blob: 436a3433f8e55e5a3dedcb111614e74d928cbb3e [file] [log] [blame]
/*
* Copyright (c) 2000-2001 Vojtech Pavlik
*
* Based on the work of:
* Richard Zidlicky <Richard.Zidlicky@stud.informatik.uni-erlangen.de>
*/
/*
* Q40 PS/2 keyboard controller driver for Linux/m68k
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* Should you need to contact me, the author, you can do so either by
* e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/serio.h>
#include <linux/interrupt.h>
#include <linux/err.h>
#include <linux/bitops.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/q40_master.h>
#include <asm/irq.h>
#include <asm/q40ints.h>
#define DRV_NAME "q40kbd"
MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
MODULE_DESCRIPTION("Q40 PS/2 keyboard controller driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:" DRV_NAME);
struct q40kbd {
struct serio *port;
spinlock_t lock;
};
static irqreturn_t q40kbd_interrupt(int irq, void *dev_id)
{
struct q40kbd *q40kbd = dev_id;
unsigned long flags;
spin_lock_irqsave(&q40kbd->lock, flags);
if (Q40_IRQ_KEYB_MASK & master_inb(INTERRUPT_REG))
serio_interrupt(q40kbd->port, master_inb(KEYCODE_REG), 0);
master_outb(-1, KEYBOARD_UNLOCK_REG);
spin_unlock_irqrestore(&q40kbd->lock, flags);
return IRQ_HANDLED;
}
/*
* q40kbd_flush() flushes all data that may be in the keyboard buffers
*/
static void q40kbd_flush(struct q40kbd *q40kbd)
{
int maxread = 100;
unsigned long flags;
spin_lock_irqsave(&q40kbd->lock, flags);
while (maxread-- && (Q40_IRQ_KEYB_MASK & master_inb(INTERRUPT_REG)))
master_inb(KEYCODE_REG);
spin_unlock_irqrestore(&q40kbd->lock, flags);
}
static void q40kbd_stop(void)
{
master_outb(0, KEY_IRQ_ENABLE_REG);
master_outb(-1, KEYBOARD_UNLOCK_REG);
}
/*
* q40kbd_open() is called when a port is open by the higher layer.
* It allocates the interrupt and enables in in the chip.
*/
static int q40kbd_open(struct serio *port)
{
struct q40kbd *q40kbd = port->port_data;
q40kbd_flush(q40kbd);
/* off we go */
master_outb(-1, KEYBOARD_UNLOCK_REG);
master_outb(1, KEY_IRQ_ENABLE_REG);
return 0;
}
static void q40kbd_close(struct serio *port)
{
struct q40kbd *q40kbd = port->port_data;
q40kbd_stop();
q40kbd_flush(q40kbd);
}
static int q40kbd_probe(struct platform_device *pdev)
{
struct q40kbd *q40kbd;
struct serio *port;
int error;
q40kbd = kzalloc(sizeof(struct q40kbd), GFP_KERNEL);
port = kzalloc(sizeof(struct serio), GFP_KERNEL);
if (!q40kbd || !port) {
error = -ENOMEM;
goto err_free_mem;
}
q40kbd->port = port;
spin_lock_init(&q40kbd->lock);
port->id.type = SERIO_8042;
port->open = q40kbd_open;
port->close = q40kbd_close;
port->port_data = q40kbd;
port->dev.parent = &pdev->dev;
strlcpy(port->name, "Q40 Kbd Port", sizeof(port->name));
strlcpy(port->phys, "Q40", sizeof(port->phys));
q40kbd_stop();
error = request_irq(Q40_IRQ_KEYBOARD, q40kbd_interrupt, 0,
DRV_NAME, q40kbd);
if (error) {
dev_err(&pdev->dev, "Can't get irq %d.\n", Q40_IRQ_KEYBOARD);
goto err_free_mem;
}
serio_register_port(q40kbd->port);
platform_set_drvdata(pdev, q40kbd);
printk(KERN_INFO "serio: Q40 kbd registered\n");
return 0;
err_free_mem:
kfree(port);
kfree(q40kbd);
return error;
}
static int q40kbd_remove(struct platform_device *pdev)
{
struct q40kbd *q40kbd = platform_get_drvdata(pdev);
/*
* q40kbd_close() will be called as part of unregistering
* and will ensure that IRQ is turned off, so it is safe
* to unregister port first and free IRQ later.
*/
serio_unregister_port(q40kbd->port);
free_irq(Q40_IRQ_KEYBOARD, q40kbd);
kfree(q40kbd);
platform_set_drvdata(pdev, NULL);
return 0;
}
static struct platform_driver q40kbd_driver = {
.driver = {
.name = "q40kbd",
.owner = THIS_MODULE,
},
.remove = q40kbd_remove,
};
module_platform_driver_probe(q40kbd_driver, q40kbd_probe);