| # Makefile.in generated by automake 1.11.6 from Makefile.am. |
| # @configure_input@ |
| |
| # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, |
| # 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software |
| # Foundation, Inc. |
| # This Makefile.in is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| @SET_MAKE@ |
| |
| # Copyright (C) 2002 Free Software Foundation, Inc. |
| # |
| # This file is part of Libgcrypt. |
| # |
| # Libgcrypt is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU Lesser General Public License as |
| # published by the Free Software Foundation; either version 2.1 of |
| # the License, or (at your option) any later version. |
| # |
| # Libgcrypt is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU Lesser General Public License for more details. |
| # |
| # You should have received a copy of the GNU Lesser General Public |
| # License along with this program; if not, write to the Free Software |
| # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA |
| VPATH = @srcdir@ |
| am__make_dryrun = \ |
| { \ |
| am__dry=no; \ |
| case $$MAKEFLAGS in \ |
| *\\[\ \ ]*) \ |
| echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ |
| | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ |
| *) \ |
| for am__flg in $$MAKEFLAGS; do \ |
| case $$am__flg in \ |
| *=*|--*) ;; \ |
| *n*) am__dry=yes; break;; \ |
| esac; \ |
| done;; \ |
| esac; \ |
| test $$am__dry = yes; \ |
| } |
| pkgdatadir = $(datadir)/@PACKAGE@ |
| pkgincludedir = $(includedir)/@PACKAGE@ |
| pkglibdir = $(libdir)/@PACKAGE@ |
| pkglibexecdir = $(libexecdir)/@PACKAGE@ |
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| install_sh_DATA = $(install_sh) -c -m 644 |
| install_sh_PROGRAM = $(install_sh) -c |
| install_sh_SCRIPT = $(install_sh) -c |
| INSTALL_HEADER = $(INSTALL_DATA) |
| transform = $(program_transform_name) |
| NORMAL_INSTALL = : |
| PRE_INSTALL = : |
| POST_INSTALL = : |
| NORMAL_UNINSTALL = : |
| PRE_UNINSTALL = : |
| POST_UNINSTALL = : |
| build_triplet = @build@ |
| host_triplet = @host@ |
| subdir = doc |
| DIST_COMMON = $(gcrypt_TEXINFOS) $(srcdir)/Makefile.am \ |
| $(srcdir)/Makefile.in $(srcdir)/stamp-vti \ |
| $(srcdir)/version.texi |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| am__aclocal_m4_deps = $(top_srcdir)/m4/gpg-error.m4 \ |
| $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/lock.m4 \ |
| $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ |
| $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ |
| $(top_srcdir)/m4/noexecstack.m4 $(top_srcdir)/m4/onceonly.m4 \ |
| $(top_srcdir)/m4/socklen.m4 $(top_srcdir)/m4/sys_socket_h.m4 \ |
| $(top_srcdir)/m4/threadlib.m4 $(top_srcdir)/acinclude.m4 \ |
| $(top_srcdir)/configure.ac |
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| $(ACLOCAL_M4) |
| mkinstalldirs = $(install_sh) -d |
| CONFIG_HEADER = $(top_builddir)/config.h |
| CONFIG_CLEAN_FILES = |
| CONFIG_CLEAN_VPATH_FILES = |
| AM_V_GEN = $(am__v_GEN_@AM_V@) |
| am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) |
| am__v_GEN_0 = @echo " GEN " $@; |
| AM_V_at = $(am__v_at_@AM_V@) |
| am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) |
| am__v_at_0 = @ |
| SOURCES = |
| DIST_SOURCES = |
| INFO_DEPS = $(srcdir)/gcrypt.info |
| TEXINFO_TEX = $(top_srcdir)/build-aux/texinfo.tex |
| am__TEXINFO_TEX_DIR = $(top_srcdir)/build-aux |
| DVIS = gcrypt.dvi |
| PDFS = gcrypt.pdf |
| PSS = gcrypt.ps |
| HTMLS = gcrypt.html |
| TEXINFOS = gcrypt.texi |
| TEXI2DVI = texi2dvi |
| TEXI2PDF = $(TEXI2DVI) --pdf --batch |
| MAKEINFOHTML = $(MAKEINFO) --html |
| AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS) |
| DVIPS = dvips |
| am__can_run_installinfo = \ |
| case $$AM_UPDATE_INFO_DIR in \ |
| n|no|NO) false;; \ |
| *) (install-info --version) >/dev/null 2>&1;; \ |
| esac |
| am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" |
| am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; |
| am__vpath_adj = case $$p in \ |
| $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ |
| *) f=$$p;; \ |
| esac; |
| am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; |
| am__install_max = 40 |
| am__nobase_strip_setup = \ |
| srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` |
| am__nobase_strip = \ |
| for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" |
| am__nobase_list = $(am__nobase_strip_setup); \ |
| for p in $$list; do echo "$$p $$p"; done | \ |
| sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ |
| $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ |
| if (++n[$$2] == $(am__install_max)) \ |
| { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ |
| END { for (dir in files) print dir, files[dir] }' |
| am__base_list = \ |
| sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ |
| sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' |
| am__uninstall_files_from_dir = { \ |
| test -z "$$files" \ |
| || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ |
| || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ |
| $(am__cd) "$$dir" && rm -f $$files; }; \ |
| } |
| man1dir = $(mandir)/man1 |
| NROFF = nroff |
| MANS = $(man_MANS) |
| DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
| ACLOCAL = @ACLOCAL@ |
| AMTAR = @AMTAR@ |
| AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ |
| AR = @AR@ |
| AS = @AS@ |
| AUTOCONF = @AUTOCONF@ |
| AUTOHEADER = @AUTOHEADER@ |
| AUTOMAKE = @AUTOMAKE@ |
| AWK = @AWK@ |
| BUILD_FILEVERSION = @BUILD_FILEVERSION@ |
| BUILD_REVISION = @BUILD_REVISION@ |
| BUILD_TIMESTAMP = @BUILD_TIMESTAMP@ |
| CC = @CC@ |
| CCAS = @CCAS@ |
| CCASDEPMODE = @CCASDEPMODE@ |
| CCASFLAGS = @CCASFLAGS@ |
| CCDEPMODE = @CCDEPMODE@ |
| CC_FOR_BUILD = @CC_FOR_BUILD@ |
| CFLAGS = @CFLAGS@ |
| CPP = @CPP@ |
| CPPFLAGS = @CPPFLAGS@ |
| CYGPATH_W = @CYGPATH_W@ |
| DEFS = @DEFS@ |
| DEPDIR = @DEPDIR@ |
| DLLTOOL = @DLLTOOL@ |
| DL_LIBS = @DL_LIBS@ |
| DSYMUTIL = @DSYMUTIL@ |
| DUMPBIN = @DUMPBIN@ |
| ECHO_C = @ECHO_C@ |
| ECHO_N = @ECHO_N@ |
| ECHO_T = @ECHO_T@ |
| EGREP = @EGREP@ |
| EXEEXT = @EXEEXT@ |
| FALLBACK_SOCKLEN_T = @FALLBACK_SOCKLEN_T@ |
| FGREP = @FGREP@ |
| GCRYPT_CIPHERS = @GCRYPT_CIPHERS@ |
| GCRYPT_DIGESTS = @GCRYPT_DIGESTS@ |
| GCRYPT_HWF_MODULES = @GCRYPT_HWF_MODULES@ |
| GCRYPT_KDFS = @GCRYPT_KDFS@ |
| GCRYPT_PUBKEY_CIPHERS = @GCRYPT_PUBKEY_CIPHERS@ |
| GCRYPT_RANDOM = @GCRYPT_RANDOM@ |
| GPG_ERROR_CFLAGS = @GPG_ERROR_CFLAGS@ |
| GPG_ERROR_CONFIG = @GPG_ERROR_CONFIG@ |
| GPG_ERROR_LIBS = @GPG_ERROR_LIBS@ |
| GREP = @GREP@ |
| INSERT_SYS_SELECT_H = @INSERT_SYS_SELECT_H@ |
| INSTALL = @INSTALL@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
| LD = @LD@ |
| LDFLAGS = @LDFLAGS@ |
| LIBGCRYPT_CIPHERS = @LIBGCRYPT_CIPHERS@ |
| LIBGCRYPT_CONFIG_API_VERSION = @LIBGCRYPT_CONFIG_API_VERSION@ |
| LIBGCRYPT_CONFIG_CFLAGS = @LIBGCRYPT_CONFIG_CFLAGS@ |
| LIBGCRYPT_CONFIG_HOST = @LIBGCRYPT_CONFIG_HOST@ |
| LIBGCRYPT_CONFIG_LIBS = @LIBGCRYPT_CONFIG_LIBS@ |
| LIBGCRYPT_DIGESTS = @LIBGCRYPT_DIGESTS@ |
| LIBGCRYPT_LT_AGE = @LIBGCRYPT_LT_AGE@ |
| LIBGCRYPT_LT_CURRENT = @LIBGCRYPT_LT_CURRENT@ |
| LIBGCRYPT_LT_REVISION = @LIBGCRYPT_LT_REVISION@ |
| LIBGCRYPT_PUBKEY_CIPHERS = @LIBGCRYPT_PUBKEY_CIPHERS@ |
| LIBGCRYPT_THREAD_MODULES = @LIBGCRYPT_THREAD_MODULES@ |
| LIBMULTITHREAD = @LIBMULTITHREAD@ |
| LIBOBJS = @LIBOBJS@ |
| LIBS = @LIBS@ |
| LIBTHREAD = @LIBTHREAD@ |
| LIBTOOL = @LIBTOOL@ |
| LIPO = @LIPO@ |
| LN_S = @LN_S@ |
| LTLIBMULTITHREAD = @LTLIBMULTITHREAD@ |
| LTLIBOBJS = @LTLIBOBJS@ |
| LTLIBTHREAD = @LTLIBTHREAD@ |
| MAINT = @MAINT@ |
| MAKEINFO = @MAKEINFO@ |
| MANIFEST_TOOL = @MANIFEST_TOOL@ |
| MKDIR_P = @MKDIR_P@ |
| MPI_SFLAGS = @MPI_SFLAGS@ |
| NM = @NM@ |
| NMEDIT = @NMEDIT@ |
| NOEXECSTACK_FLAGS = @NOEXECSTACK_FLAGS@ |
| OBJDUMP = @OBJDUMP@ |
| OBJEXT = @OBJEXT@ |
| OTOOL = @OTOOL@ |
| OTOOL64 = @OTOOL64@ |
| PACKAGE = @PACKAGE@ |
| PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ |
| PACKAGE_NAME = @PACKAGE_NAME@ |
| PACKAGE_STRING = @PACKAGE_STRING@ |
| PACKAGE_TARNAME = @PACKAGE_TARNAME@ |
| PACKAGE_URL = @PACKAGE_URL@ |
| PACKAGE_VERSION = @PACKAGE_VERSION@ |
| PATH_SEPARATOR = @PATH_SEPARATOR@ |
| PTH_CFLAGS = @PTH_CFLAGS@ |
| PTH_CONFIG = @PTH_CONFIG@ |
| PTH_LIBS = @PTH_LIBS@ |
| RANLIB = @RANLIB@ |
| RC = @RC@ |
| RUN_LARGE_DATA_TESTS = @RUN_LARGE_DATA_TESTS@ |
| SED = @SED@ |
| SET_MAKE = @SET_MAKE@ |
| SHELL = @SHELL@ |
| STRIP = @STRIP@ |
| SYS_SOCKET_H = @SYS_SOCKET_H@ |
| VERSION = @VERSION@ |
| VERSION_NUMBER = @VERSION_NUMBER@ |
| abs_builddir = @abs_builddir@ |
| abs_srcdir = @abs_srcdir@ |
| abs_top_builddir = @abs_top_builddir@ |
| abs_top_srcdir = @abs_top_srcdir@ |
| ac_ct_AR = @ac_ct_AR@ |
| ac_ct_CC = @ac_ct_CC@ |
| ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ |
| am__include = @am__include@ |
| am__leading_dot = @am__leading_dot@ |
| am__quote = @am__quote@ |
| am__tar = @am__tar@ |
| am__untar = @am__untar@ |
| bindir = @bindir@ |
| build = @build@ |
| build_alias = @build_alias@ |
| build_cpu = @build_cpu@ |
| build_os = @build_os@ |
| build_vendor = @build_vendor@ |
| builddir = @builddir@ |
| datadir = @datadir@ |
| datarootdir = @datarootdir@ |
| docdir = @docdir@ |
| dvidir = @dvidir@ |
| emacs_local_vars_begin = @emacs_local_vars_begin@ |
| emacs_local_vars_end = @emacs_local_vars_end@ |
| emacs_local_vars_read_only = @emacs_local_vars_read_only@ |
| exec_prefix = @exec_prefix@ |
| host = @host@ |
| host_alias = @host_alias@ |
| host_cpu = @host_cpu@ |
| host_os = @host_os@ |
| host_vendor = @host_vendor@ |
| htmldir = @htmldir@ |
| includedir = @includedir@ |
| infodir = @infodir@ |
| install_sh = @install_sh@ |
| libdir = @libdir@ |
| libexecdir = @libexecdir@ |
| localedir = @localedir@ |
| localstatedir = @localstatedir@ |
| mandir = @mandir@ |
| mkdir_p = @mkdir_p@ |
| oldincludedir = @oldincludedir@ |
| pdfdir = @pdfdir@ |
| prefix = @prefix@ |
| program_transform_name = @program_transform_name@ |
| psdir = @psdir@ |
| sbindir = @sbindir@ |
| sharedstatedir = @sharedstatedir@ |
| srcdir = @srcdir@ |
| sysconfdir = @sysconfdir@ |
| target_alias = @target_alias@ |
| top_build_prefix = @top_build_prefix@ |
| top_builddir = @top_builddir@ |
| top_srcdir = @top_srcdir@ |
| EXTRA_DIST = README.apichanges HACKING DCO \ |
| libgcrypt-modules.eps fips-fsm.eps \ |
| libgcrypt-modules.png fips-fsm.png \ |
| libgcrypt-modules.pdf fips-fsm.pdf \ |
| yat2m.c |
| |
| DISTCLEANFILES = gcrypt.cps yat2m-stamp.tmp yat2m-stamp $(myman_pages) |
| CLEANFILES = yat2m |
| BUILT_SOURCES = libgcrypt-modules.eps fips-fsm.eps \ |
| libgcrypt-modules.png fips-fsm.png \ |
| libgcrypt-modules.pdf fips-fsm.pdf |
| |
| info_TEXINFOS = gcrypt.texi |
| gcrypt_TEXINFOS = lgpl.texi gpl.texi libgcrypt-modules.fig fips-fsm.fig |
| YAT2M_OPTIONS = -I $(srcdir) \ |
| --release "Libgcrypt @PACKAGE_VERSION@" --source "Libgcrypt" |
| |
| myman_sources = gcrypt.texi |
| myman_pages = hmac256.1 |
| man_MANS = $(myman_pages) |
| all: $(BUILT_SOURCES) |
| $(MAKE) $(AM_MAKEFLAGS) all-am |
| |
| .SUFFIXES: |
| .SUFFIXES: .dvi .eps .fig .html .info .jpg .pdf .png .ps .texi |
| $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) |
| @for dep in $?; do \ |
| case '$(am__configure_deps)' in \ |
| *$$dep*) \ |
| ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ |
| && { if test -f $@; then exit 0; else break; fi; }; \ |
| exit 1;; \ |
| esac; \ |
| done; \ |
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \ |
| $(am__cd) $(top_srcdir) && \ |
| $(AUTOMAKE) --gnu doc/Makefile |
| .PRECIOUS: Makefile |
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| @case '$?' in \ |
| *config.status*) \ |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ |
| *) \ |
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ |
| cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ |
| esac; |
| |
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| |
| $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| $(am__aclocal_m4_deps): |
| |
| mostlyclean-libtool: |
| -rm -f *.lo |
| |
| clean-libtool: |
| -rm -rf .libs _libs |
| |
| .texi.info: |
| restore=: && backupdir="$(am__leading_dot)am$$$$" && \ |
| am__cwd=`pwd` && $(am__cd) $(srcdir) && \ |
| rm -rf $$backupdir && mkdir $$backupdir && \ |
| if ($(MAKEINFO) --version) >/dev/null 2>&1; then \ |
| for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \ |
| if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \ |
| done; \ |
| else :; fi && \ |
| cd "$$am__cwd"; \ |
| if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ |
| -o $@ $<; \ |
| then \ |
| rc=0; \ |
| $(am__cd) $(srcdir); \ |
| else \ |
| rc=$$?; \ |
| $(am__cd) $(srcdir) && \ |
| $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \ |
| fi; \ |
| rm -rf $$backupdir; exit $$rc |
| |
| .texi.dvi: |
| TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ |
| MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ |
| $(TEXI2DVI) $< |
| |
| .texi.pdf: |
| TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ |
| MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ |
| $(TEXI2PDF) $< |
| |
| .texi.html: |
| rm -rf $(@:.html=.htp) |
| if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ |
| -o $(@:.html=.htp) $<; \ |
| then \ |
| rm -rf $@; \ |
| if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ |
| mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \ |
| else \ |
| if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ |
| rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \ |
| exit 1; \ |
| fi |
| $(srcdir)/gcrypt.info: gcrypt.texi $(srcdir)/version.texi $(gcrypt_TEXINFOS) |
| gcrypt.dvi: gcrypt.texi $(srcdir)/version.texi $(gcrypt_TEXINFOS) |
| gcrypt.pdf: gcrypt.texi $(srcdir)/version.texi $(gcrypt_TEXINFOS) |
| gcrypt.html: gcrypt.texi $(srcdir)/version.texi $(gcrypt_TEXINFOS) |
| $(srcdir)/version.texi: @MAINTAINER_MODE_TRUE@ $(srcdir)/stamp-vti |
| $(srcdir)/stamp-vti: gcrypt.texi $(top_srcdir)/configure |
| @(dir=.; test -f ./gcrypt.texi || dir=$(srcdir); \ |
| set `$(SHELL) $(top_srcdir)/build-aux/mdate-sh $$dir/gcrypt.texi`; \ |
| echo "@set UPDATED $$1 $$2 $$3"; \ |
| echo "@set UPDATED-MONTH $$2 $$3"; \ |
| echo "@set EDITION $(VERSION)"; \ |
| echo "@set VERSION $(VERSION)") > vti.tmp |
| @cmp -s vti.tmp $(srcdir)/version.texi \ |
| || (echo "Updating $(srcdir)/version.texi"; \ |
| cp vti.tmp $(srcdir)/version.texi) |
| -@rm -f vti.tmp |
| @cp $(srcdir)/version.texi $@ |
| |
| mostlyclean-vti: |
| -rm -f vti.tmp |
| |
| maintainer-clean-vti: |
| @MAINTAINER_MODE_TRUE@ -rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi |
| .dvi.ps: |
| TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ |
| $(DVIPS) -o $@ $< |
| |
| uninstall-dvi-am: |
| @$(NORMAL_UNINSTALL) |
| @list='$(DVIS)'; test -n "$(dvidir)" || list=; \ |
| for p in $$list; do \ |
| $(am__strip_dir) \ |
| echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \ |
| rm -f "$(DESTDIR)$(dvidir)/$$f"; \ |
| done |
| |
| uninstall-html-am: |
| @$(NORMAL_UNINSTALL) |
| @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \ |
| for p in $$list; do \ |
| $(am__strip_dir) \ |
| echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \ |
| rm -rf "$(DESTDIR)$(htmldir)/$$f"; \ |
| done |
| |
| uninstall-info-am: |
| @$(PRE_UNINSTALL) |
| @if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \ |
| list='$(INFO_DEPS)'; \ |
| for file in $$list; do \ |
| relfile=`echo "$$file" | sed 's|^.*/||'`; \ |
| echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \ |
| if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \ |
| then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \ |
| done; \ |
| else :; fi |
| @$(NORMAL_UNINSTALL) |
| @list='$(INFO_DEPS)'; \ |
| for file in $$list; do \ |
| relfile=`echo "$$file" | sed 's|^.*/||'`; \ |
| relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \ |
| (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \ |
| echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \ |
| rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \ |
| else :; fi); \ |
| done |
| |
| uninstall-pdf-am: |
| @$(NORMAL_UNINSTALL) |
| @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \ |
| for p in $$list; do \ |
| $(am__strip_dir) \ |
| echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \ |
| rm -f "$(DESTDIR)$(pdfdir)/$$f"; \ |
| done |
| |
| uninstall-ps-am: |
| @$(NORMAL_UNINSTALL) |
| @list='$(PSS)'; test -n "$(psdir)" || list=; \ |
| for p in $$list; do \ |
| $(am__strip_dir) \ |
| echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \ |
| rm -f "$(DESTDIR)$(psdir)/$$f"; \ |
| done |
| |
| dist-info: $(INFO_DEPS) |
| @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ |
| list='$(INFO_DEPS)'; \ |
| for base in $$list; do \ |
| case $$base in \ |
| $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \ |
| esac; \ |
| if test -f $$base; then d=.; else d=$(srcdir); fi; \ |
| base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \ |
| for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \ |
| if test -f $$file; then \ |
| relfile=`expr "$$file" : "$$d/\(.*\)"`; \ |
| test -f "$(distdir)/$$relfile" || \ |
| cp -p $$file "$(distdir)/$$relfile"; \ |
| else :; fi; \ |
| done; \ |
| done |
| |
| mostlyclean-aminfo: |
| -rm -rf gcrypt.aux gcrypt.cp gcrypt.cps gcrypt.fn gcrypt.fns gcrypt.ky \ |
| gcrypt.kys gcrypt.log gcrypt.pg gcrypt.tmp gcrypt.toc \ |
| gcrypt.tp gcrypt.vr gcrypt.vrs |
| |
| clean-aminfo: |
| -test -z "gcrypt.dvi gcrypt.pdf gcrypt.ps gcrypt.html" \ |
| || rm -rf gcrypt.dvi gcrypt.pdf gcrypt.ps gcrypt.html |
| |
| maintainer-clean-aminfo: |
| @list='$(INFO_DEPS)'; for i in $$list; do \ |
| i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \ |
| echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \ |
| rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \ |
| done |
| install-man1: $(man_MANS) |
| @$(NORMAL_INSTALL) |
| @list1=''; \ |
| list2='$(man_MANS)'; \ |
| test -n "$(man1dir)" \ |
| && test -n "`echo $$list1$$list2`" \ |
| || exit 0; \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \ |
| { for i in $$list1; do echo "$$i"; done; \ |
| if test -n "$$list2"; then \ |
| for i in $$list2; do echo "$$i"; done \ |
| | sed -n '/\.1[a-z]*$$/p'; \ |
| fi; \ |
| } | while read p; do \ |
| if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; echo "$$p"; \ |
| done | \ |
| sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ |
| -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ |
| sed 'N;N;s,\n, ,g' | { \ |
| list=; while read file base inst; do \ |
| if test "$$base" = "$$inst"; then list="$$list $$file"; else \ |
| echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ |
| $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ |
| fi; \ |
| done; \ |
| for i in $$list; do echo "$$i"; done | $(am__base_list) | \ |
| while read files; do \ |
| test -z "$$files" || { \ |
| echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ |
| $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ |
| done; } |
| |
| uninstall-man1: |
| @$(NORMAL_UNINSTALL) |
| @list=''; test -n "$(man1dir)" || exit 0; \ |
| files=`{ for i in $$list; do echo "$$i"; done; \ |
| l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ |
| sed -n '/\.1[a-z]*$$/p'; \ |
| } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ |
| -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ |
| dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir) |
| tags: TAGS |
| TAGS: |
| |
| ctags: CTAGS |
| CTAGS: |
| |
| |
| distdir: $(DISTFILES) |
| @list='$(MANS)'; if test -n "$$list"; then \ |
| list=`for p in $$list; do \ |
| if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ |
| if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \ |
| if test -n "$$list" && \ |
| grep 'ab help2man is required to generate this page' $$list >/dev/null; then \ |
| echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \ |
| grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \ |
| echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \ |
| echo " typically \`make maintainer-clean' will remove them" >&2; \ |
| exit 1; \ |
| else :; fi; \ |
| else :; fi |
| @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| list='$(DISTFILES)'; \ |
| dist_files=`for file in $$list; do echo $$file; done | \ |
| sed -e "s|^$$srcdirstrip/||;t" \ |
| -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ |
| case $$dist_files in \ |
| */*) $(MKDIR_P) `echo "$$dist_files" | \ |
| sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ |
| sort -u` ;; \ |
| esac; \ |
| for file in $$dist_files; do \ |
| if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
| if test -d $$d/$$file; then \ |
| dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ |
| if test -d "$(distdir)/$$file"; then \ |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| fi; \ |
| if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
| cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| fi; \ |
| cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ |
| else \ |
| test -f "$(distdir)/$$file" \ |
| || cp -p $$d/$$file "$(distdir)/$$file" \ |
| || exit 1; \ |
| fi; \ |
| done |
| $(MAKE) $(AM_MAKEFLAGS) \ |
| top_distdir="$(top_distdir)" distdir="$(distdir)" \ |
| dist-info |
| check-am: all-am |
| check: $(BUILT_SOURCES) |
| $(MAKE) $(AM_MAKEFLAGS) check-am |
| all-am: Makefile $(INFO_DEPS) $(MANS) |
| installdirs: |
| for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \ |
| test -z "$$dir" || $(MKDIR_P) "$$dir"; \ |
| done |
| install: $(BUILT_SOURCES) |
| $(MAKE) $(AM_MAKEFLAGS) install-am |
| install-exec: install-exec-am |
| install-data: install-data-am |
| uninstall: uninstall-am |
| |
| install-am: all-am |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| |
| installcheck: installcheck-am |
| install-strip: |
| if test -z '$(STRIP)'; then \ |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| install; \ |
| else \ |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ |
| fi |
| mostlyclean-generic: |
| |
| clean-generic: |
| -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) |
| |
| distclean-generic: |
| -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
| -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) |
| -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) |
| |
| maintainer-clean-generic: |
| @echo "This command is intended for maintainers to use" |
| @echo "it deletes files that may require special tools to rebuild." |
| -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) |
| clean: clean-am |
| |
| clean-am: clean-aminfo clean-generic clean-libtool mostlyclean-am |
| |
| distclean: distclean-am |
| -rm -f Makefile |
| distclean-am: clean-am distclean-generic |
| |
| dvi: dvi-am |
| |
| dvi-am: $(DVIS) |
| |
| html: html-am |
| |
| html-am: $(HTMLS) |
| |
| info: info-am |
| |
| info-am: $(INFO_DEPS) |
| |
| install-data-am: install-info-am install-man |
| |
| install-dvi: install-dvi-am |
| |
| install-dvi-am: $(DVIS) |
| @$(NORMAL_INSTALL) |
| @list='$(DVIS)'; test -n "$(dvidir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \ |
| $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \ |
| done |
| install-exec-am: |
| |
| install-html: install-html-am |
| |
| install-html-am: $(HTMLS) |
| @$(NORMAL_INSTALL) |
| @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| $(am__strip_dir) \ |
| d2=$$d$$p; \ |
| if test -d "$$d2"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \ |
| echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \ |
| $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \ |
| else \ |
| list2="$$list2 $$d2"; \ |
| fi; \ |
| done; \ |
| test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \ |
| $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \ |
| done; } |
| install-info: install-info-am |
| |
| install-info-am: $(INFO_DEPS) |
| @$(NORMAL_INSTALL) |
| @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ |
| list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \ |
| fi; \ |
| for file in $$list; do \ |
| case $$file in \ |
| $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ |
| esac; \ |
| if test -f $$file; then d=.; else d=$(srcdir); fi; \ |
| file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \ |
| for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \ |
| $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \ |
| if test -f $$ifile; then \ |
| echo "$$ifile"; \ |
| else : ; fi; \ |
| done; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \ |
| $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done |
| @$(POST_INSTALL) |
| @if $(am__can_run_installinfo); then \ |
| list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \ |
| for file in $$list; do \ |
| relfile=`echo "$$file" | sed 's|^.*/||'`; \ |
| echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\ |
| install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\ |
| done; \ |
| else : ; fi |
| install-man: install-man1 |
| |
| install-pdf: install-pdf-am |
| |
| install-pdf-am: $(PDFS) |
| @$(NORMAL_INSTALL) |
| @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \ |
| $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done |
| install-ps: install-ps-am |
| |
| install-ps-am: $(PSS) |
| @$(NORMAL_INSTALL) |
| @list='$(PSS)'; test -n "$(psdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \ |
| $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done |
| installcheck-am: |
| |
| maintainer-clean: maintainer-clean-am |
| -rm -f Makefile |
| maintainer-clean-am: distclean-am maintainer-clean-aminfo \ |
| maintainer-clean-generic maintainer-clean-vti |
| |
| mostlyclean: mostlyclean-am |
| |
| mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \ |
| mostlyclean-libtool mostlyclean-vti |
| |
| pdf: pdf-am |
| |
| pdf-am: $(PDFS) |
| |
| ps: ps-am |
| |
| ps-am: $(PSS) |
| |
| uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \ |
| uninstall-man uninstall-pdf-am uninstall-ps-am |
| |
| uninstall-man: uninstall-man1 |
| |
| .MAKE: all check install install-am install-strip |
| |
| .PHONY: all all-am check check-am clean clean-aminfo clean-generic \ |
| clean-libtool dist-info distclean distclean-generic \ |
| distclean-libtool distdir dvi dvi-am html html-am info info-am \ |
| install install-am install-data install-data-am install-dvi \ |
| install-dvi-am install-exec install-exec-am install-html \ |
| install-html-am install-info install-info-am install-man \ |
| install-man1 install-pdf install-pdf-am install-ps \ |
| install-ps-am install-strip installcheck installcheck-am \ |
| installdirs maintainer-clean maintainer-clean-aminfo \ |
| maintainer-clean-generic maintainer-clean-vti mostlyclean \ |
| mostlyclean-aminfo mostlyclean-generic mostlyclean-libtool \ |
| mostlyclean-vti pdf pdf-am ps ps-am uninstall uninstall-am \ |
| uninstall-dvi-am uninstall-html-am uninstall-info-am \ |
| uninstall-man uninstall-man1 uninstall-pdf-am uninstall-ps-am |
| |
| |
| yat2m: yat2m.c |
| $(CC_FOR_BUILD) -o $@ $(srcdir)/yat2m.c |
| |
| .fig.png: |
| fig2dev -L png `test -f '$<' || echo '$(srcdir)/'`$< $@ |
| |
| .fig.jpg: |
| fig2dev -L jpg `test -f '$<' || echo '$(srcdir)/'`$< $@ |
| |
| .fig.eps: |
| fig2dev -L eps `test -f '$<' || echo '$(srcdir)/'`$< $@ |
| |
| .fig.pdf: |
| fig2dev -L pdf `test -f '$<' || echo '$(srcdir)/'`$< $@ |
| |
| yat2m-stamp: $(myman_sources) |
| @rm -f yat2m-stamp.tmp |
| @touch yat2m-stamp.tmp |
| for file in $(myman_sources) ; do \ |
| ./yat2m $(YAT2M_OPTIONS) --store \ |
| `test -f '$$file' || echo '$(srcdir)/'`$$file ; done |
| @mv -f yat2m-stamp.tmp $@ |
| |
| yat2m-stamp: yat2m |
| |
| $(myman_pages) : yat2m-stamp |
| @if test -f $@; then :; else \ |
| trap 'rm -rf yat2m-stamp yat2m-lock' 1 2 13 15; \ |
| if mkdir yat2m-lock 2>/dev/null; then \ |
| rm -f yat2m-stamp; \ |
| $(MAKE) $(AM_MAKEFLAGS) yat2m-stamp; \ |
| rmdir yat2m-lock; \ |
| else \ |
| while test -d yat2m-lock; do sleep 1; done; \ |
| test -f yat2m-stamp; exit $$?; \ |
| fi; \ |
| fi |
| |
| # Make sure that gcrypt.texi is touched if any other source file has |
| # been modified. This is required so that the version.texi magic |
| # updates the release date. |
| gnupg.texi : $(gcrypt_TEXINFOS) |
| touch $(srcdir)/gcrypt.texi |
| |
| online: gcrypt.html gcrypt.pdf gcrypt.info |
| set -e; \ |
| echo "Uploading current manuals to www.gnupg.org ..."; \ |
| cp libgcrypt-modules.png gcrypt.html/; \ |
| cp fips-fsm.png gcrypt.html/; \ |
| user=werner ; dashdevel="" ; \ |
| if echo "@PACKAGE_VERSION@" | grep -- "-svn" >/dev/null; then \ |
| dashdevel="-devel" ; \ |
| cp gcrypt.pdf gcrypt.html/; \ |
| cp gcrypt.info gcrypt.html/; \ |
| else \ |
| rsync -v gcrypt.pdf gcrypt.info \ |
| $${user}@trithemius.gnupg.org:webspace/manuals/ ; \ |
| fi ; \ |
| cd gcrypt.html ; \ |
| rsync -vr --exclude='.svn' . \ |
| $${user}@trithemius.gnupg.org:webspace/manuals/gcrypt$${dashdevel}/ |
| |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| # Otherwise a system limit (for SysV at least) may be exceeded. |
| .NOEXPORT: |
