in the tests directory which | |
| reruns any failed tests | |
| Update draft-leach-uuids-guids-01.txt with rfc4122.txt | |
| Fix miscellaneous bugs reported by Coverity: Dead code, potential nul | |
| pointer dereferences, memory leaks, etc. None were security-criticial | |
| problems. | |
| Fix up usage and decrement error messages in the test_icount program | |
| Add debugging code to the com_err library; if the environment variable | |
| COMERR_DEBUG is set to 1, print out debugging messages as error tables | |
| are added and removed from the com_err library. If the | |
| COMERR_DEBUG_FILE environment variable is set (and the process is not | |
| setuid) the debugging messages may be redirected to a file. | |
| Change all of the e2fsprogs programs to use the newer add_error_table() | |
| and remove_error_table() interfaces instead of the much older | |
| initialize_*_error_table() function. | |
| Add TDB support into the ext2fs library. This allows us to have a | |
| guaranteed library we can count on always being present so we can | |
| store data in an on-disk database. | |
| Add support for using TDB to store the icount data, so we don't run out | |
| of memory when checking really large filesystems. | |
| Change the regression test suite so that it skips empty test directories. | |
| Define the l_i_iversion field in ext2_inode. The l_i_version field is | |
| now defined from the old l_i_reserved1 field in the ext2 inode. This | |
| field will be used to store high 32 bits of the 64-bit inode version | |
| number. | |
| Add Makefile production rule for e2fsprogs.spec in case it gets | |
| deleted. | |
| Add new function profile_get_uint() to allow for a clean way to fetch | |
| unsigned integers from the context. | |
| Add test to make sure the ext2 superblock structure is 1024 bytes. | |
| Fix typo in name of f_dup4 regression test | |
| Add new function blkid_gc_cache() which performs a garbage collection | |
| pass on the /etc/blkid.tab file. | |
| The ext2fs_open() function now sets EXT2_FLAG_MASTER_SB_ONLY. In | |
| general, only e2fsck (after the filesystem is clean), tune2fs, and | |
| resize2fs should change the backup superblocks by default. Most | |
| callers of ext2fs_open() should not be touching any superblock fields | |
| which require the backups to be touched. | |
| Add new function to libext2fs, ext2fs_default_journal_size(), which | |
| returns the default journal size. | |
| E2fsprogs 1.39 (May 29, 2006) | |
| ============================= | |
| Fix 32-bit cleanliness in e2fsprogs so that we can support filesystems | |
| between 2**31 and 2**32 blocks. | |
| Change mke2fs to use /etc/mke2fs.conf as a configuration file to | |
| configure the filesystem features, blocksize, and inode_ratio for | |
| different filesystem types. | |
| Mke2fs will now create filesystems hash trees and on-line resizing | |
| enabled by default, based on the new /etc/mke2fs.conf file. | |
| The e2fsprogs tools (resize2fs, e2fsck, mke2fs) will open the | |
| filesystem device node in exclusive mode to prevent accidents by | |
| system administrators. In the case of resize2fs and mke2fs, it will | |
| only use exclusive mode if the filesystem is not mounted. | |
| Fixed a bug in mke2fs which caused it to to fail when creating the | |
| resize inode for large filesystems. (Addresses Debian Bug #346580) | |
| When allocating space for the RAID filesystems with the stride | |
| parameter, mke2fs will now place each portion of the group's inode | |
| table right up after the superblock (if present) in order to minimize | |
| fragmentation of the freespace. | |
| Speed up mke2fs and e2fsck by writing inode and block bitmaps more | |
| efficiently by writing the inode and block bitmaps in one pass, thus | |
| reducing the number of disk seeks required. | |
| Add support for on-line resizing to resize2fs. | |
| Fix blkid library so that logic to determine whether or not a device's | |
| cached information in /etc/blkid.tab needs to be verified or not | |
| doesn't get confused by a system clock which is insane (for example, | |
| if the battery is dead on a Macintosh running PPC Linux. (Addresses | |
| Red Hat Bug: #182188) | |
| The blkid library will now store the UUID of the external journal used | |
| by ext3 filesystems, so that in the future, the userspace mount binary | |
| can use this to find the location of the external journal and pass | |
| this information to the kernel. | |
| E2fsck will now consult a configuration file, /etc/e2fsck.conf to | |
| control how various options should be handled. See the e2fsck.conf | |
| man page for more details. (Addresses Debian Bug: #150295) | |
| E2fsck now prints an explanatory message when delaying a filesystem | |
| check when the system is running on battery. (Addresses Debian Bug: | |
| #350306) | |
| E2fsck will detect if the superblock's last mount field or last write | |
| field is in the future, and offer to fix if so. (Addresses Debian Bug | |
| #327580) These problems will be fixed automatically in preen mode | |
| since Debian's boot sequence bogusly doesn't set the time correctly | |
| until potentially very late in the bootup process, and this can cause | |
| false positives which will cause users' systems to fail to boot. | |
| (Addresses Debian Bugs #343662 and #343645) | |
| E2fsck now checks to see if the superblock hint for the location of | |
| the external journal is incorrect, and if so, offer to update it. | |
| (Addresses Debian Bug: #355644) | |
| Fix e2fsck from segfaulting on disconnected inodes that contain one or | |
| more extended attributes. (Addresses Debian Bug: #316736, #318463) | |
| E2fsck will stop and print a warning if the user tries running a | |
| read/write badblocks test on a read-only mounted root filesystem. | |
| Fix a memory leak in e2fsck's error paths. (Thanks to Michael | |
| C. Thompson for pointing these out; they were originally found using | |
| Coverity.) | |
| When resizing a file containing a filesystem, resize2fs will expand or | |
| truncate a file as necessary. (Addresses Debian Bug: #271607) | |
| Resize2fs will now automatically determine the RAID stride parameter that | |
| had been used to create the filesystem, and use that for newly created | |
| block groups. The RAID stride parameter may also be manually specified | |
| on the command line using the new -S option to resize2fs. | |
| Fix mke2fs so that it correctly creates external journals on | |
| big-endian machines (such as a S/390). | |
| Fix a bug in the e2p library which could cause dumpe2fs to (rarely) | |
| fail to print out the journal or hash seed UUID. (Thanks to Guillaume | |
| Chambraud for pointing this out.) | |
| Dumpe2fs will now print the size of the journal (if present). | |
| Fix debugfs's set_inode_field command so it can properly set the frag, | |
| fsize, uid_high, gid_high, and author fields in the inode instead of | |
| silently failing, and so that setting the i_size actually sets i_size | |
| correctly. | |
| Add a new debugfs command, set_current_time, which sets fs->now so | |
| that regression test suites can repeatedly modify the filesystem's | |
| last_write fields. | |
| Fix a bug in debugfs's icheck which would incorrectly report the owner | |
| of an extended attribute block. | |
| Fix the debugfs commands htree_dump, dx_hash, and list_dir so they print a | |
| print a usage message when an illegal option character is given. | |
| Fix debugfs's dump_unsued command on filesystems with a 64k blocksize | |
| so it won't core dump. (Addresses SourceForge bug #1424311) | |
| Fix mklost+found so that it creates a full-sized directory on | |
| filesystems with larger block sizes. | |
| Fix a file descriptor leak in blkid library. | |
| Fix a display bug in "badblocks -sv" so that the done message properly | |
| clears the block number at the end of the test. (Addresses Debian Bug | |
| #322231) | |
| Allow fractional percentages to the -m option in mke2fs and tune2fs | |
| (Addresses Debian Bug: #80205) | |
| Use fstat/fstat64 in getsize.c if the the target is a regular file, | |
| instead of attempting to do a binary search. Fix some fd leaks in | |
| error cases. | |
| Add support for device mapper library to the blkid library to ensure | |
| that the "best" (i.e., leaf) device is probed by the blkid library. | |
| Fix the blkid library so that it notices when an ext2 filesystem is | |
| upgraded to ext3. | |
| Improve the blkid's library VFAT/FAT detection; it now understands | |
| labels stored in the root directory, and is more paranoid about | |
| checking the FAT superblock values. | |
| Fixed a fd leak in the uuid library which was causing problems for the | |
| LVM tools. (Addresses Debian Bug: #345832) | |
| Add support for the reiser4 and software suspend partitions to the | |
| blkid library. Also add support for extract the label from iso9660 | |
| filesystems. | |
| Fix a compile_et bug which miscount the number of error messages if | |
| continuations are used in the .et file. | |
| Add extra sanity checks to protect users from unusual cirucmstances | |
| where /etc/mtab may not be sane, by checking to see if the device is | |
| reported busy (works on Linux 2.6) kernels. (Addresses Debian Bug | |
| #319002) | |
| Updated French, Dutch, Polish, and Swedish translations. (Addresses Debian | |
| Bug: #343149, #341911, #300871, #316604, #316782, #330789) | |
| Fix use-after-free bug in e2fsck when finishing up the use of the | |
| e2fsck context structure. | |
| Fixed spelling mistakes, typos, and otherwise clarified man pages and | |
| documentation. (Addresses Debian Bugs: #329859, #322188, #316811, | |
| #312515, #351268, #357951, #347295, #316040, #368392, #368393, #368394, | |
| #368179) | |
| Fixed various Debian packaging issues --- see debian/changelog for | |
| details. (Addresses Debian Bugs #317862, #320389, #290429, #310950, | |
| #310428, #330737, #330736, #329074, #356293, #360046, #366017, #364516, | |
| #362544, #362970) | |
| Programmer's notes: | |
| ------------------- | |
| Update config.guess and config.sub to latest version (2006-02-23) from | |
| FSF. | |
| Fix asm_types.h type conflicts on AMD 64 platforms. (Addresses Debian | |
| Bugs: #360661, #360317) | |
| Fixed the Makefile so that they work correctly on newer versions of | |
| GNU make (i.e., 3.81). | |
| Add valgrind support to the regression test suites, and eliminate | |
| false positives from valgrind. | |
| Add a regression test suite for the blkid library. | |
| Fix a fencepost error in resize2fs caught by valgrind. | |
| Fix compiler warnings about missing memcpy prototypes. | |
| We no longer have the sparc assembly code in the header file any more, | |
| so we shouldn't set _EXT2_HAVE_HAS_BITOPS_ for the sparc. This would | |
| break compiles on the sparc architectures when using gcc. | |
| In the libext2fs library, add the new field fs->now which if non-zero | |
| is used instead of the system time when setting various filesystem | |
| fields (last modified time, last write time, etc.) | |
| Fix gcc 4.01 complaints by adding a missing #include <string.h> to | |
| ext2fs.h which is needed since the inline functions use memcpy(). | |
| (Addresses Sourceforge Bug #1251062) | |
| Use BUILD_CFLAGS and BUILD_LDFLAGS instead of CFLAGS and LDFLAGS in | |
| the build system when building files in the util directory which are | |
| needed during the build process. This avoids potential problems when | |
| cross-compiling and some of the options specified in CFLAGS or LDFLAGS | |
| are not recognized as valid by the host compiler. (Addresses | |
| Sourceforge Bug #1261547) | |
| Clean up the blkid library by making the superblock and generic i/o | |
| functions to be more generic. Clean up interface to the probe | |
| function, and fix memory leak. Finallly, remove an unneeded reference | |
| to probe.h in the lib/blkid/resolve.c | |
| Add an ext2fs_read_bb_FILE regression test to confirm proper detection | |
| of invalid block #'s. | |
| The x86 asm constraints for ext2fs_{set/clear}_bit have been fixed to | |
| indicate that the the function read/writes the memory location. | |
| Fix various gcc -Wall complaints. | |
| Add a dependency to make sure that the subdirectories are created | |
| before creating all of the object files, in order to address parallel | |
| build problem in the library Makefiles. (Addresses Sourceforge Bug: | |
| #1261553) | |
| Add $(LDFLAGS) to the command line argument when generating an ELF or | |
| Solaris shared library, to allow cross-compile and other builds that | |
| might need to specify -L paths to needed libraries. (Addresses | |
| Sourceforge Bug #1261549) | |
| Add a new feature, EXT2_FEATURE_COMPAT_LAZY_BG, which is initially | |
| intended for testing purposes. It allows an ext2/ext3 developer to | |
| create very large filesystems using sparse files where most of the | |
| block groups are not initialized and so do not require much disk | |
| space. Eventually it could be used as a way of speeding up mke2fs and | |
| e2fsck for large filesystem, but that would be best done by adding an | |
| RO_COMPAT extension to the filesystem to allow the inode table to be | |
| lazily initialized on a per-block basis, instead of being entirely | |
| initialized or entirely unused on a per-blockgroup basis. | |
| Fix backwards compatibility so e2fsprogs will better compile on Linux | |
| 2.0.35 systems. | |
| Make test scripts more robust against locale-related environment variables | |
| Fix type warning problem with sizeof() in ext2fs_open2(). | |
| Fix type warning problem with time_t in debugfs. | |
| E2fsprogs 1.38 (June 30, 2005) | |
| ============================== | |
| Fix blkid's test programs (built with "make check") compile correctly | |
| even without "configure --enable-blkid-debug". | |
| Fix ia64 core dump bug caused by e2fsprogs running afoul of C99 strict | |
| type aliasing rules on newer gcc compilers. (Addresses Red Hat | |
| Bugzilla ##161183.) | |
| Fix com_err library to make it more compatible with recent changes | |
| made to the com_err library in MIT Kerberos V5 version 1.4. | |
| (Addresses Sourcefroge Bug #1150146) | |
| General cleanup of messages printed by e2fsprogs programs for grammar, | |
| consistency, and to make life easier for translators. Fixed a few | |
| strings containing English that had not been marked as needing | |
| translations. Removed strings that do not need to be translated, to | |
| make life easier for translators. | |
| Mke2fs and badblocks will take advantage of a feature in Linux 2.6 to | |
| test to see if a device appears to be in use instead of just relying | |
| on /proc/mounts and /etc/mtab. (Addresses Debian Bug #308594). | |
| Fix portability problem in the filefrag program affecting platforms | |
| where the size of an integer is smaller than the size of a long. | |
| (Addresses Debian Bug #309655) | |
| Mke2fs will now use a larger journal by default for filesystems | |
| greater than 4GB. (128 MB instead of 32MB). | |
| Mke2fs will refuse to create filesystems greater than 2**31-1 blocks, | |
| unless forced. This is to avoid signed vs. unsigned kernel bugs in | |
| block numbers that still need to be fixed. | |
| The blkid program has a new option which will more efficiently search | |
| for device when it is known (or expected) that only one matching | |
| device will be found in the system, such as when doing a lookup by | |
| UUID. | |
| Debian's e2fsprogs-specific initrd fragment will avoid including | |
| unnecessary libraries into the initrd ramdisk by unsetting LD_PRELOAD | |
| and LD_LIBRARY_PATH, and filtering out libraries found in | |
| /etc/ld.so.preload. (Addresses Debian Bug: #304003) | |
| Fixed a potential portability issue in the blkid programs for | |
| architectures where the char type is unsigned. (Addresses Sourceforge | |
| Bug: #1180585) | |
| Fix a bug in filefrag so that it doesn't falsely count an extra | |
| discontinuity when the first block found is an indirect block. | |
| (Addresses Debian Bug #307607). | |
| Fix blkid's recognition of cramfs filesystems, and enhance it to be | |
| able to handle cramfs labels. | |
| Fix debugfs's stat command to not core dump when a filesystem is not | |
| open. | |
| Fix e2fsck's handling of error conditions caused by the resize inode | |
| claiming blocks that are also used by other inodes, a filesystem | |
| corruption which was commonly caused by a bug in Fedora Core 3's | |
| resize2fs program. | |
| Fixed bug in filefrag which caused it to fail on non-ext2/3 | |
| filesystems. (Addresses Debian Bug: #303509) | |
| If the superblock last mount time indicates that the system clock may | |
| not be accurate, then e2fsck will omit checking inodes' deletion time | |
| field for indications of a potential corrupted orphaned inode list. | |
| (Previously e2fsck only ommited these LOW_DTIME checks when the | |
| superblock's last write time looked insane.) | |
| Fixed a IA64 core dump bug in the e2p library which affected dumpe2fs. | |
| (Addresses Debian bug #302200) | |
| Make the blkid library more paranoid about being run from setgid | |
| programs, and to use __secure_getenv() from libc if it is available. | |
| Fixed spelling mistakes, typos, and otherwise clarified man pages. | |
| (Addresses Debian Bugs: #304591, #304592, #304594, #304597, #304593 | |
| and Sourceforge Bug: #1189803) | |
| Updated and fixed translations. | |
| Fixed various Debian packaging issues --- see debian/changelog for | |
| details. | |
| Programmer's notes: | |
| ------------------- | |
| Ext2fs_set_bit(), ext2fs_clear_bit(), and ext2fs_test_bit( have been | |
| changed to take an unsigned int for the bit number. Negative bit | |
| numbers were never allowed (and didn't make any sense), so this should | |
| be a safe change. This is needed to allow safe use of block numbers | |
| greater than or equal to 2**31. | |
| The compile_et program will avoid recreating generated foo_err.c and | |
| foo_err.h files if no changes are necessary. The compile_et program | |
| will also atomically replace these files to avoid a potential parallel | |
| build race problem on SMP systems. (Addresses Sourceforge Bug: | |
| #1157933) | |
| Added a new function to the blkid library, blkid_probe_all_new(), | |
| which only probes newly added disk devices, and change | |
| blkid_find_dev_with_tag() to use this function so that when a | |
| requested tag is not found, devices that were previously not checked | |
| are searched before searching all devices in the system. | |
| Added new functions to the blkid library, blkid_dev_set_search() and | |
| blkid_dev_has_tag(). | |
| E2fsck's problem strings can now use @m and @n as abbrevations for | |
| "multiply-claimed" and "invalid", respectively. | |
| The e2fsprog.pot file now has an explanation of how the @-expansion | |
| and %-expansion works, and strings in e2fsck/problem.c which contain @ | |
| characters now have comments in e2fsprogs.pot with the @-expansion to | |
| make life easier for translators. | |
| Fixed missing return values in the ext2fs library which could cause it | |
| to return random garbage in certain error conditions. | |
| Allow the current time to be overriden via the E2FSCK_TIME environment | |
| variable for use in regression tests. | |
| The test scrpit driver program now exits with a non-zero status if | |
| there any of its test that it ran failed. | |
| Fixed problems with parabuilds on SMP systems. (Addresses Sourceforge | |
| Bug: #1157933) | |
| Fixed "make check" so that it compiles correctly even when e2fsprogs' | |
| header files have not be installed in the system include directories. | |
| (Addresses Sourceforge Bug: #1180572) | |
| Fixed gcc -Wall nits. | |
| E2fsprogs 1.37 (March 21, 2005) | |
| =============================== | |
| Add support for checking the validity of Extended Attributes stored in | |
| inodes to e2fsck. | |
| Add support for dumping the contents of large inodes to debugfs, | |
| including the extended attributes stored in inodes. | |
| Fix mke2fs, e2fsck, debugfs, and the ext2fs_mkdir function so that | |
| when we create a new inode we make sure that the extra information in | |
| the inode (any extra fields in a large inode and any ea-in-inode | |
| information) is initialized correctly. This can take place when | |
| mke2fs creates the root and lost+found directory, when e2fsck creates | |
| a new root inode or a new lost+found directory, and when the user uses | |
| the debugfs write, mknod, or mkdir commands. Otherwise, the newly | |
| create inode could inherit garbage (or old EA information) from a | |
| previously deleted inode. | |
| Fixed a bug in e2fsck so it would notice if a file with an extended | |
| attribute block was exactly 2**32 blocks, such that i_blocks wrapped | |
| to zero. | |
| Added support to filefrag to detect files which are using the new | |
| experimental file extents format, and use the non-ext2 algorithm in | |
| that case. Fixed a bug to avoid reporting a false discontinuity if | |
| there is one or more unallocated blocks at the beginning of a file. | |
| Duplicated a check for noticing whether or not the number of blocks | |
| (given a certain blocksize) is greater than 2**32 when the | |
| BLKGETSIZE64 ioctl is not available to ext2fs_get_device_size(). This | |
| allows mke2fs to automatically use a larger blocksize when creating a | |
| filesystem on a very large device when run on systems that do not | |
| support BLKGETSIZE64. | |
| Fix the I18N build which was broken in e2fsprogs 1.36 because the | |
| build system had been switched to treat the .gmo files as shipped | |
| files (for backwards compatibility with systems that have older GNU | |
| I18N tools installed), but the gen_tarball.in script was still | |
| removing the .gmo files from the official source distribution. | |
| Fixed various Debian packaging issues --- see debian/changelog for | |
| details. (Addresses Debian Bugs ##296769, #299341) | |
| Programmer's notes: | |
| ------------------- | |
| Added new functions to the e2p library which convert between a string | |
| and os_type: e2p_os2string() and e2p_string2os(), and used them to | |
| make the generated binaries more compact. | |
| Fixed a compile-time error on Darwin systems. | |
| Cleaned up the lib/ext2fs Makefile slightly. | |
| E2fsprogs 1.36 (February 4, 2005) | |
| ================================= | |
| All of the patches that were applied to Fedore Core 3's | |
| e2fsprogs-1.35-11.2 have been integrated, although sometimes with a | |
| lot of bug fixes first. Users of Fedora Core 3 are strongly | |
| encouraged to upgrade to e2fsprogs 1.36 as soon as possible. | |
| Add support for filesystem with the online resizing via resize inode | |
| feature. Fixed numerous bugs from the Fedora patches. The Fedora | |
| patches also didn't bother to do any consistency checking on the | |
| resize inode, or add any tests to the regression test suite. The "-R | |
| resize=4g" option to mke2fs was a no-op in the Fedora patches, despite | |
| being listed in mke2fs's usage message. All of these shortcomings | |
| have been corrected. | |
| E2fsck can also also fix filesystems trashed by Fedora's resize2fs | |
| program. In order to do this, the user must run the commands: | |
| debugfs -w /dev/hdXXX -R "features ^resize_inode" | |
| e2fsck -f /dev/hdXXX | |
| Optionally, the ext2prepare command can be used to re-enable online | |
| resizing after the filesystem has been fixed. | |
| The fsck program will now accept an optional filedescriptor argument | |
| to the -C option. (The Fedora version of this patch would sometimes | |
| cause fsck to ignore a parameter on fsck's command line in some rare | |
| cases, sigh.) | |
| Make sure e2fsprogs doesn't write garbage into the reserved portion of | |
| large inodes. | |
| Make sure resize2fs releases the blocks belonging to the old inode | |
| table blocks when moving the inode table. (Addresses Debian Bug: | |
| #290894) | |
| Skip the r_resize_inode test if resize2fs is not compiled (due to | |
| configure --disable-resizer) | |
| E2fsck now checks the summary filesystem accounting information, and | |
| if any of the information is obviously wrong, it will force a full | |
| filesystem check. (Addresses Debian Bug #291571) | |
| Fix e2fsck to not complain when the resize_inode feature is enabled, | |
| s_reserved_gdt_blocks is zero, and there is no DIND block allocated in | |
| the resize inode. | |
| Fix e2fsck to note delete symlinks that contain an extended attribute | |
| after the ext_attr feature flag has been cleared. (Addresses Red Hat | |
| Bugzilla #146284). | |
| Add new utility program, copy_sparse.c, which is very useful | |
| for dealing with large sparse files (such as e2image files). | |
| Add support for jnl_blocks[] for debugfs's set_super_value. | |
| Fix filefrag so that it works correctly with sparse files. | |
| Filefrag -v will print first and last blocks. | |
| Add interpretation of OS Creator values for FreeBSD and Lites in mke2fs | |
| and dumpe2fs. | |
| Add mke2fs support so that it can support filesystems larger than 4TB | |
| automatically, by retrying with a 4k blocksize if the device size is | |
| too big to be expressed using a 1k blocksize. (Addresses Sourceforge | |
| bug #1106631) | |
| Change blkid to test for NTFS first because Windows sometimes doesn't | |
| clear enough of the parition to confuse the probing routines into | |
| thinking the old filesystem type is still valid. (Addresses Debian | |
| Bug #291990) | |
| Add support for swap partition label and uuid's in the blkid library. | |
| Add support to the blkid library to recognize Oracle ASM volumes. | |
| Make blkid -t display all devices that match the specified criteria, | |
| not just the first one, and work more consistently when the blkid | |
| cache file is not available or set to /dev/null. (Addresses Debian | |
| Bug #290530 and #292425) | |
| Badblocks will now correctly display block numbers greater than | |
| 999,999,999 in its progress display. | |
| The tune2fs program will not allow the user from setting a ridiculous | |
| number of reserved blocks which would cause e2fsck to assume the | |
| superblock was corrupt. E2fsck's standards for what is a ridiculous | |
| number of reserved block has also been relaxed to 50% of the blocks in | |
| the filesystem. | |
| The blkid library will return vfat in preference to msdos, and ext3 in | |
| preference to ext2 (if the journalling flag is set) so that mount will | |
| do the right thing. (Addresses Debian bug #287455) | |
| Mke2fs will now use the -E option for extended options; the old -R | |
| (raid options) option is still accepted for backwards compatibility. | |
| Fix a double-free problem in resize2fs. (Red Hat Bugzilla #132707) | |
| Mke2fs will now accept a size in megabytes, gigabytes, and other units | |
| (via "32m" or "4g" on the command line) if the user finds this more | |
| convenient than specifying a block count. | |
| Fix an obscure, hard-to find bug in "e2fsck -S" caused by an inode | |
| cache conherency problem. | |
| Debugfs now supports a new command, set_inode_field, which allows a | |
| user to manually set a specific inode field more conveniently, as well | |
| as set entries in the indirect block map. | |
| Debugfs's set_super_value command has been enhanced so that the user | |
| can set most superblock fields, including the date/time fields and | |
| some of the more newsly added superblock fields. | |
| E2fsprogs programs now accept an offset to be passed to the file | |
| specifiers, via the syntax: "/tmp/test.img?offset=1024". | |
| E2fsprogs programs will now accept blocksizes up to 65536; kernel | |
| support on the x86 doesn't exist for now, but it can be useful on | |
| other architectures with page sizes greater than 4k. There are 2.6 | |
| kernel patches out there which enable this, but they are of this | |
| writing still experimental. | |
| The e2image command now takes the -s option which will scramble | |
| directory entries for raw image files. | |
| Fix a file descriptor leak in the filefrag program. | |
| Make sure e2fsck doesn't crash when /proc/acpi/ac_adapter is not | |
| present. | |
| Fix bug in debugfs where kill_file would lead to errors when deleting | |
| devices and symlinks. (Sourceforge Bugs #954741 and #957244) | |
| Fix bug in the blkid library when detecting the ocfs1 filesystem | |
| Remove obsolete EVMS 1.x and a.out DLL support. | |
| E2fsck will attempt to recover from a journal containing illegal blocks. | |
| Fixed two potential ordering constraint problems in e2fsck which might | |
| cause the filesystem to be corrupted if e2fsck is interrupted during a | |
| (extremely narrow) race window. Thanks to Junfeng Yang from the | |
| Stanford Metacompilation group for pointing this out. | |
| Fixed bug in e2fsck where it would not accurately detect whether or | |
| not the system is running on adaptor if the ACPI device representing | |
| the AC adapter didn't correspond to the what was used on IBM | |
| Thinkpads. | |
| Change e2fsck to accept directories greater than 32MB. | |
| Fix e2fsck so that a checkinterval of zero disables a time-based check | |
| of the filesystem. | |
| Debugfs will check the DEBUGFS_PAGER enviroment variable in preference | |
| to the PAGER environment variable. (Addresses Debian Bug #239547) | |
| Tune2fs will not mark rewrite the superblock if the feature bitmasks | |
| are not modified. | |
| The debugfs program will set the filetype information when creating a | |
| link. | |
| Add debugfs -d option to use a separate source of data blocks when | |
| reading from an e2image file. | |
| Add e2image -I option which allows the e2image metadata to be | |
| installed into a filesystem. | |
| Fixed bug in the badblocks program which caused "done" to always | |
| appear in english even when a translation was available. (Addresses | |
| Debian Bug #252836) | |
| The blkid program has a new option -o which controls the output format | |
| of the blkid program; this is makes blkid more convenient to use in | |
| shell scripts. | |
| Fix a minor bug in uuid library, which was not using the full 14 bits | |
| of clock sequence when generating UUID's. | |
| Fix a Y8.8888K problem in the uuid library. | |
| Logsave now creates a new session id for itself to avoid getting | |
| killed by init whan transitioning between init levels. | |
| Change the licensing of the UUID library to be the 3-clause BSD-style | |
| license; this allows Apple to use the uuid library in Darwin. | |
| Add ocfs and ocfs2 probe support into the blkid library. | |
| Fix a memory and file descriptor leak in the blkid library. | |
| The blkid library will revalidate the device if the system time is | |
| earlier than last verification time of the device, since that | |
| indicates that the system time is probably nottrustworthy. | |
| The blkid library will override the default location of the blkid.tab | |
| file by the BLKID_FILE environment variable, if it is available. | |
| Change the getsize functions to use the BLKGETSIZE64 ioctl on Linux 2.6. | |
| Add various portability fixes for lame new versions of glibc, Darwin | |
| and GNU/KFreeBSD, as well as removing XSI:ism's. (Addresses Debian | |
| Bugs #239934, #264630, #269044, #255589, #289133) | |
| Add support for Windows 9x/NT under Cygwin. | |
| Updated and clarified various man pages. (Addresses Debian Bugs #236383, | |
| #241940, #238741, #242995, #256669, #268148, #256760, #273679) | |
| Updated and fixed translations. (Addresses Debian bugs #244105, #262836) | |
| Update the rpm spec files so that it works better with Fedora core 2 | |
| and RH9. | |
| Fixed various Debian packaging issues (see debian/changelog). In | |
| particular, fixed the Debian initrd scripts. (#241183, #248050, | |
| #253595, #247775) | |
| Programmer's notes: | |
| ------------------- | |
| Fixed various gcc -Wall warnings. | |
| The uuid library now has new functions uuid_unparse_upper() and | |
| uuid_unparse_lower() which forces the case of the hex digits to be | |
| upper case, or lower case. | |
| The build process has been speeded up by enhancing the subst program | |
| to update the modtime on the generated files even when the generated | |
| file hasn't changed. | |
| The uuid library now uses C99 stdint.h types instead of custom types. | |
| Updated config.guess and config.sub with newer versions from the FSF. | |
| Removed out of date .cvsignore files from the source distribution. | |
| The ext2fs_unlink() function will return an error if both the name and | |
| inode number are unspecified, to avoid doing something surprising | |
| (such as unconditionally deleting the first directory entry). | |
| Directory entries are now deleted by coalescing them with the previous | |
| directory entry if possible, to avoid directory fragmentation. This | |
| is not an issue with the e2fsprogs suite, but may be a problem for | |
| some of the users of libext2fs, such as e2tools. | |
| Add support for version numbers of the form "1.36-rc1". | |
| Fix build of mke2fs.static. | |
| Add basic ext2fs library support for large (EA in inode) inodes. | |
| The test_io mechanism can now abort after n reads or writes to a | |
| particular block. The block is specified by TEST_IO_BLOCK environment | |
| variable, and the read/write count by the TEST_IO_READ_ABORT and | |
| TEST_IO_WRITE_ABORT environment variables. The block data is now only | |
| dumped if the 0x10 bit is set in TEST_IO_FLAGS. | |
| UUID_DEFINE() in the uuid library now creates a static variable, with | |
| __attribute__ ((unused)) if we are using GCC, so that UUID_DEFINE can | |
| be used in header files. | |
| Add support for the install-strip and install-shlibs-strip targets, as | |
| suggested by the GNU coding guielines. "make install" no longer | |
| strips the binaries which are installed. | |
| Remove support for the --enable-old-bitops configure option which was | |
| only for very old sparc systems. | |
| Remove support for --enable-clear-htree; this was only needed during | |
| the early development of the htree patch. | |
| Use Linux-kernel-style makefile output so it is easier to see compiler | |
| warnings. | |
| Update gettext files to version 0.14.1. | |
| Update to use autoconf 2.5x. | |
| Improved support for compiling e2fsprogs under dietlibc. | |
| Make e2fsprogs portable to Solaris and FreeBSD systems. | |
| Add blkid_verify(), blkid_get_library_version(), and | |
| blkid_parse_version_string() functions to the blkid library. | |
| Add pkg-config files for e2fsprogs's libraries. | |
| Fix "make uninstall" to so that it removes everything that is installed. | |
| Add a configure --enable-maintainer-mode option which enables the | |
| makefile rules to rebuild the configure script from configure.in, and | |
| to reubuild the .gmo files in po directory. | |
| Drop the sparc assembly bitwise operations; it's less efficient | |
| than the GCC 3.4 compile code and triggers compiler warnings on | |
| sparc64. Thanks to Matthias Andree for his analysis and suggestions. | |
| (Addresses Debian Bug #232326) | |
| E2fsprogs 1.35 (February 28, 2004) | |
| ================================== | |
| E2fsck has a new -k option, which in conjunction with the -c options, | |
| preserves the existing badblocks list. | |
| Cleaned up e2fsck's preen-mode messages during the passes 1b, 1c, and 1d. | |
| E2fsprogs will now deal correctly with symlinks that contain | |
| extended attribute information, which can be created using SE Linux. | |
| (Addresses Debian Bug #232328) | |
| Remove a double longjump into an invalid stack frame bug in e2fsck. | |
| (This was during an abort sequence, which normally worked on Linux and | |
| caused a core dump on other operating systems.) | |
| Fix NLS bug in e2fsck, by avoiding trying to expand an empty string | |
| (the NLS library will replace "" with the .po header information). | |
| Fix a bug in mke2fs which caused -T largefile or -T largefile4 to core | |
| dump due to a division by zero error. (Addresses Debian bug #207082) | |
| Fixed a bug in e2fsck which caused it to incorrectly fix a filesystem | |
| when reconnecting a directory requires creating a lost+found | |
| directory. (Addresses Debian bug #219640). | |
| Fixed a bug where e2fsck would bomb out if a journal needed to be | |
| replayed when using an alternate superblock. | |
| E2fsck will give an extra grace period before actually forcing a check | |
| if the laptop is running on battery. The next time fsck runs while | |
| the system is on the AC mains, or after the grace period is exceeded, | |
| the filesystem will be checked. (Addresses Debian bug #205177) | |
| E2fsck will inform the user when there are 5 or fewer mounts before a | |
| filesystem check will be forced. (Addresses Debian bug #157194) | |
| Fix e2fsck's handling of corrupted indirect blocks in the bad block. | |
| We now correctly handle the case where there is an overlap between a | |
| block group descriptor or a superblock and a bad block indirect block. | |
| In the case where the indirect block is corrupted, we now suggest | |
| "e2fsck -c". | |
| Fix byte swap bugs in e2fsck that caused the journal backup location | |
| in the superblock and symlinks created by SE Linux to be cleared | |
| by e2fsck on big-endian machines. (Addresses Debian bug #228723) | |
| E2fsck -c now replaces the current list of bad blocks with the ones | |
| found by badblocks. | |
| Fix bugs in e2fsck and tune2fs which could cause a core dump if a | |
| non-existent LABEL or UUID specifier is to e2fsck or tune2fs. | |
| Fix a potential bug in e2fsck which could cause it to core dump when | |
| trying to print the location of the backup superblock. | |
| Protect against a potential core dump in e2fsck when printing a | |
| message about backup superblocks. | |
| Add support for backing up the journal inode location in the | |
| superblock. E2fsck will automatically save the journal information in | |
| the superblock if it is not there already, and will use it if the | |
| journal inode appears to be corrupted. ext2fs_add_journal_inode() | |
| will also save the backup information, so that new filesystems created | |
| by mke2fs and filesystems that have journals added via tune2fs will | |
| also have journal location written to the superblock as well. | |
| Debugfs's logdump command has been enhanced so that it can use the | |
| journal information in the superblock. | |
| E2fsck will now update all superblocks when moving the journal inode. | |
| Shrink the size of the e2fsck executable by moving some initialized | |
| variables to the BSS segment. | |
| E2fsck will avoid printing the ^A and ^B characters which bracket the | |
| progress bar when stdout and stdin are a tty device instead of a pipe | |
| to another program. (Addresses Debian bug #204137) | |
| Debugfs's mkdir command will automatically expand the directory if | |
| necessary. (Addresses Debian Bug: #217892) | |
| Fixed a bug in debugfs so that copying a file from /dev/null uses the | |
| correct mode bits. (Addresses Debian Bug: #217456) | |
| If the environment variables DEBUFS_PAGER and PAGER are not set, | |
| debugfs now searches for the appropriate pager to use, beginning with | |
| /usr/bin/pager, and then falling back to 'more' and 'less'. | |
| (Addresses Debian bug #221977) | |
| Debugfs will now support 2.6 device numbers where the major or minor | |
| number may be larger than 255. (Addresses Sourceforge bug #865289) | |
| Fix debugging printf in resize2fs. (Addresses Debian Bug #271605) | |
| Chattr now stops processing options when it sees '--'. (Addresses | |
| Debian bug #225188) | |
| Fix regression tests so they work correctly when e2fsprogs is compiled | |
| with configure --disable-htree. | |
| Fix bug in uuid library when there is no network card and the library | |
| is generating a time-based uuid. The random MAC address was not | |
| correctly generated to be a multicast address. | |
| Add compile_et extensions from Heimdall that were missed the first time | |
| around. | |
| Fix bug in badblocks when using O_DIRECT; we need to make sure that | |
| we're reading from an offset which is page aligned. For read-only and | |
| read-write tests, we try to recover after an error so that we can | |
| continue reading on page-aligned boundaries. (Addresses Debian Bug | |
| #203713) | |
| Badblocks now checks 64 blocks at a time instead of 16. (Addresses | |
| Debian bug #232240) | |
| Updated and clarified various man pages. (Addresses Debian Bug | |
| #206845, #222606, #214920, #232406) | |
| Updated and fixed translations. (Addresses Debian bugs #200086, #214633) | |
| Fixed various Debian packaging issues (see debian/changelog). | |
| Programmer's notes: | |
| ------------------- | |
| Fixed a build problem so that e2fsprogs would compile with the | |
| --enable-profile option to configure selected. (Addresses Sourceforge | |
| bug #811408) | |
| Fixed C++ problems with the ext2fs.h header. (Addresses Red Hat | |
| Bugzilla Bug #112448) | |
| Centralize code which calculates the location of the superblock | |
| and block group descriptors so that it is in a single library routine. | |
| Added two new functions, ext2fs_file_open2() and | |
| ext2fs_inode_io_intern2() which take a pointer to an inode structure. | |
| Fix compile_et to output the correct prototype for | |
| initialize_xxx_err_table_r() in the header file. (Addresses Debian | |
| bug #204332) | |
| In the lib/et makefile, make sure com_err.info is deleted on "make clean". | |
| Fix 64-bit warnings in e2fsprogs pass1b by using inttypes.h if | |
| present. This is for when we try stuffing an int into void * pointer. | |
| Fix type-punning which can cause gcc 3.x to miscompile code by getting | |
| confused about pointer aliasing. ext2fs_getmem(), ext2fs_free_mem(), | |
| and ext2fs_resize_mem() all now take a 'void *' instead of a 'void | |
| **'. The EVMS code uses an ugly union approach since we don't want to | |
| modify the EVMS interfaces. | |
| Make sure all Makefiles use $(MAKE) rather than hardcoded "make", to | |
| aid build process on systems can use invoke GNU make as "gmake". | |
| Added regression testing for mke2fs. | |
| Fixed gcc -Wall nitpicks. | |
| Fixed various compiler warnings. | |
| Add portability fixes for FreeBSD and for using fsctl under Darwin to | |
| support ext2 ioctl's. | |
| E2fsprogs 1.34 (July 25, 2003) | |
| =============================== | |
| Fixed a bug introduced in E2fsprogs 1.30 which caused fsck to spin in | |
| a tight loop while waiting for a child fsck to exit in some cases. | |
| This burns CPU times which slows down the low-level filesystem check. | |
| Added code to mke2fs to assure that the default block size for a | |
| filesystem is at least as big as the sector size of the device, if it | |
| can be determined. | |
| Changed mke2fs and resize2fs to round the default size of a filesystem | |
| to be an even multiple of the VM pagesize in order to avoid a Linux | |
| kernel bug introduced when the storage of the buffer cache was moved | |
| into the page cache. | |
| Mke2fs will warn the user when creating a filesystem with journaling | |
| and a blocksize greater than 4096. (Addresses Debian bug #193773) | |
| Fixed a bug in resize2fs which caused it to fail on filesystems with a | |
| non-empty bad block list. Resize2fs now discards any blocks on the | |
| badblock list which are no longer part of the filesystem as the result | |
| of a filesystem shrink. (Note: this means that shrinking and then | |
| enlarging a filesystem is no longer a reversible operation; | |
| information about bad blocks in the part of the filesystem which is to | |
| be chopped off will be lost.) | |
| Changed resize2fs so the user can use prefixes to specify the units of | |
| the new filesystem size (sectors, kilobytes, megabytes, or gigabytes), | |
| and to make the error and informational messages explicitly display | |
| the blocksize used by the filesystem, in order to avoid confusion. | |
| (Addresses Debian bug: #189814) | |
| Added a new debugfs command, dump_unused, which dumps the contents of | |
| all unused blocks to stdout. (Useful as an emergency try-to-find | |
| deleted data command.) | |
| Added a new debugfs command, imap, which prints the location of a | |
| specified inode in the inode table. | |
| Fixed a bug in the badblocks program which caused it to use one bit of | |
| randomness in its non-destructive read/write test, instead of using a | |
| full 8 bits of randomness. | |
| Added a new option (-t) to badblocks, which allows the user to control | |
| the test pattern(s) used when checking a disk. | |
| The blkid probe function now more correctly detects UDF filesystems. | |
| Fixed a bug in the blkid library which caused it to not update its | |
| cache if a filesystem changes from having a label to not having a | |
| label. | |
| Fixed a bug in the blkid library wihch could avoid an infinite loop | |
| in blkid_find_dev_with_tag() if /proc is not mounted and there the | |
| /etc/blkid.tab file has not yet been created. | |
| Fixed the badblocks program so that the destructive read/write test | |
| honors the -c option, and to use O_DIRECT when possible to avoid | |
| thrashing the system block buffer cache. | |
| Fixed various NLS issues. | |
| - Added Czech and Swedish translations | |
| - Removed testing NYC translation | |
| - Fixed NLS support for message abbrevations in e2fsck | |
| - Remove de-utf.po, since we shouldn't have two versions using different | |
| charset encodings. | |
| - Used ngettext() (abbreivated with the macro P_(str1, str2, n)) to | |
| simplify the statistics reporting in e2fsck. | |
| Changed configure.in so that its defaults for *BSD systems no longer | |
| build an fsck wrapper, and not to install in /usr/local by default. | |
| Fixed some minor spelling errors/typo's in e2fsck and the configure | |
| script. | |
| Fixed various Debian packaging issues (see debian/changelog). | |
| Updated and clarified man pages. (Addresses Debian Bug #195616) | |
| Programmer's notes: | |
| ------------------- | |
| Fix gcc -Wall nitpicks. | |
| Updated gettext implementation used by e2fsprogs to 0.11.5, and enable | |
| NLS support by default. (Added partial workaround for gettext/Darwin | |
| incompatibility problems.) | |
| Added full MIT KRB5 and Himdall compaibility support to the com_err | |
| library and the compile_et program. (Addresses Debian bug #191900) | |
| Added the blkid_known_fstype() function to the blkid library, which | |
| returns true if it is passed a filesystem type which is recognized by | |
| the blkid probing functions. | |
| Improved the documentation for the blkid library. | |
| Added the ext2fs_get_device_sectsize() function the the ext2fs library, which | |
| returns the hardware sector size of a device, if it is available. | |
| Added a dependency in the blkid library's .so file to the uuid | |
| library, since the former uses the latter. (Addresses Debian bug | |
| #194094) | |
| Added --with-diet-libc and --disable-evms to the configure script. | |
| Fixed a minor memory leak in the badblocks program. | |
| Fixed a portability problem in tune2fs --- not all systems have strptime(). | |
| Fixed a portability problem in debugfs with the use of getopt() more | |
| than once. Old-style BSD, new-style BSD, and Linux C libraries all do | |
| things differently. | |
| Add support Windows support to ext2fs_get_device_size(). | |
| Added (normally disabled) debugging code to the Unix I/O manager which | |
| causes it to disable all userspace caching if the NO_IO_CACHE is | |
| defined. | |
| Changed the test I/O manager so it can always be linked into e2fsck, | |
| mke2fs, and tune2fs if enabled via --enable-test-io-debug to the | |
| configure script. The test I/O manager will only print any debugging | |
| information if the TEST_IO_FLAGS or TEST_IO_BLOCK environment | |
| variables are set, which specifies which I/O operations are logged and | |
| a block number to watch, respectively. The log messages are sent to | |
| stderr by default, unless a filename is specified via the | |
| TEST_IO_LOGFILE environment variable. | |
| E2fsprogs 1.33 (April 21, 2003) | |
| =============================== | |
| Added a new utility program, logsave, which captures the output of a | |
| command in a log file, even if the containing directory hasn't been | |
| mounted yet (in which case the it saves the output in memory until it | |
| can write out the logfile). This is useful for capturing the | |
| output of fsck during the boot sequence. | |
| Fixed some portability problems that were causing problems under | |
| the Cygwin32 environment. | |
| Mke2fs now interprets a negative number to the -b option as a minimum | |
| block size. | |
| Fixed a bug in mke2fs which was incorrectly checking the argument to | |
| the -g option if the default block size was used. (Addresses Debian | |
| bug #188319) | |
| Fsck now explicitly ignores tmpfs and devpts, and it will complain if | |
| it can not find filesystem checkers for jfs, reseirfs, and xfs. | |
| E2fsck now updates the global free block and inode counters from the | |
| block group specific counters quietly. This is needed for an | |
| experimental patch which eliminates locking the entire filesystem when | |
| allocating blocks or inodes; if the filesystem is not unmounted | |
| cleanly, the global counts may not be accurate. | |
| Imported bug fixes to the EVMS plugin from the EVMS 2.0 tree. (EVMS | |
| 2.0 is not yet supported; this only pulled in the bug fixes: fixed | |
| possible hangs caused by bugs in calling waitpid, and not setting the | |
| pipe to non-blocking mode; also fixed a file descriptor leak; made | |
| sure all functions call log entry/exit functions.) | |
| Badblocks now flushes its output file as bad blocks are discovered. | |
| The uuid library is now more paranoid about assuming the correctness | |
| of the /dev/random device; it mixes in a stream of bytes from | |
| random/srandom, just in case. | |
| Update Debian files to reflect the fact that I am now the Debian | |
| maintainer of e2fsprogs. Other various Debian-specific packaging | |
| cleanups. | |
| Move the source tarball generation functions from the top-level | |
| makefile to the util/gen-tarball script. | |
| Updated the Turkish .po translation file. | |
| Added Heimdal and MIT krb5 extensions to the com_err library to make | |
| it more compatible with com_err libraries from those distributions. | |
| Changed dumpe2fs to always display the superblock fields relating to | |
| the journalling and/or directory indexing feature even if those | |
| features are not enabled. | |
| Updated and clarify copyright statement vis-a-vis alpha releases of | |
| e2fsprogs. | |
| The ss library will now try to dynamically link to the readline | |
| library and use it if it is present in the system. This means that | |
| the debugfs program now has line editing and history features. The | |
| SS_READLINE_PATH environment variable is used to find a readline or | |
| readline-compatible library. | |
| E2fsck now finds most duplicate filenames (all when rebuilding all | |
| directories via the -D option) and offers to delete or rename | |
| duplicate filenames/directory entries. (Addresses Debian Bug #176814). | |
| Fix bug in e2image. When writing out a raw image file, include data | |
| blocks from symlinks that do not store the symlink within the inode. | |
| Fix bug in resize2fs which incorrectly moved the block and inode | |
| bitmaps for sparse superblock filesystems and incorrectly marked | |
| blocks as in use. (Addresses Debian bug #174766) | |
| Added a new shared library, the blkid library, which efficiently | |
| allows fsck, mke2fs, e2fsck, and tune2fs to be able to look up LABEL | |
| and UUID filesystem specifiers without needing to search all of the | |
| devices in the system. Instead, the device is looked up in a cache | |
| file, and then verified to make sure the blkid cache is correct. | |
| Tune2fs and e2label will accept LABEL=xxx and UID=yyy specifiers for | |
| the device name, using the blkid library. (Addresses Debian bugs | |
| #166048, #179671) | |
| Fsck now supports backslash escapes in /etc/fstab so that \040 can be | |
| used for spaces in device labels. | |
| Removed 32-bit limitations for debugfs's dump command. | |
| If the user specifies a large number of inodes, Mke2fs will | |
| automatically adjust the number of blocks per group to find a valid | |
| set of filesystem parameters. | |
| Add workaround to detect broken MD devices where when some of the | |
| underlying devices are marked read-only, writes to the MD device are | |
| silently dropped. E2fsck will detect if there is an attempt to run | |
| the journal twice, and abort with an error if this is the case. | |
| (Addresses IBM Bugzilla bug #1226) | |
| E2fsck will print an error if more than one of the -p/-a, -n or -y | |
| options are specified. | |
| E2fsck will fix HTREE corruptions in preen mode, without stopping the | |
| boot process. This is needed because the 2.4 ext2 filesystem | |
| accidentally had the INDEX_FL backwards compatibility code removed. | |
| Mke2fs no longer creates filesystems with the dir_index flag set by | |
| default; the user has to specifically request it. | |
| Update and clarified various man pages. (Addresses Debian bugs | |
| #173612, #175233, #175113, and #170497, #185945, #188318) | |
| Created man page for the mk_cmds program (from the libss library). | |
| Programmer's notes: | |
| ------------------- | |
| Fix various gcc -Wall nits. | |
| Fixed a lot of portability problems that caused e2fsprogs not to build | |
| successfully under Solaris and Apple/Darwin. | |
| Fixed a Makefile dependency to allow building e2fsprogs using parallel | |
| make jobs. | |
| Changes to create a subset distribution which consists only of the | |
| et, ss, uuid, and blkid libraries. The configure script and top-level | |
| makefile were changed to support working with a subset distribution. | |
| Removed EXT2_FEATURE_RO_COMPAT_BTREE_DIR mention of since it's not | |
| actually used, and might people who are looking for | |
| EXT2_FEATURE_COMPAT_DIR_INDEX, which is in use. | |
| Updated debian files to fix a number of Lintian warnings. | |
| Updated config.guess and config.sub with newer versions from the FSF. | |
| Removed unnecessary libraries from being linked into the fsck, lsattr, | |
| chattr, and blkid executables. | |
| E2fsprogs 1.32 (Nomvember 9, 2002) | |
| ================================== | |
| Fixed a bug in the Unix I/O routines which caused needless writebacks | |
| of clean blocks from the unix_io cache (they were erroneously marked | |
| as being dirty, so they were getting written back to disk before | |
| getting evicted from the disk cache). This was harmless, but it | |
| significantly slowed down e2fsck. | |
| Made some other minor optimizations to the Unix I/O routines to save a | |
| small amount of CPU time. | |
| Updated internationalization files. | |
| E2fsprogs 1.31 (Nomvember 8, 2002) | |
| ================================== | |
| Update EVMS ext2fsim plugin with EVMS 1.2. (We still support | |
| compiling the fsim plugin with EVMS 1.0 and 1.1.) Add better error | |
| handling for child process that die unexpectly. Add a hack to force | |
| mkfs to create filesystems that won't cause problems with hardware | |
| that has 2k or 4k minimum blocksize requirements. Read from child | |
| processes in non-blocking mode, so that the GUI continues to update. | |
| Fix e2fsck so that it returns the appropriate exit code when the root | |
| filesystem has been changed, so that system's rc scripts will be told that | |
| the system needs to be rebooted. | |
| Fix a bug in ext2fs_flush/ext2fs_close; when the MASTER_SB_ONLY flag | |
| was set, some of the descriptor blocks that should have been written | |
| out were getting skipped. | |
| Changed e2fsck to force out changes to the backup copies of the | |
| superblock and block group descriptors when important changes are made | |
| to those data structures. | |
| Fix a bug where e2fsck could erroneously mark a filesystem as being | |
| clean if a check of dirty filesystem is interrupted with a ^C. (Bug | |
| introduced in e2fsprogs 1.28.) | |
| If journal debuging is enabled using --enable-jbd-debug, the debugging | |
| level is now set via the E2FSCK_JBD_DEBUG environment variable. | |
| If byteswapping support is disabled using configure --disable-swapfs, | |
| skip the tests which depend on byte-swapping, so that "make check" | |
| won't bomb out. | |
| Lshattr will now display the indexed directory flag. Also, some of | |
| the more esoteric compression flags are supressed unless compression | |
| support has been enabled. | |
| Update man pages. | |
| E2fsprogs 1.30 (October 31, 2002) | |
| ================================= | |
| When resizing a filesystem, and inodes need to moved, resize2fs will | |
| update the inode's ctime field, and the mtime field of the containing | |
| directories, so that incremental backups using dump/restore will work | |
| correctly. | |
| In order to avoid spurious errors, e2fsck wil check the last | |
| superblock write time to determine whether or not it can safely use | |
| the LOW_DTIME checks to determine if there are inodes on the orphan | |
| inode linked list that had somehow gotten disconnected. (Addresses | |
| Sourceforge bug #620980) | |
| Partition in /proc/partitions that being with the string "lvm" are | |
| considered real partitions even if they do not end with a number. | |
| Fixed a bug in the the uuid generation function, where if /dev/urandom | |
| is not present, but /dev/random is, and there isn't sufficient | |
| entropy, the get_random_byte function could spin a loop forever. | |
| E2fsck, mke2fs, etc. will now reliably notice when image files are | |
| mounted using the loopback interface. (Addresses Sourceforge bug | |
| #619119) | |
| When flushing buffers (as is done by badblocks, for example) check to | |
| see if the BLKFLSBUF ioctl succeeds, and if so, avoid using the | |
| FDFLUSH ioctl which causes the MD device driver which causes confusing | |
| syslog messages about obselete ioctl messages. (Addresses Sourceforge | |
| bug #545832). | |
| Debugfs's write command now checks to see if the destination filename | |
| exists before creating it. (Addresses Sourceforge bug #478195.) | |
| When installing man pages, search for compressed man pages using all | |
| commonly used compression extensions (i.e., .Z, .gz, .bz2, etc.) | |
| Fixed a bug in fsck where multiple filesystems specified on the | |
| command were not being checked in parallel due to a logic bug | |
| introduced to support the FSCK_MAX_INST environment variable. | |
| We have added a new superblock field, s_mkfs_time, which indicates | |
| when a filesystem was created. It is set via mke2fs, and printed out | |
| by dumpe2fs, but is not actually touched by the kernel. | |
| Dumpe2fs has been made more robust by not aborting if there is an | |
| error reading the block/inode bitmaps; instead it will still print out | |
| the location of the block/inode bitmaps and inode table. | |
| Add support for the an alternative block group descriptor layout which | |
| allows for on-line resizing without needing to prepare the filesystem | |
| in advance. (This is the incomat feature flag meta_bg.) | |
| Add support for storing default mount options in the superblock, so | |
| that the filesystem can be mounted with specific mount options without | |
| needing to specify them on the mount command line or in the /etc/fstab | |
| file. | |
| Add support for a new inode flag, which is to be used for indicating | |
| the top of directory hierarchies for the Orlov block allocator. | |
| Fix e2fsck so that if it creates the lost+found directory, it does so | |
| with the more apporpriate permissions of 0700. Also change | |
| mklost+found so that it also creates the directory 0700. | |
| Fixed format bug in e2fsck if NLS is in use. | |
| Add a German translation for e2fsprogs's NLS support. | |
| Fixed e2fsck so that it more handles BAD_BLOCK_IN_INODE_TABLE even at | |
| the beginning of the inode table. This won't matter much, since if | |
| there is a bad block at the beginning of the inode table, the root | |
| directory won't be available. But at least e2fsck won't crash in this | |
| case. | |
| Fixed endian problems in the htree code for e2fsck and debugfs. | |
| When byte-swapping a filesystem on a PPC architecture, byte-swap the | |
| bitmaps since the historical big-endian ext2 variant had byte-swapped | |
| bitmaps, and the ext2fs library assumes this. This fixes the | |
| regression test suite on PPC machines. | |
| Fix e2image so that it handles a bad block in the inode table | |
| appropriately. | |
| E2fsck now uses a more sophisticated algorithm to salvage corrupted | |
| directories that recovers more information in the corrupted directory | |
| block. | |
| E2fsck now performs additional consistency checks on indexed (HTREE) | |
| directories. | |
| Fix bug where efsck might get confused about whether a completely | |
| empty directory block is an empty leaf block or an interior htree | |
| node. This could cause e2fsck to get confused into think that a valid | |
| indexed directory was corrupted. | |
| E2fsck no longer creates an empty directory entry at the end of a | |
| directory block when optimizing a directory. This would cause some | |
| earlier versions of the dxdir kernel code to corrupt the directory | |
| when attempting to split a node containing an empty directory entry. | |
| E2fsck could sometimes in rare circumstances leave the indexed flag | |
| set after a small directory was optimized by compressing it instead of | |
| indexing it. (This should never happen in real life, since | |
| directories that small wouldn't have been indexed, but better safe | |
| than sorry.) | |
| E2fsck now only updates the master superblock in all cases. This | |
| slightly shortens its run time. | |
| Ext2ed can deal with directory entries of length 0; previously it | |
| would get stuck in an infinite loop. | |
| Fsck now has support for reiserfs volumes when parsing LABEL= and UUID= | |
| specifiers. (Sourceforge patch #613447) | |
| Badblocks will now work correctly on read-only devices such as | |
| CD-ROM's. (Sourceforge patch #600451) | |
| Updated and clarified man pages. (Addresses Debian bug #167108) | |
| E2fsprogs 1.29 (September 24, 2002) | |
| =================================== | |
| Fixed a bug in e2fsck which could corrupt a directory when optimizing | |
| it (via the -D option) or rebuiliding the hash tree index with a 1 in | |
| 512 probability, due to a fence post error. | |
| Fixed a bug in the LVM support code which caused LABEL='xxx' not to | |
| work correctly. | |
| Mke2fs now enables the directory indexing flag by default. (Since | |
| this is a compatible feature flag, it's safe to do so.) | |
| Tune2fs will support setting the directory indexing feature flag. It | |
| will automatically set up the default hash algorithm and hash seed | |
| fields in the superblock. | |
| If the bone-headed user enters the root filesystem twice in | |
| /etc/fstab, the -R option which skips the root filesystem will skip | |
| all of them. (Addresses Debian bug #159423). Note! This is not a | |
| precedent for dealing intelligently with any other kind of doubled | |
| entry in /etc/fstab! | |
| Programmer's notes: | |
| ------------------- | |
| Removed perror declaration in lib/et/internal.h. All modern systems | |
| can be expected to define perror() these days. Besides, the lib/et | |
| code wasn't using perror at all anyway. :-) | |
| E2fsprogs 1.28 (August 31, 2002) | |
| ================================ | |
| Add support for the Hashed-Tree Directory Indexing to e2fsck. Support | |
| for setting the htree flag is not included yet, although it can be | |
| manually turned on via the debugfs program. | |
| Clarified e2fsck error message which is printed when it cannot find | |
| sufficient contiguous block when relcating filesystem metadata. | |
| Added support for building an EVMS plugin module for ext2/3. This | |
| module is substantially the same as the EVMS module shipping with EVMS | |
| 1.1, with one or two bugfixes. E2fsprogs can also build this plugin | |
| for use with EVMS 1.0 (which did not include the ext2 plugin module), | |
| if the configure --enable-old-evms flag is given. | |
| Fsck will search through EVMS volumes when trying to resolve | |
| filesystem specifications such as LABEL=xxx or UUID=xxx. | |
| Added a new utility program, /sbin/findfs, which will return | |
| filesystem specifications such as LABEL=xxx or UUID=xxx, and prints | |
| the device name. | |
| Update and clarified various man pages. (addresses Debian Bug #145044, | |
| #146437, #131350, #151990, #144621, #141938) | |
| If there are no filesystems specified on fsck's command line, fsck now | |
| treat that as if the -As options were given. Previously it would | |
| simply do nothing. (Addresses Debian Bug #153102) | |
| Mke2fs no longer treats a failure to be able to clear the MD signature | |
| at the end of the filesystem as a fatal error. (Addresses Debian Bug | |
| #155007) | |
| The e2p library functions (which are used by lsattr and chattr) now | |
| double check to make sure the file is a regular file or directory | |
| before attempting to use the ext2 ioctls. Some device drivers | |
| unfortunately respond to the ext2 ioctl's with unknown behaviour. | |
| (Addresses Debian Bug #152029). | |
| The extended attribute handling has been updated to correspond with | |
| the latest V2 bestbits ACL code. | |
| Fixed bug in e2fsck which caused it to not clear the dtime field when | |
| processing truncated inodes on the orphan list. This could cause data | |
| loss(!) if a filesystem is rebooted before a truncate has been | |
| committed. | |
| E2fsck now uses red/black trees in pass1b, which removes some O(n**2) | |
| algorithms. This makes e2fsck much faster in the case of severely | |
| corrupted filesystems where a large number of blocks are claimed by a | |
| large number of inodes. (Thanks to the 2.5 IDE device driver for | |
| inspiring this work.) | |
| Resize2fs has been significantly sped up when shrinking and expanding | |
| a filesystem by a very small number of blocks (for example, when EVMS | |
| is converting a partition to be an EVMS legacy volume). | |
| Added a new option to e2fsck, -D, which will optimize or compress all | |
| of the directories in the filesystem. | |
| E2fsck now catches SIGINT and SIGTERM to make sure it will can | |
| properly clean up and only exit at safe points. Fsck will pass | |
| SIGINT/SIGTERM to its child processes, and wait until they have all | |
| exited before it exits. | |
| The uuid parsing code in the uuid library now properly complains when | |
| an illegally formated uuid is presented to it. (Addresses Debian bug | |
| #152891) | |
| Restrict use of the 2.4 setrlimit ABI f*ckup to kernels between 2.4.10 | |
| and 2.4.17, since the workaround can cause problems when using a 2.4 | |
| kernel with an old version of glibc built with the 2.2 headers. | |
| Fixed a bug in mke2fs where it wasn't properly clearing the initial | |
| superblock used by other filesystems. (Addresses Debian bug #147256.) | |
| Added support for the synchronous directory feature written by Andrew | |
| Morton. | |
| The debugfs program can delete directories using the rmdir command. | |
| Add support for 8k and 16k filesystems (for systems with page sizes | |
| that are greater or equal to 8k or 16k, respectively). Note that | |
| these filesystems can not be mounted on x86 systems, or other systems | |
| with only 4k page sizes, due to limitations in the current Linux VM | |
| code. | |
| Resize2fs requires that the filesystem state be valid and have no | |
| errors; otherwise, e2fsck -f must be run first. (Previously it simply | |
| required that the last fsck time be greater than the last mount time.) | |
| Configure now defaults the man pages directory to /usr/share/man on | |
| Linux systems. | |
| E2fsck now offers to truncate inodes which contain too many blocks (so | |
| that i_blocks would overflow. Also fixed handling of large sparse | |
| files. | |
| E2fsck now more completely checks for symlink validity, including | |
| requiring NULL termination and length checks. | |
| E2fsck will offer to try forcing a disk write to remap a bad block | |
| after finding a read error when reading a filesystem metadata block. | |
| Fixed a bug in debugfs which caused the -b and -s options to crash | |
| debugfs, as well as breaking the testb, setb, and clearb functions. | |
| Added a bmap command to debugfs which calculates the logical to | |
| physical block mapping for a particular inode. | |
| Fixed a bug in code which checked to see if a device was mounted which | |
| sometimes (rarely) failed in the case of a plain file. | |
| Fixed a bug in resize2fs where when it reported an error, it would | |
| print a message erroneously indicating that the filesystem had been | |
| resized before it aborted. | |
| When resizing a plain file which is smaller than the requested size, | |
| resize2fs will attempt to extended the file so that programs like | |
| e2fsck will not complain that the file is too small. | |
| Resize2fs will print the actual new size of the filesystem when it is | |
| finished resizing. | |
| Fixed a bug in debugfs where "ls -l" would report incorrectl file type | |
| information on big-endian systems. | |
| Programmer's notes: | |
| ------------------- | |
| Fixed collisions with C++ reserved words. | |
| Added portability fixes for building e2fsprogs on the HURD and AIX. | |
| Added the ext2ed program for creation of test cases. (ext2ed has many | |
| limitations and bugs which make it unsuitable for production use.) | |
| The ext2fs_read_dir_block2 and ext2fs_write_dir_block now take a new | |
| flag, EXT2_DIRBLOCK_V2_STRUCT, which will will reverse when the | |
| name_len field is byte swampped on big-endian machines, since in the | |
| V2 structure, name_len is a char field which is doesn't need to be | |
| byte swapped --- except if an old-style kernel had byte-swapped the | |
| name_len field as part of the V1 structure. | |
| E2fsprogs 1.27 (March 8, 2002) | |
| ============================== | |
| The warning messages for mke2fs now go to standard error. | |
| Fixed to make sure "make check" runs all of the test programs with | |
| LD_LIBRARY_PATH set, so that we test the libraries in the build tree. | |
| The mke2fs program checks the boot sector for the BSD disk label, and | |
| avoids erasing it if it is there. | |
| Fixed a bug in e2fsck which caused it to core dump if the journal | |
| inode was missing when it was supposed to be there. | |
| E2fsck now prints ranges in pass 5 when printing deltas for the block | |
| and inode bitmaps. | |
| Debugfs's "ls -l" command now will print out the file type information | |
| in the directory entry. | |
| Create man pages and hard links for fsck.ext3 and mkfs.ext3. If | |
| mke2fs is invoked as mkfs.ext3, create the filesystem with a journal. | |
| Debugfs can now examine the experimental directory indexing | |
| information. | |
| Fixed bug in debugfs which caused it to core dump if modify_inode is | |
| called without an open filesystem. | |
| The debugfs lsdel command now runs its output through a pager first. | |
| When installing manual pages, remove the compressed manual pages first. | |
| Synchronized with Debian's packaging information for e2fsprogs-1.26-1. | |
| Fix the 2.4 resource limitation workaround introduced in 1.26 which | |
| actually broke things on mips32, sparc32, and Alpha platforms. | |
| Updated the I18N code so that calls to setlocate(LC_CTYPE, 0) are made | |
| (which is required by the newer libintl libraries). | |
| Programmer's notes: | |
| ------------------- | |
| Fixed various gcc -Wall complaints. | |
| Fixed a few memory leaks in the e2fsck journaling code, and in the | |
| ismounted code checking for a swap device. | |
| Add new inode I/O abstraction interface which exports an inode as | |
| an I/O object. | |
| Exported ext2_file_flush as a public interface. | |
| In ext2_file_write, we now mark the buffer void * argument as a const, since ext2_file_write doesn't modify the buffer. | |
| Lots of small random portability fixes to make e2fsprogs build under | |
| AIX --- even without the 5L compatibility toolkit, and even using the | |
| uber-crippled AIX native C compiler. | |
| E2fsprogs 1.26 (February 3, 2002) | |
| ================================= | |
| Dumpe2fs will keep going now if the bad block inode can't be read. | |
| (Previously it stopped with a fatal error.) | |
| E2fsck will now give an opportunity to run the journal even if the | |
| recovery flag is not set. This is the default behaviour if e2fsck is | |
| using a backup superblock, since the needs_recovery flag will never be | |
| set in the backup superblock copies. | |
| E2fsck now automatically finds the backup superblock/group descriptors | |
| even when the primary superblock is completely destroyed for 2k and 4k | |
| filesystems. (Previously it just guessed/assumed that we were dealing | |
| with a 1k filesystem in that case, and users had to manually specify | |
| the backup superblock number.) | |
| Fixed a bug in e2fsck where it dereferences a null pointer when there | |
| is a problem opening a filesystem in preen mode. | |
| E2fsck now handles external journals correctly; previously it trashed | |
| the external journal device if the journal needed to be replayed. | |
| Work around ulimit incompatibility problem caused by recent 2.4 | |
| kernels; the unix IO module will automatically try to set any resource | |
| limits to be infinite on startup. | |
| Fixed a bug in e2fsck where it wasn't allocating a new block or inode | |
| bitmap if it wasn't present and the blocksize was 2k or 4k. | |
| (Addresses Debian Bug #116975) | |
| E2fsck will check and fix botched ext3 V1 to V2 superblock updates by | |
| clearing the new V2 fields if they do not make sense or if the ext3 | |
| superblock is version 1 superblock. | |
| E2fsck will automatically relocate the ext3 journal from a visible | |
| file (i.e., /.journal) to an hidden inode if the filesystem has been | |
| opened read/write. This allows the users to add a journal while the | |
| filesystem is mounted, but the next time the system is rebooted, the | |
| journal file will disappear. This avoids problems with backups, | |
| stupid operators with superuser bits, etc. | |
| Fix a bug in fsck where it would not support a filesystem type of | |
| "auto" if the device was specified in terms of LABEL=xxx or UUID=xxx. | |
| Fsck now supports fstab entries of the form "ext3,ext2". It will also | |
| automatically identify reiserfs filesystems. | |
| The number of processes spawned by fsck can now be limited using the | |
| FSCK_MAX_INST environment variable. | |
| Fsck now searchs the LVM proc hierarchy to find logical volumes which | |
| should be searched for UUID and label information. | |
| Work around a bug in 2.4.10+ kernels by trying to unset the filesize | |
| limit if at all possible, when opening a block device. (The filesize | |
| limit shouldn't be applied against writes to a block device.) | |
| In mke2fs and e2fsck, specifying the -c option twice will now do | |
| a read/write test on the disk. Update the man pages to encourage | |
| using the -c option, and to discouraging running badblocks separately, | |
| since users tend to forget to set the blocksize when running | |
| badblocks. | |
| Mke2fs now automatically clears the immutable attribute on a | |
| pre-existing .journal file left over from a previous failed attempt to | |
| add a journal to an alreadyy-mounted filesystem. | |
| Fixed mke2fs's exit codes to consistently indicate when the mke2fs | |
| operation failed. | |
| Mke2fs now creates the lost+found directory with permissions of 0700, | |
| so that files that had previously lived in protected directory are | |
| safe if they get dropped in lost+found and the system administrator | |
| doesn't deal with immediately. (Addresses Debian #bug 118443) | |
| Mke2fs and e2fsck (and all programs that use the | |
| ext2fs_check_if_mounted function) will now properly identify that a | |
| device is mounted, even in cases where devfs has confused things with | |
| multiple devices names with the same identity, or if a dim-witted | |
| system administrator has done something stupid like creating device | |
| file aliases in their home directory. Also now checks for swap devices | |
| by using /proc/swaps. (Addresses Debian bug #106622) | |
| Added a new option (-T) to tune2fs which sets the time a filesystem | |
| was last checked. | |
| Speed up e2image when creating sparse raw image files by optimizing | |
| away excess lseek() system calls. | |
| Fix support of large (> 2GB) files when used as a filesystem in | |
| mke2fs, tune2fs, debugfs, and findsuper. | |
| Debugfs's stat and icheck commands now properly deals with large (> | |
| 2GB) files. | |
| Debugfs's set_super_value command now prints out the list of valid | |
| superblock fields which can be set using the command. | |
| Debugfs's rm and kill_file command now updates the superblock free block | |
| and inode counts, thus keeping the filesystem consistent. | |
| Debugfs's lsdel command now takes an optional argument which allows | |
| the user to only see the most recently deleted files. | |
| A new command (undel) was added to debugfs which automates | |
| undeleting a deleted inode and linking it back to a directory. | |
| Debugfs's ls command now takes a new option, -d, which lists | |
| deleted directory entries. | |
| Debugfs's testb, freeb, setb, and find_free_block commands now take an | |
| optional count argument. | |
| Add support for a new ext2 file attribute, EXT2_NOTAIL_FL, which will | |
| be used to signal that a particular inode should not be eligible for | |
| tail-merging --- this is needed for programs like LILO. | |
| The findsuper (an unreleased, uninstalled utility program) has been | |
| improved to add extra validity checks and to add a progress meter. | |
| (It is still an unsupported program; the officially supported way to | |
| recover from a trashed partition table is to use gpart; findsuper is | |
| for wizards only. :-) | |
| Debugfs was fixed to compile with "configure --disable-swapfs". | |
| Cleaned up various manual pages. (Addresses Debian bug #119624, #120171) | |
| Added new translation file for Turkish. | |
| Programmer's notes: | |
| ------------------- | |
| Fix general gcc -Wall complaints. | |
| E2fsprogs (mostly) works with the dietlibc. | |
| The programming texinfo file has been expanded to include description | |
| of additional libext2fs functions. (Still not compeltely done, but a | |
| lot of the more important functions have been documented.) | |
| Added a umask structure to struct_ext2_filsys, which currently only | |
| modifies the behaviour of ext2fs_mkdir(), but if we add any file | |
| creation functions to libext2fs, we should also make sure they respect | |
| the umask setting. | |
| The build-rpm script was fixed to be a bit more safe. | |
| The tests' Makefile now has a way of automating test case creation | |
| for e2fsck, using "make testnew". | |
| Created a new function, ext2fs_dir_iterate2 which passes more | |
| information to the callback function (identical to the one used by | |
| ext2fs_dblist_dir_iterate). The directory iterator functions take a | |
| new flag, DIRENT_FLAG_INCLUDE_REMOVED, which will return deleted | |
| directory entries. If the directory entry is deleted, the callback | |
| function will be called with the entry paraemter set to | |
| DIRENT_DELETED_FILE. | |
| Added new functions, ext2fs_inode_alloc_stats and | |
| ext2fs_block_alloc_stats, which takes updates block/inode allocation | |
| statistics in the bitmaps, block group descriptors, and superblock | |
| when inodes or blocks are allocated or deallocated. | |
| E2fsprogs 1.25 (September 20, 2001) | |
| =================================== | |
| This is primarily a bug-fix release; no new features were added, but | |
| there are a number of embarassing bug fixes and cleanups applied. | |
| Fix a bug mke2fs which causes stack garbage to be written to disk when | |
| zapping disk sectors. (This bug could cause mke2fs to core dump for | |
| some kernels, I suspect with security enhancement patches.) | |
| Remove unneeded #include of <linux/config.h> which was breaking | |
| building e2fsprogs on the Hurd. (Addresses Debian bug #112414.) | |
| Updated tune2fs man page to reflect the fact that adding or removing a | |
| journal doesn't require running e2fsck. | |
| Remove use of AC_REQUIRE from autoconf which had been used to prevent | |
| AC_CANONICAL_HOST from being called twice; unfortunately this causes | |
| recent autoconf to bomb out since they don't allow AC_REQUIRE to be | |
| used outside of autoconf macros. Fortunately, it doesn't seem to be | |
| necessary any more, anyway. | |
| E2fsck will now not fall back to an alternate superblock if the user | |
| specifies the superblock location explicitly on the command-line. | |
| This allows easier recovery from a situation where the primary | |
| superblock and block groups are slightly corrupted, but the backup | |
| superblocks are completely broken. | |
| Fix problem which caused compile_et and mk_cmds to blow up if | |
| e2fsprogs was in a directory with a pathname that contained spaces. | |
| We are now more paranoid about checking the entry in /etc/mtab to make | |
| sure the filesystem is really mounted, since some broken distributions | |
| (read: Slackware) don't initialize /etc/mtab before checking non-root | |
| filesystems. (Slackware also doesn't check the root filesystem | |
| separately, and reboot if the root filesystem had changes applied to | |
| it, which is dangerous and broken, but there's nothing I can do about | |
| that.) | |
| Make UUID library C++ friendly by adding appropriate extern "C" | |
| declarations and using const in the function declarations. | |
| Fix up the com_err texinfo file so that it can product a valid info | |
| file (previously, it could only be used to generate paper | |
| documentation using texinfo.tex). | |
| E2fsprogs 1.24a (September 2, 2001) | |
| =================================== | |
| Fix brown-paper bug in mke2fs which caused it to segfault when | |
| printing the version string. | |
| E2fsprogs 1.24 (August 30, 2001) | |
| ================================ | |
| Revert the BLKGETSIZE64 support, since for some distributions, this | |
| ioctl has been used by an unofficial kernel patch to update the last | |
| sector on the disk, and this was causing disk corruption problems as a | |
| result. | |
| Mke2fs is now more careful about zapping swap space signatures and | |
| other filesystem/raid superblock magic values so that programs like | |
| mount who try to use hueristics to determine the filesystem type of a | |
| partition are less likely to be confused. | |
| E2fsck will no longer complain if the the mode of EXT2_RESIZE_INO is a | |
| regular file (since Andreas Dilger's on-line resizing tools will set | |
| its mode bits). | |
| Fixed some minor texinfo, man pages nits for spelling errors, | |
| texinfo warnings, etc. (Addresses Debian bug #110621.) | |
| E2fsprogs program no longer print the filesystem version number | |
| (i.e. 0.5b), since it only confuses people and doesn't serve any real | |
| purpose. | |
| E2fsck will once again compile under libc5, since it will supply its | |
| own version of strnlen if necesssary. | |
| mke2fs and tune2fs will allow the use of UUID= or LABEL= specifiers | |
| when specifying the external journal device. tune2fs will also search | |
| devices looking for the externla journal debice when removing. | |
| E2fsprogs 1.23 (August 15, 2001) | |
| ================================ | |
| Add initial support for extended attributes (EA); e2fsck will | |
| correctly handle a filesystem with EA's and check the EA blocks for | |
| corruptions. | |
| E2fsck's symlink sanity checking has been cleaned up. It now checks | |
| the i_size value of fast symlinks, and checks for immutable flags | |
| being set of symlinks, etc. | |
| E2fsck now offers to clear inodes which are special files that have a | |
| non-zero i_blocks or i_size field. (The i_size field check was in the | |
| previous version of the code, but due to a bug it didn't offer to | |
| clear the inode unless i_size and i_size_high were both non-zero.) | |
| E2image can now create "raw" image files, which only contain the | |
| filesystem metadata placed in a spare file so that e2fsck, dumpe2fs, | |
| debugfs, etc., can be run directly on the raw image file. | |
| Add support for the 64-bit block device patches. | |
| Fixed bugs in creating external journals with a 1k blocksize. | |
| Add initial support for external journals (so long as the external | |
| journal only supports a single filesystem) in e2fsck. | |
| Remove requirement for needing to run fsck on a filesystem after | |
| removing a journal (either internal or external). | |
| The man pages now document how to create and manage external journals. | |
| Speed up the check of an ext3 filesystems by avoiding a needless flush | |
| of all of the superblock and block group descriptors. | |
| Speed up creating an internal journal using tune2fs in the case where | |
| the filesystem has a lot blocks already allocated. | |
| Tune2fs has been fixed to make sure that only error messages go to | |
| stderr, and normal message go to stdout. (Addresses Debian bug #108555) | |
| Fixed a minor bug in mke2fs; if -O none is passed to mke2fs, it will | |
| now not set the sparse_super feature. (Addresses Debian bug #108165) | |
| Add support in fsck for the filesystem type "auto". | |
| Fsck -A will not try to interpret device names for filesystems which | |
| have a pass number is 0. (Addresses Debian bug #106696). | |
| Fsck prints a warning message if now valid filesystems are passed to | |
| it. (Addresses Debian Bug #107458.) | |
| E2fsck now gives an explicit warning if there filesystem still has | |
| errors at the end of the run. (Addresses Debian bug #104502) | |
| E2fsck will set the EXT2_ERROR_FS flag if the journal superblock | |
| reflects an error. E2fsck will also not run the orphan list if the | |
| filesystem contains errors, since the orphan list might be corrupted. | |
| E2fsck now prints the number of large files when given the -v option. | |
| Fixed minor memory leaks in e2fsck. | |
| Some minor man pages updates. (Addresses Debian bug #30833, #108174) | |
| E2fsprogs 1.22 (June 22, 2001) | |
| ============================== | |
| Fixed a bug in e2fsck's handling of orphan inodes which are special | |
| files (i.e., block/character device files, named FIFO's, etc.). | |
| Fixed a bug accidentally introduced in e2fsprogs 1.21 which caused | |
| tune2fs to fail at adding a journal to a mounted filesystem. | |
| Fixed a few big-endian bugs in e2fsprogs | |
| * The directory block functions were accidentally reporting | |
| some directories as corrupted when they weren't. | |
| * If e2fsprogs is compiled --disable-swapfs, the C language | |
| equivalents weren't being included for big-endian platforms. | |
| (Fixes Debian bug #101686). | |
| Fixed a Hurd compilation problem. (Addresses Debian bug #101361) | |
| Programmer's notes: | |
| ------------------- | |
| Use platform independent method of defining the BLKFLSBUF and FDFLUSH | |
| ioctls, and allow them to be defined for non-i386 platforms. | |
| The uuid.h header file is now protected against multiple inclusions. | |
| E2fsprogs is now being developed using BitKeeper. Changed the test | |
| scripts to deal with BK's stripping CR characgters from text files, | |
| and changed the top-level Makefile.in to avoid including BitKeeper | |
| files when generating the source tarball. | |
| E2fsprogs 1.21 (June 15, 2001) | |
| ============================== | |
| Added new configure flags which allow a subset e2fsprogs to be built; | |
| this is most useful for boot floopies, since the resulting shared | |
| libraries and programs are slimmed down by removing features that | |
| aren't necessary for a boot floppy. The new flags that were added | |
| are: --disable-swapfs, which removes support for byte swapping old | |
| legacy PPC/68k filesystems, --disable-debugfs, which removes support | |
| for debugfs from the libext2fs library, --disable-imager, which | |
| removes support for the e2image program, and --disable-resizer, which | |
| removes support for resize2fs. | |
| E2fsck now prints the number of mounts or days elapsed since the last | |
| check when e2fsck is forced to check an otherwise clean filesystem. | |
| Tune2fs now prints an informative message about how often a filesystem | |
| will be checked when adding a journal to the filesystem, to remind the | |
| user that he/she may want to adjust those parameters using tune2fs | |
| -c/-i. | |
| Worked around hurd brain-damage which causes e2fsck to sometimes | |
| believe a filesystem is the root filesystem based on device numbers | |
| (since Hurd doesn't have dev_t's, which is arguably a POSIX.1 | |
| violation). | |
| Fixed a bug introduced in 1.20 which caused e2fsck to abort with an | |
| erroneous error with the -F option was specified. | |
| Fixed a ext3 recovery bug in the revoke handling; synchronized with | |
| ext3 0.7a. | |
| Fixed two bugs in e2fsck's handling of dup block handling, dealing | |
| with relatively uncommon edge cases: a directory with an indirect | |
| block which is claimed by another file, and when the last inode in the | |
| filesystem has blocks claimed by another file. | |
| E2fsck now checks to see if the i_size field of a fast symlink is too | |
| big, and offers to clear the symlink if so. | |
| E2fsck now checks to see if i_size_high of special files is non-zero, | |
| and offers to clear i_size_high. | |
| Fix e2fsck's handling of incompatible journal flags so that the user | |
| has chance to abort, and then has the option to clear out the journal | |
| entirely. (Addresses Debian bug #98527.) | |
| Fixed a bug in fsck which could cause it to core dump if a mix of | |
| standard and non-standard device names are used in /etc/fstab. | |
| (Debian bug #100559) | |
| Fixed a bug in debugfs which caused read errors when copying a file to | |
| not be noticed. | |
| The debugfs set_super_value command can now modify the s_lastcheck field. | |
| Fixed a bug in lsattr and chattr which was accidentally introduced in | |
| 1.20 to support > 2GB files; both lsattr and chattr wasn't reading | |
| directories correctly because the change modified the layout of struct | |
| dirent to be incompatible with the libe2p shared library. | |
| Cleaned up the mke2fs manual page and included a discussion about why | |
| it's good to periodically check the filesystem even when journaling is | |
| enabled. | |
| Programmer's notes: | |
| ------------------- | |
| Fix general gcc -Wall complaints. | |
| The types needed by the ext2 header files are now provided by | |
| lib/ext2fs/ext2_types.h, instead of include/asm/types.h. | |
| Integers are now preferred to longs when trying to find a 32-bit type | |
| in ext2_types.h. Also, if linux/types.h has already been defined, | |
| don't try to redefine the types. | |
| Fixed make depend script so that it automatically corrects the | |
| pathname cleanups performed by make -M, so I don't have to fix them up | |
| by hand. | |
| Fixed the d_loaddump test case to be more robust, and not depend on | |
| bash'isms. | |
| Removed debugfs's dependence on pread(), which was accidentally | |
| intrudced in e2fsprogs 1.20 | |
| Fixed a performance bug in the libext2fs's icount routine; the size | |
| estimate of the icount array was incorrectly being calculated. | |
| Removed use of the badblocks compatibility functions in the e2fsprogs | |
| programs. | |
| Added paranoia code which protects against strange cases where /etc | |
| isn't on the root filesystem, or if /etc/mtab doesn't exist. | |
| The header file ext2_types.h is now installed. | |
| Autoconf is used to determine when we are on big-endian machines, | |
| instead of doing run-time tests, to save a few bytes of code. | |
| The ext2fs_mark_generic_bitmap and ext2fs_unmark_generic_bitmap | |
| functions are no longer inline functions, which saves space and | |
| doesn't really cost any real performance. | |
| The ext2fs library no longer depends on the e2p library. (What need | |
| there was of it --- namely, fsetflags, was coded in-line). | |
| Fixed the makefile so that lib/ext2fs/ext2_types.h is generated even | |
| when the user is stupid and tries compiling the package using "make | |
| install" as root. | |
| Miscellaneous code cleanups: | |
| * Added missing files from Makefile.in's SRCS file, so that | |
| their dependencies would be properly calculated. | |
| * Removed redundant code | |
| * Fixed comments in code | |
| * Removed no-longer unneeded argsused #pragma. | |
| E2fsprogs 1.20 (May 20, 2001) | |
| ============================= | |
| Add support for replaying the ext3 journal purely in user mode, | |
| including handling the orphaned inode list. Used code contributed by | |
| Andreas Dilger, with bug fixes and the orphaned inode handling done | |
| by Theodore Ts'o. | |
| The mke2fs and tune2fs programs can create or modify a filesystem to | |
| include an ext3 journal. Tune2fs also can be used to remove an ext3 | |
| journal from a filesystem. | |
| E2fsck will now check for the existence of a linked list of orphan | |
| inodes in the superblock, and clear those inodes before starting the | |
| rest of the filesystem check (but after the journal playback). | |
| E2fsck now validates the file descriptor passed to the -C option, | |
| which saves against the completion bar getting written to an | |
| unexpected location, such as the disk being checked. (Debian | |
| bug/wishlist #55220) | |
| E2fsck will now bump the filesystem revision number from zero to one | |
| if any of the compatibility bits are set. | |
| Fixed a bug where a badly corrupted directory on a big endian system | |
| could cause e2fsck to die with a bus error. The | |
| ext2fs_read_dir_block() and ext2fs_process_dir_block() functions in | |
| the ext2 library now does alignment sanity checks on the rec_len field | |
| of the directory entry before using it. | |
| The ext2 library has been enhanced to make tune2fs safe to run on | |
| mounted filesystems. (Users could usually get away with using tune2fs | |
| on mounted filesystems before, but with the advent of ext3 and | |
| journaling, it became important to make tune2fs was *really* safe for | |
| use even when the filesystem being modified is mounted.) E2label is | |
| now implemented by tune2fs using an argv[0] dispatch, so that e2label | |
| is also now safe for use on mounted filesystems. | |
| Added a new program, e2image, which creates a backup of critical ext2 | |
| filesystem data structures. The generated image file can be examined | |
| using dumpe2fs and debugfs. In the future, e2fsck will be able to use | |
| the image file to help recover very badly damaged filesystems. | |
| Fixed a number of LFS bugs in e2fsck; very, very large (> 2**42) files | |
| no longer cause e2fsck to bomb out. Also treat files > 2GB as being | |
| large file when deciding whether or not the filesystem has large files. | |
| Fixed lsattr and chattr so that they work correctly on large files. | |
| (Fixes Debian bug #72690.) | |
| Removed limitation in get_device_size() which imposed a one terrabyte | |
| filesystem limitation. (Most 2.2 kernels still have a signed int | |
| problem which cause 1 TB block device limitation. Fortunately, the | |
| kernel patches to fix this are much easier than fixing the 2TB | |
| limitation in the kernel. :-) | |
| A max_mount_count of zero is now treated as if no mount count were | |
| set. (Previously, no mount count was indicated by using -1, and a | |
| mount count of zero caused e2fsck to always be run.) | |
| Mke2fs supports two new filesystem types largefile and largefile4. | |
| Mke2fs now adds some randomness in s_max_mount_count so that multiple | |
| filesystems won't be all checked at the same time under normal | |
| operations. | |
| Fixed bug in the progress bar printing code which could cause e2fsck | |
| to core dump on an illegal filesystem. | |
| Fixed bug in fsck which could allow more than one instance of e2fsck | |
| to be printing a progress bar. (Debian bug #65267) | |
| Fsck using a UUID or a LABEL specifier will work even if devfs is | |
| compiled into the kernel and not mounted. If the pathnames in | |
| /proc/partitions are incorrect, fsck will search /dev for the correct | |
| device (using the new ext2fs_find_block_device library function). | |
| Fsck now also checks the RAID devices first so that they are properly | |
| found when they are in use. Support has also been added to support | |
| additional IDE disks and the DAC 960 device names. (Debian bug #94159) | |
| Fixed a bug in fsck which caused it not deal properly with 16 | |
| byte long filesystem labels. | |
| Fsck's -t option has been made a lot more flexible. The semantics for | |
| what happens if a comma-separated list to fsck has been regularized, | |
| and it is now possible to filter what filesystems will get checked | |
| based what is in the filesystem's fstab entry's option field. (Debian | |
| bug #89483.) | |
| The dumpe2fs program can now print out the group description | |
| information in hex, and also prints the location of the superblock and | |
| block group descriptor for those block groups that have them. | |
| Mke2fs now clears the ext2 superblock before it starts creating a | |
| filesystem, so that the superblock magic number is only written if the | |
| filesystem creation process successfully completes. | |
| The debugfs program's stat command now pretty-prints the blocks used | |
| by an inode so that it's more compact and informative. | |
| The debugfs stats command now uses the same libe2p code (which is used | |
| by dumpe2fs) to print the superblock header information. This is more | |
| complete, and it avoids a bit of code duplication. | |
| Added a new debugfs command, set_super_value (ssv) which allows the | |
| user to set arbitrary superblock fields. | |
| Debugfs was extended to support inode numbers in hex (by prefixing | |
| them with 0x), and so that modify_inode can set the inode generation | |
| number. Also, there is now a new function command called logdump | |
| which will dump an ext3 journal. | |
| Fixed a bug in debugfs so that quitting out of the pager doesn't kill | |
| debugfs. | |
| Debugfs's dump command now stops immediately upon reporting a disk | |
| read error. (Fixed a bug in ext2fs_file_read library routine which | |
| caused debugfs not to stop.) (Debian bug #79163) | |
| On systems with /proc/mounts (mainly Linux systems), /proc/mounts is | |
| checked before /etc/mtab is used, since /proc/mounts is more likely to | |
| be accurate. | |
| Added portability fixes for Solaris and Linux/ia64. | |
| Various manual pages were clarified and cleaned up. (Fixed debian | |
| bugs #63442, #67446, and #87216) | |
| Programmer's notes: | |
| ------------------- | |
| The e2fsck message printer now supports %Iu and %Ig, which will print | |
| out the inode's user and group owners, respectively. | |
| E2fsprogs now includes its own version of include/linux/ext2_fs.h, so | |
| that no longer dependent on the system having the correct version of | |
| the kernel header files. | |
| Added a new function to libext2, ext2fs_find_block_device(), which | |
| searches the system (i.e., /dev, /devfs, /devices) for a pathname to a | |
| device given its device number. | |
| Added a new function to libext2, ext2fs_sync_device, which centralizes | |
| all of the places which might try to use the BLKFLSBUF or FDFLUSH | |
| ioctls (and usually failing to define them since the system header | |
| files don't usually do this for us, and we're trying to avoid usage of | |
| kernel include files now). | |
| Added new utility programs in tests/progs: random_exercise and | |
| hold_inode. They aren't built by default; they're useful for | |
| exercising ext3 filesystem code. | |
| Added a new ext2 filesystem flag, EXT2_FLAG_SUPER_ONLY, which causes | |
| the filesystem close functions to only update the superblock, and to | |
| not touch the block group descriptors. Needed by tune2fs when | |
| modifying a mounted filesystem. | |
| Got rid of struct ext2fs_sb and replaced it with the standard struct | |
| ext2_super_block from include/linux/ext2_fs.h. Note: this may break | |
| source (but not binary) compatibility of some users of the ext2 | |
| library. Those applications should just simply do a global search and | |
| replace of struct ext2fs_sb with struct ext2_super_block, and include | |
| the new header file <ext2fs/ext2_fs.h> which defines it. | |
| The ino_t type has been renamed ext2_ino_t to protect applications | |
| that attempt to compile -D_FILE_OFFSET_BITS=64, since this | |
| inexplicably changes ino_t(!?). So we use ext2_ino_t to avoid an | |
| unexpected ABI change. | |
| The Makefiles have been reworked so that "make check" can be run from | |
| the top-level Makefile. | |
| Fix general gcc -Wall complaints and removed dead code. | |
| Remove use of NOARGS, because we assume everyone does ANSI C these | |
| days. | |
| Added build-rpm script from sct. | |
| New functions ext2fs_image_{inode,super,bitmap}_{read,write} added | |
| to support e2image. | |
| New function ext2fs_flush_icache which must be called if the | |
| application program modifies the inode table blocks without going | |
| through ext2fs_write_inode() interface. | |
| New ext2fs_check_mount_point() function, which will return the mount | |
| point of a device if mounted. | |
| The io_channel abstraction now has an optional interface, | |
| io_channel_write_range, which allows specific byte ranges to be | |
| written. | |
| The unix_io IO channel now supports write-through caching, so that | |
| journal creation is more efficient. | |
| Added x86 assembly language routines to support byte swapping, to | |
| reduce executable size. | |
| Fixed bug in the utility program subst so that it's possible to | |
| replace a substitution variable with a zero-length string. | |
| Fixed numbering e2fsck pass1 problem numbers; an extra zero had | |
| slipped into some of the problem number. | |
| E2fsprogs 1.19 (July 13, 2000) | |
| ============================== | |
| Release the resize2fs program since the timeout before it could | |
| be released under the GPL has finally expired. | |
| Add experimental support needed for the ext2 compression patches. | |
| This requires compiling e2fsprogs with the --enable-compression flag | |
| to the configure script. | |
| Added ext3 journalling support. E2fsck will run the journal (if | |
| necessary) by temporarily mounting the filesystem. /sbin/fsck.ext3 is | |
| installed as a symlink to e2fsck. Fsck has been taught about ext3, | |
| and treats it the same as ext2 in terms of the progress bar logic. | |
| Dumpe2fs will display the superblock journaling information if the | |
| filesystem has a journal. The ext2 library will now permit opening an | |
| ext3 filesystem with the recovery flag set. This is necessary for | |
| on-line dump's to work correctly, but there may be issues with this | |
| working well since ext3 is much less agressive about syncing blocks to | |
| the filesystem, since they're safe on the journal. | |
| Tune2fs and e2fsck have been changed to allow the mount_count check to | |
| be disabled by setting max_mount_count to -1. (This was already | |
| supported by the kernel.) | |
| Create a symbolic link for fsck.ext3, since the e2fsprogs utilities | |
| are used for ext3 as well. | |
| Added internationalization support for e2fsprogs; must be enabled | |
| by passing --enable-nls to configure. | |
| Always use the provided ext2fs header files to insulate ourselves from | |
| kernel version changes. Which include files are used by e2fsprogs | |
| have also been cleaned up to improve portability. | |
| Limit the number of times that e2fsck updates the progress bar so that | |
| people who are booting using a 9600 baud console don't get swampped by | |
| too many updates. | |
| Improved the loop detection algorithm in e2sck's pass #3 so that it is | |
| much, much faster for large filesystems with a large number of | |
| directories. | |
| The memory footprint for e2fsck is now slightly smaller than before. | |
| E2fsck now checks if special devices have a non-zero size, and offers | |
| to clear the size field if it finds such an inode. | |
| E2fsck now checks if special devices have the append-only flag set, | |
| and offers to clear the inode. | |
| E2fsck now properly handles some "should never fail" cases during a | |
| bitmap copy in pass5. | |
| E2fsck now properly prints control characters in filenames as ^A .. ^Z. | |
| E2fsck now calculates the correct location of the backup superblock in | |
| the case of filesystem blocksizes > 1k. | |
| Fixed a bug in e2fsck's calculation of the number of inodes_per_block | |
| which normally didn't cause problems under most filesystem parameters, | |
| but could cause a valid superblock to be rejected in extreme cases. | |
| Other checks for validating superblock values were made more | |
| stringent. | |
| Added non-destructive write testing to the badblocks program, courtesy | |
| of David Beattie. The badblocks also now has an option to input the | |
| current set of bad blocks, so that known bad blocks are skipped to | |
| speed up the badblocks test. There is also a persistent rescan | |
| feature which causes badblocks to run until it has completed some | |
| number of passes without discovering any new bad blocks. | |
| Badblocks now checks to see if the device is mounted and refuses to do | |
| the tests involving writing to the device if it is mounted. Also, | |
| badblocks now allows the number of blocks to be checked to be | |
| defaulted to the size of the partition. | |
| Fixed a bug in fsck which didn't allow non-root users to be able to | |
| check filesystems if there were any LABEL= or UUID= entries in | |
| /etc/fstab. | |
| The Hurd doesn't support the filetype filesystem feature. The mke2fs | |
| program now makes sure that for the Hurd, the filestype feature is | |
| turned off. E2fsck will check to see if the filetype feature is | |
| turned on for Hurd filesystems, and offer to turn off the feature. | |
| Mke2fs now has a safety check to make sure the number of blocks do not | |
| exceed 32 bits even on a 64 bit platform. | |
| Really fixed a bug in fsck to allow "fsck -As" to run interactive | |
| fsck's. (For those people who like to do interactive fsck's in the | |
| /etc/rc scripts!?!) | |
| Debugfs has a few new features: the rdump command, which will do a | |
| recursive dump of a directory and all of its contents, and the lcd | |
| command which does a local chdir (much like the ftp command of the | |
| same name). In addition, the debugfs program and the open_filesystem | |
| command now takes three new options: -b and -s, which allows the | |
| blocksize and superblock location to be specified, and the -c option | |
| which is used in catastrophic situations where the block group | |
| descriptors are corrupt. If the -c option is specified, debugfs will | |
| skip trying to read in the block and inode bitmaps. | |
| Debufs's lsdel command was fixed to handle bad blocks in the inode | |
| table. | |
| A Y2K bug in debugfs's "ls -l" handling was fixed by switching to use | |
| 4 digit years. | |
| General improvements in error messages | |
| - Mke2fs prints a sane error message if the partition size is zero | |
| (usually because the partition table wasn't reread by the | |
| kernel due to the partition being busy), instead of "invalid | |
| argument passed to ext2 library while initializing superblock". | |
| - Fsck now prints more self-explanatory message if an invalid UUID= | |
| or LABEL= specification is passed to it. | |
| UUID library changed to use the LGPL. | |
| Fixed a bug in the UUID library where very rapid calls to the | |
| time-based UUID generator could cause duplicate UUID's to be returned. | |
| This was not a problem for e2fsprogs, but it could be a problem for | |
| other users of the library. | |
| Make the UUID library more robust in the face of missing or an | |
| improper /dev/urandom or /dev/random files. | |
| Added some random portability fixes for Solaris. | |
| Some minor man page updates. | |
| Fixed a memory leak in the ss library. | |
| Programmer's notes: | |
| ------------------- | |
| We now try to use lseek64 and open64 from the LFS if possible. | |
| The 3rd parameter in e2p's print_flags is now a flags word, instead of | |
| a boolean option. | |
| The mark and unmark bitmap functions now return the previous state of | |
| the bit that was being changed, which is useful for some speed | |
| optimizations. | |
| The following functions have been added to enhance the badblocks list | |
| handling in libext2fs: ext2fs_write_bb_FILE, ext2fs_read_bb_FILE2, and | |
| ext2fs_badblocks_equal. | |
| The ext2 header files now have the latest journalling fields to the | |
| superblock. | |
| The ext2fs_mkdir function in libext2fs now properly backs out of error | |
| conditions robustly. | |
| Cleaned up makefiles: | |
| - to cleanly compile with the -j flag. | |
| - so distclean removes all generated files. | |
| - so in case of an error while installing header files, the make aborts. | |
| Fix test_script so that it works correctly when compiling in the | |
| source directory. | |
| The random UUID generation routine has been made slightly better in | |
| the case where /dev/random doesn't exist. (Use of randomly-based UUID | |
| is still not recommended if /dev/random doesn't exist, however; it's | |
| better to use the time/ethernet MAC address UUID in this case.) | |
| Clean up the build process so it's more friendly in case of missing | |
| directories. | |
| The ext2fs header file can now be #include'd into C++ programs. | |
| The e2p.h header file is now installed. | |
| Added workaround to a gawk 3.0.5 bug in lib/ss/mk_cmds. | |
| E2fsprogs 1.18 (November 10, 1999) | |
| ================================== | |
| Fix a core dumping bug in e2fsck if an imagic inode is present or | |
| (more rarely) if the filesystem is badly corrupted enough that e2fsck | |
| has to restart pass 1 processing. E2fsck now closes the filesystem | |
| before freeing a large number of its data structures, so in the case | |
| of future memory faults, at least the fixed filesystem will be fully | |
| written out. | |
| If a filesystem doesn't support imagic inodes, and e2fsck discovers an | |
| imagic inode, it will offer to clear the imagic flag. | |
| E2fsck will now offer to clear the immutable flag on special files | |
| (device/socket/fifos) when running it in non-preen mode. | |
| E2fsck will now set the filetype when creating /lost+found, and when | |
| connected orphaned inodes to /lost+found. | |
| Debugfs's ncheck and icheck commands now handles the case where there | |
| are bad blocks in the inode table without bombing out. | |
| The badblocks list processing code has been made more efficiently for | |
| appending a large number of (ordered) badblocks to the badblocks list. | |
| Some minor man page updates. | |
| Fsck now allows interactive e2fsck's when using fsck -As (not a common | |
| mode, but some people like to do this in boot scripts for silly reasons). | |
| Programmer's notes: | |
| ------------------- | |
| The internal e2fsck problem code for PR_2_SPLIT_DOT was fixed to meet | |
| with the problem code convention. | |
| The badblocks list regression test program has been updated to work | |
| with previously made API name changes. | |
| The ext2fs_free() command now uses the new badblocks API to avoid | |
| using the compatibility layer. | |
| Added new regression test cases; the run_e2fsck test script now | |
| supports the ability for a test case to run a prepratory command | |
| before running e2fsck. | |
| E2fsprogs 1.17 (October 26, 1999) | |
| ================================= | |
| Fixed nasty typo in fsck which caused parallelized fsck's to go into an | |
| infinite loop. | |
| Fixed a bug in fsck where it used strncmp to compare a binary UUID, | |
| thus potentially causing problems if a binary UUID contained a NULL | |
| character. | |
| E2fsck now uses stricter checks for directory entries in pass 2: | |
| zero-length filenames are not allowed; neither are 8 byte long | |
| directory entries. | |
| The debugfs "dirty" command now clears the filesystem valid bit. | |
| (Previously this just set the dirty-as-in-needs-writing-out-to-disk | |
| bit in the in-core superblock image. The new functionality is more | |
| what the user expects, and is more useful.) | |
| Added a debugging hook to test parallel fsck; if the environment | |
| variable FSCK_FORCE_ALL_PARALLEL, then filesystems on the same drive | |
| will be checked in parallel when they normally would not be. | |
| Programmer's notes: | |
| ------------------- | |
| Fixed some #ifdef's for compilation under the Hurd OS. | |
| Fixed minor W2K compatibility problems. | |
| Fixed some miscellaneous GCC warnings. | |
| E2fsprogs 1.16 (October 22, 1999) | |
| ================================= | |
| Fixed a race condition bug in fsck; when printing a progress bar, if | |
| checking multiple filesystems in parallel, it was possible for fsck to | |
| send e2fsck a SIGUSR1 signal before e2fsck had installed its signal | |
| handler, which would cause it to terminate with a signal 10. | |
| E2fsck now properly handles filesystems that have the | |
| INCOMPAT_FILETYPE feature turned on. It can be used to convert a | |
| filesystem into using or not using FILETYPE feature. | |
| E2fsck now properly handles filesystems that have the IMAGIC feature | |
| turned on (this is used on Linux AFS servers). | |
| The mke2fs program now creates filesystems that have the filetype and | |
| sparse_superblock features enabled by default, unless it is run on a | |
| pre-2.2 kernel. These features are not supported by a pre-2.2 kernel, | |
| so there is now a new flag -O which allows the user to specify with | |
| which features she would like to create the filesystem; "mke2fs -O | |
| none" will create a filesystsem compatible with 2.0 kernels. | |
| The tune2fs program now has a -O option which allows the user to set | |
| and reset "safe" filesystem features. Currently, the only ones which | |
| allows to be modified are the filetype and sparse_superblock features. | |
| Note setting or clearing either feature will require running e2fsck on | |
| the filesystem afterwards. (n.b. Clearing the sparse_superblock feature | |
| requires that there is enough free space on the filesystem for the | |
| extra superblocks which will be created by e2fsck.) | |
| Debugfs can now set and print filesystem features in the superblock | |
| using the "features" command. Dumpe2fs will print out the complete | |
| set of features when listing the superblock. | |
| Dumpe2fs has new options -f (force) and -h (header-only). | |
| Fixed a bug in e2fsck which could cause the PROGRAMMING ERROR/bonehead | |
| message to come up. This could happen when decrementing or | |
| incrementing a link count could result in an overflow. | |
| Fixed a bug in e2fsck where the block count on the lost+found | |
| directory would not be properly incremented when the directory was | |
| expanded to the point where an indirect block needed to be allocated. | |
| E2fsck now makes some additional sanity checks on the superblock to | |
| avoid crashing or giving a memory allocation error if some of the | |
| values in the superblock are unresonable (but the superblock otherwise | |
| looks valid). | |
| Fixed a bug in e2fsck where a very badly corrupted filesystem might | |
| require two passes to completely fix the filesystem. This happened if | |
| an inode claimed blocks that was part of the filesystem metadata | |
| (typically, when garbage was written into an inode table or indirect | |
| block, since this kind of filesystem corruption normally doesn't | |
| happen otherwise). | |
| On the Alpha, glibc declares st_flags although it isn't actually used; | |
| the configure script was improved to detect this case so that | |
| e2fsprogs can avoid using the non-functional stat field. | |
| The manual pages were updated to use a more consistent formatting | |
| style consistent with standard Unix man pages. Mke2fs's man page | |
| added documentation for a few previously undocumented options. | |
| Fixed minor display bugs in tune2fs and mke2fs. | |
| Programmer's notes: | |
| ------------------- | |
| Improved portability of e2fsprogs to non-Unix systems (in particular, NT). | |
| Added features to parse and print feature strings into the e2p library. | |
| (e2p_feature2string, e2p_string2feature, e2p_edit_feature). | |
| ext2fs_mkdir() and ext2fs_new_dir_block() now creates directories | |
| whose directory entries contain proper filetype information if the | |
| filesystem supports it. | |
| ext2fs_link() now uses the low 3 bits of its flags parameter to pass | |
| the directory entry filetype information. This is used to set the | |
| directory entry filetype information if the filesystem supports it. | |
| Fixed a bug in ext2fs_expand_dir() where the block count in a | |
| directory's inode would not be properly incremented when the directory | |
| was expanded to the point where an indirect block needed to be | |
| allocated. | |
| E2fsprogs 1.15 (July 18, 1999) | |
| ============================== | |
| Add configuration checks so that e2fsprogs will compile cleanly on | |
| Linux 2.3 kernels that have renamed i_version to i_generation. | |
| E2fsck now prints a progress/completion bar (and not just a simple | |
| spinner) if the -C0 option is requested or if it receives a SIGUSR1 | |
| signal. Fsck will automatically manage the (potentially muliple) | |
| e2fsck processes to print completion bars if it is given a -C option, | |
| with the right thing happening if multiple filesystems are being | |
| checked in parallel. | |
| Mke2fs now has better automatic hueristics to determine the filesystem | |
| parameters to be used for a particular filesystem. Added a new option | |
| -T which allows the user to specify how the filesystem is to be used, | |
| which helps mke2fs do a better job selecting the filesystem parameters. | |
| Mke2fs now creates revision 1 filesystems by default, and with the | |
| sparse superblock feature enabled. The sparse superblock feature is | |
| not understood by Linux 2.0 kernels, so they will only allow read-only | |
| mounts of filesystems with this sparse superblocks. | |
| Fix bug where if /dev/null couldn't be opened (should never happen), | |
| e2fsck would hang in a tight loop. | |
| Make e2fsck handle the case where /lost+found isn't a directory. | |
| E2fsck now uses mallinfo if it exists to get accurate statistics about | |
| its memory usage. | |
| Fix bug in e2fsck where it wouldn't check to see if a disconnected | |
| inode had any problems before connecting it to /lost+found. | |
| Add check to e2fsck so it makes sure that total number of inodes in | |
| the filesystem is a sane number. | |
| Fix fencepost error when clearing an the end of the block bitmap which | |
| caused the last block in the bitmap not to get cleared. | |
| Cleaned up a number of messages in e2fsck: | |
| * The message "Group's #'s copy of the group descriptor..." | |
| was fixed so that the correct number would be displayed. | |
| * Added missing space in the "disk write-protected" error messsage | |
| * Cleaned up the error message printed when a non-interactive | |
| e2fsck needs to abort a check because the filesystem | |
| appears to be mounted. | |
| Added a new command-line utility, uuidgen, which will create and print | |
| a UUID. | |
| Make debugfs's icheck command more robust by checking to make sure an | |
| inode has valid blocks before interarting over the inode's blocks. | |
| UUID generation now uses a random-based scheme whenever possible to | |
| prevent potential privacy problems. | |
| Man pages for all of the UUID functions in the lirbary were added. | |
| Fixed bug in fsck so it won't coredump if a filesystem not in | |
| /etc/fstab is given to it. | |
| Fsck now understands the UUID=xxxx and LABEL=yyyy forms in /etc/fstab | |
| that most of the other mount utilities understands. | |
| Mke2fs will make a filesystem even if it appears mounted if the force | |
| option is given. | |
| Dumpe2fs has new command-line options which allow a filesystem expert | |
| to specify the superblock and blocksize when opening a filesystem. | |
| This is mainly useful when examining the remains of a toasted | |
| filesystem. | |
| The badblocks program has been updated to display correctly on disks | |
| with large block numbers. | |
| The badblocks program no longer gives spurious errors when errors | |
| occur on non-block boundaries, which is common if the blocksize is | |
| larger than 1k. | |
| Mke2fs will sync the disk device every MKE2FS_SYNC block groups if the | |
| MKE2FS_SYNC environment variable is set. This is to work around a VM | |
| bug in the 2.0 kernel. I've heard a report that a RAID user was able | |
| to trigger it even using a 2.2 kernel, but hopefully it will not be | |
| needed for most Linux 2.2 users. | |
| Fixed miscellaneous documentation and man pages. | |
| Programmer's notes: | |
| ------------------- | |
| Cleaned up functions such as pass1_get_blocks, pass1_read_inode which | |
| in e2fsck's pass1.c really should have been static. | |
| The return value of the uuid_compare() function was changed to make it | |
| match with the convetions used by strcmp, memcmp, and Paul Leach's | |
| UUID sample document. | |
| The "make depend" process has now been made more automated; it now | |
| automatically word-wraps the dependencies, and only replaces source | |
| Makefile.in if there has been a change in the dependencies. Also, a | |
| top-level "make depend" now recurses through all the subdirectories | |
| automatically. | |
| The Makefile in .../util has been changed so that subst is built using | |
| the native C compiler during a cross-compilation, since the subst | |
| program is only used during the build process. Also add an explicit | |
| rule to build util/subst by cd'ing to the correct directory and | |
| running Makefile. | |
| The man directories are defined in terms mandir, so that the configure | |
| script can override the location of the manual pages. | |
| The config files have been updated to recognize new machine types for | |
| both the i386 and alpha families. | |
| Fsck has been modified so that it will accurately create an | |
| fsck_instance even when the noexecute flag is set. This allows for | |
| accurate debugging of the fsck pass structure. Also, when the verbose | |
| flag is given twice, fsck will print debugging information about when | |
| fsck is waiting for jobs to finish. | |
| E2fsprogs 1.14 (January 9, 1999) | |
| ================================ | |
| Fix the fstab parsing code so that it can handle blank lines and | |
| comment characters. Also, missing pass numbers need to be treated as | |
| zero. | |
| Fixed a bug in e2fsck where under some circumstances (when e2fsck | |
| needs to restart processing after fixing an egregious inconsistency) | |
| it would try to access already freed memory. | |
| E2fsck now prints non-printable characters in directory entries and | |
| pathnames using '^' and 'M-' notation. | |
| Fixed chattr so that it will ignore symbolic links when doing | |
| recursive descent traversals. For both chattr and lsattr, no longer | |
| print the version string unless the -V option is given. | |
| Allow the system administrator to directly specify the number of | |
| inodes desired in the filesystem, for some special cases where this is | |
| necessary. | |
| Fix portability problems so that e2fsprogs can be compiled under Linux | |
| 1.2 systems and Solaris systems. | |
| Update the config.guess file with a more recent version that will | |
| identify newer Linux platforms. | |
| Programmer's notes | |
| ------------------ | |
| Ext2fs_read_inode and ext2fs_write_inode will now return an error if | |
| an inode number of zero is passed to them. | |
| E2fsprogs 1.13 (December 15, 1998) | |
| ================================== | |
| Fixed a bug in debugfs where an error messages weren't getting printed | |
| when the ext2 library routines to read inodes returned errors in the | |
| stat, cmri and rm commands. | |
| Fixed a bug in mke2fs so that if a ridiculous inode ratio parameter is | |
| provided, it won't create an inode table smaller than the minimum | |
| number of inodes required for a proper ext2 filesystem. | |
| Fsck now parses the /etc/fstab file directly (instead of using | |
| getmntent()), so that it can distinguish between a missing pass number | |
| field and pass number field of zero. This caused problems for | |
| diskless workstations where all of the filesystems in /etc/fstab have | |
| an explicit pass number of zero, and fsck could not distinguish this | |
| from a /etc/fstab file with missing pass numbers. | |
| E2fsck will create a /lost+found directory if there isn't one in the | |
| filesystem, since it's safer to create the lost+found directory before | |
| it's needed. | |
| Fixed e2fsck so that it would detect bogus immutable inodes which | |
| happen to be sockets and FIFO files, and offer to clear them. | |
| If a filesystem has multiple reasons why it needs to be checked, and | |
| one of the reasons is that it is uncleanly mounted, e2fsck will print | |
| that as the reason why the filesystem is being checked. | |
| Cleaned up the output routines of mke2fs so that it doesn't overflow | |
| an 80 column display when formating really big filesystems. | |
| Added a sanity check to e2fsck to make sure that file descriptors 0, | |
| 1, 2 are open before opening the hard disk. This avoids a problem | |
| where a broken program might exec e2fsck with those file descriptors | |
| closed, which would cause disastrous results if the kernel returns a | |
| file descriptor for the block device which is also used by FILE * | |
| stdout. | |
| Fixed up the e2fsck progress reporting functions so that the values | |
| reliably reach 100% at the completion of all of the e2fsck passes. | |
| Fixed minor documentation bugs in man pages and usage messages. | |
| Programmer's notes: | |
| ------------------- | |
| Fixed a number of lint warnings in the ext2fs library and potential | |
| portability problems from other OS's header files that might define | |
| CPP macros for names like "max" and "min". | |
| ext2fs_badblocks_list_add() has been made more efficient when it needs | |
| to grow the bad blocks list. | |
| Fixed a bug in e2fsck which caused it to dereference a freed pointer | |
| just before exiting. | |
| Fixed the substition process for generating the mk_cmds and compile_et | |
| scripts so that they will work outside of the build tree. | |
| Add sanity check to e2fsck so that if an internal routine | |
| (ext2fs_get_dir_info) returns NULL, avoid dereferencing the pointer | |
| and causing a core dump. This should never happen, but... | |
| E2fsprogs 1.12 (July 9, 1998) | |
| ================================== | |
| E2fsprogs now works with glibc (at least with the version shipped wtih | |
| RedHat 5.0). The ext2fs_llseek() function should now work even with | |
| i386 ELF shared libraries and if llseek() is not present. We also | |
| explicitly do a configure test to see if (a) llseek is in libc, and | |
| (b) if llseek is declared in the system header files. (See standard | |
| complaints about libc developers don't understand the concept of | |
| compatibility with previous versions of libc.) | |
| The ext2fs library now writes out the block group number in each of | |
| the superblock copies. This makes it easier to automatically | |
| determine the starting block group of the filesystem when the block | |
| group information is trashed. | |
| Added support for the EXT2_FEATURE_INCOMPAT_FILETYPE feature, | |
| which means that e2fsprogs will ignore the high 8 bits of the | |
| directory entry's name_len field, so that it can be used for other | |
| purposes. | |
| Added support for the EXT2_FEATURE_RO_COMPAT_LARGE_FILE feature. | |
| E2fsprogs will now support filesystems with 64-bit sized files. | |
| Added support for the EXT2_FEATURE_COMPAT_DIR_PREALLOC feature. | |
| Added new program "e2label", contributed by Andries Brouwer. E2label | |
| provides an easy-to-use interface to modify the filesystem label. | |
| Fixed bug so that lsattr -v works instead of producing a core dump. | |
| Fixed a minor bug in mke2fs so that all groups with bad superblock | |
| backup blocks are printed (not just the first one). | |
| Mke2fs will check the size of the device, and if the user specifies a | |
| filesystem size larger than the apparent size of the device it will | |
| print a warning message and ask if the user wants to proceed. | |
| E2fsck has a new option -C, which sends completion information to the | |
| specified file descriptor. For the most part, this is intended for | |
| programs to use, although -C 0 will print a spinning character to the | |
| stdout device, which may be useful for users who want to see something | |
| happening while e2fsck goes about its business. | |
| Fixed a bug in e2fsck which could cause a core dump when it needs to | |
| expand the /lost+found directory, and sometimes the bitmaps haven't | |
| been merged in. Also fixed a related bug where ext2fs_write_dir_block | |
| was used to write out a non-directory block. (Which would be bad on a | |
| non-Intel platform with byte swapping going on.) | |
| Fixed bug in e2fsck where it would print a "programming error" message | |
| instead of correctly identifying where a bad block was in used when | |
| the bad block was in a non-primary superblock or block group | |
| descriptor. Also fixed a related bug when sparse superblocks are in | |
| use and there is a bad block where a superblock or block group | |
| descriptor would have been in a group that doesn't include a | |
| superblock. | |
| Fixed a bug in e2fsck (really in libext2fs's dblist function) where if | |
| the block group descriptor table is corrupt, it was possible to try to | |
| allocate a huge array, fail, and then abort e2fsck. | |
| ext2fs_get_num_dirs() now sanity checks the block group descriptor, | |
| and subsitutes reasonable values if the descriptors are obviously bogus. | |
| If e2fsck finds a device file which has the immutable flag set and the | |
| i_blocks beyond the normal device number are non-zero, e2fsck will | |
| offer to remove it, since it's probably caused by garbage in the inode | |
| table. | |
| When opening a filesystem, e2fsck specially checks for the EROFS error | |
| code, and prints a specific error message to the user which is more | |
| user friendly. | |
| If the filesystem revision is too high, change the e2fsck to print | |
| that this is either because e2fsck is out of date, or because the | |
| superblock is corrupt. | |
| E2fsck now checks for directories that have duplicate '.' and '..' | |
| entries, and fixes this corruption. | |
| E2fsck no longer forces a sync of the filesystem (with attendant sleep | |
| calls) at all times. The ext2fs_flush() function now performs a sync | |
| only if it needed to write data blocks to disk. | |
| Fixed a minor bug in e2fsck's pass1b's file cloning function, where | |
| certain errors would not be properly reported. | |
| Updated and expanded a few points in the man pages which users | |
| complained wheren't explicit enough. | |
| Added special case byte-swapping code if compiling on the PowerPC, to | |
| accomodate the strange big-endian variant of the ext2 filesystem that | |
| was previously used on the PowerPC port. | |
| Programmer's notes: | |
| ------------------- | |
| Removed C++ keywords from the ext2fs libraries so that it could be | |
| compiled with C++. | |
| E2fsck's internal organization has now been massively reorganized so | |
| that pass*.c don't have any printf statements. Instead, all problems | |
| are reported through the fix_problem() abstraction interface. E2fsck | |
| has also been revamped so that it can be called as a library from a | |
| application. | |
| Added new fileio primitives in libext2fs for reading and writing | |
| files on an unmounted ext2 filesystem. This interface is now used by | |
| debugfs. | |
| Added a new libext2fs function for mapping logical block numbers of | |
| a file to a physical block number. | |
| Added a new libext2fs function, ext2fs_alloc_block(), which allocates | |
| a block, zeros it, and updates the filesystem accounting records | |
| appropriately. | |
| Added a new libext2fs function, ext2fs_set_bitmap_padding(), which | |
| sets the padding of the bitmap to be all one's. Used by e2fsck pass 5. | |
| The libext2fs functions now use a set of memory allocation wrapper | |
| functions: ext2fs_get_mem, ext2fs_free_mem, and ext2fs_resize_mem, | |
| instead of malloc, free, and resize. This makes it easier for us to | |
| be ported to strange environments where malloc, et. al. aren't | |
| necessarily available. | |
| Change the libext2fs fucntion to return ext2-specific error codes | |
| (EXT2_DIR_EXISTS and EXT2_DB_NOT_FOUND, for example) instead of using | |
| and depending on the existence of system error codes (such as EEXIST | |
| and ENOENT). | |
| Renamed io.h to ext2_io.h to avoid collision with other OS's header | |
| files. | |
| Add protection against ext2_io.h and ext2fs.h being included multiple | |
| times. | |
| The types used for memory lengths, etc. have been made more portable. | |
| In generla, the code has been made 16-bit safe. Added Mark | |
| Habersack's contributed DOS disk i/o routines. | |
| Miscellaneous portability fixes, including not depending on char's | |
| being signed. | |
| The io_channel structure has a new element, app_data, which is | |
| initialized by the ext2fs routines to contain a copy of the filesystem | |
| handle. | |
| ext2fs_check_directory()'s callback function may now return the error | |
| EXT2_ET_CALLBACK_NOTHANDLED if it wishes ext2fs_check_directory() to | |
| really do the checking, despite the presence of the callback function. | |
| E2fsprosg 1.11 (June 17, 1997) | |
| ============================== | |
| Fixed e2fsck to detect (previously ignored) conflicts between the | |
| superblock or block group descriptors and block bitmaps, inode | |
| bitmaps, and inode tables. | |
| Fixed bug in e2fsck so that when the message printed out when a block | |
| or inode bitmap conflicts with other data, it has the correct group | |
| number. | |
| Fixed bug in e2fsck and mke2fs where the blocksize wasn't being passed | |
| to badblocks. This meant that not all of the filesystem was being | |
| tested for bad blocks! | |
| Fixed an array boundary overrun case which cropped up in | |
| ext2fs_badblocks_list_test when a user tried running "mke2fs -c | |
| -b 4096". | |
| Adjusted the number of columns printed by mke2fs when displaying the | |
| superblock backups to avoid running over 80 columns when making a | |
| really big filesystem. | |
| Fixed up the man pages for e2fsck, debugfs, badblocks, chattr, | |
| dumpe2fs, fsck, mke2fs, and tune2fs (typos and other minor grammar | |
| fixes), thanks to some suggestions from Bill Hawes (whawes@star.net). | |
| Programmer's notes: | |
| ------------------- | |
| Fixed install rule in lib/ss so that ss_err.h is actually getting | |
| installed. | |
| Fixed bug in ext2fs_copy_bitmap; the destination bitmap wasn't getting | |
| bassed back to the caller. | |
| Fixed bug in ext2fs_inode_scan_goto_blockgroup; it had not been | |
| setting the current inode number (which meant this function wasn't | |
| working at all). | |
| Fixed bug in ext2fs_resize_generic_bitmap; it had not be zeroing all | |
| blocks in the bitmap when increasing the size of the bitmap. | |
| Changed the initial number of blocks allocated by ext2fs_init_dblist() | |
| to be more realistic. | |
| Added a new function ext2fs_allocate_group_table, which sets up the | |
| group descriptor information (and allocates inode and block bitmaps, | |
| and inode tables for a particular group). The function was created by | |
| factoring out code form ext2fs_allocate_tables(). | |
| Added a new function ext2fs_move_blocks which takes a bitmap of the | |
| blocks to be moved, and moves them to another location on the | |
| boardboard. | |
| Make the unix_io channel's io_channel_flush implementation calls sync() | |
| to to flush the kernel buffers to disk. | |
| Added a new function ext2fs_dblist_count returns the number of | |
| directory blocks in dblist. | |
| E2fsprogs 1.10 (April 24, 1997) | |
| =============================== | |
| Mke2fs once again defaults to creating revision #0 filesystems, since | |
| people were complaining about breaking compatibility with 1.2 kernels. | |
| Warning messages were added to the mke2fs and tune2fs man pages that | |
| the sparse superblock option isn't supported by most kernels yet (1.2 | |
| and 2.0 both don't support parse superblocks.) | |
| Added new flag to mke2fs, -R <raid options>, which allows the user to | |
| tell mke2fs about the RAID configuration of the filesystem. Currently | |
| the only supported raid option is "stride" which specifies the width | |
| of the RAID stripe. | |
| Fixed bug in e2fsck where pass1b would bomb out if there were any | |
| blocks marked bad in the inode table. | |
| Fixed rare bug in mke2fs where if the user had a very unlucky number | |
| of blocks in a filesystem (probability less than .002) the resulting | |
| filesystem would be corrupt in the last block group. | |
| Fixed bug where if e2fsck tried to allocate a block to fix a | |
| filesystem corruption problem and the filesystem had no free blocks, | |
| ext2fs_new_block() would loop forever. | |
| The configure script now checks explicitly to see if "-static" works, | |
| since that can't be assumed to be true --- RedHat doesn't install | |
| libc-static by default. | |
| Fixed bug in libext2's block iterator functions where under some | |
| cirmcustances, file with holes would cause the bcount parameter to the | |
| callback function to be incorrect. This bug didn't affect any of | |
| e2fsprogs programs, but it was discovered by Paul Mackerras, the | |
| author of the PPC boot loader. | |
| Removed use of static variables to store the inode cache in libext2fs. | |
| This caused problems if more than one filesystem was accessed via | |
| libext2fs (static variables in libraries are generally a bad idea). | |
| Again, this didn't affect e2fsprogs programs, but it was discovered by | |
| Paul Mackerras. | |
| Fixed minor bugs and version code drift to assure that e2fsprogs 1.10 | |
| will compile cleanly with 1.2.13 kernels (even with a.out shared | |
| libraries!) | |
| Programmer's notes: | |
| ------------------- | |
| Added new functions to duplicate an ext2 filesystem handle, and its | |
| associated substructure. New functions: ext2fs_dup_handle(), | |
| ext2fs_copy_dblist(), ext2fs_badblocks_copy(), ext2fs_copy_bitmap(). | |
| Other structures, such as the io_channel and the inode_cache, now have | |
| a ref count so that they only get freed when they are no longer used | |
| by any filesystem handle. (These functions were added as part of the | |
| development effort for an ext2 resizer). | |
| E2fsprogs 1.09 (April 14, 1997) | |
| =============================== | |
| Fixed bug in mke2fs (really in lib/ext2fs/initialize.c) which was | |
| accidentally introduced in the 1.08 release. The overhead calculation | |
| was accidentally removed, which caused ext2fs_initialize() to not | |
| notice when the filesystem size needed to be adjusted down because | |
| there wasn't enough space in the last block group. | |
| Fixed bug in version parsing library routine; it was always parsing | |
| the library version string, instead of using the passed-in string. | |
| Clarified chattr man page. | |
| E2fsprogs 1.08 (April 10, 1997) | |
| =============================== | |
| E2fsck 1.07 was very slow when checking very large filesystems with a | |
| lot of files that had hard links (i.e., news spools). This was fixed | |
| by seriously revamping the icount abstraction. Added a formal test | |
| suite for the icount abstraction. | |
| Debugfs now has a "-l" option to the "ls" command, which lists the | |
| inode number, permissions, owner, group, size, and name of the files | |
| in the directory. | |
| Fix a bug in e2fsck where when a directory had its blocks moved to | |
| another location during the pass 1b processing, the directory block | |
| list wasn't updated, so pass 2 wouldn't check (and correct) the | |
| correct directory block. | |
| E2fsck will now treat inodes which contain blocks which are claimed by | |
| the filesystem metadata by treating them as multiply claimed blocks. | |
| This way, the data in those blocks can be copied to a new block during | |
| the pass 1b--1d processing. | |
| E2fsck will attempt to determine the correct superblock number and | |
| display it in the diagnostic and warning messages if possible. | |
| Add support for a new (incompatible) feature, "sparse_super". This | |
| feature reduces the number of blocks which contain copies of backup | |
| superblocks and block group descriptors. (It is only an incompatible | |
| feature because of a bug in ext2_free_blocks.) mke2fs and tune2fs now | |
| support a new -s option; e2fsck will recognize filesystems built with | |
| this feature turned on. | |
| E2fsck now checks the library to make sure is the correct version, | |
| using new library functions. (This helps to diagnose incorrectly | |
| installed e2fsprogs distributions.) | |
| Dumpe2fs now prints more information; its now prints the the | |
| filesystem revision number, the filesystem sparse_super feature (if | |
| present), the block ranges for each block group, and the offset from | |
| the beginning of the block group. | |
| Mke2fs now distributes the inode and block bitmap blok so that the | |
| won't be concentrated in one or two disks in RAID/striping setups. | |
| Also, if the user chooses a 2k or 4k block group, mke2fs will try to | |
| choose the largest blocks per group that be chosen. (For 2k blocks, | |
| you can have up to 16384 blocks/group; for 4k blocks, you can have up | |
| to 32768 blocks/group.) Previously mke2fs would not allow | |
| specification of more than 8192 blocks per group, even if you were | |
| using a 2k or 4k block group. | |
| Programmer's notes: | |
| ------------------- | |
| Added a new function ext2fs_create_icount2() which takes a "hint" | |
| argument. This hint argument presets the icount array with the list | |
| of inodes which actually need to be in the icount array. This really | |
| helps to speed up e2fsck. | |
| Added a new function ext2fs_icount_validate() which checks the rep | |
| invariant for the icount structure. This is used mostly for testing. | |
| The error mesasage given when a bad inode number is passed to | |
| test_generic_bitmap to reflect EXT2FS_TEST_ERROR (instead of | |
| EXT2FS_UNMARK_ERROR). | |
| Added a new function ext2fs_set_dir_block which sets the block of a | |
| dblist entry, given the directory inode and blockcnt. | |
| Added a new function ext2fs_get_library_version() which returns the | |
| current library version, and ext2fs_parse_version_string() which | |
| returns a version number based on a e2fsprogs version string. | |
| The icount functions will return EINVAL if the passed in inode number | |
| is out of bounds. | |
| E2fsprogs 1.07 (March 9, 1997) | |
| ============================== | |
| E2fsck is now uses much less memory when checking really large | |
| filesystems (or rather, filesystems with a large number of inodes). | |
| Previously a filesystem with 1 million inodes required 4 megabytes of | |
| memory to store inode count statistics; that storage requirement has | |
| now been reduced to roughly half a megabyte. | |
| E2fsck can now properly deal with bad blocks appearing inside the | |
| inode table. Instead of trying to relocate the inode table (which | |
| often failed because there wasn't enough space), the inodes in the bad | |
| block are marked as in use. | |
| E2fsck will automatically try to use the backup superblocks if the | |
| primary superblocks have a bad magic number or have missing meta-data | |
| blocks (or meta-data blocks which are out of range). | |
| E2fsck's pass 3 has been made more efficient; most noticeable on | |
| filesystems with a very large number of directories. | |
| Completely revamped e2fsck's system of printing problem reports. It | |
| is now table driven, to make them more easily customizeable and | |
| extendable. Error messages which can be printed out during preen mode | |
| are now one line long. | |
| Fixed e2fsck's filesystem swapping code so that it won't try to swap | |
| fast symbolic links or deleted files. | |
| Fixed e2fsck core dumping when fixing a filesystem which has no | |
| directories (not even a root directory). | |
| Added a check to e2fsck to make sure that the length of every | |
| directory entry is a multiple of 4 (since the kernel complains if it | |
| isn't). | |
| Added a check to e2fsck to make sure that a directory entry isn't a | |
| link to the root directory, since that isn't allowed. | |
| Added a check to e2fsk to now make sure the '.' and '..' directory | |
| entries are null terminated, since the 2.0 kernel requires it. | |
| Added check to write_bitmaps() to make sure the superblock doesn't get | |
| trashed if the inode or block bitmap is marked as being block zero. | |
| Added checking of the new feature set fields in the superblock, to | |
| avoid dealing with new filesystem features that this package wasn't | |
| set up to handle. | |
| Fixed a fencepost error in ext2fs_new_block() which would occasionally | |
| try to allocate a block beyond the end of a filesystem. | |
| When the UUID library picks a random IEEE 802 address (because it | |
| can't find one from a network card), it sets the multicast bit, to | |
| avoid conflicting with a legitimate IEEE 802 address. | |
| Mke2fs now sets the root directory's owner to be the real uid of the | |
| user running mke2fs. If the real uid is non-zero, it also sets | |
| the group ownership of the root directory to be the real group-id of | |
| the user running mke2fs. | |
| Mke2fs now has more intelligent error checking when it is given a | |
| non-existent device. | |
| When badblocks is given the -vv option, it now updates the block that | |
| it is currently testing on every block. | |
| Fixed a bug in fsck where it wouldn't modify the PATH envirnoment | |
| currently correctly if PATH wasn't already set. | |
| Shared libraries now built with dependencies. This allows the shared | |
| library files to be used with dlopen(); it also makes the transition | |
| to libc 6 easier, since ld.so can tell which libc a particular shared | |
| library expects to use. | |
| Programmer's notes: | |
| ------------------- | |
| Added new abstraction (defined in dblist.c) for maintaining a list of | |
| blocks which belongs to directories. This is used in e2fsck and other | |
| programs which need to iterate over all directories. | |
| Added new functions which test to see if a contiguous range of blocks | |
| (or inodes) are available. (ext2fs_*_bitmap_range). | |
| Added new function (ext2_inode_has_valid_blocks) which returns true if | |
| an inode has valid blocks. (moved from e2fsck code). | |
| Added new function (ext2fs_allocate_tables) which allocates the | |
| meta-data blocks as part of initializing a filesystem. (moved from | |
| mke2fs code). | |
| Added a new I/O manager for testing purposes. It will either allow a | |
| program to intercept I/O requests, or print debugging messages to | |
| trace the activity of a program using the I/O manager. | |
| The badblocks_list functions now store the bad blocks in a sorted | |
| order, and use a binary search to speed up badblocks_list_test. | |
| The inode scan function ext2fs_get_next_inode() may now return a soft | |
| error returns: MISSING_INODE_TABLE and BAD_BLOCK_IN_INODE_TABLE in | |
| those cases where part of an inode table is missing or there is a bad | |
| block in the inode table. | |
| Added a new function (ext2fs_block_iterate2) which adds new arguments to | |
| the callback function to return a pointer (block and offset) to the | |
| reference of the block. | |
| Added new function (ext2fs_inode_scan_goto_blockgroup) which allows an | |
| application to jump to a particular block group while doing an inode | |
| scan. | |
| The badblocks list functions were renamed from badblocks_* to | |
| ext2fs_badblocks_*. Backwards compatibility functions are available | |
| for now, but programs should be modified to use the new interface. | |
| Some of the library functions were reorganized into separate files to | |
| reduce the size of some programs which statically link against the | |
| ext2 library. | |
| Put in some miscellaneous fixes for the Alpha platform. | |
| E2fsprogs 1.06 (October 7, 1996) | |
| ================================ | |
| Fixed serious bug in e2fsck: if the block descriptors are bad, don't | |
| smash the backup copies in ext2fs_close(). (The problem was that when | |
| e2fsck -p discovered the problem, while it was closing the filesystem | |
| and exiting, it was also blowing away the backup superblocks on the | |
| disk, which was less than friendly.) We now make it the case that we | |
| only write out the backup superblock and the back block descriptors if | |
| the filesystem is completely free from problems. | |
| Fixed a bug in block_interate in the lib/ext2fs library which caused | |
| e2fsck to fail on GNU Hurd-created filesystems. | |
| Add support for Linux/FT's bootloader, which actually uses | |
| EXT2_BOOT_LOADER, and sets its mode bits which caused e2fsck to want | |
| to clear the inode. | |
| Add support for the "A" (no atime update) attribute. (Note: this | |
| attribute is not yet in production kernels.) | |
| The test suite is not automatically run when doing a "make all" from | |
| the top level directory. Users should manually run "make check" if | |
| they wish to run the test suite. | |
| Upon a preenhalt(), make the printed message more explicit that | |
| running e2fsck "MANAULLY" means without the -p or -a options. | |
| In e2fsck, if a disconnected inode is zero-length, offer to clear it | |
| instead of offering to connect it to lost+found. | |
| In e2fsck, if a filesystem was just unmounted uncleanly, and needs | |
| e2fsck to be run over it, change e2fsck to explicitly display this | |
| fact. | |
| For dumpe2fs and e2fsck, cause the -V option to print out which | |
| version of the ext2fs library is actually getting used. (This will | |
| help detect mismatches of using a 1.06 utility with a 1.05 library, | |
| etc.) | |
| Programmers' notes: | |
| ------------------- | |
| EXT2_SWAP_BYTES was changed to EXT2_FLAG_SWAP_BYTES, which better fits | |
| the naming convention. | |
| In ext2fs_initialize(), make sure the description for the inode bitmap | |
| is correctly initialize. | |
| Fixed minor type typo in ext2fs_allocate_generic_bitmap(); | |
| E2fsprogs 1.05 (September 7, 1996) | |
| ================================== | |
| Add support for new fields in the ext2 superblock --- volume name, | |
| volume UUID, and last mounted field. Dumpe2fs displays these fields, | |
| tune2fs and mke2fs allows you to set them. E2fsck will automatically | |
| generate a UUID for those volumes that don't have them. | |
| Put in support for e2fsck to recognize HURD specific ext2 features --- | |
| most notably, the translator block. The e2fsprogs tools will now use | |
| the creator_os field in the superblock to correctly handle different | |
| OS-specific variants of the ext2 filesystem. | |
| E2fsck now fixes inodes which have a the deletion time set, but which | |
| have a non-zero i_link_count field by offering to clear the deletion | |
| time. Previously e2fsck assumed that the inode was deleted (per 0.3c | |
| ext2 kernel behavior) and offered to unlink the file. | |
| If e2fsck sets the clean bit, but nothing else, set the exit code | |
| FSCK_NONDESTRUCT. After all, e2fsck did fix a filesystem error --- it | |
| set the filesystem valid bit when it was previously cleared. :-) This | |
| was needed to make the HURD fsck driver happy. | |
| If the user refuses to attach an unattached inode, e2fsck will no | |
| longer set the inode's link count. Otherwise, the inode would end up | |
| getting marked as unused, which might cause loss of data later. | |
| Make the message issued by e2fsck when the superblock is corrupt less | |
| confusing for users. It now mentions that another reason for the | |
| "corrupt superblock" message might be that the partition might not be | |
| an ext2 filesystem at all (it might swap, msdos filesystem, ufs, etc.) | |
| Make the libext2 library more robuest so that e2fsck won't coredump on | |
| an illegal superblock where the blocksize is zero. (f_crashdisk is | |
| the test case). | |
| By default, create filesystems where the default checkinterval is 6 | |
| months (180 days). Linux servers can be robust enough that 20 reboots | |
| can be a long, long time. | |
| Added configure flag --enable-old-bitops, which forces the bitops to | |
| use the old (native) bitmask operations. By default on the sparc | |
| platform, the standard ext2 bit ordering is now used. | |
| Added a new feature to e2fsck to byte-swap filesystems; this can be | |
| used to convert old m68k filesystems to use the standard byte-order | |
| storage for the superblock, inodes, and directory blocks. This | |
| function is invoked by using the '-s' option to e2fsck. | |
| Debugfs's "dump" command has been enhanced so that it writes out the | |
| exact size of the file so that the nulls at the end of the file are | |
| eliminated. The command also accept a new "-p" option which will | |
| attempt preserve to preserve the ownernship, permissions, and | |
| file modification/access times. | |
| Debugfs has two new options, -f and -R. The -R option allows the user | |
| to execute a single debugfs command from the command line. The -f | |
| option allows the user to specify a "command file" containing debugfs | |
| commands which will get executed. | |
| Dumpe2fs now pretty prints the check interval, instead of just | |
| printing the check interval as a number of seconds. | |
| Fix bugs in debugfs: the params command when no filesystem is opened | |
| no longer causes a core dump. It is now possible to unlink a file | |
| when a pathame containing a '/' is specified. | |
| Tune2fs has a new -C option which sets the number of times the | |
| filesystem has been mounted. | |
| Fix the chattr '-v' option so that it actually works. Chattr was | |
| being buggy about the -v option parsing. | |
| Programmers' notes: | |
| ------------------- | |
| The directory lib/uuid contains a set of library routines to generate | |
| DCE compatible UUIDs. | |
| Extended ext2fs_namei() to handle symbolic links. Added new function | |
| ext2fs_nami_follow() which will follow last symbolic link in the case | |
| where the pathname points to a sym link. | |
| The ext2fs_block_iterate function will now return the HURD translator | |
| block, if present. The new flag BLOCK_FLAG_DATA_ONLY will cause the | |
| iterator to return data blocks only. The ext2fs.h file now defines | |
| constants BLOCK_COUNT_IND, BLOCK_COUNT_DIND, BLOCK_COUNT_TIND, and | |
| BLOCK_COUNT_TRANSLATOR, which are the magic values passed in the block | |
| count field of the iterator callback function. | |
| The test script driver now takes an optional second argument, which is | |
| the test case to be run. This allows you to run a test case without | |
| needing to run the entire test suite. | |
| On Linux ELF systems, install the .so files in the correct places | |
| (/usr/lib). The .so files must be stored in the same directory as the | |
| .a files. | |
| Fixed miscellaneous HURD compilation issues with header file being | |
| included in the right order. | |
| Fixed debugfs so that it resets optind to zero, not one, since setting | |
| optind to zero is more correct. | |
| E2fsprogs 1.04 (May 16, 1996) | |
| ============================= | |
| First "official" (1.03 was a limited release only) to support building | |
| e2fsprogs under Linux 2.0 kernels (as well as late model 1.3 and 1.99 | |
| kernels). | |
| This package includes a RPM specs file, that it can be built using the | |
| RedHat Package Manager. | |
| E2fsck now prints a hint that if there are lots of incorrectly located | |
| inode bitmaps, block bitmaps, and inode table blocks, the user might | |
| want to try using e2fsck -b 8193 first, to see if that fares any | |
| better. | |
| For ext2 filesystem written with the hurd, debugfs will now print out | |
| the translator field when printing an inode structure. | |
| Lots of miscellaneous linking/installation cleanups: | |
| Libraries are now linked using a relative pathname, instead of | |
| relying on -L working correct. It doesn't, in many cases, including | |
| current versions of GNU ld. This guarantees that the build tree is | |
| linking with the right libraries, instead of the ones installed in | |
| /usr/lib. | |
| Header files, man pages, and the et/ss shell scripts are now | |
| generated using a custom substitution script, instead of relying on | |
| the configure script. This prevents needless recompilation of | |
| files; in addition, the custom substitution script is much faster. | |
| e2fsck may now be linked dynamically, by using the | |
| --enable-dynamic-e2fsck flag to configure. This is not recommended, | |
| since it increases e2fsck's dependence on other files, but some | |
| people need to save disk space, and other critical programs on their | |
| systems were being linked dynamically anyway. | |
| Programs such as fsck which didn't need to be linked against | |
| libext2fs (or mke2fs which didn't need to be linked against libe2p) | |
| only link against libraries they actually need. Otherwise, those | |
| programs would require the presense of libraries that otherwise | |
| could be removed from a rescuse diskette. | |
| The ss include files are now installed correctly so they can | |
| actually be used by another package. | |
| If the profiling libraries are built, they are now installed on a | |
| "make install-libs". | |
| E2fsprogs 1.03 (March 27, 1996) | |
| =============================== | |
| Change the m68k bit numbering for bitmasks to match the bit numbering | |
| used by all other ext2 implementations. (This change was requested by | |
| the m68k kernel development team.) | |
| Support (in-development) filesystem format revision which supports | |
| (among other things) dynamically sized inodes. | |
| Fixed a bug in the ext2 library so that an intelligent error is | |
| returned if mke2fs is run with a ridiculously small number of blocks | |
| for a partition. | |
| Fixed a bug in the ext2 library which required that the device be | |
| openable in read/write mode in order to determine its size. This | |
| caused e2fsck -n to require read/write access when it was not | |
| previously necessary. | |
| Fixed a bug in e2fsck which casued it to occasionally fail the test | |
| suite depending on which version of the floating point library it was | |
| using. | |
| Fixed a bug in e2fsck so that it now halts with a fatal error when | |
| certain superblock consistency checks fail. Previously it continued | |
| running e2fsck, with some potential confusing/damaging consequences. | |
| Added new flag to fsck which allows the root to be checked in parallel | |
| with other filesytems. This is not the safest thing in the world to | |
| do, but some system administrators really wanted it. | |
| Fixed -Wall flames in lib/ss. | |
| E2fsprogs 1.02 (January 16, 1996) | |
| ================================= | |
| Fix to allow e2fsprogs to be compiled on recent 1.3 (pl45+) kernels. | |
| Change e2fsck to print statistics of how many non-contiguous files are | |
| on the system. Note that a file which is larger than 8k blocks, it is | |
| guaranteed to be non-contiguous. | |
| In mke2fs, print a warning message if a user tries to format a whole | |
| disk (/dev/hda versus /dev/hda1). If a user really wants to format a | |
| whole disk, the -F (force) option forces mke2fs to format a whole disk | |
| as a filesytem. | |
| Fix a bug in fsck where in some cases it might start checking | |
| partitions in the next pass before it finishes checking partitions in | |
| the current pass. This still won't cause two partitions on the same | |
| disk will be checked, so it's rarely a problem in real life. | |
| Patch lsattr so that it won't hang when checking a named pipe. | |
| Minor compilation fixes: | |
| * Fix the order of libraries that were linked in debugfs. | |
| * Allow the sources to be compiled with -ansi turned on. |