blob: efdd37c775ad40dd489f90c02a37c37d78ed3c5f [file] [log] [blame]
menuconfig FSL_SOC_BOOKE
bool "Freescale Book-E Machine Type"
depends on PPC_85xx || PPC_BOOK3E
select FSL_SOC
select PPC_UDBG_16550
select MPIC
select PPC_PCI_CHOICE
select FSL_PCI if PCI
select SERIAL_8250_EXTENDED if SERIAL_8250
select SERIAL_8250_SHARE_IRQ if SERIAL_8250
default y
if FSL_SOC_BOOKE
if PPC32
config FSL_85XX_CACHE_SRAM
bool
select PPC_LIB_RHEAP
help
When selected, this option enables cache-sram support
for memory allocation on P1/P2 QorIQ platforms.
cache-sram-size and cache-sram-offset kernel boot
parameters should be passed when this option is enabled.
config BSC9131_RDB
bool "Freescale BSC9131RDB"
select DEFAULT_UIMAGE
help
This option enables support for the Freescale BSC9131RDB board.
The BSC9131 is a heterogeneous SoC containing an e500v2 powerpc and a
StarCore SC3850 DSP
Manufacturer : Freescale Semiconductor, Inc
config MPC8540_ADS
bool "Freescale MPC8540 ADS"
select DEFAULT_UIMAGE
help
This option enables support for the MPC 8540 ADS board
config MPC8560_ADS
bool "Freescale MPC8560 ADS"
select DEFAULT_UIMAGE
select CPM2
help
This option enables support for the MPC 8560 ADS board
config MPC85xx_CDS
bool "Freescale MPC85xx CDS"
select DEFAULT_UIMAGE
select PPC_I8259
select HAS_RAPIDIO
help
This option enables support for the MPC85xx CDS board
config MPC85xx_MDS
bool "Freescale MPC85xx MDS"
select DEFAULT_UIMAGE
select PHYLIB
select HAS_RAPIDIO
select SWIOTLB
help
This option enables support for the MPC85xx MDS board
config MPC8536_DS
bool "Freescale MPC8536 DS"
select DEFAULT_UIMAGE
select SWIOTLB
help
This option enables support for the MPC8536 DS board
config MPC85xx_DS
bool "Freescale MPC85xx DS"
select PPC_I8259
select DEFAULT_UIMAGE
select FSL_ULI1575 if PCI
select SWIOTLB
help
This option enables support for the MPC85xx DS (MPC8544 DS) board
config MPC85xx_RDB
bool "Freescale MPC85xx RDB"
select PPC_I8259
select DEFAULT_UIMAGE
select FSL_ULI1575 if PCI
select SWIOTLB
help
This option enables support for the MPC85xx RDB (P2020 RDB) board
config P1010_RDB
bool "Freescale P1010RDB"
select DEFAULT_UIMAGE
help
This option enables support for the MPC85xx RDB (P1010 RDB) board
P1010RDB contains P1010Si, which provides CPU performance up to 800
MHz and 1600 DMIPS, additional functionality and faster interfaces
(DDR3/3L, SATA II, and PCI Express).
config P1022_DS
bool "Freescale P1022 DS"
select DEFAULT_UIMAGE
select SWIOTLB
help
This option enables support for the Freescale P1022DS reference board.
config P1022_RDK
bool "Freescale / iVeia P1022 RDK"
select DEFAULT_UIMAGE
help
This option enables support for the Freescale / iVeia P1022RDK
reference board.
config P1023_RDS
bool "Freescale P1023 RDS"
select DEFAULT_UIMAGE
help
This option enables support for the P1023 RDS board
config SOCRATES
bool "Socrates"
select DEFAULT_UIMAGE
help
This option enables support for the Socrates board.
config KSI8560
bool "Emerson KSI8560"
select DEFAULT_UIMAGE
help
This option enables support for the Emerson KSI8560 board
config XES_MPC85xx
bool "X-ES single-board computer"
select DEFAULT_UIMAGE
help
This option enables support for the various single-board
computers from Extreme Engineering Solutions (X-ES) based on
Freescale MPC85xx processors.
Manufacturer: Extreme Engineering Solutions, Inc.
URL: <http://www.xes-inc.com/>
config STX_GP3
bool "Silicon Turnkey Express GP3"
help
This option enables support for the Silicon Turnkey Express GP3
board.
select CPM2
select DEFAULT_UIMAGE
config TQM8540
bool "TQ Components TQM8540"
help
This option enables support for the TQ Components TQM8540 board.
select DEFAULT_UIMAGE
select TQM85xx
config TQM8541
bool "TQ Components TQM8541"
help
This option enables support for the TQ Components TQM8541 board.
select DEFAULT_UIMAGE
select TQM85xx
select CPM2
config TQM8548
bool "TQ Components TQM8548"
help
This option enables support for the TQ Components TQM8548 board.
select DEFAULT_UIMAGE
select TQM85xx
config TQM8555
bool "TQ Components TQM8555"
help
This option enables support for the TQ Components TQM8555 board.
select DEFAULT_UIMAGE
select TQM85xx
select CPM2
config TQM8560
bool "TQ Components TQM8560"
help
This option enables support for the TQ Components TQM8560 board.
select DEFAULT_UIMAGE
select TQM85xx
select CPM2
config SBC8548
bool "Wind River SBC8548"
select DEFAULT_UIMAGE
help
This option enables support for the Wind River SBC8548 board
config PPA8548
bool "Prodrive PPA8548"
help
This option enables support for the Prodrive PPA8548 board.
select DEFAULT_UIMAGE
select HAS_RAPIDIO
config GE_IMP3A
bool "GE Intelligent Platforms IMP3A"
select DEFAULT_UIMAGE
select SWIOTLB
select MMIO_NVRAM
select ARCH_REQUIRE_GPIOLIB
select GE_FPGA
help
This option enables support for the GE Intelligent Platforms IMP3A
board.
This board is a 3U CompactPCI Single Board Computer with a Freescale
P2020 processor.
config P2041_RDB
bool "Freescale P2041 RDB"
select DEFAULT_UIMAGE
select PPC_E500MC
select PHYS_64BIT
select SWIOTLB
select ARCH_REQUIRE_GPIOLIB
select GPIO_MPC8XXX
select HAS_RAPIDIO
select PPC_EPAPR_HV_PIC
help
This option enables support for the P2041 RDB board
config P3041_DS
bool "Freescale P3041 DS"
select DEFAULT_UIMAGE
select PPC_E500MC
select PHYS_64BIT
select SWIOTLB
select ARCH_REQUIRE_GPIOLIB
select GPIO_MPC8XXX
select HAS_RAPIDIO
select PPC_EPAPR_HV_PIC
help
This option enables support for the P3041 DS board
config P4080_DS
bool "Freescale P4080 DS"
select DEFAULT_UIMAGE
select PPC_E500MC
select PHYS_64BIT
select SWIOTLB
select ARCH_REQUIRE_GPIOLIB
select GPIO_MPC8XXX
select HAS_RAPIDIO
select PPC_EPAPR_HV_PIC
help
This option enables support for the P4080 DS board
config SGY_CTS1000
tristate "Servergy CTS-1000 support"
select GPIOLIB
select OF_GPIO
depends on P4080_DS
help
Enable this to support functionality in Servergy's CTS-1000 systems.
endif # PPC32
config P5020_DS
bool "Freescale P5020 DS"
select DEFAULT_UIMAGE
select E500
select PPC_E500MC
select PHYS_64BIT
select SWIOTLB
select ARCH_REQUIRE_GPIOLIB
select GPIO_MPC8XXX
select HAS_RAPIDIO
select PPC_EPAPR_HV_PIC
help
This option enables support for the P5020 DS board
config P5040_DS
bool "Freescale P5040 DS"
select DEFAULT_UIMAGE
select E500
select PPC_E500MC
select PHYS_64BIT
select SWIOTLB
select ARCH_REQUIRE_GPIOLIB
select GPIO_MPC8XXX
select HAS_RAPIDIO
select PPC_EPAPR_HV_PIC
help
This option enables support for the P5040 DS board
config PPC_QEMU_E500
bool "QEMU generic e500 platform"
select DEFAULT_UIMAGE
help
This option enables support for running as a QEMU guest using
QEMU's generic e500 machine. This is not required if you're
using a QEMU machine that targets a specific board, such as
mpc8544ds.
Unlike most e500 boards that target a specific CPU, this
platform works with any e500-family CPU that QEMU supports.
Thus, you'll need to make sure CONFIG_PPC_E500MC is set or
unset based on the emulated CPU (or actual host CPU in the case
of KVM).
if PPC64
config T4240_QDS
bool "Freescale T4240 QDS"
select DEFAULT_UIMAGE
select E500
select PPC_E500MC
select PHYS_64BIT
select SWIOTLB
select ARCH_REQUIRE_GPIOLIB
select GPIO_MPC8XXX
select HAS_RAPIDIO
select PPC_EPAPR_HV_PIC
help
This option enables support for the T4240 QDS board
config B4_QDS
bool "Freescale B4 QDS"
select DEFAULT_UIMAGE
select E500
select PPC_E500MC
select PHYS_64BIT
select SWIOTLB
select GPIOLIB
select ARCH_REQUIRE_GPIOLIB
select HAS_RAPIDIO
select PPC_EPAPR_HV_PIC
help
This option enables support for the B4 QDS board
The B4 application development system B4 QDS is a complete
debugging environment intended for engineers developing
applications for the B4.
endif
endif # FSL_SOC_BOOKE
config TQM85xx
bool