Makefile.in

# Makefile.in generated by automake 1.15 from Makefile.am.
# @configure_input@

# Copyright (C) 1994-2014 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# GLIB - Library of useful C routines




VPATH = @srcdir@
am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
installed_test_PROGRAMS = $(am__EXEEXT_1)
noinst_PROGRAMS = $(am__EXEEXT_3)
check_PROGRAMS = $(am__EXEEXT_2)
TESTS = $(am__EXEEXT_1) $(am__append_15)
@OS_WIN32_TRUE@am__append_1 = $(test_programs) $(test_scripts) $(uninstalled_test_programs) $(uninstalled_test_scripts) \
@OS_WIN32_TRUE@         $(dist_test_scripts) $(dist_uninstalled_test_scripts)

@ENABLE_ALWAYS_BUILD_TESTS_TRUE@am__append_2 = $(all_test_ltlibs)
@ENABLE_ALWAYS_BUILD_TESTS_TRUE@am__append_3 = $(all_test_programs)
@ENABLE_ALWAYS_BUILD_TESTS_TRUE@am__append_4 = $(all_test_scripts)
@ENABLE_ALWAYS_BUILD_TESTS_TRUE@am__append_5 = $(all_test_data)
@ENABLE_ALWAYS_BUILD_TESTS_FALSE@am__append_6 = $(all_test_ltlibs)
@ENABLE_ALWAYS_BUILD_TESTS_FALSE@am__append_7 = $(all_test_programs)
@ENABLE_ALWAYS_BUILD_TESTS_FALSE@am__append_8 = $(all_test_scripts)
@ENABLE_ALWAYS_BUILD_TESTS_FALSE@am__append_9 = $(all_test_data)
@ENABLE_INSTALLED_TESTS_TRUE@am__append_10 = $(test_programs) $(installed_test_programs) \
@ENABLE_INSTALLED_TESTS_TRUE@                          $(test_extra_programs) $(installed_test_extra_programs)

@ENABLE_INSTALLED_TESTS_TRUE@am__append_11 = $(test_scripts) \
@ENABLE_INSTALLED_TESTS_TRUE@	$(installed_test_scripts) \
@ENABLE_INSTALLED_TESTS_TRUE@	$(test_extra_scripts) \
@ENABLE_INSTALLED_TESTS_TRUE@	$(test_installed_extra_scripts) \
@ENABLE_INSTALLED_TESTS_TRUE@	$(dist_test_scripts) \
@ENABLE_INSTALLED_TESTS_TRUE@	$(dist_test_extra_scripts) \
@ENABLE_INSTALLED_TESTS_TRUE@	$(dist_installed_test_scripts) \
@ENABLE_INSTALLED_TESTS_TRUE@	$(dist_installed_test_extra_scripts)
@ENABLE_INSTALLED_TESTS_TRUE@am__append_12 = $(test_data) \
@ENABLE_INSTALLED_TESTS_TRUE@	$(installed_test_data) \
@ENABLE_INSTALLED_TESTS_TRUE@	$(dist_test_data) \
@ENABLE_INSTALLED_TESTS_TRUE@	$(dist_installed_test_data)
@ENABLE_INSTALLED_TESTS_TRUE@am__append_13 = $(test_ltlibraries) $(installed_test_ltlibraries)
@ENABLE_INSTALLED_TESTS_TRUE@am__append_14 = $(installed_test_meta_DATA)
@OS_LINUX_TRUE@am__append_15 = check-abis.sh
@OS_UNIX_TRUE@am__append_16 = gio-unix-2.0.pc
@OS_WIN32_TRUE@am__append_17 = gio-windows-2.0.pc
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4macros/attributes.m4 \
	$(top_srcdir)/m4macros/glibtests.m4 \
	$(top_srcdir)/m4macros/gtk-doc.m4 \
	$(top_srcdir)/m4macros/libtool.m4 \
	$(top_srcdir)/m4macros/ltoptions.m4 \
	$(top_srcdir)/m4macros/ltsugar.m4 \
	$(top_srcdir)/m4macros/ltversion.m4 \
	$(top_srcdir)/m4macros/lt~obsolete.m4 \
	$(top_srcdir)/acinclude.m4 $(top_srcdir)/acglib.m4 \
	$(top_srcdir)/glib/libcharset/codeset.m4 \
	$(top_srcdir)/glib/libcharset/glibc21.m4 \
	$(top_srcdir)/m4macros/glib-gettext.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
	$(am__configure_deps) $(am__DIST_COMMON)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = glib-2.0.pc gmodule-2.0.pc gmodule-export-2.0.pc \
	gmodule-no-export-2.0.pc gthread-2.0.pc gobject-2.0.pc \
	gio-2.0.pc gio-unix-2.0.pc gio-windows-2.0.pc glib-zip \
	glib-gettextize INSTALL README config.h.win32
CONFIG_CLEAN_VPATH_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
am__installdirs = "$(DESTDIR)$(installed_testdir)" \
	"$(DESTDIR)$(installed_testdir)" "$(DESTDIR)$(bindir)" \
	"$(DESTDIR)$(installed_testdir)" \
	"$(DESTDIR)$(installed_test_metadir)" \
	"$(DESTDIR)$(installed_testdir)" "$(DESTDIR)$(pkgconfigdir)"
LTLIBRARIES = $(installed_test_LTLIBRARIES) $(noinst_LTLIBRARIES)
am__EXEEXT_1 =
@ENABLE_ALWAYS_BUILD_TESTS_FALSE@am__EXEEXT_2 = $(am__EXEEXT_1)
@ENABLE_ALWAYS_BUILD_TESTS_TRUE@am__EXEEXT_3 = $(am__EXEEXT_1)
PROGRAMS = $(installed_test_PROGRAMS) $(noinst_PROGRAMS)
SCRIPTS = $(bin_SCRIPTS) $(installed_test_SCRIPTS) $(noinst_SCRIPTS)
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 = 
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
	ctags-recursive dvi-recursive html-recursive info-recursive \
	install-data-recursive install-dvi-recursive \
	install-exec-recursive install-html-recursive \
	install-info-recursive install-pdf-recursive \
	install-ps-recursive install-recursive installcheck-recursive \
	installdirs-recursive pdf-recursive ps-recursive \
	tags-recursive uninstall-recursive
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
DATA = $(installed_test_meta_DATA) $(nobase_installed_test_DATA) \
	$(noinst_DATA) $(pkgconfig_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
  $(RECURSIVE_TARGETS) \
  $(RECURSIVE_CLEAN_TARGETS) \
  $(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
	cscope check recheck distdir dist dist-all distcheck
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
	$(LISP)config.h.in
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates.  Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
  BEGIN { nonempty = 0; } \
  { items[$$0] = 1; nonempty = 1; } \
  END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique.  This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
  list='$(am__tagged_files)'; \
  unique=`for i in $$list; do \
    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
CSCOPE = cscope
am__tty_colors_dummy = \
  mgn= red= grn= lgn= blu= brg= std=; \
  am__color_tests=no
am__tty_colors = { \
  $(am__tty_colors_dummy); \
  if test "X$(AM_COLOR_TESTS)" = Xno; then \
    am__color_tests=no; \
  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
    am__color_tests=yes; \
  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
    am__color_tests=yes; \
  fi; \
  if test $$am__color_tests = yes; then \
    red=''; \
    grn=''; \
    lgn=''; \
    blu=''; \
    mgn=''; \
    brg=''; \
    std=''; \
  fi; \
}
am__recheck_rx = ^[ 	]*:recheck:[ 	]*
am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
# A command that, given a newline-separated list of test names on the
# standard input, print the name of the tests that are to be re-run
# upon "make recheck".
am__list_recheck_tests = $(AWK) '{ \
  recheck = 1; \
  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
    { \
      if (rc < 0) \
        { \
          if ((getline line2 < ($$0 ".log")) < 0) \
	    recheck = 0; \
          break; \
        } \
      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
        { \
          recheck = 0; \
          break; \
        } \
      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
        { \
          break; \
        } \
    }; \
  if (recheck) \
    print $$0; \
  close ($$0 ".trs"); \
  close ($$0 ".log"); \
}'
# A command that, given a newline-separated list of test names on the
# standard input, create the global log from their .trs and .log files.
am__create_global_log = $(AWK) ' \
function fatal(msg) \
{ \
  print "fatal: making $@: " msg | "cat >&2"; \
  exit 1; \
} \
function rst_section(header) \
{ \
  print header; \
  len = length(header); \
  for (i = 1; i <= len; i = i + 1) \
    printf "="; \
  printf "\n\n"; \
} \
{ \
  copy_in_global_log = 1; \
  global_test_result = "RUN"; \
  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
    { \
      if (rc < 0) \
         fatal("failed to read from " $$0 ".trs"); \
      if (line ~ /$(am__global_test_result_rx)/) \
        { \
          sub("$(am__global_test_result_rx)", "", line); \
          sub("[ 	]*$$", "", line); \
          global_test_result = line; \
        } \
      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
        copy_in_global_log = 0; \
    }; \
  if (copy_in_global_log) \
    { \
      rst_section(global_test_result ": " $$0); \
      while ((rc = (getline line < ($$0 ".log"))) != 0) \
      { \
        if (rc < 0) \
          fatal("failed to read from " $$0 ".log"); \
        print line; \
      }; \
      printf "\n"; \
    }; \
  close ($$0 ".trs"); \
  close ($$0 ".log"); \
}'
# Restructured Text title.
am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
# Solaris 10 'make', and several other traditional 'make' implementations,
# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
# by disabling -e (using the XSI extension "set +e") if it's set.
am__sh_e_setup = case $$- in *e*) set +e;; esac
# Default flags passed to test drivers.
am__common_driver_flags = \
  --color-tests "$$am__color_tests" \
  --enable-hard-errors "$$am__enable_hard_errors" \
  --expect-failure "$$am__expect_failure"
# To be inserted before the command running the test.  Creates the
# directory for the log if needed.  Stores in $dir the directory
# containing $f, in $tst the test, in $log the log.  Executes the
# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
# will run the test scripts (or their associated LOG_COMPILER, if
# thy have one).
am__check_pre = \
$(am__sh_e_setup);					\
$(am__vpath_adj_setup) $(am__vpath_adj)			\
$(am__tty_colors);					\
srcdir=$(srcdir); export srcdir;			\
case "$@" in						\
  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
    *) am__odir=.;; 					\
esac;							\
test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
if test -f "./$$f"; then dir=./;			\
elif test -f "$$f"; then dir=;				\
else dir="$(srcdir)/"; fi;				\
tst=$$dir$$f; log='$@'; 				\
if test -n '$(DISABLE_HARD_ERRORS)'; then		\
  am__enable_hard_errors=no; 				\
else							\
  am__enable_hard_errors=yes; 				\
fi; 							\
case " $(XFAIL_TESTS) " in				\
  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
    am__expect_failure=yes;;				\
  *)							\
    am__expect_failure=no;;				\
esac; 							\
$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
# A shell command to get the names of the tests scripts with any registered
# extension removed (i.e., equivalently, the names of the test logs, with
# the '.log' extension removed).  The result is saved in the shell variable
# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
# since that might cause problem with VPATH rewrites for suffix-less tests.
# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
am__set_TESTS_bases = \
  bases='$(TEST_LOGS)'; \
  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
  bases=`echo $$bases`
RECHECK_LOGS = $(TEST_LOGS)
TEST_SUITE_LOG = test-suite.log
TEST_EXTENSIONS = @EXEEXT@ .test
LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver
LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
am__set_b = \
  case '$@' in \
    */*) \
      case '$*' in \
        */*) b='$*';; \
          *) b=`echo '$@' | sed 's/\.log$$//'`; \
       esac;; \
    *) \
      b='$*';; \
  esac
am__test_logs1 = $(TESTS:=.log)
am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
TEST_LOGS = $(am__test_logs2:.test.log=.log)
TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver
TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \
	$(TEST_LOG_FLAGS)
am__DIST_COMMON = $(srcdir)/INSTALL.in $(srcdir)/Makefile.in \
	$(srcdir)/README.in $(srcdir)/config.h.in \
	$(srcdir)/config.h.win32.in $(srcdir)/gio-2.0.pc.in \
	$(srcdir)/gio-unix-2.0.pc.in $(srcdir)/gio-windows-2.0.pc.in \
	$(srcdir)/glib-2.0.pc.in $(srcdir)/glib-gettextize.in \
	$(srcdir)/glib-zip.in $(srcdir)/gmodule-2.0.pc.in \
	$(srcdir)/gmodule-export-2.0.pc.in \
	$(srcdir)/gmodule-no-export-2.0.pc.in \
	$(srcdir)/gobject-2.0.pc.in $(srcdir)/gthread-2.0.pc.in \
	$(top_srcdir)/glib.mk AUTHORS COPYING ChangeLog INSTALL NEWS \
	README compile config.guess config.sub install-sh ltmain.sh \
	missing test-driver
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  if test -d "$(distdir)"; then \
    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
      && rm -rf "$(distdir)" \
      || { sleep 5 && rm -rf "$(distdir)"; }; \
  else :; fi
am__post_remove_distdir = $(am__remove_distdir)
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
GZIP_ENV = --best
DIST_ARCHIVES = $(distdir).tar.xz
DIST_TARGETS = dist-xz
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ABS_TAPSET_DIR = @ABS_TAPSET_DIR@
ACLOCAL = @ACLOCAL@
ALLOCA = @ALLOCA@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AS = @AS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CARBON_LIBS = @CARBON_LIBS@
CATALOGS = @CATALOGS@
CATOBJEXT = @CATOBJEXT@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
COCOA_LIBS = @COCOA_LIBS@
CONFIG_STATUS_DEPENDENCIES = @CONFIG_STATUS_DEPENDENCIES@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DATADIRNAME = @DATADIRNAME@
DBUS1_CFLAGS = @DBUS1_CFLAGS@
DBUS1_LIBS = @DBUS1_LIBS@
DBUS_DAEMON = @DBUS_DAEMON@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DTRACE = @DTRACE@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FAM_LIBS = @FAM_LIBS@
FGREP = @FGREP@
GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
GIO = @GIO@
GIO_MODULE_DIR = @GIO_MODULE_DIR@
GLIBC21 = @GLIBC21@
GLIB_BINARY_AGE = @GLIB_BINARY_AGE@
GLIB_DEBUG_FLAGS = @GLIB_DEBUG_FLAGS@
GLIB_EXTRA_CFLAGS = @GLIB_EXTRA_CFLAGS@
GLIB_HIDDEN_VISIBILITY_CFLAGS = @GLIB_HIDDEN_VISIBILITY_CFLAGS@
GLIB_INTERFACE_AGE = @GLIB_INTERFACE_AGE@
GLIB_LINK_FLAGS = @GLIB_LINK_FLAGS@
GLIB_MAJOR_VERSION = @GLIB_MAJOR_VERSION@
GLIB_MICRO_VERSION = @GLIB_MICRO_VERSION@
GLIB_MINOR_VERSION = @GLIB_MINOR_VERSION@
GLIB_RUNTIME_LIBDIR = @GLIB_RUNTIME_LIBDIR@
GLIB_VERSION = @GLIB_VERSION@
GLIB_WARN_CFLAGS = @GLIB_WARN_CFLAGS@
GLIB_WIN32_STATIC_COMPILATION_DEFINE = @GLIB_WIN32_STATIC_COMPILATION_DEFINE@
GMOFILES = @GMOFILES@
GMSGFMT = @GMSGFMT@
GREP = @GREP@
GSPAWN = @GSPAWN@
GTHREAD_COMPILE_IMPL_DEFINES = @GTHREAD_COMPILE_IMPL_DEFINES@
GTKDOC_CHECK = @GTKDOC_CHECK@
GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@
GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@
GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@
GTKDOC_MKPDF = @GTKDOC_MKPDF@
GTKDOC_REBASE = @GTKDOC_REBASE@
G_LIBS_EXTRA = @G_LIBS_EXTRA@
G_MODULE_BROKEN_RTLD_GLOBAL = @G_MODULE_BROKEN_RTLD_GLOBAL@
G_MODULE_HAVE_DLERROR = @G_MODULE_HAVE_DLERROR@
G_MODULE_IMPL = @G_MODULE_IMPL@
G_MODULE_LDFLAGS = @G_MODULE_LDFLAGS@
G_MODULE_LIBS = @G_MODULE_LIBS@
G_MODULE_LIBS_EXTRA = @G_MODULE_LIBS_EXTRA@
G_MODULE_NEED_USCORE = @G_MODULE_NEED_USCORE@
G_MODULE_PLUGIN_LIBS = @G_MODULE_PLUGIN_LIBS@
G_MODULE_SUPPORTED = @G_MODULE_SUPPORTED@
G_THREAD_CFLAGS = @G_THREAD_CFLAGS@
G_THREAD_LIBS = @G_THREAD_LIBS@
G_THREAD_LIBS_EXTRA = @G_THREAD_LIBS_EXTRA@
G_THREAD_LIBS_FOR_GTHREAD = @G_THREAD_LIBS_FOR_GTHREAD@
HTML_DIR = @HTML_DIR@
ICONV_LIBS = @ICONV_LIBS@
INDENT = @INDENT@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTOBJEXT = @INSTOBJEXT@
INTLLIBS = @INTLLIBS@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBELF_CFLAGS = @LIBELF_CFLAGS@
LIBELF_LIBS = @LIBELF_LIBS@
LIBFFI_CFLAGS = @LIBFFI_CFLAGS@
LIBFFI_LIBS = @LIBFFI_LIBS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBSYSTEMD_CFLAGS = @LIBSYSTEMD_CFLAGS@
LIBSYSTEMD_LIBS = @LIBSYSTEMD_LIBS@
LIBTOOL = @LIBTOOL@
LIB_EXE_MACHINE_FLAG = @LIB_EXE_MACHINE_FLAG@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
LTP = @LTP@
LTP_GENHTML = @LTP_GENHTML@
LT_AGE = @LT_AGE@
LT_CURRENT = @LT_CURRENT@
LT_CURRENT_MINUS_AGE = @LT_CURRENT_MINUS_AGE@
LT_RELEASE = @LT_RELEASE@
LT_REVISION = @LT_REVISION@
LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
MSGFMT_OPTS = @MSGFMT_OPTS@
NAMESER_COMPAT_INCLUDE = @NAMESER_COMPAT_INCLUDE@
NETWORK_LIBS = @NETWORK_LIBS@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PCRE_CFLAGS = @PCRE_CFLAGS@
PCRE_LIBS = @PCRE_LIBS@
PCRE_REQUIRES = @PCRE_REQUIRES@
PCRE_WARN_CFLAGS = @PCRE_WARN_CFLAGS@
PERL = @PERL@
PERL_PATH = @PERL_PATH@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
PLATFORMDEP = @PLATFORMDEP@
POFILES = @POFILES@
POSUB = @POSUB@
PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@
PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@
PYTHON = @PYTHON@
PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
PYTHON_PLATFORM = @PYTHON_PLATFORM@
PYTHON_PREFIX = @PYTHON_PREFIX@
PYTHON_VERSION = @PYTHON_VERSION@
RANLIB = @RANLIB@
REBUILD = @REBUILD@
SED = @SED@
SELINUX_LIBS = @SELINUX_LIBS@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SHTOOL = @SHTOOL@
STRIP = @STRIP@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
WINDRES = @WINDRES@
WSPIAPI_INCLUDE = @WSPIAPI_INCLUDE@
XATTR_LIBS = @XATTR_LIBS@
XGETTEXT = @XGETTEXT@
XMLCATALOG = @XMLCATALOG@
XML_CATALOG_FILE = @XML_CATALOG_FILE@
XSLTPROC = @XSLTPROC@
ZLIB_CFLAGS = @ZLIB_CFLAGS@
ZLIB_LIBS = @ZLIB_LIBS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
config_h_INCLUDES = @config_h_INCLUDES@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
gio_INCLUDES = @gio_INCLUDES@
glib_INCLUDES = @glib_INCLUDES@
gmodule_INCLUDES = @gmodule_INCLUDES@
gobject_INCLUDES = @gobject_INCLUDES@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
installed_test_metadir = @installed_test_metadir@
installed_testdir = @installed_testdir@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
ms_librarian = @ms_librarian@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
pkgpyexecdir = @pkgpyexecdir@
pkgpythondir = @pkgpythondir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@

#GTESTER = gtester 			# for non-GLIB packages
#GTESTER_REPORT = gtester-report        # for non-GLIB packages
GTESTER = $(top_builddir)/glib/gtester			# for the GLIB package
GTESTER_REPORT = $(top_builddir)/glib/gtester-report	# for the GLIB package
NULL = 

# initialize variables for unconditional += appending
BUILT_SOURCES = 

# These may be in the builddir too
BUILT_EXTRA_DIST = README INSTALL ChangeLog config.h.win32 $(NULL)
CLEANFILES = *.log *.trs $(am__append_14)
DISTCLEANFILES = config.lt
MAINTAINERCLEANFILES = 
EXTRA_DIST = $(all_dist_test_scripts) $(all_dist_test_data) \
	ChangeLog.pre-2-20 ChangeLog.pre-2-18 ChangeLog.pre-2-16 \
	ChangeLog.pre-2-14 ChangeLog.pre-2-12 ChangeLog.pre-2-10 \
	ChangeLog.pre-2-8 ChangeLog.pre-2-6 ChangeLog.pre-2-4 \
	ChangeLog.pre-2-2 ChangeLog.pre-2-0 ChangeLog.pre-1-2 \
	glib-zip.in NEWS.pre-1-3 acglib.m4 sanity_check README.commits \
	README.in README.rationale INSTALL.in README.win32 HACKING \
	autogen.sh glib.mk glib-tap.mk tap-driver.sh tap-test \
	makefile.msc msvc_recommended_pragmas.h config.h.win32.in \
	po/po2tbl.sed.in glib-2.0.pc.in gobject-2.0.pc.in \
	gmodule-2.0.pc.in gmodule-export-2.0.pc.in \
	gmodule-no-export-2.0.pc.in gthread-2.0.pc.in gio-2.0.pc.in \
	gio-unix-2.0.pc.in gio-windows-2.0.pc.in check-abis.sh \
	gtk-doc.make $(NULL)

# We support a fairly large range of possible variables.  It is expected that all types of files in a test suite
# will belong in exactly one of the following variables.
#
# First, we support the usual automake suffixes, but in lowercase, with the customary meaning:
#
#   test_programs, test_scripts, test_data, test_ltlibraries
#
# The above are used to list files that are involved in both uninstalled and installed testing.  The
# test_programs and test_scripts are taken to be actual testcases and will be run as part of the test suite.
# Note that _data is always used with the nobase_ automake variable name to ensure that installed test data is
# installed in the same way as it appears in the package layout.
#
# In order to mark a particular file as being only for one type of testing, use 'installed' or 'uninstalled',
# like so:
#
#   installed_test_programs, uninstalled_test_programs
#   installed_test_scripts, uninstalled_test_scripts
#   installed_test_data, uninstalled_test_data
#   installed_test_ltlibraries, uninstalled_test_ltlibraries
#
# Additionally, we support 'extra' infixes for programs and scripts.  This is used for support programs/scripts
# that should not themselves be run as testcases (but exist to be used from other testcases):
#
#   test_extra_programs, installed_test_extra_programs, uninstalled_test_extra_programs
#   test_extra_scripts, installed_test_extra_scripts, uninstalled_test_extra_scripts
#
# Additionally, for _scripts and _data, we support the customary dist_ prefix so that the named script or data
# file automatically end up in the tarball.
#
#   dist_test_scripts, dist_test_data, dist_test_extra_scripts
#   dist_installed_test_scripts, dist_installed_test_data, dist_installed_test_extra_scripts
#   dist_uninstalled_test_scripts, dist_uninstalled_test_data, dist_uninstalled_test_extra_scripts
#
# Note that no file is automatically disted unless it appears in one of the dist_ variables.  This follows the
# standard automake convention of not disting programs scripts or data by default.
#
# test_programs, test_scripts, uninstalled_test_programs and uninstalled_test_scripts (as well as their disted
# variants) will be run as part of the in-tree 'make check'.  These are all assumed to be runnable under
# gtester.  That's a bit strange for scripts, but it's possible.

# we use test -z "$(TEST_PROGS)" above, so make sure we have no extra whitespace...
TEST_PROGS = $(strip $(test_programs) $(test_scripts) \
	$(uninstalled_test_programs) $(uninstalled_test_scripts) \
	$(dist_test_scripts) $(dist_uninstalled_test_scripts))
installed_test_LTLIBRARIES = $(am__append_13)
installed_test_SCRIPTS = $(am__append_11)
nobase_installed_test_DATA = $(am__append_12)
noinst_LTLIBRARIES = $(am__append_2)
noinst_SCRIPTS = $(am__append_4)
noinst_DATA = $(am__append_5)
check_LTLIBRARIES = $(am__append_6)
check_SCRIPTS = $(am__append_8)
check_DATA = $(am__append_9)

# Note: build even the installed-only targets during 'make check' to ensure that they still work.
# We need to do a bit of trickery here and manage disting via EXTRA_DIST instead of using dist_ prefixes to
# prevent automake from mistreating gmake functions like $(wildcard ...) and $(addprefix ...) as if they were
# filenames, including removing duplicate instances of the opening part before the space, eg. '$(addprefix'.
all_test_programs = $(test_programs) $(uninstalled_test_programs) $(installed_test_programs) \
                        $(test_extra_programs) $(uninstalled_test_extra_programs) $(installed_test_extra_programs)

all_test_scripts = $(test_scripts) $(uninstalled_test_scripts) \
	$(installed_test_scripts) $(test_extra_scripts) \
	$(uninstalled_test_extra_scripts) \
	$(installed_test_extra_scripts) $(all_dist_test_scripts)
all_dist_test_scripts = $(dist_test_scripts) $(dist_uninstalled_test_scripts) $(dist_installed_test_scripts) \
                        $(dist_test_extra_scripts) $(dist_uninstalled_test_extra_scripts) $(dist_installed_test_extra_scripts)

all_test_data = $(test_data) $(uninstalled_test_data) \
	$(installed_test_data) $(all_dist_test_data)
all_dist_test_data = $(dist_test_data) $(dist_uninstalled_test_data) $(dist_installed_test_data)
all_test_ltlibs = $(test_ltlibraries) $(uninstalled_test_ltlibraries) $(installed_test_ltlibraries)
@ENABLE_INSTALLED_TESTS_TRUE@installed_testcases = $(test_programs) $(installed_test_programs) \
@ENABLE_INSTALLED_TESTS_TRUE@                      $(test_scripts) $(installed_test_scripts) \
@ENABLE_INSTALLED_TESTS_TRUE@                      $(dist_test_scripts) $(dist_installed_test_scripts)

@ENABLE_INSTALLED_TESTS_TRUE@installed_test_meta_DATA = $(installed_testcases:=.test)
ACLOCAL_AMFLAGS = -I m4macros ${ACLOCAL_FLAGS}
SUBDIRS = . m4macros glib gmodule gthread gobject gio po docs tests
DIST_SUBDIRS = $(SUBDIRS) build
bin_SCRIPTS = glib-gettextize
AM_CPPFLAGS = \
	-DG_LOG_DOMAIN=g_log_domain_glib 	\
	@GLIB_DEBUG_FLAGS@ 			\
	-DG_DISABLE_DEPRECATED 			\
	-DGLIB_COMPILATION

CONFIGURE_DEPENDENCIES = acglib.m4
pkgconfigdir = $(libdir)/pkgconfig
pkgconfig_DATA = glib-2.0.pc gobject-2.0.pc gmodule-2.0.pc \
	gmodule-export-2.0.pc gmodule-no-export-2.0.pc gthread-2.0.pc \
	gio-2.0.pc $(am__append_16) $(am__append_17)

# build documentation when doing distcheck
DISTCHECK_CONFIGURE_FLAGS = --enable-debug --enable-gtk-doc --enable-man --disable-maintainer-mode
all: $(BUILT_SOURCES) config.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:
.SUFFIXES: .log .test .test$(EXEEXT) .trs
am--refresh: Makefile
	@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/glib.mk $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
	      $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --gnu Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
	esac;
$(top_srcdir)/glib.mk $(am__empty):

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):

config.h: stamp-h1
	@test -f $@ || rm -f stamp-h1
	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1

stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
	@rm -f stamp-h1
	cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
	rm -f stamp-h1
	touch $@

distclean-hdr:
	-rm -f config.h stamp-h1
glib-2.0.pc: $(top_builddir)/config.status $(srcdir)/glib-2.0.pc.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
gmodule-2.0.pc: $(top_builddir)/config.status $(srcdir)/gmodule-2.0.pc.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
gmodule-export-2.0.pc: $(top_builddir)/config.status $(srcdir)/gmodule-export-2.0.pc.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
gmodule-no-export-2.0.pc: $(top_builddir)/config.status $(srcdir)/gmodule-no-export-2.0.pc.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
gthread-2.0.pc: $(top_builddir)/config.status $(srcdir)/gthread-2.0.pc.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
gobject-2.0.pc: $(top_builddir)/config.status $(srcdir)/gobject-2.0.pc.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
gio-2.0.pc: $(top_builddir)/config.status $(srcdir)/gio-2.0.pc.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
gio-unix-2.0.pc: $(top_builddir)/config.status $(srcdir)/gio-unix-2.0.pc.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
gio-windows-2.0.pc: $(top_builddir)/config.status $(srcdir)/gio-windows-2.0.pc.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
glib-zip: $(top_builddir)/config.status $(srcdir)/glib-zip.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
glib-gettextize: $(top_builddir)/config.status $(srcdir)/glib-gettextize.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
INSTALL: $(top_builddir)/config.status $(srcdir)/INSTALL.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
README: $(top_builddir)/config.status $(srcdir)/README.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
config.h.win32: $(top_builddir)/config.status $(srcdir)/config.h.win32.in
	cd $(top_builddir) && $(SHELL) ./config.status $@

clean-checkLTLIBRARIES:
	-test -z "$(check_LTLIBRARIES)" || rm -f $(check_LTLIBRARIES)
	@list='$(check_LTLIBRARIES)'; \
	locs=`for p in $$list; do echo $$p; done | \
	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
	      sort -u`; \
	test -z "$$locs" || { \
	  echo rm -f $${locs}; \
	  rm -f $${locs}; \
	}

install-installed_testLTLIBRARIES: $(installed_test_LTLIBRARIES)
	@$(NORMAL_INSTALL)
	@list='$(installed_test_LTLIBRARIES)'; test -n "$(installed_testdir)" || list=; \
	list2=; for p in $$list; do \
	  if test -f $$p; then \
	    list2="$$list2 $$p"; \
	  else :; fi; \
	done; \
	test -z "$$list2" || { \
	  echo " $(MKDIR_P) '$(DESTDIR)$(installed_testdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(installed_testdir)" || exit 1; \
	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(installed_testdir)'"; \
	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(installed_testdir)"; \
	}

uninstall-installed_testLTLIBRARIES:
	@$(NORMAL_UNINSTALL)
	@list='$(installed_test_LTLIBRARIES)'; test -n "$(installed_testdir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(installed_testdir)/$$f'"; \
	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(installed_testdir)/$$f"; \
	done

clean-installed_testLTLIBRARIES:
	-test -z "$(installed_test_LTLIBRARIES)" || rm -f $(installed_test_LTLIBRARIES)
	@list='$(installed_test_LTLIBRARIES)'; \
	locs=`for p in $$list; do echo $$p; done | \
	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
	      sort -u`; \
	test -z "$$locs" || { \
	  echo rm -f $${locs}; \
	  rm -f $${locs}; \
	}

clean-noinstLTLIBRARIES:
	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
	@list='$(noinst_LTLIBRARIES)'; \
	locs=`for p in $$list; do echo $$p; done | \
	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
	      sort -u`; \
	test -z "$$locs" || { \
	  echo rm -f $${locs}; \
	  rm -f $${locs}; \
	}

clean-checkPROGRAMS:
	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
	echo " rm -f" $$list; \
	rm -f $$list || exit $$?; \
	test -n "$(EXEEXT)" || exit 0; \
	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
	echo " rm -f" $$list; \
	rm -f $$list
install-installed_testPROGRAMS: $(installed_test_PROGRAMS)
	@$(NORMAL_INSTALL)
	@list='$(installed_test_PROGRAMS)'; test -n "$(installed_testdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(installed_testdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(installed_testdir)" || exit 1; \
	fi; \
	for p in $$list; do echo "$$p $$p"; done | \
	sed 's/$(EXEEXT)$$//' | \
	while read p p1; do if test -f $$p \
	 || test -f $$p1 \
	  ; then echo "$$p"; echo "$$p"; else :; fi; \
	done | \
	sed -e 'p;s,.*/,,;n;h' \
	    -e 's|.*|.|' \
	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
	sed 'N;N;N;s,\n, ,g' | \
	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
	    else { print "f", $$3 "/" $$4, $$1; } } \
	  END { for (d in files) print "f", d, files[d] }' | \
	while read type dir files; do \
	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
	    test -z "$$files" || { \
	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(installed_testdir)$$dir'"; \
	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(installed_testdir)$$dir" || exit $$?; \
	    } \
	; done

uninstall-installed_testPROGRAMS:
	@$(NORMAL_UNINSTALL)
	@list='$(installed_test_PROGRAMS)'; test -n "$(installed_testdir)" || list=; \
	files=`for p in $$list; do echo "$$p"; done | \
	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
	      -e 's/$$/$(EXEEXT)/' \
	`; \
	test -n "$$list" || exit 0; \
	echo " ( cd '$(DESTDIR)$(installed_testdir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(installed_testdir)" && rm -f $$files

clean-installed_testPROGRAMS:
	@list='$(installed_test_PROGRAMS)'; test -n "$$list" || exit 0; \
	echo " rm -f" $$list; \
	rm -f $$list || exit $$?; \
	test -n "$(EXEEXT)" || exit 0; \
	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
	echo " rm -f" $$list; \
	rm -f $$list

clean-noinstPROGRAMS:
	@list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \
	echo " rm -f" $$list; \
	rm -f $$list || exit $$?; \
	test -n "$(EXEEXT)" || exit 0; \
	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
	echo " rm -f" $$list; \
	rm -f $$list
install-binSCRIPTS: $(bin_SCRIPTS)
	@$(NORMAL_INSTALL)
	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
	done | \
	sed -e 'p;s,.*/,,;n' \
	    -e 'h;s|.*|.|' \
	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
	      if (++n[d] == $(am__install_max)) { \
		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
	    else { print "f", d "/" $$4, $$1 } } \
	  END { for (d in files) print "f", d, files[d] }' | \
	while read type dir files; do \
	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
	     test -z "$$files" || { \
	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
	     } \
	; done

uninstall-binSCRIPTS:
	@$(NORMAL_UNINSTALL)
	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
	files=`for p in $$list; do echo "$$p"; done | \
	       sed -e 's,.*/,,;$(transform)'`; \
	dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir)
install-installed_testSCRIPTS: $(installed_test_SCRIPTS)
	@$(NORMAL_INSTALL)
	@list='$(installed_test_SCRIPTS)'; test -n "$(installed_testdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(installed_testdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(installed_testdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
	done | \
	sed -e 'p;s,.*/,,;n' \
	    -e 'h;s|.*|.|' \
	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
	      if (++n[d] == $(am__install_max)) { \
		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
	    else { print "f", d "/" $$4, $$1 } } \
	  END { for (d in files) print "f", d, files[d] }' | \
	while read type dir files; do \
	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
	     test -z "$$files" || { \
	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(installed_testdir)$$dir'"; \
	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(installed_testdir)$$dir" || exit $$?; \
	     } \
	; done

uninstall-installed_testSCRIPTS:
	@$(NORMAL_UNINSTALL)
	@list='$(installed_test_SCRIPTS)'; test -n "$(installed_testdir)" || exit 0; \
	files=`for p in $$list; do echo "$$p"; done | \
	       sed -e 's,.*/,,;$(transform)'`; \
	dir='$(DESTDIR)$(installed_testdir)'; $(am__uninstall_files_from_dir)

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool config.lt
install-installed_test_metaDATA: $(installed_test_meta_DATA)
	@$(NORMAL_INSTALL)
	@list='$(installed_test_meta_DATA)'; test -n "$(installed_test_metadir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(installed_test_metadir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(installed_test_metadir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(installed_test_metadir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(installed_test_metadir)" || exit $$?; \
	done

uninstall-installed_test_metaDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(installed_test_meta_DATA)'; test -n "$(installed_test_metadir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(installed_test_metadir)'; $(am__uninstall_files_from_dir)
install-nobase_installed_testDATA: $(nobase_installed_test_DATA)
	@$(NORMAL_INSTALL)
	@list='$(nobase_installed_test_DATA)'; test -n "$(installed_testdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(installed_testdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(installed_testdir)" || exit 1; \
	fi; \
	$(am__nobase_list) | while read dir files; do \
	  xfiles=; for file in $$files; do \
	    if test -f "$$file"; then xfiles="$$xfiles $$file"; \
	    else xfiles="$$xfiles $(srcdir)/$$file"; fi; done; \
	  test -z "$$xfiles" || { \
	    test "x$$dir" = x. || { \
	      echo " $(MKDIR_P) '$(DESTDIR)$(installed_testdir)/$$dir'"; \
	      $(MKDIR_P) "$(DESTDIR)$(installed_testdir)/$$dir"; }; \
	    echo " $(INSTALL_DATA) $$xfiles '$(DESTDIR)$(installed_testdir)/$$dir'"; \
	    $(INSTALL_DATA) $$xfiles "$(DESTDIR)$(installed_testdir)/$$dir" || exit $$?; }; \
	done

uninstall-nobase_installed_testDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(nobase_installed_test_DATA)'; test -n "$(installed_testdir)" || list=; \
	$(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \
	dir='$(DESTDIR)$(installed_testdir)'; $(am__uninstall_files_from_dir)
install-pkgconfigDATA: $(pkgconfig_DATA)
	@$(NORMAL_INSTALL)
	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
	done

uninstall-pkgconfigDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)

# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
#     (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
	@fail=; \
	if $(am__make_keepgoing); then \
	  failcom='fail=yes'; \
	else \
	  failcom='exit 1'; \
	fi; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

ID: $(am__tagged_files)
	$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	$(am__define_uniq_tagged_files); \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: ctags-recursive

CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	$(am__define_uniq_tagged_files); \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
	test ! -s cscope.files \
	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
	-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-recursive

cscopelist-am: $(am__tagged_files)
	list='$(am__tagged_files)'; \
	case "$(srcdir)" in \
	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
	  *) sdir=$(subdir)/$(srcdir) ;; \
	esac; \
	for i in $$list; do \
	  if test -f "$$i"; then \
	    echo "$(subdir)/$$i"; \
	  else \
	    echo "$$sdir/$$i"; \
	  fi; \
	done >> $(top_builddir)/cscope.files

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files

# Recover from deleted '.trs' file; this should ensure that
# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
# to avoid problems with "make -n".
.log.trs:
	rm -f $< $@
	$(MAKE) $(AM_MAKEFLAGS) $<

# Leading 'am--fnord' is there to ensure the list of targets does not
# expand to empty, as could happen e.g. with make check TESTS=''.
am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
am--force-recheck:
	@:

$(TEST_SUITE_LOG): $(TEST_LOGS)
	@$(am__set_TESTS_bases); \
	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
	redo_bases=`for i in $$bases; do \
	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
	            done`; \
	if test -n "$$redo_bases"; then \
	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
	  if $(am__make_dryrun); then :; else \
	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
	  fi; \
	fi; \
	if test -n "$$am__remaking_logs"; then \
	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
	       "recursion detected" >&2; \
	elif test -n "$$redo_logs"; then \
	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
	fi; \
	if $(am__make_dryrun); then :; else \
	  st=0;  \
	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
	  for i in $$redo_bases; do \
	    test -f $$i.trs && test -r $$i.trs \
	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
	    test -f $$i.log && test -r $$i.log \
	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
	  done; \
	  test $$st -eq 0 || exit 1; \
	fi
	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
	ws='[ 	]'; \
	results=`for b in $$bases; do echo $$b.trs; done`; \
	test -n "$$results" || results=/dev/null; \
	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
	  success=true; \
	else \
	  success=false; \
	fi; \
	br='==================='; br=$$br$$br$$br$$br; \
	result_count () \
	{ \
	    if test x"$$1" = x"--maybe-color"; then \
	      maybe_colorize=yes; \
	    elif test x"$$1" = x"--no-color"; then \
	      maybe_colorize=no; \
	    else \
	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
	    fi; \
	    shift; \
	    desc=$$1 count=$$2; \
	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
	      color_start=$$3 color_end=$$std; \
	    else \
	      color_start= color_end=; \
	    fi; \
	    echo "$${color_start}# $$desc $$count$${color_end}"; \
	}; \
	create_testsuite_report () \
	{ \
	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
	  result_count $$1 "PASS: " $$pass  "$$grn"; \
	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
	  result_count $$1 "FAIL: " $$fail  "$$red"; \
	  result_count $$1 "XPASS:" $$xpass "$$red"; \
	  result_count $$1 "ERROR:" $$error "$$mgn"; \
	}; \
	{								\
	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
	    $(am__rst_title);						\
	  create_testsuite_report --no-color;				\
	  echo;								\
	  echo ".. contents:: :depth: 2";				\
	  echo;								\
	  for b in $$bases; do echo $$b; done				\
	    | $(am__create_global_log);					\
	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
	if $$success; then						\
	  col="$$grn";							\
	 else								\
	  col="$$red";							\
	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
	fi;								\
	echo "$${col}$$br$${std}"; 					\
	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
	echo "$${col}$$br$${std}"; 					\
	create_testsuite_report --maybe-color;				\
	echo "$$col$$br$$std";						\
	if $$success; then :; else					\
	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
	  fi;								\
	  echo "$$col$$br$$std";					\
	fi;								\
	$$success || exit 1

check-TESTS:
	@list='$(RECHECK_LOGS)';           test -z "$$list" || rm -f $$list
	@list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list
	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
	@set +e; $(am__set_TESTS_bases); \
	log_list=`for i in $$bases; do echo $$i.log; done`; \
	trs_list=`for i in $$bases; do echo $$i.trs; done`; \
	log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \
	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \
	exit $$?;
recheck: all $(check_LTLIBRARIES) $(check_PROGRAMS) $(check_SCRIPTS) $(check_DATA)
	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
	@set +e; $(am__set_TESTS_bases); \
	bases=`for i in $$bases; do echo $$i; done \
	         | $(am__list_recheck_tests)` || exit 1; \
	log_list=`for i in $$bases; do echo $$i.log; done`; \
	log_list=`echo $$log_list`; \
	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
	        am__force_recheck=am--force-recheck \
	        TEST_LOGS="$$log_list"; \
	exit $$?
check-abis.sh.log: check-abis.sh
	@p='check-abis.sh'; \
	b='check-abis.sh'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
.test.log:
	@p='$<'; \
	$(am__set_b); \
	$(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
@am__EXEEXT_TRUE@.test$(EXEEXT).log:
@am__EXEEXT_TRUE@	@p='$<'; \
@am__EXEEXT_TRUE@	$(am__set_b); \
@am__EXEEXT_TRUE@	$(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)

distdir: $(DISTFILES)
	$(am__remove_distdir)
	test -d "$(distdir)" || mkdir "$(distdir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    $(am__make_dryrun) \
	      || test -d "$(distdir)/$$subdir" \
	      || $(MKDIR_P) "$(distdir)/$$subdir" \
	      || exit 1; \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
	-test -n "$(am__skip_mode_fix)" \
	|| find "$(distdir)" -type d ! -perm -755 \
		-exec chmod u+rwx,go+rx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
	$(am__post_remove_distdir)

dist-bzip2: distdir
	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
	$(am__post_remove_distdir)

dist-lzip: distdir
	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
	$(am__post_remove_distdir)
dist-xz: distdir
	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
	$(am__post_remove_distdir)

dist-tarZ: distdir
	@echo WARNING: "Support for distribution archives compressed with" \
		       "legacy program 'compress' is deprecated." >&2
	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
	$(am__post_remove_distdir)

dist-shar: distdir
	@echo WARNING: "Support for shar distribution archives is" \
	               "deprecated." >&2
	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
	$(am__post_remove_distdir)

dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__post_remove_distdir)

dist dist-all:
	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
	$(am__post_remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	case '$(DIST_ARCHIVES)' in \
	*.tar.gz*) \
	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
	*.tar.bz2*) \
	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
	*.tar.lz*) \
	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
	*.tar.xz*) \
	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
	*.tar.Z*) \
	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
	*.shar.gz*) \
	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
	*.zip*) \
	  unzip $(distdir).zip ;;\
	esac
	chmod -R a-w $(distdir)
	chmod u+w $(distdir)
	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
	chmod a-w $(distdir)
	test -d $(distdir)/_build || exit 0; \
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && am__cwd=`pwd` \
	  && $(am__cd) $(distdir)/_build/sub \
	  && ../../configure \
	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	    --srcdir=../.. --prefix="$$dc_install_base" \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
	  && rm -rf $(DIST_ARCHIVES) \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
	  && cd "$$am__cwd" \
	  || exit 1
	$(am__post_remove_distdir)
	@(echo "$(distdir) archives ready for distribution: "; \
	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
	@test -n '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: trying to run $@ with an empty' \
	       '$$(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	$(am__cd) '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) $(check_LTLIBRARIES) $(check_PROGRAMS) \
	  $(check_SCRIPTS) $(check_DATA)
	$(MAKE) $(AM_MAKEFLAGS) check-TESTS check-local
check: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) check-recursive
all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(SCRIPTS) $(DATA) \
		config.h
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(installed_testdir)" "$(DESTDIR)$(installed_testdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(installed_testdir)" "$(DESTDIR)$(installed_test_metadir)" "$(DESTDIR)$(installed_testdir)" "$(DESTDIR)$(pkgconfigdir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:
	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-recursive

clean-am: clean-checkLTLIBRARIES clean-checkPROGRAMS clean-generic \
	clean-installed_testLTLIBRARIES clean-installed_testPROGRAMS \
	clean-libtool clean-noinstLTLIBRARIES clean-noinstPROGRAMS \
	mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-hdr \
	distclean-libtool distclean-local distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am: install-installed_testLTLIBRARIES \
	install-installed_testPROGRAMS install-installed_testSCRIPTS \
	install-installed_test_metaDATA \
	install-nobase_installed_testDATA install-pkgconfigDATA

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am: install-binSCRIPTS

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-binSCRIPTS uninstall-installed_testLTLIBRARIES \
	uninstall-installed_testPROGRAMS \
	uninstall-installed_testSCRIPTS \
	uninstall-installed_test_metaDATA \
	uninstall-nobase_installed_testDATA uninstall-pkgconfigDATA

.MAKE: $(am__recursive_targets) all check check-am install install-am \
	install-strip

.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
	am--refresh check check-TESTS check-am check-local clean \
	clean-checkLTLIBRARIES clean-checkPROGRAMS clean-cscope \
	clean-generic clean-installed_testLTLIBRARIES \
	clean-installed_testPROGRAMS clean-libtool \
	clean-noinstLTLIBRARIES clean-noinstPROGRAMS cscope \
	cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
	dist-gzip dist-hook dist-lzip dist-shar dist-tarZ dist-xz \
	dist-zip distcheck distclean distclean-generic distclean-hdr \
	distclean-libtool distclean-local distclean-tags \
	distcleancheck distdir distuninstallcheck dvi dvi-am html \
	html-am info info-am install install-am install-binSCRIPTS \
	install-data install-data-am install-dvi install-dvi-am \
	install-exec install-exec-am install-html install-html-am \
	install-info install-info-am install-installed_testLTLIBRARIES \
	install-installed_testPROGRAMS install-installed_testSCRIPTS \
	install-installed_test_metaDATA install-man \
	install-nobase_installed_testDATA install-pdf install-pdf-am \
	install-pkgconfigDATA install-ps install-ps-am install-strip \
	installcheck installcheck-am installdirs installdirs-am \
	maintainer-clean maintainer-clean-generic mostlyclean \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	recheck tags tags-am uninstall uninstall-am \
	uninstall-binSCRIPTS uninstall-installed_testLTLIBRARIES \
	uninstall-installed_testPROGRAMS \
	uninstall-installed_testSCRIPTS \
	uninstall-installed_test_metaDATA \
	uninstall-nobase_installed_testDATA uninstall-pkgconfigDATA

.PRECIOUS: Makefile


# test-nonrecursive: run tests only in cwd
@OS_UNIX_TRUE@test-nonrecursive: ${TEST_PROGS}
@OS_UNIX_TRUE@	@test -z "${TEST_PROGS}" || G_TEST_SRCDIR="$(abs_srcdir)" G_TEST_BUILDDIR="$(abs_builddir)" G_DEBUG=gc-friendly MALLOC_CHECK_=2 MALLOC_PERTURB_=$$(($${RANDOM:-256} % 256)) ${GTESTER} --verbose ${TEST_PROGS}
@OS_UNIX_FALSE@test-nonrecursive:

.PHONY: test-nonrecursive

.PHONY: lcov genlcov lcov-clean
# use recursive makes in order to ignore errors during check
lcov:
	-$(MAKE) $(AM_MAKEFLAGS) -k check
	$(MAKE) $(AM_MAKEFLAGS) genlcov

# we have to massage the lcov.info file slightly to hide the effect of libtool
# placing the objects files in the .libs/ directory separate from the *.c
# we also have to delete tests/.libs/libmoduletestplugin_*.gcda
genlcov:
	$(AM_V_GEN) rm -f $(top_builddir)/tests/.libs/libmoduletestplugin_*.gcda; \
	  $(LTP) --quiet --directory $(top_builddir) --capture --output-file glib-lcov.info --test-name GLIB_PERF --no-checksum --compat-libtool --ignore-errors source; \
	  $(LTP) --quiet --output-file glib-lcov.info --remove glib-lcov.info docs/reference/\* /tmp/\*  gio/tests/gdbus-object-manager-example/\* ; \
	  LANG=C $(LTP_GENHTML) --quiet --prefix $(top_builddir) --output-directory glib-lcov --title "GLib Code Coverage" --legend --frames --show-details glib-lcov.info --ignore-errors source
	@echo "file://$(abs_top_builddir)/glib-lcov/index.html"

lcov-clean:
	if test -n "$(LTP)"; then \
	  $(LTP) --quiet --directory $(top_builddir) -z; \
	fi

# run tests in cwd as part of make check
check-local: test-nonrecursive

@ENABLE_INSTALLED_TESTS_TRUE@%.test: %$(EXEEXT) Makefile
@ENABLE_INSTALLED_TESTS_TRUE@	$(AM_V_GEN) (echo '[Test]' > $@.tmp; \
@ENABLE_INSTALLED_TESTS_TRUE@	echo 'Type=session' >> $@.tmp; \
@ENABLE_INSTALLED_TESTS_TRUE@	echo 'Exec=$(installed_testdir)/$(notdir $<)' >> $@.tmp; \
@ENABLE_INSTALLED_TESTS_TRUE@	mv $@.tmp $@)

# http://people.gnome.org/~walters/docs/build-api.txt
.buildapi-allow-builddir:

ChangeLog:
	$(AM_V_GEN) if test -d "$(srcdir)/.git"; then \
	  (GIT_DIR=$(top_srcdir)/.git ./missing --run git log GLIB_2_20_0^^.. --stat) | fmt --split-only > $@.tmp \
	  && mv -f $@.tmp $@ \
	  || ($(RM) $@.tmp; \
	      echo Failed to generate ChangeLog, your ChangeLog may be outdated >&2; \
	      (test -f $@ || echo git-log is required to generate this file >> $@)); \
	else \
	  test -f $@ || \
	  (echo A git checkout and git-log is required to generate ChangeLog >&2 && \
	  echo A git checkout and git-log is required to generate this file >> $@); \
	fi

$(pkgconfig_DATA): config.status

distclean-local: lcov-clean
	if test $(srcdir) = .; then :; else \
	    rm -f $(BUILT_EXTRA_DIST); \
	fi

.PHONY: files release sanity snapshot ChangeLog

files:
	@files=`ls $(DISTFILES) 2> /dev/null `; for p in $$files; do \
	  echo $$p; \
	done

release:
	rm -rf .deps */.deps
	cd docs && make glib.html
	$(MAKE) distcheck

sanity:
	./sanity_check $(VERSION)

snapshot:
	$(MAKE) dist distdir=$(PACKAGE)-snap`date +"%Y%m%d"`

snapcheck:
	$(MAKE) distcheck distdir=$(PACKAGE)-snap`date +"%Y%m%d"`

dist-hook: $(BUILT_EXTRA_DIST)
	files='$(BUILT_EXTRA_DIST)'; \
	for f in $$files; do \
	  if test -f $$f; then d=.; else d=$(srcdir); fi; \
	  rm -f $(distdir)/$$f && cp $$d/$$f $(distdir) || exit 1; done

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: