arch/mips/netlogic/common/smpboot.S - nest-hello/linux-3.10 - Git at Google

 /*
  * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
  * reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
  * General Public License (GPL) Version 2, available from the file
  * COPYING in the main directory of this source tree, or the NetLogic
  * license below:
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
  * are met:
  *
  * 1. Redistributions of source code must retain the above copyright
  *    notice, this list of conditions and the following disclaimer.
  * 2. Redistributions in binary form must reproduce the above copyright
  *    notice, this list of conditions and the following disclaimer in
  *    the documentation and/or other materials provided with the
  *    distribution.
  *
  * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
  * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
  * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
  * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
  * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */

 #include <linux/init.h>

 #include <asm/asm.h>
 #include <asm/asm-offsets.h>
 #include <asm/regdef.h>
 #include <asm/mipsregs.h>
 #include <asm/stackframe.h>
 #include <asm/asmmacro.h>
 #include <asm/addrspace.h>

 #include <asm/netlogic/common.h>

 #include <asm/netlogic/xlp-hal/iomap.h>
 #include <asm/netlogic/xlp-hal/xlp.h>
 #include <asm/netlogic/xlp-hal/sys.h>
 #include <asm/netlogic/xlp-hal/cpucontrol.h>

 #define CP0_EBASE	$15
 #define SYS_CPU_COHERENT_BASE(node)	CKSEG1ADDR(XLP_DEFAULT_IO_BASE) + \
 			XLP_IO_SYS_OFFSET(node) + XLP_IO_PCI_HDRSZ + \
 			SYS_CPU_NONCOHERENT_MODE * 4

 #define XLP_AX_WORKAROUND	/* enable Ax silicon workarounds */

 /* Enable XLP features and workarounds in the LSU */
 .macro xlp_config_lsu
 	li	t0, LSU_DEFEATURE
 	mfcr	t1, t0

 	lui	t2, 0xc080	/* SUE, Enable Unaligned Access, L2HPE */
 	or	t1, t1, t2
 #ifdef XLP_AX_WORKAROUND
 	li	t2, ~0xe	/* S1RCM */
 	and	t1, t1, t2
 #endif
 	mtcr	t1, t0

 	li	t0, ICU_DEFEATURE
 	mfcr	t1, t0
 	ori	t1, 0x1000	/* Enable Icache partitioning */
 	mtcr	t1, t0


 #ifdef XLP_AX_WORKAROUND
 	li	t0, SCHED_DEFEATURE
 	lui	t1, 0x0100	/* Disable BRU accepting ALU ops */
 	mtcr	t1, t0
 #endif
 .endm

 /*
  * This is the code that will be copied to the reset entry point for
  * XLR and XLP. The XLP cores start here when they are woken up. This
  * is also the NMI entry point.
  */
 .macro	xlp_flush_l1_dcache
 	li	t0, LSU_DEBUG_DATA0
 	li	t1, LSU_DEBUG_ADDR
 	li	t2, 0		/* index */
 	li	t3, 0x1000	/* loop count */
 1:
 	sll	v0, t2, 5
 	mtcr	zero, t0
 	ori	v1, v0, 0x3	/* way0 | write_enable | write_active */
 	mtcr	v1, t1
 2:
 	mfcr	v1, t1
 	andi	v1, 0x1		/* wait for write_active == 0 */
 	bnez	v1, 2b
 	nop
 	mtcr	zero, t0
 	ori	v1, v0, 0x7	/* way1 | write_enable | write_active */
 	mtcr	v1, t1
 3:
 	mfcr	v1, t1
 	andi	v1, 0x1		/* wait for write_active == 0 */
 	bnez	v1, 3b
 	nop
 	addi	t2, 1
 	bne	t3, t2, 1b
 	nop
 .endm

 /*
  * The cores can come start when they are woken up. This is also the NMI
  * entry, so check that first.
  *
  * The data corresponding to reset/NMI is stored at RESET_DATA_PHYS
  * location, this will have the thread mask (used when core is woken up)
  * and the current NMI handler in case we reached here for an NMI.
  *
  * When a core or thread is newly woken up, it loops in a 'wait'. When
  * the CPU really needs waking up, we send an NMI to it, with the NMI
  * handler set to prom_boot_secondary_cpus
  */

 	.set	noreorder
 	.set	noat
 	.set	arch=xlr	/* for mfcr/mtcr, XLR is sufficient */

 FEXPORT(nlm_reset_entry)
 	dmtc0	k0, $22, 6
 	dmtc0	k1, $22, 7
 	mfc0	k0, CP0_STATUS
 	li	k1, 0x80000
 	and	k1, k0, k1
 	beqz	k1, 1f		/* go to real reset entry */
 	nop
 	li	k1, CKSEG1ADDR(RESET_DATA_PHYS) /* NMI */
 	ld	k0, BOOT_NMI_HANDLER(k1)
 	jr	k0
 	nop

 1:	/* Entry point on core wakeup */
 	mfc0	t0, CP0_EBASE, 1
 	mfc0	t1, CP0_EBASE, 1
 	srl	t1, 5
 	andi	t1, 0x3			/* t1 <- node */
 	li	t2, 0x40000
 	mul	t3, t2, t1		/* t3 = node * 0x40000 */
 	srl	t0, t0, 2
 	and	t0, t0, 0x7		/* t0 <- core */
 	li	t1, 0x1
 	sll	t0, t1, t0
 	nor	t0, t0, zero		/* t0 <- ~(1 << core) */
 	li	t2, SYS_CPU_COHERENT_BASE(0)
 	add	t2, t2, t3		/* t2 <- SYS offset for node */
 	lw	t1, 0(t2)
 	and	t1, t1, t0
 	sw	t1, 0(t2)

 	/* read back to ensure complete */
 	lw	t1, 0(t2)
 	sync

 	/* Configure LSU on Non-0 Cores. */
 	xlp_config_lsu
 	/* FALL THROUGH */

 /*
  * Wake up sibling threads from the initial thread in
  * a core.
  */
 EXPORT(nlm_boot_siblings)
 	/* core L1D flush before enable threads */
 	xlp_flush_l1_dcache
 	/* Enable hw threads by writing to MAP_THREADMODE of the core */
 	li	t0, CKSEG1ADDR(RESET_DATA_PHYS)
 	lw	t1, BOOT_THREAD_MODE(t0)	/* t1 <- thread mode */
 	li	t0, ((CPU_BLOCKID_MAP << 8) | MAP_THREADMODE)
 	mfcr	t2, t0
 	or	t2, t2, t1
 	mtcr	t2, t0

 	/*
 	 * The new hardware thread starts at the next instruction
 	 * For all the cases other than core 0 thread 0, we will
 	* jump to the secondary wait function.
 	*/
 	mfc0	v0, CP0_EBASE, 1
 	andi	v0, 0x3ff		/* v0 <- node/core */

 	/* Init MMU in the first thread after changing THREAD_MODE
 	 * register (Ax Errata?)
 	 */
 	andi	v1, v0, 0x3		/* v1 <- thread id */
 	bnez	v1, 2f
 	nop

 	li	t0, MMU_SETUP
 	li	t1, 0
 	mtcr	t1, t0
 	_ehb

 2:	beqz	v0, 4f		/* boot cpu (cpuid == 0)? */
 	nop

 	/* setup status reg */
 	move	t1, zero
 #ifdef CONFIG_64BIT
 	ori	t1, ST0_KX
 #endif
 	mtc0	t1, CP0_STATUS
 	/* mark CPU ready */
 	PTR_LA	t1, nlm_cpu_ready
 	sll	v1, v0, 2
 	PTR_ADDU t1, v1
 	li	t2, 1
 	sw	t2, 0(t1)
 	/* Wait until NMI hits */
 3:	wait
 	j	3b
 	nop

 	/*
 	 * For the boot CPU, we have to restore registers and
 	 * return
 	 */
 4:	dmfc0	t0, $4, 2	/* restore SP from UserLocal */
 	li	t1, 0xfadebeef
 	dmtc0	t1, $4, 2	/* restore SP from UserLocal */
 	PTR_SUBU sp, t0, PT_SIZE
 	RESTORE_ALL
 	jr   ra
 	nop
 EXPORT(nlm_reset_entry_end)

 FEXPORT(xlp_boot_core0_siblings)	/* "Master" cpu starts from here */
 	xlp_config_lsu
 	dmtc0	sp, $4, 2		/* SP saved in UserLocal */
 	SAVE_ALL
 	sync
 	/* find the location to which nlm_boot_siblings was relocated */
 	li	t0, CKSEG1ADDR(RESET_VEC_PHYS)
 	dla	t1, nlm_reset_entry
 	dla	t2, nlm_boot_siblings
 	dsubu	t2, t1
 	daddu	t2, t0
 	/* call it */
 	jr	t2
 	nop
 	/* not reached */

 	__CPUINIT
 NESTED(nlm_boot_secondary_cpus, 16, sp)
 	/* Initialize CP0 Status */
 	move	t1, zero
 #ifdef CONFIG_64BIT
 	ori	t1, ST0_KX
 #endif
 	mtc0	t1, CP0_STATUS
 	PTR_LA	t1, nlm_next_sp
 	PTR_L	sp, 0(t1)
 	PTR_LA	t1, nlm_next_gp
 	PTR_L	gp, 0(t1)

 	/* a0 has the processor id */
 	mfc0	a0, CP0_EBASE, 1
 	andi	a0, 0x3ff		/* a0 <- node/core */
 	PTR_LA	t0, nlm_early_init_secondary
 	jalr	t0
 	nop

 	PTR_LA	t0, smp_bootstrap
 	jr	t0
 	nop
 END(nlm_boot_secondary_cpus)
 	__FINIT

 /*
  * In case of RMIboot bootloader which is used on XLR boards, the CPUs
  * be already woken up and waiting in bootloader code.
  * This will get them out of the bootloader code and into linux. Needed
  *  because the bootloader area will be taken and initialized by linux.
  */
 	__CPUINIT
 NESTED(nlm_rmiboot_preboot, 16, sp)
 	mfc0	t0, $15, 1	/* read ebase */
 	andi	t0, 0x1f	/* t0 has the processor_id() */
 	andi	t2, t0, 0x3	/* thread num */
 	sll	t0, 2		/* offset in cpu array */

 	PTR_LA	t1, nlm_cpu_ready /* mark CPU ready */
 	PTR_ADDU t1, t0
 	li	t3, 1
 	sw	t3, 0(t1)

 	bnez	t2, 1f		/* skip thread programming */
 	nop			/* for thread id != 0 */

 	/*
 	 * XLR MMU setup only for first thread in core
 	 */
 	li	t0, 0x400
 	mfcr	t1, t0
 	li	t2, 6		/* XLR thread mode mask */
 	nor	t3, t2, zero
 	and	t2, t1, t2	/* t2 - current thread mode */
 	li	v0, CKSEG1ADDR(RESET_DATA_PHYS)
 	lw	v1, BOOT_THREAD_MODE(v0) /* v1 - new thread mode */
 	sll	v1, 1
 	beq	v1, t2, 1f	/* same as request value */
 	nop			/* nothing to do */

 	and	t2, t1, t3	/* mask out old thread mode */
 	or	t1, t2, v1	/* put in new value */
 	mtcr	t1, t0		/* update core control */

 1:	wait
 	j	1b
 	nop
 END(nlm_rmiboot_preboot)
 	__FINIT
	/*
	* Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
	* reserved.
	*
	* This software is available to you under a choice of one of two
	* licenses. You may choose to be licensed under the terms of the GNU
	* General Public License (GPL) Version 2, available from the file
	* COPYING in the main directory of this source tree, or the NetLogic
	* license below:
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions
	* are met:
	*
	* 1. Redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer.
	* 2. Redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in
	* the documentation and/or other materials provided with the
	* distribution.
	*
	* THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
	* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
	* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
	* ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
	* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
	* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
	* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
	* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
	* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
	* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
	* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*/

	#include <linux/init.h>

	#include <asm/asm.h>
	#include <asm/asm-offsets.h>
	#include <asm/regdef.h>
	#include <asm/mipsregs.h>
	#include <asm/stackframe.h>
	#include <asm/asmmacro.h>
	#include <asm/addrspace.h>

	#include <asm/netlogic/common.h>

	#include <asm/netlogic/xlp-hal/iomap.h>
	#include <asm/netlogic/xlp-hal/xlp.h>
	#include <asm/netlogic/xlp-hal/sys.h>
	#include <asm/netlogic/xlp-hal/cpucontrol.h>

	#define CP0_EBASE $15
	#define SYS_CPU_COHERENT_BASE(node) CKSEG1ADDR(XLP_DEFAULT_IO_BASE) + \
	XLP_IO_SYS_OFFSET(node) + XLP_IO_PCI_HDRSZ + \
	SYS_CPU_NONCOHERENT_MODE * 4

	#define XLP_AX_WORKAROUND /* enable Ax silicon workarounds */

	/* Enable XLP features and workarounds in the LSU */
	.macro xlp_config_lsu
	li t0, LSU_DEFEATURE
	mfcr t1, t0

	lui t2, 0xc080 /* SUE, Enable Unaligned Access, L2HPE */
	or t1, t1, t2
	#ifdef XLP_AX_WORKAROUND
	li t2, ~0xe /* S1RCM */
	and t1, t1, t2
	#endif
	mtcr t1, t0

	li t0, ICU_DEFEATURE
	mfcr t1, t0
	ori t1, 0x1000 /* Enable Icache partitioning */
	mtcr t1, t0


	#ifdef XLP_AX_WORKAROUND
	li t0, SCHED_DEFEATURE
	lui t1, 0x0100 /* Disable BRU accepting ALU ops */
	mtcr t1, t0
	#endif
	.endm

	/*
	* This is the code that will be copied to the reset entry point for
	* XLR and XLP. The XLP cores start here when they are woken up. This
	* is also the NMI entry point.
	*/
	.macro xlp_flush_l1_dcache
	li t0, LSU_DEBUG_DATA0
	li t1, LSU_DEBUG_ADDR
	li t2, 0 /* index */
	li t3, 0x1000 /* loop count */
	1:
	sll v0, t2, 5
	mtcr zero, t0
	ori v1, v0, 0x3 /* way0 \| write_enable \| write_active */
	mtcr v1, t1
	2:
	mfcr v1, t1
	andi v1, 0x1 /* wait for write_active == 0 */
	bnez v1, 2b
	nop
	mtcr zero, t0
	ori v1, v0, 0x7 /* way1 \| write_enable \| write_active */
	mtcr v1, t1
	3:
	mfcr v1, t1
	andi v1, 0x1 /* wait for write_active == 0 */
	bnez v1, 3b
	nop
	addi t2, 1
	bne t3, t2, 1b
	nop
	.endm

	/*
	* The cores can come start when they are woken up. This is also the NMI
	* entry, so check that first.
	*
	* The data corresponding to reset/NMI is stored at RESET_DATA_PHYS
	* location, this will have the thread mask (used when core is woken up)
	* and the current NMI handler in case we reached here for an NMI.
	*
	* When a core or thread is newly woken up, it loops in a 'wait'. When
	* the CPU really needs waking up, we send an NMI to it, with the NMI
	* handler set to prom_boot_secondary_cpus
	*/

	.set noreorder
	.set noat
	.set arch=xlr /* for mfcr/mtcr, XLR is sufficient */

	FEXPORT(nlm_reset_entry)
	dmtc0 k0, $22, 6
	dmtc0 k1, $22, 7
	mfc0 k0, CP0_STATUS
	li k1, 0x80000
	and k1, k0, k1
	beqz k1, 1f /* go to real reset entry */
	nop
	li k1, CKSEG1ADDR(RESET_DATA_PHYS) /* NMI */
	ld k0, BOOT_NMI_HANDLER(k1)
	jr k0
	nop

	1: /* Entry point on core wakeup */
	mfc0 t0, CP0_EBASE, 1
	mfc0 t1, CP0_EBASE, 1
	srl t1, 5
	andi t1, 0x3 /* t1 <- node */
	li t2, 0x40000
	mul t3, t2, t1 /* t3 = node * 0x40000 */
	srl t0, t0, 2
	and t0, t0, 0x7 /* t0 <- core */
	li t1, 0x1
	sll t0, t1, t0
	nor t0, t0, zero /* t0 <- ~(1 << core) */
	li t2, SYS_CPU_COHERENT_BASE(0)
	add t2, t2, t3 /* t2 <- SYS offset for node */
	lw t1, 0(t2)
	and t1, t1, t0
	sw t1, 0(t2)

	/* read back to ensure complete */
	lw t1, 0(t2)
	sync

	/* Configure LSU on Non-0 Cores. */
	xlp_config_lsu
	/* FALL THROUGH */

	/*
	* Wake up sibling threads from the initial thread in
	* a core.
	*/
	EXPORT(nlm_boot_siblings)
	/* core L1D flush before enable threads */
	xlp_flush_l1_dcache
	/* Enable hw threads by writing to MAP_THREADMODE of the core */
	li t0, CKSEG1ADDR(RESET_DATA_PHYS)
	lw t1, BOOT_THREAD_MODE(t0) /* t1 <- thread mode */
	li t0, ((CPU_BLOCKID_MAP << 8) \| MAP_THREADMODE)
	mfcr t2, t0
	or t2, t2, t1
	mtcr t2, t0

	/*
	* The new hardware thread starts at the next instruction
	* For all the cases other than core 0 thread 0, we will
	* jump to the secondary wait function.
	*/
	mfc0 v0, CP0_EBASE, 1
	andi v0, 0x3ff /* v0 <- node/core */

	/* Init MMU in the first thread after changing THREAD_MODE
	* register (Ax Errata?)
	*/
	andi v1, v0, 0x3 /* v1 <- thread id */
	bnez v1, 2f
	nop

	li t0, MMU_SETUP
	li t1, 0
	mtcr t1, t0
	_ehb

	2: beqz v0, 4f /* boot cpu (cpuid == 0)? */
	nop

	/* setup status reg */
	move t1, zero
	#ifdef CONFIG_64BIT
	ori t1, ST0_KX
	#endif
	mtc0 t1, CP0_STATUS
	/* mark CPU ready */
	PTR_LA t1, nlm_cpu_ready
	sll v1, v0, 2
	PTR_ADDU t1, v1
	li t2, 1
	sw t2, 0(t1)
	/* Wait until NMI hits */
	3: wait
	j 3b
	nop

	/*
	* For the boot CPU, we have to restore registers and
	* return
	*/
	4: dmfc0 t0, $4, 2 /* restore SP from UserLocal */
	li t1, 0xfadebeef
	dmtc0 t1, $4, 2 /* restore SP from UserLocal */
	PTR_SUBU sp, t0, PT_SIZE
	RESTORE_ALL
	jr ra
	nop
	EXPORT(nlm_reset_entry_end)

	FEXPORT(xlp_boot_core0_siblings) /* "Master" cpu starts from here */
	xlp_config_lsu
	dmtc0 sp, $4, 2 /* SP saved in UserLocal */
	SAVE_ALL
	sync
	/* find the location to which nlm_boot_siblings was relocated */
	li t0, CKSEG1ADDR(RESET_VEC_PHYS)
	dla t1, nlm_reset_entry
	dla t2, nlm_boot_siblings
	dsubu t2, t1
	daddu t2, t0
	/* call it */
	jr t2
	nop
	/* not reached */

	__CPUINIT
	NESTED(nlm_boot_secondary_cpus, 16, sp)
	/* Initialize CP0 Status */
	move t1, zero
	#ifdef CONFIG_64BIT
	ori t1, ST0_KX
	#endif
	mtc0 t1, CP0_STATUS
	PTR_LA t1, nlm_next_sp
	PTR_L sp, 0(t1)
	PTR_LA t1, nlm_next_gp
	PTR_L gp, 0(t1)

	/* a0 has the processor id */
	mfc0 a0, CP0_EBASE, 1
	andi a0, 0x3ff /* a0 <- node/core */
	PTR_LA t0, nlm_early_init_secondary
	jalr t0
	nop

	PTR_LA t0, smp_bootstrap
	jr t0
	nop
	END(nlm_boot_secondary_cpus)
	__FINIT

	/*
	* In case of RMIboot bootloader which is used on XLR boards, the CPUs
	* be already woken up and waiting in bootloader code.
	* This will get them out of the bootloader code and into linux. Needed
	* because the bootloader area will be taken and initialized by linux.
	*/
	__CPUINIT
	NESTED(nlm_rmiboot_preboot, 16, sp)
	mfc0 t0, $15, 1 /* read ebase */
	andi t0, 0x1f /* t0 has the processor_id() */
	andi t2, t0, 0x3 /* thread num */
	sll t0, 2 /* offset in cpu array */

	PTR_LA t1, nlm_cpu_ready /* mark CPU ready */
	PTR_ADDU t1, t0
	li t3, 1
	sw t3, 0(t1)

	bnez t2, 1f /* skip thread programming */
	nop /* for thread id != 0 */

	/*
	* XLR MMU setup only for first thread in core
	*/
	li t0, 0x400
	mfcr t1, t0
	li t2, 6 /* XLR thread mode mask */
	nor t3, t2, zero
	and t2, t1, t2 /* t2 - current thread mode */
	li v0, CKSEG1ADDR(RESET_DATA_PHYS)
	lw v1, BOOT_THREAD_MODE(v0) /* v1 - new thread mode */
	sll v1, 1
	beq v1, t2, 1f /* same as request value */
	nop /* nothing to do */

	and t2, t1, t3 /* mask out old thread mode */
	or t1, t2, v1 /* put in new value */
	mtcr t1, t0 /* update core control */

	1: wait
	j 1b
	nop
	END(nlm_rmiboot_preboot)
	__FINIT