blob: 43bf3c796cba9cfef5d45032ebcf05b6807dcd4c [file] [log] [blame]
/dts-v1/;
/include/ "imx28.dtsi"
/ {
model = "Bluegiga APX4 Development Kit";
compatible = "bluegiga,apx4devkit", "fsl,imx28";
memory {
reg = <0x40000000 0x04000000>;
};
apb@80000000 {
apbh@80000000 {
gpmi-nand@8000c000 {
pinctrl-names = "default";
pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
status = "okay";
};
ssp0: ssp@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
bus-width = <4>;
status = "okay";
};
ssp2: ssp@80014000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>;
bus-width = <4>;
status = "okay";
};
pinctrl@80018000 {
pinctrl-names = "default";
pinctrl-0 = <&hog_pins_a>;
hog_pins_a: hog@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */
0x0153 /* MX28_PAD_GPMI_RDY1__GPIO_0_21 */
0x2123 /* MX28_PAD_SSP2_MISO__GPIO_2_18 */
0x2131 /* MX28_PAD_SSP2_SS0__GPIO_2_19 */
0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
0x4143 /* MX28_PAD_JTAG_RTCK__GPIO_4_20 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
lcdif_pins_apx4: lcdif-apx4@0 {
reg = <0>;
fsl,pinmux-ids = <
0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2041 /* MX28_PAD_SSP0_DATA4__SSP2_D0 */
0x2051 /* MX28_PAD_SSP0_DATA5__SSP2_D3 */
0x2061 /* MX28_PAD_SSP0_DATA6__SSP2_CMD */
0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */
0x2141 /* MX28_PAD_SSP2_SS1__SSP2_D1 */
0x2151 /* MX28_PAD_SSP2_SS2__SSP2_D2 */
>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4 {
fsl,pinmux-ids = <
0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */
>;
fsl,drive-strength = <2>;
fsl,pull-up = <0>;
};
};
lcdif@80030000 {
pinctrl-names = "default";
pinctrl-0 = <&lcdif_24bit_pins_a
&lcdif_pins_apx4>;
display = <&display>;
status = "okay";
display: display {
bits-per-pixel = <32>;
bus-width = <24>;
display-timings {
native-mode = <&timing0>;
timing0: timing0 {
clock-frequency = <30000000>;
hactive = <800>;
vactive = <480>;
hback-porch = <88>;
hfront-porch = <40>;
vback-porch = <32>;
vfront-porch = <13>;
hsync-len = <48>;
vsync-len = <3>;
hsync-active = <1>;
vsync-active = <1>;
de-active = <1>;
pixelclk-active = <0>;
};
};
};
};
};
apbx@80040000 {
saif0: saif@80042000 {
pinctrl-names = "default";
pinctrl-0 = <&saif0_pins_a>;
status = "okay";
};
saif1: saif@80046000 {
pinctrl-names = "default";
pinctrl-0 = <&saif1_pins_a>;
fsl,saif-master = <&saif0>;
status = "okay";
};
i2c0: i2c@80058000 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
sgtl5000: codec@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
VDDA-supply = <&reg_3p3v>;
VDDIO-supply = <&reg_3p3v>;
};
pcf8563: rtc@51 {
compatible = "phg,pcf8563";
reg = <0x51>;
};
};
duart: serial@80074000 {
pinctrl-names = "default";
pinctrl-0 = <&duart_pins_a>;
status = "okay";
};
auart0: serial@8006a000 {
pinctrl-names = "default";
pinctrl-0 = <&auart0_pins_a>;
status = "okay";
};
auart1: serial@8006c000 {
pinctrl-names = "default";
pinctrl-0 = <&auart1_2pins_a>;
status = "okay";
};
auart2: serial@8006e000 {
pinctrl-names = "default";
pinctrl-0 = <&auart2_2pins_a>;
status = "okay";
};
};
};
ahb@80080000 {
mac0: ethernet@800f0000 {
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&mac0_pins_a>;
status = "okay";
};
};
regulators {
compatible = "simple-bus";
reg_3p3v: 3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
sound {
compatible = "bluegiga,apx4devkit-sgtl5000",
"fsl,mxs-audio-sgtl5000";
model = "apx4devkit-sgtl5000";
saif-controllers = <&saif0 &saif1>;
audio-codec = <&sgtl5000>;
};
leds {
compatible = "gpio-leds";
user {
label = "Heartbeat";
gpios = <&gpio3 28 0>;
linux,default-trigger = "heartbeat";
};
};
};