blob: a832e0707611714246e36ef37ff9b2a59faaf53e [file] [log] [blame]
/*
* arch/arm/mach-at91/include/mach/hardware.h
*
* Copyright (C) 2003 SAN People
* Copyright (C) 2003 ATMEL
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*/
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
#include <asm/sizes.h>
/* DBGU base */
/* rm9200, 9260/9g20, 9261/9g10, 9rl */
#define AT91_BASE_DBGU0 0xfffff200
/* 9263, 9g45 */
#define AT91_BASE_DBGU1 0xffffee00
#if defined(CONFIG_ARCH_AT91X40)
#include <mach/at91x40.h>
#else
#include <mach/at91rm9200.h>
#include <mach/at91sam9260.h>
#include <mach/at91sam9261.h>
#include <mach/at91sam9263.h>
#include <mach/at91sam9rl.h>
#include <mach/at91sam9g45.h>
#include <mach/at91sam9x5.h>
#include <mach/at91sam9n12.h>
/*
* On all at91 except rm9200 and x40 have the System Controller starts
* at address 0xffffc000 and has a size of 16KiB.
*
* On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting
* at 0xfffff000
*
* Removes the individual definitions of AT91_BASE_SYS and
* replaces them with a common version at base 0xfffffc000 and size 16KiB
* and map the same memory space
*/
#define AT91_BASE_SYS 0xffffc000
#endif
/*
* On all at91 have the Advanced Interrupt Controller starts at address
* 0xfffff000 and the Power Management Controller starts at 0xfffffc00
*/
#define AT91_AIC 0xfffff000
#define AT91_PMC 0xfffffc00
/*
* Peripheral identifiers/interrupts.
*/
#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
#define AT91_ID_SYS 1 /* System Peripherals */
#ifdef CONFIG_MMU
/*
* Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF
* to 0xFEF78000 .. 0xFF000000. (544Kb)
*/
#define AT91_IO_PHYS_BASE 0xFFF78000
#define AT91_IO_VIRT_BASE IOMEM(0xFF000000 - AT91_IO_SIZE)
#else
/*
* Identity mapping for the non MMU case.
*/
#define AT91_IO_PHYS_BASE AT91_BASE_SYS
#define AT91_IO_VIRT_BASE IOMEM(AT91_IO_PHYS_BASE)
#endif
#define AT91_IO_SIZE (0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)
/* Convert a physical IO address to virtual IO address */
#define AT91_IO_P2V(x) ((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
/*
* Virtual to Physical Address mapping for IO devices.
*/
#define AT91_VA_BASE_SYS AT91_IO_P2V(AT91_BASE_SYS)
/* Internal SRAM is mapped below the IO devices */
#define AT91_SRAM_MAX SZ_1M
#define AT91_VIRT_BASE (AT91_IO_VIRT_BASE - AT91_SRAM_MAX)
/* External Memory Map */
#define AT91_CHIPSELECT_0 0x10000000
#define AT91_CHIPSELECT_1 0x20000000
#define AT91_CHIPSELECT_2 0x30000000
#define AT91_CHIPSELECT_3 0x40000000
#define AT91_CHIPSELECT_4 0x50000000
#define AT91_CHIPSELECT_5 0x60000000
#define AT91_CHIPSELECT_6 0x70000000
#define AT91_CHIPSELECT_7 0x80000000
/* Clocks */
#define AT91_SLOW_CLOCK 32768 /* slow clock */
#endif