blob: 7b96a91f47731ac36f2b6246d831a95c575a763e [file] [log] [blame]
/*
* Copyright 2011, Netlogic Microsystems.
* Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/resource.h>
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
#include <linux/i2c.h>
#include <linux/usb/ehci_pdriver.h>
#include <linux/usb/ohci_pdriver.h>
#include <asm/netlogic/haldefs.h>
#include <asm/netlogic/xlr/iomap.h>
#include <asm/netlogic/xlr/pic.h>
#include <asm/netlogic/xlr/xlr.h>
unsigned int nlm_xlr_uart_in(struct uart_port *p, int offset)
{
uint64_t uartbase;
unsigned int value;
/* sign extend to 64 bits, if needed */
uartbase = (uint64_t)(long)p->membase;
value = nlm_read_reg(uartbase, offset);
/* See XLR/XLS errata */
if (offset == UART_MSR)
value ^= 0xF0;
else if (offset == UART_MCR)
value ^= 0x3;
return value;
}
void nlm_xlr_uart_out(struct uart_port *p, int offset, int value)
{
uint64_t uartbase;
/* sign extend to 64 bits, if needed */
uartbase = (uint64_t)(long)p->membase;
/* See XLR/XLS errata */
if (offset == UART_MSR)
value ^= 0xF0;
else if (offset == UART_MCR)
value ^= 0x3;
nlm_write_reg(uartbase, offset, value);
}
#define PORT(_irq) \
{ \
.irq = _irq, \
.regshift = 2, \
.iotype = UPIO_MEM32, \
.flags = (UPF_SKIP_TEST | \
UPF_FIXED_TYPE | UPF_BOOT_AUTOCONF),\
.uartclk = PIC_CLK_HZ, \
.type = PORT_16550A, \
.serial_in = nlm_xlr_uart_in, \
.serial_out = nlm_xlr_uart_out, \
}
static struct plat_serial8250_port xlr_uart_data[] = {
PORT(PIC_UART_0_IRQ),
PORT(PIC_UART_1_IRQ),
{},
};
static struct platform_device uart_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = xlr_uart_data,
},
};
static int __init nlm_uart_init(void)
{
unsigned long uartbase;
uartbase = (unsigned long)nlm_mmio_base(NETLOGIC_IO_UART_0_OFFSET);
xlr_uart_data[0].membase = (void __iomem *)uartbase;
xlr_uart_data[0].mapbase = CPHYSADDR(uartbase);
uartbase = (unsigned long)nlm_mmio_base(NETLOGIC_IO_UART_1_OFFSET);
xlr_uart_data[1].membase = (void __iomem *)uartbase;
xlr_uart_data[1].mapbase = CPHYSADDR(uartbase);
return platform_device_register(&uart_device);
}
arch_initcall(nlm_uart_init);
#ifdef CONFIG_USB
/* Platform USB devices, only on XLS chips */
static u64 xls_usb_dmamask = ~(u32)0;
#define USB_PLATFORM_DEV(n, i, irq) \
{ \
.name = n, \
.id = i, \
.num_resources = 2, \
.dev = { \
.dma_mask = &xls_usb_dmamask, \
.coherent_dma_mask = 0xffffffff, \
}, \
.resource = (struct resource[]) { \
{ \
.flags = IORESOURCE_MEM, \
}, \
{ \
.start = irq, \
.end = irq, \
.flags = IORESOURCE_IRQ, \
}, \
}, \
}
static struct usb_ehci_pdata xls_usb_ehci_pdata = {
.caps_offset = 0,
};
static struct usb_ohci_pdata xls_usb_ohci_pdata;
static struct platform_device xls_usb_ehci_device =
USB_PLATFORM_DEV("ehci-platform", 0, PIC_USB_IRQ);
static struct platform_device xls_usb_ohci_device_0 =
USB_PLATFORM_DEV("ohci-platform", 1, PIC_USB_IRQ);
static struct platform_device xls_usb_ohci_device_1 =
USB_PLATFORM_DEV("ohci-platform", 2, PIC_USB_IRQ);
static struct platform_device *xls_platform_devices[] = {
&xls_usb_ehci_device,
&xls_usb_ohci_device_0,
&xls_usb_ohci_device_1,
};
int xls_platform_usb_init(void)
{
uint64_t usb_mmio, gpio_mmio;
unsigned long memres;
uint32_t val;
if (!nlm_chip_is_xls())
return 0;
gpio_mmio = nlm_mmio_base(NETLOGIC_IO_GPIO_OFFSET);
usb_mmio = nlm_mmio_base(NETLOGIC_IO_USB_1_OFFSET);
/* Clear Rogue Phy INTs */
nlm_write_reg(usb_mmio, 49, 0x10000000);
/* Enable all interrupts */
nlm_write_reg(usb_mmio, 50, 0x1f000000);
/* Enable ports */
nlm_write_reg(usb_mmio, 1, 0x07000500);
val = nlm_read_reg(gpio_mmio, 21);
if (((val >> 22) & 0x01) == 0) {
pr_info("Detected USB Device mode - Not supported!\n");
nlm_write_reg(usb_mmio, 0, 0x01000000);
return 0;
}
pr_info("Detected USB Host mode - Adding XLS USB devices.\n");
/* Clear reset, host mode */
nlm_write_reg(usb_mmio, 0, 0x02000000);
/* Memory resource for various XLS usb ports */
usb_mmio = nlm_mmio_base(NETLOGIC_IO_USB_0_OFFSET);
memres = CPHYSADDR((unsigned long)usb_mmio);
xls_usb_ehci_device.resource[0].start = memres;
xls_usb_ehci_device.resource[0].end = memres + 0x400 - 1;
xls_usb_ehci_device.dev.platform_data = &xls_usb_ehci_pdata;
memres += 0x400;
xls_usb_ohci_device_0.resource[0].start = memres;
xls_usb_ohci_device_0.resource[0].end = memres + 0x400 - 1;
xls_usb_ohci_device_0.dev.platform_data = &xls_usb_ohci_pdata;
memres += 0x400;
xls_usb_ohci_device_1.resource[0].start = memres;
xls_usb_ohci_device_1.resource[0].end = memres + 0x400 - 1;
xls_usb_ohci_device_1.dev.platform_data = &xls_usb_ohci_pdata;
return platform_add_devices(xls_platform_devices,
ARRAY_SIZE(xls_platform_devices));
}
arch_initcall(xls_platform_usb_init);
#endif
#ifdef CONFIG_I2C
static struct i2c_board_info nlm_i2c_board_info1[] __initdata = {
/* All XLR boards have this RTC and Max6657 Temp Chip */
[0] = {
.type = "ds1374",
.addr = 0x68
},
[1] = {
.type = "lm90",
.addr = 0x4c
},
};
static struct resource i2c_resources[] = {
[0] = {
.start = 0, /* filled at init */
.end = 0,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device nlm_xlr_i2c_1 = {
.name = "xlr-i2cbus",
.id = 1,
.num_resources = 1,
.resource = i2c_resources,
};
static int __init nlm_i2c_init(void)
{
int err = 0;
unsigned int offset;
/* I2C bus 0 does not have any useful devices, configure only bus 1 */
offset = NETLOGIC_IO_I2C_1_OFFSET;
nlm_xlr_i2c_1.resource[0].start = CPHYSADDR(nlm_mmio_base(offset));
nlm_xlr_i2c_1.resource[0].end = nlm_xlr_i2c_1.resource[0].start + 0xfff;
platform_device_register(&nlm_xlr_i2c_1);
err = i2c_register_board_info(1, nlm_i2c_board_info1,
ARRAY_SIZE(nlm_i2c_board_info1));
if (err < 0)
pr_err("nlm-i2c: cannot register board I2C devices\n");
return err;
}
arch_initcall(nlm_i2c_init);
#endif